domain_conf: move all virDomainDefValidateInternal() helpers to domain_validate.c
This patches moves the remaining static functions that
virDomainDefValidateInternal() uses to domain_validate.c. This
allows the next patch to move virDomainDefValidateInternal(),
and virDomainDefValidate(), without too much hassle.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move address validation functions to domain_validate.c
virDomainDefValidateAliases() is one of the static functions that
needs to be handled before moving virDomainDefValidateInternal().
Let's move all related validate functions to domain_validate.c
at the same time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will move virDomainDefValidateAliases() to domain_validate.c,
which uses virDomainDeviceInfoIterateInternal(), meaning that this
function will be made public. Rename it now to remove the 'Internal'
of its name.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move duplicate check functions to domain_validate.c
virDomainDefCheckDuplicateDiskInfo() and virDomainDefCheckDuplicateDriveAddresses()
are static functions used by virDomainDefValidateInternal(). Let's
move them to domain_validate.c to start clearing up the path to
move virDomainDefValidateInternal().
Change the functions name slightly to be more on par with their
new home.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Boris Fiuczynski [Thu, 10 Dec 2020 17:32:36 +0000 (18:32 +0100)]
node_device: pacify grumpy coverity due to addr override
With commit 09364608b4 node_device: refactor address retrieval of node device
"if-else if" was replaced by "switch".
The contained break statement now is no longer in context of the for loop
but instead of the switch causing the legitimate grumpiness of coverity.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Suggested-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 8 Dec 2020 19:44:30 +0000 (14:44 -0500)]
qemu: remove redundant check for file length when determining PCIe vs. PCI
Now that virPCIDeviceIsPCIExpress() checks the length of the file when
the process lacks sufficient privilege to read the entire PCI config
file in sysfs, we can remove the open-coding for that case from its
consumer.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 8 Dec 2020 19:34:19 +0000 (14:34 -0500)]
util: make virPCIDeviceIsPCIExpress() more intelligent
Until now there has been an extra bit of code in
qemuDomainDeviceCalculatePCIConnectFlag() (one of the two callers of
virPCIDeviceIsPCIExpress()) that tries to determine if a device is
PCIe by looking at the *length* of its sysfs config file; it only does
this when libvirt is running as a non-root process.
This patch takes advantage of our newfound ability to tell the
difference between "I read a 0 from the device PCI config file" and "I
couldn't read the PCI Express Capabilities because I don't have
sufficient permission" to put the file length check down in
virPCIDeviceIsPCIExpress(), and do that check any time we fail while
reading the config file (not only when the process is non-root).
Fixes: https://bugzilla.redhat.com/1901685 Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 7 Dec 2020 20:46:54 +0000 (15:46 -0500)]
util: change call sequence for virPCIDeviceFindCapabilityOffset()
Previously there was no way to differentiate between this function 1)
encountering an error while reading the pci config, and 2) determining
that the device in question is a conventional PCI device, and so has
no Express Capabilities.
The difference between these two conditions is important, because an
unprivileged libvirtd will be unable to read all of the pci config (it
can only read the first 64 bytes, and will get ENOENT when it tries to
seek past that limit) even though the device is in fact a PCIe device.
This patch changes virPCIDeviceFindCapabilityOffset() to put the
determined offset into an argument of the function (rather than
sending it back as the return value), and to return the standard "0 on
success, -1 on failure". Failure is determined by checking the value
of errno after each attemptd read of the config file (which can only
work reliably if errno is reset to 0 before each read, and after
virPCIDeviceFindCapabilityOffset() has finished examining it).
(NB: if the config file is read successfully, but no Express
Capabilities are found, then the function returns success, but the
returned offset will be 0 (which is an impossible offset for Express
Capabilities, and so easily recognizeable).
An upcoming patch will take advantage of the change made here.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 7 Dec 2020 01:26:01 +0000 (20:26 -0500)]
util: make read error of PCI config file more detailed
The new message is more verbose/useful, but only logged at debug level
instead of as a warning (since it could easily happen in a non-error
situation).
