All invocations of do_get_submodule_displaypath() pass
get_super_prefix() as the super_prefix arg, which is exactly the same
as get_submodule_displaypath().
Replace all calls to do_get_submodule_displaypath() with
get_submodule_displaypath(), and since it has no more callers, remove
it.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the other subcommands, "git submodule--helper update" uses the
"--recursive-prefix" flag instead of "--super-prefix". The two flags are
otherwise identical (they only serve to compute the 'display path' of a
submodule), except that there is a dedicated helper function to get the
value of "--super-prefix".
This inconsistency exists because "git submodule update" used to pass
"--recursive-prefix" between shell and C (introduced in [1]) before
"--super-prefix" was introduced (in [2]), and for simplicity, we kept
this name when "git submodule--helper update" was created.
Remove "--recursive-prefix" and its associated code from "git
submodule--helper update", replacing it with "--super-prefix".
To use "--super-prefix", module_update is marked with
SUPPORT_SUPER_PREFIX. Note that module_clone must also be marked with
SUPPORT_SUPER_PREFIX, otherwise the "git submodule--helper clone"
subprocess will fail check because "--super-prefix" is propagated via
the environment.
[1] 48308681b0 (git submodule update: have a dedicated helper for
cloning, 2016-02-29)
[2] 74866d7579 (git: make super-prefix option, 2016-10-07)
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the SUPPORT_SUPER_PREFIX flag from "add", "init" and
"summary". For the "add" command it hasn't been used since [1],
likewise for "init" and "summary" since [2] and [3], respectively.
As implemented in 74866d75793 (git: make super-prefix option,
2016-10-07) the SUPPORT_SUPER_PREFIX flag in git.c applies for the
entire command, but as implemented in 89c86265576 (submodule helper:
support super prefix, 2016-12-08) we assert here in
cmd_submodule__helper() that we're not getting the flag unexpectedly.
submodule--helper: use correct display path helper
Replace a chunk of code in update_submodule() with an equivalent
do_get_submodule_displaypath() invocation. This is already tested by
t/t7406-submodule-update.sh:'submodule update --init --recursive from
subdirectory', so no tests are added.
The two are equivalent because:
- Exactly one of recursive_prefix|prefix is non-NULL at a time; prefix
is set at the superproject level, and recursive_prefix is set when
recursing into submodules. There is also a BUG() statement in
get_submodule_displaypath() that asserts that both cannot be non-NULL.
- In get_submodule_displaypath(), get_super_prefix() always returns NULL
because "--super-prefix" is never passed. Thus calling it is
equivalent to calling do_get_submodule_displaypath() with super_prefix
= NULL.
Therefore:
- When recursive_prefix is non-NULL, prefix is NULL, and thus
get_submodule_displaypath() just returns prefixed_path. This is
identical to calling do_get_submodule_displaypath() with super_prefix
= recursive_prefix because the return value is still the concatenation
of recursive_prefix + update_data->sm_path.
- When prefix is non-NULL, prefixed_path = update_data->sm_path. Thus
calling get_submodule_displaypath() with prefixed_path is equivalent
to calling do_get_submodule_displaypath() with update_data->sm_path
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_submodule() uses duplicated code to compute
update_data->displaypath and next.recursive_prefix. The latter is just
the former with "/" appended to it, and since update_data->displaypath
not changed outside of this statement, we can just reuse the already
computed result.
We can go one step further and remove the reference to
next.recursive_prefix altogether. Since it is only used in
update_data_to_args() (to compute the "--recursive-prefix" flag for the
recursive update child process) we can just use the already computed
.displaypath value of there.
Delete the duplicated code, and remove the unnecessary reference to
next.recursive_prefix. As a bonus, this fixes a memory leak where
prefixed_path was never freed (this leak was first reported in [1]).
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in 48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path. As discussed in the
next commit the "Skipping" output isn't exactly what we want, but
let's test how we behave now, before changing the existing behavior.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup.sh: remove "say" function, change last users
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in 0b624b4ceee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the use of the "$GIT_QUIET" variable in favor of our own
"$quiet", ever since b3c5f5cb048 (submodule: move core cmd_update()
logic to C, 2022-03-15) we have not used the "say" function in
git-sh-setup.sh, which is the only thing that's affected by using
"GIT_QUIET".
We still want to support --quiet for our own use though, but let's use
our own variable for that. Now it's obvious that we only care about
passing "--quiet" to "git submodule--helper", and not to change the
output of any "say" invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the preceding commit which taught "git submodule--helper
update" to understand "--merge", "--checkout" and "--rebase" and use
those options instead of "--update=(rebase|merge|checkout|none)" when
the command invokes itself.
