Steffan Karger [Sun, 1 Jun 2014 17:58:53 +0000 (19:58 +0200)]
Fix ssl.c, ssl_verify_* includes
* ssl.c: remove three unneeded includes
* ssl_verify_polarssl.h: remove two unneeded includes
* ssl_verify_openssl.c: add missing ssl_verify_openssl.h and error.h
includes, and reorder includes.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1401645536-27849-3-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8753 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Tue, 14 Jan 2014 13:33:18 +0000 (14:33 +0100)]
Merge get_default_gateway() implementation for all 4+1 BSD variants.
This was 3 times mostly the same code, with the 4 traditional BSDs
only differing in a single line, while MacOS X had more refined code
to do not only gateway determination, but also netmask, interface name
and MAC address.
The MacOS X code works perfectly well on the other BSDs *if* one macro
is #ifdef'ed to use "(uint32_t)" on MacOS X and "(long)" on all other
BSDs, 32 and 64 bit variants. API change by OSX when going to 64bit.
Tested on FreeBSD 8.3/i386, FreeBSD 9.1/amd64, NetbSD 5.1/amd64,
OpenBSD 4.9/i386, OpenBSD 5.4/amd64 (= all affected platforms except
DragonFly BSD).
See also trac#42 and trac#340.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Lazy-Ack-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1389706398-26922-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8233
Gert Doering [Tue, 29 Apr 2014 21:09:39 +0000 (23:09 +0200)]
Conditionalize calls to print_default_gateway on !ENABLE_SMALL
Calls to print_default_gateway() depended on #ifdef ENABLE_DEBUG, but
the actual function wasn't compiled in #ifdef ENABLE_SMALL, so the
combination "configure --enable-small --enable-debug" didn't work. Fix.
Dmitrij Tejblum [Sat, 8 Feb 2014 15:33:49 +0000 (19:33 +0400)]
Fix is_ipv6 in case of tap interface.
While checking a packet on a TAP interface, is_ipv_X() in proto.c
insist that the ethertype must be OPENVPN_ETH_P_IPV4, even if
the protocol is IPv6. So the protocol never match, and, thus,
mssfix doesn't work for IPv6 on TAP interface. Fix that.
Signed-off-by: Dmitrij Tejblum <dt@yandex.ru> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1391873629-14388-1-git-send-email-dt@yandex.ru>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8259 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Fix build system to accept non-system crypto library locations for plugins.
Flags like {OPEN,POLAR}SSL_CFLAGS were used by the core build, but not by
the plugins. However, all plugins include openvpn-plugin.h, which need
crypto/ssl headers.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1398080238-19662-1-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8576 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Sat, 26 Apr 2014 11:30:54 +0000 (13:30 +0200)]
More IPv6-related updates to the openvpn man page.
Point to correct kernel version for --multihome and IPv4-mapped
addresses (3.15, Tore Anderson).
Remove old reference to http://www.greenie.net/ from the IPv6 section,
as the code and documentation in here is more current than on that site.
Some more additions and clarifications.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Tore Anderson <tore@fud.no>
Message-Id: <1398511854-3609-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8642
Make serial env exporting consistent amongst OpenSSL and PolarSSL builds.
This changes the representation of the tls_serial_{n} environment variable
from hex to decimal for PolarSSL builds, to match OpenSSL build behaviour.
Because hex representation for serials makes sense too, and to ease
transition for PolarSSL users, added tls_serial_hex_{n} that exports the
serial in hex represenation for both crypto library backends.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1398588561-18964-1-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8649 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Change signedness of hash in x509_get_sha1_hash(), fixes compiler warning.
hash was cast from char * to unsigned char * at the return of the function.
This patch removes the implicit cast by declaring hash as unsigned char * .
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1398585348-7969-1-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8647 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Sun, 19 Jan 2014 20:51:37 +0000 (21:51 +0100)]
Repair --multihome on FreeBSD for IPv4 sockets.
