Replace the big fat memset that requires saving and restoring various
fields with just initializing those fields that need initialization.
All the clearing to 0 is moved to scsi_prepare_cmd() as scsi_ioctl_reset()
alreadly uses kzalloc() to allocate a pre-zeroed command.
This is still conservative and can probably be optimized further.
Link: https://lore.kernel.org/r/20220224175552.988286-3-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: dce5c4afd035 ("scsi: core: Clear driver private data when retrying request") Signed-off-by: Sasha Levin <sashal@kernel.org>
Pass down struct ovl_fs to all creation helpers so we can ultimately
retrieve the relevant upper mount and take the mount's idmapping into
account when creating new filesystem objects. This is needed to support
idmapped base layers with overlay.
Cc: <linux-unionfs@vger.kernel.org> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: c84e125fff26 ("ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up") Signed-off-by: Sasha Levin <sashal@kernel.org>
Use helpers ovl_*xattr() to access user/trusted.overlay.* xattrs
and use helpers ovl_do_*xattr() to access generic xattrs. This is a
preparatory patch for using idmapped base layers with overlay.
Note that a few of those places called vfs_*xattr() calls directly to
reduce the amount of debug output. But as Miklos pointed out since
overlayfs has been stable for quite some time the debug output isn't all
that relevant anymore and the additional debug in all locations was
actually quite helpful when developing this patch series.
Cc: <linux-unionfs@vger.kernel.org> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: c84e125fff26 ("ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a DCT QP is created on an active lag, it's dctc.port is assigned
in a round-robin way, which is from 1 to dev->lag_port. In this case
when querying this QP, we may get qp_attr.port_num > 2.
Fix this by setting qp->port when modifying a DCT QP, and read port_num
from qp->port instead of dctc.port when querying it.
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1] Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2] Reported-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Patrick Bellasi <derkling@google.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dma_map_single is using physical/bus device (DMA) but dma_unmap_single
is using framework device(NAND controller), which is incorrect.
Fixed dma_unmap_single to use correct physical/bus device.
Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Cc: stable@vger.kernel.org Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In [1] it was reported that the acct(2) system call can be used to
trigger NULL deref in cases where it is set to write to a file that
triggers an internal lookup. This can e.g., happen when pointing acc(2)
to /sys/power/resume. At the point the where the write to this file
happens the calling task has already exited and called exit_fs(). A
lookup will thus trigger a NULL-deref when accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op") Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/ Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme_validate_passthru_nsid() logs an err message whose format string is
split over 2 lines. There is a missing space between the two pieces,
resulting in log lines like "... does not match nsid (1)of namespace".
Add the missing space between ")" and "of". Also combine the format
string pieces onto a single line to make the err message easier to grep.
Fixes: e7d4b5493a2d ("nvme: factor out a nvme_validate_passthru_nsid helper") Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd9138 ("power: Add support for DA9150 Fuel-Gauge") Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb6c ("flow_dissector: Fix to use new variables for port ranges in bpf hook") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Brad Spengler reported the list_del() corruption splat in
gtp_net_exit_batch_rtnl(). [0]
Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns
dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl()
to destroy devices in each netns as done in geneve and ip tunnels.
However, this could trigger ->dellink() twice for the same device during
->exit_batch_rtnl().
Say we have two netns A & B and gtp device B that resides in netns B but
whose UDP socket is in netns A.
1. cleanup_net() processes netns A and then B.
2. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns A's gn->gtp_dev_list and calls ->dellink().
[ device B is not yet unlinked from netns B
as unregister_netdevice_many() has not been called. ]
3. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns B's for_each_netdev() and calls ->dellink().
gtp_dellink() cleans up the device's hash table, unlinks the dev from
gn->gtp_dev_list, and calls unregister_netdevice_queue().
Basically, calling gtp_dellink() multiple times is fine unless
CONFIG_DEBUG_LIST is enabled.
Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and
delegate the destruction to default_device_exit_batch() as done
in bareudp.
syzkaller reported a use-after-free in geneve_find_dev() [0]
without repro.
geneve_configure() links struct geneve_dev.next to
net_generic(net, geneve_net_id)->geneve_list.
