Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin] Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Jann Horn <jannh@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andreas Larsson <andreas@gaisler.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: Jann Horn <jannh@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().
Fixes: c76c6956566f ("mptcp: call tcp_cleanup_rbuf on subflows") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in protocol.c, because commit f410cbea9f3d ("tcp: annotate
data-races around tp->window_clamp") has not been backported to this
version. The conflict is easy to resolve, because only the context is
different, but not the line to modify. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com> Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure the refcount and async_copies fields are initialized early.
cleanup_async_copy() will reference these fields if an error occurs
in nfsd4_copy(). If they are not correctly initialized, at the very
least, a refcount underflow occurs.
Reported-by: Olga Kornievskaia <okorniev@redhat.com> Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations") Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing appears to limit the number of concurrent async COPY
operations that clients can start. In addition, AFAICT each async
COPY can copy an unlimited number of 4MB chunks, so can run for a
long time. Thus IMO async COPY can become a DoS vector.
Add a restriction mechanism that bounds the number of concurrent
background COPY operations. Start simple and try to be fair -- this
patch implements a per-namespace limit.
An async COPY request that occurs while this limit is exceeded gets
NFS4ERR_DELAY. The requesting client can choose to send the request
again after a delay or fall back to a traditional read/write style
copy.
If there is need to make the mechanism more sophisticated, we can
visit that in future patches.
Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Link: https://nvd.nist.gov/vuln/detail/CVE-2024-49974 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when NFSD handles an asynchronous COPY, it returns a
zero write verifier, relying on the subsequent CB_OFFLOAD callback
to pass the write verifier and a stable_how4 value to the client.
However, if the CB_OFFLOAD never arrives at the client (for example,
if a network partition occurs just as the server sends the
CB_OFFLOAD operation), the client will never receive this verifier.
Thus, if the client sends a follow-up COMMIT, there is no way for
the client to assess the COMMIT result.
The usual recovery for a missing CB_OFFLOAD is for the client to
send an OFFLOAD_STATUS operation, but that operation does not carry
a write verifier in its result. Neither does it carry a stable_how4
value, so the client /must/ send a COMMIT in this case -- which will
always fail because currently there's still no write verifier in the
COPY result.
Thus the server needs to return a normal write verifier in its COPY
result even if the COPY operation is to be performed asynchronously.
If the server recognizes the callback stateid in subsequent
OFFLOAD_STATUS operations, then obviously it has not restarted, and
the write verifier the client received in the COPY result is still
valid and can be used to assess a COMMIT of the copied data, if one
is needed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to origin/linux-5.15.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that the Allwinner A100/A133 SoC only supports 8K DMA
blocks (13 bits wide), for both the SD/SDIO and eMMC instances.
And while this alone would make a trivial fix, the H616 falls back to
the A100 compatible string, so we have to now match the H616 compatible
string explicitly against the description advertising 64K DMA blocks.
As the A100 is now compatible with the D1 description, let the A100
compatible string point to that block instead, and introduce an explicit
match against the H616 string, pointing to the old description.
Also remove the redundant setting of clk_delays to NULL on the way.
D1's MMC controllers are unique in that they have the DMA address shift
(like A100) with a 13-bit descriptor size field (like sun4i). Add the
compatible and parameters for this new variant.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220203015112.12008-2-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 85b580afc2c2 ("mmc: sunxi-mmc: Fix A100 compatible description") Signed-off-by: Sasha Levin <sashal@kernel.org>
Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.
This is documented in the datasheet and failures to do so lead to
commands corruption.
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty()
may cause a NULL pointer dereference, or a general protection fault when
KASAN is enabled.
This happens because, since the tracepoint was added in
mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev
regardless of whether the buffer head has a pointer to a block_device
structure.