The code in link_socket_write_udp_posix_sendmsg() for the IP_RECVDESTADDR
case was sending a too-large control message (sizeof openvpn_pktinfo,
which is a union for IPv4+IPv6) instead of just openvpn_in4_pktinfo,
leading to sendmsg() refusing to send the packet.
Use RFC 2292 macros for alignment + size calculation.
Fix trac#327
Signed-off-by: Gert Doering <gert@greenie.muc.de> Lazy-Ack-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1390164697-1590-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8250
Arne Schwabe [Fri, 28 Mar 2014 10:07:01 +0000 (11:07 +0100)]
Fix man page and OSCP script: tls_serial_{n} is decimal
Commit 7d5e26cbb53 fixed extracting serial but did not change the format,
which always has been decimal. This patch fixes the manpage and
OSCP.sh script to conform with the implementation. Acked-by: James Yonan <james@openvpn.net> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1396001222-5033-1-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8409
Add support for elliptic curve diffie-hellmann key exchange (ECDH)
This patch is based on Jan Just Keijser's patch from Feb 7, 2012.
When OpenSSL 1.0.2+ or PolarSSL is used, lets the crypto library do the
heavy lifting. For OpenSSL builds, if a user specifies a curve using
--ecdh-curve, it first tries to override automatic selection using that
curve.
For older OpenSSL, tries the following things (in order of preference):
* When supplied, use the ecdh curve specified by the user.
* Try to extract the curve from the private key, use the same curve.
* Fall back on secp384r1 curve.
Note that although a curve lookup might succeed, OpenSSL 1.0.0 and older do
*not* support TLSv1.1 or TLSv1.2, which means no that no EC-crypto can be
used.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <53597BEA.6080408@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8625 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Sun, 20 Apr 2014 18:41:01 +0000 (20:41 +0200)]
Minor t_client.sh cleanups
- remove built tests/t_client.sh script on "make clean"
- ignore Linux iproute2 "ssthresh <n>" output that sometimes shows up
in "ip -6 route show" and breaks before/after comparison
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1398019261-30180-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8557
Gert Doering [Sun, 13 Apr 2014 11:12:02 +0000 (13:12 +0200)]
IPv6 address/route delete fix for Win8
Use "store=active" for IPv6 address and route deletion - seems to be
required on Windows 8 and up, and not doing it will break OpenVPN
reconnection (old addresses are not properly deleted, thus address can
not be configured on connect).
Yawning Angel [Mon, 10 Mar 2014 03:47:58 +0000 (03:47 +0000)]
Fix SOCKSv5 method selection
So, RFC 1928 doesn't say anything about the METHODS field in the Method
Selection message being ordered in terms of preference or anything, and
the server is free to pick any of the METHODS offered by the client.
Always sending a Method Selection message with NO AUTHENTICATION REQUIRED
and USERNAME/PASSWORD set is broken on two fronts:
* If the OpenVPN client can't handle the server picking USERNAME/PASSWORD
due to the credentials being missing, it shouldn't offer it to the
server.
* If the OpenVPN client has credentials, then it should always attempt to
authenticate. This is a security product. "You can misconfigure it and
it will work" is not acceptable. Setting a username/password when the
SOCKS server doesn't require/support that as an option is the user not
configuring it correctly, and should be treated as such.
Also verify that the SOCKS server returned the auth that was requested.
URL: https://github.com/OpenVPN/openvpn/pull/14
Fix trac #377, trac #148 Acked-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <20140413130102.GR16637@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8488
Arne Schwabe [Mon, 7 Apr 2014 20:12:05 +0000 (22:12 +0200)]
Work around Solaris getaddrinfo() returing ai_protocol=0
Create_socket() and sub-functions assume that the ai_protocol value
returned by getaddrinfo() is IPPROTO_UDP or IPPROTO_TCP. On Solaris,
it is "0", because Solaris's socket() call will then "select the right
protocol" - but it breaks our code. So remove ASSERT()s on ai_protocol,
and also accept properly set ai_socktype (SOCK_DGRAM/SOCK_STREAM) values
if ai_protocol is not set.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Signed-off-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <20140407201711.GN16637@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8428
Gert Doering [Sun, 30 Mar 2014 12:09:36 +0000 (14:09 +0200)]
Fix crash when using --inetd.
