INAGAKI Hiroshi [Sat, 8 May 2021 08:51:29 +0000 (17:51 +0900)]
realtek: update GPIO bindings in the dts files in dts-5.10
this patch includes the following changes:
- adjust mapping for the new driver
- GPIO 24 -> GPIO 0
- GPIO 47 -> GPIO 0 (+ disabling system LED)
- disable pins in the invalid range
(out of the range 0-31 of the new driver)
- are these pins on the external RTL8231 (&gpio1)?
- GPIO 67 (-> GPIO 3 on &gpio1?)
- GPIO 94 (-> GPIO 30 on &gpio1?)
- drop "indirect-access-bus-id" property from gpio0 node in device dts
files
INAGAKI Hiroshi [Sat, 8 May 2021 08:28:58 +0000 (17:28 +0900)]
realtek: fix kernel panic in DSA driver for 5.10
dsa_to_port function in 5.10 returns dsa_port from the port list in
dsa_switch_tree, but the tree is built when the switch is registered
by dsa_register_switch and it's null in rtl83xx_mdio_probe.
So, we need to use dsa_to_port after the registration of the switch.
INAGAKI Hiroshi [Wed, 11 Aug 2021 11:27:38 +0000 (20:27 +0900)]
realtek: cleanup and update soc dtsi in 5.10
the following changes are included in this patch:
- node is enabled by default, drop 'status = "okay"'
- adjust order of "compatible" lines and "reg" lines
- add a new blank line before fixed-link node in rtl830x.dtsi
INAGAKI Hiroshi [Wed, 11 Aug 2021 11:23:06 +0000 (20:23 +0900)]
realtek: copy dts directory for Kernel 5.10
This patch adds "dts-5.10" directory to use backported drivers.
There are several specification changes in the new drivers, so there
are some compatibility issues in using dts/dtsi files for 5.4.
The old DTS files are moved to "dts-5.4", so their corresponding
kernel version is obvious as well.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[change "dts" to "dts-5.4", adjust Makefile] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
INAGAKI Hiroshi [Fri, 21 May 2021 14:16:37 +0000 (23:16 +0900)]
realtek: backport irq-realtek-rtl driver from 5.12 to 5.10
This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12.
"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
is used in OpenWrt, so update the dependency by the additional patch.
INAGAKI Hiroshi [Wed, 5 May 2021 13:05:39 +0000 (22:05 +0900)]
realtek: backport gpio-realtek-otto driver from 5.13 to 5.10
This patch backports "gpio-realtek-otto" driver to Kernel 5.10.
"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
is used in OpenWrt, so update the dependency by the additional patch.
Note: GPIO mapping is changed in the upstreamed driver.
INAGAKI Hiroshi [Thu, 6 May 2021 10:30:58 +0000 (19:30 +0900)]
realtek: backport spi-realtek-rtl driver from 5.12 to 5.10
This patch backports "spi-realtek-rtl" driver to Kernel 5.10 from 5.12.
"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
is used in OpenWrt, so update the dependency by the additional patch.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
By default, the PoE outputs do not work with OpenWrt. To make them output
power, install the "poemgr" package from the packages feed.
This package can control the PD69104B1 PSE controller.
Installation
------------
1. Connect to the booted device at 192.168.1.20 using username/password
"ubnt" via SSH.
