Simon Trimmer [Tue, 27 Jan 2026 17:34:47 +0000 (17:34 +0000)]
ASoC: amd: acp: Rename Cirrus Logic component match entries to include link and uid
In preparation for having similar matches with multiple UIDs on the same
bus rename the match entries to include the bus link and device uid
numbers in their name using the lNuN convention.
Simon Trimmer [Tue, 27 Jan 2026 17:34:46 +0000 (17:34 +0000)]
ASoC: amd: acp: Sort match table into most specific first
Match tables should be sorted so that more complex combinations of
device matches are before simpler combinations, with the single device
matches at the end.
Chen Ni [Fri, 30 Jan 2026 09:19:04 +0000 (17:19 +0800)]
ASoC: codecs: max98390: Check return value of devm_gpiod_get_optional() in max98390_i2c_probe()
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Mark Brown [Thu, 29 Jan 2026 00:24:43 +0000 (00:24 +0000)]
regmap: reg_default_cb for flat cache defaults
Merge series from "Sheetal ." <sheetal@nvidia.com>:
This series adds a reg_default_cb callback for REGCACHE_FLAT to provide
defaults for registers not listed in reg_defaults. Defaults are loaded
eagerly during regcache init and the callback can use writeable_reg to
filter valid addresses and avoid holes.
Tegra ASoC drivers set reg_default_cb and add writeable_reg filtering for
AHUB RX holes to prevent invalid addresses from being marked valid.
Sheetal [Fri, 23 Jan 2026 09:53:45 +0000 (15:23 +0530)]
ASoC: tegra: set reg_default_cb callback
Set reg_default_cb so REGCACHE_FLAT can supply zero defaults without
large reg_defaults tables, simplifying cache initialization for
zero-reset registers.
Sheetal [Fri, 23 Jan 2026 09:53:43 +0000 (15:23 +0530)]
ASoC: tegra: Add AHUB writeable_reg for RX holes
Add writeable_reg callbacks for Tegra210/186 AHUB RX registers so the
flat cache only treats valid RX locations as writable, avoiding holes
in the register map.
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver") Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://patch.msgid.link/20260123095346.1258556-2-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Wed, 28 Jan 2026 02:59:55 +0000 (10:59 +0800)]
ASoC: wm8962: add .set_tdm_slot callback function
The slot_width can be different with the params_width(), for example,
DSP_A mode, slot_width = 32, but data format is S16_LE, if the word
length is configured to be 16, there is no sound on the right speaker.
So add .set_tdm_slot() callback function to configure the slot_width and
update the word length according to slot_width in hw_params().
Mark Brown [Wed, 28 Jan 2026 01:22:16 +0000 (01:22 +0000)]
ASoC: sophgo: add CV1800 I2S controllers support
Merge series from "Anton D. Stavinskii" <stavinsky@gmail.com>:
This patch series adds basic audio support for Sophgo CV1800B,
as used on boards such as the Milk-V Duo.
The series introduces the I2S controller driver,
the DAC and ADC codec drivers, corresponding DT bindings,
and DTS updates to wire the components together.
The implementation is based on vendor documentation
and testing on real hardware. This series relies on
recent fixes in the DesignWare AXI DMA support;
in particular, correct operation depends on
the DMA changes discussed at:
https://lore.kernel.org/all/20251214224601.598358-1-inochiama@gmail.com/
The current driver implementation supports a fixed audio configuration
of 48 kHz sample rate and only I2S protocol which is used in codecs.
The series has been tested on the Milk-V Duo 256M board using
the Sophgo SG2002 SoC. The implementation is expected to also work on
Milk-V Duo and Milk-V Module boards based on the SG2000 SoC,
as the audio and DMA blocks are closely related.
Known hardware limitation:
On CV1800B / SG2002, the I2S2 output pins cannot be enabled via
pinctrl alone. Due to SoC design constraints, the output path becomes
functional only after additional vendor-specific register programming.
This series makes the limitation explicit and does not attempt
to work around it implicitly via pinctrl or undocumented behavior.
Mark Brown [Wed, 28 Jan 2026 00:37:54 +0000 (00:37 +0000)]
ASoC: capsuling struct snd_soc_dapm_context
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Now, all DAPM users are using function to handling it.
