Stephen Boyd [Tue, 9 Jul 2024 19:54:12 +0000 (12:54 -0700)]
Merge tag 'qcom-clk-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull more qcom clk driver updates from Bjorn Andersson:
- Introduces helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm
X1Elite.
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
* tag 'qcom-clk-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
clk: qcom: common: Add interconnect clocks support
interconnect: icc-clk: Add devm_icc_clk_register
interconnect: icc-clk: Specify master/slave ids
dt-bindings: clock: qcom: Add AHB clock for SM8150
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error
clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config
Stephen Boyd [Thu, 2 May 2024 22:47:02 +0000 (15:47 -0700)]
clk: qcom: Park shared RCGs upon registration
There's two problems with shared RCGs.
The first problem is that they incorrectly report the parent after
commit 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for
parked RCGs"). That's because the cached CFG register value needs to be
populated when the clk is registered. clk_rcg2_shared_enable() writes
the cached CFG register value 'parked_cfg'. This value is initially zero
due to static initializers. If a driver calls clk_enable() before
setting a rate or parent, it will set the parent to '0' which is
(almost?) always XO, and may not reflect the parent at registration. In
the worst case, this switches the RCG from sourcing a fast PLL to the
slow crystal speed.
The second problem is that the force enable bit isn't cleared. The force
enable bit is only used during parking and unparking of shared RCGs.
Otherwise it shouldn't be set because it keeps the RCG enabled even when
all the branches on the output of the RCG are disabled (the hardware has
a feedback mechanism so that any child branches keep the RCG enabled
when the branch enable bit is set). This problem wastes power if the clk
is unused, and is harmful in the case that the clk framework disables
the parent of the force enabled RCG. In the latter case, the GDSC the
shared RCG is associated with will get wedged if the RCG's source clk is
disabled and the GDSC tries to enable the RCG to do "housekeeping" while
powering on.
Both of these problems combined with incorrect runtime PM usage in the
display driver lead to a black screen on Qualcomm sc7180 Trogdor
chromebooks. What happens is that the bootloader leaves the
'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force
enabled and parented to 'disp_cc_pll0'. The mdss driver probes and
runtime suspends, disabling the mdss_gdsc which uses the
'disp_cc_mdss_rot_clk_src' for "housekeeping". The
'disp_cc_mdss_rot_clk' is disabled during late init because the clk is
unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled
because the force enable bit was never cleared. Then 'disp_cc_pll0' is
disabled because it is also unused. That's because the clk framework
believes the parent of the RCG is XO when it isn't. A child device of
the mdss device (e.g. DSI) runtime resumes mdss which powers on the
mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is
parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged,
mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it
can't because the GDSC has wedged all the clks associated with the GDSC
causing clks to stay stuck off.
This leads to the following warning seen at boot and a black screen
because the display driver fails to probe.
Fix these problems by parking shared RCGs at boot. This will properly
initialize the parked_cfg struct member so that the parent is reported
properly and ensure that the clk won't get stuck on or off because the
RCG is parented to the safe source (XO).
Fixes: 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs") Reported-by: Stephen Boyd <sboyd@kernel.org> Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org Closes: https://issuetracker.google.com/319956935 Reported-by: Laura Nao <laura.nao@collabora.com> Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com Cc: Bjorn Andersson <andersson@kernel.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Mon, 8 Jul 2024 17:57:49 +0000 (10:57 -0700)]
Merge tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Add clk drivers for Qualcomm SM7150 camera, display and video
- Add Qualcomm QCM2290 GPU clk driver
- Add Qualcomm QCS8386/QCS8084 NSS clk driver
- Add Qualcomm SM8650 camera and video drivers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match
HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- Add missing MODULE_DESCRIPTIONs to some qcom clk drivers
* tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (61 commits)
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
clk: qcom: gcc-ipq6018: update sdcc max clock frequency
clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver
dt-bindings: clock: qcom: Add SM8650 camera clock controller
dt-bindings: clock: qcom: Update the order of SC8280XP camcc header
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
dt-bindings: clock: qcom: Add SM8650 video clock controller
dt-bindings: clock: qcom: Update SM8450 videocc header file name
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
clk: qcom: gpucc-sa8775p: Park RCG's clk source at XO during disable
clk: qcom: gpucc-sa8775p: Remove the CLK_IS_CRITICAL and ALWAYS_ON flags
clk: qcom: gcc-sa8775p: Set FORCE_MEM_CORE_ON for gcc_ufs_phy_ice_core_clk
clk: qcom: gcc-sa8775p: Update the GDSC wait_val fields and flags
clk: qcom: gcc-sa8775p: Remove support for UFS hw ctl clocks
clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disable
clk: qcom: nsscc-qca8k: Fix the MDIO functions undefined issue
clk: qcom: select right config in CLK_QCM2290_GPUCC definition
clk: qcom: Remove QCOM_RPMCC symbol
clk: qcom: Add QCM2290 GPU clock controller driver
...
clk: qcom: common: Add interconnect clocks support
Unlike MSM platforms that manage NoC related clocks and scaling
from RPM, IPQ SoCs dont involve RPM in managing NoC related
clocks and there is no NoC scaling.
