The function `write_midx_included_packs()` manages the lifecycle of
writing packs to stdin when running `git multi-pack-index write` as a
child process.
Extract a standalone `repack_fill_midx_stdin_packs()` helper, which
handles `--stdin-packs` argument setup, starting the command, writing
pack names to its standard input, and finishing the command.
This simplifies `write_midx_included_packs()` and prepares for a
subsequent commit where the same helper is called with `cmd->out = -1`
to capture the MIDX's checksum from the command's standard output,
which is needed when writing MIDX layers with `--no-write-chain-file`.
No functional changes are included in this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:58:03 +0000 (11:58 -0400)]
repack-midx: factor out `repack_prepare_midx_command()`
The `write_midx_included_packs()` function assembles and executes a
`git multi-pack-index write` command, constructing the argument list
inline.
Future commits will introduce additional callers that need to construct
similar `git multi-pack-index` commands (for both `write` and `compact`
subcommands), so extract the common portions of the command setup into a
reusable `repack_prepare_midx_command()` helper.
The extracted helper sets `git_cmd`, pushes `multi-pack-index` and a
subcommand, and handles `--progress`/`--no-progress` and `--bitmap`
flags. The remaining arguments that are specific to the `write`
subcommand (such as `--stdin-packs`) are left to the caller.
No functional changes are included in this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:58:00 +0000 (11:58 -0400)]
midx: expose `midx_layer_contains_pack()`
Rename the function `midx_contains_pack_1()` to instead be called
`midx_layer_contains_pack()` and make it accessible. Unlike
`midx_contains_pack()` (which recurses through the entire chain), this
function checks only a single MIDX layer.
This will be used by a subsequent commit to determine whether a given
pack belongs to the tip MIDX layer specifically, rather than to any
layer in the chain.
No functional changes are present in this commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:57 +0000 (11:57 -0400)]
repack: track the ODB source via existing_packs
Store the ODB source in the `existing_packs` struct and use that in
place of the raw `repo->objects->sources` access within `cmd_repack()`.
The source used is still assigned from the first source in the list, so
there are no functional changes in this commit. The changes instead
serve two purposes (one immediate, one not):
- The incremental MIDX-based repacking machinery will need to know what
source is being used to read the existing MIDX/chain (should one
exist).
- In the future, if "git repack" is taught how to operate on other
object sources, this field will serve as the authoritative value for
that source.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:54 +0000 (11:57 -0400)]
midx: support custom `--base` for incremental MIDX writes
Both `compact` and `write --incremental` fix the base of the resulting
MIDX layer: `compact` always places the compacted result on top of
"from's" immediate parent in the chain, and `write --incremental` always
appends a new layer to the existing tip. In both cases the base is not
configurable.
Future callers need additional flexibility. For instance, the incremental
MIDX-based repacking code may wish to write a layer based on some
intermediate ancestor rather than the current tip, or produce a root
layer when replacing the bottommost entries in the chain.
Introduce a new `--base` option for both subcommands to specify the
checksum of the MIDX layer to use as the base. The given checksum must
refer to a valid layer in the MIDX chain that is an ancestor of the
topmost layer being written or compacted.
The special value "none" is accepted to produce a root layer with no
parent. This will be needed when the incremental repacking machinery
determines that the bottommost layers of the chain should be replaced.
If no `--base` is given, behavior is unchanged: `compact` uses "from's"
immediate parent in the chain, and `write` appends to the existing tip.
For the `write` subcommand, `--base` requires `--no-write-chain-file`. A plain
`write --incremental` appends a new layer to the live chain tip with no
mechanism to atomically replace it; overriding the base would produce a
layer that does not extend the tip, breaking chain invariants. With
`--no-write-chain-file` the chain is left unmodified and the caller is
responsible for assembling a valid chain.