We can capsuling it. This patchset moves struct snd_soc_dapm_context into
soc-dapm.c, and remove un-used functions.
Mark Brown [Wed, 28 Jan 2026 00:37:49 +0000 (00:37 +0000)]
ASoC: codec: Remove ak4641/pxa2xx-ac97 and convert to
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
Codec DAI endpoint for TXDAC. The codec does only a few things
- set up decimation
- enable codec and I2S output
- ensures the driver doesn't have dac overwrite enabled. (unmute the
output)
Codec DAI endpoint for RXADC + basic controls.
THe codec have basic volume control. Which is
imlemented by lookup table for simplicity.
The codec expects set_sysclk callback to
adjust internal mclk divider.
The actual CPU DAI controller. The driver can be used with
simple-audio-card. It respects fixed clock configuration
from simple-audio-card. The card driver can request direction out,
this will be interpreted as mclk out, the clock which can be used
in other CPU or codecs. For example I2S3 generates clock for ADC.
I2S was tested in S24_32 and S16 dual channel formats.
There are 4 TDM controllers on the SoC. Each controller can receive or
transmit data over DMA. The dma it self has 8 channels.
Each channel can be connected only to a specific i2s node. But each
of dma channel can have multiple purposes so in order to save dma
channels the configurations allows to use tx and rx, only rx, only tx
or none channels. I2S controller without channels can be useful in
configuration where I2S is used as clock source only and doesn't
produce any data.
Sheetal [Fri, 23 Jan 2026 09:53:46 +0000 (15:23 +0530)]
regmap: add KUnit coverage for reg_default_cb callback
Add a flat-cache KUnit test that verifies reg_defaults are honored while
missing entries are populated via the reg_default_cb callback without
hardware reads. This exercises the new callback path added for
REGCACHE_FLAT defaults.
Sheetal [Fri, 23 Jan 2026 09:53:44 +0000 (15:23 +0530)]
regmap: Add reg_default_cb callback for flat cache defaults
Commit e062bdfdd6ad ("regmap: warn users about uninitialized flat cache")
warns when REGCACHE_FLAT is used without full defaults. This causes
false positives on hardware where many registers reset to zero but are
not listed in reg_defaults, forcing drivers to maintain large tables
just to silence the warning.
Add a reg_default_cb() hook so drivers can supply defaults for registers
not present in reg_defaults when populating REGCACHE_FLAT. This keeps
the warning quiet for known zero-reset registers without bloating
tables. Provide a generic regmap_default_zero_cb() helper for drivers
that need zero defaults.
The hook is only used for REGCACHE_FLAT; the core does not
check readable/writeable access, so drivers must provide readable_reg/
writeable_reg callbacks and handle holes in the register map.
Peng Fan [Thu, 22 Jan 2026 12:44:59 +0000 (20:44 +0800)]
ASoC: pxa2xx-ac97: Remove platform_data
Since commit d6df7df7ae5a0 ("ARM: pxa: remove unused board files"), there
has been no in-tree user to create the device with platform data. So remove
them.
Peng Fan [Thu, 22 Jan 2026 12:44:58 +0000 (20:44 +0800)]
ASoC: codec: Remove pxa2xx-ac97.c
With commit ce79f3a1ad5f ("ARM: pxa: prune unused device support") and
commit 2548e6c76ebf ("ARM: pxa: pxa2xx-ac97-lib: use IRQ resource"), there
is no 'pxa2xx-ac97' platform device created by machine level code, so this
driver could be removed.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://patch.msgid.link/20260122-sound-cleanup-v1-2-0a91901609b8@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peng Fan [Thu, 22 Jan 2026 12:44:57 +0000 (20:44 +0800)]
ASoC: codec: Remove ak4641
Since commit d6df7df7ae5a0 ("ARM: pxa: remove unused board files"), there
has been no in-tree user of the AK4641 codec driver. The last user
(HP iPAQ hx4700) was a non-DT PXA board file that instantiated the device
via I2C board data; that code was removed as part of the PXA board-file
purge.