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Sun, 6 Dec 2020 21:20:23 +0000 (16:20 -0500)]
util: simplify call to virPCIDeviceDetectPowerManagementReset()
This function returned an int, but would only return 0 or 1, and the
one place it was called would just use !! to convert that value to a
bool. Change the function to directly return bool instead.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Sun, 6 Dec 2020 21:05:03 +0000 (16:05 -0500)]
util: simplify calling of virPCIDeviceDetectFunctionLevelReset()
This function returned an int, and that int was being checked for < 0
in its solitary caller, but within the function it would only ever
return 0 or 1. Change the function itself to return a bool, and the
caller to just directly set the flag in the virPCIDevice.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Tue, 24 Nov 2020 21:56:52 +0000 (16:56 -0500)]
qemu: use g_autoptr for a virPCIDevice
The one instance of a virPCIDevice in
qemuDomainDeviceCalculatePCIConnectFlags() needs to be converted to
use g_autoptr as a prerequisite for a bugfix. It's in this patch by
itself (rather than in a patch converting all virPCIDevice usages to
g_autoptr) to simplify any backport of said bugfix.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nwfilter can be edited by the user and we don't want to overwrite the editings.
Also the filters in %{datadir} does not have UUIDs and these are generated on
libvirtd start. Thus this patch also fixes regeneration of UUIDs on libvirtd
update.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Tue, 8 Dec 2020 15:28:40 +0000 (16:28 +0100)]
qemuDomainCheckpointLoad: Remove stale comment
We decided to not do metadata-less checkpoints and checking whether the
metadata is consistent is done once the data is actually needed. Remove
the comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 8 Dec 2020 15:16:08 +0000 (16:16 +0100)]
qemuDomainCheckpointLoad: Don't align disks when restoring config from disk
The alignment step is not really necessary once we've done it already
since we fully populate the definition. In case of checkpoints it was a
relic necessary for populating the 'idx' to match checkpoint disk to
definition disk, but that was already removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
domain_conf.c: move idmapEntry checks to domain_validate.c
Create a new function called virDomainDefIdMapValidate() and
use it to move these checks out of virDomainIdmapDefParseXML()
and virDomainDefParseXML().
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move virDomainPCIControllerOpts checks to domain_validate.c
virDomainControllerDefParseXML() does a lot of checks with
virDomainPCIControllerOpts parameters that can be moved to
virDomainControllerDefValidate, sharing the logic with other use
cases that does not rely on XML parsing.
'pseries-default-phb-numa-node' parse error was changed to reflect
the error that is being thrown by qemuValidateDomainDeviceDefController()
via deviceValidateCallback, that is executed before
virDomainControllerDefValidate().
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move all ChrSource checks to domain_validate.c
Next patch will move a validation to virDomainSmartcardDefValidate(),
but this function can't be moved alone to domain_validate.c without
making virDomainChrSourceDefValidate(), from domain_conf.c, public.
Given that the idea is to eventually move all validations to domain_validate.c
anyways, let's move all ChrSource related validations in a single punch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move vendor, product and tray checks to domain_validate.c
The 'tray' check isn't a XML parse specific code and can be pushed
to the validate callback, in virDomainDiskDefValidate().
'vendor' and 'product' string sizes are already checked by the
domaincommon.rng schema, but can be of use in the validate callback
since not all scenarios will go through the XML parsing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move virDomainDiskDefValidate() to domain_validate.c
Next patch will add more validations to the function. Let's move
it beforehand to domain_validate.c.
virSecurityDeviceLabelDefValidateXML() is still used inside
domain_conf.c, so make it public for now until its current
caller (virDomainChrSourceDefValidate()) is also moved to
domain_validate.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf.c: move QXL attributes check to virDomainVideoDefValidate()
These checks are not related to XML parsing and can be moved to the
validate callback. Errors were changed from VIR_ERR_XML_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
domain_conf: move boot timeouts check to domain_validate.c
This patch creates a new function, virDomainDefBootValidate(), to host
the validation of boot menu timeout and rebootTimeout outside of parse
time. The checks in virDomainDefParseBootXML() were changed to throw
VIR_ERR_XML_ERROR in case of parse error of those values.
