Despite what I think the prm recommends, commit f2253bd9859b
("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out
to be a huge mistake when enabling Ironlake contexts as the GPU would
hang on either a MI_FLUSH or PIPE_CONTROL immediately following the
MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g.
simple rendercopies with igt, do not suffer).
Ville found the following clue,
"[DevCTG+]: For the invalidate operation of the pipe control, the
following pointers are affected. The
invalidate operation affects the restore of these packets. If the pipe
control invalidate operation is completed
before the context save, the indirect pointers will not be restored from
memory.
1. Pipeline State Pointer
2. Media State Pointer
3. Constant Buffer Packet"
which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT,
we prevent the context-restore from chasing the dangling pointers within
the image, and explains why this likely prevents the GPU hang.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk
(cherry picked from commit 928f8f42310f244501a7c70daac82c196112c190 in drm-intel-next) Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111014 Fixes: f2253bd9859b ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When KASLR and KASAN are both enabled, we keep the modules where they
are, and randomize the placement of the kernel so it is within 2 GB
of the module region. The reason for this is that putting modules in
the vmalloc region (like we normally do when KASLR is enabled) is not
possible in this case, given that the entire vmalloc region is already
backed by KASAN zero shadow pages, and so allocating dedicated KASAN
shadow space as required by loaded modules is not possible.
The default module allocation window is set to [_etext - 128MB, _etext]
in kaslr.c, which is appropriate for KASLR kernels booted without a
seed or with 'nokaslr' on the command line. However, as it turns out,
it is not quite correct for the KASAN case, since it still intersects
the vmalloc region at the top, where attempts to allocate shadow pages
will collide with the KASAN zero shadow pages, causing a WARN() and all
kinds of other trouble. So cap the top end to MODULES_END explicitly
when running with KASAN.
Switch to the "marvell,armada-38x-uart" driver variant to empty
the UART buffer before writing to the UART_LCR register.
Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>. Cc: stable@vger.kernel.org Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.
This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.
swap_readpage() sets waiter = bio->bi_private even if synchronous = F,
this means that the caller can get the spurious wakeup after return.
This can be fatal if blk_wake_io_task() does
set_current_state(TASK_RUNNING) after the caller does
set_special_state(), in the worst case the kernel can crash in
do_task_dead().
When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.
This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.
But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.
Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.
Commit ae62c16e105a ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.
Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes mpi_powm will leak karactx because a memory allocation
failure causes a bail-out that skips the freeing of karactx. This
patch moves the freeing of karactx to the end of the function like
everything else so that it can't be skipped.
Reported-by: syzbot+f7baccc38dcc1e094e77@syzkaller.appspotmail.com Fixes: cdec9cb5167a ("crypto: GnuPG based MPI lib - source files...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When inserting entry into xarray, we store mapping and index in
corresponding struct pages for memory error handling. When it happened
that one process was mapping file at PMD granularity while another
process at PTE granularity, we could wrongly deassociate PMD range and
then reassociate PTE range leaving the rest of struct pages in PMD range
without mapping information which could later cause missed notifications
about memory errors. Fix the problem by calling the association /
deassociation code if and only if we are really going to update the
xarray (deassociating and associating zero or empty entries is just
no-op so there's no reason to complicate the code with trying to avoid
the calls for these cases).
Cc: <stable@vger.kernel.org> Fixes: d2c997c0f145 ("fs, dax: use page->mapping to warn if truncate...") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM
Clevo. The model names are written in regex syntax to describe/match all clevo
models that are similar enough and use the same PCI SSID that this fixup works
for them.
Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the
all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since
ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be
swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model
and fixes the audio.
There are a couple of left shifts of unsigned 8 bit values that
first get promoted to signed ints and hence get sign extended
on the shift if the top bit of the 8 bit values are set. Fix
this by casting the 8 bit values to unsigned ints to stop the
unintentional sign extension.
Addresses-Coverity: ("Unintended sign extension") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls. The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.
This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.
In IEC 61883-6, 8 MIDI data streams are multiplexed into single
MIDI conformant data channel. The index of stream is calculated by
modulo 8 of the value of data block counter.
In fireworks, the value of data block counter in CIP header has a quirk
with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA
IEC 61883-1/6 packet streaming engine to miss detection of MIDI
messages.
This commit fixes the miss detection to modify the value of data block
counter for the modulo calculation.