Change "local" argument to socket_do_listen() to avoid calling
"local->ai_addr" in the caller for the "do_listen == FALSE" case,
in which case it could be NULL.
Also, ensure "ai" is always initialized in socket_listen_accept() for
the "!remote_dynamic" case - otherwise it will sometimes(!) crash in
addrlist_match() later on.
Get rid of spurious operator precedence warning concerning
GETADDR_CACHE_MASK.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1396181376-32022-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8412
Steffan Karger [Sun, 23 Mar 2014 13:07:47 +0000 (14:07 +0100)]
configure.ac: check for SSL_OP_NO_TICKET flag in OpenSSL
SSL_OP_NO_TICKET tells OpenSSL to disable "stateless session resumption".
This is something we do not want nor need, but could potentially be used
for a future attack. OpenVPN 2.4 requires the flag to be set and will fail
configure if the flag is not present. Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <CAA1AbxJh17KYmVU1BVa5kp4iJsUJT+xnXp0rVU_3g3c5hPnqDQ@mail.gmail.com>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8389
Steffan Karger [Sat, 1 Mar 2014 14:36:15 +0000 (15:36 +0100)]
Disable unsupported TLS cipher modes by default, cleans --show-tls output.
This explicitly disables a number of tls ciphers that OpenVPN has currently
no support for. OpenSSL will automatically detect this during negotiation,
but --show-tls would erroneously show a number of unsupported ciphers.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1393684575-28112-3-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8318 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Steffan Karger [Sun, 23 Mar 2014 13:53:01 +0000 (14:53 +0100)]
Bump minimum OpenSSL version to 0.9.8
OpenSSL 0.9.7 and older are considered obsolete (see
http://www.openssl.org/news/news.html). This patch updates configure.ac to
require OpenSSL 0.9.8 or newer, and removes a number of #ifdefs that are
now no longer needed.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1395582781-27966-1-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8392 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Arne Schwabe [Fri, 21 Mar 2014 13:18:36 +0000 (14:18 +0100)]
Workaround broken Android 4.4 VpnService API for persist-tun mode
In Android 4.4 it is not possible to open a new tun device and then close
the old tun device without breaking the whole VPNService stack until the
device is rebooted.
Add new management method to ask the UI what method should be taken to
ensure the optimal solution for the situation. Then do open-before-close
or close-before-open inside open_tun() as requested.
Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1395407925-25518-4-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8373
Arne Schwabe [Fri, 21 Mar 2014 13:18:34 +0000 (14:18 +0100)]
Fix connecting to localhost on Android
Do not protect the link socket when connecting to localhost. Also only
call the protect function on valid socket Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1395407925-25518-2-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8375
However, even with the above code, stateless session resumption
is still possible unless explicitly disabled with the
SSL_OP_NO_TICKET flag. This patch does this.
Heiko Hund [Tue, 18 Feb 2014 17:59:55 +0000 (18:59 +0100)]
grow route lists dynamically
This removes the need for the --max-routes option. Instead of
allocating a fixed size array for the route(-option)s they are
managed in linked lists instead.
Signed-off-by: Heiko Hund <heiko.hund@sophos.com> Acked-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1392746395-19246-1-git-send-email-heiko.hund@sophos.com>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8295 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Mon, 13 Jan 2014 21:54:34 +0000 (22:54 +0100)]
Replace copied structure elements with including <net/route.h>
The code for FreeBSD, Dragonfly, OpenBSD and NetBSD contained copies
of structures from <net/route.h> (struct rt_msghdr in particular).
OpenBSD changed some structure elements, making OpenVPN incompatible,
depending on the specific OpenBSD version. Clean up: remove copied
definitions, replace by including <net/route.h> directly - this could
not be done originally due to a conflict with "struct route" in OpenVPN
and <net/route.h>, cleaned up by the previous commit.
