Commit 7303a1475008 ("sctp: identify chunks that need to be fragmented
at IP level") made the chunk be fragmented at IP level in the next round
if it's size exceed PMTU.
But there still is another case, PMTU can be updated if transport's dst
expires and transport's pmtu_pending is set in sctp_packet_transmit. If
the new PMTU is less than the chunk, the same issue with that commit can
be triggered.
So we should drop this packet and let it retransmit in another round
where it would be fragmented at IP level.
This patch is to fix it by checking the chunk size after PMTU may be
updated and dropping this packet if it's size exceed PMTU.
Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of getsockopt handlers in net/sctp/socket.c check len against
sizeof some structure like:
if (len < sizeof(int))
return -EINVAL;
On the first look, the check seems to be correct. But since len is int
and sizeof returns size_t, int gets promoted to unsigned size_t too. So
the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is
false.
Fix this in sctp by explicitly checking len < 0 before any getsockopt
handler is called.
Note that sctp_getsockopt_events already handled the negative case.
Since we added the < 0 check elsewhere, this one can be removed.
Commit 3ac72b7b63d5 ("net: fec: align IP header in hardware") breaks
networking on mx28.
There is an erratum on mx28 (ENGR121613 - ENET big endian mode
not compatible with ARM little endian) that requires an additional
byte-swap operation to workaround this problem.
So call swap_buffer() prior to performing the IP header alignment
to restore network functionality on mx28.
Fixes: 3ac72b7b63d5 ("net: fec: align IP header in hardware") Reported-and-tested-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a681574c99be23e4d20b769bf0e543239c364af5
("ipv4: disable BH in set_ping_group_range()") because we never
read ping_group_range in BH context (unlike local_port_range).
Then, since we already have a lock for ping_group_range, those
using ip_local_ports.lock for ping_group_range are clearly typos.
We might consider to share a same lock for both ping_group_range
and local_port_range w.r.t. space saving, but that should be for
net-next.
Fixes: a681574c99be ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918ab234 ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 4ee3bd4a8c746 ("ipv4: disable BH when changing ip local port
range") Cong added BH protection in set_local_port_range() but missed
that same fix was needed in set_ping_group_range()
Fixes: b8f1a55639e6 ("udp: Add function to make source port for UDP tunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Eric Salo <salo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, GRO can do unlimited recursion through the gro_receive
handlers. This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem. Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.
This patch adds a recursion counter to the GRO layer to prevent stack
overflow. When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally. This recursion
counter is put in the GRO CB, but could be turned into a percpu counter
if we run out of space in the CB.
Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report.
Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that netdev_all_lower_get_next_rcu() never advances the
iterator, thereby causing the loop over the lower adjacency list to run
forever.
Fix this by advancing the iterator and avoid the infinite loop.
Fixes: 7ce856aaaf13 ("mlxsw: spectrum: Add couple of lower device helper functions") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The offload flag is a status flag and should not be used by
FIB semantics for comparison.
Fixes: 37ed9493699c ("rtnetlink: add RTNH_F_EXTERNAL flag for fib offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that the 8021q module propagates the call to
ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't
recognize the netdev, as it's not offloaded.
While we can ignore calls being made to non-bridge ports inside the
driver, a better fix would be to push this check up to the switchdev
layer.
Note that these ndos can be called for non-bridged netdev, but this only
happens in certain PF drivers which don't call the corresponding
switchdev functions anyway.
Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Satish reported a problem with the perm multicast router ports not getting
reenabled after some series of events, in particular if it happens that the
multicast snooping has been disabled and the port goes to disabled state
then it will be deleted from the router port list, but if it moves into
non-disabled state it will not be re-added because the mcast snooping is
still disabled, and enabling snooping later does nothing.
Here are the steps to reproduce, setup br0 with snooping enabled and eth1
added as a perm router (multicast_router = 2):
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
<empty>
At this point we have mcast enabled and eth1 as a perm router (value = 2)
but it is not in the router list which is incorrect.
After this change:
1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping
2. $ ip l set eth1 down
^ This step deletes the interface from the router list
3. $ ip l set eth1 up
^ This step does not add it again because mcast snooping is disabled
4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping
5. $ bridge -d -s mdb show
router ports on br0: eth1
Note: we can directly do br_multicast_enable_port for all because the
querier timer already has checks for the port state and will simply
expire if it's in blocking/disabled. See the comment added by
commit 9aa66382163e7 ("bridge: multicast: add a comment to
br_port_state_selection about blocking state")
Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After Jesper commit back in linux-3.18, we trigger a lockdep
splat in proc_create_data() while allocating memory from
pktgen_change_name().
This patch converts t->if_lock to a mutex, since it is now only
used from control path, and adds proper locking to pktgen_change_name()
1) pktgen_thread_lock to protect the outer loop (iterating threads)
2) t->if_lock to protect the inner loop (iterating devices)
Note that before Jesper patch, pktgen_change_name() was lacking proper
protection, but lockdep was not able to detect the problem.