The AK4641 driver was introduced ~2011 and still probes only via the I2C
device-ID table ('.id_table'), without an 'of_match_table', so there are
no upstream Devicetree users to retain. With no in-tree users left, remove
the driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://patch.msgid.link/20260122-sound-cleanup-v1-1-0a91901609b8@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: fsl,mqs: make gpr optional for SM-based SoCs
For SM-based SoCs (i.e. MX95, MX943), GPR configuration is performed by
the SM coprocessor. Thus, GPR is transparent to the software and does not
need to be described in the devicetree. Make it optional.
Andy Shevchenko [Sat, 24 Jan 2026 10:17:03 +0000 (11:17 +0100)]
ASoC: codecs: rt1320-sdw: Refactor to reduce stack frames
Compiler is not happy about used stack frames in a couple of functions:
sound/soc/codecs/rt1320-sdw.c: In function 'rt1320_rae_load':
sound/soc/codecs/rt1320-sdw.c:1570:1: error: the frame size of 1336 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
sound/soc/codecs/rt1320-sdw.c: In function 'rt1320_dspfw_load_code':
sound/soc/codecs/rt1320-sdw.c:1786:1: error: the frame size of 1520 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Shengjiu Wang [Fri, 23 Jan 2026 08:25:01 +0000 (16:25 +0800)]
ASoC: fsl_sai: Add AUDMIX mode support on i.MX952
One of SAI interfaces is connected to AUDMIX in the i.MX952 chip, but
AUDMIX can be bypassed or not bypassed on the i.MX952 platform.
There are three use cases:
1) SAI -> Codec (No AUDMIX between SAI and Codec)
2) SAI -> Codec (Has AUDMIX, but AUDMIX is bypassed)
3) SAI -> AUDMIX -> Codec (Has AUDMIX and used)
So add 'fsl,sai-amix-mode' property for this feature
fsl,sai-amix-mode = "none": is for case 1)
fsl,sai-amix-mode = "bypass": is for case 2)
fsl,sai-amix-mode = "audmix": is for case 3)
Shengjiu Wang [Fri, 23 Jan 2026 08:24:58 +0000 (16:24 +0800)]
ASoC: dt-bindings: fsl,audmix: Add support for i.MX952 platform
Add a compatible string for i.MX952 platform.
There is a power domain on i.MX952 for the mix system of AUDMIX.
But it is enabled by default, AUDMIX device don't need to enable it,
so make the power-domains to be optional on i.MX952, and be required on
i.MX8QM.
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current card/component are using dapm_context instance. But it will be
moved to soc-dapm.c, and we can use will be only pointer. Makes it to
pointer.
Linus Torvalds [Sun, 25 Jan 2026 20:06:15 +0000 (12:06 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Linus Torvalds [Sun, 25 Jan 2026 18:06:23 +0000 (10:06 -0800)]
Merge tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Linus Torvalds [Sun, 25 Jan 2026 17:57:31 +0000 (09:57 -0800)]
Merge tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Linus Torvalds [Sun, 25 Jan 2026 17:53:28 +0000 (09:53 -0800)]
Merge tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
Linus Torvalds [Sun, 25 Jan 2026 17:42:25 +0000 (09:42 -0800)]
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
Srish Srinivasan [Fri, 23 Jan 2026 16:55:03 +0000 (22:25 +0530)]
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size") Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
gongqi [Thu, 22 Jan 2026 15:54:59 +0000 (23:54 +0800)]
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
feng [Sun, 25 Jan 2026 05:44:12 +0000 (21:44 -0800)]
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Linus Torvalds [Sun, 25 Jan 2026 02:55:48 +0000 (18:55 -0800)]
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Linus Torvalds [Sun, 25 Jan 2026 01:18:57 +0000 (17:18 -0800)]
Merge tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Dan Williams [Sat, 24 Jan 2026 01:22:56 +0000 (17:22 -0800)]
Documentation: Project continuity
Document project continuity procedures. This is a plan for a plan for
navigating events that affect the forward progress of the canonical
Linux repository, torvalds/linux.git.
It is a follow-up from Maintainer Summit [1].