For `compact`, no such restriction applies. The compaction operation
atomically replaces the compacted range in the chain file, so writing
the result on top of any valid ancestor preserves chain invariants.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:51 +0000 (11:57 -0400)]
midx: introduce `--no-write-chain-file` for incremental MIDX writes
When writing an incremental MIDX layer, the MIDX machinery writes the
new layer into the multi-pack-index.d directory and then updates the
multi-pack-index-chain file to include the freshly written layer.
Future callers however may not wish to immediately update the MIDX chain
itself, preferring instead to write out new layer(s) themselves before
atomically updating the chain. Concretely, the new incremental
MIDX-based repacking strategy will want to do exactly this (that is,
assemble the new MIDX chain itself before writing a new chain file and
atomically linking it into place).
Introduce a `--no-write-chain-file` flag that:
* writes the new MIDX layer into the multi-pack-index.d directory
* prints its checksum
* does not update the multi-pack-index-chain file.
The MIDX chain file (and thus, the lock protecting it) remain untouched,
allowing callers to assemble the chain themselves. This flag requires
`--incremental`, since the notion of a separate layer only makes sense
for incremental MIDXs.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:48 +0000 (11:57 -0400)]
midx: use `strvec` for `keep_hashes`
The `keep_hashes` array in `write_midx_internal()` accumulates the
checksums of MIDX files that should be retained when pruning stale
entries from the MIDX chain. For similar reasons as in a previous
commit, rewrite this using a strvec, requiring us to pass one fewer
parameter.
Unlike the aforementioned previous commit, use a `strvec` instead of a
`string_list`, which provides a more ergonomic interface to adjust the
values at a particular index. The ordering is important here, as this
value is used to determine the contents of the resulting
`multi-pack-index-chain` file when writing with "--incremental".
Since the previous commit already builds the array in forward order, the
conversion is straightforward: replace indexed assignments with
`strvec_push()`, drop the pre-counting and `CALLOC_ARRAY()`, and
simplify cleanup via `strvec_clear()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:45 +0000 (11:57 -0400)]
midx: build `keep_hashes` array in order
Instead of filling the keep_hashes array using reverse indexing (e.g.,
`keep_hashes[count - i - 1]`) while traversing linked lists forward,
collect linked list nodes into a temporary `layers` array and then
iterate it backwards to fill `keep_hashes` sequentially.
This makes the filling logic easier to follow, since each segment of the
array is filled with a simple forward-marching index. Moreover, this
change prepares us for a subsequent commit that will switch to using a
`strvec`.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:42 +0000 (11:57 -0400)]
midx: use `strset` for retained MIDX files
Both `clear_midx_files_ext()` and `clear_incremental_midx_files_ext()`
build a list of filenames to keep while pruning stale MIDX files. Today
they hand-roll an array instead of using a `strset`, thus requiring us
to pass an additional length parameter, and makes lookups linear.
Replace the bare array with a `strset` which can be passed around as a
single parameter. Though it improves lookup performance, the difference
is likely immeasurable given how small the keep_hashes array typically
is.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 19 May 2026 15:57:39 +0000 (11:57 -0400)]
midx-write: handle noop writes when converting incremental chains
When updating a MIDX, we optimize out writes that will result in an
identical MIDX as the one we already have on disk. See b3bab9d2729
(midx-write: extract function to test whether MIDX needs updating,
2025-12-10) for more details on exactly which writes are optimized out.
If `midx_needs_update()` can't rule out any of the obvious cases (e.g.,
the checksum is invalid, we're requesting a different version, or
performing compaction which always requires an update), then we compare
the packs we're writing to the packs we already know about. If there are
an equal number of packs being written as there are in any existing
MIDX layer(s), then we compare the packs by their name.
This comparison fails when we have an incremental MIDX chain with
at least two layers, since we do not recursively peel through earlier
layers, instead treating the `->pack_names` array of the tip MIDX layer
as containing all `m->num_packs + m->num_packs_in_base` packs.