The net here could differ from dev_net(dev) if IFLA_NET_NS_PID,
IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set.
When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally
calls unregister_netdevice_queue() for each dev in the netns,
and later the dev is freed.
However, its geneve_dev.next is still linked to the backend UDP
socket netns.
Then, use-after-free will occur when another geneve dev is created
in the netns.
Let's call geneve_dellink() instead in geneve_destroy_tunnels().
[0]:
BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline]
BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343
Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441
The buggy address belongs to the object at ffff000054d6e000
which belongs to the cache kmalloc-cg-4k of size 4096
The buggy address is located 3620 bytes inside of
freed 4096-byte region [ffff000054d6e000, ffff000054d6f000)
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/ Fixes: ff31e105464d ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Since EP0 transactions need to be completed before the controller halt
sequence is finished, this may take some time depending on the host and the
enabled functions. Increase the controller halt timeout, so that we give
the controller sufficient time to handle EP0 transfers.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: d3a8c28426fc ("usb: dwc3: Fix timeout issue during controller enter/exit from halt state") Signed-off-by: Sasha Levin <sashal@kernel.org>
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held)
Cc: stable@vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with
flexible-array members") changed various structures from using 0-length
arrays to flexible arrays
net/batman-adv/bat_v_elp.c: note: in included file:
./include/linux/ethtool.h:148:38: warning: nested flexible array
net/batman-adv/bat_v_elp.c:128:9: warning: using sizeof on a flexible structure
In theory, this could be worked around by using {} as initializer for the
variable on the stack. But this variable doesn't has to be initialized at
all by the caller of __ethtool_get_link_ksettings - everything will be
initialized by the callee when no error occurs.
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Stable-dep-of: 8c8ecc98f5c6 ("batman-adv: Drop unmanaged ELP metric worker") Signed-off-by: Sasha Levin <sashal@kernel.org>
Now we keep a reference to the active fh for any call to uvc_ctrl_set,
regardless if it is an actual set or if it is a just a try or if the
device refused the operation.
We should only keep the file handle if the device actually accepted
applying the operation.
Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Suggested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-1-26c867231118@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid using the iterators after the list_for_each() constructs.
This patch should be a NOP, but makes cocci, happier:
drivers/media/usb/uvc/uvc_ctrl.c:1861:44-50: ERROR: invalid reference to the index variable of the iterator on line 1850
drivers/media/usb/uvc/uvc_ctrl.c:2195:17-23: ERROR: invalid reference to the index variable of the iterator on line 2179
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d9fecd096f67 ("media: uvcvideo: Only save async fh if success") Signed-off-by: Sasha Levin <sashal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230925095532.1984344-15-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: c9c0036c1990 ("soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove") Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver does exactly devm_clk_get() and clk_prepare_enable() right
after, which is exactly what devm_clk_get_enabled() does: clean that
up by switching to the latter.
On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.
Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.
Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com Fixes: 236e9f153852 ("kfence: skip all GFP_ZONEMASK allocations") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Alexander Potapenko <glider@google.com> Cc: Chistoph Lameter <cl@linux.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Out-of-bounds accesses that aren't caught by a guard page will result in
corruption of canary memory. In pathological cases, where an object has
certain alignment requirements, an out-of-bounds access might never be
caught by the guard page. Such corruptions, however, are only detected on
kfree() normally. If the bug causes the kernel to panic before kfree(),
KFENCE has no opportunity to report the issue. Such corruptions may also
indicate failing memory or other faults.
To provide some more information in such cases, add the option to check
canary bytes on panic. This might help narrow the search for the panic
cause; but, due to only having the allocation stack trace, such reports
are difficult to use to diagnose an issue alone. In most cases, such
reports are inactionable, and is therefore an opt-in feature (disabled by
default).
[akpm@linux-foundation.org: add __read_mostly, per Marco] Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Suggested-by: chenzefeng <chenzefeng2@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Wangbing <wangbing6@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e64f81946adf ("kfence: skip __GFP_THISNODE allocations on NUMA systems") Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow the use of a deferrable timer, which does not force CPU wake-ups
when the system is idle. A consequence is that the sample interval
becomes very unpredictable, to the point that it is not guaranteed that
the KFENCE KUnit test still passes.