Co-developed-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lwn.net/Articles/1050179/ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 24 Jan 2026 18:13:22 +0000 (10:13 -0800)]
Merge tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
Linus Torvalds [Sat, 24 Jan 2026 17:36:03 +0000 (09:36 -0800)]
Merge tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix auxiliary timekeeper update & locking bug
- Reduce the sensitivity of the clocksource watchdog,
to fix false positive measurements that marked the
TSC clocksource unstable
* tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Reduce watchdog readout delay limit to prevent false positives
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
Linus Torvalds [Sat, 24 Jan 2026 17:24:17 +0000 (09:24 -0800)]
Merge tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
Linus Torvalds [Sat, 24 Jan 2026 17:02:56 +0000 (09:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
Linus Torvalds [Fri, 23 Jan 2026 22:58:51 +0000 (14:58 -0800)]
Merge tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
Linus Torvalds [Fri, 23 Jan 2026 21:56:04 +0000 (13:56 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A set of fixes for FPSIMD/SVE/SME state management (around signal
handling and ptrace) where a task can be placed in an invalid state
- __nocfi added to swsusp_arch_resume() to avoid a data abort on
resuming from hibernate
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Set __nocfi on swsusp_arch_resume()
arm64/fpsimd: signal: Fix restoration of SVE context
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
Linus Torvalds [Fri, 23 Jan 2026 21:40:55 +0000 (13:40 -0800)]
Merge tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use the original nents value for ib_dma_unmap_sg(), preventing
potential memory corruption in the RDMA transport layer
- Fix a naming discrepancy in the kernel-doc for
ksmbd_vfs_kern_path_start_removing() as identified by sparse static
analysis
- Reset smb_direct_port to its default value during initialization to
ensure the correct port is used when switching between different RDMA
device types without module reload
* tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd:
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
smb: server: fix comment for ksmbd_vfs_kern_path_start_removing()
ksmbd: smbd: fix dma_unmap_sg() nents
Linus Torvalds [Fri, 23 Jan 2026 21:20:24 +0000 (13:20 -0800)]
Merge tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix the pci_do_resource_release_and_resize() failure path, which
clobbered the intended failure return value (Ilpo Järvinen)
- Restore resizable BAR size before value because the size determines
which bits are writable; this fixes i915 and xe regressions (Ilpo
Järvinen)
* tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix Resizable BAR restore order
PCI: Fix BAR resize rollback path overwriting ret
* tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: acer-wmi: Fix missing capability check
platform/x86: acer-wmi: Extend support for Acer Nitro AN515-58
platform/x86: asus-armoury: add support for GA403WW
platform/x86: asus-armoury: keep the list ordered alphabetically
platform/x86: asus-armoury: add support for G835L
platform/x86: asus-armoury: fix ppt data for FA608UM
platform/x86: hp-bioscfg: Fix automatic module loading
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
platform/x86: asus-wmi: fix sending OOBE at probe
platform/x86: asus-armoury: add support for FA617XT
platform/x86: asus-armoury: add support for FA401UV
platform/x86: asus-armoury: add support for GV302XV
platform/x86: asus-armoury: Add power limits for Asus G513QY
platform/x86/amd: Fix memory leak in wbrf_record()
platform/mellanox: Fix SN5640/SN5610 LED platform data
docs: fix PPR for AMD EPYC broken link
docs: alienware-wmi: fix typo
platform/x86: asus-armoury: add support for GA403UV
asus-armoury: fix ppt data for GA403U* renaming to GA403UI
...