Adjust this to instead look through the MIDX layers one by one when
comparing pack names. While we're at it, fix a typo above in the same
function.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
6cc6d1b4c699 (Documentation: update add --force option + ignore=all
config, 2026-02-06) added text describing both the ignore=none and
ignore=all behaviors. The former had minor formatting and grammatical
errors, while the latter was a bit garbled. I have tried to tweak the
wording on the latter to make it read as I think was intended, and fixed
the minor grammatical issues with both as well.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: fix self-referential config in sendemail.smtpSSLClientKey
a8215a205141 (send-email: add client certificate options, 2026-03-02)
added documentation for sendemail.smtpSSLClientKey that says it works
"in conjunction with `sendemail.smtpSSLClientKey`" -- referring to
itself. It appears that `sendemail.smtpSSLClientCert` was the intended
reference; fix it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 16 Apr 2026 20:06:59 +0000 (16:06 -0400)]
MIDX: revert the default version to v1
We introduced midx version 2 in b2ec8e90c2 (midx: do not require packs
to be sorted in lexicographic order, 2026-02-24) and now write it by
default. The rationale was that older versions should ignore the v2 midx
and fall back to using the packs (just like we do for other midx
errors). Unfortunately this is not the case, as we have a hard die()
when we see an unknown midx version.
As a result, writing a midx with Git 2.54-rc2 puts the repository into a
state that is unusable with Git 2.53. And this midx write may happen
behind the scenes as part of normal operations, like fetch.
Let's switch back to writing v1 by default to avoid regressing the case
where multiple versions of Git are used on the same repository.
There is one gotcha, though: the v2 format is required for some new
features, like midx compaction, and running "git multi-pack-index
compact" will complain when asked to write a v1 index. The user must set
midx.version to "2" to make the feature work.
So instead of always using v1, we'll base the default on whether the
requested feature requires v2. That does mean that running midx
compaction will create a repository that can't be read by older versions
of Git. But we never do that by default; only people experimenting with
the new feature will be affected.
We have to adjust the test expectation in t5319, since it will now
generate v1 files. And our "auto-select v2" is covered by the tests in
t5335, which continue to check that compaction works without having to
set midx.version manually (and also explicitly check that asking for v1
with compaction reports the problem).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- correct translation of pathspec msgs
Corrects cases where the “pathspec” is translated as if it was a
path
- correct translation of refspec msgs
Corrects cases where the “refspec” were not consistently translated
- correct translation of credential msgs
Corrects cases where the “credential” were not correctly translated
Signed-off-by: Stefan Björnelund <stefan.bjornelund.gnome@gmail.com> Modified-by: Peter Krefting <peter@softwolves.pp.se>
Originally-authored-by: dependabot[bot] <support@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 11 Apr 2026 21:55:18 +0000 (17:55 -0400)]
gitglossary: fix indentation of sub-lists
The glossary entry is a list of terms and their definitions, so
multi-paragraph definitions need "+" continuation lines to indicate
that they are part of a single entry.
When an entry contains a sub-list (say, a bulleted list), the final "+"
may become ambiguous: is it connecting the next paragraph to the final
entry of the sub-list, or to the original list of definition paragraphs?
Asciidoc generally connects it to the former, even when we mean the
latter, and you end up with the next paragraph indented incorrectly,
like this:
glob
...defines glob...
Two consecutive asterisks ("**") in patterns matched
against full pathname may have special meaning:
- ...some special meaning of **...
- ...another special meaning of **...
- Other consecutive asterisks are considered invalid.
Glob magic is incompatible with literal magic.
That final "Glob magic is incompatible" paragraph is in the wrong spot.
It should be at the same level as "Two consecutive asterisks", as it is
not part of the final "Other consecutive asterisks" bullet point.
The same problem appears in several other spots in the glossary.
Usually we'd fix this by using "--" markers, which put the sub-list into
its own block. But there's a catch: in some of these spots we are
already in an open block, and nesting open blocks is a problem. It seems
to work for me using Asciidoc 10.2.1, but Asciidoctor 2.0.26 makes a
mess of it (our intent to open a new block seems to close the old one).