Nevertheless, on power-constrained systems this may be preferable, so
let's give the user the option should they accept the above trade-off.
Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: e64f81946adf ("kfence: skip __GFP_THISNODE allocations on NUMA systems") Signed-off-by: Sasha Levin <sashal@kernel.org>
The above transcript shows that ACPI pointed a 16 MiB buffer for the log
events because RSI maps to the 'order' parameter of __alloc_pages_noprof().
Address the bug by moving from devm_kmalloc() to devm_add_action() and
kvmalloc() and devm_add_action().
Since the bios event log is freed in the device release function,
let devres handle the deallocation. This will allow other memory
allocation/mapping functions to be used for the bios event log.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: a3a860bc0fd6 ("tpm: Change to kvalloc() in eventlog/acpi.c") Signed-off-by: Sasha Levin <sashal@kernel.org>
Most SoC dtsi files have the display output interfaces disabled by
default, and only enabled on boards that utilize them. The MT8183
has it backwards: the display outputs are left enabled by default,
and only disabled at the board level.
Reverse the situation for the DSI output so that it follows the
normal scheme. For ease of backporting the DPI output is handled
in a separate patch.
My static checker rule complains about this code. The concern is that
if "sample_space" is negative then the "sample_space >= runtime->channels"
condition will not work as intended because it will be type promoted to a
high unsigned int value.
strm->fifo_sample_size is SSI_FIFO_DEPTH (32). The SSIFSR_TDC_MASK is
0x3f. Without any further context it does seem like a reasonable warning
and it can't hurt to add a check for negatives.
Cc: stable@vger.kernel.org Fixes: 03e786bd4341 ("ASoC: sh: Add RZ/G2L SSIF-2 driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/e07c3dc5-d885-4b04-a742-71f42243f4fd@stanley.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code for detecting and updating the connector status in
cdn_dp_pd_event_work() has a number of problems.
- It does not aquire the locks to call the detect helper and update
the connector status. These are struct drm_mode_config.connection_mutex
and struct drm_mode_config.mutex.
- It does not use drm_helper_probe_detect(), which helps with the
details of locking and detection.
- It uses the connector's status field to determine a change to
the connector status. The epoch_counter field is the correct one. The
field signals a change even if the connector status' value did not
change.
Replace the code with a call to drm_connector_helper_hpd_irq_event(),
which fixes all these problems.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 81632df69772 ("drm/rockchip: cdn-dp: do not use drm_helper_hpd_irq_event") Cc: Chris Zhong <zyw@rock-chips.com> Cc: Guenter Roeck <groeck@chromium.org> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241105133848.480407-1-tzimmermann@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The drm_helper_hpd_irq_event() function is iterating over all the
connectors when an hotplug event is detected.
During that iteration, it will call each connector detect function and
figure out if its status changed.
Finally, if any connector changed, it will notify the user-space and the
clients that something changed on the DRM device.
This is supposed to be used for drivers that don't have a hotplug
interrupt for individual connectors. However, drivers that can use an
interrupt for a single connector are left in the dust and can either
reimplement the logic used during the iteration for each connector or
use that helper and iterate over all connectors all the time.
Since both are suboptimal, let's create a helper that will only perform
the status detection on a single connector.
On 32bit systems the addition operations in ipc_msg_alloc() can
potentially overflow leading to memory corruption.
Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.
Link: https://lkml.kernel.org/r/20241224025238.3768787-1-chenridong@huaweicloud.com Fixes: 9cbb78bb3143 ("mm, memcg: introduce own oom handler to iterate only over its own threads") Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of the mark_victim tracepoint provides only the
process ID (pid) of the victim process. This limitation poses challenges
for userspace tools requiring real-time OOM analysis and intervention.
Although this information is available from the kernel logs, it’s not
the appropriate format to provide OOM notifications. In Android, BPF
programs are used with the mark_victim trace events to notify userspace of
an OOM kill. For consistency, update the trace event to include the same
information about the OOMed victim as the kernel logs.