Linus Torvalds [Fri, 23 Jan 2026 21:12:49 +0000 (13:12 -0800)]
Merge tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove incorrect reset/clock mask for 8mq vpu
- rockchip: Fix initial state of PM domain
* tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain:rockchip: Fix init genpd as GENPD_STATE_ON before regulator ready
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
Linus Torvalds [Fri, 23 Jan 2026 20:53:56 +0000 (12:53 -0800)]
Merge tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
Linus Torvalds [Fri, 23 Jan 2026 20:51:00 +0000 (12:51 -0800)]
Merge tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a potential leak of an iovec, if a specific cleanup path is
used and the rw_cache is full at the time of the call
- Fix for a regression added in this cycle, where waitid should be
using prober release/acquire semantics for updating the wait queue
head
- Check for the cancelation bit being set for every work item processed
by io-wq, not just at the start of the loop. Has no real practical
implications other than to shut up syzbot doing crazy things that
grossly overload a system, hence slowing down ring exit
- A few selftest additions, updating the mini_liburing that selftests
use
* tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
selftests/io_uring: support NO_SQARRAY in miniliburing
selftests/io_uring: add io_uring_queue_init_params
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
io_uring/waitid: fix KCSAN warning on io_waitid->head
io_uring/rw: free potentially allocated iovec on cache put failure
Linus Torvalds [Fri, 23 Jan 2026 20:46:12 +0000 (12:46 -0800)]
Merge tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU: Fix potential NULL-ptr dereference in error path
of amd_iommu_probe_device()
- Generic IOMMUPT: Fix another compiler issue seen with older
compiler versions
- Fix signedness issue in ARM IO-PageTable code
* tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
iommupt: Make it clearer to the compiler that pts.level == 0 for single page
iommu/amd: Fix error path in amd_iommu_probe_device()
Weigang He [Mon, 19 Jan 2026 11:45:42 +0000 (11:45 +0000)]
scripts/tracepoint-update: Fix memory leak in add_string() on failure
When realloc() fails in add_string(), the function returns -1 but leaves
*vals pointing to the previously allocated memory. This can cause memory
leaks in callers like make_trace_array() that return on error without
freeing the partially built array.
Fix this by freeing *vals and setting it to NULL when realloc() fails.
This makes the error handling self-contained in add_string() so callers
don't need to handle cleanup on failure.
This bug is found by my static analysis tool and my code review.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: e30f8e61e2518 ("tracing: Add a tracepoint verification check at build time") Link: https://patch.msgid.link/20260119114542.1714405-1-geoffreyhe2@gmail.com Signed-off-by: Weigang He <geoffreyhe2@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Donglin Peng [Mon, 12 Jan 2026 02:16:01 +0000 (10:16 +0800)]
function_graph: Fix args pointer mismatch in print_graph_retval()
When funcgraph-args and funcgraph-retaddr are both enabled, many kernel
functions display invalid parameters in trace logs.
The issue occurs because print_graph_retval() passes a mismatched args
pointer to print_function_args(). Fix this by retrieving the correct
args pointer using the FGRAPH_ENTRY_ARGS() macro.
Link: https://patch.msgid.link/20260112021601.1300479-1-dolinux.peng@gmail.com Fixes: f83ac7544fbf ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Ian Rogers [Thu, 8 Jan 2026 00:26:25 +0000 (16:26 -0800)]
tracing: Avoid possible signed 64-bit truncation
64-bit truncation to 32-bit can result in the sign of the truncated
value changing. The cmp_mod_entry is used in bsearch and so the
truncation could result in an invalid search order. This would only
happen were the addresses more than 2GB apart and so unlikely, but
let's fix the potentially broken compare anyway.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260108002625.333331-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Fri, 23 Jan 2026 00:48:24 +0000 (19:48 -0500)]
tracing: Fix crash on synthetic stacktrace field usage
When creating a synthetic event based on an existing synthetic event that
had a stacktrace field and the new synthetic event used that field a
kernel crash occurred:
~# cd /sys/kernel/tracing
~# echo 's:stack unsigned long stack[];' > dynamic_events
~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger
~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger
The above creates a synthetic event that takes a stacktrace when a task
schedules out in a non-running state and passes that stacktrace to the
sched_switch event when that task schedules back in. It triggers the
"stack" synthetic event that has a stacktrace as its field (called "stack").
The above makes another synthetic event called "syscall_stack" that
attaches the first synthetic event (stack) to the sys_exit trace event and
records the stacktrace from the stack event with the id of the system call
that is exiting.
When enabling this event (or using it in a historgram):
The reason is that the stacktrace field is not labeled as such, and is
treated as a normal field and not as a dynamic event that it is.
In trace_event_raw_event_synth() the event is field is still treated as a
dynamic array, but the retrieval of the data is considered a normal field,
and the reference is just the meta data:
// Meta data is retrieved instead of a dynamic array
str_val = (char *)(long)var_ref_vals[val_idx];
// Then when it tries to process it:
len = *((unsigned long *)str_val) + 1;
It triggers a kernel page fault.
