Breno Leitao [Mon, 8 Jun 2026 09:32:05 +0000 (02:32 -0700)]
rds: mark snapshot pages dirty in rds_info_getsockopt()
rds_info_getsockopt() pins the destination user pages with FOLL_WRITE and
the RDS_INFO_* producers memcpy the snapshot into them through
kmap_atomic(). Because that copy goes through the kernel direct map, the
dirty bit on the user PTE is never set, so unpin_user_pages() releases the
pages without marking them dirty. A file-backed destination page can then
be reclaimed without writeback, silently discarding the copied data.
Use unpin_user_pages_dirty_lock() with make_dirty=true so the modified
pages are marked dirty before they are unpinned.
Eric Dumazet [Mon, 8 Jun 2026 16:46:13 +0000 (16:46 +0000)]
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address.
Fixes: fbe68ee87522 ("vti6: Add a lookup method for tunnels with wildcard endpoints.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://patch.msgid.link/20260608164613.933023-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Mon, 8 Jun 2026 15:59:52 +0000 (15:59 +0000)]
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight.
Xiang Mei [Sun, 7 Jun 2026 05:44:28 +0000 (22:44 -0700)]
tun: zero the whole vnet header in tun_put_user()
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration.
Fixes: 288f30435132 ("tun: enable gso over UDP tunnel support.") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260607054428.3050243-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Weiming Shi [Sat, 6 Jun 2026 19:24:48 +0000 (12:24 -0700)]
net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion
rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.
RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them.
Fixes: 20c72bd5f5f9 ("RDS: Implement masked atomic operations") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260606192447.1179255-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kyle Zeng [Sun, 7 Jun 2026 02:18:19 +0000 (19:18 -0700)]
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac5a ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs") Signed-off-by: Kyle Zeng <kylebot@openai.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Sun, 7 Jun 2026 23:03:47 +0000 (19:03 -0400)]
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch.
Eric Dumazet [Mon, 8 Jun 2026 15:59:18 +0000 (15:59 +0000)]
ip6_vti: set netns_immutable on the fallback device.
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab34948 ("vti6: Enable namespace changing") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").
Fixes: df2185771439 ("[SCTP]: Update association lookup to look at ASCONF chunks as well") Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20260608122234.459098-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kyle Meyer [Fri, 5 Jun 2026 22:25:24 +0000 (17:25 -0500)]
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
Wyatt Feng [Fri, 5 Jun 2026 05:53:42 +0000 (13:53 +0800)]
sctp: stream: fully roll back denied add-stream state
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions.
Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/d78954ecd94954653ee299400e98d74a03a6f7d3.1780603399.git.bronzed_45_vested@icloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: mctp: usb: minor fixes for MCTP over USB transport driver
This series adds a couple of fixes in the ndo_open / ndo_stop path for
the MCTP over USB transport, where we are incorrectly sequencing two
error cases.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Jeremy Kerr [Mon, 8 Jun 2026 01:25:41 +0000 (09:25 +0800)]
net: mctp: usb: don't fail mctp_usb_rx_queue on a deferred submission
In the ndo_open path, a deferred queue open will report a failure, and
so the netdev will not be ndo_stop()ed, leaving us with the rx_retry
work potentially pending.
Don't report a deferred queue as an error, as we are still operational.
This means we use the ndo_stop() path for future cleanup, which handles
rx_retry_work cancellation.
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb.
Anton Leontev [Thu, 4 Jun 2026 16:59:38 +0000 (19:59 +0300)]
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added.
Dawei Feng [Thu, 4 Jun 2026 14:37:56 +0000 (22:37 +0800)]
octeontx2-af: fix memory leak in rvu_setup_hw_resources()
If rvu_npc_exact_init() fails in rvu_setup_hw_resources(), the function
returns directly instead of jumping to the error handling path. This
causes a resource leak for the previously initialized CGX, NPC, fwdata,
and MSI-X states.
Fix this by replacing the direct return with goto cgx_err to ensure
proper cleanup.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
access to Marvell OcteonTX2 RVU AF hardware to test with, no runtime
testing was able to be performed.
Fixes: 3571fe07a090 ("octeontx2-af: Drop rules for NPC MCAM") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn> Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Link: https://patch.msgid.link/20260604143756.1524482-1-dawei.feng@seu.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Howells [Thu, 4 Jun 2026 11:46:00 +0000 (12:46 +0100)]
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs") Reported-by: Michael Bommarito <michael.bommarito@gmail.com> Link: https://lore.kernel.org/r/20260513180907.2061972-1-michael.bommarito@gmail.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: stable@kernel.org Link: https://patch.msgid.link/105362.1780573560@warthog.procyon.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chih Kai Hsu [Thu, 4 Jun 2026 09:22:47 +0000 (17:22 +0800)]
r8152: handle the return value of usb_reset_device()
If usb_reset_device() returns a negative error code, stop the
process of probing.
Fixes: 10c3271712f5 ("r8152: disable the ECM mode") Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adrian Moreno [Thu, 4 Jun 2026 12:19:46 +0000 (14:19 +0200)]
net: openvswitch: fix possible kfree_skb of ERR_PTR
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value.