For maintainers, this bug exists since a commit 18f5ed365d3f ("ALSA:
fireworks/firewire-lib: add support for recent firmware quirk") in Linux
kernel v4.2. There're many changes since the commit. This fix can be
backported to Linux kernel v4.4 or later. I tagged a base commit to the
backport for your convenience.
Besides, my work for Linux kernel v5.3 brings heavy code refactoring and
some structure members are renamed in 'sound/firewire/amdtp-stream.h'.
The content of this patch brings conflict when merging -rc tree with
this patch and the latest tree. I request maintainers to solve the
conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'.
There are two occurrances of a call to snd_seq_oss_fill_addr where
the dest_client and dest_port arguments are in the wrong order. Fix
this by swapping them around.
Addresses-Coverity: ("Arguments in wrong order") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cryptd_skcipher_free() fails to free the struct skcipher_instance
allocated in cryptd_create_skcipher(), leading to a memory leak. This
is detected by kmemleak on bootup on ARM64 platforms:
Michal Suchanek reported [1] that running the pcrypt_aead01 test from
LTP [2] in a loop and holding Ctrl-C causes a NULL dereference of
alg->cra_users.next in crypto_remove_spawns(), via crypto_del_alg().
The test repeatedly uses CRYPTO_MSG_NEWALG and CRYPTO_MSG_DELALG.
The crash occurs when the instance that CRYPTO_MSG_DELALG is trying to
unregister isn't a real registered algorithm, but rather is a "test
larval", which is a special "algorithm" added to the algorithms list
while the real algorithm is still being tested. Larvals don't have
initialized cra_users, so that causes the crash. Normally pcrypt_aead01
doesn't trigger this because CRYPTO_MSG_NEWALG waits for the algorithm
to be tested; however, CRYPTO_MSG_NEWALG returns early when interrupted.
Everything else in the "crypto user configuration" API has this same bug
too, i.e. it inappropriately allows operating on larval algorithms
(though it doesn't look like the other cases can cause a crash).
Fix this by making crypto_alg_match() exclude larval algorithms.
When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred(). However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.
PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case. If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.
Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.
This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.
A similar race exists when toggling ftrace while loading a livepatch
module.
Fix it by ensuring that the livepatch and ftrace code patching
operations -- and their respective permissions changes -- are protected
by the text_mutex.
Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com Reported-by: Johannes Erdfelt <johannes@erdfelt.com> Fixes: 444d13ff10fb ("modules: add ro_after_init support") Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:
kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]
On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong. So change the local variable and return value to
unsigned long to fix the problem.
Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com Fixes: 0cf2f6f6dc60 ("mm: mlock: check against vma for actual mlock() size") Signed-off-by: swkhack <swkhack@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':
In the case that a process is constrained by taskset(1) (i.e.
sched_setaffinity(2)) to a subset of available cpus, and all of those are
subsequently offlined, the scheduler will set tsk->cpus_allowed to
the current value of task_cs(tsk)->effective_cpus.
This is done via a call to do_set_cpus_allowed() in the context of
cpuset_cpus_allowed_fallback() made by the scheduler when this case is
detected. This is the only call made to cpuset_cpus_allowed_fallback()
in the latest mainline kernel.
However, this is not sane behavior.
I will demonstrate this on a system running the latest upstream kernel
with the following initial configuration:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,fffffff
Cpus_allowed_list: 0-63
(Where cpus 32-63 are provided via smt.)
If we limit our current shell process to cpu2 only and then offline it
and reonline it:
# taskset -p 4 $$
pid 2272's current affinity mask: ffffffffffffffff
pid 2272's new affinity mask: 4
# echo off > /sys/devices/system/cpu/cpu2/online
# dmesg | tail -3
[ 2195.866089] process 2272 (bash) no longer affine to cpu2
[ 2195.872700] IRQ 114: no longer affine to CPU2
[ 2195.879128] smpboot: CPU 2 is now offline
We see that our current process now has an affinity mask containing
every cpu available on the system _except_ the one we originally
constrained it to:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,fffffffb
Cpus_allowed_list: 0-1,3-63
This is not sane behavior, as the scheduler can now not only place the
process on previously forbidden cpus, it can't even schedule it on
the cpu it was originally constrained to!