To fix this, first when defining the fields of the first synthetic event,
set the filter type to FILTER_STACKTRACE. This is used later by the second
synthetic event to know that this field is a stacktrace. When creating
the field of the new synthetic event, have it use this FILTER_STACKTRACE
to know to create a stacktrace field to copy the stacktrace into.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Link: https://patch.msgid.link/20260122194824.6905a38e@gandalf.local.home Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Fri, 23 Jan 2026 18:20:28 +0000 (10:20 -0800)]
Merge tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One new device ID, plus a few fixes.
The most substantial of the fixes is for the Cadence driver which in
at least some instantiations requires transmit data to drive data
through the IP"
* tag 'spi-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel-pci: Add support for Nova Lake SPI serial flash
spi: spi-cadence: enable SPI_CONTROLLER_MUST_TX
spi: hisi-kunpeng: Fixed the wrong debugfs node name in hisi_spi debugfs initialization
spi: spi-sprd-adi: Fix double free in probe error path
Linus Torvalds [Fri, 23 Jan 2026 18:17:06 +0000 (10:17 -0800)]
Merge tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, one error handling one and another for misuse
of the hwspinlock API"
* tag 'regmap-fix-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix race condition in hwspinlock irqsave routine
regmap: maple: free entry on mas_store_gfp() failure
Linus Torvalds [Fri, 23 Jan 2026 18:14:52 +0000 (10:14 -0800)]
Merge tag 'gpio-fixes-for-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some fixes to resource leaks in the character device handling and
another small fix for shared GPIO management:
- fix resource leaks in error paths in GPIO character device code
- return -ENOMEM and not -ENODEV on memory allocation failure
- fix an audio issue on Qualcomm platforms due to configuration not
being propagated to pinctrl from shared GPIO proxy"
* tag 'gpio-fixes-for-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: propagate configuration to pinctrl
gpio: cdev: Fix resource leaks on errors in gpiolib_cdev_register()
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
gpio: cdev: Correct return code on memory allocation failure
Zhaoyang Huang [Thu, 22 Jan 2026 11:49:25 +0000 (19:49 +0800)]
arm64: Set __nocfi on swsusp_arch_resume()
A DABT is reported[1] on an android based system when resume from hiberate.
This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*()
and does not have a CFI hash, but swsusp_arch_resume() will attempt to
verify the CFI hash when calling a copy of swsusp_arch_suspend_exit().
Given that there's an existing requirement that the entrypoint to
swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text
section, we cannot fix this by marking swsusp_arch_suspend_exit() with
SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in
swsusp_arch_resume().
Mark swsusp_arch_resume() as __nocfi to disable the CFI check.
Linus Torvalds [Fri, 23 Jan 2026 17:37:35 +0000 (09:37 -0800)]
Merge tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few more small fixes for HD- and USB-audio,
including a regression fix for the OOB fix that was included
in the previous pull request"
* tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Book 9i 13IRU8 audio
ALSA: hda/realtek: Add quirk for Samsung 730QED to fix headphone
ALSA: usb-audio: Use the right limit for PCM OOB check
ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free()
ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU
ALSA: ctxfi: Fix potential OOB access in audio mixer handling
selftests: ALSA: Remove unused variable in utimer-test
ALSA: usb-audio: Add delay quirk for MOONDROP Moonriver2 Ti
ALSA: scarlett2: Fix buffer overflow in config retrieval
ALSA: usb: Increase volume range that triggers a warning
Linus Torvalds [Fri, 23 Jan 2026 17:01:26 +0000 (09:01 -0800)]
Merge tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Probably a good thing you decided to do an rc8 in this round. Nothing
stands out, but xe/amdgpu and mediatek all have a bunch of fixes, and
then there are a few other single patches. Hopefully next week is
calmer for release.
