Taimur Hassan [Fri, 20 Mar 2026 22:38:34 +0000 (17:38 -0500)]
drm/amd/display: Promote DC to 3.2.376
This version brings along following fixes:
- correct unknown plane state patch
- Revert "Refactor DC update checks"
- Revert "Add 3DLUT DMA broadcast support"
- Remove invalid DPSTREAMCLK mask usage
- enable eDP DSC seamless boot support
- Revert "Rework HDMI link training and YCbCr422 with DSC policy"
- Disable PSR & Replay CRTC disable by default
- Fix Silence Compiler Warnings
- Add link output control for DPIA
- eliminate clock manager code duplication
- Don't set 4to1MPC config dynamically
- Merge pipes for validate
- Fix bounds checking in dml2_0 clock table array
- Avoid turning off the PHY when OTG is running for DVI
- Should support p-state under dcn21
- Enable Replay support for dcn42
- Remove check for DC_DMCUB_ENABLE on DCN42
Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Silence type conversion warnings in dml2
[Why]
Compiler build generates type conversion warnings throughout dc/dml2_0
where values are implicitly narrowed (e.g. int/uint32_t/uint64_t assigned
to uint8_t, unsigned char, char, bool, or dml_bool_t), cluttering build
output and masking genuine issues.
[How]
Add explicit casts at each narrowing assignment with ASSERT guards
to catch out-of-range values in debug builds:
- uint8_t: otg_inst, num_planes, pipe_idx, vblank_index fields
- unsigned char: pipe_dlg_param.otg_inst from tg->inst
- char: mcache num_pipes from num_dpps_required
- bool/dml_bool_t: INTERLACE bitfield and fams2 enable flag use != 0
- uint64_t: widen min_hardware_refresh_in_uhz to hold div64_u64 result,
then cast to unsigned long for min_refresh_uhz with ASSERT
Rafal Ostrowski [Mon, 23 Feb 2026 05:13:32 +0000 (06:13 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 3
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafal Ostrowski [Wed, 18 Feb 2026 15:19:47 +0000 (16:19 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 2
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Removed DC_FP_START and DC_FP_END.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafal Ostrowski [Tue, 24 Feb 2026 14:36:09 +0000 (15:36 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 1
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gangliang Xie [Wed, 18 Mar 2026 08:09:39 +0000 (16:09 +0800)]
drm/amdgpu: add support to query vram info from firmware
add support to query vram info from firmware
v2: change APU vram type, add multi-aid check
v3: seperate vram info query function into 3 parts and
call them in a helper func when requirements
are met.
v4: calculate vram_width for v9.x
DCN4.x hardware does not have DPSTREAMCLK_GATE_DISABLE and
DPSTREAMCLK_ROOT_GATE_DISABLE fields in DCCG_GATE_DISABLE_CNTL3.
These global fields only exist in DCN3.1.x hardware.
[How]
Remove the call that tries to update non-existent fields in CNTL3.
DCN4.x uses per-instance fields in CNTL5 instead,
which are already correctly programmed in the switch cases above.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohit Bawa [Wed, 5 Nov 2025 18:58:35 +0000 (13:58 -0500)]
drm/amd/display: enable eDP DSC seamless boot support
[Why]
VBIOS supports DSC for seamless boot on newer hardware.
Reading hardware state allows proper DSC validation without breaking
existing boot display.
[What]
Remove DSC block for boot timing validation and implement hardware state
reading to populate DSC configuration from VBIOS-configured state.
Enhance dsc_read_state function in DCN401 to read additional
DSC parameters.
Lincheng Ku [Tue, 17 Mar 2026 19:58:35 +0000 (03:58 +0800)]
drm/amd/dc: Add link output control for DPIA
[Why]
To support specific sequencing requirements for DPIA link output
[How]
Implement the dpia_link_hwss structure and define the necessary
control function pointers. The initialization order is
aligned with the core link_hwss definition to ensure consistency
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Lincheng Ku <LinCheng.Ku@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Silence signed/unsighed mismatch warning in dc
[Why]
Implicit signed-to-unsigned conversions caused compiler
warnings in DC paths.
[How]
Added explicit (unsigned int)/(uint32_t) casts for sentinel -1
assignments and IRQ ~MASK initializers, with small cast alignment
in logging/DPCD code.
Functionality and behavior is unchanged; only type intent is explicit.
[Why]
Clock manager contained significant duplicate code between
variants with identical logic for functions using only SMU
calls or shared registers. This increases maintenance overhead
and potential for bugs.
[How]
Expose clock constants and internal functions in header for
sharing. Remove duplicate implementations and update function
pointers to use shared functions. Refactor remaining
variant-specific functions to use shared constants and helper
functions. Add compatibility comments for hardware differences.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Silence Conversion Warnings in Dmub
Fix Conversion that might result in a loss of data warnings in dmub/src/:
- dmub_dcn20/31/32/35/42/60/401.c: Add ASSERT(value <= 0xFF) and
explicit (uint8_t) cast when storing REG_GET results into uint8_t
debug struct fields. Add != 0 for bool assignments from uint32_t
bitfield reads.