However, there is a requirement to enable some NoC interface
clocks for accessing the peripheral controllers present on
these NoCs. Though exposing these as normal clocks would work,
having a minimalistic interconnect driver to handle these clocks
would make it consistent with other Qualcomm platforms resulting
in common code paths. This is similar to msm8996-cbf's usage of
icc-clk framework.
Presently, icc-clk driver autogenerates the master and slave ids.
However, devices with multiple nodes on the interconnect could
have other constraints and may not match with the auto generated
node ids.
Hence, modify the driver to use the master/slave ids provided by
the caller instead of auto generating.
Abel Vesa [Thu, 30 May 2024 14:05:24 +0000 (17:05 +0300)]
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
Allow the USB3 second and third GCC PHY pipe clocks to propagate the
rate to the pipe clocks provided by the QMP combo PHYs. The first
instance is already doing that.
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip
interfaces. This will be used by the gcc-ipq9574 driver
that will for providing interconnect services using the
icc-clk framework.
Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240430064214.2030013-3-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
`lpass_audiocc_sc8280xp_regmap_config` and `lpasscc_sc8280x_regmap_config`
are not modified and can be declared as const to move their data to a
read-only section.
Abel Vesa [Fri, 28 Jun 2024 08:08:00 +0000 (11:08 +0300)]
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
In case of all pipe clocks, there is a QMP PHY clock that is feeding them.
If, for whatever reason, the clock from the PHY is not enabled, halt bit
will not get set, and the clock controller driver will assume the clock
is stuck in a specific state. The way this is supposed to be properly
fixed is to defer the checking of the halt bit until after the PHY clock
has been initialized, but doing so complicates the clock controller
driver. In fact, since these pipe clocks are consumed by the PHY, while
the PHY is also the one providing the source, if clock gets stuck, the PHY
driver would be to blame. So instead of checking the halt bit in here,
just skip it and assume the PHY driver is handling the source clock
correctly.
Bjorn Andersson [Tue, 25 Jun 2024 23:06:44 +0000 (18:06 -0500)]
Merge branch '20240602114439.1611-1-quic_jkona@quicinc.com' into clk-for-6.11
Merge SM8650 video and camera clock drivers through topic branch, to
make available the DeviceTree binding includes to the DeviceTree source
branches as well.
Jagadeesh Kona [Sun, 2 Jun 2024 11:44:35 +0000 (17:14 +0530)]
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
Add support to the SM8650 video clock controller by extending
the SM8550 video clock controller, which is mostly identical
but SM8650 has few additional clocks and minor differences.
Jagadeesh Kona [Sun, 2 Jun 2024 11:44:33 +0000 (17:14 +0530)]
dt-bindings: clock: qcom: Add SM8650 video clock controller
SM8650 video clock controller has most clocks same as SM8450,
but it also has few additional clocks and resets. Add device tree
bindings for the video clock controller on Qualcomm SM8650 platform
by defining these additional clocks and resets on top of SM8450.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-3-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Taniya Das [Wed, 12 Jun 2024 11:08:26 +0000 (16:38 +0530)]
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
Update wait_val fields as per the default hardware values of the GDSC as
otherwise it would lead to GDSC FSM state stuck causing power on/off
failures of the GSDC.
Taniya Das [Wed, 12 Jun 2024 11:08:25 +0000 (16:38 +0530)]
clk: qcom: gpucc-sa8775p: Park RCG's clk source at XO during disable
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Also gpu_cc_cb_clk is recommended to be kept always ON, hence use
clk_branch2_aon_ops to keep the clock always ON.
Taniya Das [Wed, 12 Jun 2024 11:08:24 +0000 (16:38 +0530)]
clk: qcom: gpucc-sa8775p: Remove the CLK_IS_CRITICAL and ALWAYS_ON flags
The GPU clocks/GDSCs have been marked critical from the clock driver
but the GPU driver votes on these resources as per the HW requirement.
In the case where these clocks & GDSCs are left enabled, would have
power impact and also cause GPU stability/corruptions.
Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON
flags for the GPU GDSCs.