2. Add the uboot-envtools configuration file /etc/fw_env.config with the
following content
Andrew Cameron [Mon, 12 Apr 2021 18:24:33 +0000 (13:24 -0500)]
ath79: add support for TP-Link CPE710-v1
TP-Link CPE710-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on the AP152 reference board
Specifications:
- SoC: QCA9563-AL3A MIPS 74kc @ 775MHz, AHB @ 258MHz
- RAM: 128MiB DDR2 @ 650MHz
- Flash: 16MiB SPI NOR Based on the GD25Q128
- Wi-Fi 5Ghz: ath10k chip (802.11ac for up to 867Mbps on 5GHz wireless
data rate) Based on the QCA9896
- Ethernet: one 1GbE port
- 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal
reflector
- Power, LAN, WLAN5G Blue LEDs
- 3x Blue LEDs
Flashing instructions:
Flash factory image through stock firmware WEB UI or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 30-40 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[convert to nvmem, fix MAC assignment in 11-ath10k-caldata] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Nick Hainke <vincent@systemli.org> [ipq4019/fritzbox-7530
ipq4019/fritzbox-4040
ipq4019/sxtsq-5ac] Tested-by: Szabolcs Hubai <szab.hu@gmail.com> [ipq4029/gl-b1300] Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq4019/map-ac2200]
[add tested-by and note about failed devices] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Robert Marko [Sun, 12 Sep 2021 21:50:20 +0000 (23:50 +0200)]
ipq40xx: 5.10: move AR40xx to MDIO drivers
MDIO drivers were moved into their own sub directory of networking drivers.
This has caused the AR40xx driver to probe before MDIO drivers and that wont
work as it depends on the MDIO bus to be up so it can be fetched.
Lets solve it by moving the AR40xx into MDIO folder so they get probed like
before.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Robert Marko [Sun, 12 Sep 2021 20:40:39 +0000 (22:40 +0200)]
ipq40xx: 5.10: add kernel config
Copy config from 5.4 and run "make kernel_oldconfig".
Select default ("N") for all new symbols.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
[make commit message more explicit] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
1. Boot WN-DX2033GR normally
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新") button
to perform firmware update
4. On the initramfs image, download the sysupgrade.bin image to the
device and perform sysupgrade with it
5. Wait ~120 seconds to complete flashing
Notes:
- The hardware of WN-DX2033GR and WN-AX2033GR are almost the same, and
it is certified under the same radio-wave related regulations in Japan
- The last 0x80000 (512 KiB) in NAND flash is not used on stock firmware
- stock firmware requires "customized uImage header" (called as "combo
image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't
- uImage magic ( 0x0 - 0x3 ) : 0x434F4D42 ("COMB")
- header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32"
- image name (0x20 - 0x37) : model ID and firmware versions
- data length (0x38 - 0x3b) : kernel + rootfs
- data crc32 (0x3c - 0x3f) : kernel + rootfs
- There are 2x important flags in the flash:
- bootnum : select os partition for booting (persist, 0x4)
- 0x01: firmware
- 0x02: firmware_2
- debugflag : allow interrupt kernel loader, it's named as "Z-LOADER"
(Factory, 0xFE75)
In hostapd_ubus_add_bss(), ubus objects are not registered for mesh
interfaces. This provokes a segfault when accessing the ubus object in
mesh deinit.
This commit adds the same condition to hostapd_ubus_free_bss() for
discarding those mesh interfaces.
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
David Bauer [Thu, 23 Sep 2021 19:01:37 +0000 (21:01 +0200)]
rockchip: fix broken squashfs sysupgrade
The rockchip platform supports squashfs SD card images. However, the
resulting image is not padded to completely fill the rootfs partition.
Because of that, the f2fs overlay might not be erased, resulting in
uci-defaults not bing executed or the configuration not being erased,
even though drop config was selected.
Modify the image generation process so the image is padded to cover the
entire root filesystem partition.
The new `pkgmanifestjson` call prints all package manifest of a feed in
JSON format. This function can be used to print an overview of packages
information used for downstream tooling.
The script is entirely based on Petrs work on dependency visualisation.
