Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-yocto.inc: Run kernel_version_sanity_check with final source
Ensure that the kernel_version_sanity_check task runs after all source
modifications are complete, including any that are introduced during the
kernel_metadata task. This also avoids any race condition issues when
kernel_version_sanity_check and kernel_metadata tasks are running at the
same time.
Turkey switched from EET/EEST (+02/+03) to permanent +03,
effective 2016-09-07. (Thanks to Burak AYDIN.) Use "+03" rather
than an invented abbreviation for the new time.
New leap second 2016-12-31 23:59:60 UTC as per IERS Bulletin C 52.
(Thanks to Tim Parenti.)
Changes to past time stamps
For America/Los_Angeles, spring-forward transition times have been
corrected from 02:00 to 02:01 in 1948, and from 02:00 to 01:00 in
1950-1966.
For zones using Soviet time on 1919-07-01, transitions to UT-based
time were at 00:00 UT, not at 02:00 local time. The affected
zones are Europe/Kirov, Europe/Moscow, Europe/Samara, and
Europe/Ulyanovsk. (Thanks to Alexander Belopolsky.)
Changes to past and future time zone abbreviations
The Factory zone now uses the time zone abbreviation -00 instead
of a long English-language string, as -00 is now the normal way to
represent an undefined time zone.
Several zones in Antarctica and the former Soviet Union, along
with zones intended for ships at sea that cannot use POSIX TZ
strings, now use numeric time zone abbreviations instead of
invented or obsolete alphanumeric abbreviations. The affected
zones are Antarctica/Casey, Antarctica/Davis,
Antarctica/DumontDUrville, Antarctica/Mawson, Antarctica/Rothera,
Antarctica/Syowa, Antarctica/Troll, Antarctica/Vostok,
Asia/Anadyr, Asia/Ashgabat, Asia/Baku, Asia/Bishkek, Asia/Chita,
Asia/Dushanbe, Asia/Irkutsk, Asia/Kamchatka, Asia/Khandyga,
Asia/Krasnoyarsk, Asia/Magadan, Asia/Omsk, Asia/Sakhalin,
Asia/Samarkand, Asia/Srednekolymsk, Asia/Tashkent, Asia/Tbilisi,
Asia/Ust-Nera, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg,
Asia/Yerevan, Etc/GMT-14, Etc/GMT-13, Etc/GMT-12, Etc/GMT-11,
Etc/GMT-10, Etc/GMT-9, Etc/GMT-8, Etc/GMT-7, Etc/GMT-6, Etc/GMT-5,
Etc/GMT-4, Etc/GMT-3, Etc/GMT-2, Etc/GMT-1, Etc/GMT+1, Etc/GMT+2,
Etc/GMT+3, Etc/GMT+4, Etc/GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8,
Etc/GMT+9, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Europe/Kaliningrad,
Europe/Minsk, Europe/Samara, Europe/Volgograd, and
Indian/Kerguelen. For Europe/Moscow the invented abbreviation MSM
was replaced by +05, whereas MSK and MSD were kept as they are not
our invention and are widely used.
Changes to zone names
Rename Asia/Rangoon to Asia/Yangon, with a backward compatibility link.
(Thanks to David Massoud.)
LICENSE file checksum changed do to a verbage change.
Changes to code
zic no longer generates binary files containing POSIX TZ-like
strings that disagree with the local time type after the last
explicit transition in the data. This fixes a bug with
Africa/Casablanca and Africa/El_Aaiun in some year-2037 time
stamps on the reference platform. (Thanks to Alexander Belopolsky
for reporting the bug and suggesting a way forward.)
If the installed localtime and/or posixrules files are symbolic
links, zic now keeps them symbolic links when updating them, for
compatibility with platforms like OpenSUSE where other programs
configure these files as symlinks.
zic now avoids hard linking to symbolic links, avoids some
unnecessary mkdir and stat system calls, and uses shorter file
names internally.
zdump has a new -i option to generate transitions in a
more-compact but still human-readable format. This option is
experimental, and the output format may change in future versions.