Tested on FreeBSD 9.1-RELEASE, NetBSD 5.1, OpenBSD 4.9 (route.c compiles
with no warnings, and "openvpn --show-gateway" works, which is the only
part of the code that uses the structures in question).
Fix trac #340
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1389650074-18455-2-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8230
Gert Doering [Fri, 10 Jan 2014 16:25:42 +0000 (17:25 +0100)]
Cleanup ir6->netbits handling.
Get rid of all "if (ir6->netbits>=0)" checks, as those are always true
(unlike ir->netbits for IPv4, we don't do the special case for "if it's
a host, put -1 in there" for IPv6).
Merge mroute_helper_{add,del}_iroute and mroute_helper_{add,del}_iroute6
into unified mroute_helper_{add,del}_iroute46() function as they did the
same thing anyway, just with slightly different parameters.
Make Arne happy.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1389371142-26705-2-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8198
Gert Doering [Sun, 17 Nov 2013 14:30:20 +0000 (15:30 +0100)]
Make code and documentation for --remote-random-hostname consistent.
Documentation examples, description and code were disagreeing on what
this option actually does. Now they will all agree that it will
*prepend* a random-byte string to the hostname name before resolving
to work around DNS caching (needs a "*" wildcard record in the zone).
Fix trac #143
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1384698620-27946-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/7999
Jens Wagner [Tue, 7 Jan 2014 21:07:54 +0000 (22:07 +0100)]
Fix spurious ignoring of pushed config options (trac#349).
The function incoming_push_message(...) in push.c uses a local variable
option_types_found, that gets passed to do_up(...).
If the server push got split into several parts, only the last part
(PUSH_MSG_REPLY) option_types_found is used for do_up (initilized as 0
locally), the previous ones (PUSH_MSG_CONTINUATION) are ignored.
So e.g. a ping config, pushed by the server in the first push, followed
by a lot of "push route" configs, causing a second push message, will
have the do_up() called, but without e.g. the OPT_P_TIMER flag, so those
options will be silently ignored.
The patch resolves that, by introducing "push_option_types_found" in
"c->options" and using that as storage.
Fix trac bug #349.
Acked-by: Gert Doering <gert@greenie.muc.de>
URL: https://community.openvpn.net/openvpn/ticket/349 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Wed, 1 Jan 2014 21:57:59 +0000 (22:57 +0100)]
Provide LZ4 sources in src/compat/ and use if no system lz4 library found.
Bundle lz4.c and lz4.h from http://code.google.com/p/lz4/ (r109) as
src/compat/compat-lz4.[ch], and use that (via #define NEED_COMPAT_LZ4)
if autoconf cannot find lz4.h or -llz4 in the system.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1388613479-22377-2-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8154
Gert Doering [Wed, 1 Jan 2014 21:57:58 +0000 (22:57 +0100)]
Implement LZ4 compression.
Implement LZ4 compression, similar to the existing snappy / push-peer-info
model: a LZ4 capable client will send IV_LZ4=1 to the server, and the
algorithm is selected by pushing "compress lz4" back.
LZ4 does not compress as well as LZO or Snappy, but needs far less CPU
and is much faster, thus better suited for mobile devices. See
https://code.google.com/p/lz4/ for more details.
LZ4 include and library path can be specified by specifying LZ4_LIBS=...
and LZ4_CFLAGS=... on the configure command line.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1388613479-22377-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8153
Steffan Karger [Wed, 1 Jan 2014 20:10:26 +0000 (21:10 +0100)]
Disable export ciphers by default for OpenSSL builds.
Export ciphers are deliberately weak ciphers, and not fully supported by
OpenVPN since ephemeral RSA support has been removed a few commits ago.
This commit removes them from the default cipher list to avoid confusion.
PolarSSL does not support export ciphers, so no action required there.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1388607026-12297-7-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8146 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Steffan Karger [Wed, 1 Jan 2014 20:10:24 +0000 (21:10 +0100)]
Remove OpenSSL tmp_rsa_callback. Removes support for ephemeral RSA in TLS.