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace
is available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve
unknown connector handling
- Set missing atomic function ops
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'"
* tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
Revert "drm/amd/display: pause the workload setting in dm"
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
drm/i915/display: Fix color pipeline enum name leak
drm/vkms: Fix color pipeline enum name leak
drm/amd/display: Fix color pipeline enum name leak
drm/i915/color: Place 3D LUT after CSC in plane color pipeline
drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)
drm/nouveau: implement missing DCB connector types; gracefully handle unknown connectors
drm/nouveau: add missing DCB connector types
drm/amdgpu: fix type for wptr in ring backup
drm/amdgpu: Fix validating flush_gpu_tlb_pasid()
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
drm/amd/pm: Don't clear SI SMC table when setting power limit
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
drm/xe: Update wedged.mode only after successful reset policy change
drm/xe/migrate: fix job lock assert
drm/xe/uapi: disallow bind queue sharing
drm/amd/display: Only poll analog connectors
drm/amdgpu: fix error handling in ib_schedule()
...
Revert commit bfc467db60b7 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d78 ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Syed Saba Kareem [Fri, 23 Jan 2026 09:55:04 +0000 (15:25 +0530)]
ASoC: amd: acp: Fix Kconfig dependencies for SND_SOC_ACPI_AMD_SDCA_QUIRKS
Fix the following kconfig warning reported by the kernel test robot:
kismet: WARNING: unmet direct dependencies detected for
SND_SOC_ACPI_AMD_SDCA_QUIRKS when selected by SND_SOC_ACPI_AMD_MATCH
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] &&
ACPI [=y] && SND_SOC_SDCA [=n]
Selected by [y]:
- SND_SOC_ACPI_AMD_MATCH [=y] && SOUND [=y] && SND [=y] &&
SND_SOC [=y]
The issue occurs because SND_SOC_ACPI_AMD_SDCA_QUIRKS depends on
SND_SOC_SDCA, which may be disabled, causing unmet dependency warnings.
Fix this by adjusting the Kconfig dependency logic accordingly.
Fixes: e7c30ac379b4 ("ASoC: amd: acp: soc-acpi: add is_device_rt712_vb() helper") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601131155.RXGj4KHv-lkp@intel.com Signed-off-by: Syed Saba Kareem <syed.sabakareem@amd.com> Link: https://patch.msgid.link/20260123095524.490655-1-syed.sabakareem@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Cc: Oder Chiou <oder_chiou@realtek.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: linux-sound@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20260123113708.416727-13-bigeasy@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
Vincent Guittot [Fri, 23 Jan 2026 10:28:58 +0000 (11:28 +0100)]
sched/fair: Revert force wakeup preemption
This agressively bypasses run_to_parity and slice protection with the
assumpiton that this is what waker wants but there is no garantee that
the wakee will be the next to run. It is a better choice to use
yield_to_task or WF_SYNC in such case.
This increases the number of resched and preemption because a task becomes
quickly "ineligible" when it runs; We update the task vruntime periodically
and before the task exhausted its slice or at least quantum.
Example:
2 tasks A and B wake up simultaneously with lag = 0. Both are
eligible. Task A runs 1st and wakes up task C. Scheduler updates task
A's vruntime which becomes greater than average runtime as all others
have a lag == 0 and didn't run yet. Now task A is ineligible because
it received more runtime than the other task but it has not yet
exhausted its slice nor a min quantum. We force preemption, disable
protection but Task B will run 1st not task C.
Sidenote, DELAY_ZERO increases this effect by clearing positive lag at
wake up.
Mel Gorman [Tue, 20 Jan 2026 11:33:35 +0000 (11:33 +0000)]
sched/fair: Disable scheduler feature NEXT_BUDDY
NEXT_BUDDY was disabled with the introduction of EEVDF and enabled again
after NEXT_BUDDY was rewritten for EEVDF by commit e837456fdca8 ("sched/fair:
Reimplement NEXT_BUDDY to align with EEVDF goals"). It was not expected
that this would be a universal win without a crystal ball instruction
but the reported regressions are a concern [1][2] even if gains were
also reported. Specifically;
o mysql with client/server running on different servers regresses
o specjbb reports lower peak metrics
o daytrader regresses
The mysql is realistic and a concern. It needs to be confirmed if
specjbb is simply shifting the point where peak performance is measured
but still a concern. daytrader is considered to be representative of a
real workload.