Kyle Zeng [Fri, 5 Jun 2026 07:34:48 +0000 (00:34 -0700)]
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb.
Fixes: 14909664e4e1 ("sit: Setup and TX path for sit/UDP foo-over-udp encapsulation") Signed-off-by: Kyle Zeng <kylebot@openai.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6eb9ca986d80f6f88cf9@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260605073448.6524-1-kylebot@openai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fushuai Wang [Fri, 5 Jun 2026 10:21:12 +0000 (18:21 +0800)]
net/mlx5: Use effective affinity mask for IRQ selection
When a sf is created after a CPU has been taken offline, the IRQ pool may
contain IRQs with affinity masks that include the offline CPU. Since only
online CPUs should be considered for IRQ placement, cpumask_subset() check
would fail because the iter_mask contains offline CPUs that are not present
in req_mask, causing sf creation to fail.
This is an example:
1. When mlx5 driver loads, it initializes the IRQ pools.
For sf_ctrl_pool with ≤64 sf:
- xa_num_irqs = {N, N} (There is only one slot)
2. When the first SF is created:
- The ctrl IRQ is allocated with mask=cpu_online_mask={0-191}
2. We take CPU 20 offline
3. Existing ctl irq still have mask={0-191}
4. Create a new SF:
- req_mask={0-19,21-191}
- iter_mask={0-191}
- {0-191} is NOT a subset of {0-19,21-191}
- least_loaded_irq=NULL
5. Try to allocate a new irq via irq_pool_request_irq()
6. xa_alloc() fails because the pool is full(There is only one slot)
7. sf creation fails with error
Use irq_get_effective_affinity_mask() instead, which returns the IRQ's
actual effective affinity that already excludes offline CPUs.
Fixes: 061f5b23588a ("net/mlx5: SF, Use all available cpu for setting cpu affinity") Suggested-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260605102112.91772-1-fushuai.wang@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Thu, 4 Jun 2026 13:54:46 +0000 (16:54 +0300)]
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed.
Dragos Tatulea [Thu, 4 Jun 2026 13:58:49 +0000 (16:58 +0300)]
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max.
Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260604135849.458060-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mingyu Wang [Thu, 4 Jun 2026 06:48:01 +0000 (14:48 +0800)]
net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.)
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260604064801.1180388-1-w15303746062@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: phy: some cleanups following phy_port SFP
While posting the v11 of phy_port netlink, sashiko found some
pre-existing issues, and following the tentative fix, Nicolai found
some more :)
This is V3, with a re-ordering of the port/sfp cleanup, as well as a new
patch (patch 3) that also reorders the phy_remove() path.
====================
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de> Fixes: bad869b5e41a ("net: phy: Only rely on phy_port for PHY-driven SFP") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260604092819.723505-5-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: Clean the phy_ports after unregistering the downstream SFP bus
As reported by sashiko when looking a other patches, we need to ensure
that the downstream SFP bus gets unregistered prior to destroying the
phy_ports attached to a phy_device, as the SFP code may reference these
ports. Let's make sure we follow that ordering in phy_remove().
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves.
Jakub Kicinski [Sat, 6 Jun 2026 01:21:24 +0000 (18:21 -0700)]
netdev: fix double-free in netdev_nl_bind_rx_doit()
Sashiko flags that genlmsg_reply() always consumes the skb.
The error path calls nlmsg_free(rsp) so we can't jump directly
to it. Let's not unbind, just propagate the error to the user.
This is the typical way of handling genlmsg_reply() failures.
They shouldn't happen unless user does something silly like
calling the kernel with an already-full rcvbuf.
Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: 170aafe35cb9 ("netdev: support binding dma-buf to netdevice") Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Santosh Kalluri [Thu, 4 Jun 2026 00:08:43 +0000 (17:08 -0700)]
net: phonet: free phonet_device after RCU grace period
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type.
Rosen Penev [Wed, 3 Jun 2026 22:12:17 +0000 (15:12 -0700)]
net: ibm: emac: Fix use-after-free during device removal
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device
Fixes: a4dd8535a527 ("net: ibm: emac: use devm for register_netdev") Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx4_init_user_cqes() fills a scratch buffer with the CQE
initialization pattern and then copies from that buffer to userspace.
In the single-copy path, the copy length is array_size(entries,
cqe_size), but the scratch buffer is allocated with PAGE_SIZE. GCC 10
does not carry the branch invariant strongly enough through the object
size checks and falsely triggers __bad_copy_from().
Size the scratch buffer to the actual copy length for the active path,
keep array_size() for the single-copy case, and retain a WARN_ON_ONCE()
guard for the PAGE_SIZE invariant before allocating the buffer.
Fixes: f69bf5dee7ef ("net/mlx4: Use array_size() helper in copy_to_user()") Signed-off-by: Yao Sang <sangyao@kylinos.cn> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HanQuan [Thu, 4 Jun 2026 14:46:25 +0000 (14:46 +0000)]
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling.
Fixes: 8d95dc474f85 ("net: add code for TCP fraglist GRO") Reported-by: HanQuan <eilaimemedsnaimel@gmail.com> Reported-by: MingXuan <bwnie0730@outlook.com> Signed-off-by: HanQuan <eilaimemedsnaimel@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 5 Jun 2026 11:21:34 +0000 (11:21 +0000)]
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Tamir Shahar <tamirthesis@gmail.com> Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Yonghong Song <yonghong.song@linux.dev> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chenguang Zhao [Wed, 3 Jun 2026 01:13:53 +0000 (09:13 +0800)]
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection.
Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta [Thu, 4 Jun 2026 16:37:09 +0000 (22:07 +0530)]
bnge: fix context mem iteration
The firmware advertises context memory (backing store) types
through a linked list, with BNGE_CTX_INV serving as the
end-of-list sentinel.
However, the driver incorrectly assumes that the list is strictly
ordered and prematurely terminates traversal when it encounters
an unrecognized type (>=BNGE_CTX_V2_MAX). As a result, any valid
context types that appear later in the chain are silently skipped,
leading to incomplete memory configuration and eventual driver load
failure.
Fix this by traversing the entire list until the BNGE_CTX_INV sentinel
is reached, while safely ignoring only those context types that fall
outside the supported range.
Fixes: 29c5b358f385 ("bng_en: Add backing store support") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dma_rmb() barrier after req_id completion check in
ena_com_phc_get_timestamp(). On weakly-ordered architectures,
payload fields may be read before req_id is observed as updated.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver") Closes: https://sashiko.dev/#/patchset/20260430032507.11586-1-akiyano%40amazon.com Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ZhaoJinming [Thu, 4 Jun 2026 07:03:52 +0000 (15:03 +0800)]
net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues()
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block.
Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory") Cc: stable@vger.kernel.org Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alok Tiwari [Tue, 2 Jun 2026 22:55:11 +0000 (15:55 -0700)]
idpf: fix mailbox capability for set device clock time
The current code incorrectly uses VIRTCHNL2_CAP_PTP_SET_DEVICE_CLK_TIME
for both direct and mailbox capabilities, causing mailbox-only support
to be ignored and potentially reporting IDPF_PTP_NONE.
Fixes: d5dba8f7206da ("idpf: add PTP clock configuration") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260602225513.393338-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Oros [Tue, 2 Jun 2026 22:55:10 +0000 (15:55 -0700)]
ice: fix missing priority callbacks for U.FL DPLL pins
The U.FL2 input pin advertises DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE
in its capability mask, but ice_dpll_pin_ufl_ops does not provide
.prio_get and .prio_set callbacks. As a result the DPLL subsystem
cannot report or accept priority for U.FL pins: pin-get omits the prio
field on U.FL2 and pin-set with prio is rejected as invalid, even
though the capability is present. This prevents user space from using
priority to select or disable U.FL2 as a DPLL input source.
Reproducer with iproute2 (dpll command):
# dpll pin show board-label U.FL2
pin id 16:
module-name ice
board-label U.FL2
type ext
capabilities priority-can-change|state-can-change
parent-device:
id 0 direction input state selectable phase-offset 0
/* note: no "prio" between "direction" and "state",
even though priority-can-change is advertised */
# dpll pin set id 16 parent-device 0 prio 5
RTNETLINK answers: Operation not supported
After the fix the prio field is reported by pin show and pin set with
prio is accepted on U.FL2.
Add the missing .prio_get and .prio_set callbacks to
ice_dpll_pin_ufl_ops, reusing ice_dpll_sw_input_prio_{get,set}. The
same ops struct is shared by U.FL1 and U.FL2: U.FL2 (input) delegates
to the backing hardware input pin, while U.FL1 (output) does not
advertise DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE so the dpll core
capability gate never invokes prio_set for it, and prio_get reports
the OUTPUT sentinel (ICE_DPLL_PIN_PRIO_OUTPUT) on the output side
exactly like the SMA path does today.
Fixes: 2dd5d03c77e2 ("ice: redesign dpll sma/u.fl pins control") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260602225513.393338-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Platform devices created with platform_device_alloc() call
platform_device_release() when the last reference to the device's
kobject is dropped. This function calls of_node_put() unconditionally.
This works fine for devices created with platform_device_register_full()
but users of the split approach (platform_device_alloc() +
platform_device_add()) must bump the reference of the of_node they
assign manually. Add the missing call to of_node_get().
Hyunwoo Kim [Tue, 2 Jun 2026 10:21:05 +0000 (19:21 +0900)]
inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there.
Cc: stable@vger.kernel.org Fixes: 006a5035b495 ("inet: frags: flush pending skbs in fqdir_pre_exit()") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Link: https://patch.msgid.link/ah6ukYq5G98LshdA@v4bel Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 4 Jun 2026 21:35:55 +0000 (14:35 -0700)]
Merge tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Linus Torvalds [Thu, 4 Jun 2026 20:38:42 +0000 (13:38 -0700)]
Merge tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
Linus Torvalds [Thu, 4 Jun 2026 19:31:20 +0000 (12:31 -0700)]
Merge tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Enable IOMMUFD and VFIO cdev such that PCI pass-through to
QEMU/KVM can optionally utilize native IOMMUFD
- With HAVE_ARCH_BUG_FORMAT enabled the BUG infrastructure might
misinterpret flags or fault. Fix this by moving the "format"
field emission into __BUG_ENTRY()
- The generic version of _THIS_IP_ is known to be brittle and may
break with current and future GCC and Clang optimizations. Fix
it by overriding _THIS_IP_
* tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Implement _THIS_IP_ using inline asm
s390/bug: Always emit format word in __BUG_ENTRY
s390/configs: Enable IOMMUFD and VFIO cdev in defconfigs
Breno reports a lockdep warning in bnxt. During FW reset the driver
may end up calling netif_set_real_num_tx_queues() (if queue count
changes), so calls to bnxt_open() still require rtnl_lock.