Other cases result in even more exotic affinity masks. Take for instance
a process with an affinity mask containing only cpus provided by smt at
the moment that smt is toggled, in a configuration such as the following:
A double toggle of smt results in the following behavior:
# echo off > /sys/devices/system/cpu/smt/control
# echo on > /sys/devices/system/cpu/smt/control
# grep -i cpus /proc/$$/status
Cpus_allowed: ffffff00,ffffffff
Cpus_allowed_list: 0-31,40-63
This is even less sane than the previous case, as the new affinity mask
excludes all smt-provided cpus with ids less than those that were
previously in the affinity mask, as well as those that were actually in
the mask.
With this patch applied, both of these cases end in the following state:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,ffffffff
Cpus_allowed_list: 0-63
The original policy is discarded. Though not ideal, it is the simplest way
to restore sanity to this fallback case without reinventing the cpuset
wheel that rolls down the kernel just fine in cgroup v2. A user who wishes
for the previous affinity mask to be restored in this fallback case can use
that mechanism instead.
This patch modifies scheduler behavior by instead resetting the mask to
task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy
mode. I tested the cases above on both modes.
Note that the scheduler uses this fallback mechanism if and only if
_every_ other valid avenue has been traveled, and it is the last resort
before calling BUG().
Suggested-by: Waiman Long <longman@redhat.com> Suggested-by: Phil Auld <pauld@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Acked-by: Phil Auld <pauld@redhat.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 3d65b6bbc01e ("arm64: tlbi: Set MAX_TLBI_OPS to
PTRS_PER_PTE"), we resort to per-ASID invalidation when attempting to
perform more than PTRS_PER_PTE invalidation instructions in a single
call to __flush_tlb_range(). Whilst this is beneficial, the mmu_gather
code does not ensure that the end address of the range is rounded-up
to the stride when freeing intermediate page tables in pXX_free_tlb(),
which defeats our range checking.
The devm_gpiod_request_gpiod() call will add "-gpios" to
any passed connection ID before looking it up.
I do not think the reset GPIO on this platform is named
"reset-gpios-gpios" but rather "reset-gpios" in the device
tree, so fix this up so that we get a proper reset GPIO
handle.
Also drop the inclusion of the legacy GPIO header.
Add devm_free_irq() call to mlxreg-hotplug remove() for clean release
of devices irq resource. Fix debugobjects warning triggered by rmmod
It prevents of use-after-free memory, related to
mlxreg_hotplug_work_handler.
Issue has been reported as debugobjects warning triggered by
'rmmod mlxtreg-hotplug' flow, while running kernel with
CONFIG_DEBUG_OBJECTS* options.
Fix the issue found while running kernel with the option
CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers
few underlying 'i2c-mux-reg' devices:
priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
NULL, 0);
...
for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
priv->pdev_mux[i] = platform_device_register_resndata(
&mlxplat_dev->dev,
"i2c-mux-reg", i, NULL,
0, &mlxplat_mux_data[i],
sizeof(mlxplat_mux_data[i]));
But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and
not mlxplat_dev->dev.
Patch fixes parent device parameter in a call to
platform_device_register_resndata() for "i2c-mux-reg".
It solves the race during initialization flow while 'i2c_mlxcpld.1' is
removing after probe, while 'i2c-mux-reg.0' is still in probing flow:
'i2c_mlxcpld.1' flow: probe -> remove -> probe.
'i2c-mux-reg.0' flow: probe -> ...
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the client_mutex lock to snd_soc_unbind_card() before
removing link components. This prevents the deadlock
in the error path in snd_soc_instantiate_card().
Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing
link components) Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.
Changes in v2:
-Add one more known BIOS date to the list of BIOS dates
24 bit expanders use REG_ADDR_AI in combination with register addressing. This
conflicts with regmap which takes this bit as part of the register number,
i.e. a second cache entry is defined for accessed with REG_ADDR_AI being
set although on the chip it is the same register as with REG_ADDR_AI being
cleared.
The problem was introduced by
commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function")
but only became visible by
commit 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")
because before, the regmap size was effectively ignored and
pca953x_writeable_register() did know to ignore REG_ADDR_AI. Still, there
were two separate cache entries created.
Since the use of REG_ADDR_AI seems to be static we can work around this
issue by simply increasing the size of the regmap to cover the "virtual"
registers with REG_ADDR_AI being set. This only means that half of the
regmap buffer will be unused.
- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
the last s/g element.
- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
chaining.