In the current implementation, nilfs_grab_buffer(), which grabs a buffer
to read (or create) a block of metadata, including b-tree node blocks,
does not set the block device, but instead does so only if the buffer is
not in the "uptodate" state for each of its caller block reading
functions. However, if the uptodate flag is set on a folio/page, and the
buffer heads are detached from it by try_to_free_buffers(), and new buffer
heads are then attached by create_empty_buffers(), the uptodate flag may
be restored to each buffer without the block device being set to
bh->b_bdev, and mark_buffer_dirty() may be called later in that state,
resulting in the bug mentioned above.
Fix this issue by making nilfs_grab_buffer() always set the block device
of the super block structure to the buffer head, regardless of the state
of the buffer's uptodate flag.
For a really damaged superblock, the value of 'i_super.s_blocksize_bits'
may exceed the maximum possible shift for an underlying 'int'. So add an
extra check whether the aforementioned field represents the valid block
size, which is 512 bytes, 1K, 2K, or 4K.
Link: https://lkml.kernel.org/r/20241106092100.2661330-1-dmantipov@yandex.ru Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reported-by: syzbot+56f7cd1abe4b8e475180@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=56f7cd1abe4b8e475180 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints".
This series fixes null pointer dereference bugs that occur when using
nilfs2 and two block-related tracepoints.
This patch (of 2):
It has been reported that when using "block:block_touch_buffer"
tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a
NULL pointer dereference, or a general protection fault when KASAN is
enabled.
This happens because since the tracepoint was added in touch_buffer(), it
references the dev_t member bh->b_bdev->bd_dev regardless of whether the
buffer head has a pointer to a block_device structure. In the current
implementation, the block_device structure is set after the function
returns to the caller.
Here, touch_buffer() is used to mark the folio/page that owns the buffer
head as accessed, but the common search helper for folio/page used by the
caller function was optimized to mark the folio/page as accessed when it
was reimplemented a long time ago, eliminating the need to call
touch_buffer() here in the first place.
So this solves the issue by eliminating the touch_buffer() call itself.
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc.
Fixes: f99e3daf94ff ("KVM: x86: Add Intel PT virtualization work mode") Cc: stable@vger.kernel.org Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101185031.1799556-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When getting the current VPID, e.g. to emulate a guest TLB flush, return
vpid01 if L2 is running but with VPID disabled, i.e. if VPID is disabled
in vmcs12. Architecturally, if VPID is disabled, then the guest and host
effectively share VPID=0. KVM emulates this behavior by using vpid01 when
running an L2 with VPID disabled (see prepare_vmcs02_early_rare()), and so
KVM must also treat vpid01 as the current VPID while L2 is active.
Unconditionally treating vpid02 as the current VPID when L2 is active
causes KVM to flush TLB entries for vpid02 instead of vpid01, which
results in TLB entries from L1 being incorrectly preserved across nested
VM-Enter to L2 (L2=>L1 isn't problematic, because the TLB flush after
nested VM-Exit flushes vpid01).
The bug manifests as failures in the vmx_apicv_test KVM-Unit-Test, as KVM
incorrectly retains TLB entries for the APIC-access page across a nested
VM-Enter.
Opportunisticaly add comments at various touchpoints to explain the
architectural requirements, and also why KVM uses vpid01 instead of vpid02.
All credit goes to Chao, who root caused the issue and identified the fix.
Link: https://lore.kernel.org/all/ZwzczkIlYGX+QXJz@intel.com Fixes: 2b4a5a5d5688 ("KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST") Cc: stable@vger.kernel.org Cc: Like Xu <like.xu.linux@gmail.com> Debugged-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Tested-by: Chao Gao <chao.gao@intel.com> Link: https://lore.kernel.org/r/20241031202011.1580522-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Cc: stable@vger.kernel.org Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-2-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru Fixes: 7909f2bf8353 ("[PATCH 2/2] ocfs2: Implement group add for online resize") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Dmitry Antipov <dmantipov@yandex.ru> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in
alloc_pages_bulk_noprof() when the task is migrated between cpusets.