Access to test machines is currently problematic for verifying any fix to
this problem. Disable NEXT_BUDDY for now by default until the root causes
are addressed.
Linus Torvalds [Fri, 23 Jan 2026 03:39:25 +0000 (19:39 -0800)]
Merge tag 'v6.19-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- Add assoclen check in authencesn
* tag 'v6.19-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
After commit bdce162f2e57 ("riscv: Use 64-bit variable for output in
__get_user_asm"), there is a warning when building for 32-bit RISC-V:
In file included from include/linux/uaccess.h:13,
from include/linux/sched/task.h:13,
from include/linux/sched/signal.h:9,
from include/linux/rcuwait.h:6,
from include/linux/mm.h:36,
from include/linux/migrate.h:5,
from mm/migrate.c:16:
mm/migrate.c: In function 'do_pages_move':
arch/riscv/include/asm/uaccess.h:115:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
115 | (x) = (__typeof__(x))__tmp; \
| ^
arch/riscv/include/asm/uaccess.h:198:17: note: in expansion of macro '__get_user_asm'
198 | __get_user_asm("lb", (x), __gu_ptr, label); \
| ^~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:218:9: note: in expansion of macro '__get_user_nocheck'
218 | __get_user_nocheck(x, ptr, __gu_failed); \
| ^~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:255:9: note: in expansion of macro '__get_user_error'
255 | __get_user_error(__gu_val, __gu_ptr, __gu_err); \
| ^~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:285:17: note: in expansion of macro '__get_user'
285 | __get_user((x), __p) : \
| ^~~~~~~~~~
mm/migrate.c:2358:29: note: in expansion of macro 'get_user'
2358 | if (get_user(p, pages + i))
| ^~~~~~~~
Add an intermediate cast to 'unsigned long', which is guaranteed to be the same
width as a pointer, before the cast to the type of the output variable to clear
up the warning.
Fixes: bdce162f2e57 ("riscv: Use 64-bit variable for output in __get_user_asm") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601210526.OT45dlOZ-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20260121-riscv-fix-int-to-pointer-cast-v1-1-b83eebe57c76@kernel.org Signed-off-by: Paul Walmsley <pjw@kernel.org>
Cedric Xing [Fri, 23 Jan 2026 00:39:15 +0000 (18:39 -0600)]
x86: make page fault handling disable interrupts properly
There's a big comment in the x86 do_page_fault() about our interrupt
disabling code:
* User address page fault handling might have reenabled
* interrupts. Fixing up all potential exit points of
* do_user_addr_fault() and its leaf functions is just not
* doable w/o creating an unholy mess or turning the code
* upside down.
but it turns out that comment is subtly wrong, and the code as a result
is also wrong.
Because it's certainly true that we may have re-enabled interrupts when
handling user page faults. And it's most certainly true that we don't
want to bother fixing up all the cases.
But what isn't true is that it's limited to user address page faults.
The confusion stems from the fact that we have logic here that depends
on the address range of the access, but other code then depends on the
_context_ the access was done in. The two are not related, even though
both of them are about user-vs-kernel.
In other words, both user and kernel addresses can cause interrupts to
have been enabled (eg when __bad_area_nosemaphore() gets called for user
accesses to kernel addresses). As a result we should make sure to
disable interrupts again regardless of the address range before
returning to the low-level fault handling code.
The __bad_area_nosemaphore() code actually did disable interrupts again
after enabling them, just not consistently. Ironically, as noted in the
original comment, fixing up all the cases is just not worth it, when the
simple solution is to just do it unconditionally in one single place.
So remove the incomplete case that unsuccessfully tried to do what the
comment said was "not doable" in commit ca4c6a9858c2 ("x86/traps: Make
interrupt enable/disable symmetric in C code"), and just make it do the
simple and straightforward thing.
Signed-off-by: Cedric Xing <cedric.xing@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
This allows testing with different devices (iwrap vs. non-iwarp) without
'rmmod ksmbd && modprobe ksmbd', but instead
'ksmbd.control -s && ksmbd.mountd' is enough.
In the long run we want to listen on iwarp and non-iwarp at the same time,
but requires more changes, most likely also in the rdma layer.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / thirdparty / kernel / linux.git / log
