Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
Since commit def3ae83da02f ("fs: store real path instead of fake path in
backing file f_path"), file_path() no longer returns the user file path
when applied to a backing file. There is an existing helper
file_user_path() for that situation.
Use file_user_path() instead of file_path() to get the path for MMAP
and MMAP2 events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps
... 55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
#
Fixes: def3ae83da02f ("fs: store real path instead of fake path in backing file f_path") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was reported that Intel PT address filters do not work in Docker
containers. That relates to the use of overlayfs.
overlayfs records the backing file in struct vm_area_struct vm_file,
instead of the user file that the user mmapped. In order for an address
filter to match, it must compare to the user file inode. There is an
existing helper file_user_inode() for that situation.
Use file_user_inode() instead of file_inode() to get the inode for address
filter matching.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps
... 55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
# perf buildid-cache --add /root/test/merged/cat
Before:
Address filter does not match so there are no control flow packets
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan Reported-by: Edd Barrett <edd@theunixzoo.co.uk> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org # 6.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GFX12 MES uses low 32 bits of status return for success (1 or 0)
and high bits for debug information if low bits are 0.
GFX11 MES doesn't do this so checking full 64-bit status return
for 1 or 0 is still valid.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The atomic variable vm_fault_info_updated is used to synchronize access to
adev->gmc.vm_fault_info between the interrupt handler and
get_vm_fault_info().
The default atomic functions like atomic_set() and atomic_read() do not
provide memory barriers. This allows for CPU instruction reordering,
meaning the memory accesses to vm_fault_info and the vm_fault_info_updated
flag are not guaranteed to occur in the intended order. This creates a
race condition that can lead to inconsistent or stale data being used.
The previous implementation, which used an explicit mb(), was incomplete
and inefficient. It failed to account for all potential CPU reorderings,
such as the access of vm_fault_info being reordered before the atomic_read
of the flag. This approach is also more verbose and less performant than
using the proper atomic functions with acquire/release semantics.
Fix this by switching to atomic_set_release() and atomic_read_acquire().
These functions provide the necessary acquire and release semantics,
which act as memory barriers to ensure the correct order of operations.
It is also more efficient and idiomatic than using explicit full memory
barriers.
Fixes: b97dfa27ef3a ("drm/amdgpu: save vm fault information for amdkfd") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/ Cc: Christian König <christian.koenig@amd.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Philipp Stanner <phasta@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 interfaces
device to test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel index type in gs_host_frame is u8,
just make canch[] become a flexible array with a u8 index, so it
naturally constraint by U8_MAX and avoid statically allocate 256
pointer for every gs_usb device.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com> Cc: stable@vger.kernel.org Reviewed-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Celeste Liu <uwu@coelacanthus.name> Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gs_usb driver supports USB devices with more than 1 CAN channel.
In old kernel before 3.15, it uses net_device->dev_id to distinguish
different channel in userspace, which was done in commit acff76fa45b4 ("can: gs_usb: gs_make_candev(): set netdev->dev_id").
But since 3.15, the correct way is populating net_device->dev_port.
And according to documentation, if network device support multiple
interface, lack of net_device->dev_port SHALL be treated as a bug.
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
Fixes: 5906333cc4af ("btrfs: zoned: don't skip block group profile checks on conventional zones") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The intent of btrfs_readahead_expand() was to expand to the length of
the current compressed extent being read. However, "ram_bytes" is *not*
that, in the case where a single physical compressed extent is used for
multiple file extents.
Consider this case with a large compressed extent C and then later two
non-compressed extents N1 and N2 written over C, leaving C1 and C2
pointing to offset/len pairs of C:
[ C ]
[ N1 ][ C1 ][ N2 ][ C2 ]
In such a case, ram_bytes for both C1 and C2 is the full uncompressed
length of C. So starting readahead in C1 will expand the readahead past
the end of C1, past N2, and into C2. This will then expand readahead
again, to C2_start + ram_bytes, way past EOF. First of all, this is
totally undesirable, we don't want to read the whole file in arbitrary
chunks of the large underlying extent if it happens to exist. Secondly,
it results in zeroing the range past the end of C2 up to ram_bytes. This
is particularly unpleasant with fs-verity as it can zero and set
uptodate pages in the verity virtual space past EOF. This incorrect
readahead behavior can lead to verity verification errors, if we iterate
in a way that happens to do the wrong readahead.
