Peter Krempa [Wed, 30 Sep 2020 13:30:20 +0000 (15:30 +0200)]
qemuMigrationCookieNetworkXMLFormat: Refactor XML formatting
Use 'virXMLFormatElement' both for formating the whole <network> element
but also for formatting the <interface> subelements. This alows to
remove the crazy logic which was determining which element was already
formatted.
Additional simplification is achieved by switching to skipping the loop
using 'continue' rather than putting everything in a giant block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 30 Sep 2020 13:00:43 +0000 (15:00 +0200)]
qemuMigrationCookieXMLParse: Check domain element count more defensively
Make sure that 'virXPathNodeSet' returns '1' as the only expected value
rather than relying on the fact that the previous check for the number
of elements ensures success of the subsequent call.
The error message no longer mentions the number of <domain> elements in
the cookie, but this is a very unlikely internal error anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Fri, 2 Oct 2020 08:26:34 +0000 (10:26 +0200)]
Use 'virBitmapNewCopy' instead of 'virBitmapCopy'
There are only 3 places using the function. Two can use virBitmapNewCopy
directly. In case of the qemu capabilities code we need to free the old
bitmap first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 2 Oct 2020 08:22:18 +0000 (10:22 +0200)]
virBitmapNewCopy: Reimplement bitmap copying to prevent failure
virBitmapCopy has a failure condition, which is impossible to meet when
creating a new copy. Copy the contents directly to make it obvious that
virBitmapNewCopy can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 5 Oct 2020 10:06:14 +0000 (12:06 +0200)]
virbitmaptest: Turn 'TEST_MAP' macro into a helper function
The function will also be reusable in other places of the code by making
the size check optional. For now only test12* is refactored since it
used TEST_MAP directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 5 Oct 2020 09:17:38 +0000 (11:17 +0200)]
virbitmaptest: Split up test4
'test4' was testing three distinct operations on separate instances of a
bitmap. Split it up into 'test4a', 'test4b' and 'test4c' so that the
'bitmap' variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 5 Oct 2020 09:17:38 +0000 (11:17 +0200)]
virbitmaptest: Split up test12
'test12' was testing two distinct operations on two instances of a
bitmap. Split it up into 'test12a' and 'test12b' so that the 'bitmap'
variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
The former is a short hand for the latter and is already widely used in
the docs. Using the short hand avoids incompatibility with the alternate
impl of rst2html5.
Reviewed-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Thu, 1 Oct 2020 14:56:48 +0000 (16:56 +0200)]
util: bitmap: Remove virBitmapNewQuiet
We no longer report any errors so all callers can be replaced by
virBitmapNew. Additionally virBitmapNew can't return NULL now so error
handling is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 1 Oct 2020 12:13:37 +0000 (14:13 +0200)]
virBitmapToString: Properly handle empty bitmaps
virBitmapNewEmpty() can create a bitmap with 0 length. With such a
bitmap virBitmapToString will return NULL rather than an empty string.
Initialize the buffer to avoid that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
vircommand.c: write child pidfile before process tuning in virExec()
When VIR_EXEC_DAEMON is true and cmd->pidfile exists, the parent
will expect the pidfile to be written before exiting, sitting
tight in a saferead() call waiting.
The child then does process tuning (via virProcessSet* functions)
before writing the pidfile. Problem is that these tunings can
fail, and trigger a 'fork_error' jump, before cmd->pidfile is
written. The result is that the process was aborted in the
child, but the parent is still hang in the saferead() call.
This behavior can be reproduced by trying to create and execute
a QEMU guest in user mode (e.g. using qemu:///session as non-root).
virProcessSetMaxMemLock() will fail if the spawned libvirtd user
process does not have CAP_SYS_RESOURCE capability. setrlimit() will
fail, and a 'fork_error' jump is triggered before cmd->pidfile
is written. The parent will hung in saferead() indefinitely. From
the user perspective, 'virsh start <guest>' will hang up
indefinitely. CTRL+C can be used to retrieve the terminal, but
any subsequent 'virsh' call will also hang because the previous
libvirtd user process is still there.
We can fix this by moving all virProcessSet*() tuning functions
to be executed after cmd->pidfile is taken care of. In the case
mentioned above, this would be the result of 'virsh start'
after this patch:
error: Failed to start domain vm1
error: internal error: Process exited prior to exec: libvirt: error :
cannot limit locked memory to 79691776: Operation not permitted
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
virfirewalltest: Don't duplicate string when adding it onto stringlist
In our wrapper of g_dbus_connection_call_sync() in
virfirewalltest a string is duplicated and added onto a
virStringList. This leads to a memory leak because
virStringListAdd() duplicates the string itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With us switching to glib more and more it is easy to get things
wrong (as can be seen in the previous commit). Set G_DEBUG
variable to "fatal-warnings" which causes GLib to abort the
program at the first call to g_warning() or g_critical().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Pavel Hrdina [Fri, 2 Oct 2020 10:11:45 +0000 (12:11 +0200)]
tests: fix incorrect free of GVariant in our GLib mock functions
GLib implementation of g_dbus_connection_call_sync() calls
g_variant_ref_sink() on the passed @parameters to make sure they have
proper reference. If the original reference is floating the
g_dbus_connection_call_sync() consumes it, but if it's normal reference
it will just add another one.
Our mock functions were only freeing the @parameters which is incorrect
and doesn't reflect how the real implementation works.
Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If writing side writes enough bytes to the pipe and closes writing
end then we got both VIR_EVENT_HANDLE_HANGUP and VIR_EVENT_HANDLE_READ
in handler. Currently in this situation handler reads 1024 bytes
and finish reading leaving unread data in pipe.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Wed, 30 Sep 2020 22:51:45 +0000 (18:51 -0400)]
build: remove duplicate check for GET_VLAN_VID_CMD
Somehow this check was duplicated just below the original.