- dmub_reg.c: Cast va_arg shift value to uint8_t with ASSERT guard
before passing to set_reg_field_value_masks().
- dmub_srv.c: Widen num_pending to uint64_t to match uint64_t
arithmetic; use != 0 for bool assignments from unsigned expressions.
Harry Wentland [Fri, 16 Jan 2026 16:47:50 +0000 (11:47 -0500)]
drm/amd/display: Don't set 4to1MPC config dynamically
We were previously modifying the global dc->config.enable_4to1MPC
dynamically. These variables are meant as global configs, not to
by dynamically modified. Modifying them dynamically prevents us
from enabling/disabling functionality for debug purposes and can
easily lead to bad things since we're not operating on the current
state but on DC-wide variables.
Instead we should look at the existing split4mpc decision in
dcn20_validate_apply_split_flags and make the decision there,
if the global config.enable_4to1MPC is set to true for the
DCN version we're running.
This fixes corruption that is observed when running a new IGT
kms_colorop test for color-space-conversion that uses a
YUV plane and outputs to a writeback connector.
Co-developed by Claude Sonnet 4.5.
Assisted-by: Claude:claude-sonnet-4.5 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
Fixes: ca0fb243c3bb ("drm/amd/display: Underflow Seen on DCN401 eGPU") Cc: Daniel Sa <Daniel.Sa@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 16 Jan 2026 16:48:11 +0000 (11:48 -0500)]
drm/amd/display: Merge pipes for validate
Validation expects to operate on non-split pipes. This is
seen in dcn20_fast_validate_bw, which merges pipes for
validation. We weren't doing that in the non-fast path
which lead to validation failures when operating with
4-to-1 MPC and a writeback connector.
Co-developed by Claude Sonnet 4.5
Assisted-by: Claude:claude-sonnet-4.5 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add NULL check for integrated_info in clk_mgr_construct
clk_mgr_construct() initializes display clock and memory bandwidth
settings during driver bring-up.
As part of this, the driver selects a watermark table based on the
memory type (DDR4, LPDDR4, LPDDR5) from ctx->dc_bios->integrated_info.
The display pipeline continuously reads pixel data from memory,
processes it (such as scaling, color conversion, and blending), and
sends it to the screen. To keep this pipeline running smoothly, the
driver must ensure there is enough memory bandwidth and that clocks are
increased when needed.
Watermark tables define when the GPU should increase clocks to ensure
there is enough bandwidth to feed pixel data without underflow.
However, ctx->dc_bios->integrated_info is dereferenced without checking
for NULL in multiple clk_mgr_construct() implementations. On some
platforms, BIOS may not provide this information, and accessing it
directly can cause a NULL pointer dereference during initialization.
Fix this by adding a NULL check before accessing integrated_info.
If integrated_info is not available, the driver safely falls back to
default watermark tables.
Fixes:
../dcn21/rn_clk_mgr.c:775 rn_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 743)
../dcn301/vg_clk_mgr.c:750 vg_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 736)
../dcn31/dcn31_clk_mgr.c:789 dcn31_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 728)
../dcn314/dcn314_clk_mgr.c:906 dcn314_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 845)
../dcn315/dcn315_clk_mgr.c:716 dcn315_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 655)
../dcn316/dcn316_clk_mgr.c:660 dcn316_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 639)
../dcn35/dcn35_clk_mgr.c:1540 dcn35_clk_mgr_construct() warn: variable dereferenced before check 'ctx->dc_bios->integrated_info' (see line 1467)
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)
Fixes: 2631ac1ac328 ("drm/amd/display: add DMUB registers to crash dump diagnostic data.") Fixes: 71ba6b577a35 ("drm/amd/display: Add interface to enable DPIA trace") Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gabe Teeger [Mon, 16 Mar 2026 14:41:27 +0000 (10:41 -0400)]
drm/amd/display: Fix bounds checking in dml2_0 clock table array
[Why]
Multiple locations in dml2_0 used num_clk_values-1 as array index
without checking if num_clk_values > 0. When num_clk_values is 0,
this results in accessing array index -1, which wraps to 255 for
unsigned types, causing out-of-bounds memory access and potential
crashes.
[How]
Add proper bounds checking using ternary operators to guard all
num_clk_values-1 array accesses. When num_clk_values is 0, return 0
as fallback value instead of accessing invalid memory. This prevents
buffer overflows while maintaining backward compatibility and provides
sensible default behavior for empty clock tables.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Avoid turning off the PHY when OTG is running for DVI
[Why]
The OTG's virtual pixel clock source for DVI comes from the PHY.
If the signal type is DVI then the OTG can become stuck on pre DCN401
ASIC when DPMS off occurs because the OTG remains running but the
PHY transmitter is disabled.
[How]
There exists logic to keep track of the OTG running refcount on the
link to determine if the link needs to go to PLL_EN instead of TX_EN
but the logic only checks for HDMI TMDS on older ASIC.
DVI is still a TMDS signal type so the constraint should also apply.