(Thanks to Jon Skeet for suggesting that an option was needed,
and thanks to Tim Parenti and Chris Rovick for further comments.)
Changes to build procedure
An experimental distribution format is available, in addition
to the traditional format which will continue to be distributed.
The new format is a tarball tzdb-VERSION.tar.lz with signature
file tzdb-VERSION.tar.lz.asc. It unpacks to a top-level directory
tzdb-VERSION containing the code and data of the traditional
two-tarball format, along with extra data that may be useful.
(Thanks to Antonio Diaz Diaz, Oscar van Vlijmen, and many others
for comments about the experimental format.)
The release version number is now more accurate in the usual case
where releases are built from a Git repository. For example, if
23 commits and some working-file changes have been made since
release 2016g, the version number is now something like
'2016g-23-g50556e3-dirty' instead of the misleading '2016g'.
Official releases uses the same version number format as before,
e.g., '2016g'. To support the more-accurate version number, its
specification has moved from a line in the Makefile to a new
source file 'version'.
The experimental distribution contains a file to2050.tzs that
contains what should be the output of 'zdump -i -c 2050' on
primary zones. If this file is available, 'make check' now checks
that zdump generates this output.
'make check_web' now works on Fedora-like distributions.
Changes to documentation and commentary
tzfile.5 now documents the new restriction on POSIX TZ-like
strings that is now implemented by zic.
Comments now cite URLs for some 1917-1921 Russian DST decrees.
(Thanks to Alexander Belopolsky.)
tz-link.htm mentions JuliaTime (thanks to Curtis Vogt) and Time4J
(thanks to Meno Hochschild) and ThreeTen-Extra, and its
description of Java 8 has been brought up to date (thanks to
Stephen Colebourne). Its description of local time on Mars has
been updated to match current practice, and URLs have been updated
and some obsolete ones removed.
Robert Yang [Wed, 28 Sep 2016 05:35:06 +0000 (22:35 -0700)]
pseudo: quiet diagnostics during startup for pseudo -d
When the client spawns a pseudo server, it starts out sending diagnostics
to stderr. This can be spammy in some cases with races during startup;
everything resolves, but we get scary-looking diagnostics. So shove
those into a log file.
Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to start getty on a non-existent console will spew I/O errors
into auth.log on some hardware. Avoid this behavior by checking that
ttyS0 is a console that exists.
Ed Bartosh [Tue, 27 Sep 2016 15:16:56 +0000 (16:16 +0100)]
bitbake: toaster: make error message more informative
Error message
ERROR: Unprocessed MetadataEvent <bb.event.MetadataEvent object at 0x7f750e671a58>
doesn't give a lot of information about the event. It just prints
event object, which is always bb.event.MetadataEvent.
Including event type into the error message should make it more
informative:
ERROR: Unprocessed MetadataEvent TaskArtifacts
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New MetadataEvent 'TaskArtifacts' causes this error.
Processing of this event will hopefully be implemented in future.
For now it should be enough to just skip it.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Tue, 27 Sep 2016 15:16:54 +0000 (16:16 +0100)]
bitbake: toaster: fix handling of EnvironmentError
Due to the bug in processing EnvironmentError exception,
toasterui ignores it. As EnvironmentError is a base for OSError
and IOError this means that all OSError and IOError exceptions
were silently ignored.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Tue, 27 Sep 2016 15:16:53 +0000 (16:16 +0100)]
bitbake: toaster: check if file exist
Buildinfohelper assumes that all files mentioned in
manifest exist in deploy/ directory, which is not always
the case. Toaster crashes with OSError trying to
call os.stat on non-existing file.
