Daniel Golle [Sat, 12 May 2018 19:08:18 +0000 (21:08 +0200)]
hostapd: fix mesh+AP
Fix encrypted (or DFS) AP+MESH interface combination in a way similar
to how it's done for AP+STA and fix netifd shell script.
Refresh patches while at it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Jo-Philipp Wich [Mon, 14 May 2018 05:16:13 +0000 (07:16 +0200)]
rpcd: update to lastest HEAD
8206219 uci: fix memory leak in rpc_uci_replace_savedir() 10f7878 exec: close stdout and stderr streams on child signal 92d0d75 uci: use correct sort index when reordering sections
6b4a340 version: bump snapshot faa2103 compat: don't clear header bits on RHEL 4014532 compat: handle RHEL 7.5's recent backports 66589bc queueing: preserve pfmemalloc header bit 37f114a chacha20poly1305: make gcc 8.1 happy 926caae socket: use skb_put_data 724d979 wg-quick: preliminary support for go implementation c454c26 allowedips: simplify arithmetic 71d44be allowedips: produce better assembly with unsigned arithmetic 5e3532e allowedips: use native endian on lookup 856f105 allowedips: add selftest for allowedips_walk_by_peer 41df6d2 embeddable-wg-library: zero attribute padding 9a1bea6 keygen-html: add zip file example f182b1a qemu: retry on 404 in wget for kernel.org race
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Jo-Philipp Wich [Sun, 13 May 2018 16:33:47 +0000 (18:33 +0200)]
at91: sama5d4: fix bad mkubifs options
Drop the "-x lzo" compression type override from MKUBIFS_OPTS since we
do not support it in mkfs.ubifs. Attempting to use LZO compression results
in "Error: bad compressor name".
The build system also appends an explicit "--compr=zlib" to the mkfs command
line, turning the "-x" flag into a no-op anyway.
Jo-Philipp Wich [Sun, 13 May 2018 16:21:59 +0000 (18:21 +0200)]
kernel: let kmod-rtl8366-smi conditionally depend on kmod-of-mdio
We cannot depend on CONFIG_OF in the module definition context as this symbol
is not defined for OpenWrt menuconfig. Depend on the targets that appear to
need the kmod-of-mdio module instead.
The target dependency list may not be complete, it is based on the build
failures encountered by the build bots.
Refresh patches and backport upstream to current HEAD:
1f1873a Log warning on very large cachesize config, instead of truncating it. 0a496f0 Do unsolicited RAs for interfaces which appear after dnsmasq startup. e27825b Fix logging in previous. 1f60a18 Retry SERVFAIL DNSSEC queries to a different server, if possible. a0088e8 Handle query retry on REFUSED or SERVFAIL for DNSSEC-generated queries. 34e26e1 Retry query to other servers on receipt of SERVFAIL rcode. 6b17335 Add packet-dump debugging facility. 07ed585 Add logging for DNS error returns from upstream and local configuration. 0669ee7 Fix DHCP broken-ness when --no-ping AND --dhcp-sequential-ip are set. f84e674 Be persistent with broken-upstream-DNSSEC warnings.
Compile & run tested: ar71xx Archer C7 v2
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
hux [Mon, 7 May 2018 22:37:48 +0000 (00:37 +0200)]
dnsmasq: add specific interface procd triggers
Right now interface.update events are sent out by netifd upon interface state,
route, address (lifetime), prefix lifetime changes.
Dnsmasq is only interested in interface state changes and currently adds an
interface trigger for all the "interface.*" events.
In combination with commit 23bba9cb330, which triggers a SIGHUP signal to dnsmasq,
IPv6 address/prefix lifetime changes on the wan will trigger dnsmasq reloads which
can become frequent in case of shorter lifetimes.
To avoid frequent dnsmasq reload, this patch adds specific interface triggers.
During dnsmasq init it loops dhcp uci section; if the value of the ignore option
is set to 0, then the corresponding interface trigger is not installed.
Otherwise, if the ignore option value is 1, then procd_add_interface_trigger is
called which adds the interface trigger.