Unlike the preceding change this isn't strictly necessary to
eventually change "git-submodule.sh" so that it invokes "git
submodule--helper update" directly, but let's remove this
inconsistency in the command-line interface. We shouldn't need to
carry special synonyms for existing options in "git submodule--helper"
when that command can use the primary documented names instead.
But, as seen in the post-image this makes the control flow within
"builtin/submodule--helper.c" simpler, we can now write directly to
the "update_default" member of "struct update_data" when parsing the
options in "module_update()".
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: understand --checkout, --merge and --rebase synonyms
Understand --checkout, --merge and --rebase synonyms for
--update={checkout,merge,rebase}, as well as the short options that
'git submodule' itself understands.
This removes a difference between the CLI API of "git submodule" and
"git submodule--helper", making it easier to make the latter an alias
for the former. See 48308681b07 (git submodule update: have a
dedicated helper for cloning, 2016-02-29) for the initial addition of
--update.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: report "submodule" as our name in some "-h" output
Change the user-facing "git submodule--helper" commands so that
they'll report their name as being "git submodule". To a user these
commands are internal implementation details, and it doesn't make
sense to emit usage about an internal helper when "git submodule" is
invoked with invalid options.
Now we'll start with "usage: git submodule [...]" in both of those
cases. This change does not alter the "list", "name", "clone",
"config" and "create-branch" commands, those are internal-only (as an
aside; their usage info should probably invoke BUG(...)). This only
changes the user-facing commands.
The "status", "deinit" and "update" commands are not included in this
change, because their usage information already used "submodule"
rather than "submodule--helper".
I don't think it's currently possible to emit some of this usage
information in practice, as git-submodule.sh will catch unknown
options, and e.g. it doesn't seem to be possible to get "add" to emit
its usage information from "submodule--helper".
Though that change may be superfluous now, it's also harmless, and
will allow us to eventually dispatch further into "git
submodule--helper" from git-submodule.sh, while emitting the correct
usage output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: rename "absorb-git-dirs" to "absorbgitdirs"
Rename the "absorb-git-dirs" subcommand to "absorbgitdirs", which is
what the "git submodule" command itself has called it since the
subcommand was implemented in f6f85861400 (submodule: add
absorb-git-dir function, 2016-12-12).
Having these two be different will make it more tedious to dispatch to
eventually dispatch "git submodule--helper" directly, as we'd need to
retain this name mapping. So let's get rid of this needless
inconsistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e84c3cf3dc3 (git-submodule.sh: accept verbose flag in cmd_update to
be non-quiet, 2018-08-14) the "git submodule update" sub-command was
made to understand "-v", but the option was never documented.
The only in-tree user has been this test added in 3ad0401e9e6 (submodule update: silence underlying merge/rebase with
"--quiet", 2020-09-30), it wasn't per-se testing --quiet, but fixing a
bug in e84c3cf3dc3: It used to set "GIT_QUIET=0" instead of unsetting
it on "-v", and thus we'd end up passing "--quiet" to "git
submodule--helper" on "-v", since the "--quiet" option was passed
using the ${parameter:+word} construct.
Furthermore, even if someone had used the "-v" option they'd only be
getting the default output. Our default in both git-submodule.sh and
"git submodule--helper" has been to be "verbose", so the only way this
option could have matter is if it were used as e.g.:
git submodule --quiet update -v [...]
I.e. to undo the effect of a previous "--quiet" on the command-line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: have --require-init imply --init
Adjust code added in 0060fd1511b (clone --recurse-submodules: prevent
name squatting on Windows, 2019-09-12) to have the internal
--require-init option imply --init, rather than having
"git-submodule.sh" add it implicitly.
This change doesn't make any difference now, but eliminates another
special-case where "git submodule--helper update"'s behavior was
different from "git submodule update". This will make it easier to
eventually replace the cmd_update() function in git-submodule.sh.
We'll still need to keep the distinction between "--init" and
"--require-init" in git-submodule.sh. Once cmd_update() gets
re-implemented in C we'll be able to change variables and other code
related to that, but not yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 5c08dbbdf1a (git-submodule: fix subcommand parser, 2008-01-15) the
"--branch" option was supported as an option to "git submodule"
itself, i.e. "git submodule --branch" as a side-effect of its
implementation.
Then in b57e8119e6e (submodule: teach set-branch subcommand,
2019-02-08) when the "set-branch" subcommand was added the assertion
that we shouldn't have "--branch" anywhere except as an argument to
"add" and "set-branch" was copy/pasted from the adjacent check for
"--cache" added (or rather modified) in 496eeeb19b9 (git-submodule.sh:
avoid "test <cond> -a/-o <cond>", 2014-06-10).