Taniya Das [Wed, 12 Jun 2024 11:08:23 +0000 (16:38 +0530)]
clk: qcom: gcc-sa8775p: Set FORCE_MEM_CORE_ON for gcc_ufs_phy_ice_core_clk
Update the force mem core bit for UFS ICE clock to force the core on
signal to remain active during halt state of the clk. If force mem
core bit of the clock is not set, the memories of the subsystem will
not retain the logic across power states.
Taniya Das [Wed, 12 Jun 2024 11:08:22 +0000 (16:38 +0530)]
clk: qcom: gcc-sa8775p: Update the GDSC wait_val fields and flags
Update the GDSC wait_val fields as per the default hardware values as
otherwise they would lead to GDSC FSM state to be stuck and causing
failures to power on/off. Also add the GDSC flags as applicable and
add support to control PCIE GDSC's using collapse vote registers.
Taniya Das [Wed, 12 Jun 2024 11:08:21 +0000 (16:38 +0530)]
clk: qcom: gcc-sa8775p: Remove support for UFS hw ctl clocks
The UFS hw ctl clocks are not used by any consumers on SA8775P,
and these clocks are not using the correct clock ops to manage the
hw ctl of the branch clock, hence remove these clocks.
Lukas Bulwahn [Thu, 20 Jun 2024 20:14:31 +0000 (22:14 +0200)]
clk: qcom: select right config in CLK_QCM2290_GPUCC definition
Commit 8cab033628b1 ("clk: qcom: Add QCM2290 GPU clock controller driver")
adds the config CLK_QCM2290_GPUCC, which intends to select the support for
the QCM2290 Global Clock Controller. It however selects the non-existing
config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock
Controller is named QCM_GCC_2290.
Konrad Dybcio [Thu, 6 Jun 2024 11:36:01 +0000 (13:36 +0200)]
clk: qcom: clk-alpha-pll: Add HUAYRA_2290 support
Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL")
introduced an entry to the alpha offsets array, but diving into QCM2290
downstream and some documentation, it turned out that the name Huayra
apparently has been used quite liberally across many chips, even with
noticeably different hardware.
Introduce another set of offsets and a new configure function for the
Huayra PLL found on QCM2290. This is required e.g. for the consumers
of GPUCC_PLL0 to properly start.
Luo Jie [Wed, 5 Jun 2024 12:45:41 +0000 (20:45 +0800)]
clk: qcom: add clock controller driver for qca8386/qca8084
The clock controller driver of qca8386/qca8084 is registered
as the MDIO device, the hardware register is accessed by MDIO bus
that is normally used to access general PHY device, which is
different from the current existed qcom clock controller drivers
using ioremap to access hardware clock registers, nsscc-qca8k is
accessed via an MDIO bus.
MDIO bus is commonly utilized by both qca8386/qca8084 and other
PHY devices, so the mutex lock mdio_bus->mdio_lock should be
used instead of using the mutex lock of remap.
To access the hardware clock registers of qca8386/qca8084, there
is a special MDIO frame sequence, which needs to be sent to the
device.
Enable the reference clock before resetting the clock controller,
the reference clock rate is fixed to 50MHZ.
Luo Jie [Wed, 5 Jun 2024 12:45:40 +0000 (20:45 +0800)]
clk: qcom: common: commonize qcom_cc_really_probe
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luo Jie [Wed, 5 Jun 2024 12:45:39 +0000 (20:45 +0800)]
dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
QCA8386/QCA8084 includes the clock & reset controller that is
accessed by MDIO bus. Two work modes are supported, qca8386 works
as switch mode, qca8084 works as PHY mode.
Luo Jie [Wed, 5 Jun 2024 12:45:38 +0000 (20:45 +0800)]
clk: qcom: branch: Add clk_branch2_prepare_ops
Add the clk_branch2_prepare_ops for supporting clock controller
where the hardware register is accessed by MDIO bus, and the
spin lock can't be used because of sleep during the MDIO
operation.
The clock is enabled by the .prepare instead of .enable when
the clk_branch2_prepare_ops is used.
Dmitry Baryshkov [Wed, 29 May 2024 14:47:00 +0000 (17:47 +0300)]
dt-bindings: clock: qcom,gcc: sort out power-domains support
On some of Qualcomm platforms the Global Clock Controller (GCC) doesn't
provide power domains. Move requirement for the '#power-domain-cells'
out of the common qcom,gcc.yaml into individual schema files. For the
platforms that do not provide power-domains, explicitly forbid having
the '#power-domain-cells' property.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-2-69c63d0ae1e7@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Wed, 29 May 2024 14:46:59 +0000 (17:46 +0300)]
dt-bindings: clock: qcom,gcc-other: rename to qcom,mdm-mdm9607
The only platform remaining in qcom,gcc-other.yaml is MDM9607. Drop the
stale mentioning of gcc-msm8953.h include and rename the schema file
accordingly.