Sechang Lim [Wed, 3 Jun 2026 16:27:33 +0000 (16:27 +0000)]
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above.
Fixes: 965b57b469a5 ("net: Introduce a new proto_ops ->read_skb()") Cc: stable@vger.kernel.org Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260603162737.697215-1-rhkrqnwk98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Wed, 3 Jun 2026 18:11:44 +0000 (14:11 -0400)]
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reported-by: Yuqi Xu <xuyq21@lenovo.com> Reported-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These fields are updated asynchronously by the bonding state machine
in ad_churn_machine() while holding bond->mode_lock.
bond_info_show_slave() and bond_fill_slave_info() read them without
bond->mode_lock being held, we need to add READ_ONCE() and
WRITE_ONCE() annotations.
Note that AD_CHURN_MONITOR, AD_CHURN, and AD_NO_CHURN are defined
exclusively in (kernel private) include/net/bond_3ad.h header.
They should be moved to include/uapi/linux/if_bonding.h or userspace
tools will have to hardcode their values.
Fixes: 4916f2e2f3fc ("bonding: print churn state via netlink") Fixes: 14c9551a32eb ("bonding: Implement port churn-machine (AD standard 43.4.17).") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260603123514.388226-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yizhou Zhao [Wed, 3 Jun 2026 06:00:13 +0000 (14:00 +0800)]
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration.
Fixes: febf018d2234 ("net/802: Implement Multiple Registration Protocol (MRP)") Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Link: https://patch.msgid.link/20260603060016.21522-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Lai [Wed, 3 Jun 2026 06:18:16 +0000 (14:18 +0800)]
rtase: Avoid sleeping in get_stats64()
The .ndo_get_stats64 callback must not sleep because it can be
called when reading /proc/net/dev.
rtase_get_stats64() calls rtase_dump_tally_counter(), which polls
the tally counter dump bit with read_poll_timeout(). This may
sleep while waiting for the hardware counter dump to complete.
Use read_poll_timeout_atomic() instead to avoid sleeping in the
get_stats64() path.
Eric Dumazet [Wed, 3 Jun 2026 07:29:55 +0000 (07:29 +0000)]
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit().
Ido Schimmel [Wed, 3 Jun 2026 10:18:11 +0000 (13:18 +0300)]
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
When a vxlan device has vnifilter enabled, userspace observers
(e.g., bridge monitor vni) miss VNI add events and see spurious
notifications on no-op VNI re-adds.
Patch 1 fixes the missing notification on VNI add: vxlan_vni_add()
guarded the notification on a 'changed' flag that vxlan_vni_update_group()
only sets when a multicast group or remote is supplied, so VNIs added
without a group (e.g., L3 VXLAN) were silently created.
Patch 2 fixes the spurious notification on VNI update: vxlan_vni_update()
tested 'if (changed)' against a bool pointer instead of dereferencing it,
so every re-add produced a notification regardless of whether anything
actually changed.
Patch 3 adds a selftest covering both bugs along with a few related
cases (add with remote, remote update, delete-nonexistent).
====================
Andy Roulin [Tue, 2 Jun 2026 18:51:38 +0000 (11:51 -0700)]
selftests: net: add vxlan vnifilter notification test
Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Andy Roulin [Tue, 2 Jun 2026 18:51:37 +0000 (11:51 -0700)]
vxlan: vnifilter: fix spurious notification on VNI update
When a VNI is re-added with the same attributes (e.g. same group or no
group), vxlan_vni_update() sends a spurious RTM_NEWTUNNEL notification
even though nothing changed.
The bug is that 'if (changed)' tests whether the pointer is non-NULL,
not the bool value it points to. Since every caller passes a valid
pointer, the condition is always true and the notification fires
unconditionally.
Fix by dereferencing the pointer: 'if (*changed)'.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100
# bridge vni add vni 1000 dev vxlan100 # spurious notification
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260602185138.253265-3-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Roulin [Tue, 2 Jun 2026 18:51:36 +0000 (11:51 -0700)]
vxlan: vnifilter: send notification on VNI add
When a new VNI is added to a vxlan device with vnifilter enabled,
no RTM_NEWTUNNEL notification is sent to userspace. This means
'bridge monitor vni' never shows VNI add events, even though
VNI delete events are reported correctly.
The bug is in vxlan_vni_add(), where the notification is guarded by
'if (changed)'. The 'changed' flag is set by vxlan_vni_update_group()
only when the multicast group or remote IP is modified, but for a
new VNI added without a group (e.g. in L3 VxLAN interface scenarios),
the function returns early without setting changed=true. Since this
is a new VNI, the notification should be sent unconditionally.
The notification is not guarded by the return value of
vxlan_vni_update_group() because, at this point, the VNI has already
been inserted into the hash table and list with no rollback on error.