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Matt Perricone <matt.perricone@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we call snd_soc_component_set_jack(component, NULL, NULL) we should
set rt274->jack to passed jack, so when interrupt is triggered it calls
snd_soc_jack_report(rt274->jack, ...) with proper value.
This fixes problem in machine where in register, we call
snd_soc_register(component, &headset, NULL), which just calls
rt274_mic_detect via callback.
Now when machine driver is removed "headset" will be gone, so we
need to tell codec driver that it's gone with:
snd_soc_register(component, NULL, NULL), but we also need to be able
to handle NULL jack argument here gracefully.
If we don't set it to NULL, next time the rt274_irq runs it will call
snd_soc_jack_report with first argument being invalid pointer and there
will be Oops.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During the integration of HDaudio support, we changed the way in which
we get hdev in snd_hdac_ext_bus_device_init() to use one preallocated
with devm_kzalloc(), however it still left kfree(hdev) in
snd_hdac_ext_bus_device_exit(). It leads to oopses when trying to
rmmod and modprobe. Fix it, by just removing kfree call.
SOF also uses some of the snd_hdac_ functions for HDAudio support but
allocated the memory with kzalloc. A matching fix is provided
separately to align all users of the snd_hdac_ library.
Fixes: 6298542fa33b ("ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_init") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dai_link->platforms has been reset to NULL by soc_cleanup_platform()
in soc_cleanup_card_resources() when un-registering component. However,
it has no chance to re-allocate the dai_link->platforms when registering
the component again.
Move the DAI pre-links initiation from snd_soc_register_card() to
snd_soc_instantiate_card() to make sure all DAI pre-links get initiated
when component rebinding.
As an example, by using the following commands:
- echo -n max98357a > /sys/bus/platform/drivers/max98357a/unbind
- echo -n max98357a > /sys/bus/platform/drivers/max98357a/bind
Got the error message:
"Unable to handle kernel NULL pointer dereference at virtual address".
The call trace:
snd_soc_is_matching_component+0x30/0x6c
soc_bind_dai_link+0x16c/0x240
snd_soc_bind_card+0x1e4/0xb10
snd_soc_add_component+0x270/0x300
snd_soc_register_component+0x54/0x6c
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: f403906da05cd ("ASoC: Intel: cht_bsw_rt5672: platform name fixup support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: 4506db8043341 ("ASoC: Intel: cht_bsw_nau8824: platform name fixup support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: e4bc6b1195f64 ("ASoC: Intel: bytcht_es8316: platform name fixup support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The platform override code uses devm_ functions to allocate memory for
the new name but the card device is not initialized. Fix by moving the
init earlier.
Fixes: 7e7e24d7c7ff0 ("ASoC: Intel: cht_bsw_max98090_ti: platform name fixup support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
avoided a NULL pointer dereference (hs_ep->req == NULL) by
calling dwc2_gadget_fill_nonisoc_xfer_dma_one() directly instead of through
the dwc2_gadget_config_nonisoc_xfer_ddma() wrapper, which unconditionally
dereferenced the said pointer.
However, this was based on an incorrect assumption that in the context of
dwc2_hsotg_program_zlp() the pointer is always NULL, which is not the case.
The result were SB CV MSC tests failing starting from Test Case 6.
Instead, this patch reverts to calling the wrapper and adds a check for
the pointer being NULL inside the wrapper.
Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.
Also remove the unnecessary cast.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Tested-by: James Grant <jamesg@zaltys.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Whilst testing the capture functionality of the i2s on the newer
SoCs it was noticed that the recording was somewhat distorted.
This was due to the offset not being set correctly on the receiver
side.
Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although not causing any noticeable issues, the mask for the
channel offset is covering too many bits.
Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.
In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:
1. mtk_dsi_encoder_disable()
--> mtk_output_dsi_disable()
--> mtk_dsi_stop(); /* sometimes make vblank timeout in
atomic_disable */
--> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
--> drm_crtc_wait_one_vblank();
...
--> mtk_dsi_ddp_stop()
--> mtk_dsi_poweroff();
mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.
Fixes: 0707632b5bac ("drm/mediatek: update DSI sub driver flow for sending commands to panel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
num_pipes is used for mutex created in mtk_drm_crtc_create(). If we
don't clear num_pipes count, when rebinding driver, the count will
be accumulated. From mtk_disp_mutex_get(), there can only be at most
10 mutex id. Clear this number so it starts from 0 in every rebind.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unbinding components (i.e. mtk_dsi and mtk_disp_ovl/rdma/color) will
trigger master(mtk_drm)'s .unbind(), and currently mtk_drm's unbind
won't actually unbind components. During the next bind,
mtk_drm_kms_init() is called, and the components are added back.