Checking if file exists before processing it should
fix this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Tue, 27 Sep 2016 15:16:52 +0000 (16:16 +0100)]
bitbake: toaster: stop modifying OEROOT in toaster script
Setting OEROOT in toaster script makes oe-init-build-env to
break with error:
bash: ../bitbake/bin/../../scripts/oe-buildenv-internal: No such file or directory
This happens because OEROOT contains path relative to build
directory.
Renamed OEROOT to OE_ROOT and unset it after it's used.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Mon, 26 Sep 2016 10:59:37 +0000 (13:59 +0300)]
bitbake: toaster: layerdetails Update implementation of delete imported layer
Update the implementation of delete an imported layer so that it is
consistent with the other delete messages and wording. Also use the new
libtoaster way of setting a notification that the delete was successful.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Mon, 26 Sep 2016 10:59:30 +0000 (13:59 +0300)]
bitbake: toaster: libtoaster Add a global notification set/show mechanism
We now have a number of places where we show change notifications based
on an event in a previous page (imported a layer, deleted a build,
deleted a project etc) and we show these notifications on various pages
so we add a simple notification utility to libtoaster.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Mon, 26 Sep 2016 10:59:29 +0000 (13:59 +0300)]
bitbake: toaster: move MostRecentBuildsView to its own widget
This view is specific to the builds dashboard rather than gernic api so
like ToasterTable and ToasterTypeAhead we class it as a widget as it has
a single purpose. Also clean up some flake8 identified issues.
Original author of the code moved in this commit is Elliot Smith.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Mon, 26 Sep 2016 10:59:28 +0000 (13:59 +0300)]
bitbake: toaster: Clean up and convert to rest api project edit and get calls
Convert the project xhr calls into proper rest api and port the client
side calls to use the new API. Fix all the pyflakes identified issues
and clean up unused fields.
Also remove the api and client side code for changing release on the fly
as this is no longer supported.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SRC_URI was changed to point gentoo distfiles because now Oracle
request authorization for download the source code [1], there are no changes
in the LICENSE since version 6.0.20 when the LICENSE changes to AGPL-3
[2], also the md5sum was review to be sure that is the same.
This minor upgrade fix an issue related to multiple rpm instances querying
the database [3].
The bugfixes related are,
- Fixed a bug that may lead to a crash when opening multiple environments
in a multi-threaded program.
- Fixed a bug where closing a panic environment raised access violation
and crashed the program.
For see the complete list of changes mostly bugfixes between 6.0.30 and 6.0.35 [4].
Richard Purdie [Wed, 28 Sep 2016 14:59:34 +0000 (15:59 +0100)]
cross-canadian/libgcc-common: Fixes for arm multilib
Arm is unusual in that we force it to "linux-gnueabi" and "linux" doesn't
build. This was causing problems for multilib configurations which were assuming
"linux" was the default compiler rather than linux-gnueabi.
This change does two things, ensures symlinks are generated for linux-gnueabi
and also adapts the libgcc code to account for the difference on arm.
It still needs to immediately expand/save TARGET_VENDOR but we defer
deciding what TARGET_OS should be until we know TARGET_ARCH (which the
multilib code may change).
[YOCTO #8642]
Note that sanity tests of a 32 bit arm multilib still break due to issues
with the kernel headers on a mixed bit system. This looks to be a general
headers issue for the platform though and a different type of bug.
parselogs: Update uvesafb errors in qemu whitelist
This change only whitelists the timeout message in infinite
wait case in uvesafb driver.
With the latest timeout patch introducing infinite wait in
uvesafb driver, we whitelist the timeout message since it works
as a warning for issues related to timeout not to be fixed in
build servers.
We remove other errors for bug-discovering purposes in some cases
where these lines are still worthy to be caught (not whitelisted):
The removed errors show up again in the infinite wait case. It
indicates a different root cause or the timeout patch doesn't work
correctly.
Timeout happens when developers explicitly set a non-negative timeout
of a limited period to wait for task completion in uvesafb driver.
Timeout or/and errors occur when kernel doesn't have the latest
timeout patch in driver.