Replace the checks for dc_is_hdmi_tmds_signal with dc_is_tmds_signal to
cover both HDMI and DVI for the symclk refcount workaround.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Thu, 5 Feb 2026 07:36:18 +0000 (15:36 +0800)]
drm/amd/display: Should support p-state under dcn21
[Why]
Under DCN21, observe flip_done timeout issue while
running 3D benchmark under MPO case. Timeout is caused
by driver fails validate_bandwidth() during
atomic_commit_tail but passes atomic_check.
Under further analysis, indicates the delta of
atomic_check and atomic_commit_tail are
dc->current_state->bw_ctx.dml.soc.sr_exit_time_us and
dc->current_state->bw_ctx.dml.soc.sr_enter_plus_exit_time_us.
We set validate_mode as DC_VALIDATE_MODE_ONLY while calling
dc_validate_global_state() at atomic_check, but set mode as
DC_VALIDATE_MODE_AND_PROGRAMMING during atomic_commit_tail.
If dc_validate_mode set as DC_VALIDATE_MODE_ONLY,
validate_bandwidth() will skip the wm and dlg calculation.
During commit_tail, validate_bandwidth() is called with
dc_validate_mode set as DC_VALIDATE_MODE_AND_PROGRAMMING and
dc_state->bw_ctx.dml.soc.sr_exit_time_us might get modified
after the wm_calculation and stored into dc->current_state.
Which means dc->current_state->bw_ctx.dml.soc.sr_exit_time_us
might not aligned with the one stored in dm_state->context.
That causes duplicated dm_state->context not aligned with
dc->current_state, and might have bandwidth validation pass
in atomic_check and fail in commit_tail later.
[How]
When the issue occurs, it fails dml_get_voltage_level() with
the condition dm_allow_self_refresh_and_mclk_switch but pass
with the condition dm_allow_self_refresh. However, we should
support p-state. So we should not pass validate_bandwidth by
allowing self refresh only. Change the policy under DCN21.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 20 Mar 2026 21:02:33 +0000 (17:02 -0400)]
drm/amd/display: Enable Replay support for dcn42
Add DCN4.2 to the list that supports
Panel Replay feature.
Reviewed-by: Alex Hung <Alex.Hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gabe Teeger [Wed, 31 Dec 2025 20:19:22 +0000 (15:19 -0500)]
drm/amd/display: Remove check for DC_DMCUB_ENABLE on DCN42
[why]
DCN without DMCUB is not a supported configuration on DCN42.
[how]
Remove the DC_DMCUB_ENABLE fuse register check and remove the
corresponding entries in the DCN42 DMUB register list.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pengpeng Hou [Tue, 24 Mar 2026 08:51:30 +0000 (16:51 +0800)]
drm/amd/display: bios_parser: fix GPIO I2C line off-by-one
get_gpio_i2c_info() computes the number of GPIO I2C assignment records
present in the BIOS table and then uses bfI2C_LineMux as an array index
into header->asGPIO_Info[]. The current check only rejects values
strictly larger than the record count, so an index equal to count still
falls through and reaches the fixed table one element past the end.
Reject indices at or above the number of available records before using
them as an array index.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Donet Tom [Thu, 26 Mar 2026 12:21:28 +0000 (17:51 +0530)]
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
Fixes: 34a1de0f7935 ("drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole") Reviewed-by: Christian König <christian.koenig@amd.com> Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Thu, 26 Mar 2026 08:09:05 +0000 (13:39 +0530)]
drm/amdgpu/userq: Fix the code alignment for readability
Fix the code alignment for if condition and also provide
a line space between multiline if condition and next
statement.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junrui Luo [Sat, 14 Mar 2026 15:33:53 +0000 (23:33 +0800)]
drm/amdgpu/userq: fix memory leak in MQD creation error paths
In mes_userq_mqd_create(), the memdup_user() allocations for
IP-specific MQD structs are not freed when subsequent VA validation
fails. The goto free_mqd label only cleans up the MQD BO object and
userq_props.
Fix by adding kfree() before each goto free_mqd on VA validation
failure in the COMPUTE, GFX, and SDMA branches.
Fixes: 9e46b8bb0539 ("drm/amdgpu: validate userq buffer virtual address and size") Reported-by: Yuhao Jiang <danisjiang@gmail.com> Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Donet Tom [Mon, 23 Mar 2026 04:28:38 +0000 (09:58 +0530)]
drm/amd: Fix MQD and control stack alignment for non-4K
For gfxV9, due to a hardware bug ("based on the comments in the code
here [1]"), the control stack of a user-mode compute queue must be
allocated immediately after the page boundary of its regular MQD buffer.
To handle this, we allocate an enlarged MQD buffer where the first page
is used as the MQD and the remaining pages store the control stack.
Although these regions share the same BO, they require different memory
types: the MQD must be UC (uncached), while the control stack must be
NC (non-coherent), matching the behavior when the control stack is
allocated in user space.
This logic works correctly on systems where the CPU page size matches
the GPU page size (4K). However, the current implementation aligns both
the MQD and the control stack to the CPU PAGE_SIZE. On systems with a
larger CPU page size, the entire first CPU page is marked UC—even though
that page may contain multiple GPU pages. The GPU treats the second 4K
GPU page inside that CPU page as part of the control stack, but it is
incorrectly mapped as UC.