Sven Eckelmann [Wed, 22 Sep 2021 15:56:30 +0000 (17:56 +0200)]
ipq-wifi: Work around Plasma Cloud PA1200 5GHz crash
It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt
21.02.0. The problem seems to be triggered by the the nonLinearTxFir field
in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then
the firmware just crashes when setting up the 5Ghz radio using `ifconfig
wlan1 up`:
Sven Eckelmann [Wed, 22 Sep 2021 15:56:30 +0000 (17:56 +0200)]
ipq-wifi: Update Plasma Cloud PA1200 BDFs to firmware 3.5.12
The official Plasma Cloud firmware adjusted the BDFs to contain new
conformance test limits and target power values. These should be imported
to avoid emissions outside the allowed limits.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
scripts: mkits.sh: Allow legacy @ mode for dts creation
commit 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes")
broke support for Meraki MR32 and this patch makes the replacement
configurable allowing for specifying the @ or - or whatever character
that is desired to retain backwards compatibility with existing devices.
For example, this patch includes the fix for the Meraki MR32 in
target/linux/bcm53xx/image for meraki_mr32:
Fixes: 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes") Signed-off-by: Damien Mascord <tusker@tusker.org>
[Added tags, checkpatch.pl fixes, noted that this is for old stuff] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This breaks the package builds using the SDK.
The targets all build fine, but the package builder fails on many
packages. The package builder uses the OpenWrt SDK.
Ansuel Smith [Tue, 6 Jul 2021 01:53:58 +0000 (03:53 +0200)]
scripts: handle gcc and linux in dl_cleanup script
Handle gcc and linux with a special regex that set their progname with
their major version. This way every minor version can be cleared. The
build cleanup logic can be tweaked later to clean the entire toolchain
and target dir with a different gcc version.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[reformat commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
Ansuel Smith [Mon, 5 Jul 2021 22:56:21 +0000 (00:56 +0200)]
scripts: add missing regex for dl_cleanup script
Regex xxx-YYYY-MM-DD-GIT_SHASUM was missing. Add the new regex to improve
and better find outdated package. This also fix a bug where some bug were
incorrectly detected as packagename-yyyy-mm-dd instead of packagename due
to them be parsed by the wrong parser
Timo Sigurdsson [Sat, 26 Jun 2021 11:04:49 +0000 (13:04 +0200)]
fstools: ensure filesystems are mounted before log service starts
Currently, the fstab service starts after the log service which breaks
the ability to write a persistent log file to a filesystem mounted by
the fstab service. Thus, change the start order of the fstab service so
it starts right before the log service.
Fixes: b131853 ("ubox: update to latest git revision") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[set to 11 to be explicitly before log, not only alphabetically, SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
Refresh all patches.
The removed patches were integrated upstream.
This contains fixes for CVE-2020-3702
1. These patches (ath, ath9k, mac80211) were included in kernel
versions since 4.14.245 and 4.19.205. They fix security vulnerability
CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2].
Thank you Josef Schlehofer for reporting this problem.
David Lam [Mon, 20 Sep 2021 05:42:14 +0000 (22:42 -0700)]
6rd: delete tunnel on interface teardown
Delete tunnel on 6rd interface teardown.
Should solve problem related to tunnel stuck on restart loop
with "Unknown Command" on tunnel restart due to wan connection drop.
This patch is similar to the one written by Ansuel on Aug 2, 2021
but the 6rd teardown produces the same symptoms when the network
service is restarted.
Felix Fietkau [Fri, 27 Aug 2021 10:38:12 +0000 (12:38 +0200)]
ustp: update to the latest version
c62d85cf7a0d bridge: check port bpdu filter status and apply it to the config 25555611be91 libnetlink: turn rtnetlink error answers into debug msgs 462b3a491347 build: use pthread cflags/ldflags
Felix Fietkau [Fri, 27 Aug 2021 10:33:37 +0000 (12:33 +0200)]
netifd: update to the latest version
d590fbd255ce wireless: always enable bpdu filter for AP interfaces and VLANs f8ff6d820283 system-linux: remove copy&paste from /proc and /sys path names 300b1220fab3 wireless: improve reliability of proxyarp support 5ba9744aac6d device: add support for configuring bonding devices 6fa9b042ff4d wireless: only apply wireless device attributes to the base vif interface 06d11bbf1f2b wireless: only enable proxyarp/isolate for AP vifs 08e954e137ff bonding: claim the port device before creating the bonding device
This updates libtool to its current release, from 2015. Current patches
were renumbered and given a description text. The fix in
160-passthrough-ssp.patch is no longer needed.