Ed Bartosh [Wed, 28 Sep 2016 09:16:14 +0000 (12:16 +0300)]
runqemu: explicitly set image format
QEMU produces a warning if drive format is not specified:
WARNING: Image format was not specified for
'tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.wic'
and probing guessed raw.
Automatically detecting the format is dangerous for raw images,
write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Set image format to 'vmdk', 'qcow2' or 'vdi' for correspondent image
types. Set it to 'raw' for the rest of image types.
Martin Jansa [Wed, 28 Sep 2016 07:28:49 +0000 (09:28 +0200)]
qemuboot: don't fail when QB_DEFAULT_KERNEL isn't symlink
* in some cases we might set QB_DEFAULT_KERNEL to the real filename
instead of symlink and then this whole readlink work around actually
breaks the build, because os.readlink fails on normal files:
Scott Rifenbark [Mon, 26 Sep 2016 15:51:42 +0000 (08:51 -0700)]
dev-manual: Updated the example to identify GPL files.
Fixes [YOCTO #10323]
In the Providing the Source Code section, I replaced the 3-line
code example that returns GPL files. The bits I put in are a
script that does the trick. The 3-line example was not working.
Scott Rifenbark [Thu, 22 Sep 2016 22:55:29 +0000 (15:55 -0700)]
ref-manual, dev-manual: Add information on devpyshell
Fixes [YOCTO #9166]
In the dev-manual, I added a new section titled "Using a
Development Python Shell." This section is similar to the
section that talks about using devshell. The section is
tied to a reference section on the do_devpyshell task.
In the ref-manual, I entered a new task reference for the
do_devpyshell task. It is brief and references into the
new section in the dev-manual.
Scott Rifenbark [Thu, 22 Sep 2016 21:27:04 +0000 (14:27 -0700)]
ref-manual, dev-manual: Updates for "staging" discussion and variables.
Fixes [YOCTO #8631]
These fixes cover the following:
* New glossary entry for SYSROOT_DIRS
* New glossary entry for SYSROOT_DIRS_NATIVE
* New glossary entry for SYSROOT_DIRS_BLACKLIST
* New section titled "Sharing Files Between Recipes" in the
dev-manual's "Writing a New Recipe" section.
Scott Rifenbark [Thu, 22 Sep 2016 17:16:44 +0000 (10:16 -0700)]
dev-manual: Added new "Dependencies" section to writing new rec.
Fixes [YOCTO #9679]
I added a new section titled "Dependencies" inside the section
that talks about writing a new recipe. This section details
both build-time and runtime dependency behavior and conditions.
Scott Rifenbark [Thu, 22 Sep 2016 14:35:37 +0000 (07:35 -0700)]
dev-manual, sdk-manual: Applied review comments for SDK movement
I applied several nits across the manuals based on reviewer
comments. All these corrections relate to the task of shuffling
topics around that have to do with the extensible SDK and the
devtool.
Scott Rifenbark [Wed, 21 Sep 2016 23:06:18 +0000 (16:06 -0700)]
ref-manual: Added two new tips
Fixes [YOCTO #10297]
Updated the "Other Tips" section to include a couple new tips.
* Remove the /tmp directory as a way to work-around temporary
build issues.
* Create a little method to help you search the massive
amounts of bits for whatever. Also, suggested filing bugs
against the docs if a feature is too hard to find or figure out.
I added an additional paragraph at the end of the section that
provided more detail on what the bitbake -e and bitbake -e recipe
commands provide in the way output.
Scott Rifenbark [Wed, 21 Sep 2016 18:44:43 +0000 (11:44 -0700)]
sdk-manual, dev-manual: Applied SDK review edits.
* Removed the note box formatting for the cross-reference
from the sdk-manual and dev-manual sections that
talk about devtool. The reference is now non-note
form and goes to the ref-manual devtool quick ref.
* Added devtool upgrade as a third item in the list that
introduces methods to use devtool.