Fix this by using em->len for readahead expansion, not em->ram_bytes,
resulting in the expected behavior of stopping readahead at the extent
boundary.
Reported-by: Max Chernoff <git@maxchernoff.ca> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898 Fixes: 9e9ff875e417 ("btrfs: use readahead_expand() on compressed extents") CC: stable@vger.kernel.org # 6.17 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as
provided by the user, which is kfree'd in the end. But this was not the
case when allocating memory for 'prealloc'. In this case, if it somehow
failed, then the previous code would go directly into calling
'mnt_drop_write_file', without freeing the string duplicated from the
user space.
Fixes: 4addc1ffd67a ("btrfs: qgroup: preallocate memory before adding a relation") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When starting relocation, at reloc_chunk_start(), if we happen to find
the flag BTRFS_FS_RELOC_RUNNING is already set we return an error
(-EINPROGRESS) to the callers, however the callers call reloc_chunk_end()
which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since
relocation was started by another task and still running.
Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected
scenario, but still our current behaviour is not correct.
Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has
returned an error, which is what logically makes sense, since the general
widespread pattern is to have end functions called only if the counterpart
start functions succeeded. This requires changing reloc_chunk_start() to
clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request.
Fixes: 907d2710d727 ("btrfs: add cancellable chunk relocation support") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode.
When freeing metadata blocks in nojournal mode, ext4_forget() calls
bforget() to clear the dirty flag on the buffer_head and remvoe
associated mappings. This is acceptable if the metadata has not yet
begun to be written back. However, if the write-back has already started
but is not yet completed, ext4_forget() will have no effect.
Subsequently, ext4_mb_clear_bb() will immediately return the block to
the mb allocator. This block can then be reallocated immediately,
potentially causing an data corruption issue.
Fix this by clearing the buffer's dirty flag and waiting for the ongoing
I/O to complete, ensuring that no further writes to stale data will
occur.
When releasing file system metadata blocks in jbd2_journal_forget(), if
this buffer has not yet been checkpointed, it may have already been
written back, currently be in the process of being written back, or has
not yet written back. jbd2_journal_forget() calls
jbd2_journal_try_remove_checkpoint() to check the buffer's status and
add it to the current transaction if it has not been written back. This
buffer can only be reallocated after the transaction is committed.
jbd2_journal_try_remove_checkpoint() attempts to lock the buffer and
check its dirty status while holding the buffer lock. If the buffer has
already been written back, everything proceeds normally. However, there
are two issues. First, the function returns immediately if the buffer is
locked by the write-back process. It does not wait for the write-back to
complete. Consequently, until the current transaction is committed and
the block is reallocated, there is no guarantee that the I/O will
complete. This means that ongoing I/O could write stale metadata to the
newly allocated block, potentially corrupting data. Second, the function
unlocks the buffer as soon as it detects that the buffer is still dirty.
If a concurrent write-back occurs immediately after this unlocking and
before clear_buffer_dirty() is called in jbd2_journal_forget(), data
corruption can theoretically still occur.
Although these two issues are unlikely to occur in practice since the
undergoing metadata writeback I/O does not take this long to complete,
it's better to explicitly ensure that all ongoing I/O operations are
completed.
Fixes: 597599268e3b ("jbd2: discard dirty data when forgetting an un-journalled buffer") Cc: stable@kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250916093337.3161016-2-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this example, we should give the relative map of the target block device
ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by
0x37ebfff + 1 - 0x37ebfa9.
In the below equation, however, map->m_pblk was supposed to be the original
address instead of the one from the target block address.
If obj_exts allocation failed, slab->obj_exts is set to OBJEXTS_ALLOC_FAIL,
But we do not clear it when freeing the slab. Since OBJEXTS_ALLOC_FAIL and
MEMCG_DATA_OBJEXTS currently share the same bit position, during the
release of the associated folio, a VM_BUG_ON_FOLIO() check in
folio_memcg_kmem() is triggered because the OBJEXTS_ALLOC_FAIL flag was
not cleared, causing it to be interpreted as a kmem folio (non-slab)
with MEMCG_OBJEXTS_DATA flag set, which is invalid because
MEMCG_OBJEXTS_DATA is supposed to be set only on slabs.