A patch to speed up build was cherry-picked, and another openwrt
specific patch was needed to not use quotes in $(SHELL), to acommodate
our "SHELL=/usr/bin/env bash" usage.
The already present call to ./bootstrap ensures that generated files are
refreshed, so the patches are applied only to their sources. Also, that
bootstrap call was adjusted to run at the appropriate time when QUILT=1.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
kernel: add missing CONFIG_NET_DSA_TAG_BRCM_LEGACY config symbol
This fixes:
Distributed Switch Architecture (NET_DSA) [Y/n/m/?] y
Tag driver for Atheros AR9331 SoC with built-in switch (NET_DSA_TAG_AR9331) [N/m/y/?] n
Tag driver for Broadcom switches using in-frame headers (NET_DSA_TAG_BRCM) [N/m/y/?] n
Tag driver for Broadcom legacy switches using in-frame headers (NET_DSA_TAG_BRCM_LEGACY) [N/m/y/?] (NEW)
Error in reading or end of file.
ccaaab1c048159611e93a181dde740f49fa12483 says that this is in the
codebase because of libsigc++, which is not in the codebase anymore.
Neither in base nor in packages. It doesn't seem to be needed by
anything else either. GNOME packages have transitioned to using meson,
which does not use m4 files.
Tested local compile with CONFIG_ALL. No problems seen.
bcm53xx: drop DTS based workaround for serial support in procd
Specifying serial in bootargs is not needed since the commit ffeb37047e85 ("procd: update to git HEAD"). It's thanks to the procd
commit 2cfc26f8456a ("inittab: detect active console from kernel if no
console= specified").
Daniel Golle [Wed, 15 Sep 2021 20:46:17 +0000 (21:46 +0100)]
procd: update to git HEAD
8a60e7e trace: don't leak file descriptor in error path 68df9ac procd: fix container deletion f16abe0 uxc: add JSON output option for 'list' command a23c888 jail: prepare for adding process to existing namespace 50da8a4 instance: allow jailed service to join namespace(s) 482d1ab Revert "jail: do not hack /etc/resolv.conf on container rootfs" 1eb4371 jail: start ubus and netifd instances for container with netns
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- 420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch 89866b2667e0d arm64: dts: allwinner: a64: olinuxino: add user red LED
- 440-add-h6-pwm.patch a7fe985633f92 pwm: sun4i: Add an optional probe for reset line b8d74644f34a8 pwm: sun4i: Prefer "mod" clock to unnamed 5b090b430d750 pwm: sun4i: Add an optional probe for bus clock fa4d81784681a pwm: sun4i: Always calculate params when applying new parameters 9f28e95b5286f pwm: sun4i: Add support to output source clock directly fdd2c12e3761f pwm: sun4i: Add support for H6 PWM
Daniel Golle [Fri, 10 Sep 2021 22:02:15 +0000 (23:02 +0100)]
sunxi: bring up DSA b53 switch on Lamobo R1
Build cortexa7 subtarget with DSA driver for MDIO-connected Broadcom
BCM53xxx switches. This is needed for the Lamobo R1 aka. BananaPi
BPi-R1 board which comes with such a switch IC.
Remove old swconfig driver from target kernel config as the only board
using it is now supported by the DSA driver.
No changes to device tree are needed as upstream DTS already got a
DSA switch definition and we are just using that upstream source.
Update default network config of the Lamobo R1 to create lan bridge
with all 4 lan ports.
Introduce DEVICE_COMPAT_VERSION for the board to inform users about
having the re-create their network configuration and add device alias
as Bananapi BPi-R1 while at it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
projects / thirdparty / openwrt.git / log