This patch fixes the issue by aligning both the MQD and control stack
sizes to the GPU page size (4K). The first 4K page is correctly marked
as UC for the MQD, and the remaining GPU pages are marked NC for the
control stack. This ensures proper memory type assignment on systems
with larger CPU page sizes.
Acked-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Donet Tom [Mon, 23 Mar 2026 04:28:35 +0000 (09:58 +0530)]
drm/amdkfd: Align expected_queue_size to PAGE_SIZE
The AQL queue size can be 4K, but the minimum buffer object (BO)
allocation size is PAGE_SIZE. On systems with a page size larger
than 4K, the expected queue size does not match the allocated BO
size, causing queue creation to fail.
Align the expected queue size to PAGE_SIZE so that it matches the
allocated BO size and allows queue creation to succeed.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Wed, 25 Mar 2026 09:20:41 +0000 (17:20 +0800)]
drm/amd/pm: Use str_enabled_disabled in amdgpu_pm sysfs
Coccinelle flags hand-rolled "enabled"/"disabled" strings; use the shared
str_enabled_disabled() helper from string_choices.h for npm_status and
thermal throttling logging sysfs text.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202603251434.zIN2QYWn-lkp@intel.com/ Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse Zhang [Tue, 24 Mar 2026 09:31:43 +0000 (17:31 +0800)]
drm/amdgpu: flush coredump work before HW teardown
In amdgpu_device_fini_hw(), deferred coredump formatting work may still
be pending when hardware and IP components are being torn down. Since
the work may access device registers and memory that will be freed or
powered off, it must be completed before proceeding.
Add a flush_work() call for adev->coredump_work, guarded by
CONFIG_DEV_COREDUMP, to ensure any pending coredump work finishes
before the device enters the early IP fini stage.
This avoids potential use-after-free or accessing hardware resources
that are no longer available.
Jesse Zhang [Tue, 24 Mar 2026 07:28:59 +0000 (15:28 +0800)]
drm/amdgpu: guard atom_context in devcoredump VBIOS dump
During GPU reset coredump generation, amdgpu_devcoredump_fw_info() unconditionally
dereferences adev->mode_info.atom_context to print VBIOS fields. On reset/teardown
paths this pointer can be NULL, causing a kernel page fault from the deferred
coredump workqueue.
Fix by checking ctx before printing VBIOS fields:
if ctx is valid, print full VBIOS information as before;
This prevents NULL-dereference crashes while preserving coredump output.
Sunil Khatri [Tue, 24 Mar 2026 14:58:54 +0000 (20:28 +0530)]
drm/amdgpu/userq: amdgpu_userq_vm_validate does not need userq mutex
amdgpu_userq_vm_validate function does not need userq_mutex and exec
lock is good enough to locking all bos and updating the eviction fence.
Also since we only need userq_mutex for amdgpu_userq_restore_all
so move the locks in the function itself.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junrui Luo [Tue, 24 Mar 2026 09:39:02 +0000 (17:39 +0800)]
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
Fixes: f09c1e6077ab ("drm/amdgpu: generate doorbell index for userqueue") Reported-by: Yuhao Jiang <danisjiang@gmail.com> Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arvind Yadav [Thu, 26 Mar 2026 13:08:38 +0000 (18:38 +0530)]
drm/xe/madvise: Accept canonical GPU addresses in xe_vm_madvise_ioctl
Userspace passes canonical (sign-extended) GPU addresses where bits 63:48
mirror bit 47. The internal GPUVM uses non-canonical form (upper bits
zeroed), so passing raw canonical addresses into GPUVM lookups causes
mismatches for addresses above 128TiB.
Strip the sign extension with xe_device_uncanonicalize_addr() at the
top of xe_vm_madvise_ioctl(). Non-canonical addresses are unaffected.
Fixes: ada7486c5668 ("drm/xe: Implement madvise ioctl for xe") Suggested-by: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-13-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:37 +0000 (18:38 +0530)]
drm/xe/madvise: Enable purgeable buffer object IOCTL support
Hook the madvise_purgeable() handler into the madvise IOCTL now that all
supporting infrastructure is complete:
- Core purge implementation (patch 3)
- BO state tracking and helpers (patches 1-2)
- Per-VMA purgeable state tracking (patch 6)
- Shrinker integration for memory reclamation (patch 10)
This final patch enables userspace to use the
DRM_XE_VMA_ATTR_PURGEABLE_STATE madvise type to mark buffers as
WILLNEED/DONTNEED and receive the retained status indicating whether
buffers were purged.
The feature was kept disabled in earlier patches to maintain
bisectability and ensure all components are in place before exposing to
userspace.
Userspace can detect kernel support for purgeable BOs by checking the
DRM_XE_QUERY_CONFIG_FLAG_HAS_PURGING_SUPPORT flag in the query_config
response.
