Peter Krempa [Mon, 17 Feb 2025 13:16:04 +0000 (14:16 +0100)]
virPerfReadEvent: Refactor to return -errno on failure
The function didn't comply with libvirt's error reporting scheme as it
reported libvirt errors only sometimes. As callers may want to ignore
errors convert it to returning -errno on failure instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Tue, 18 Feb 2025 04:00:58 +0000 (23:00 -0500)]
util: fix compile warning in virsystemd.c during mingw builds
A function was changed from having no arguments to having a single
argument, but the entire body of the function was #ifdefed out for
windows builds, leaving that new argument unused. Surprisingly this
didn't cause the build to fail, but I happened to notice it flit by
during an rpm build.
Fixes: 785cd56e5803fbbf60715fb6c7536360df5b4b9e Signed-off-by: Laine Stump <laine@redhat.com>
Andrea Bolognani [Thu, 13 Feb 2025 08:54:05 +0000 (09:54 +0100)]
utils: Canonicalize paths before comparing them
In virFileIsSharedFSOverride() we compare a path against a list
of overrides looking for a match.
All overrides are canonicalized ahead of time though, so e.g.
/var/run/foo will be turned into /run/foo due to /var/run being
a symlink on modern Linux systems. But the path we're trying to
match with the overrides doesn't get the same treatment, so in
this scenario the comparison will always fail.
Canonicalizing the path as well solves the issue.
Resolves: https://issues.redhat.com/browse/RHEL-79165 Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Laine Stump [Sat, 15 Feb 2025 04:35:56 +0000 (23:35 -0500)]
docs: document using passt backend with <interface type='vhostuser'>
Almost everything is already there (in the section for using passt
with type='user'), so we just need to point to that from the
type='vhostuser' section (and vice versa), and add a bit of glue.
Also updated a few related details that have changed (e.g. default
model type for vhostuser is now 'virtio', and source type/mode are now
optional), and changed "vhost-user interface" to "vhost-user
connection" because the interface is a virtio interface, and
vhost-user is being used to connect that interface to the outside.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Wed, 12 Feb 2025 21:16:44 +0000 (16:16 -0500)]
qemu: complete vhostuser + passt support
<interface type='vhostuser'><backend type='passt'/> needs to run the
passt command just as is done for interface type='user', but then add
vhostuser bits to the qemu commandline/monitor command.
There are some changes to the parsing/validation along with changes to
the vhostuser codepath do do the extra stuff for passt. I tried
keeping them separated into different patches, but then the unit test
failed in a strange way deep down in the bowels of the commandline
generation, so this patch both 1) makes the final changes to
parsing/formatting and 2) adds passt stuff at appropriate places for
vhostuser (as well as making a couple of things *not* happen when the
passt backend is chosen). The result is that you can now have:
your passt interfaces will benefit from the greatly improved
efficiency of a vhost-user data path, and all without requiring
special privileges or capabilities *anywhere* (i.e. it works for
unprivileged libvirt (qemu:///session) as well as privileged libvirt).
Resolves: https://issues.redhat.com/browse/RHEL-69455 Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Wed, 12 Feb 2025 17:12:04 +0000 (12:12 -0500)]
qemu: make qemuPasstCreateSocketPath() public
When passt is used with vhostuser, the vhostuser code that builds the
qemu commandline will need to have the same socket path that is given
to the passt command, so this patch makes it visible outside of
qemu_passt.c.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Tue, 11 Feb 2025 21:30:11 +0000 (16:30 -0500)]
qemu: use switch instead of if in qemuProcessPrepareDomainNetwork()
qemuProcessPrepareDomain()'s comments say that it should be the only
place to change the "live XML" of a domain (i.e. the public parts of
the virDomainDef object that is shown in the domain's status
XML), and that seems like a reasonable idea (although there aren't
many users of it to date).
