John Crispin [Fri, 24 Jul 2015 09:09:27 +0000 (09:09 +0000)]
ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.
Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).
John Crispin [Fri, 24 Jul 2015 09:09:22 +0000 (09:09 +0000)]
ramips: add support for STORYLiNK SAP-G3200U3
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs
Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)
More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46454
Felix Fietkau [Sun, 19 Jul 2015 14:59:26 +0000 (14:59 +0000)]
mkimage: cross compile fix: pass HOST_*FLAGS in to uboot's makefile
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build. Setting these flags is frequently required for unusual
cross-compiles.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
SVN-Revision: 46424
Felix Fietkau [Sun, 19 Jul 2015 14:59:09 +0000 (14:59 +0000)]
strace: cross compile fix: pass HOST_*FLAGS in to ./configure
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build. Setting these flags is frequently required for unusual
cross-compiles.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
SVN-Revision: 46422
John Crispin [Sat, 18 Jul 2015 21:15:42 +0000 (21:15 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working
on these devices. This adds them to the calibration data loading introduced in
r46244 and thus makes 5GHz work again for these devices.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46415
Jonas Gorski [Thu, 16 Jul 2015 11:12:52 +0000 (11:12 +0000)]
image.mk: add a BuildDTB define
Add a Image/BuildDTB command that takes the path to an dts file and
applies the CPP using the default include directories, then uses dtc
to compile the dts as the specified output file.
Additional CPP and DTC flags can be supplied as additional arguments.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46389
Felix Fietkau [Wed, 15 Jul 2015 08:17:28 +0000 (08:17 +0000)]
ar8216: add ARL table flushing per port
Adds functions for flushing ARL table entries per port.
Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316
is based on the AR8236 datasheet and assumes that the three chips
share a common ATU register layout.
Compile-tested only for AR8216/AR8236/AR8316.
scripts/feeds: return error status from feed update
This patch is a modified version of the patch being discussed at here:
https://patchwork.ozlabs.org/patch/471303/
from Martin Strbacka <martin.strbacka@nic.cz>
My version modifies scripts/feeds so that an error with one of the feeds just
raises the error flag, but script continues and tries to update the other
feeds. After all feeds have been updated, the script returns 1 if at least
one feed failed, and 0 on success with all feeds. The user can then utilise
the status in his build script, if he wants.
This controls the old Broadcom switch driver which was removed over a
year ago, since then this is useless. Use swconfig instead it works
with more (Broadcom) switches.
All modules should be build by a package and only selected by such a
package. Remove all the config options selected as module and also
refresh the config.
John Crispin [Tue, 14 Jul 2015 16:24:02 +0000 (16:24 +0000)]
x86: add kmod-acpi-button and kmod-button-hotplug to default packages
Since r40909 openwrt can automatically shutdown when you press the
power button or try to shutdown a kvm virtual machine.
When booting a recent CC-rc2 or trunk image, it doesn't work,
as two kernel modules are missing.
Add these two kernel modules to the default packages, so users
don't need to install them manually.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 46366
Felix Fietkau [Tue, 14 Jul 2015 10:30:38 +0000 (10:30 +0000)]
ccache: Make ccache aware of OpenWRT provided GCC patch.
The OpenWRT GCC patch, 910-mbsd_multi.patch adds an extra option
to gcc that depends on an environment variable. Standard ccache
is unaware of this option and therefor can produce stdout from gcc
that doesn't correspond to what you would get if you actually
do a direct compilation with gcc.
This commit adds a patch to ccache to make it aware of the new
option and removes the feature from the ccache package to use the
host system's installed ccache binary.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
SVN-Revision: 46364
John Crispin [Tue, 14 Jul 2015 09:57:19 +0000 (09:57 +0000)]
ipkg-build: use deterministic timestamps in ipk tarballs
As a follow-up to r46026, this commit sets the modification
times of files inside the tarballs to deterministic values.
It uses the date of the last git or svn commit and falls
back to the old behavior if those are not available.
John Crispin [Tue, 14 Jul 2015 09:57:08 +0000 (09:57 +0000)]
ramips: added gpio spi refclk support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46359
Steven Barth [Tue, 14 Jul 2015 09:12:29 +0000 (09:12 +0000)]
odhcpd: unsolicited unicast RAs + fix NDP-relay
odhcpd now sends unsolicited RAs also via unicast to known link-local
neighbors. This is an attempt to work-around common smartphone issues
https://code.google.com/p/android/issues/detail?id=32662
Also NDP-relay should now work more reliably now
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46357
John Crispin [Tue, 14 Jul 2015 07:41:19 +0000 (07:41 +0000)]
ramips: added led support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46350
John Crispin [Tue, 14 Jul 2015 07:40:22 +0000 (07:40 +0000)]
ramips: adding support for OY-0001 Wireless Router
Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng <2579131212@qq.com>
SVN-Revision: 46349
John Crispin [Tue, 14 Jul 2015 07:39:10 +0000 (07:39 +0000)]
brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.
Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46347
projects / thirdparty / openwrt.git / log