.unbind() should call mtk_drm_kms_deinit() to unbind components.
And since component_master_del() in .remove() will trigger .unbind(),
which will also unregister device, it's fine to remove original functions
called here.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.
Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
HDA_DEV_ASOC type codec device refcounts are managed differently
from HDA_DEV_LEGACY devices. The refcount is released explicitly
in snd_hdac_ext_bus_device_remove() for ASOC type devices.
So, remove the put_device() call in snd_hda_codec_dev_free()
for such devices to make the refcount balanced. This will prevent
the NULL pointer exception when the codec driver is released
after the card is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This tablet has an incorrect acpi identifier just like
Thinkpad10 tablet, which is why it is trying to load the RT5640 driver
instead of the RT5762 driver. The RT5640 driver, on the other hand, checks
the hardware ID, so no driver are loaded during boot. This fix resolves to
load the RT5672 driver on this tablet during boot. It also provides the
correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I
would like to thank Pierre-Louis Bossart for helping with this patch.
Signed-off-by: Kovács Tamás <kepszlok@zohomail.eu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Removing link components results in topology unloading. So,
acquire the client_mutex before removing components in
soc_remove_link_components. This will prevent the lockdep warning
seen when dai links are removed during topology removal.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If spi_register_master fails in spi_bitbang_start
because device_add failure, We should return the
error code other than 0, otherwise calling
spi_bitbang_stop may trigger NULL pointer dereference
like this:
BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
snd_soc_component_update_bits() may return 1 if operation
was successful and the value of the register changed.
Return a non-zero in ak4458_rstn_control for an error only.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If playback/capture is paused and system enters S3, after system returns
from suspend, BE dai needs to call prepare() callback when playback/capture
is released from pause if RESUME_INFO flag is not set.
Currently, the dpcm_be_dai_prepare() function will block calling prepare()
if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the
following test case fail if the pcm uses BE:
AK4458 is probed successfully even if AK4458 is not present - this
is caused by probe function returning no error on i2c access failure.
Return an error on probe if i2c access has failed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cs4265_readable_register function stopped short of the maximum
register.
An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25
Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error
This patch fixes the bug by setting the cs4265 to have readable
registers up to the maximum hardware register CS4265_MAX_REGISTER.
Signed-off-by: Matt Flax <flatmax@flatmax.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the entry is deleted from the IDR between the call to
radix_tree_iter_find() and rcu_dereference_raw(), idr_get_next()
will return NULL, which will end the iteration prematurely. We should
instead continue to the next entry in the IDR. This only happens if the
iteration is protected by the RCU lock. Most IDR users use a spinlock
or semaphore to exclude simultaneous modifications. It was noticed once
the PID allocator was converted to use the IDR, as it uses the RCU lock,
but there may be other users elsewhere in the kernel.
We can't use the normal pattern of calling radix_tree_deref_retry()
(which catches both a retry entry in a leaf node and a node entry in
the root) as the IDR supports storing entries which are unaligned,
which will trigger an infinite loop if they are encountered. Instead,
we have to explicitly check whether the entry is a retry entry.
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree") Reported-by: Brendan Gregg <bgregg@netflix.com> Tested-by: Brendan Gregg <bgregg@netflix.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't deal with tcp sequence number rewrite in flow_offload.
While at it, simplify helper check, we only need to know if the extension
is present, we don't need the helper data.
Without it, whenever a packet has to be pushed up the stack (e.g. because
of mtu mismatch), then conntrack will flag packets as invalid, which in
turn breaks NAT.
This is the minimal fix for stable, I'll send cleanups later.
Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.
Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.
Eric said:
: For clarity. I don't think this is required by posix, or fundamentally to
: remove the races in select. It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented. The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?
Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Eric Wong <e@80x24.org> Tested-by: Eric Wong <e@80x24.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC 8.1.0 reports that the ldadd instruction encoding, recently added to
insn.c, doesn't match the mask and couldn't possibly be identified:
linux/arch/arm64/include/asm/insn.h: In function 'aarch64_insn_is_ldadd':
linux/arch/arm64/include/asm/insn.h:280:257: warning: bitwise comparison always evaluates to false [-Wtautological-compare]
Bits [31:30] normally encode the size of the instruction (1 to 8 bytes)
and the current instruction value only encodes the 4- and 8-byte
variants. At the moment only the BPF JIT needs this instruction, and
doesn't require the 1- and 2-byte variants, but to be consistent with
our other ldr and str instruction encodings, clear the size field in the
insn value.