In an attempt to alleviate the amount of code being stacked inside
domain_conf.c, let's put this new function in a new domain_validate.c
file that will be used to place these validations.
Suggested-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Peter Krempa [Wed, 9 Dec 2020 09:08:53 +0000 (10:08 +0100)]
qemu: Fix logic bug in inactive snapshot deletion
Commit 926563dc3a6 which refactored the function call deleting the
snapshot's on disk state introduced a logic bug, which skips over the
deletion of libvirt metadata after the disk state deletion is done.
To fix it we must not return early.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/109 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Peter Krempa [Tue, 8 Dec 2020 13:27:59 +0000 (14:27 +0100)]
qemu: validate: Prefer existing qemuCaps
The validation callback always fetched a fresh copy of 'qemuCaps' to use
for validation which is wrong in cases when the VM is already running,
such as device hotplug. The newly-fetched qemuCaps may contain flags
which weren't originally in use when starting the VM e.g. on a libvirtd
upgrade.
Since the post-parse/validation machinery has a per-run 'parseOpaque'
field filled with qemuCaps of the actual process we can reuse the caps
in cases when we get them.
The code still fetches a fresh copy if parseOpaque doesn't have a
per-run copy to preserve existing functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 8 Dec 2020 13:11:13 +0000 (14:11 +0100)]
virDomainDefValidate: Add per-run 'opaque' data
virDomainDefPostParse infrastructure has apart from the global opaque
data also per-run data, but this was not duplicated into the validation
callbacks.
This is important when drivers want to use correct run-state for the
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 7 Dec 2020 16:53:21 +0000 (17:53 +0100)]
qemuBlockJobInfoTranslate: Take job type from qemuBlockJobDataPtr
Commit f5e8715a8b4 added logic which adds some fake job info when qemu
didn't return anything but in such case the job type would not be set.
Since we already have the proper job type recorded in qemuBlockJobDataPtr
which the caller fetched, we can use this it and also remove the lookup
from the disk which was necessary prior to the conversion to
qemuBlockJobDataPtr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 7 Dec 2020 11:38:43 +0000 (12:38 +0100)]
qemuDomainGetStorageSourceByDevstr: Lookup also backup 'store' nodenames
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 7 Dec 2020 11:38:43 +0000 (12:38 +0100)]
qemuDomainDiskLookupByNodename: Lookup also backup 'store' nodenames
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virStorageFileChainLookup' reports an error when the lookup of the
backing chain entry is unsuccessful. Since we possibly use it multiple
times when looking up backing for 'disk->mirror' the function can report
error which won't be actually reported.
Replace the call to virStorageFileChainLookup by lookup in the chain by
index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 7 Dec 2020 11:24:31 +0000 (12:24 +0100)]
qemuDomainDiskLookupByNodename: Simplify node name lookup
Use dummy variable to fill 'src' so that access to it doesn't need to be
conditionalized and use temporary variable for 'disk' rather than
dereferencing the array multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
virsh: cmdSetUserSSHKeys: Error early if the file doesn't contain any keys
When removing SSH keys via set-user-sshkeys virsh command, then
files to remove are read from passed file. But when
experimenting, I've passed /dev/null as the file which resulted
in API checks which caught that @keys argument of
virDomainAuthorizedSSHKeysSet() can't be NULL. This is because if
the file is empty then its content is an empty string and thus
the buffer the file was read in to is not NULL.
Long story short, error is reported correctly, but it's not
necessary to go through public API to catch it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.10.0-rc1~104 I've added a virsh command that exposes
virDomainAuthorizedSSHKeysSet() API under "set-user-sshkeys"
command. The command accepts mutually exclusive "--reset" and
"--remove" options (among others). While the former controls the
VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_APPEND flag, the latter
controls the VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_REMOVE flag.
These flags are also mutually exclusive. But the code that sets
them has a logical error which may result in both flags being
set. In fact, this results in user being not able to set just the
remove flag.
Fixes: 87d12effbea8b414c250b6fefd93154c62a99370
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1904674 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Olaf Hering [Fri, 20 Nov 2020 12:29:14 +0000 (13:29 +0100)]
xen: recognize device_model_override
Since Xen 4.2 libxl expects device_model_override="/path" instead of
device_model="/path". Adjust the code to parse this as <emulator>.