Fortunately there's a work-around: when using a "+" list-continuation,
the number of empty lines above the continuation indicates which level
of parent list to continue. So by adding an empty line after our
unordered list (before the "+"), we should be able to continue the
definition list item.
But asciidoc being asciidoc, of course that is not the end of the story.
That technique works fine for the "glob" and "attr" lists in this patch,
but under the "refs" item it works for only 1 of the 2 lists! I can't
figure out why, and this may be an asciidoctor bug. But we can work
around it by using "--" open-block markers here, since we're not
already in an open block.
So using the extra blank line for the first two instances, and "--"
markers for the second two, this patch produces identical output from
"doc-diff HEAD^ HEAD" for both --asciidoctor and --asciidoc modes.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 13 Apr 2026 18:24:44 +0000 (11:24 -0700)]
CI: bump actions/checkout from 4 to 5 for rust-analysis job
GitHub Actions started complaining about use of Node.js 20 and I was
wondering why only one job uses actions/checkout@v4, while everybody
else already uses actions/checkout@v5.
It turns out that it is caused by a semantic mismerge between e75cd059 (ci: check formatting of our Rust code, 2025-10-15) that
added a new use of actions/checkout@v4 that happened very close to
another change 63541ed9 (build(deps): bump actions/checkout from 4
to 5, 2025-10-16) that updated all uses of actions/checkout@v4 to
use vactions/checkout@v5.
Update the leftover and the last use of actions/checkout@v4 to use
actions/checkout@v5 to help ourselves to move away from Node.js 20.
I claimed in 3c18135b (doc: am: say that --message-id adds a trailer,
2026-02-09) that `git am --message-id` adds a Git trailer. But that
isn’t the case; for the case of a commit message with a subject, body,
and no trailer block:
It does work for two other cases though, namely subject-only and with an
existing trailer block.
This is at best an inconsistency and arguably a bug, but we’re at the
trailing end of the release cycle now. So reverting the doc is safer
than making msg-id act as a trailer, for now.
Revert this hunk from commit 3c18135b except the only useful
change (“Also use inline-verbatim for `Message-ID`”).
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Apr 2026 23:47:35 +0000 (16:47 -0700)]
Merge branch 'jc/no-writev-does-not-work'
We used writev() in limited code paths and supplied emulation for
platforms without working writev(), but the emulation was too
faithful to the spec to make the result useless to send even 64kB;
revert the topic and plan to restart the effort later.
* jc/no-writev-does-not-work:
Revert "compat/posix: introduce writev(3p) wrapper"
Revert "wrapper: introduce writev(3p) wrappers"
Revert "sideband: use writev(3p) to send pktlines"
Revert "cmake: use writev(3p) wrapper as needed"
Junio C Hamano [Fri, 10 Apr 2026 14:52:50 +0000 (07:52 -0700)]
rust: we are way beyond 2.53
Earlier we timelined that we'd tune our build procedures to build
with Rust by default in Git 2.53, but we are already in prerelease
freeze for 2.54 now. Update the BreakingChanges document to delay
it until Git 2.55 (slated for the end of June 2026).
Noticed-by: brian m. carlson <sandals@crustytoothpaste.net> Helped-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Apr 2026 22:07:12 +0000 (15:07 -0700)]
writev: retract the topic until we have a better emulation
The emulation layer we added for writev(3p) tries to be too faithful
to the spec that on systems with SSIZE_MAX set to lower than 64kB to
fit a single sideband packet would fail just like the real system
writev(), which makes our use of writev() for sideband messages
unworkable.