Fixes: 34b8ab091f9ef57a ("bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.
Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.
syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:
kasan: GPF could be caused by NULL-ptr deref or user memory access
RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
<IRQ>
rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2437 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
...
The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.
Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When implementing connector fsid cache, we only initialized the cache
when the first mark added to object was added by FAN_REPORT_FID group.
We forgot to update conn->fsid when the second mark is added by
FAN_REPORT_FID group to an already attached connector without fsid
cache.
Reported-and-tested-by: syzbot+c277e8e2f46414645508@syzkaller.appspotmail.com Fixes: 77115225acc6 ("fanotify: cache fsid in fsnotify_mark_connector") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc 9 now does allocation size tracking and thinks that passing the member
of a union and then accessing beyond that member's bounds is an overflow.
Instead of using the union member, use the entire union with a cast to
get to the sockaddr. gcc will now know that the memory extends the full
size of the union.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The architecture implementations of 'arch_futex_atomic_op_inuser()' and
'futex_atomic_cmpxchg_inatomic()' are permitted to return only -EFAULT,
-EAGAIN or -ENOSYS in the case of failure.
Update the comments in the asm-generic/ implementation and also a stray
reference in the robust futex documentation.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ARMv8.1 supplement introduced LSE atomic instructions back in 2016,
lets add support for STADD and use that in favor of LDXR / STXR loop for
the XADD mapping if available. STADD is encoded as an alias for LDADD with
XZR as the destination register, therefore add LDADD to the instruction
encoder along with STADD as special case and use it in the JIT for CPUs
that advertise LSE atomics in CPUID register. If immediate offset in the
BPF XADD insn is 0, then use dst register directly instead of temporary
one.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Returning an error code from futex_atomic_cmpxchg_inatomic() indicates
that the caller should not make any use of *uval, and should instead act
upon on the value of the error code. Although this is implemented
correctly in our futex code, we needlessly copy uninitialised stack to
*uval in the error case, which can easily be avoided.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__udp6_lib_err() may be called when handling icmpv6 message. For example,
the icmpv6 toobig(type=2). __udp6_lib_lookup() is then called
which may call reuseport_select_sock(). reuseport_select_sock() will
call into a bpf_prog (if there is one).
reuseport_select_sock() is expecting the skb->data pointing to the
transport header (udphdr in this case). For example, run_bpf_filter()
is pulling the transport header.
However, in the __udp6_lib_err() path, the skb->data is pointing to the
ipv6hdr instead of the udphdr.
One option is to pull and push the ipv6hdr in __udp6_lib_err().
Instead of doing this, this patch follows how the original
commit 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
was done in IPv4, which has passed a NULL skb pointer to
reuseport_select_sock().
Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Cc: Craig Gallek <kraig@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the commit a6024562ffd7 ("udp: Add GRO functions to UDP socket")
added udp[46]_lib_lookup_skb to the udp_gro code path, it broke
the reuseport_select_sock() assumption that skb->data is pointing
to the transport header.
This patch follows an earlier __udp6_lib_err() fix by
passing a NULL skb to avoid calling the reuseport's bpf_prog.
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e3779 ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.
Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:
For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:
# nslookup 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
;; connection timed out; no servers could be reached
# dig 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
;; global options: +cmd
;; connection timed out; no servers could be reached
For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:
# nslookup 1.1.1.1 8.8.8.8
1.1.1.1.in-addr.arpa name = one.one.one.one.
In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.
Same example after this fix:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
Lookups work fine now:
# nslookup 1.1.1.1
1.1.1.1.in-addr.arpa name = one.one.one.one.
And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:
# tcpdump -i any udp
[...]
12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
[...]
In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.
The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.
For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.
This enables three levels of nesting, to support
- a kprobe or raw tp or perf event,
- another one of the above that irq context happens to call, and
- another one in nmi context
(at most one of which may be a kprobe or perf event).
Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data") Signed-off-by: Matt Mullins <mmullins@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the leftmost parent node of the tree has does not have a child
on the left side, then trie_get_next_key (and bpftool map dump) will
not look at the child on the right. This leads to the traversal
missing elements.