When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be
¤t->mems_allowed. when first_zones_zonelist() is called to find
preferred_zoneref, the ac->nodemask may be modified concurrently if the
task is migrated between different cpusets. Assuming we have 2 NUMA Node,
when traversing Node1 in ac->zonelist, the nodemask is 2, and when
traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the
ac->preferred_zoneref points to NULL zone.
In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a
allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading
to NULL pointer dereference.
__alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and
commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc
fastpath").
To fix it, check NULL pointer for preferred_zoneref->zone.
Link: https://lkml.kernel.org/r/20241113083235.166798-1-tujinjiang@huawei.com Fixes: 387ba26fb1cb ("mm/page_alloc: add a bulk page allocator") Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Lobakin <alobakin@pm.me> Cc: David Hildenbrand <david@redhat.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
are passed to the kexec/kdump kernel. Only the ima_kexec buffer
experienced incorrect decryption. Debugging identified a bug in
early_memremap_is_setup_data(), where an incorrect range calculation
occurred due to the len variable in struct setup_data ended up only
representing the length of the data field, excluding the struct's size,
and thus leading to miscalculation.
Address a similar issue in memremap_is_setup_data() while at it.
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da5457085 ("ARM: 9089/1: Define kernel physical section start and end") Signed-off-by: Harith George <harith.g@alifsemi.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the pktgen_sample01_simple.sh script, the device variable is uppercase
'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot
enable UDP tx checksum.
In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).
The referenced commits introduced a two-step process for deleting FTEs:
- Lock the FTE, delete it from hardware, set the hardware deletion function
to NULL and unlock the FTE.
- Lock the parent flow group, delete the software copy of the FTE, and
remove it from the xarray.
However, this approach encounters a race condition if a rule with the same
match value is added simultaneously. In this scenario, fs_core may set the
hardware deletion function to NULL prematurely, causing a panic during
subsequent rule deletions.
To prevent this, ensure the active flag of the FTE is checked under a lock,
which will prevent the fs_core layer from attaching a new steering rule to
an FTE that is in the process of deletion.
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: ed5d7788a934 ("netlink: Do not schedule work from sk_destruct") Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The comment before the config of the GPLL3 PLL says that the
PLL should run at 930 MHz. In contrary to this, calculating
the frequency from the current configuration values by using
19.2 MHz as input frequency defined in 'qcs404.dtsi', it gives
921.6 MHz:
Since commit 92a81562e695 ("leds: lp55xx: Add multicolor framework
support to lp55xx") there are two subsequent tests if the chan_nr
(reg property) is in valid range. One in the lp55xx_init_led()
function and one in the lp55xx_parse_common_child() function that
was added with the mentioned commit.
There are two issues with that.
First is in the lp55xx_parse_common_child() function where the reg
property is tested right after it is read from the device tree.
Test for the upper range is not correct though. Valid reg values are
0 to (max_channel - 1) so it should be >=.
Second issue is that in case the parsed value is out of the range
the probe just fails and no error message is shown as the code never
reaches the second test that prints and error message.
Remove the test form lp55xx_parse_common_child() function completely
and keep the one in lp55xx_init_led() function to deal with it.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Link: https://lore.kernel.org/r/20241017150812.3563629-1-michal.vokac@ysoft.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM_LPAE_LVL_IDX() takes into account concatenated PGDs and can return
an index spanning multiple page-table pages given a sufficiently large
input address. However, when the resulting index is used to calculate
the number of remaining entries in the page, the possibility of
concatenation is ignored and we end up computing a negative upper bound:
On the map path, this results in a negative 'mapped' value being
returned but on the unmap path we can leak child tables if they are
skipped in __arm_lpae_free_pgtable().
Introduce an arm_lpae_max_entries() helper to convert a table index into
the remaining number of entries within a single page-table page.
Since 5.14-rc1, NUMA events will only be folded from per-CPU statistics to
per zone and global statistics when the user actually needs it.