(I was at first skeptical that it's needed at all, since
GET_VLAN_VID_CMD was already present in kernel 2.6.32, but then I
realized that there is no higher level check for __linux__ around the
code that is conditional on WITH_DECL_GET_VLAN_VID_CMD; it only checks
for SIOCGIFVLAN and WITH_STRUCT_IFREQ - the latter is also present on
*BSD platforms, the former doesn't seem to be anywhere but Linux, but
I didn't want to change the effect of the conditional, so I left it in
(we could have also replaced WITH_DECL_GET_VLAN_VID_CMD, but possibly
there is a non-Linux platform that *does* have it...)
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Wed, 30 Sep 2020 21:56:00 +0000 (17:56 -0400)]
util: provide non-netlink/libnl alternative for virNetDevGetMaster()
Lack of this one function (which is called for each active tap device
every time libvirtd is started) is the one thing preventing a
"WITHOUT_LIBNL" build of libvirt from being useful. With this
alternate implementation, guests using standard tap devices will work
properly even when libvirt is built without libnl support.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Wed, 30 Sep 2020 20:36:52 +0000 (16:36 -0400)]
util: fix Linux build when libnl-devel isn't available
There was one stray bit of code in virnetdev.c that required libnl to
build, but wasn't qualified by defined(WITH_LIBNL). Adding that, plus
putting a similar check around a static function only used by that
aforementioned code, makes libvirt build properly without libnl3-devel
installed.
How useful it is in that state is a separate issue :-)
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 29 Sep 2020 14:54:38 +0000 (10:54 -0400)]
build: eliminate WITH_MACVTAP flag entirely
This flag was originally created to indicate that either 1) the build
platform wasn't linux, 2) the build platform was linux, but the kernel
was too old to have macvtap support. Since there was already a switch
there, the ability to also disable it when 3) the kernel supports
macvtap but the user doesn't want it, was added in. I don't think that
(3) was ever an intentional goal, just something that grew naturally
out of having the flag there in the first place (unless possibly the
original author wanted a way to quickly disable their new code in case
it caused regressions elsewhere).
Now that the check for (2) has been removed, WITH_MACVTAP is just
checking (1) and (3), but (3) is pointless (because the extra code in
libvirt itself is miniscule, and the only external library needed for
it is libnl, which is also required for other unrelated features (and
itself has no subordinate dependencies and takes up < 1MB on
disk)). We can therfore eliminate the WITH_MACVTAP flag, as it is
functionally equivalent to WITH_LIBNL (which implies __linux__).
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 29 Sep 2020 13:56:18 +0000 (09:56 -0400)]
build: simplify check for WITH_MACVTAP
macvtap support was added to the Linux kernel in 2.6.33. libvirt
checked for this by looking for MACVLAN_MODE_BRIDGE and IFLA_VF_MAX in
linux/if_link.h. This hasn't been necessary for a very long time, so
just gate on platform == 'linux' (and be sure to complain if someone
tries to enable it on a non-Linux platform).
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 29 Sep 2020 13:43:54 +0000 (09:43 -0400)]
build: remove check for MACVLAN_MODE_PASSTHRU
macvlan support was added to the Linux kernel in 2.6.33, but
MACVLAN_MODE_PASSTHRU wasn't added until 2.6.38, so a workaround had
been put in place to define that constant on those few systems where
it was missing. It's useful like was probably 6 months at most, but
it's been there for over 10 years.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 28 Sep 2020 21:39:46 +0000 (17:39 -0400)]
build: eliminate useless WITH_VIRTUALPORT check
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 28 Sep 2020 21:29:41 +0000 (17:29 -0400)]
util: remove extraneous defined(__linux__) when checking for WITH_LIBNL
WITH_LIBNL will only be defined on Linux platforms (because libnl is a
library written to encapsulate parts of netlink, which is a Linux-only
API), so it's redundant to write:
#if defined(__linux__) && defined(WITH_LIBNL)
We can just check for WITH_LIBNL.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 28 Sep 2020 19:53:48 +0000 (15:53 -0400)]
util: remove useless checks for IFLA_VF_MAX
IFLA_VF_MAX was introduced to the Linux kernel in 2.6.35, and was even
backported to the RHEL*6* 2.6.32 kernel downstream, so it is present
in all supported versions of all Linux distros that libvirt builds
on. Additionally, it can't be conditionally compiled out of a
kernel. There is no reason to conditionalize any piece of code on
presence of IFLA_VF_MAX - if the platform is Linux, it is supported.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Sat, 26 Sep 2020 16:59:11 +0000 (12:59 -0400)]
conf: use g_free() instead of VIR_FREE in virDomainNetDefFree()
All these lines were moved over from the now-defunct
virDomainNetDefClear(), which required all pointers to be cleared
after free, but virDomainNetDefFree() doesn't have that restriction -
after free'ing the pointers are never again referenced, so g_free() is
safe.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Wed, 23 Sep 2020 01:19:38 +0000 (21:19 -0400)]
qemu: eliminate use of virDomainNetDefClear() in qemuConnectDomainXMLToNative()
Instead of saving the interesting pieces of each existing NetDef,
clearing it, and then copying back the saved pieces after setting the
type to ethernet, just create a new NetDef, copy in the interesting
bits, and replace the old one. (The end game is to eliminate
virDomainNetDefClear() completely, since this is the only real use)
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
these are old enough that they can be assumed present in all Linux
platforms we support. The tap device creation code changed is specific
to Linux, with a separate impl for non-Linux platforms.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
projects / thirdparty / libvirt.git / log