Taniya Das [Fri, 31 May 2024 09:51:42 +0000 (15:21 +0530)]
clk: qcom: camcc-sc7280: Add parent dependency to all camera GDSCs
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfebc2 ("clk: qcom: camcc: Add camera clock controller driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Taniya Das [Fri, 31 May 2024 09:51:41 +0000 (15:21 +0530)]
clk: qcom: gcc-sc7280: Update force mem core bit for UFS ICE clock
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Taniya Das [Fri, 31 May 2024 09:51:40 +0000 (15:21 +0530)]
clk: qcom: sc7280: Update the transition delay for GDSC
Add support to update the GDSC transition delay values to avoid
the GDSC FSM state stuck issues without which it could lead to GDSC
power on/off failures.
Kent Overstreet [Fri, 24 May 2024 15:42:09 +0000 (11:42 -0400)]
mm: percpu: Include smp.h in alloc_tag.h
percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.
This fixes a randconfig build error on mips:
include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Linus Torvalds [Sun, 26 May 2024 16:54:26 +0000 (09:54 -0700)]
Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tool fix from Arnaldo Carvalho de Melo:
"Revert a patch causing a regression.
This made a simple 'perf record -e cycles:pp make -j199' stop working
on the Ampere ARM64 system Linus uses to test ARM64 kernels".
* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sun, 26 May 2024 05:33:10 +0000 (22:33 -0700)]
Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- two important netfs integration fixes - including for a data
corruption and also fixes for multiple xfstests
- reenable swap support over SMB3
* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing set of remote_i_size
cifs: Fix smb3_insert_range() to move the zero_point
cifs: update internal version number
smb3: reenable swapfiles over SMB3 mounts
Linus Torvalds [Sat, 25 May 2024 22:10:33 +0000 (15:10 -0700)]
Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
Linus Torvalds [Sat, 25 May 2024 21:48:40 +0000 (14:48 -0700)]
Merge tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
Linus Torvalds [Sat, 25 May 2024 21:40:09 +0000 (14:40 -0700)]
Merge tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix regressions of the new x86 CPU VFM (vendor/family/model)
enumeration/matching code
- Fix crash kernel detection on buggy firmware with
non-compliant ACPI MADT tables
- Address Kconfig warning
* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
crypto: x86/aes-xts - switch to new Intel CPU model defines
x86/topology: Handle bogus ACPI tables correctly
x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
Linus Torvalds [Sat, 25 May 2024 21:23:58 +0000 (14:23 -0700)]
Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A series from Xiubo that adds support for additional access checks
based on MDS auth caps which were recently made available to clients.
This is needed to prevent scenarios where the MDS quietly discards
updates that a UID-restricted client previously (wrongfully) acked to
the user.
Other than that, just a documentation fixup"
* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
doc: ceph: update userspace command to get CephFS metadata
ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
ceph: check the cephx mds auth access for async dirop
ceph: check the cephx mds auth access for open
ceph: check the cephx mds auth access for setattr
ceph: add ceph_mds_check_access() helper
ceph: save cap_auths in MDS client when session is opened
Linus Torvalds [Sat, 25 May 2024 21:19:01 +0000 (14:19 -0700)]
Merge tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Fixes:
- reusing of the file index (could cause the file to be trimmed)
- infinite dir enumeration
- taking DOS names into account during link counting
- le32_to_cpu conversion, 32 bit overflow, NULL check
- some code was refactored
Changes:
- removed max link count info display during driver init
Remove:
- atomic_open has been removed for lack of use"
* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Break dir enumeration if directory contents error
fs/ntfs3: Fix case when index is reused during tree transformation
fs/ntfs3: Mark volume as dirty if xattr is broken
fs/ntfs3: Always make file nonresident on fallocate call
fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
fs/ntfs3: Use variable length array instead of fixed size
fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
fs/ntfs3: Check 'folio' pointer for NULL
fs/ntfs3: Missed le32_to_cpu conversion
fs/ntfs3: Remove max link count info display during driver init
fs/ntfs3: Taking DOS names into account during link counting
fs/ntfs3: remove atomic_open
fs/ntfs3: use kcalloc() instead of kzalloc()
Linus Torvalds [Sat, 25 May 2024 21:15:39 +0000 (14:15 -0700)]
Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both for stable"
* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: ignore trailing slashes in share paths
ksmbd: avoid to send duplicate oplock break notifications
Linus Torvalds [Sat, 25 May 2024 20:33:53 +0000 (13:33 -0700)]
Merge tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
Linus Torvalds [Sat, 25 May 2024 20:28:29 +0000 (13:28 -0700)]
Merge tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Runtime PM (power management) is improved and hot-join support has
been added to the dw controller driver.