But there's been a logic error in that check, which at a glance looked
like it should be supporting:
But due to "||" in the condition (as opposed to "&&" for "--cache") if
we have "--branch" here already we'll emit usage, even for "add" and
"set-branch".
So in addition to never having documented this form, it hasn't worked
since b57e8119e6e was released with v2.22.0.
So it's safe to remove this code. I.e. we don't want to support the
form noted above, but only:
git-submodule.sh: make the "$cached" variable a boolean
Remove the assignment of "$1" to the "$cached" variable. As seen in
the initial implementation in 70c7ac22de6 (Add git-submodule command,
2007-05-26) we only need to keep track of if we've seen the --cached
option, not save the "--cached" string for later use.
In 28f9af5d25e (git-submodule summary: code framework, 2008-03-11)
"$1" was assigned to it, but since there was no reason to do so let's
stop doing it. This trivial change will make it easier to reason about
an eventual change that'll remove the cmd_summary() function in favor
of dispatching to "git submodule--helper summary" directly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the $prefix variable which isn't used anymore, and hasn't been
since b3c5f5cb048 (submodule: move core cmd_update() logic to C,
2022-03-15).
Before that we'd use it to invoke "git submodule--helper" with the
"--recursive-prefix" option, but since b3c5f5cb048 that "git
submodule--helper" option is only used when it invokes itself.
So the "--recursive-prefix" option is still in use, but at this point
only when the helper invokes itself during submodule recursion. See
the "--recursive-prefix" option added in c51f8f94e5b (submodule--helper: run update procedures from C,
2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sanitize_submodule_env() function was last used before b3c5f5cb048 (submodule: move core cmd_update() logic to C,
2022-03-15), let's remove it.
This also allows us to remove clear_local_git_env() from
git-sh-setup.sh. That function hasn't been documented in
Documentation/git-sh-setup.sh, and since 14111fc4927 (git: submodule
honor -c credential.* from command line, 2016-02-29) it had only been
used in the sanitize_submodule_env() function being removed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 26 Jun 2022 09:29:35 +0000 (11:29 +0200)]
revert: config documentation fixes
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Thu, 23 Jun 2022 19:02:01 +0000 (15:02 -0400)]
Documentation/config/transfer.txt: fix typo
Commit 7281c196b1 (transfer doc: move fetch.credentialsInUrl to
"transfer" config namespace, 2022-06-15) propagates a typo from 6dcbdc0d66 (remote: create fetch.credentialsInUrl config, 2022-06-06),
where "other" is misspelled as "oher". Fix the typo accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Wed, 22 Jun 2022 07:46:22 +0000 (15:46 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git:
name-rev: prefix annotate-stdin with '--' in message
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
Jiang Xin [Sat, 18 Jun 2022 06:02:07 +0000 (14:02 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git: (22 commits)
Git 2.37-rc1
git-compat-util: allow root to access both SUDO_UID and root owned
i18n: fix mismatched camelCase config variables
Another batch of fixes before -rc1
bug_fl(): correctly initialize trace2 va_list
relative_url(): fix incorrect condition
pack-mtimes: avoid closing a bogus file descriptor
read_index_from(): avoid memory leak
submodule--helper: avoid memory leak when fetching submodules
submodule-config: avoid memory leak
fsmonitor: avoid memory leak in `fsm_settings__get_incompatible_msg()`
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
perf-lib: fix missing test titles in output
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
...
Junio C Hamano [Sat, 18 Jun 2022 00:12:31 +0000 (17:12 -0700)]
Merge branch 'cb/path-owner-check-with-sudo-plus'
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
git-compat-util: allow root to access both SUDO_UID and root owned
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 17 Jun 2022 10:03:09 +0000 (18:03 +0800)]
i18n: fix mismatched camelCase config variables
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Junio C Hamano [Fri, 17 Jun 2022 17:33:32 +0000 (10:33 -0700)]
Merge branch 'js/ci-github-workflow-markup'
Recent CI update hides certain failures in test jobs, which has
been corrected.
* js/ci-github-workflow-markup:
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
ci(github): bring back the 'print test failures' step
Jeff King [Thu, 16 Jun 2022 20:04:25 +0000 (16:04 -0400)]
bug_fl(): correctly initialize trace2 va_list
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 63e95beb085c (submodule: port resolve_relative_url from shell to C,
2016-04-15), we added a loop over `url` where we are looking for `../`
or `./` components.
The loop condition we used is the pointer `url` itself, which is clearly
not what we wanted.
Pointed out by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-mtimes: avoid closing a bogus file descriptor
In 94cd775a6c52 (pack-mtimes: support reading .mtimes files,
2022-05-20), code was added to close the file descriptor corresponding
to the mtimes file.