Another problem that predates sharing the OBJEXTS_ALLOC_FAIL and
MEMCG_DATA_OBJEXTS bits is that on configurations with
is_check_pages_enabled(), the non-cleared bit in page->memcg_data will
trigger a free_page_is_bad() failure "page still charged to cgroup"
When freeing a slab, we clear slab->obj_exts if the obj_ext array has
been successfully allocated. So let's clear it also when the allocation
has failed.
Fixes: 09c46563ff6d ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations") Fixes: 7612833192d5 ("slab: Reuse first bit for OBJEXTS_ALLOC_FAIL") Link: https://lore.kernel.org/all/20251015141642.700170-1-hao.ge@linux.dev/ Cc: <stable@vger.kernel.org> Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
Fixes: 8ceb98437946 ("CIFS: Move rename to ops struct") Fixes: 2f1afe25997f ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions") Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") Cc: stable@vger.kernel.org Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel uses the standard rustc targets for non-x86 targets, and out
of those only 64-bit arm's target has kcfi support enabled. For x86, the
custom 64-bit target enables kcfi.
The HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC config option that allows
CFI_CLANG to be used in combination with RUST does not check whether the
rustc target supports kcfi. This breaks the build on riscv (and
presumably 32-bit arm) when CFI_CLANG and RUST are enabled at the same
time.
Ordinarily, a rustc-option check would be used to detect target support
but unfortunately rustc-option filters out the target for reasons given
in commit 46e24a545cdb4 ("rust: kasan/kbuild: fix missing flags on first
build"). As a result, if the host supports kcfi but the target does not,
e.g. when building for riscv on x86_64, the build would remain broken.
Instead, make HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC depend on the only
two architectures where the target used supports it to fix the build.
CC: stable@vger.kernel.org Fixes: ca627e636551e ("rust: cfi: add support for CFI_CLANG with Rust") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250908-distill-lint-1ae78bcf777c@spud Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In normal operation, a registered exec queue is disabled and
deregistered through the GuC, and freed only after the GuC confirms
completion. However, if the driver is forced to unbind while the exec
queue is still running, the user may call exec_destroy() after the GuC
has already been stopped and CT communication disabled.
In this case, the driver cannot receive a response from the GuC,
preventing proper cleanup of exec queue resources. Fix this by directly
releasing the resources when GuC is not running.
Here is the failure dmesg log:
"
[ 468.089581] ---[ end trace 0000000000000000 ]---
[ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535)
[ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535
[ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1
[ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1)
[ 468.092716] ------------[ cut here ]------------
[ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe]
"
v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled().
As CT may go down and come back during VF migration.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251010172529.2967639-2-shuicheng.lin@intel.com
(cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A while back I had reported that an NFSv3 client could successfully
mount using '-o xprtsec=none' an export that had been exported with
'xprtsec=tls:mtls'. By "successfully" I mean that the mount command
would succeed and the mount would show up in /proc/mount. Attempting
to do anything futher with the mount would be met with NFS3ERR_ACCES.
This was fixed (albeit accidentally) by commit bb4f07f2409c ("nfsd:
Fix NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT") and was
subsequently re-broken by commit 0813c5f01249 ("nfsd: fix access
checking for NLM under XPRTSEC policies").
Transport Layer Security isn't an RPC security flavor or pseudo-flavor,
so we shouldn't be conflating them when determining whether the access
checks can be bypassed. Split check_nfsd_access() into two helpers, and
have __fh_verify() call the helpers directly since __fh_verify() has
logic that allows one or both of the checks to be skipped. All other
sites will continue to call check_nfsd_access().
Link: https://lore.kernel.org/linux-nfs/ZjO3Qwf_G87yNXb2@aion/ Fixes: 9280c5774314 ("NFSD: Handle new xprtsec= export option") Cc: stable@vger.kernel.org Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assumption that chain DMA module starts the link DMA when 1ms of
data is available from host is not correct. Instead the firmware
chain DMA module fills the link DMA with initial buffer of zeroes
and the host and link DMAs are started at the same time.