This code would not really generate ephemeral keys every time it is called,
but a single key that would be reused during process lifetime and returned
each time the function was called; probably not what users would expect.
TLS allowes ephemeral keys to be used only when no other key exchange, such
as (ephemeral) Diffie-Hellman, is performed. The end result is that it was
only used by a number of (weak) export ciphers, which could give users a
false sense of security.
So, instead of fixing a weak cipher mode, we'll just remove support for it
completely. Plenty of better alternatives are available in TLS.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1388607026-12297-5-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8152 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Steffan Karger [Wed, 1 Jan 2014 20:10:22 +0000 (21:10 +0100)]
Update TLSv1 error messages to SSLv23 to reflect changes from commit 4b67f98
Commit 4b67f98 changed call to TLSv1_{client,server}_method() to
SSLv23_{client,server}_method(), this commit updates the corresponding
error messages to match the changes in the code.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1388607026-12297-3-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8147 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Steffan Karger [Wed, 1 Jan 2014 20:10:21 +0000 (21:10 +0100)]
Also update TLSv1_method() calls in support code to SSLv23_method() calls.
Commit 4b67f98 changed calls to TLSv1_{sever,client}_method() to
SSLv23_{client,server}_method() to enable TLS version negotiation. This
commit does the same for two calls of TLSv1_method() from support code.
Signed-off-by: Steffan Karger <steffan@karger.me> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1388607026-12297-2-git-send-email-steffan@karger.me>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8148 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Arne Schwabe [Tue, 17 Dec 2013 10:22:47 +0000 (11:22 +0100)]
Add warning for using connection block variables after connection blocks
In 2.3 some options that were allowed only in global config before have
been moved to connection blocks. This changes the behaviour if the
variables were defined after connection block. This patch adds a warning
to catch these mistakes.
Also let warnings errors show [CONNECTION-OPTIONS] instead of [CMD-LINE]
for connection blocks Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1387275767-10303-1-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8117
David Sommerseth [Mon, 25 Nov 2013 12:32:58 +0000 (13:32 +0100)]
Fix file checks when --chroot is being used
Commit 0f2bc0dd92f43c9 started to introduce some file sanity
checking before OpenVPN started to avoid harder to explain issues
due to missing files or directories later on. But that commit
did not consider --chroot at all. Which would basically cause
OpenVPN to complain on non-missing files, because it would not
consider that the files where inside a chroot.
This patch is based on the thoughts in a patch by Josh Cepek [1],
but trying to simplify it at bit.
Gert Doering [Sat, 30 Nov 2013 21:38:28 +0000 (22:38 +0100)]
Fix IPv6_V6ONLY logic.
The "ipv6only" setsockopt logic introduced by 8832c6c4cf was inverted,
fix. Also add a msg() to show what value is set, as that makes strange
v4/v6 connectivity problems much easier to spot.
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1385847508-32248-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8079
Arne Schwabe [Mon, 25 Nov 2013 12:31:18 +0000 (13:31 +0100)]
Implement listing on IPv4/IPv6 dual socket on all platform
With this patch OpenVPN will listen on Ipv4 as well as IPv6 when an IPv6
socket is used. Using bind ipv6only will disable this behavior Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-7-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8052
Arne Schwabe [Mon, 25 Nov 2013 12:31:17 +0000 (13:31 +0100)]
Implement dual stack client support for OpenVPN
This patch contains a number of changes. I did not further spit this since some changes make only sense being changed together.
Always use connection_list, simplifies the reconnection logic.
Change meaning of --connect-retry-max and --connect-retry to be used
all connections. This now allows OpenVPN to quit after n unsuccessful
udp connection attempts
Remove the tcp reconnection logic. Failing a TCP connection will now
cause a USR1 like a UDP connection. Also extend sig->source from bool to
int to specify signal source. This allows a finer grained reconnection
logic if necessary in the future.