Currently, the kernel has performs the fold operation when reading
/proc/vmstat, but does not perform the fold operation in /proc/zoneinfo.
This can lead to inaccuracies in the following statistics in zoneinfo:
- numa_hit
- numa_miss
- numa_foreign
- numa_interleave
- numa_local
- numa_other
Therefore, before printing per-zone vm_numa_event when reading
/proc/zoneinfo, we should also perform the fold operation.
Link: https://lkml.kernel.org/r/1730433998-10461-1-git-send-email-mengensun@tencent.com Fixes: f19298b9516c ("mm/vmstat: convert NUMA statistics to basic NUMA counters") Signed-off-by: MengEn Sun <mengensun@tencent.com> Reviewed-by: JinLiang Zheng <alexjlzheng@tencent.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current mod command causes a null pointer dereference. While commit 0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20241120052750.275463-1-guoweikang.kernel@gmail.com Fixes: 04ec7bb642b77 ("tracing: Have the trace_array hold the list of registered func probes"); Signed-off-by: guoweikang <guoweikang.kernel@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.
```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```
So, deny allocating an entity with ID 0 or an ID that belongs to a unit
that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
uvc_unregister_video() can be called asynchronously from
uvc_disconnect(). If the device is still streaming when that happens, a
plethora of race conditions can occur.
Make sure that the device has stopped streaming before exiting this
function.
If the user still holds handles to the driver's file descriptors, any
ioctl will return -ENODEV from the v4l2 core.
This change makes uvc more consistent with the rest of the v4l2 drivers
using the vb2_fop_* and vb2_ioctl_* helpers.
This driver (and many other usb drivers) always had this problem, but it
wasn't possible to easily fix this until the vb2_video_unregister_device()
helper was added. So the Fixes tag points to the creation of that helper.
In set_frame_rate(), select a rate in rate_0 or rate_1 by checking
sd->frame_rate >= r->fps in a loop, but the loop condition terminates when
the index reaches zero, which fails to check the last elememt in rate_0 or
rate_1.
Check for >= 0 so that the last one in rate_0 or rate_1 is also checked.
Fixes: 189d92af707e ("V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.") Cc: stable@vger.kernel.org Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cause of the problem is that when using sysfs to dynamically register
an i2c device, there is no platform data, but the probe process of ts2020
needs to use platform data, resulting in a null pointer being accessed.
Solve this problem by adding checks to platform data.
The power suppliers are always requested to suspend asynchronously,
dev_pm_domain_detach() requires the caller to ensure proper
synchronization of this function with power management callbacks.
otherwise the detach may led to kernel panic, like below:
If an error occurs in the probe() function, we should remove the polling
timer that was alarmed earlier, otherwise the timer is called with
arguments that are already freed, which results in a crash.
Fixes: 4e66a52a2e4c ("[media] tc358743: Add support for platforms without IRQ line") Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops.
Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Cc: <stable@vger.kernel.org> Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: TaoJiang <tao.jiang_2@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The way InvenSense MPU-6050 accelerometer is mounted on the user-facing side
of the Pine64 PinePhone mainboard, which makes it rotated 90 degrees counter-
clockwise, [1] requires the accelerometer's x- and y-axis to be swapped, and
the direction of the accelerometer's y-axis to be inverted.
Rectify this by adding a mount-matrix to the accelerometer definition in the
Pine64 PinePhone dtsi file.
This was attempted by using the dev_name in the slab cache name, but as
Omar Sandoval pointed out, that can be an arbitrary string, eg something
like "/dev/root". Which in turn trips verify_dirent_name(), which fails
if a filename contains a slash.
So just make it use a sequence counter, and make it an atomic_t to avoid
any possible races or locking issues.
When converting directory from in-ICB to normal format, the last
iteration through the directory fixing up directory enteries can fail
due to ENOMEM. We do not expect this iteration to fail since the
directory is already verified to be correct and it is difficult to undo
the conversion at this point. So just use GFP_NOFAIL to make sure the
small allocation cannot fail.