This results in a small error in delay calculation. This can become a
more severe problem if host DMA has delays that exceed 1ms. This results
in negative delay to be calculated and bogus values reported to
applications. This can confuse some applications like
alsa_conformance_test.
Fix the issue by correctly calculating the firmware chain DMA
preamble size and initializing the start offset to this value.
Cc: stable@vger.kernel.org Fixes: a1d203d390e0 ("ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20251002074719.2084-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an export policy with xprtsec policy is set with "tls"
and/or "mtls", but an NFS client is doing a v3 xprtsec=tls
mount, then NLM locking calls fail with an error because
there is currently no support for NLM with TLS.
Until such support is added, allow NLM calls under TLS-secured
policy.
Fixes: 4cc9b9f2bf4d ("nfsd: refine and rename NFSD_MAY_LOCK") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Reviewed-by: NeilBrown <neil@brown.name> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__fh_verify() added a call to svc_xprt_set_valid() to help do connection
management but during LOCALIO path rqstp argument is NULL, leading to
NULL pointer dereferencing and a crash.
Fixes: eccbbc7c00a5 ("nfsd: don't use sv_nrthreads in connection limiting calculations.") Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cycles event will fallback to task-clock in the hybrid test when
running virtualized. Change the test to not fail for this.
Fixes: 65d11821910bd910 ("perf test: Add a test for default perf stat command") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241212173354.9860-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K Prateek Nayak [Wed, 15 Oct 2025 06:03:59 +0000 (06:03 +0000)]
sched/fair: Block delayed tasks on throttled hierarchy during dequeue
Dequeuing a fair task on a throttled hierarchy returns early on
encountering a throttled cfs_rq since the throttle path has already
dequeued the hierarchy above and has adjusted the h_nr_* accounting till
the root cfs_rq.
dequeue_entities() crucially misses calling __block_task() for delayed
tasks being dequeued on the throttled hierarchies, but this was mostly
harmless until commit b7ca5743a260 ("sched/core: Tweak
wait_task_inactive() to force dequeue sched_delayed tasks") since all
existing cases would re-enqueue the task if task_on_rq_queued() returned
true and the task would eventually be blocked at pick after the
hierarchy was unthrottled.
wait_task_inactive() is special as it expects the delayed task on
throttled hierarchy to reach the blocked state on dequeue but since
__block_task() is never called, task_on_rq_queued() continues to return
true. Furthermore, since the task is now off the hierarchy, the pick
never reaches it to fully block the task even after unthrottle leading
to wait_task_inactive() looping endlessly.
Remedy this by calling __block_task() if a delayed task is being
dequeued on a throttled hierarchy.
This fix is only required for stabled kernels implementing delay dequeue
(>= v6.12) before v6.18 since upstream commit e1fad12dcb66 ("sched/fair:
Switch to task based throttle model") indirectly fixes this by removing
the early return conditions in dequeue_entities() as part of the per-task
throttle feature.
Cc: stable@vger.kernel.org Reported-by: Matt Fleming <matt@readmodwrite.com> Closes: https://lore.kernel.org/all/20250925133310.1843863-1-matt@readmodwrite.com/ Fixes: b7ca5743a260 ("sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks") Tested-by: Matt Fleming <mfleming@cloudflare.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With lazytime mount option enabled we can be switching many dirty inodes
on cgroup exit to the parent cgroup. The numbers observed in practice
when systemd slice of a large cron job exits can easily reach hundreds
of thousands or millions. The logic in inode_do_switch_wbs() which sorts
the inode into appropriate place in b_dirty list of the target wb
however has linear complexity in the number of dirty inodes thus overall
time complexity of switching all the inodes is quadratic leading to
workers being pegged for hours consuming 100% of the CPU and switching
inodes to the parent wb.