Fixes: 8788370a1d4b ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()") Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cases where the number of tx rings is not a multiple of the number of
rx rings, the tx completion event will be handled on a different core
from the transmit and population of the ring. Races on the ring will
lead to a double-free of the page, and possibly other corruption.
The rings are initialized by default with a valid multiple of rings,
based on the number of cpus, therefore an invalid configuration requires
ethtool to change the ring layout. For instance 'ethtool -L eth0 rx 9 tx
8' will cause packets received on rx0, and XDP_TX'd to tx48, to be
completed on cpu3 (48 % 9 == 3).
Resolve this discrepancy by shifting the irq for the xdp tx queues to
start again from 0, modulo rx_ring_num.
Fixes: 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the commit 9207f9d45b0a ("net: preserve IP control block
during GSO segmentation"), the GSO CB and the IPoIB CB conflict.
That destroy the IPoIB address information cached there,
causing a severe performance regression, as better described here:
This change moves the data cached by the IPoIB driver from the
skb control lock into the IPoIB hard header, as done before
the commit 936d7de3d736 ("IPoIB: Stop lying about hard_header_len
and use skb->cb to stash LL addresses").
In order to avoid GRO issue, on packet reception, the IPoIB driver
stash into the skb a dummy pseudo header, so that the received
packets have actually a hard header matching the declared length.
To avoid changing the connected mode maximum mtu, the allocated
head buffer size is increased by the pseudo header length.
After this commit, IPoIB performances are back to pre-regression
value.
v2 -> v3: rebased
v1 -> v2: avoid changing the max mtu, increasing the head buf size
Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The goal of the patch is to fix this scenario:
ip link add dummy1 type dummy
ip link set dummy1 up
ip link set lo down ; ip link set lo up
After that sequence, the local route to the link layer address of dummy1 is
not there anymore.
When the loopback is set down, all local routes are deleted by
addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still
exists, because the corresponding idev has a reference on it. After the rcu
grace period, dst_rcu_free() is called, and thus ___dst_free(), which will
set obsolete to DST_OBSOLETE_DEAD.
In this case, init_loopback() is called before dst_rcu_free(), thus
obsolete is still sets to something <= 0. So, the function doesn't add the
route again. To avoid that race, let's check the rt6 refcnt instead.
Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by: Francesco Santoro <francesco.santoro@6wind.com> Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel
endpoints.") introduces support for wildcards in tunnels endpoints,
but in some rare circumstances ip6_tnl_lookup selects wrong tunnel
interface relying only on source or destination address of the packet
and not checking presence of wildcard in tunnels endpoints. Later in
ip6_tnl_rcv this packets can be dicarded because of difference in
ipproto even if fallback device have proper ipproto configuration.
This patch adds checks of wildcard endpoint in tunnel avoiding such
behavior
Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The phy_start() is used to indicate the PHY is now ready to do its
work. The state is changed, normally to PHY_UP which means that both
the MAC and the PHY are ready.
If the phy driver is using polling, when the next poll happens, the
state machine notices the PHY is now in PHY_UP, and kicks off
auto-negotiation, if needed.
If however, the PHY is using interrupts, there is no polling. The phy
is stuck in PHY_UP until the next interrupt comes along. And there is
no reason for the PHY to interrupt.
Have phy_start() schedule the state machine to run, which both speeds
up the polling use case, and makes the interrupt use case actually
work.
This problems exists whenever there is a state change which will not
cause an interrupt. Trigger the state machine in these cases,
e.g. phy_error().
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB
data that was moved at a different place in tcp_v6_rcv()
This patch moves tcp_v6_restore_cb() up and calls it from
tcp_v6_do_rcv() when np->pktoptions is set.
Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krister reported a kernel NULL pointer dereference after
tcf_action_init_1() invokes a_o->init(), it is a race condition
where one thread calling tcf_register_action() to initialize
the netns data after putting act ops in the global list and
the other thread searching the list and then calling
a_o->init(net, ...).
Fix this by moving the pernet ops registration before making
the action ops visible. This is fine because: a) we don't
rely on act_base in pernet ops->init(), b) in the worst case we
have a fully initialized netns but ops is still not ready so
new actions still can't be created.
Reported-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reserved field precise_offset->rsv is not cleared before being
copied to user space, leaking kernel stack memory. Clear the struct
before it's copied.
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since linux-3.15, netlink_dump() can use up to 16384 bytes skb
allocations.
Due to struct skb_shared_info ~320 bytes overhead, we end up using
order-3 (on x86) page allocations, that might trigger direct reclaim and
add stress.
The intent was really to attempt a large allocation but immediately
fallback to a smaller one (order-1 on x86) in case of memory stress.