Let's revert them and reboot the effort after the release. The
reverted commits are:
$ git log -Swritev --oneline 8023abc632^..v2.52.0-rc1 89152af176 cmake: use writev(3p) wrapper as needed 26986f4cba sideband: use writev(3p) to send pktlines 1970fcef93 wrapper: introduce writev(3p) wrappers 3b9b2c2a29 compat/posix: introduce writev(3p) wrapper
8023abc632 is the merge of ps/upload-pack-buffer-more-writes topic to
the mainline.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Apr 2026 18:21:59 +0000 (11:21 -0700)]
Merge branch 'ds/rev-list-maximal-only-optim'
"git rev-list --maximal-only" has been optimized by borrowing the
logic used by "git show-branch --independent", which computes the
same kind of information much more efficiently.
* ds/rev-list-maximal-only-optim:
rev-list: use reduce_heads() for --maximal-only
p6011: add perf test for rev-list --maximal-only
t6600: test --maximal-only and --independent
Junio C Hamano [Thu, 9 Apr 2026 18:21:59 +0000 (11:21 -0700)]
Merge branch 'jk/c23-const-preserving-fixes-more'
Further work to adjust the codebase for C23 that changes functions
like strchr() that discarded constness when they return a pointer into
a const string to preserve constness.
* jk/c23-const-preserving-fixes-more:
git-compat-util: fix CONST_OUTPARAM typo and indentation
refs/files-backend: drop const to fix strchr() warning
http: drop const to fix strstr() warning
range-diff: drop const to fix strstr() warnings
pkt-line: make packet_reader.line non-const
skip_prefix(): check const match between in and out params
pseudo-merge: fix disk reads from find_pseudo_merge()
find_last_dir_sep(): convert inline function to macro
run-command: explicitly cast away constness when assigning to void
pager: explicitly cast away strchr() constness
transport-helper: drop const to fix strchr() warnings
http: add const to fix strchr() warnings
convert: add const to fix strchr() warnings
Jeff King [Wed, 8 Apr 2026 17:20:55 +0000 (13:20 -0400)]
run_processes_parallel(): fix order of sigpipe handling
In commit ec0becacc9 (run-command: add stdin callback for
parallelization, 2026-01-28), we taught run_processes_parallel() to
ignore SIGPIPE, since we wouldn't want a write() to a broken pipe of one
of the children to take down the whole process.
But there's a subtle ordering issue. After we ignore SIGPIPE, we call
pp_init(), which installs its own cleanup handler for multiple signals
using sigchain_push_common(), which includes SIGPIPE. So if we receive
SIGPIPE while writing to a child, we'll trigger that handler first, pop
it off the stack, and then re-raise (which is then ignored because of
the SIG_IGN we pushed first).
But what does that handler do? It tries to clean up all of the child
processes, under the assumption that when we re-raise the signal we'll
be exiting the process!
So a hook that exits without reading all of its input will cause us to
get SIGPIPE, which will put us in a signal handler that then tries to
kill() that same child.
This seems to be mostly harmless on Linux. The process has already
exited by this point, and though kill() does not complain (since the
process has not been reaped with a wait() call), it does not affect the
exit status of the process.
However, this seems not to be true on all platforms. This case is
triggered by t5401.13, "pre-receive hook that forgets to read its
input". This test fails on NonStop since that hook was converted to the
run_processes_parallel() API.
We can fix it by reordering the code a bit. We should run pp_init()
first, and then push our SIG_IGN onto the stack afterwards, so that it
is truly ignored while feeding the sub-processes.
Note that we also reorder the popping at the end of the function, too.
This is not technically necessary, as we are doing two pops either way,
but now the pops will correctly match their pushes.
This also fixes a related case that we can't test yet. If we did have
more than one process to run, then one child causing SIGPIPE would cause
us to kill() all of the children (which might still actually be
running). But the hook API is the only user of the new feed_pipe
feature, and it does not yet support parallel hook execution. So for now
we'll always execute the processes sequentially. Once parallel hook
execution exists, we'll be able to add a test which covers this.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Apr 2026 17:19:18 +0000 (10:19 -0700)]
Merge branch 'tc/replay-ref'
The experimental `git replay` command learned the `--ref=<ref>` option
to allow specifying which ref to update, overriding the default behavior.