The VNI will be visible in 'bridge vni show' regardless, so userspace
should be informed. This is consistent with vxlan_vni_del() which also
notifies unconditionally.
The 'if (changed)' guard remains correct in vxlan_vni_update(), which
handles the case where a VNI already exists and is being re-added --
there, we only want to notify if the group/remote actually changed.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100 # no notification
# bridge vni delete vni 1000 dev vxlan100 # notification received
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Reported-by: Chirag Shah <chirag@nvidia.com> Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260602185138.253265-2-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
Use the CPT-aware NIX channel mask in the npc_install_flow path so that
when the host PF installs steering rules in kernel for a VF used from
userspace (e.g. DPDK), MCAM entries see the same channel mask semantics as
other RX paths.
Fixes: 56bcef528bd8 ("octeontx2-af: Use npc_install_flow API for promisc and broadcast entries") Cc: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260602045853.1558530-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Tue, 2 Jun 2026 01:06:06 +0000 (21:06 -0400)]
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during later parameter handling (e.g. STATE_COOKIE
processing and kmemdup() copies).
Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT
chunk length does not exceed the available data in the COOKIE_ECHO
buffer before it is used.
Rajat Gupta [Sun, 31 May 2026 12:32:21 +0000 (08:32 -0400)]
net/sched: fix pedit partial COW leading to page cache corruption
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Reported-by: Yiming Qian <yimingqian591@gmail.com> Reported-by: Keenan Dong <keenanat2000@gmail.com> Reported-by: Han Guidong <2045gemini@gmail.com> Reported-by: Zhang Cen <rollkingzzc@gmail.com> Reviewed-by: Han Guidong <2045gemini@gmail.com> Tested-by: Han Guidong <2045gemini@gmail.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com> Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raf Dickson [Tue, 26 May 2026 10:43:56 +0000 (10:43 +0000)]
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.
ZhaoJinming [Mon, 1 Jun 2026 08:56:49 +0000 (16:56 +0800)]
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
Eva Kurchatova [Wed, 3 Jun 2026 15:31:42 +0000 (18:31 +0300)]
tracing: Fix CFI violation in probestub being called by tprobes
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section. objtool
explicitly ignores that section and when processing functions in the
kernel, if it detects one that has no references it will seal it to have
its ENDBR stripped on boot up.
This means when a tprobe is attached to the sched_wakeup tracepoint, when it
is triggered it will call __probestub_sched_wakeup and due to the missing
ENDBR on a CFI-enabled machine it will take a #CP exception.
Fix this by adding CFI_NOSEAL annotation to probestub declaration.
Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://patch.msgid.link/20260603153147.573589-1-eva.kurchatova@virtuozzo.com Fixes: d5173f753750 ("objtool: Exclude __tracepoints data from ENDBR checks") Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
[ Updated change log ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Antoine Tenart [Fri, 29 May 2026 14:47:00 +0000 (16:47 +0200)]
geneve: fix length used in GRO hint UDP checksum adjustment
In geneve_post_decap_hint the length used for adjusting the UDP checksum
should be 'skb->len - gro_hint->nested_tp_offset' (UDP length) instead
of 'skb->len - gro_hint->nested_nh_offset' (IP length).
Fixes: fd0dd796576e ("geneve: use GRO hint option in the RX path") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260521131436.748832-1-jhs%40mojatatu.com Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260529144713.780938-1-atenart@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
Fix use-after-free in metadata dst teardown in airoha_eth and mtk_eth_soc drivers
airoha_metadata_dst_free() and mtk_free_dev() call metadata_dst_free()
which frees the metadata_dst with kfree() immediately, bypassing the RCU
grace period.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path and runs call_rcu_hurry() if refcount goes to
zero.
====================
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
Jakub Kicinski [Thu, 4 Jun 2026 02:07:46 +0000 (19:07 -0700)]
Merge tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: fix memory leak in error path of hci_alloc_dev()
- hci_sync: reject oversized Broadcast Announcement prepend
- MGMT: Fix backward compatibility with userspace
- MGMT: validate advertising TLV before type checks
- L2CAP: reject BR/EDR signaling packets over MTUsig
- RFCOMM: validate skb length in MCC handlers
- RFCOMM: hold listener socket in rfcomm_connect_ind()
- ISO: Fix not releasing hdev reference on iso_conn_big_sync
- ISO: Fix a use-after-free of the hci_conn pointer
- ISO: Fix data-race on iso_pi fields in hci_get_route calls
- SCO: Fix data-race on sco_pi fields in sco_connect
- BNEP: reject short frames before parsing
* tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix backward compatibility with userspace
Bluetooth: SCO: Fix data-race on sco_pi fields in sco_connect
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Bluetooth: bnep: reject short frames before parsing
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
Bluetooth: RFCOMM: validate skb length in MCC handlers
Bluetooth: MGMT: validate advertising TLV before type checks
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
====================
Jakub Kicinski [Thu, 4 Jun 2026 02:07:34 +0000 (19:07 -0700)]
Merge tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Things are finally quieting down:
- iwlwifi:
- FW reset handshake removal for older devices
- NIC access fix in fast resume
- avoid too large command for some BIOSes
- fix TX power constraints in AP mode
- cfg80211:
- fix netlink parse overflow
- fix potential 6 GHz scan memory leak
- enforce HE/EHT consistency to avoid mac80211 crash
- mac80211: guard radiotap antenna parsing
* tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
wifi: fix leak if split 6 GHz scanning fails
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
wifi: nl80211: reject oversized EMA RNR lists
wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used
wifi: iwlwifi: mvm: avoid oversized UATS command copy
wifi: iwlwifi: mld: send tx power constraints before link activation
wifi: iwlwifi: mvm: don't support the reset handshake for old firmwares
====================
Jakub Kicinski [Thu, 4 Jun 2026 02:04:46 +0000 (19:04 -0700)]
Merge branch 'mptcp-misc-fixes-for-v7-1-rc7'
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc7
Here are various unrelated fixes:
- Patch 1: fix missing wakeups when multiple threads are reading from
the same fd. A fix for v5.7.