Hans Dedecker [Wed, 9 May 2018 09:24:50 +0000 (11:24 +0200)]
nghttp2: bump to 1.32.0
572735e4 Update manual pages e8d693c3 Bump up version number to 1.32.0, LT revision to 30:2:16 f44dfcd9 Update AUTHORS 1f1b0d93 Update manual pages ce8c749b Merge pull request #1173 from nghttp2/asio-client-sni 3e4f257b asio: Support client side SNI 86fab997 Upgrade neverbleed to the latest master c3ecd445 Merge pull request #1171 from nghttp2/h2load-rate-and-duration c65ca20a h2load: -r and --duration are mutually exclusive a5c408c5 Ignore all input after calling session_terminate_session 06379b28 Fix treatment of padding e04de48e Merge pull request #1162 from nghttp2/libressl 00964642 Use LIBRESSL_IN_USE instead of defined(LIBRESSL_VERSION_NUMBER) 8d0b4544 libressl 2.7 has X509_VERIFY_PARAM_* d8a34131 libressl 2.7 has SSL_CTX_get0_certificate 5db17d0a Compile with libressl 2.7.2 1bf69b56 Define LIBRESSL_LEGACY_API and LIBRESSL_2_7_API 3febaef1 Bump up LT revision to 30:1:16 due to v1.31.1 release b1bd6035 Fix frame handling b48bcb21 examples: Use C style comment in .c files 6f3ce2c7 examples: Remove unused lambda capture 2f9121cf Merge branch 'Sp1l-Sp1l/allow-no-npn' e65e7711 Add comment on #endif 636ef51b Fix compile error with -Wunused-function 400934e5 [PATCH] Allow building without NPN 4c3a3acf Merge pull request #1146 from vszakats/cmakestaticlib 9aa6002c Merge pull request #1144 from hellojaewon/master f342260b cmake: add ENABLE_STATIC_LIB option to build static lib a6dd4970 Fix typo 842509da Don't allow 101 HTTP status code because HTTP/2 removes HTTP Upgrade 4add618a Bump up version number to 1.32.0-DEV
735eaf2 Make sure we don't reallocate q->tins (we didn't anyway but his
really makes sure) 6c5ad6e Get rid of __GFP_NOWARN flag for memory allocation 2a37333 Don't need the wrapper for kvfree, and no need to check before calling it 2b1c631 Whitespace fix 7fe6e28 compat tidyup (for older kernel versions <4.4) 93b805c pedant tidy up superfluous semicolons on switch statements
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Sat, 5 May 2018 22:06:14 +0000 (00:06 +0200)]
brcm47xx: switch to the kernel 4.14
The biggest (and the only?) disadventage of this is obviously an
increased image size.
For mips74k the size of vmlinux goes up from 4186684 B to 4701436 B.
Most devices use LZMA compressed kernel so probably more important is
vmlinux.lzma size which goes up from 1342945 B to the 1508498 B.
Still this isn't something that should stop target kernel bump. There
are various adventages of kernel 4.14. If kernel / image size is a
serious concern for anyone, it's perfectly possible to use previous
release which is pretty solid for the brcm47xx.
The RavPower WD03 is a battery powered SD card reader and a USB port.
Specifications:
SOC: MediaTek MT7620N
BATTERY: 6000mah
WLAN: 802.11bgn
LAN: 1x 10/100 Mbps Ethernet
USB: 1x USB 2.0 (Type-A)
RAM: PM Tech PMD708416CTR-5CN 32 MB
FLASH: Holtek HT66F40 - 8 MB Flash
LED: Power button and 4 leds to indicate power level of the
battery (could not get control of that)
INPUT: Power, reset button
OTHER: USB SD-Card reader with card detect on GPIO#42
Tested and working:
- Ethernet
- 2.4 GHz WiFi (Correct MAC-address)
- installation from tftp
- OpenWRT sysupgrade (Preserving and non-preserving)
- LEDs
- Buttons
Installation:
- Download the sysupgrade image
- Place it in the root of a clean TFTP server running on your computer.
- Rename the image to "kernel" — be sure there is no file extension.
- Plug the WD03 into your computer via ethernet.
- Set your computer to use 10.10.10.254 as its IP address.
- With your WD03 shut down, hold down the power button until the first
white LED lights up.
- Push and hold the reset button and release the power button. Continue
holding the reset button for 30 seconds or until it begins searching
for files on your TFTP server, whichever comes first.
- The WD03 (10.10.10.128) will look for your computer at 10.10.10.254
and install the kernel file. Once it has finished installation of the
kernel file, it will search for a (nonexistent) rootfs file — when it
begins searching for this file, shut down the WD03 by holding the
power button normally.
- Start up your WD03 normally.
Backport patch accepted upstream which removes the reset asserts of the
xrx200 gphy driver on reboot/remove.