Suggested-by: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-12-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:36 +0000 (18:38 +0530)]
drm/xe/bo: Add purgeable shrinker state helpers
Encapsulate TTM purgeable flag updates and shrinker page accounting
into helper functions to prevent desynchronization between the TTM
tt->purgeable flag and the shrinker's page bucket counters.
Without these helpers, direct manipulation of xe_ttm_tt->purgeable
risks forgetting to update the corresponding shrinker counters,
leading to incorrect memory pressure calculations.
Update purgeable BO state to PURGED after successful shrinker purge
for DONTNEED BOs.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-11-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:35 +0000 (18:38 +0530)]
drm/xe/dma_buf: Block export of DONTNEED/purged BOs
Don't allow exporting BOs marked DONTNEED or PURGED as dma-bufs.
DONTNEED BOs can have their contents discarded at any time, making
the exported dma-buf unusable for external devices. PURGED BOs have
no backing store and are permanently invalid.
Return -EBUSY for DONTNEED BOs (temporary purgeable state) and
-EINVAL for purged BOs (permanent, no backing store).
The export path now checks the BO's purgeable state before creating
the dma-buf, preventing external devices from accessing memory that
may be purged at any time.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-10-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:34 +0000 (18:38 +0530)]
drm/xe/bo: Block mmap of DONTNEED/purged BOs
Don't allow new CPU mmaps to BOs marked DONTNEED or PURGED.
DONTNEED BOs can have their contents discarded at any time, making
CPU access undefined behavior. PURGED BOs have no backing store and
are permanently invalid.
Return -EBUSY for DONTNEED BOs (temporary purgeable state) and
-EINVAL for purged BOs (permanent, no backing store).
The mmap offset ioctl now checks the BO's purgeable state before
allowing userspace to establish a new CPU mapping. This prevents
the race where userspace gets a valid offset but the BO is purged
before actual faulting begins.
Existing mmaps (established before DONTNEED) may still work until
pages are purged, at which point CPU faults fail with SIGBUS.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-9-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:33 +0000 (18:38 +0530)]
drm/xe/madvise: Block imported and exported dma-bufs
Prevent marking imported or exported dma-bufs as purgeable.
External devices may be accessing these buffers without our
knowledge, making purging unsafe.
Check drm_gem_is_imported() for buffers created by other
drivers and obj->dma_buf for buffers exported to other
drivers. Silently skip these BOs during madvise processing.
This follows drm_gem_shmem's purgeable implementation and
prevents data corruption from purging actively-used shared
buffers.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-8-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:32 +0000 (18:38 +0530)]
drm/xe/madvise: Implement per-VMA purgeable state tracking
Track purgeable state per-VMA instead of using a coarse shared
BO check. This prevents purging shared BOs until all VMAs across
all VMs are marked DONTNEED.
Add xe_bo_all_vmas_dontneed() to check all VMAs before marking
a BO purgeable. Add xe_bo_recheck_purgeable_on_vma_unbind() to
handle state transitions when VMAs are destroyed - if all
remaining VMAs are DONTNEED the BO can become purgeable, or if
no VMAs remain it transitions to WILLNEED.
The per-VMA purgeable_state field stores the madvise hint for
each mapping. Shared BOs can only be purged when all VMAs
unanimously indicate DONTNEED.
This prevents the bug where unmapping the last VMA would incorrectly
flip a DONTNEED BO back to WILLNEED. The enum-based state check
preserves BO state when no VMAs remain, only updating when VMAs provide
explicit hints.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-7-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:31 +0000 (18:38 +0530)]
drm/xe/vm: Prevent binding of purged buffer objects
Add purge checking to vma_lock_and_validate() to block new mapping
operations on purged BOs while allowing cleanup operations to proceed.
Purged BOs have their backing pages freed by the kernel. New
mapping operations (MAP, PREFETCH, REMAP) must be rejected with
-EINVAL to prevent GPU access to invalid memory. Cleanup
operations (UNMAP) must be allowed so applications can release
resources after detecting purge via the retained field.
REMAP operations require mixed handling - reject new prev/next
VMAs if the BO is purged, but allow the unmap portion to proceed
for cleanup.
The check_purged flag in struct xe_vma_lock_and_validate_flags
distinguishes between these cases: true for new mappings (must reject),
false for cleanup (allow).
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-6-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:30 +0000 (18:38 +0530)]
drm/xe/bo: Block CPU faults to purgeable buffer objects
Block CPU page faults to buffer objects marked as purgeable (DONTNEED)
or already purged. Once a BO is marked DONTNEED, its contents can be
discarded by the kernel at any time, making access undefined behavior.
Return VM_FAULT_SIGBUS immediately to fail consistently instead of
allowing erratic behavior where access sometimes works (if not yet
purged) and sometimes fails (if purged).
For DONTNEED BOs:
- Block new CPU faults with SIGBUS to prevent undefined behavior.
- Existing CPU PTEs may still work until TLB flush, but new faults
fail immediately.
For PURGED BOs:
- Backing store has been reclaimed, making CPU access invalid.
- Without this check, accessing existing mmap mappings would trigger
xe_bo_fault_migrate() on freed backing store, causing kernel hangs
or crashes.