qemuProcessPrepareDomainNetwork() is called by the aforementioned
qemuProcessPrepareDomain() - this patch changes the "if (type ==
HOSTDEV)" in that function to a "switch(type)" so it's simpler to add
DomainDef modifications for various other types of virDomainNetDef,
and also so that anyone who adds a new interface type is forced to
look at the code and decide if anything needs to be done here for the
new type.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Mon, 10 Feb 2025 03:52:54 +0000 (22:52 -0500)]
conf/qemu: make <source> element *almost* optional for type=vhostuser
For some reason, when vhostuser interface support was added in 2014,
the parser required that the XML for the <interface> have a <source>
element with type, mode, and path, all 3 also required. This in spite
of the fact that 'unix' is the only possible valid setting for type,
and 95% of the time the mode is set to 'client' (as I understand from
comments in the code, normally a guest will use mode='client' to
connect to an existing socket that is precreated (by OVS?), and the
only use for mode='server' is for test setups where one guest is setup
with a listening vhostuser socket (i.e. 'server') and another guest
connects to that socket (i.e. 'client')). (or maybe one guest connects
to OVS in server mode, and all the others connect in client mode, not
sure - I don't claim to be an expert on vhost-user.)
So from the point of view of existing vhost-user functionality, it
seems reasonable to make 'type' and 'mode' optional, and by default
fill in the vhostuser part of the NetDef as if they were 'unix' and
'client'.
In theory, the <source> element itself is also not *directly* required
after this patch, however, the path attribute of <source> *is*
required (for now), so effectively the <source> element is still
required.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Mon, 10 Feb 2025 00:01:32 +0000 (19:01 -0500)]
qemu: do all vhostuser attribute validation in qemu driver
Since vhostuser is only used/supported by the QEMU driver, and all the
rest of the vhostuser-specific validation is done in QEMU's
validation, lets move the final check (to see if they've tried to
enable auto-reconnect when this interface is on the server side of the
vhostuser socket) to the QEMU validate.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Sun, 9 Feb 2025 23:23:03 +0000 (18:23 -0500)]
qemu: automatically set model type='virtio' for interface type='vhostuser'
Both vdpa and vhostuser require that the guest device be virtio, and
for interface type='vdpa', we already set <model type='virtio'/> if it
is unspecified in the input XML, so let's be just as courteous for
interface type='vhostuser'.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Sun, 9 Feb 2025 23:46:00 +0000 (18:46 -0500)]
qemu: validate that model is virtio for vhostuser and vdpa interfaces in the same place
Both vhostuser and vdpa interface types must use the virtio model in
the guest (because part of the functionality is implemented in the
guest virtio driver). Due to ["because that's the way it happened"]
this has been validated for vhostuser in the hypervisor-agnostic
validate function, but for vdpa it has been done in the QEMU-specific
validate. Since these interface models are only supported by QEMU
anyway, validate for both of them in the QEMU validation function.
Take advantage of this change to switch to using
virDomainNetIsVirtioModel(net) instead of "net->model ==
VIR_DOMAIN_NET_MODEL_VIRTIO" (the former also matches
...VIRTIO_TRANSITIONAL and ...VIRTIO_NON_TRANSITIONAL, so is more
correct).
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Laine Stump [Tue, 4 Feb 2025 21:06:18 +0000 (16:06 -0500)]
qemu: fix qemu validation to forbid guest-side IP address for type='vdpa'
Because all the checks for VIR_DOMAIN_NET_TYPE_VDPA were inside an
else-if clause that was immediately followed by another else-if clause
that forbid setting guestIP.ips or guestIP.routes, we've been allowing
users to set guestIP.* for vdpa interfaces (but then not doing
validation of the attributes that should have been done if we *did*
support setting IPs for vdpa (but we don't anyway, so :shrug:.)
This can be fixed by turning the vdpa else-if clause into a top-level
if - this way vdpa interfaces will hit the "else if
(net->guestIP.nips)" clause and reject guest-side IP address setting.