While libxl also recognizes device_model_version="", this knob is not
required for libvirt. A runtime detection exists in libvirt to select
either "qemu-xen" or "qemu-xen-traditional".
Since qemu-xen-traditional is marked as supported just for stubdoms
there is no need to handle it.
Test data files with 'device_model' were adjusted to use
'device_model_override' instead.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Jim Fehlig [Thu, 3 Dec 2020 18:55:24 +0000 (11:55 -0700)]
lxc: Set default security model in XML parser config
Attempting to create a lxc domain with <seclabel type='none'/> fails
virsh --connect lxc:/// create distro_nosec.xml
error: Failed to create domain from distro_nosec.xml
error: unsupported configuration: Security driver model '(null)' is not available
Commit 638ffa2228 adjusted the logic for setting a driver's default
security model.
The lxc driver does not set a default security driver model in the XML
parser config, causing seclabels of type='none' to have a null model.
The lxc driver's security manager is initialized in lxcStateInitialize()
by calling lxcSecurityInit(). Use the model of this manager as the
default in the XML parser config.
For the record, this is a regression caused by commit 638ffa2228, which
changed the logic for setting a driver's default security model. The
qemu driver was adjusted accordingly, but a similar change was missed
in the lxc driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Kevin Locke [Sun, 6 Dec 2020 16:00:07 +0000 (09:00 -0700)]
libvirt-guests: Remove obsolete Windows comment
The comment that
> For instance, qemu-ga doesn't support guest time synchronization on
> Windows guests, but Linux ones.
Was correct at the time, but has since been addressed by
qemu/qemu@105fad6bb22, which added support for set-time without a time
argument, as used by `virsh domtime --sync` by libvirt-guests.sh. I can
confirm that `virsh domtime --sync` works correctly on a Windows 10
guest, as does `SYNC_TIME=1`. (Note that there can be a significant
delay between when the command completes and when the guest time
finishes synchronizing due to QEMU GA calling `w32tm` with `/nowait`,
which complicates testing.)
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
In v6.0.0-rc1~439 (and friends) we tried to cache NUMA
capabilities because we assumed they are immutable. And to some
extent they are (NUMA hotplug is not a thing, is it). However,
our capabilities contain also some runtime info that can change,
e.g. hugepages pool allocation sizes or total amount of memory
per node (host side memory hotplug might change the value).
Because of the caching we might not be reporting the correct
runtime info in 'virsh capabilities'.
The NUMA caps are used in three places:
1) 'virsh capabilities'
2) domain startup, when parsing numad reply
3) parsing domain private data XML
In cases 2) and 3) we need NUMA caps to construct list of
physical CPUs that belong to NUMA nodes from numad reply. And
while this may seem static, it's not really because of possible
CPU hotplug on physical host.
There are two possible approaches:
1) build a validation mechanism that would invalidate the
cached NUMA caps, or
2) drop the caching and construct NUMA caps from scratch on
each use.
In this commit, the latter approach is implemented, because it's
easier.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819058 Fixes: 1a1d848694f6c2f1d98a371124928375bc3bb4a3 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Peter Krempa [Fri, 4 Dec 2020 15:08:02 +0000 (16:08 +0100)]
qemuDomainGetBlockJobInfo: Work stats for unfinished pre-blockdev blockjob
If the job has finished, but we didn't yet process the completion fake
that it's still incomplete so that apps which decided to poll
qemuDomainGetBlockJobInfo rather than use events can be sure that the
XML update was completed.
Peter Krempa [Fri, 4 Dec 2020 15:08:00 +0000 (16:08 +0100)]
qemuDomainGetBlockJobInfo: Use qemuMonitorGetAllBlockJobInfo
Replace qemuMonitorGetBlockJobInfo by qemuMonitorGetAllBlockJobInfo and
hash table lookup. This basically open-codes qemuMonitorGetBlockJobInfo,
but it will be removed in next patch.