* Fixed the working on the devtool finish step 5 for both
the dev-manual and sdk-manual.
* Renamed the new chapter that describes different projects
you can use devtool on. The focus is on using the SDK
toolchain directly.
* Scrubbed the entire sdk-manual for the term "toolchain
installer" and replaced with "SDK installer".
Scott Rifenbark [Mon, 19 Sep 2016 23:45:26 +0000 (16:45 -0700)]
sdk-manual: New Projet chapter added and other fixes
I extracted the sections on Makefile, Autotools, and Eclipse into
their own new chapter. Seemed to make sense as they are projet
types for both standard and extensible SDK types. Also, swapped
the order of appearance from standard first to extensible first.
This swapping caused a bit of rewriting.
Scott Rifenbark [Mon, 19 Sep 2016 20:52:07 +0000 (13:52 -0700)]
documentation: devtool upgrade and quick ref changes to mult manuals
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
In order to load balance Alejandro H. there are new maintainers for the following
packages: aspell, bc, cronie, libusb(-compact), nfs-utils, pcmanfm, ruby, swig,
texinfo, tex-info-dummy-native, ttf-bitstream-vera, unzip and which.
Richard Purdie [Wed, 28 Sep 2016 08:16:46 +0000 (09:16 +0100)]
oeqa/sstatetests: Ensure we cover deb packaging backend for sstate test
Currently we weren't testing the deb backaned for sstate correctness
and there was a bug that had crept in. Ensure we cover all package
backends with the test regardless of what the distro/conf sets.
Richard Purdie [Wed, 28 Sep 2016 08:14:55 +0000 (09:14 +0100)]
dpkg: Only set DEB_HOST_ARCH in target case
If we don't do this, the sstate checksums vary for dpkg-native depending
on which MACHINE is set and this is clearly incorrect. It leads
to dpkg-native rebuilding far too often.
This function never worked because the SDK_OUTPUT and SDKPATH vars are
written bash-style in a python function. The only reason it never failed
a build is because the function bails out the start because of the flag
CHECK_SDK_SYSROOTS.
And I guess nobody tested with CHECK_SDK_SYSROOTS enabled until now.
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
This dependency was manually added in 3dec9ad1cd6a ("perl: module
overload rdpends on overloading") but was (mistakenly?) removed by 06d43a90acbe ("perl: 5.20.0 -> 5.22.0"). Restore it.
Since the upgrade to 2.8, lttng-tools' test harness silently succeeds
but doesn't actually run the tests. This is because upstream made
some changes in their test harness:
Updates to address this include:
- drop now-irrelevant patch
- change the ptest-run make target
- remove indiscriminate search/replace commands from do_install_ptest
- copy entire build directory into PTEST_PATH and then remove unneeded files
- use lttng binaries installed on the system for the tests
- add lttng-tools-ptest runtime dependencies
- lttng-tools itself
- babeltrace, used by the test harness to process traces
- perl modules required by babelstats.pl test script
- procps (for pgrep, pidof)
- gawk
- remove unnecessary chmod and munging of utils.sh script library
- remove checkpatch from ptest installation tree
- avoid path-munging of libtool artifacts altogether
- use more efficient find+sed patterns to munge Makefiles
- reduce test harness output to conform to ptest rules
On qemux86-64 and qemuarm I get relatively stable results, with
PASS/FAIL varying by +-1 on successive runs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-yocto: Move PREFERRED_PROVIDER check to be generic
This check ensures that when the PREFERRED_PROVIDER for virtual/kernel
changes, the previous instances gets removed correctly so when the new
instance installs files into the shared area there is not an overlap of
old and new.