On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to
meet the goal. Old kernels would need to remove __GFP_WAIT
While we are at it, since we do an order-3 allocation, allow to use
all the allocated bytes instead of 16384 to reduce syscalls during
large dumps.
If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.
This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()
Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a respin of a patch to fix a relatively easily reproducible kernel
panic related to the all_adj_list handling for netdevs in recent kernels.
The following sequence of commands will reproduce the issue:
ip link add link eth0 name eth0.100 type vlan id 100
ip link add link eth0 name eth0.200 type vlan id 200
ip link add name testbr type bridge
ip link set eth0.100 master testbr
ip link set eth0.200 master testbr
ip link add link testbr mac0 type macvlan
ip link delete dev testbr
This creates an upper/lower tree of (excuse the poor ASCII art):
/---eth0.100-eth0
mac0-testbr-
\---eth0.200-eth0
When testbr is deleted, the all_adj_lists are walked, and eth0 is deleted twice from
the mac0 list. Unfortunately, during setup in __netdev_upper_dev_link, only one
reference to eth0 is added, so this results in a panic.
This change adds reference count propagation so things are handled properly.
Matthias Schiffer reported a similar crash in batman-adv:
Signed-off-by: Andrew Collins <acollins@cradlepoint.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Generic skb_vlan_push/skb_vlan_pop functions don't properly handle the
case where the input skb data pointer does not point at the mac header:
- They're doing push/pop, but fail to properly unwind data back to its
original location.
For example, in the skb_vlan_push case, any subsequent
'skb_push(skb, skb->mac_len)' calls make the skb->data point 4 bytes
BEFORE start of frame, leading to bogus frames that may be transmitted.
- They update rcsum per the added/removed 4 bytes tag.
Alas if data is originally after the vlan/eth headers, then these
bytes were already pulled out of the csum.
OTOH calling skb_vlan_push/skb_vlan_pop with skb->data at mac_header
present no issues.
act_vlan is the only caller to skb_vlan_*() that has skb->data pointing
at network header (upon ingress).
Other calles (ovs, bpf) already adjust skb->data at mac_header.
This patch fixes act_vlan to point to the mac_header prior calling
skb_vlan_*() functions, as other callers do.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Pravin Shelar <pshelar@ovn.org> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 879c7220e828 ("net: pktgen: Observe needed_headroom
of the device") increased the 'pkt_overhead' field value by
LL_RESERVED_SPACE.
As a side effect the generated packet size, computed as:
is decreased by the same value.
The above changed slightly the behavior of existing pktgen users,
and made the procfs interface somewhat inconsistent.
Fix it by restoring the previous pkt_overhead value and using
LL_RESERVED_SPACE as extralen in skb allocation.
Also, change pktgen_alloc_skb() to only partially reserve
the headroom to allow the caller to prefetch from ll header
start.
v1 -> v2:
- fixed some typos in the comments
Fixes: 879c7220e828 ("net: pktgen: Observe needed_headroom of the device") Suggested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the mac address origin is not dt, you can only safely assign a mac
address after "link up" of the device. If the link is off the clocks are
disabled and because of issues assigning registers when clocks are off the
new mac address cannot be written in .ndo_set_mac_address() on some soc's.
This fix sets the mac address unconditionally in fec_restart(...) and
ensures consistency between fec registers and the network layer.
Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit a4675fbc4a7a (cpufreq: intel_pstate: Replace timers with
utilization update callbacks) the cpufreq governor callbacks may not
be invoked on NOHZ_FULL CPUs and, in particular, switching to the
"performance" policy via sysfs may not have any effect on them. That
is a problem, because it usually is desirable to squeeze the last
bit of performance out of those CPUs, so work around it by setting
the maximum P-state (within the limits) in intel_pstate_set_policy()
upfront when the policy is CPUFREQ_POLICY_PERFORMANCE.
Fixes: a4675fbc4a7a (cpufreq: intel_pstate: Replace timers with utilization update callbacks) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already
exists") introduced a bug by changing the possible error codes returned
by add_vol():
- this function no longer returns NULL in case of allocation failure
but return ERR_PTR(-ENOMEM)
- when a duplicate entry in the volume RB tree is found it returns
ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL)
Fix the tests done on add_vol() return val to match this new behavior.
Fixes: e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While free'ing qgroup->reserved resources, we much check if
the page has not been invalidated by a truncate operation
by checking if the page is still dirty before reducing the
qgroup resources. Resources in such a case are free'd when
the entire extent is released by delayed_ref.
This fixes a double accounting while releasing resources
in case of truncating a file, reproduced by the following testcase.