* tc/replay-ref:
replay: allow to specify a ref with option --ref
replay: use stuck form in documentation and help message
builtin/replay: mark options as not negatable
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ng/add-files-to-cache-wo-rename'
add_files_to_cache() used diff_files() to detect only the paths that
are different between the index and the working tree and add them,
which does not need rename detection, which interfered with unnecessary
conflicts.
* ng/add-files-to-cache-wo-rename:
read-cache: disable renames in add_files_to_cache
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ps/reftable-portability'
Update reftable library part with what is used in libgit2 to improve
portability to different target codebases and platforms.
* ps/reftable-portability:
reftable/system: add abstraction to mmap files
reftable/system: add abstraction to retrieve time in milliseconds
reftable/fsck: use REFTABLE_UNUSED instead of UNUSED
reftable/stack: provide fsync(3p) via system header
reftable: introduce "reftable-system.h" header
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ps/odb-cleanup'
Various code clean-up around odb subsystem.
* ps/odb-cleanup:
odb: drop unneeded headers and forward decls
odb: rename `odb_has_object()` flags
odb: use enum for `odb_write_object` flags
odb: rename `odb_write_object()` flags
treewide: use enum for `odb_for_each_object()` flags
CodingGuidelines: document our style for flags
Adrian Ratiu [Wed, 8 Apr 2026 16:11:48 +0000 (19:11 +0300)]
t1800: add &&-chains to test helper functions
Add the missing &&'s so we properly propagate failures
between commands in the hook helper functions.
Also add a missing mkdir -p arg (found by adding the &&).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our description of the reftable format is that it is experimental and
subject to change, but that is no longer true. Remove this statement so
as not to mislead users.
In addition, the documentation says that the files format is the
default, but that is not true if breaking changes mode is on. Correct
this information with a conditional.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: avoid ODB transaction when not writing objects
In ce1661f9da (odb: add transaction interface, 2025-09-16), existing
ODB transaction logic is adapted to create a transaction interface
at the ODB layer. The intent here is for the ODB transaction
interface to eventually provide an object source agnostic means to
manage transactions.
An unintended consequence of this change though is that
`object-file.c:index_fd()` may enter the ODB transaction path even
when no object write is requested. In non-repository contexts, this
can result in a NULL dereference and segfault. One such case occurs
when running git-diff(1) outside of a repository with
"core.bigFileThreshold" forcing the streaming path in `index_fd()`:
$ echo foo >foo
$ echo bar >bar
$ git -c core.bigFileThreshold=1 diff -- foo bar
In this scenario, the caller only needs to compute the object ID. Object
hashing does not require an ODB, so starting a transaction is both
unnecessary and invalid.
Fix the bug by avoiding the use of ODB transactions in `index_fd()` when
callers are only interested in computing the object hash.
Reported-by: Luca Stefani <luca.stefani.ge1@gmail.com> Signed-off-by: Justin Tobler <jltobler@gmail.com>
[jc: adjusted to fd13909e (Merge branch 'jt/odb-transaction', 2025-10-02)] Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check in "receive-pack" to prevent a checked out branch from
getting updated via updateInstead mechanism has been corrected.
* ps/receive-pack-updateinstead-in-worktree:
receive-pack: use worktree HEAD for updateInstead
t5516: clean up cloned and new-wt in denyCurrentBranch and worktrees test
t5516: test updateInstead with worktree and unborn bare HEAD
The way the "git log -L<range>:<file>" feature is bolted onto the
log/diff machinery is being reworked a bit to make the feature
compatible with more diff options, like -S/G.