SDK: Allow changing SDKMACHINE without wiping TMP folder
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
By default, libsolv uses the rpm logic for version comparison, which is
not quite the same as debian. Opkg now sets the distribution type for
libsolv to be debian. But for that to work, libsolv needs to be compiled
with MULTI_SEMANTICS=ON.
parselogs.py: Add amd_nb error to x86_common whitelist
This has always silently failed on hardware without AMD Northbridge,
and a recent kernel patch made it not silent. It would be ideal to only
whitelist the error for genericx86 MACHINEs and disable the CONFIG
option that enables it in intel-* MACHINEs, but in order to disable
this configuration option we would have to enable EXPERT and
DEBUG_KERNEL, which we don't want. Instead just whitelist it on all
x86 MACHINEs.
Maxin B. John [Sun, 25 Sep 2016 18:40:05 +0000 (21:40 +0300)]
gst-player: Disable visualizations
On some machines, visualizations in gst-player trigger a bug in
xvimagesink. Till we have a proper fix, disable the visualization
rather than downgrading the xvimagesink.
Backport patch to fix CVE-2016-1000110 from python upstream:
for python2.7
https://hg.python.org/cpython/rev/ba915d561667/
for python3
https://hg.python.org/cpython/rev/a0ac52ed8f79
Patrick Ohly [Mon, 26 Sep 2016 09:55:16 +0000 (11:55 +0200)]
archive.bbclass: fix do_ar_original archiving of multiple source repos
When a recipe uses more than one source which isn't a plain file (for
example, multiple git repos), then do_ar_original created the source
archives using the same filename and thus only archived one source.
The "name" parameter is used as file suffix to create unique names for
each source, leading to archives following this pattern:
deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz.
The ${PF} part is a bit redundant, which may or may not be
desirable. The patch is more localized this way (no need to modify
create_tarball()).
Patrick Ohly [Mon, 26 Sep 2016 09:55:15 +0000 (11:55 +0200)]
archiver.bbclass: ignore unpack sub-directories in do_ar_original
Support for absolute paths in the "subdir" parameter was recently
added (bitbake rev: c3873346c6fa). The git fetcher has supported
absolute paths in "destsuffix" already before.
When the path is absolute as in destsuffix=${S}/foobar, the tmpdir
used by do_ar_original gets ignored, which breaks:
- source code archiving (tmpdir is empty)
- compilation due to race conditions (for example, ${S} getting
modified by do_ar_original while do_compile runs)
To solve this, these parameters get removed from URLs before
instantiating the fetcher for them.
This is done unconditionally also for relative paths, because these
paths are not useful when archiving the original source (upstream
source does not have them, they only get used by the recipe during
compilation).
* Add PACKAGECONFIG to add proper dependencies for:
graph_parallel, locale, and mpi.
* boost-mpi depends on mpich which is in meta-oe,
and boost-graph_parallel depends on boost-mpi,
so they are disabled by default, but can be enabled
in a distro that needs them.
* context and coroutine are added only for x86 and powerpc.
Joe MacDonald [Mon, 26 Sep 2016 13:17:08 +0000 (09:17 -0400)]
devtool: Add a line break to generated README
When devtool creates a new workspace, it produced a README with one very
long line and no space following 'bblayers.conf'. Add a line break as was
intended.
Richard Purdie [Mon, 26 Sep 2016 16:25:26 +0000 (17:25 +0100)]
prelink: Manipulate library paths to match the target system library setup
Currently, prelink doesn't work unless base_libdir/libdir match
its hardcoded values. This patch manipulates those paths so that
they match the values set in the variables and handles multilib
configurations too. The manipulations only happen in the target
case, if needed.
Richard Purdie [Mon, 26 Sep 2016 16:22:24 +0000 (17:22 +0100)]
utils: Add all_multilib_tune_list function
Its useful to be able to query a list of variables to obtain the values
in each multilib context. This adds such a function which works even
if called in the non-default recipe context.
machine/qemu*: Add comment regarding the reason for virtio-rng-pci
Bring across the comment that was in runqemu regarding why the
virtio-rng-pci device was needed. This comment is added to each location
where the virtio-rng-pci device is added.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