SCRATCH_DEV=/dev/vdb
SCRATCH_MNT=/mnt
mkfs.btrfs -f $SCRATCH_DEV
mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT
cd $SCRATCH_MNT
btrfs quota enable $SCRATCH_MNT
btrfs subvolume create a
btrfs qgroup limit 500m a $SCRATCH_MNT
sync
for c in {1..15}; do
dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file;
done
Commit 41061cdb98 ("KVM: emulate: do not initialize memopp") removes a
check for non-NULL under incorrect assumptions. An undefined instruction
with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt
to dereference a null pointer here.
Alexander Shiyan reports that CLPS711x fails at boot time in the data
exception handler due to a NULL pointer dereference. This is caused by
the late-v4t abort handler overwriting R9 (which becomes zero). Fix
this by making the abort handler save and restore R9.
Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is
divided by 2 inappropriatelly. But scr_memsetw expects size, not
count, because it divides the size by 2 on its own before doing actual
memset-by-words.
Pipelines can only be run if all their video nodes are streaming. Commit b4dfb9b35a19 ("[media] v4l: vsp1: Stop the pipeline upon the first
STREAMOFF") fixed the pipeline stop sequence, but introduced a race
condition that makes it possible to run a pipeline after stopping the
stream on a video node by queuing a buffer on the other side of the
pipeline.
Fix this by clearing the buffers ready flag when stopping the stream,
which will prevent the QBUF handler from running the pipeline.
Fixes: b4dfb9b35a19 ("[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF") Reported-by: Kieran Bingham <kieran@bingham.xyz> Tested-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we configure musb with 2430 glue as a peripheral, and then rmmod
omap2430 module, we'll get the following error:
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
...
rmmod/413 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
(&phy->mutex){+.+.+.}, at: [<c04b9fd0>] phy_power_off+0x1c/0xb8
[ 204.678710]
and this task is already holding:
(&(&musb->lock)->rlock){-.-...}, at: [<bf3a482c>]
musb_gadget_stop+0x24/0xec [musb_hdrc]
which would create a new lock dependency:
(&(&musb->lock)->rlock){-.-...} -> (&phy->mutex){+.+.+.}
...
This is because some glue layers expect musb_platform_enable/disable
to be called with spinlock held, and 2430 glue layer has USB PHY on
the I2C bus using a mutex.
We could fix the glue layers to take the spinlock, but we still have
a problem of musb_plaform_enable/disable being called in an unbalanced
manner. So that would still lead into USB PHY enable/disable related
problems for omap2430 glue layer.
While it makes sense to only enable USB PHY when needed from PM point
of view, in this case we just can't do it yet without breaking things.
So let's just revert phy_enable/disable related changes instead and
reconsider this after we have fixed musb_platform_enable/disable to
be balanced.
Fixes: a83e17d0f73b ("usb: musb: Improve PM runtime and phy handling for 2430 glue layer") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit b09b5224fe86 ("usb: chipidea: implement platform shutdown
callback") and commit 43a404577a93 ("usb: chipidea: host: set host to
be null after hcd is freed") a NULL pointer dereference is caused
on i.MX23 during shutdown. So ensure that role is set to CI_ROLE_END and
we finish interrupt handling before the hcd is deallocated. This avoids
the NULL pointer dereference.
Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: b09b5224fe86 ("usb: chipidea: implement platform shutdown callback") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 2abd9d5fa60f9 ("usb: dwc3: ep0: Add chained TRB support"), the
size of the memory allocated with 'dma_alloc_coherent()' has been modified
but the corresponding calls to 'dma_free_coherent()' have not been updated
accordingly.
This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@
Exported pwm channels aren't removed before the pwmchip and are
leaked. This results in invalid sysfs files. This fix removes
all exported pwm channels before chip removal.
As part of the sync framework destaging, the sync_file.h header
was moved, but an entry was not added on Kbuild to install it.
This patch resolves this omission so that "make headers_install"
installs this header.
Fixes: 460bfc41fd52 ("dma-buf/sync_file: de-stage sync_file headers") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160927143142.8975-1-emilio.lopez@collabora.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scan_pool() does not mark the PEB for scrubing when bitflips are
detected in the EC header of a free PEB (VID header region left to
0xff).
Make sure we scrub the PEB in this case.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin and Chris spotted that iptables NFLOG target was broken when they
upgraded the kernel to 4.8: "ulogd-2.0.5- IPs are no longer logged" or
"results in segfaults in ulogd-2.0.5".
Because "struct nf_loginfo li;" is a local variable, and flags will be
filled with garbage value, not inited to zero. So if it contains 0x1,
packets will not be logged to the userspace anymore.
Fixes: 7643507fe8b5 ("netfilter: xt_NFLOG: nflog-range does not truncate packets") Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Reported-by: Chris Caputo <ccaputo@alt.net> Tested-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instantiated I2C device nodes are marked with OF_POPULATE. This was
introduced in 4f001fd30145a6. On unloading, loaded device nodes will of
course be unmarked. The problem are nodes that fail during
initialisation: If a node fails, it won't be unloaded and hence not be
unmarked.