Core:
- Allow device driver to trigger controller runtime PM
Drivers:
- dw: hot-join support
- svc: better IBI handling"
* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw: Add hot-join support.
i3c: master: Enable runtime PM for master controller
i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
Linus Torvalds [Sat, 25 May 2024 20:23:42 +0000 (13:23 -0700)]
Merge tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2 updates from Richard Weinberger:
- Fix illegal memory access in jffs2_free_inode()
- Kernel-doc fixes
- print symbolic error names
* tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: Fix potential illegal address access in jffs2_free_inode
jffs2: Simplify the allocation of slab caches
jffs2: nodemgmt: fix kernel-doc comments
jffs2: print symbolic error name instead of error code
Linus Torvalds [Sat, 25 May 2024 20:17:48 +0000 (13:17 -0700)]
Merge tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
um: virtio_uml: Convert to platform remove callback returning void
um: rtc: Convert to platform remove callback returning void
um: Remove unused do_get_thread_area function
um: Fix -Wmissing-prototypes warnings for __vdso_*
um: Add an internal header shared among the user code
um: Fix the declaration of kasan_map_memory
um: Fix the -Wmissing-prototypes warning for get_thread_reg
um: Fix the -Wmissing-prototypes warning for __switch_mm
um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
um: Stop tracking host PID in cpu_tasks
um: process: remove unused 'n' variable
um: vector: remove unused len variable/calculation
um: vector: fix bpfflash parameter evaluation
um: slirp: remove set but unused variable 'pid'
um: signal: move pid variable where needed
um: Makefile: use bash from the environment
um: Add winch to winch_handlers before registering winch IRQ
um: Fix -Wmissing-prototypes warnings for __warp_* and foo
um: Fix -Wmissing-prototypes warnings for text_poke*
um: Move declarations to proper headers
...
Linus Torvalds [Sat, 25 May 2024 00:28:02 +0000 (17:28 -0700)]
Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
David Howells [Fri, 24 May 2024 14:23:36 +0000 (15:23 +0100)]
cifs: Fix missing set of remote_i_size
Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.
This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.
Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.
This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.
[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]
Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev Signed-off-by: Steve French <stfrench@microsoft.com>
David Howells [Wed, 22 May 2024 08:38:48 +0000 (09:38 +0100)]
cifs: Fix smb3_insert_range() to move the zero_point
Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev Signed-off-by: Steve French <stfrench@microsoft.com>
Chengming Zhou [Mon, 13 May 2024 03:07:56 +0000 (11:07 +0800)]
mm/ksm: fix possible UAF of stable_node
The commit 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page
deduplication limit") introduced a possible failure case in the
stable_tree_insert(), where we may free the new allocated stable_node_dup
if we fail to prepare the missing chain node.
Then that kfolio return and unlock with a freed stable_node set... And
any MM activities can come in to access kfolio->mapping, so UAF.
Fix it by moving folio_set_stable_node() to the end after stable_node
is inserted successfully.
Link: https://lkml.kernel.org/r/20240513-b4-ksm-stable-node-uaf-v1-1-f687de76f452@linux.dev Fixes: 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit") Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Stefan Roesch <shr@devkernel.io> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memory_failure
try_memory_failure_hugetlb
me_huge_page
__page_handle_poison
dissolve_free_hugetlb_folio
drain_all_pages -- Buddy page can be isolated e.g. for compaction.
take_page_off_buddy -- Failed as page is not in the buddy list.
-- Page can be putback into buddy after compaction.
page_ref_inc -- Leads to buddy page with refcnt = 1.
Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning. And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.
Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.
Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com Fixes: ceaf8fbea79a ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yuanyuan Zhong [Thu, 23 May 2024 18:35:31 +0000 (12:35 -0600)]
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
After switching smaps_rollup to use VMA iterator, searching for next entry
is part of the condition expression of the do-while loop. So the current
VMA needs to be addressed before the continue statement.
Otherwise, with some VMAs skipped, userspace observed memory
consumption from /proc/pid/smaps_rollup will be smaller than the sum of
the corresponding fields from /proc/pid/smaps.
Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com Fixes: c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Mon, 20 May 2024 13:26:21 +0000 (22:26 +0900)]
nilfs2: fix potential hang in nilfs_detach_log_writer()
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
projects / thirdparty / linux.git / log