Simple reproducer of the issue:
FILES=10000
# Filesystem mounted with lazytime mount option
MNT=/mnt/
echo "Creating files and switching timestamps"
for (( j = 0; j < 50; j ++ )); do
mkdir $MNT/dir$j
for (( i = 0; i < $FILES; i++ )); do
echo "foo" >$MNT/dir$j/file$i
done
touch -a -t 202501010000 $MNT/dir$j/file*
done
wait
echo "Syncing and flushing"
sync
echo 3 >/proc/sys/vm/drop_caches
echo "Reading all files from a cgroup"
mkdir /sys/fs/cgroup/unified/mycg1 || exit
echo $$ >/sys/fs/cgroup/unified/mycg1/cgroup.procs || exit
for (( j = 0; j < 50; j ++ )); do
cat /mnt/dir$j/file* >/dev/null &
done
wait
echo "Switching wbs"
# Now rmdir the cgroup after the script exits
We need to maintain b_dirty list ordering to keep writeback happy so
instead of sorting inode into appropriate place just append it at the
end of the list and clobber dirtied_time_when. This may result in inode
writeback starting later after cgroup switch however cgroup switches are
rare so it shouldn't matter much. Since the cgroup had write access to
the inode, there are no practical concerns of the possible DoS issues.
Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
process_inode_switch_wbs_work() can be switching over 100 inodes to a
different cgroup. Since switching an inode requires counting all dirty &
under-writeback pages in the address space of each inode, this can take
a significant amount of time. Add a possibility to reschedule after
processing each inode to avoid softlockups.
Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When CONFIG_TMPFS is enabled, the initial root filesystem is a tmpfs.
By default, a tmpfs mount is limited to using 50% of the available RAM
for its content. This can be problematic in memory-constrained
environments, particularly during a kdump capture.
In a kdump scenario, the capture kernel boots with a limited amount of
memory specified by the 'crashkernel' parameter. If the initramfs is
large, it may fail to unpack into the tmpfs rootfs due to insufficient
space. This is because to get X MB of usable space in tmpfs, 2*X MB of
memory must be available for the mount. This leads to an OOM failure
during the early boot process, preventing a successful crash dump.
This patch introduces a new kernel command-line parameter,
initramfs_options, which allows passing specific mount options directly
to the rootfs when it is first mounted. This gives users control over
the rootfs behavior.
For example, a user can now specify initramfs_options=size=75% to allow
the tmpfs to use up to 75% of the available memory. This can
significantly reduce the memory pressure for kdump.
Consider a practical example:
To unpack a 48MB initramfs, the tmpfs needs 48MB of usable space. With
the default 50% limit, this requires a memory pool of 96MB to be
available for the tmpfs mount. The total memory requirement is therefore
approximately: 16MB (vmlinuz) + 48MB (loaded initramfs) + 48MB (unpacked
kernel) + 96MB (for tmpfs) + 12MB (runtime overhead) ≈ 220MB.
By using initramfs_options=size=75%, the memory pool required for the
48MB tmpfs is reduced to 48MB / 0.75 = 64MB. This reduces the total
memory requirement by 32MB (96MB - 64MB), allowing the kdump to succeed
with a smaller crashkernel size, such as 192MB.
An alternative approach of reusing the existing rootflags parameter was
considered. However, a new, dedicated initramfs_options parameter was
chosen to avoid altering the current behavior of rootflags (which
applies to the final root filesystem) and to prevent any potential
regressions.
Also add documentation for the new kernel parameter "initramfs_options"
This approach is inspired by prior discussions and patches on the topic.
Ref: https://www.lightofdawn.org/blog/?viewDetailed=00128
Ref: https://landley.net/notes-2015.html#01-01-2015
Ref: https://lkml.org/lkml/2021/6/29/783
Ref: https://www.kernel.org/doc/html/latest/filesystems/ramfs-rootfs-initramfs.html#what-is-rootfs
If the process runs in 32-bit compat mode, copy_file_range results can be
in the in-band error range. In this case limit copy length to MAX_RW_COUNT
to prevent a signed overflow.
According to the PLIC specification[1], global interrupt sources are
assigned small unsigned integer identifiers beginning at the value 1.
An interrupt ID of 0 is reserved to mean "no interrupt".
The current plic_irq_resume() and plic_irq_suspend() functions incorrectly
start the loop from index 0, which accesses the register space for the
reserved interrupt ID 0.
Change the loop to start from index 1, skipping the reserved
interrupt ID 0 as per the PLIC specification.