Also, since there are currently *no* interface types for QEMU that
support adding guest-side routes, we put that check by itself (I think
it may be possible to set some guest routes for passt interfaces, but
we don't do that)
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Wed, 12 Feb 2025 11:25:42 +0000 (12:25 +0100)]
remote_daemon: Silence DBus errors
When a daemon (like libvirtd, virtqemud, etc.) is started as an
unprivileged user (which is exactly how KubeVirt does it), then
it tries to register on both session and system DBus-es so that
it can shut itself down (e.g. when system is powering off or user
logs out). It's worth noting that this is just opportunistic and
if no DBus is available then no error is reported.
Or at least that's what we thought. Because the way our
virGDBusGetSessionBus() and virGDBusGetSystemBus() are written an
error is actually reported every time the daemon starts.
Use virGDBusHasSessionBus() and virGDBusHasSystemBus() to check
if corresponding bus is available.
Resolves: https://issues.redhat.com/browse/RHEL-79088 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's a common pattern for autostart of iterating over VMs, acquiring
a lock and ref count, then checking the autostart & is-active flags.
Wrap this all up into a helper method.
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This renames the existing notification API to better reflect its
semantics, and adds new APIs for reporting
* Initiation of config file reload
* Initiation of daemon shutdown process
* Adhoc progress status messages
* Request to extend service shutdown timeout
Reviewed-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 10 Feb 2025 18:49:10 +0000 (19:49 +0100)]
qemu: migration: Reactivate block nodes after migration if VM is left paused
On incoming migration qemu doesn't activate the block graph nodes right
away. This is to properly facilitate locking of the images.
The block nodes are normally re-activated when starting the CPUs after
migration, but in cases (e.g. when a paused VM was migrated) when the VM
is left paused the block nodes are not re-activated by qemu.
This means that blockjobs which would want to write to an existing
backing chain member would fail. Generally read-only jobs would succeed
with older qemu's but this was not intended.
Instead with new qemu you'll always get an error if attempting to access
a inactive node:
error: internal error: unable to execute QEMU command 'blockdev-mirror': Inactive 'libvirt-1-storage' can't be a backing child of active '#block052'
This is the case for explicit blockjobs (virsh blockcopy) but also for
non shared-storage migration (virsh migrate --copy-storage-all).
Since qemu now provides 'blockdev-set-active' QMP command which can
on-demand re-activate the nodes we can re-activate them in similar cases
as when we'd be starting vCPUs if the VM weren't left paused.
The only exception is on the source in case of a failed post-copy
migration as the VM already ran on destination so it won't ever run on
the source even when recovered.
Resolves: https://issues.redhat.com/browse/RHEL-78398 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Peter Krempa [Mon, 3 Feb 2025 14:45:49 +0000 (15:45 +0100)]
qemu: snapshot: Limit scope of checkpoint-snapshot interlock
'qemuDomainSupportsCheckpointsBlockjobs()' should really be used only
with active VMs based on the scope of interlocking it does.
This means that the inactive snapshot code path needs to do the
interlocking based on what's supported:
- external snapshot support was not implemented yet
(bitmaps need to be propagated to the new overlay image)
- internal snapshot support can be deferred to qemu
Move the check inside qemuSnapshotPrepare() which has knowledge about
the snapshot type and implement an explicit check for the inactive case.
See: https://gitlab.com/libvirt/libvirt/-/issues/739 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pavel Hrdina [Wed, 12 Feb 2025 10:12:03 +0000 (11:12 +0100)]
qemu: fix qemuDomainSaveImageDefineXML
The commit in question made an incorrect change that resulted in getting
O_RDONLY FD instead of O_RDWR preventing any writes to happen with the
following error:
virQEMUSaveDataWrite:176 : failed to write header to domain save file '/path/to/save.img': Bad file descriptor
Pass 'bypass_cache' as proper bool as the original code did.