However, it is possible that opening that file failed, in which case we
are closing a file descriptor with the value `-1`. Let's guard that
`close()` call.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 998330ac2e7c (read-cache: look for shared index files next to the
index, too, 2021-08-26), we added code that allocates memory to store
the base path of a shared index, but we never released that memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: avoid memory leak when fetching submodules
In c51f8f94e5b3 (submodule--helper: run update procedures from C,
2021-08-24), we added code that first obtains the default remote, and
then adds that to a `strvec`.
However, we never released the default remote's memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 961b130d20c9 (branch: add --recurse-submodules option for branch
creation, 2022-01-28), a funny pattern was introduced where first some
struct is `xmalloc()`ed, then we resize an array whose element type is
the same struct, and then the first struct's contents are copied into
the last element of that array.
Crucially, the `xmalloc()`ed memory never gets released.
Let's avoid that memory leak and that memory allocation dance altogether
by first reallocating the array, then using a pointer to the last array
element to go forward.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:50 +0000 (13:13 +0000)]
cache-tree: remove cache_tree_find_path()
This reverts 080ab56a46 (cache-tree: implement cache_tree_find_path(),
2022-05-23). The cache_tree_find_path() method was never actually called
in the topic that added it. I cannot find any reference to it in any of
my forks, so this appears to not be needed at the moment.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:49 +0000 (13:13 +0000)]
pack-write: drop always-NULL parameter
write_mtimes_file() takes an mtimes parameter as its first option, but
the only caller passes a NULL constant. Drop this parameter to simplify
logic. This can be reverted if that parameter is needed in the future.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:48 +0000 (13:13 +0000)]
t5329: test 'git gc --cruft' without '--prune=now'
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:47 +0000 (13:13 +0000)]
t2107: test 'git update-index --verbose'
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 16 Jun 2022 07:09:32 +0000 (03:09 -0400)]
perf-lib: fix missing test titles in output
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Thu, 16 Jun 2022 14:39:06 +0000 (08:39 -0600)]
l10n: es: update translation
* fix more translation mistakes
* consistently translate "amend" as "enmendar"
* consistently translate "chunk" as "fragmento"
* consistently translate "prune" as "recortar" or "recorte"
* consistently translate "push" as "empujar" or "empuje"
* consistently translate "rephrase" as "refrasear" or "refraseo"
* consistently translate "squash" as "aplastar" or "aplastamiento"
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Junio C Hamano [Wed, 15 Jun 2022 22:09:28 +0000 (15:09 -0700)]
Merge branch 'po/rebase-preserve-merges'
Various error messages that talk about the removal of
"--preserve-merges" in "rebase" have been strengthened, and "rebase
--abort" learned to get out of a state that was left by an earlier
use of the option.
* po/rebase-preserve-merges:
rebase: translate a die(preserve-merges) message
rebase: note `preserve` merges may be a pull config option
rebase: help users when dying with `preserve-merges`
rebase.c: state preserve-merges has been removed
Junio C Hamano [Wed, 15 Jun 2022 22:09:27 +0000 (15:09 -0700)]
Merge branch 'jc/revert-show-parent-info'
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
tests: add LIBCURL prerequisite to tests needing libcurl
Add and use a LIBCURL prerequisite for tests added in 6dcbdc0d661 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789a (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d661 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Amend the documentation and release notes entry for the
"fetch.credentialsInUrl" feature added in 6dcbdc0d661 (remote: create
fetch.credentialsInUrl config, 2022-06-06), it currently doesn't
detect passwords in `remote.<name>.pushurl` configuration. We
shouldn't lull users into a false sense of security, so we need to
mention that prominently.
This also elaborates and clarifies the "exposes the password in
multiple ways" part of the documentation. As noted in [1] a user
unfamiliar with git's implementation won't know what to make of that
scary claim, e.g. git hypothetically have novel git-specific ways of
exposing configured credentials.
The reality is that this configuration is intended as an aid for users
who can't fully trust their OS's or system's security model, so lets
say that's what this is intended for, and mention the most common ways
passwords stored in configuration might inadvertently get exposed.
add -i tests: mark "TODO" depending on GIT_TEST_ADD_I_USE_BUILTIN
Fix an issue that existed before 0527ccb1b55 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc87 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0c (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b55 with a
new "ADD_I_USE_BUILTIN" prerequisite.
Junio C Hamano [Mon, 13 Jun 2022 22:53:41 +0000 (15:53 -0700)]
Merge branch 'ab/hooks-regression-fix'
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
Junio C Hamano [Mon, 13 Jun 2022 22:53:41 +0000 (15:53 -0700)]
Merge branch 'pb/range-diff-with-submodule'
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
projects / thirdparty / git.git / log