* mm/line-log-use-standard-diff-output:
doc: note that -L supports patch formatting and pickaxe options
t4211: add tests for -L with standard diff options
line-log: route -L output through the standard diff pipeline
line-log: fix crash when combined with pickaxe options
Junio C Hamano [Tue, 7 Apr 2026 21:59:26 +0000 (14:59 -0700)]
Merge branch 'ps/fsck-wo-the-repository'
Internals of "git fsck" have been refactored to not depend on the
global `the_repository` variable.
* ps/fsck-wo-the-repository:
builtin/fsck: stop using `the_repository` in error reporting
builtin/fsck: stop using `the_repository` when marking objects
builtin/fsck: stop using `the_repository` when checking packed objects
builtin/fsck: stop using `the_repository` with loose objects
builtin/fsck: stop using `the_repository` when checking reflogs
builtin/fsck: stop using `the_repository` when checking refs
builtin/fsck: stop using `the_repository` when snapshotting refs
builtin/fsck: fix trivial dependence on `the_repository`
fsck: drop USE_THE_REPOSITORY
fsck: store repository in fsck options
fsck: initialize fsck options via a function
fetch-pack: move fsck options into function scope
Junio C Hamano [Tue, 7 Apr 2026 21:59:25 +0000 (14:59 -0700)]
Merge branch 'ps/commit-graph-overflow-fix'
Fix a regression in writing the commit-graph where commits with dates
exceeding 34 bits (beyond year 2514) could cause an underflow and
crash Git during the generation data overflow chunk writing.
Junio C Hamano [Mon, 6 Apr 2026 22:42:51 +0000 (15:42 -0700)]
Merge branch 'jk/c23-const-preserving-fixes'
Adjust the codebase for C23 that changes functions like strchr()
that discarded constness when they return a pointer into a const
string to preserve constness.
* jk/c23-const-preserving-fixes:
config: store allocated string in non-const pointer
rev-parse: avoid writing to const string for parent marks
revision: avoid writing to const string for parent marks
rev-parse: simplify dotdot parsing
revision: make handle_dotdot() interface less confusing
Junio C Hamano [Mon, 6 Apr 2026 22:42:50 +0000 (15:42 -0700)]
Merge branch 'aa/reap-transport-child-processes'
A few code paths that spawned child processes for network
connection weren't wait(2)ing for their children and letting "init"
reap them instead; they have been tightened.
* aa/reap-transport-child-processes:
transport-helper, connect: use clean_on_exit to reap children on abnormal exit
Junio C Hamano [Mon, 6 Apr 2026 22:42:49 +0000 (15:42 -0700)]
Merge branch 'tb/stdin-packs-excluded-but-open'
pack-objects's --stdin-packs=follow mode learns to handle
excluded-but-open packs.
* tb/stdin-packs-excluded-but-open:
repack: mark non-MIDX packs above the split as excluded-open
pack-objects: support excluded-open packs with --stdin-packs
t7704: demonstrate failure with once-cruft objects above the geometric split
pack-objects: refactor `read_packs_list_from_stdin()` to use `strmap`
pack-objects: plug leak in `read_stdin_packs()`
Object name handling (disambiguation and abbreviation) has been
refactored to be backend-generic, moving logic into the respective
object database backends.
* ps/odb-generic-object-name-handling:
odb: introduce generic `odb_find_abbrev_len()`
object-file: move logic to compute packed abbreviation length
object-name: move logic to compute loose abbreviation length
object-name: simplify computing common prefixes
object-name: abbreviate loose object names without `disambiguate_state`
object-name: merge `update_candidates()` and `match_prefix()`
object-name: backend-generic `get_short_oid()`
object-name: backend-generic `repo_collect_ambiguous()`
object-name: extract function to parse object ID prefixes
object-name: move logic to iterate through packed prefixed objects
object-name: move logic to iterate through loose prefixed objects
odb: introduce `struct odb_for_each_object_options`
oidtree: extend iteration to allow for arbitrary return codes
oidtree: modernize the code a bit
object-file: fix sparse 'plain integer as NULL pointer' error
projects / thirdparty / git.git / log