The purgeable check is added to both CPU fault paths:
- Fastpath (xe_bo_cpu_fault_fastpath): Returns VM_FAULT_SIGBUS
immediately under dma-resv lock, preventing attempts to
migrate/validate DONTNEED/purged pages.
- Slowpath (xe_bo_cpu_fault): Returns -EFAULT under drm_exec lock,
converted to VM_FAULT_SIGBUS.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-5-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:29 +0000 (18:38 +0530)]
drm/xe/madvise: Implement purgeable buffer object support
This allows userspace applications to provide memory usage hints to
the kernel for better memory management under pressure:
Add the core implementation for purgeable buffer objects, enabling
memory reclamation of user-designated DONTNEED buffers during eviction.
This patch implements the purge operation and state machine transitions:
Purgeable States (from xe_madv_purgeable_state):
- WILLNEED (0): BO should be retained, actively used
- DONTNEED (1): BO eligible for purging, not currently needed
- PURGED (2): BO backing store reclaimed, permanently invalid
Design Rationale:
- Async TLB invalidation via trigger_rebind (no blocking
xe_vm_invalidate_vma)
- i915 compatibility: retained field, "once purged always purged"
semantics
- Shared BO protection prevents multi-process memory corruption
- Scratch PTE reuse avoids new infrastructure, safe for fault mode
Note: The madvise_purgeable() function is implemented but not hooked
into the IOCTL handler (madvise_funcs[] entry is NULL) to maintain
bisectability. The feature will be enabled in the final patch when all
supporting infrastructure (shrinker, per-VMA tracking) is complete.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-4-arvind.yadav@intel.com
Arvind Yadav [Thu, 26 Mar 2026 13:08:28 +0000 (18:38 +0530)]
drm/xe/bo: Add purgeable bo state tracking and field madv to xe_bo
Add infrastructure for tracking purgeable state of buffer objects.
This includes:
Introduce enum xe_madv_purgeable_state with three states:
- XE_MADV_PURGEABLE_WILLNEED (0): BO is needed and should not be
purged. This is the default state for all BOs.
- XE_MADV_PURGEABLE_DONTNEED (1): BO is not currently needed and
can be purged by the kernel under memory pressure to reclaim
resources. Only non-shared BOs can be marked as DONTNEED.
- XE_MADV_PURGEABLE_PURGED (2): BO has been purged by the kernel.
Accessing a purged BO results in error. Follows i915 semantics
where once purged, the BO remains permanently invalid ("once
purged, always purged").
Add madv_purgeable field to struct xe_bo for state tracking
of purgeable state across concurrent access paths
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-3-arvind.yadav@intel.com
drm/xe/uapi: Add UAPI support for purgeable buffer objects
Extend the DRM_XE_MADVISE ioctl to support purgeable buffer object
management by adding DRM_XE_VMA_ATTR_PURGEABLE_STATE attribute type.
This allows userspace applications to provide memory usage hints to
the kernel for better memory management under pressure:
- WILLNEED: Buffer is needed and should not be purged. If the BO was
previously purged, retained field returns 0 indicating backing store
was lost (once purged, always purged semantics matching i915).
- DONTNEED: Buffer is not currently needed and may be purged by the
kernel under memory pressure to free resources. Only applies to
non-shared BOs.
To prevent undefined behavior, the following operations are blocked
while a BO is in DONTNEED state:
- New mmap() operations return -EBUSY
- VM_BIND operations return -EBUSY
- New dma-buf exports return -EBUSY
- CPU page faults return SIGBUS
- GPU page faults fail with -EACCES
This ensures applications cannot use a BO while marked as DONTNEED,
preventing erratic behavior when the kernel purges the backing store.
The implementation includes a 'retained' output field (matching i915's
drm_i915_gem_madvise.retained) that indicates whether the BO's backing
store still exists (1) or has been purged (0).
Added DRM_XE_QUERY_CONFIG_FLAG_HAS_PURGING_SUPPORT flag to allow
userspace to detect kernel support for purgeable buffer objects
before attempting to use the feature.
Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Arvind Yadav <arvind.yadav@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260326130843.3545241-2-arvind.yadav@intel.com
Dave Airlie [Fri, 27 Mar 2026 02:45:28 +0000 (12:45 +1000)]
Merge tag 'drm-misc-next-2026-03-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
These guards appear to be leftovers from file renames or copy-paste
errors. Correcting them to follow the standard convention of matching
the file name prevents potential include guard collisions.
Matthew Brost [Thu, 26 Mar 2026 01:12:07 +0000 (18:12 -0700)]
drm/xe: Issue GGTT invalidation under lock in ggtt_node_remove
Async work (e.g., GuC queue teardowns) can call ggtt_node_remove, so the
operation must be performed under the GGTT lock to ensure the GGTT
online check remains stable. GGTT insertion and removal are heavyweight
operations (e.g., queue create/destroy), so the additional serialization
cost is negligible compared to ensuring correctness.