- Patch 2: fix retransmission loop when MPTCP checksum is enabled. A fix
for v5.14.
- Patch 3: fix a TOCTOU race while computing rcv_wnd. A fix for v5.11.
- Patch 4: allow subflows receive window to shrink if needed. A fix for
v5.19.
- Patches 5-6: avoid 'extra_subflows' to underflow with the userspace
PM. A fix for v5.19.
- Patch 7: report errors if one subflow cannot set SO_TIMESTAMPING. A
fix for v5.14.
- Patch 8: try to set TCP_MAXSEG on all subflows, before reporting
errors, if any. A fix for v6.17.
- Patch 9: check desc->count in read_sock, to act as expected. A fix
for v7.0.
- Patch 10: fix an uninit value in mptcp_established_options, reported
by syzbot. A fix for v7.1-rc1.
- Patch 11: fix a similar issue than the previous patch, exposed by the
same modification from v7.1-rc1, but was already causing issues since
v5.15.
====================
When an ADD_ADDR needs to be sent, it could be prepared if there is
enough remaining space and even if the packet is not a pure ACK. But it
would be dropped soon after.
Indeed, in mptcp_pm_add_addr_signal(), there is enough space to fit a
DSS of 20 octets and an ADD_ADDR echo containing an IPv4 address on 8
octets for example. In this case, the packet would be prepared, the
MPTCP_ADD_ADDR_ECHO bit would be removed from pm->addr_signal, but the
option would be silently dropped in mptcp_established_options_add_addr()
not to override DSS info in the union from 'struct mptcp_out_options',
and also because mptcp_write_options() will enforce mutually exclusion
with DSS.
Instead, don't even try to send an ADD_ADDR if it is not a pure ACK.
Retry for each new packet until a pure-ACK is emitted. That's fine to do
that, because each time an ADD_ADDR (echo) is scheduled, a pure ACK is
queued.
This also simplifies the code, and the skb checks can be done earlier,
before the lock.
Note: also, since commit 6d0060f600ad ("mptcp: Write MPTCP DSS headers
to outgoing data packets"), opts->ahmac would not have been set to 0
when other suboptions were not dropped, and when sending an ADD_ADDR
echo. That would have resulted in sending an ADD_ADDR using garbage
info, where there was not enough space, instead of an echo one without
the ADD_ADDR HMAC.
Local variable opts created at:
__tcp_transmit_skb+0x4d/0x5fe0 net/ipv4/tcp_output.c:1536
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
The output path currently omits initializing the mptcp extension
`use_map` flag in a few corner cases.
Address the issue always zeroing all the extensions flags before
eventually initializing the individual bits. To that extent, introduce
and use a struct_group to avoid multiple bitwise operations.
Gang Yan [Tue, 2 Jun 2026 12:14:16 +0000 (22:14 +1000)]
mptcp: check desc->count in read_sock
__tcp_read_sock() checks desc->count after each skb is consumed and
breaks the loop when it reaches 0. The MPTCP variant lacks this check.
This is a functional bug, other subsystems also rely on this check:
TLS strparser sets desc->count to 0 once a full TLS record is assembled
and depends on this break to stop reading.
Add the same desc->count check to __mptcp_read_sock(), mirroring
__tcp_read_sock().
The mptcp_setsockopt_all_sf(), currently used only with TCP_MAXSEG,
stopped when one subflow returned an error.
Even if it is not wrong, this is different from the other helpers trying
to set the option on all subflows, and then returning an error if at
least one of them had an issue.
Follow this behaviour, for a question of uniformity.
sock_set_timestamping() can fail for different reasons. The returned
value should then be checked.
If sock_set_timestamping() fails for at least one subflow, the first
error is now reported to the userspace, similar to what is done with
other socket options.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows") Cc: stable@vger.kernel.org Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Closes: https://lore.kernel.org/willemdebruijn.kernel.178a41a53d041@gmail.com Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-7-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Cui [Tue, 2 Jun 2026 12:14:13 +0000 (22:14 +1000)]
selftests: mptcp: add test for extra_subflows underflow on userspace PM
Add a test to verify that when userspace PM fails to create a subflow
(e.g. using an unreachable address), the extra_subflows counter is not
decremented below zero.