If a I2C driver module is unloaded and reloaded, it will skip nodes that
failed before.
Skip device nodes that are already populated and mark them only in case
of success.
Fixes: 4f001fd30145a6 ("i2c: Mark instantiated device nodes with OF_POPULATE") Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[wsa: use 14-digit commit sha] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: Daniel Stone <daniels@collabora.com> Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
(cherry picked from commit 2d2c5ad83f772d7d7b0bb8348ecea42e88f89ab0) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.
This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
commit c58b735fc762e891481e92af7124b85cb0a51fce
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:57 2016 +0100
drm/i915: Allocate rings from stolen
Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
drm_property_lookup_blob() returns a reference to the returned blob, and
drm_atomic_replace_property_blob() takes a references to the blob it
stores, so afterwards we are left owning a reference to the new_blob that
we never release, and thus leak memory every time we update a property
such as during drm_atomic_helper_legacy_gamma_set().
v2: update credentials, drm_property_unreference_blob() is NULL safe and
NULL is passed consistently to it throughout drm_atomic.c so do so here.
Reported-by: Felix Monninger <felix.monninger@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420 Signed-off-by: Felix Monninger <felix.monninger@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025212808.3908-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.
Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.
v2: Invert the patch order so stable backports get easier.
With the previous code we were only recomputing the DDB partitioning
for the CRTCs included in the atomic commit, so any other active CRTCs
would end up having their DDB registers zeroed. In this patch we make
sure that the computed state starts as a copy of the current
partitioning, and then we only zero the DDBs that we're actually
going to recompute.
How to reproduce the bug:
1 - Enable the primary plane on pipe A
2 - Enable the primary plane on pipe B
3 - Enable the cursor or sprite plane on pipe A
Step 3 will zero the DDB partitioning for pipe B since it's not
included in the commit that enabled the cursor or sprite for pipe A.
I expect this to fix many FIFO underrun problems on gen9+.
v2:
- Mention the cursor on the steps to reproduce the problem (Paulo).
- Add Testcase tag provided by Maarten (Maarten).
The fbdev helper code keeps around two lists of connectors. One is the
list of all connectors it could use, and that list already holds
references for all the connectors. However the other list, or rather
lists, is the one actively being used. That list is tracked per-crtc
and currently doesn't hold any extra references. Let's grab those
extra references to avoid oopsing when the connector vanishes. The
list of all possible connectors should get updated when the hpd happens,
but the list of actively used connectors would not get updated until
the next time the fb-helper picks through the set of possible connectors.
And so we need to hang on to the connectors until that time.
Since we need to clean up in drm_fb_helper_crtc_free() as well,
let's pull the code to a common place. And while at it let's
pull in up the modeset->mode cleanup in there as well. The case
of modeset->fb is a bit less clear. I'm thinking we should probably
hold a reference to it, but for now I just slapped on a FIXME.
v2: Cleanup things drm_fb_helper_crtc_free() too (Chris)
v3: Don't leak modeset->connectors (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to drop the connector references already taken when we
abort in the middle of drm_fb_helper_single_add_all_connectors()
Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 4.7 kernel, we've seen the error messages like
kernel: [TTM] Buffer eviction failed
kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001)
kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO
on QXL when switching and accessing on VT. The culprit was the
generic deferred_io code (qxl driver switched to it since 4.7).
There is a race between the dirty clip update and the call of
callback.
In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock,
while it kicks off the update worker outside the spinlock. Meanwhile
the update worker clears the dirty clip in the spinlock, too. Thus,
when drm_fb_helper_dirty() is called concurrently, schedule_work() is
called after the clip is cleared in the first worker call.
This patch addresses it by validating the clip before calling the
dirty fb callback.
Check whether the kernel really supports power resources for a device,
otherwise the power might not be removed when the device is runtime
suspended (DSM should still work in these cases where PR does not).
This is a workaround for a problem where ACPICA and Windows 10 differ in
behavior. ACPICA does not correctly enumerate power resources within a
conditional block (due to delayed execution of such blocks) and as a
result power_resources is set to false even if _PR3 exists.
Fixes: 692a17dcc292 ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398 Reported-and-tested-by: Rick Kerkhof <rick.2889@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The read is taking a considerable amount of time (about 50us on this
machine). The register does not ever hold anything other than the ring
ID that is updated in this exact function, so there is no need for
the read modify write cycle.
This chops off a big chunk of the time spent in hardirq disabled
context, as this function is called multiple times in the interrupt
handler. With this change applied radeon won't show up in the list
of the worst IRQ latency offenders anymore, where it was a regular
before.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's
relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which
are the two YUV pixel formats we support only), otherwise, we are likely to
trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is
probably not YU12 or YV12.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We added active plane reconfiguration support by forcing a full modeset
operation. So, looking at old_plane_state->fb to determine whether we need to
switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base()
or not is no more correct. Instead, we should do that only when we don't need
modeset, otherwise, we initialize the two EBA buffers with the buffer address.
Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mddev->curr_resync usually records where the current resync is up to,
but during the starting phase it has some "magic" values.
1 - means that the array is trying to start a resync, but has yielded
to another array which shares physical devices, and also needs to
start a resync
2 - means the array is trying to start resync, but has found another
array which shares physical devices and has already started resync.
3 - means that resync has commensed, but it is possible that nothing
has actually been resynced yet.
It is important that this value not be visible to user-space and
particularly that it doesn't get written to the metadata, as the
resync or recovery checkpoint. In part, this is because it may be
slightly higher than the correct value, though this is very rare.
In part, because it is not a multiple of 4K, and some devices only
support 4K aligned accesses.
There are two places where this value is propagates into either
->curr_resync_completed or ->recovery_cp or ->recovery_offset.
These currently avoid the propagation of values 1 and 3, but will
allow 3 to leak through.
Change them to only propagate the value if it is > 3.
As this can cause an array to fail, the patch is suitable for -stable.
This is the counterpart of raid10 fix. If a write error occurs, raid10
will try to rewrite the bio in small chunk size. If the rewrite fails,
raid10 will record the error in bad block. narrow_write_error will
always use WRITE for the bio, but actually it could be a discard. Since
discard bio hasn't payload, write the bio will cause different issues.
But discard error isn't fatal, we can safely ignore it. This is what
this patch does.
This issue should exist since discard is added, but only exposed with
recent arbitrary bio size feature.
If a write error occurs, raid1 will try to rewrite the bio in small
chunk size. If the rewrite fails, raid1 will record the error in bad
block. narrow_write_error will always use WRITE for the bio, but
actually it could be a discard. Since discard bio hasn't payload, write
the bio will cause different issues. But discard error isn't fatal, we
can safely ignore it. This is what this patch does.
This issue should exist since discard is added, but only exposed with
recent arbitrary bio size feature.
platform_get_resource can be returned the NULL pointer.
Then regs->start should be referred to NULL Pointer.
devm_ioremap_resource() checks whether res is NULL or not.
The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller
firmware. Depending on how drive caches are handled internally by
controller firmware this could potentially lead to data integrity
problems.
Ensure that cache flushes are passed to the controller.
[mkp: applied by hand and removed unused vars]
Signed-off-by: Ching Huang <ching2048@areca.com.tw> Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 0b8e3c4ca29f ("ath10k: move cal data len to hw_params") broke retrieving
the calibration data from cal_data debugfs file. The length of file was always
zero. The reason is:
This is obviously bogus, private_data cannot contain both struct ath10k and the
buffer. Fix it by caching calibration data to ar->debug.cal_data. This also
allows it to be accessed when the device is not active (interface is down).
The cal_data buffer is fixed size because during the first firmware probe we
don't yet know what will be the lenght of the calibration data. It was simplest
just to use a fixed length. There's a WARN_ON() in
ath10k_debug_cal_data_fetch() if the buffer is too small.
Tested with qca988x and firmware 10.2.4.70.56.
Reported-by: Nikolay Martynov <mar.kolya@gmail.com> Fixes: 0b8e3c4ca29f ("ath10k: move cal data len to hw_params") Signed-off-by: Marty Faltesek <mfaltesek@google.com>
[kvalo@qca.qualcomm.com: improve commit log and minor other changes] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 171f6402e4aa ("ath9k_hw: implement temperature compensation
support for AR9003+"). Some users report that this commit causes a regression
in performance under some conditions.
Fixes: 171f6402e4aa ("ath9k_hw: implement temperature compensation support for AR9003+") Signed-off-by: Felix Fietkau <nbd@nbd.name>
[kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mac80211, multicast A-MSDUs are accepted in many cases that
they shouldn't be accepted in:
* drop A-MSDUs with a multicast A1 (RA), as required by the
spec in 9.11 (802.11-2012 version)
* drop A-MSDUs with a 4-addr header, since the fourth address
can't actually be useful for them; unless 4-address frame
format is actually requested, even though the fourth address
is still not useful in this case, but ignored
Accepting the first case, in particular, is very problematic
since it allows anyone else with possession of a GTK to send
unicast frames encapsulated in a multicast A-MSDU, even when
the AP has client isolation enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:
datagram_size: The encoded size of the entire IP datagram. The
value of datagram_size [...] SHALL be one less than the value of
Total Length in the datagram's IP header (see STD 5, RFC 791).
Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:
Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.
Only firewire-net sets and gets datagram_size without this offset. The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394. (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
- from OS X fail entirely,
- from Win XP start out with a bunch of fragmented datagrams which
time out, then continue with unfragmented datagrams because Win XP
temporarily reduces the MTU to 576 bytes.