Laurent Pinchart [Mon, 23 Mar 2026 16:45:26 +0000 (18:45 +0200)]
drm: rcar-du: Don't leak device_link to CMM
The DU driver creates device_link instances between the DU and CMMs, but
never deletes them. Fix it by introducing a rcar_du_cmm structure to
group the CMM device and device_link, and deleting the links at cleanup
time.
Laurent Pinchart [Mon, 23 Mar 2026 16:45:24 +0000 (18:45 +0200)]
drm: rcar-du: Store CMM device pointer instead of platform_device
The DU driver stores the CMM devices as pointers to struct
platform_device, and passes them to the API exposed by the CMM driver.
This is similar to how the VSP is handled, except that the VSP uses
struct device pointers. Replace the CMM platform_device pointers with
device pointers for consistency.
Laurent Pinchart [Mon, 23 Mar 2026 16:45:23 +0000 (18:45 +0200)]
drm: rcar-du: Ensure correct suspend/resume ordering with VSP
The VSP serves as an interface to memory and a compositor to the DU. It
therefore needs to be suspended after and resumed before the DU, to be
properly stopped and restarted in a controlled fashion driven by the DU
driver. This currently works by chance. Avoid relying on luck by
enforcing the correct suspend/resume ordering with device links.
Mithil Bavishi [Tue, 3 Mar 2026 20:30:13 +0000 (15:30 -0500)]
dt-bindings: display: panel-lvds: Add compatibles for Samsung LTN070NL01 and LTN101AL03 panels
The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT
display panel
The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT
display panel
The prepare timing specified by the G190EAN01 datasheet should be
between 30 and 50 ms. Considering it might take some time for the
LVDS encoder to enable the signal, we should only wait the min.
required time in the panel driver and not the max. allowed time.
Fixes: 2f7b832fc992 ("drm/panel: simple: Add support for AUO G190EAN01 panel") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com
Val Packett [Tue, 17 Feb 2026 07:00:12 +0000 (04:00 -0300)]
drm/panel: himax-hx83102: Add support for DSI DCS backlight control
The HTF065H045 panel based on the HX83102 controller does use DCS
commands for controlling backlight brightness. Make the driver fall back
to DCS when no external backlight has been defined in the device tree,
like many other drivers do.
Val Packett [Tue, 17 Feb 2026 07:00:11 +0000 (04:00 -0300)]
drm/panel: himax-hx83102: Add support for Holitech HTF065H045
This 720x1600 panel is found in several Motorola/Lenovo smartphones like
the Moto G9 Play (guamp). The initialization sequence is based on the
datasheet. Add it to the existing HX83102 panel driver.
Dmitry Baryshkov [Mon, 23 Mar 2026 01:21:49 +0000 (03:21 +0200)]
drm/panel: sharp-ls043t1le01: make use of prepare_prev_first
The DSI link must be powered up to let panel driver to talk to the panel
during prepare() callback execution. Set the prepare_prev_first flag to
guarantee this.
Fixes: 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260323-panel-fix-v1-1-9f12b09161e8@oss.qualcomm.com
dt-bindings: display: panel: Align style of "true" properties
For code readability, several bindings which list allowed properties
with ": true" syntax group them in one place, without line breaks
between each. Align a few bindings to match this style. No functional
impact.
Add support for the Rocktech RK050HR345-CT106A panel based on the
Ilitek ILI9806E controller using the SPI bus.
The driver is designed to be easily extensible to support other panels
with different initialization sequences and display timings by
providing a specific descriptor structure for each model.
Dario Binacchi [Wed, 18 Mar 2026 07:32:51 +0000 (08:32 +0100)]
drm/panel: ilitek-ili9806e: split core and DSI logic
Split the driver to support multiple transport buses. The core logic
(power, GPIO, backlight) is moved to a dedicated core module, while
DSI-specific code is restricted to the DSI module.
Introduce DRM_PANEL_ILITEK_ILI9806E_CORE as a hidden Kconfig symbol
selected by the bus-specific configuration.
Dario Binacchi [Wed, 18 Mar 2026 07:32:50 +0000 (08:32 +0100)]
drm/panel: ilitek-ili9806e: rename to specific DSI driver
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Pengyu Luo [Mon, 16 Mar 2026 08:40:40 +0000 (16:40 +0800)]
drm/panel: Add Himax HX83121A panel driver
Add a driver for panels using the Himax HX83121A Display Driver IC,
including support for the BOE/CSOT PPC357DB1-4, found in HUAWEI
Matebook E Go series (Gaokun2/3).
Chen-Yu Tsai [Tue, 17 Mar 2026 04:00:32 +0000 (12:00 +0800)]
drm/gem-dma: set VM_DONTDUMP for mmap
When the mmap function was converted from a file op to a GEM object
function in commit f5ca8eb6f9bd ("drm/cma-helper: Implement mmap as GEM
CMA object functions") some VM flags were not lifted from drm_gem_mmap():
- VM_IO
- VM_DONTEXPAND
- VM_DONTDUMP
VM_DONTEXPAND was added back in commit 59f39bfa6553 ("drm/cma-helper:
Set VM_DONTEXPAND for mmap"). VM_IO doesn't make sense since these are
memory buffers, while "IO tells people not to look at these pages
(accesses can have side effects)".