- UID
In Android each installed application has a unique UID. Including
the `uid` assists in correlating OOM events with specific apps.
- Process Name (comm)
Enables identification of the affected process.
- OOM Score
Will allow userspace to get additional insight of the relative kill
priority of the OOM victim. In Android, the oom_score_adj is used to
categorize app state (foreground, background, etc.), which aids in
analyzing user-perceptible impacts of OOM events [1].
- Total VM, RSS Stats, and pgtables
Amount of memory used by the victim that will, potentially, be freed up
by killing it.
[1] https://cs.android.com/android/platform/superproject/main/+/246dc8fc95b6d93afcba5c6d6c133307abb3ac2e:frameworks/base/services/core/java/com/android/server/am/ProcessList.java;l=188-283 Signed-off-by: Carlos Galo <carlosgalo@google.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ade81479c7dd ("memcg: fix soft lockup in the OOM process") Signed-off-by: Sasha Levin <sashal@kernel.org>
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35da ("media: imx-jpeg: Ensure power suppliers be suspended before detach them") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
* some test vectors in commit 79e6e2f3f3ff ("crypto: testmgr - populate
RSA CRT parameters in RSA test vectors") had misplaced commas, which
break the test and trigger KASAN warnings at least on x86-64
* pkcs1pad test vector did not have its CRT parameters
Fixes: 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors") Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes from v1:
* replace some accidental spaces with tabs
In commit f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem
for faster private key operations") we have started to use the additional
primes and coefficients for RSA private key operations. However, these
additional parameters are not present (defined as 0 integers) in the RSA
test vectors.
Some parameters were borrowed from OpenSSL, so I was able to find the
source. I could not find the public source for 1 vector though, so had to
recover the parameters by implementing Appendix C from [1].
According to PKCS#1 standard, the 'otherPrimeInfos' field contains
the information for the additional primes r_3, ..., r_u, in order.
It shall be omitted if the version is 0 and shall contain at least
one instance of OtherPrimeInfo if the version is 1, see:
https://www.rfc-editor.org/rfc/rfc3447#page-44
Replace the version number '1' with 0, otherwise, some drivers may
not pass the run-time tests.
Signed-off-by: lei he <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.
The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.
Export the key to file and run the following command to verify the
fix result:
openssl asn1parse -inform DER -in /path/to/key/file
Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix wrong test data at testmgr.h, it seems to be caused
by ignoring the last '\0' when calling sizeof.
Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Catalin Marinas [Thu, 20 Feb 2025 15:58:01 +0000 (15:58 +0000)]
arm64: mte: Do not allow PROT_MTE on MAP_HUGETLB user mappings
PROT_MTE (memory tagging extensions) is not supported on all user mmap()
types for various reasons (memory attributes, backing storage, CoW
handling). The arm64 arch_validate_flags() function checks whether the
VM_MTE_ALLOWED flag has been set for a vma during mmap(), usually by
arch_calc_vm_flag_bits().
Linux prior to 6.13 does not support PROT_MTE hugetlb mappings. This was
added by commit 25c17c4b55de ("hugetlb: arm64: add mte support").
However, earlier kernels inadvertently set VM_MTE_ALLOWED on
(MAP_ANONYMOUS | MAP_HUGETLB) mappings by only checking for
MAP_ANONYMOUS.
Explicitly check MAP_HUGETLB in arch_calc_vm_flag_bits() and avoid
setting VM_MTE_ALLOWED for such mappings.
Fixes: 9f3419315f3c ("arm64: mte: Add PROT_MTE support to mmap() and mprotect()") Cc: <stable@vger.kernel.org> # 5.10.x-6.12.x Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
This commit re-attempts the backport of the change to the linux-5.15.y
branch. Commit 214d92f0a465 ("btrfs: avoid monopolizing a core when
activating a swap file") on this branch was reverted.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The backport for linux-5.15.y, commit 214d92f0a465 ("btrfs: avoid
monopolizing a core when activating a swap file"), inserted
cond_resched() in the wrong location.
Revert it now; a subsequent commit will re-backport the original patch.
Fixes: 214d92f0a465 ("btrfs: avoid monopolizing a core when activating a swap file") # linux-5.15.y Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).