So let's fix firewire-net's datagram_size accessors.
Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed. (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IP-over-1394 driver firewire-net lacked input validation when
handling incoming fragmented datagrams. A maliciously formed fragment
with a respectively large datagram_offset would cause a memcpy past the
datagram buffer.
So, drop any packets carrying a fragment with offset + length larger
than datagram_size.
In addition, ensure that
- GASP header, unfragmented encapsulation header, or fragment
encapsulation header actually exists before we access it,
- the encapsulated datagram or fragment is of nonzero size.
The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.
With this patch the touchpad is detected:
$ dmesg | grep -E "(i8042|Elantech|elantech)"
[ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.680372] i8042: Attempting to reset device connected to KBD port
[ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
A device running without RX package aggregation could return more data
in the USB packet than the actual network packet. In this case we
could would clone the skb but then determine that that there was no
packet to handle and exit without freeing the cloned skb first.
This has so far only been observed with 8188eu devices, but could
affect others.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm-raid 1.9.0 fails to activate existing RAID4/10 devices that have the
old superblock format (which does not have takeover/reshaping support
that was added via commit 33e53f06850f).
Fix validation path for old superblocks by reverting to the old raid4
layout and basing checks on mddev->new_{level,layout,...} members in
super_init_validation().
In ecbfb9f118bce4 ("dm raid: add raid level takeover support") a new
compatible feature flag was added. Validation for these compat_features
was added but this only passes for new raid mappings with this feature
flag. This causes previously created raid mappings to be failed at
import.
Check compat_features for the only valid combination.
cleanup_mapped_device() calls kthread_stop() if kworker_task is
non-NULL. Currently the assigned value could be a valid task struct or
an error code (e.g -ENOMEM). Reset md->kworker_task to NULL if
kthread_run() returned an erorr.
dm_get_target_type() was previously called so any error returned from
dm_table_add_target() must first call dm_put_target_type(). Otherwise
the DM target module's reference count will leak and the associated
kernel module will be unable to be removed.
Also, leverage the fact that r is already -EINVAL and remove an extra
newline.
If a default leg has failed, any read will cause a new operational
default leg to be selected and the read is resubmitted. But until now
the read will return failure even though it was successful due to
resubmission. The reason for this is bio->bi_error was not being
cleared before resubmitting the bio.
Fix by clearing bio->bi_error before resubmission.
Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio") Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c6017e793b93 ("virtio: console: add locks around buffer removal
in port unplug path") added locking around the freeing of buffers in the
vq. However, when free_buf() is called with can_sleep = true and rproc
is enabled, it calls dma_free_coherent() directly, requiring interrupts
to be enabled. Currently a WARNING is triggered due to the spin locking
around free_buf, with a call stack like this:
Fix this by restructuring the loops to allow the locks to only be taken
where it is necessary to protect the vqs, and release it while the
buffer is being freed.
Fixes: c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Legacy virtio defines the virtqueue base using a 32-bit PFN field, with
a read-only register indicating a fixed page size of 4k.
This can cause problems for DMA allocators that allocate top down from
the DMA mask, which is set to 64 bits. In this case, the addresses are
silently truncated to 44-bit, leading to IOMMU faults, failure to read
from the queue or data corruption.
This patch restricts the coherent DMA mask for legacy PCI virtio devices
to 44 bits, which matches the specification.
Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Benjamin Serebrin <serebrin@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is
negotiated the driver MUST set flags to 0. Not dirtying the available
ring in virtqueue_disable_cb also has a minor positive performance
impact, improving L1 dcache load missed by ~0.5% in vring_bench.
Writes to the used event field (vring_used_event) are still unconditional.
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have one critical section in the syscall entry path in which we switch from
the userspace stack to kernel stack. In the event of an external interrupt, the
interrupt code distinguishes between those two states by analyzing the value of
sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that
the value of sr7 is in sync with the currently enabled stack.
This patch now disables interrupts while executing the critical section. This
prevents the interrupt handler to possibly see an inconsistent state which in
the worst case can lead to crashes.
Interestingly, in the syscall exit path interrupts were already disabled in the
critical section which switches back to the userspace stack.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure the copied up file hits the disk before renaming to the final
destination. If this is not done then the copy-up may corrupt the data in
the file in case of a crash.
If platform code returns a NULL pointer to the FDT, initial_boot_params
will not get set to a valid pointer and attempting to find the /chosen
node in it will cause a NULL pointer dereference and the kernel to crash
immediately on startup - with no output to the console.
Fix this by checking that initial_boot_params is valid before using it.
Jeff Layton says:
> Hm...now that I look though, this is a little suspicious:
>
> struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner);
>
> I wonder if it's possible for the openstateid to have already been
> destroyed at this point.