Fixes: 77e4b94a3de6 ("mptcp: update userspace pm infos") Cc: stable@vger.kernel.org Signed-off-by: Tao Cui <cuitao@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-6-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Cui [Tue, 2 Jun 2026 12:14:12 +0000 (22:14 +1000)]
mptcp: pm: fix extra_subflows underflow on userspace PM subflow creation
The userspace PM increments extra_subflows after __mptcp_subflow_connect()
succeeds, but __mptcp_subflow_connect() calls mptcp_pm_close_subflow()
on failure to roll back the pre-increment done by the kernel PM's fill_*()
helpers. Because the userspace PM hasn't incremented yet at that point,
this decrement is spurious and causes extra_subflows to underflow.
Fix it by aligning the userspace PM with the kernel PM: increment
extra_subflows before calling __mptcp_subflow_connect(), so the existing
error path in subflow.c correctly rolls it back on failure. Also simplify
the error handling by taking pm.lock only when needed for cleanup.
Fixes: 77e4b94a3de6 ("mptcp: update userspace pm infos") Cc: stable@vger.kernel.org Signed-off-by: Tao Cui <cuitao@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-5-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:11 +0000 (22:14 +1000)]
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting.
Fixes: f3589be0c420 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-4-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:10 +0000 (22:14 +1000)]
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack.
Fixes: fa3fe2b15031 ("mptcp: track window announced to peer") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-3-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:09 +0000 (22:14 +1000)]
mptcp: fix retransmission loop when csum is enabled
Sashiko noted that retransmission with csum enabled can actually
transmit new data, but currently the relevant code does not update
accordingly snd_nxt.
The may cause incoming ack drop and an endless retransmission loop.
Paolo Abeni [Tue, 2 Jun 2026 12:14:08 +0000 (22:14 +1000)]
mptcp: fix missing wakeups in edge scenarios
The mptcp_recvmsg() can fill MPTCP socket receive queue via
mptcp_move_skbs(), but currently does not try to wakeup any listener,
because the same process is going to check the receive queue soon.
When multiple threads are reading from the same fd, the above can
cause stall. Add the missing wakeup.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-1-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt Kanzenbach [Fri, 29 May 2026 17:11:47 +0000 (19:11 +0200)]
ptp: vclock: Switch from RCU to SRCU
The usage of PTP vClocks leads immediately to the following issues with
ptp4l with LOCKDEP and DEBUG_ATOMIC_SLEEP enabled: "BUG: sleeping function
called from invalid context".
ptp_convert_timestamp() acquires a mutex_t within a RCU read section. This
is illegal, because acquiring a mutex_t can result in voluntary scheduling
request which is not allowed within a RCU read section.
Replace the RCU usage with SRCU where sleeping is allowed.
Reported-by: Florian Zeitz <florian.zeitz@schettke.com> Closes: https://lore.kernel.org/all/00a8cce8-410e-4038-98af-49be6d93d7bd@schettke.com/ Fixes: 67d93ffc0f3c ("ptp: vclock: use mutex to fix "sleep on atomic" bug") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20260529-vclock_rcu-v2-1-02a5531fab92@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 2 Jun 2026 16:15:47 +0000 (16:15 +0000)]
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Tamir Shahar <tamirthesis@gmail.com> Reported-by: Amit Klein <aksecurity@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260602161547.2642155-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianyu Li [Mon, 1 Jun 2026 11:36:40 +0000 (19:36 +0800)]
af_unix: Add test for SCM_INQ on partial read
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Jianyu Li [Mon, 1 Jun 2026 11:36:39 +0000 (19:36 +0800)]
af_unix: Fix inq_len update problem in partial read
Currently inq_len is updated only when the whole skb is consumed.
If only part of the data is read, following SIOCINQ query would
get value greater than what actually left.
This change update inq_len timely in unix_stream_read_generic(),
and adjust unix_stream_read_skb() accordingly to prevent
repetitive update.
Fixes: f4e1fb04c123 ("af_unix: Use cached value for SOCK_STREAM in unix_inq_len().") Signed-off-by: Jianyu Li <jianyu.li@mediatek.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260601113640.231897-2-jianyu.li@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suman Ghosh [Fri, 29 May 2026 11:37:05 +0000 (17:07 +0530)]
octeontx2-af: Fix initialization of mcam's entry2target_pffunc field
NPC mcam entry stores a mapping between mcam entry and target pcifunc.
During initialization of this field, API kmalloc_array has been used which
caused some junk values to array. Whereas, the array is expected to be
initialized by 0. This patch fixes the same by using kcalloc instead of
kmalloc_array.
Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1780054625-17090-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geetha sowjanya [Fri, 29 May 2026 11:37:57 +0000 (17:07 +0530)]
octeontx2-pf: Fix NDC sync operation errors
On system reboot "rvu_nicpf 0002:03:00.0: NDC sync operation failed"
error messages are shown, even if the operations is successful.
This is due to wrong if error check in ndc_syc() function.
Fixes: 42c45ac1419c ("octeontx2-af: Sync NIX and NPA contexts from NDC to LLC/DRAM") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1780054677-17249-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yizhou Zhao [Fri, 29 May 2026 10:50:16 +0000 (18:50 +0800)]
appletalk: aarp: zero-initialize aarp_entry to prevent heap info leak
aarp_alloc() allocates struct aarp_entry without zeroing it, but only
initializes refcnt and packet_queue. When an unresolved AARP entry is
created, hwaddr[ETH_ALEN] is left uninitialized.
aarp_seq_show() later prints this field with %pM when users read
/proc/net/atalk/arp. This can expose 6 bytes of stale heap data for
each unresolved entry.