While doing a global software reset, these bits are not cleared and let
some bootloader fail to initialise the GPHYs. The bootloader don't expect
these bits to be set, as they aren't during power on.
The asserts were a workaround for a wrong syscon-reboot mask. With a mask
set which includes the GPHY resets of the first reset register, the
resets of the second reset register arn't required any more.
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Point at github which is new, maintained location for igmpproxy.
Remove all patches as all have been upstreamed.
Closes FS#1456
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Jaap Buurman [Tue, 1 May 2018 09:53:53 +0000 (11:53 +0200)]
igmpproxy: fix creation of firewall rules
The init sccript for igmpproxy uses the option 'network' both as an interface name for fetching the l3_device name and for creating the firewall rules. This only works if the name of the network and firewall zone are identical.
This commit introduces a new option 'zone' for configuring the upstream and downstream firewall zones in order for the init script to create the required firewall rules automatically. When no such options are given, the init script falls back to not creating the firewall rules and the user can opt to create these manually.
David Bauer [Tue, 24 Apr 2018 17:52:13 +0000 (19:52 +0200)]
ar71xx: add support for Fritz!Box 4020
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Rafał Miłecki [Mon, 7 May 2018 08:10:49 +0000 (10:10 +0200)]
ath79: relicense DTS files to the GPL 2.0+ / MIT
Some maintainers prefer DTS files licensed under permissive license like
MIT / BSD. As all DT bindings should be OS independent and DTS files are
pretty separated from Linux code it probably makes sense to share them
across projects.
The safest solution is to use dual licensing: that way it stays clear
these files can be used in GPL projects without depending on current
belief of licenses compatibility.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: John Crispin <john@phrozen.org>
fixed build error when external kernel is selected from menuconfig.
The patches present in target/linux/generic does not gets applied
to external kernel and build fails while compiling mac82011 &
regmap-core kernel modules. as a fix added check in Makefile for
CONFIG_EXTERNAL_KERNEL_TREE present or not.
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Cake is bearing fruits of kernel upstreaming efforts.
diffserv-llt dropped. DSCP mapping paper died and no one using it.
ack-filter re-written & simplified
tc userspace & cake kmod netlink interface usage changed in non
backwards compatible way, thus this once requires tc & cake to be
in-step. Change due to upstream requirements.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Bearing fruits of the latest upstreaming efforts on cake.
Changes: diffserv-llt dropped. The paper describing this DSCP
allocation has gone stale and doesn't appear used.
The userspace to kernel netlink messages for cake have been reworked in
a backwards incompatible way, so tc & cake must be bumped together this
once.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites.
Fixes wonkyness in some stats from some qdiscs under tc
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
John Crispin [Sun, 6 May 2018 08:20:11 +0000 (10:20 +0200)]
ath79: add new OF only target for QCA MIPS silicon
This target aims to replace ar71xx mid-term. The big part that is still
missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
subtargets will follow.
Rafał Miłecki [Mon, 7 May 2018 05:48:39 +0000 (07:48 +0200)]
bcm53xx: switch to the new/alternative SPI controller driver
This switches bcm53xx from spi-bcm53xx to the spi-bcm-qspi driver. The
later one was developed by Broadcom and is more advanced one. It
supports more modes, setting a speed, setting bits per word and uses
IRQs instead of polling.
This increases kernel size from 1808120 B to the 1811160 B (by 3040 B).
Roman Yeryomin [Fri, 4 May 2018 15:18:51 +0000 (18:18 +0300)]
gemini: fix hard disk boot on D-Link devices
Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:
- Supply a bootarg in the device tree so we can boot from
the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
we get nowhere, we cannot load this as a module because,
well, it is supposed to be loaded from the root partition
(chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)
Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
Roman Yeryomin [Tue, 1 May 2018 18:23:56 +0000 (21:23 +0300)]
gemini: cleanup kernel config
Disable video and input drivers - they are needed only for one
board and can be enabled via modules if/when UI will be available.
Use LED drivers from packages.
Cleanup other things unnecessarily overriding defaults.
Roman Yeryomin [Sun, 29 Apr 2018 14:38:07 +0000 (17:38 +0300)]
gemini: add 4.14 support
This adds the patches to get fairly complete Gemini support
using kernel v4.14. It is mainly a backport of patches from
kernel v4.16 with omissions of things like graphics that require
substantial changes and will be better handled once we move
to the v4.16 kernel proper.
On top of this are some WIP patches for USB support.