Fixes: 517248e2394476a3105ff5866b0b718fc6583073 Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
node_device: Do not lock the driver state needlessly
When processing the PCI devices we can only read the configs for each of
them if running as privileged. That information is saved in the driver
state as a boolean introduced in commit 643c74abff01. However since
that version it is only written to once during nodeStateInitialize() and
only read from that point (apart from some commits around v3.9.0 release
when it was not even set, but that was fixed before v3.10.0). And it is
only read once, just to store that boolean in a temporary variable which
is also used in only one condition.
Rewrite this without locking and save few lines of code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
node_device_udev: add error reporting to udevProcessCCWGroup
Add reporting an internal error when the string to type conversion of
devtype fails as this indicates a serious problem since devtype was used
to get into this method during the udev event handling.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 6 Feb 2025 15:20:45 +0000 (16:20 +0100)]
qemu: domain: Initialize FD passthrough for a virStorageSource before using it
The call to 'qemuBlockStorageSourceNeedsFormatLayer()' bases the
decision also on the state of the passed FD, so we must initialize the
passthrough data via 'qemuDomainPrepareStorageSourceFDs()' before the
aforementioned call.
In the test change it's visible that we didn't add the necessary 'raw'
driver which allows the 'protocol' blockdev to be opened in 'rw' mode so
that qemu picks the proper file descriptior while keeping the device
read-only.
Resolves: https://issues.redhat.com/browse/RHEL-37519 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Peter Krempa [Thu, 6 Feb 2025 14:55:37 +0000 (15:55 +0100)]
qemuxmlconftest: Add testing of FDs with 'writable' flag in 'disk-source-fd'
Add few examples of fd groups with the 'writable' flag set, when passing
a single FD. Notably as a top level image of a readonly disk (even when
that doesn't make much sense) and also as a base image of a chain.
Note that this documents a status quo of a bug fixed in upcoming patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This API only queries the XML settings and not the running threads
themselves. In order to avoid confusion, change the wording slightly.
Resolves: https://issues.redhat.com/browse/RHEL-72052 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently, I was part of a discussion where it was suspected that
libvirt does not pick up correct FW for SEV-SNP guests. Update
our test to demonstrate it does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Peter Krempa [Tue, 4 Feb 2025 17:06:00 +0000 (18:06 +0100)]
qemu: Attach persistent reservations manager if block-copy target requires it
Users can choose to copy a disk into a destination where they want to
use persistent reservations. Start the daemon if the configuration
requires it.
Resolves: https://issues.redhat.com/browse/RHEL-7342 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Notable changes:
- '10.0' machine types added
- 'hub' chardev backend added
- 'cpr' migrate channel added
- 'nsamples' field for 'dbus' audio backend now reported
- 'ClearwaterForest-v1' cpu model added
- 'SierraForest-v2' cpu model added
- 'ivshmem-flat' device added
- new qom objects:
- 'virtio-mem-system-reset'
- 'vmclock'
- default value of 'rombar' changed from 1 to -1 for all devices
- 'intel-iommu' device:
- default value of 'aw-bit' changed from '39' to '48'
- 'fs1gp' boolean added
- 'x-flts' boolean added
- 'virtio-balloon-pci'/'virtio-mem-pci':
- 'ioeventfd' added
- 'vectors' added
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 3 Feb 2025 16:52:50 +0000 (17:52 +0100)]
qemu: snapshot: Ensure that NVRAM image exists when taking inactive internal snapshot
Attempting to take an internal snapshot of a freshly defined VM with
qcow2 backed NVRAM results in failure as the NVRAM image doesn't get
populated until the VM is started for the first time.
Fix this by invoking qemuPrepareNVRAM() when qcow2 nvram is defined.
Resolves: https://issues.redhat.com/browse/RHEL-73315 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Mon, 3 Feb 2025 16:48:05 +0000 (17:48 +0100)]
qemu: process: Export qemuPrepareNVRAM for use in snapshot code
Export qemuPrepareNVRAM so that it doesn't require the VM object. The
snapshot code needs in the corner case of creating a snapshot of a
freshly defined VM ensure that the nvram image exists in order to
snapshot it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The variable holds the amount of disks to roll back the snapshot for.