Michal Privoznik [Wed, 11 Nov 2020 12:51:21 +0000 (13:51 +0100)]
lxc: Cleanup after failed startup
If starting an container fails, the virLXCProcessStop() is
called. But since vm->def->id is not set until libvirt_lxc is
spawned (the domain's ID is PID of that process),
virLXCProcessStop() returns early as virDomainObjIsActive()
returns false. But doing so leaves behind resources reserved for
the containers during the startup process. Most notably, hostdevs
are not re-attached to the host, the domain's transient XML is
not removed, etc.
To resolve this, virLXCProcessCleanup() is called in this case.
However, it is modified to accept @flags which allows caller to
run only specific cleanups (depending how far in container
creation the failure occurred). There is plenty of cleanups which
don't need this guard because either they detect a NULL pointer
or try to release an unique resource.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemu_monitor_json: Don't leak "option" in qemuMonitorJSONGetCommandLineOptions()
In recent commit of bf8bd93df0 (and friends) we switched the way
we process queried command line arguments: from string lists to
virJSONValue stored in a hash table. To achieve this
qemuMonitorJSONGetCommandLineOptions() helper was introduced
which executes the "query-command-line-options" monitor command
and then calls virJSONValueArrayForeachSteal() to process the
output. The array process function is also given
qemuMonitorJSONGetCommandLineOptionsWorker() as the callback
which is called over each item of the returned array. This
callback then steals "parameters" attribute of each array iteam
storing it in the hash table, but it leaves behind "option"
attribute (because it's g_strdup()-ed). After all of this, the
callback returns 0 which is a signal to the array processing
function that the callback took ownership of the array item. But
this is not true. While it removed "parameters" it did not take
the rest ("option" for instance). And therefore, it leads to a
memory leak:
5,347 (1,656 direct, 3,691 indirect) bytes in 69 blocks are definitely lost in loss record 2,752 of 2,794
at 0x483BEC5: calloc (vg_replace_malloc.c:760)
by 0x4E25A10: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.5)
by 0x4943317: virJSONValueNewObject (virjson.c:569)
by 0x4945692: virJSONParserHandleStartMap (virjson.c:1768)
by 0x5825A86: yajl_do_parse (in /usr/lib64/libyajl.so.2.1.0)
by 0x4945BFA: virJSONValueFromString (virjson.c:1896)
by 0xAF5C115: qemuMonitorJSONIOProcessLine (qemu_monitor_json.c:224)
by 0xAF5C45E: qemuMonitorJSONIOProcess (qemu_monitor_json.c:279)
by 0xAF4BB6C: qemuMonitorIOProcess (qemu_monitor.c:342)
by 0xAF4C444: qemuMonitorIO (qemu_monitor.c:574)
by 0x4FEF846: socket_source_dispatch (in /usr/lib64/libgio-2.0.so.0.6400.5)
by 0x4E1F727: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.6400.5)
The callback must return 1 so that the array item is properly
freed.
Fixes: ebeff6cd57d07c89d42e191ed0085a9dd89835c5 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu_domain.c: align all pSeries mem modules when PARSE_ABI_UPDATE
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.
This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.
Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.
A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:
- starting QEMU mem size without PARSE_ABI_UPDATE:
-m size=1310720k,slots=16,maxmem=4194304k \ (no changes)
- starting QEMU mem size with PARSE_ABI_UPDATE:
-m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemu_domain.c: post parse pSeries NVDIMM align with PARSE_ABI_UPDATE
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a624.
Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.
Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.
A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Revert "domain_conf.c: auto-align pSeries NVDIMM in virDomainMemoryDefPostParse()"
The code to align ppc64 NVDIMMs on post parse was introduced in
commit d3f3c2c97f9b. That commit failed to realize that we
can't align memory unconditionally. As of commit c7d7ba85a624
("qemu: command: Align memory sizes only on fresh starts"),
all memory alignment should be executed only when we're not
migrating or in a snapshot.
This revert does not break any guests in the wild, given that
ppc64 NVDIMMs are still being aligned in qemuDomainAlignMemorySizes().
Next patch will introduce a mechanism where we can have post
parse NVDIMM alignment for pSeries without breaking the
intended design, as defined by c7d7ba85a624.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
projects / thirdparty / libvirt.git / log