Lookup is not affected.
Update selftest to handle this case.
Reproducer:
bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \
value 1 entries 256 name test_lpm flags 1
bpftool map update pinned /sys/fs/bpf/lpm key 8 0 0 0 0 0 value 1
bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0 0 128 value 2
bpftool map dump pinned /sys/fs/bpf/lpm
Returns only 1 element. (2 expected)
Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, the BPF_FIB_LOOKUP_{DIRECT,OUTPUT} flags in the BPF UAPI
were defined with the help of BIT macro. This had the following issues:
- In order to use any of the flags, a user was required to depend
on <linux/bits.h>.
- No other flag in bpf.h uses the macro, so it seems that an unwritten
convention is to use (1 << (nr)) to define BPF-related flags.
Fixes: 87f5fc7e48dd ("bpf: Provide helper to do forwarding lookups in kernel FIB table") Signed-off-by: Martynas Pumputis <m@lambda.lt> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.
The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.
The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.
Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently after setting tap0 link up, the tun code wakes tx/rx waited
queues up in tun_net_open() when .ndo_open() is called, however the
IFF_UP flag has not been set yet. If there's already a wait queue, it
would fail to transmit when checking the IFF_UP flag in tun_sendmsg().
Then the saving vhost_poll_start() will add the wq into wqh until it
is waken up again. Although this works when IFF_UP flag has been set
when tun_chr_poll detects; this is not true if IFF_UP flag has not
been set at that time. Sadly the latter case is a fatal error, as
the wq will never be waken up in future unless later manually
setting link up on purpose.
Fix this by moving the wakeup process into the NETDEV_UP event
notifying process, this makes sure IFF_UP has been set before all
waited queues been waken up.
Signed-off-by: Fei Li <lifei.shirley@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.
Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
v1->v2:
- add the missing Fixes tags per Eric's request.
Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is to fix a dst defcnt leak, which can be reproduced by doing:
# ip net a c; ip net a s; modprobe tipc
# ip net e s ip l a n eth1 type veth peer n eth1 netns c
# ip net e c ip l s lo up; ip net e c ip l s eth1 up
# ip net e s ip l s lo up; ip net e s ip l s eth1 up
# ip net e c ip a a 1.1.1.2/8 dev eth1
# ip net e s ip a a 1.1.1.1/8 dev eth1
# ip net e c tipc b e m udp n u1 localip 1.1.1.2
# ip net e s tipc b e m udp n u1 localip 1.1.1.1
# ip net d c; ip net d s; rmmod tipc
and it will get stuck and keep logging the error:
unregister_netdevice: waiting for lo to become free. Usage count = 1
The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx
path with udp_early_demux == 1, and this dst (eventually holding lo dev)
can't be released as bearer's removal in tipc pernet .exit happens after
lo dev's removal, default_device pernet .exit.
"There are two distinct types of pernet_operations recognized: subsys and
device. At creation all subsys init functions are called before device
init functions, and at destruction all device exit functions are called
before subsys exit function."
So by calling register_pernet_device instead to register tipc_net_ops, the
pernet .exit() will be invoked earlier than loopback dev's removal when a
netns is being destroyed, as fou/gue does.
Note that vxlan and geneve udp tunnels don't have this issue, as the udp
sock is released in their device ndo_stop().
This fix is also necessary for tipc dst_cache, which will hold dsts on tx
path and I will introduce in my next patch.
Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,
Here to fix it by only holding the sk when auth shkey is created
successfully.
Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records")
a new path was introduced to cleanup partial records during sk_proto_close.
This path does not handle the SW KTLS tx_list cleanup.
This is unnecessary though since the free_resources calls for both
SW and offload paths will cleanup a partial record.
The visible effect is the following warning, but this bug also causes
a page double free.
Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.
This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.
Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In sock_getsockopt(), 'optlen' is fetched the first time from userspace.
'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is
fetched the second time from userspace.
If change it between two fetches may cause security problems or unexpected
behaivor, and there is no reason to fetch it a second time.
To fix this, we need to remove the second fetch.
Signed-off-by: JingYi Hou <houjingyi647@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot found we can leak memory in packet_set_ring(), if user application
provides buggy parameters.
Fixes: 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 19e4e768064a8 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.
Fixes: 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.
Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.
This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