Fix this by zero-initializing struct aarp_entry at allocation time.
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260529105017.81531-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Jelonek [Thu, 28 May 2026 20:52:40 +0000 (20:52 +0000)]
net: sfp: initialize i2c_block_size at adapter configure time
sfp->i2c_block_size is only assigned in sfp_sm_mod_probe(), which runs
from the state machine timer after SFP_F_PRESENT has been set. Between
those two points, sfp_module_eeprom() (the ethtool -m callback) gates
only on SFP_F_PRESENT and can be entered with i2c_block_size still at
its kzalloc'd value of 0.
On a pure-I2C adapter, sfp_i2c_read() then issues an i2c_transfer()
with msgs[1].len = 0 inside a loop that subtracts this_len from len
each iteration; on adapters that succeed a zero-length read the loop
never advances, spinning while holding rtnl_lock.
This was previously addressed by initializing i2c_block_size in
sfp_alloc() (commit 813c2dd78618), but the initialization was dropped
when i2c_block_size was split from i2c_max_block_size.
Initialize sfp->i2c_block_size from sfp->i2c_max_block_size in
sfp_i2c_configure(), so the field is valid as soon as the adapter is
known. sfp_sm_mod_probe() still reassigns it on each module insertion
to recover from a per-module clamp to 1 (sfp_id_needs_byte_io).
Jason Xing [Sat, 30 May 2026 04:26:30 +0000 (12:26 +0800)]
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees.
Closes: https://lore.kernel.org/all/20260503200927.73EA1C2BCB4@smtp.kernel.org/ Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") Link: https://patch.msgid.link/20260530042630.80626-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 3 Jun 2026 16:09:24 +0000 (09:09 -0700)]
Merge tag 'mmc-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix host controller programming for eMMC fixed driver type
MMC host:
- dw_mmc-rockchip: Add missing private data for very old controllers
- litex_mmc: Fix clock management
- renesas_sdhi: Add OF entry for RZ/G2H SoC
- sdhci: Manage signal voltage switch during system resume for some hosts
- sdhci-of-dwcmshc: Fix reset, clk and SDIO support for Eswin EIC7700"
* tag 'mmc-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: add signal voltage switch in sdhci_resume_host
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
mmc: litex_mmc: Set mandatory idle clocks before CMD0
mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation
mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC
mmc: sdhci-of-dwcmshc: Fix reset, clk, and SDIO support for Eswin EIC7700
mmc: core: Fix host controller programming for fixed driver type
Linus Torvalds [Wed, 3 Jun 2026 15:59:24 +0000 (08:59 -0700)]
Merge tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"One cpuset fix and a maintenance update, both low-risk:
- Fix cpuset partition CPU accounting under sibling CPU exclusion
that could produce wrong CPU assignments and trigger
scheduling-domain warnings. Includes selftests.
- Update an email address in MAINTAINERS"
* tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Change Ridong's email
cgroup/cpuset: Add test cases for sibling CPU exclusion on partition update
cgroup/cpuset: Use effective_xcpus in partcmd_update add/del mask calculation
Linus Torvalds [Wed, 3 Jun 2026 15:52:26 +0000 (08:52 -0700)]
Merge tag 'sched_ext-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"Two low-risk fixes:
- Drop a spurious warning that can fire during cgroup migration while
a sched_ext scheduler is loaded
- Fix a drgn-based debug script that broke after scheduler state
moved into a per-scheduler struct"
* tag 'sched_ext-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
tools/sched_ext: Fix scx_show_state per-scheduler state reads
Bluetooth: MGMT: Fix backward compatibility with userspace
bluetoothd has a bug with makes it send extra bytes as part of
MGMT_OP_ADD_EXT_ADV_DATA which are now being checked to be the
exact the expected length, relax this so only when the expected
length is greater than the data length to cause an error since
that would result in accessing invalid memory, otherwise just
ignore the extra bytes.
SeungJu Cheon [Mon, 1 Jun 2026 11:19:08 +0000 (20:19 +0900)]
Bluetooth: SCO: Fix data-race on sco_pi fields in sco_connect
sco_sock_connect() copies the destination address into sco_pi(sk)->dst
under lock_sock(), then releases the lock and calls sco_connect(),
which reads dst, src, setting, and codec without holding lock_sock() in
hci_get_route() and hci_connect_sco().
These fields may be modified concurrently by connect(), bind(), or
setsockopt() on the same socket, resulting in data-races reported by
KCSAN.
Fix this by snapshotting dst, src, setting, and codec under lock_sock()
at the start of sco_connect() before passing them to hci_get_route()
and hci_connect_sco().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff88800e6b0dd0 of 1 bytes
by task 315 on cpu 0:
memcmp+0x45/0xb0
hci_connect_acl+0x1b7/0x6b0
hci_connect_sco+0x4d/0xb30
sco_sock_connect+0x27b/0xd60
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
projects / thirdparty / linux.git / log