Make sure it's turned off if it isn't going to be used.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhkelley@outlook.com> Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should wait all existing dio write IOs before block removal,
otherwise, previous direct write IO may overwrite data in the
block which may be reused by other inode.
Cc: stable@vger.kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Alva Lan <alvalan9@foxmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A bus_dma_limit was added for l3 bus by commit cfb5d65f2595
("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue
observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE
enabled.
Since kernel 5.13, the SATA issue can be reproduced again following
the SATA node move from L3 bus to L4_cfg in commit 8af15365a368
("ARM: dts: Configure interconnect target module for dra7 sata").
Fix it by adding an empty dma-ranges property to l4_cfg and
segment@100000 nodes (parent device tree node of SATA controller) to
inherit the 2GB dma ranges limit from l3 bus node.
Note: A similar fix was applied for PCIe controller by commit 90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe").
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI function 2 on ASIX AX99100 PCIe to Multi I/O Controller can be
configured as a single-port parallel port controller. The subvendor id
is 0x2000 when configured as parallel port. It supports IEEE-1284 EPP /
ECP with its ECR on BAR1.
Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O
Controller can be configured as a single-port serial port controller.
The subvendor id is 0x1000 when configured as serial port and MSI
interrupts are supported.
Move PCI Vendor and Device ID of ASIX AX99100 PCIe to Multi I/O
Controller to pci_ids.h for its serial and parallel port driver
support in subsequent patches.
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20230724083933.3173513-3-jiaqing.zhao@linux.intel.com
[Moeko: Drop changes in drivers/net/can/sja1000/ems_pci.c] Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion] Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption") Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion] Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7 Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422 Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption") Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After detecting file system corruption and degrading to a read-only mount,
dirty folios and buffers in the page cache are cleared, and a large number
of warnings are output at that time, often filling up the kernel log.
In this case, since the degrading to a read-only mount is output to the
kernel log, these warnings are not very meaningful, and are rather a
nuisance in system management and debugging.
The related nilfs2-specific page/folio routines have a silent argument
that suppresses the warning output, but since it is not currently used
meaningfully, remove both the silent argument and the warning output.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion] Link: https://lkml.kernel.org/r/20240816090128.4561-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ca76bb226bf4 ("nilfs2: do not force clear folio if buffer is referenced") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__static_call_update_early() has a check for early_boot_irqs_disabled, but
is used before early_boot_irqs_disabled is set up in start_kernel().
Xen PV has always special cased early_boot_irqs_disabled, but Xen PVH does
not and falls over the BUG when booting as dom0.
It is very suspect that early_boot_irqs_disabled starts as 0, becomes 1 for
a time, then becomes 0 again, but as this needs backporting to fix a
breakage in a security fix, dropping the BUG_ON() is the far safer option.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219620 Reported-by: Alex Zenla <alex@edera.dev> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alex Zenla <alex@edera.dev> Link: https://lore.kernel.org/r/20241221211046.6475-1-andrew.cooper3@citrix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is allowed for consoles to not provide a write() callback. For
example ttynull does this.
Check if a write() callback is available before using it.
Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230717194607.145135-2-john.ogness@linutronix.de Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").
The driver does not touch the irqstatus register when it is disabling
interrupts. This might cause an interrupt to trigger for an interrupt
that was just disabled.
To fix the issue, clear the irqstatus registers right after disabling
the interrupts.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Reported-by: Jonathan Cormier <jcormier@criticallink.com> Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1394222/am625-issue-about-tidss-rcu_preempt-self-detected-stall-on-cpu/5424479#5424479 Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: mostly rewrote the patch] Reviewed-by: Jonathan Cormier <jcormier@criticallink.com> Tested-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-5-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Co-developed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Co-developed-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Tested-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: becbd5850c03 ("neighbour: use RCU protection in __neigh_notify()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch enables the sysctl mtu_expires to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch enables the sysctl min_pmtu to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: dd205fcc33d9 ("ipv4: use RCU protection in rt_is_expired()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdffb ("clocksource: Check per-CPU clock synchronization when marked unstable") Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