Dual-Stack support: if an address resolves to multiple records each
address is tried in sequential order. Then proceed to next connection
entry. Introduce the field current_remote to represent the current
connecting remote. Also change some fields to struct addrinfo* form
openvn_addr to store multiple addresses needed for the dual stack support.
Change meaning from udp and tcp to allow both IPv4 and IPv6. Introducue
new udp4 and tcp4 to force IPv4.
Signed-off-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-6-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8058
Signed-off-by: Gert Doering <gert@greenie.muc.de>
Message-ID: <20131129194258.GL161@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8071
Arne Schwabe [Mon, 25 Nov 2013 12:31:15 +0000 (13:31 +0100)]
change the type of 'remote' to addrinfo*, and rename to 'remote_list'.
Warning: this is work in progress, preparing for the full dual-stack
client patch. With this commit in place, connecting via "--proto udp" or
"--proto tcp-client" to a host that has IPv4+IPv6 in place, on an OS that
will prefer IPv6 to IPv4 will always fail. The remote_list will have IPv6
in it's first entry, while the socket will try to do AF_INET, and that
will not work. This will be fixed by the upcoming change to handle
multiple remote IP addresses (as returned by getaddrinfo()) as multiple
<connection> blocks, with appropriate retry and AF selection logic.
Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-4-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8053
Arne Schwabe [Mon, 25 Nov 2013 12:31:14 +0000 (13:31 +0100)]
Remove the ip-remote-hint option.
The ip-remote-hint option overrides the remote hostname of every
remote/connection entry unless management-query-remote is also defined and
the management interfaces overrides the option with remote MOD.
The remote name is even overridden when when management interface issues
remote ACCEPT after being presented with the non overridden remote.
Overriding all remote options can also be done by management-query-remote
and issuing remote MOD or by changing alll remote statements in the
configuration.
Also: remove unused variable newcycle
Signed-off-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-3-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8057 Signed-off-by: Gert Doering <gert@greenie.muc.de>
Arne Schwabe [Mon, 25 Nov 2013 12:31:13 +0000 (13:31 +0100)]
Change proto_remote() function to return a constant string
Instead of using the implicit protocol string that is returned by the
proto/af to names function return a constant string. The strings have
become part of the wire protocl and we do not want them to change if
the printing of proto/af changes.
Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-2-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8055
Arne Schwabe [Mon, 25 Nov 2013 12:31:12 +0000 (13:31 +0100)]
Split link_socket_init_phase1 and link_socket_init_phase2 into
smaller more managable/readable functions. No functional changes
Signed-off-by: Arne Schwabe <arne@rfc2549.org> Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385382680-5912-1-git-send-email-arne@rfc2549.org> Signed-off-by: Gert Doering <gert@greenie.muc.de>
Gert Doering [Sun, 24 Nov 2013 16:13:04 +0000 (17:13 +0100)]
t_client.sh: ignore fields from "ip -6 route show" output that distort results.
"ip -6 route show" prints stuff like "rtt 38ms rttvar 38ms cwnd 10", which
sometimes changes while an OpenVPN test is running, resulting in spurious
failures in the "ifconfig/route must be restored identically after
OpenVPN ends" test in t_client.sh. Not all fields are there all the time,
so use "sed" to get rid of whatever is printed this time.
Only relevant for "make check" on linux builds with "--enable-iproute2".
Signed-off-by: Gert Doering <gert@greenie.muc.de> Acked-by: Arne Schwabe <arne@rfc2549.org>
Message-Id: <1385309584-23209-1-git-send-email-gert@greenie.muc.de>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8047
Arne Schwabe [Thu, 21 Nov 2013 20:08:07 +0000 (21:08 +0100)]
Fix two instances of asserting AF_INET
The http-proxy and socks-proxy work fine with IPv6 but assert having IPv4 Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <1385064495-25877-6-git-send-email-arne@rfc2549.org>
URL: http://article.gmane.org/gmane.network.openvpn.devel/8010
projects / thirdparty / openvpn.git / log