>
> We might be better off doing something like this to get the client pointer:
>
> stp->st_stid.sc_client;
>
> ...which should be more direct and less dependent on other stateids
> staying valid.
With the suggested change, I am no longer able to reproduce the above oops.
v2: Fix unhash_lock_stateid() as well
Fix-suggested-by: Jeff Layton <jlayton@redhat.com> Fixes: 42691398be08 ('nfsd: Fix race between FREE_STATEID and LOCK') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a very annoying regression on the Snowball SD card
that has been around for a while. It turns out that the device
tree does not configure the direction pins properly, nor sets
up the pins for the voltage converter properly at boot. Unless
all things are correctly set up, the feedback clock will not
work, and makes the driver spew messages in the console (but
it works, very slowly):
root@Ux500:/ mount /dev/mmcblk0p2 /mnt/
[ 9.953460] mmci-pl18x 80126000.sdi0_per1: error during DMA transfer!
[ 9.960296] mmcblk0: error -110 sending status command, retrying
[ 9.966461] mmcblk0: error -110 sending status command, retrying
[ 9.972534] mmcblk0: error -110 sending status command, aborting
Fix this by rectifying the device tree to correspond to that of
the Ux500 HREF boards plus the DAT31DIR setting that is unique for
the Snowball, and things start working smoothly. Add in the SDR12
and SDR25 modes which this host can do without any problems.
I don't know if this has ever been correct, sadly. It works after
this patch.
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the commit bd3677ff31a3 ("clk: mvebu: Remove corediv clock from
Armada XP"), the corediv clk is no more selected for Armada XP, however
this clock is used for Armada XP using the compatible
armada-370-corediv-clock.
While since commit 1594d568c6e3 ("clk: mvebu: Move corediv config to
mvebu config") Armada 38x and Armada 375 got corediv support again, not
only Armada XP was missed but also Armada 39x.
Actually all the SoC selecting MVEBU_V7 config need this clock:
git grep "\-corediv-clock" arch/arm/boot/dts
arch/arm/boot/dts/armada-370-xp.dtsi: compatible = "marvell,armada-370-corediv-clock";
arch/arm/boot/dts/armada-375.dtsi: compatible = "marvell,armada-375-corediv-clock";
arch/arm/boot/dts/armada-38x.dtsi: compatible = "marvell,armada-380-corediv-clock";
arch/arm/boot/dts/armada-39x.dtsi: compatible = "marvell,armada-390-corediv-clock"
This commit now fixes this behavior by letting MVEBU_V7 select
MVEBU_CLK_COREDIV.
The advancing of the PC when completing an MMIO load is done before
re-entering the guest, i.e. before restoring the guest ASID. However if
the load is in a branch delay slot it may need to access guest code to
read the prior branch instruction. This isn't safe in TLB mapped code at
the moment, nor in the future when we'll access unmapped guest segments
using direct user accessors too, as it could read the branch from host
user memory instead.
Therefore calculate the resume PC in advance while we're still in the
right context and save it in the new vcpu->arch.io_pc (replacing the no
longer needed vcpu->arch.pending_load_cause), and restore it on MMIO
completion.
The ERET instruction to return from exception is used for returning from
exception level (Status.EXL) and error level (Status.ERL). If both bits
are set however we should be returning from ERL first, as ERL can
interrupt EXL, for example when an NMI is taken. KVM however checks EXL
first.
Fix the order of the checks to match the pseudocode in the instruction
set manual.
Diag224 requires a page-aligned 4k buffer to store the name table
into. kmalloc does not guarantee page alignment, hence we replace it
with __get_free_page for the buffer allocation.
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vcpu->arch.wbinvd_dirty_mask may still be used after freeing it,
corrupting memory. For example, the following call trace may set a bit
in an already freed cpu mask:
kvm_arch_vcpu_load
vcpu_load
vmx_free_vcpu_nested
vmx_free_vcpu
kvm_arch_vcpu_free
Fix this by deferring freeing of wbinvd_dirty_mask.
dm_old_request_fn() has paths that access md->io_barrier. The party
destroying io_barrier should ensure that no future execution of
dm_old_request_fn() is possible. Move io_barrier destruction to below
blk_cleanup_queue() to ensure this and avoid a NULL pointer crash during
request-based DM device shutdown.
Commit 2518ac59eb27 ("staging: wilc1000: Replace kthread with workqueue
for host interface") adds an unconditional destroy_workqueue() on the
wilc's "hif_workqueue" soon after its creation thereby rendering
it unusable. It then further attempts to queue work onto this
non-existing hif_worqueue and results in:
This fix removes the unnecessary call to destroy_workqueue() while opening
the device to avoid the above kernel panic. The deinit routine already
does a good job of terminating the workqueue when no longer needed.
Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Fixes: 2518ac59eb27 ("staging: wilc1000: Replace kthread with workqueue for host interface") Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