Add back VM_DONTDUMP. This matches the behavior of most other GEM
implementations.
Francois Dugast [Wed, 25 Mar 2026 16:01:52 +0000 (17:01 +0100)]
drm/xe: Add new SVM copy GT stats per size
Breakdown the GT stats for copy to host and copy to device per size (4K,
64K 2M) to make it easier for user space to track memory migrations.
This is helpful to verify allocation alignment is correct when porting
applications to SVM.
Jonathan Cavitt [Tue, 24 Mar 2026 15:29:40 +0000 (15:29 +0000)]
drm/xe/xe_vm: Implement xe_vm_get_property_ioctl
Add support for userspace to request a list of observed faults
from a specified VM.
v2:
- Only allow querying of failed pagefaults (Matt Brost)
v3:
- Remove unnecessary size parameter from helper function, as it
is a property of the arguments. (jcavitt)
- Remove unnecessary copy_from_user (Jainxun)
- Set address_precision to 1 (Jainxun)
- Report max size instead of dynamic size for memory allocation
purposes. Total memory usage is reported separately.
v4:
- Return int from xe_vm_get_property_size (Shuicheng)
- Fix memory leak (Shuicheng)
- Remove unnecessary size variable (jcavitt)
v5:
- Rename ioctl to xe_vm_get_faults_ioctl (jcavitt)
- Update fill_property_pfs to eliminate need for kzalloc (Jianxun)
v6:
- Repair and move fill_faults break condition (Dan Carpenter)
- Free vm after use (jcavitt)
- Combine assertions (jcavitt)
- Expand size check in xe_vm_get_faults_ioctl (jcavitt)
- Remove return mask from fill_faults, as return is already -EFAULT or 0
(jcavitt)
v7:
- Revert back to using xe_vm_get_property_ioctl
- Apply better copy_to_user logic (jcavitt)
v8:
- Fix and clean up error value handling in ioctl (jcavitt)
- Reapply return mask for fill_faults (jcavitt)
v9:
- Future-proof size logic for zero-size properties (jcavitt)
- Add access and fault types (Jianxun)
- Remove address type (Jianxun)
v10:
- Remove unnecessary switch case logic (Raag)
- Compress size get, size validation, and property fill functions into a
single helper function (jcavitt)
- Assert valid size (jcavitt)
Jonathan Cavitt [Tue, 24 Mar 2026 15:29:39 +0000 (15:29 +0000)]
drm/xe/xe_vm: Add per VM fault info
Add additional information to each VM so they can report up to the first
50 seen faults. Only pagefaults are saved this way currently, though in
the future, all faults should be tracked by the VM for future reporting.
Additionally, of the pagefaults reported, only failed pagefaults are
saved this way, as successful pagefaults should recover silently and not
need to be reported to userspace.
v2:
- Free vm after use (Shuicheng)
- Compress pf copy logic (Shuicheng)
- Update fault_unsuccessful before storing (Shuicheng)
- Fix old struct name in comments (Shuicheng)
- Keep first 50 pagefaults instead of last 50 (Jianxun)
v4:
- Rename xe_vm.pfs to xe_vm.faults (jcavitt)
- Store fault data and not pagefault in xe_vm faults list (jcavitt)
- Store address, address type, and address precision per fault (jcavitt)
- Store engine class and instance data per fault (Jianxun)
- Add and fix kernel docs (Michal W)
- Properly handle kzalloc error (Michal W)
- s/MAX_PFS/MAX_FAULTS_SAVED_PER_VM (Michal W)
- Store fault level per fault (Micahl M)
v5:
- Store fault and access type instead of address type (Jianxun)
v6:
- Store pagefaults in non-fault-mode VMs as well (Jianxun)
v7:
- Fix kernel docs and comments (Michal W)
v8:
- Fix double-locking issue (Jianxun)
v9:
- Do not report faults from reserved engines (Jianxun)
v14:
- Correctly ignore fault mode in save_pagefault_to_vm (jcavitt)
v15:
- s/save_pagefault_to_vm/xe_pagefault_save_to_vm (Matt Brost)
- Use guard instead of spin_lock/unlock (Matt Brost)
- GT was added to xe_pagefault struct. Use xe_gt_hw_engine
instead of creating a new helper function (Matt Brost)
v16:
- Set address precision programmatically (Matt Brost)
v17:
- Set address precision to fixed value (Matt Brost)
v18:
- s/uAPI/Link in commit log links
- Use kzalloc_obj
Link: https://github.com/intel/compute-runtime/pull/878 Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Suggested-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: Shuicheng Lin <shuicheng.lin@intel.com> Cc: Jianxun Zhang <jianxun.zhang@intel.com> Cc: Michal Wajdeczko <Michal.Wajdeczko@intel.com> Cc: Michal Mzorek <michal.mzorek@intel.com> Cc: Ivan Briano <ivan.briano@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260324152935.72444-9-jonathan.cavitt@intel.com
projects / thirdparty / kernel / linux.git / log