Reported-by: syzbot+111eaa994ff74f8d440f@syzkaller.appspotmail.com Fixes: 0aba4860b0d0 ("udf: Allocate name buffer in directory iterator on heap") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we allocate name buffer in directory iterators (struct
udf_fileident_iter) on stack. These structures are relatively large
(some 360 bytes on 64-bit architectures). For udf_rename() which needs
to keep three of these structures in parallel the stack usage becomes
rather heavy - 1536 bytes in total. Allocate the name buffer in the
iterator from heap to avoid excessive stack usage.
Link: https://lore.kernel.org/all/202212200558.lK9x1KW0-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
[Add extra include linux/slab.h] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuanzheng Song [Wed, 13 Nov 2024 16:31:19 +0000 (17:31 +0100)]
mm/memory: add non-anonymous page check in the copy_present_page()
The vma->anon_vma of the child process may be NULL because
the entire vma does not contain anonymous pages. In this
case, a BUG will occur when the copy_present_page() passes
a copy of a non-anonymous page of that vma to the
page_add_new_anon_rmap() to set up new anonymous rmap.
This problem has been fixed by the commit <fb3d824d1a46>
("mm/rmap: split page_dup_rmap() into page_dup_file_rmap()
and page_try_dup_anon_rmap()"), but still exists in the
linux-5.15.y branch.
This patch is not applicable to this version because
of the large version differences. Therefore, fix it by
adding non-anonymous page check in the copy_present_page().
Cc: stable@vger.kernel.org Fixes: 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses an issue introduced by commit 1a83a716ec233 ("mm:
krealloc: consider spare memory for __GFP_ZERO") which causes MTE
(Memory Tagging Extension) to falsely report a slab-out-of-bounds error.
The problem occurs when zeroing out spare memory in __do_krealloc. The
original code only considered software-based KASAN and did not account
for MTE. It does not reset the KASAN tag before calling memset, leading
to a mismatch between the pointer tag and the memory tag, resulting
in a false positive.
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock.
'need_recover' and 'mrdev' are equivalent in raid10_sync_request(), and
inc mrdev->nr_pending is unreasonable if don't need recovery. Replace
'need_recover' with 'mrdev', and only inc nr_pending when needed.
Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230527072218.2365857-3-linan666@huaweicloud.com Cc: Hagar Gamal Halim <hagarhem@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
ifcvf_init_hw() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
Convert the error check to plain non-zero check.
Fixes: 5a2414bc454e ("virtio: Intel IFC VF driver for VDPA") Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20241017013812.129952-1-yuancan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Zhu Lingshan <lingshan.zhu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In opal_event_init() if request_irq() fails name is not freed, leading
to a memory leak. The code only runs at boot time, there's no way for a
user to trigger it, so there's no security impact.
Currently the array size is only limited by the largest kmalloc size which
is incorrect. This change will also return a more specific error message
than ENOMEM to userspace.
When building for the UM arch and neither INDIRECT_IOMEM=y, nor
HAS_IOMEM=y is selected, it will fall back to the implementations from
asm-generic/io.h for IO memcpy. But these fall-back functions just do a
memcpy. So, instead of depending on UML, add dependency on 'HAS_IOMEM ||
INDIRECT_IOMEM'.
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kzmalloc call in bpf_check can fail when memory is very fragmented,
which in turn can lead to an OOM kill.
Use kvzmalloc to fall back to vmalloc when memory is too fragmented to
allocate an order 3 sized bpf verifier environment.
Admittedly this is not a very common case, and only happens on systems
where memory has already been squeezed close to the limit, but this does
not seem like much of a hot path, and it's a simple enough fix.
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit] Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Controllers, supported by this driver, have two sets of registers:
* (main) interrupt registers control peripheral interrupt sources.
* device interrupt registers configure per-device (network interface)
interrupts and act as an extra stage before the main interrupt
registers.