The value must be set before the code jumps to the 'rollback:' label so
the best situation is to not initialize it and let the compiler catch
errors rather than initialize the unsigned variable to -1 and let it
crash.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
nodedev: add ccwgroup capability support to ccw devices
Add the group membership information to a CCW device. Allow to filter
CCW devices based on a group membership.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add ccwgroup node device type supporting qeth generic driver.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor method to be only ccw state type depended to allow reuse in a
later patch.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
nodedev: refactor CCW state format for use in ccwgroup
Refactor to allow reuse in ccwgroup.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace cssid, ssid and devno elements with virCCWDeviceAddress.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fabricio Duarte [Mon, 16 Dec 2024 22:02:44 +0000 (19:02 -0300)]
docs: fix 'virsh domstats --vcpu' measure units and descriptions
The fields are in nanoseconds, not microseconds. Also fixes the
description of `vcpu.<num>.wait`, as it does not actually represent the
time waiting on I/O.
Signed-off-by: Fabricio Duarte <fabricio.duarte.jr@gmail.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Peter Krempa [Fri, 24 Jan 2025 15:26:54 +0000 (16:26 +0100)]
include: libvirt-domain: Add 'message' @reason of VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
In case when the hypervisor does report the reason for the I/O error as
an unstable string to display to users we can add a @reason possibility
for the I/O error event noting that the error is available.
Add 'message' as a reason enumeration value and document it
to instruct users to look at the logs or virDomainGetMessages().
The resulting event looks like:
event 'io-error' for domain 'cd': /dev/mapper/errdev0 (virtio-disk0) report due to message
Users then can look at the virDomainGetMessages() API:
Report any stored I/O error messages reported by the hypervisor when
reporting messages of a domain. As the I/O error may be already stale we
report also the timestamp when it was recorded.
Peter Krempa [Mon, 27 Jan 2025 16:38:51 +0000 (17:38 +0100)]
virDomainObjGetMessages: Refactor using GPtrArray
Simplify the function especially by rewriting it using GPtrArray to
construct the string list, especially for the upcoming case when the
number of added elements will not be known beforehand and when
hypervisor specific data will be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 27 Jan 2025 15:20:43 +0000 (16:20 +0100)]
virStorageSource: Add fields for storing last I/O error message
Hypervisors may report a I/O error message (unstable; for human use)
to libvirt. In order to store it with the appropriate virStorageSource
so that it can be later queried we need to add fields to
virStorageSource to store the timestamp and message.
The message is deliberately not copied via virStorageSourceCopy.
The messages are also not serialized to the status XML as losing them on
a daemon restart as they're likely to be stale anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Tue, 28 Jan 2025 09:39:52 +0000 (10:39 +0100)]
qemuMonitorJSONHandleIOError: Propagate new 'qom-path' field
QEMU commit v9.1.0-1065-ge67b7aef7c added 'qom-path' as an optional
field for the BLOCK_IO_ERROR event. Extract and propagate it as an
alternative to lookup via 'node-name' and 'device' (alias).
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Fri, 24 Jan 2025 16:17:51 +0000 (17:17 +0100)]
qemuProcessHandleIOError: Prefer lookup by node name
When qemu reports a node name for an I/O error we should prefer the
lookup by node name instead as it gives us the path to the specific
image which caused the error instead of the top level image path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 27 Jan 2025 12:53:36 +0000 (13:53 +0100)]
qemuMonitorJSONHandleIOError: Do not munge 'reason' field of IO error event
Leave the interpretation of the event to 'qemuProcessHandleIOError()'
which will create it's own variant of the messages for the user-facing
libvirt events. qemuMonitorJSONHandleIOError() will pass through the raw
data it got from qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
projects / thirdparty / libvirt.git / log