Tested on Raidsonic NAS4220B and D-link DNS-313.
ChangeLog v4->v5:
- Fix ethernet single gmac usecase
- Fix USB reset (patch from Hans)
- Fix Raidsonic ethernet skew delay
- Fix kernel config (bridge, squashfs, jffs2, usb)
- Disable second usb port on Raidsonic board until fotg210_hcd is fixed
ChangeLog v3->v4:
- Make sure to use tabs rather than spaces in base-files.
- Use the dns313 image tool from the firmware-utils.
- Break out the addition of the v4.14 patches and the removal
of the v4.4 patches to separate (big) patches.
ChangeLog v2->v3:
- Update the kernel config as indicated by Hauke Martens:
- Regenerate again after rebasing using kernel_oldconfig
dropping a few optimization settings that are now generic
- Drop CFG80211 stuff (module)
- Drop CIFS stuff (module)
- Drop MAC80211 (module)
- Drop wireless drivers (module)
- Enabled OverlayFS
- Added proper DNS-313 boot image generation with the special
file header tool.
- Disable CMA in the kernel
- Enable LZMA compression of the kernel
- Consequently name the nas4220b images nas4220b
- Update preinit MAC detection script to handle also DNS-313
- Add board.d/03_hdparm to set the disk to spin down after
1 minute by default, if we have the hdparm tool installed
ChangeLog v1->v2:
- Processed config through kernel_oldconfig
- Processed patches through make target/linux/{clean,refresh} V=99
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
reorganizing at91 subtargets based on sama5 soc features and this fix
below problems.
1. able to set neon flags to sama5d2 & sama5d4 subtargets.
2. fix the make clean which removes all the subtargets in bin folder.
3. able to configure kernel specific to subtarget.
4. able to set vfpu4 flags to samad3 subtargets.
copying at91bootstrap and uboot binaries to sdcard image is done
based on device name instead of dts name and this avoids creating
multiple u-boot and at91bootstrap binaries.
Hans Dedecker [Tue, 1 May 2018 20:00:25 +0000 (22:00 +0200)]
iproute2: update to 4.16
Update to latest version of iproute2, refresh patches.
See https://lkml.org/lkml/2018/4/2/349 for a full overview of the
changes in 4.16.
Build and tested on AR7xxx against musl
Rosen Penev [Tue, 1 May 2018 19:59:05 +0000 (12:59 -0700)]
uboot-envtools: Change download to git.
Currently, the build system uses an openwrt mirror which does not currently
work and FTP can be unreliable under several circumstances. This change
implicitly allows using all the mirrors to download.
Daniel Golle [Sat, 28 Apr 2018 18:55:51 +0000 (20:55 +0200)]
wolfssl: fix options and add support for wpa_supplicant features
Some options' default values have been changed upstream, others were
accidentally inverted (CONFIG_WOLFSSL_HAS_DES3). Also add options
needed to build hostapd/wpa_supplicant against wolfssl.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Fri, 30 Mar 2018 14:57:52 +0000 (16:57 +0200)]
libnl: Disable debug support
This dereses the size of the libnl pakcage a little bit
old:
857 bin/packages/mips_24kc/base/libnl_3.4.0-1_mips_24kc.ipk
41195 bin/packages/mips_24kc/base/libnl-core_3.4.0-1_mips_24kc.ipk
7818 bin/packages/mips_24kc/base/libnl-genl_3.4.0-1_mips_24kc.ipk
24322 bin/packages/mips_24kc/base/libnl-nf_3.4.0-1_mips_24kc.ipk
136075 bin/packages/mips_24kc/base/libnl-route_3.4.0-1_mips_24kc.ipk\ 2
sama5d2 & samad4 have neon feature and sama5d3 does not have neon
feature due to which sama5d3 boot fails with error message Kernel
panic - not syncing: Attempted to kill init! exitcode=0x00000004.
removing neon & VFPv4 support to fix this
Simon Paterson [Sun, 29 Apr 2018 23:05:42 +0000 (11:05 +1200)]
ar71xx: Add userspace support for Mikrotik rb-2011iLS
Kernel support already present.
Patch adds userspace for the 'iLS' suffix model of the RB2011 family.
Enables correct initial switch settings, sysupgrade, etc.
https://mikrotik.com/product/RB2011iLS-IN
Signed-off-by: Simon Paterson <simon.paterson.nz@gmail.com>
projects / thirdparty / openwrt.git / log