In the driver unmask code, device trigger registers are used in the mask
calculation of the main interrupt sticky register, mixing two kinds of
registers.
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL.
Cc: stable <stable@kernel.org> Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <2024102245-strive-crib-c8d3@gregkh> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://patch.msgid.link/3777d71b-9e19-45f4-be4e-17bf4fa7a834@stanley.mountain
[ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[nathan: Fix conflicts due to lack of e38abdab441c] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
The inc_rlimit_get_ucounts() increments the specified rlimit counter and
then checks its limit. If the value exceeds the limit, the function
returns an error without decrementing the counter.
Link: https://lkml.kernel.org/r/20241101191940.3211128-1-roman.gushchin@linux.dev Fixes: 15bc01effefe ("ucounts: Fix signal ucount refcounting") Signed-off-by: Andrei Vagin <avagin@google.com> Co-developed-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Alexey Gladkov <legion@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Andrei Vagin <avagin@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <legion@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reproducer uses faultinject facility to fail ocfs2_xa_remove() ->
ocfs2_xa_value_truncate() with -ENOMEM.
In this case the comment mentions that we can return 0 if
ocfs2_xa_cleanup_value_truncate() is going to wipe the entry
anyway. But the following 'rc' check is wrong and execution flow do
'ocfs2_xa_remove_entry(loc);' twice:
* 1st: in ocfs2_xa_cleanup_value_truncate();
* 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'.
Fix this by skipping the 2nd removal of the same entry and making
syzkaller repro happy.
Link: https://lkml.kernel.org/r/20241103193845.2940988-1-andrew.kanner@gmail.com Fixes: 399ff3a748cf ("ocfs2: Handle errors while setting external xattr values.") Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com> Reported-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/671e13ab.050a0220.2b8c0f.01d0.GAE@google.com/T/ Tested-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue.
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit().
Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can lead to out of bounds writes since frames of this type were not
taken into account when calculating the size of the frames buffer in
uvc_parse_streaming.
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Signed-off-by: Benoit Sevens <bsevens@google.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Fixes: f88649721268 ("ipv4: fix dst race in sk_dst_get()") Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ resolved conflict due to bc9d3a9f2afc ("net: dst: Switch to rcuref_t
reference counting") is not in the tree ] Signed-off-by: Abdelkareem Abdelsaamad <kareemem@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice.
CC: stable@vger.kernel.org Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Suggested-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Sherry: bp to fix CVE-2024-42291. Ignore context change in ice_fdir.h
to resolve conflicts. ] Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot triggered an uninit value[1] error in bridge device's xmit path
by sending a short (less than ETH_HLEN bytes) skb. To fix it check if
we can actually pull that amount instead of assuming.
Tested with dropwatch:
drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3)
origin: software
timestamp: Mon May 13 11:31:53 2024 778214037 nsec
protocol: 0x88a8
length: 2
original length: 2
drop reason: PKT_TOO_SMALL
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a63a1f6a062033cf0f40@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a63a1f6a062033cf0f40 Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee941692 ("btrfs: improve delayed refs iterations") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KMSAN warning is triggered in decode_getfattr_attrs(), when calling
decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not
initialized.
Fix the issue by initializing fattr->mdsthreshold to NULL in
nfs_fattr_init().
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-5-amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When cloning a new thread, its posix_cputimers are not inherited, and
are cleared by posix_cputimers_init(). However, this does not clear the
tick dependency it creates in tsk->tick_dep_mask, and the handler does
not reach the code to clear the dependency if there were no timers to
begin with.
Thus if a thread has a cputimer running before clone/fork, all
descendants will prevent nohz_full unless they create a cputimer of
their own.
Fix this by entirely clearing the tick_dep_mask in copy_process().
(There is currently no inherited state that needs a tick dependency)
Process-wide timers do not have this problem because fork does not copy
signal_struct as a baseline, it creates one from scratch.
Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model") Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