This prevents potential undefined behavior when accessing the reserved
register space during suspend/resume cycles.
Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation") Co-developed-by: Jia Wang <wangjia@ultrarisc.com> Signed-off-by: Jia Wang <wangjia@ultrarisc.com> Co-developed-by: Charles Mirabile <cmirabil@redhat.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> Signed-off-by: Lucas Zampieri <lzampier@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://github.com/riscv/riscv-plic-spec/releases/tag/1.0.0 Signed-off-by: Sasha Levin <sashal@kernel.org>
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Currently the caller-allocated portion of the stack frame is described
using constants, hardcoded values, and an ASCII drawing, making it
harder than necessary to ensure that everything is in sync.
Declare a struct and use offsetof() and offsetofend() macros to refer
to various values stored within the frame.
When splitting an mTHP and replacing a zero-filled subpage with the shared
zeropage, try_to_map_unused_to_zeropage() currently drops several
important PTE bits.
For userspace tools like CRIU, which rely on the soft-dirty mechanism for
incremental snapshots, losing the soft-dirty bit means modified pages are
missed, leading to inconsistent memory state after restore.
As pointed out by David, the more critical uffd-wp bit is also dropped.
This breaks the userfaultfd write-protection mechanism, causing writes to
be silently missed by monitoring applications, which can lead to data
corruption.
Preserve both the soft-dirty and uffd-wp bits from the old PTE when
creating the new zeropage mapping to ensure they are correctly tracked.
Link: https://lkml.kernel.org/r/20250930081040.80926-1-lance.yang@linux.dev Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp") Signed-off-by: Lance Yang <lance.yang@linux.dev> Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Dev Jain <dev.jain@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Jann Horn <jannh@google.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Rik van Riel <riel@surriel.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to commit b52da4054ee0 ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
This patch required quite a bit of work to backport due to a number
of unrelated changes that do not make sense to backport. This has
been run against my test suite and passes all tests.
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/ Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Corey Minyard <corey@minyard.net> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536 Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm.c, because commit 498d7d8b75f1 ("mptcp: pm: remove
'_nl' from mptcp_pm_nl_is_init_remote_addr") renamed an helper in the
context, and it is not in this version. The same new code can be
applied at the same place.
Conflict in pm_kernel.c, because the modified code has been moved from
pm_netlink.c to pm_kernel.c in commit 8617e85e04bd ("mptcp: pm: split
in-kernel PM specific code"), which is not in this version. The
resolution is easy: simply by applying the patch where 'pm_kernel.c'
has been replaced 'pm_netlink.c'. 'patch --merge' managed to apply
this modified patch without creating any conflicts. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In certain circumstances, the ACPI handle of a data-only node may be
NULL, in which case it does not make sense to attempt to attach that
node to an ACPI namespace object, so update the code to avoid attempts
to do so.
This prevents confusing and unuseful error messages from being printed.
Also document the fact that the ACPI handle of a data-only node may be
NULL and when that happens in a code comment. In addition, make
acpi_add_nondev_subnodes() print a diagnostic message for each data-only
node with an unknown ACPI namespace scope.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles") Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some places in the ACPI device properties handling code, it is
unclear why the code is what it is. Some assumptions are not documented
and some pieces of code are based on knowledge that is not mentioned
anywhere.
Add code comments explaining these things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data-only subnode links following the ACPI data subnode GUID in a _DSD
package are expected to point to named objects returning _DSD-equivalent
packages. If a reference to such an object is used in the target field
of any of those links, that object will be evaluated in place (as a
named object) and its return data will be embedded in the outer _DSD
package.
For this reason, it is not expected to see a subnode link with the
target field containing a local reference (that would mean pointing
to a device or another object that cannot be evaluated in place and
therefore cannot return a _DSD-equivalent package).
Accordingly, simplify the code parsing data-only subnode links to
simply print a message when it encounters a local reference in the
target field of one of those links.
Moreover, since acpi_nondev_subnode_data_ok() would only have one
caller after the change above, fold it into that caller.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jVeSrDO6hrZhKgRZrH=FpGD4vNUjFD8hV9WwN9TLHjzQ@mail.gmail.com/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no synchronization between different code paths in the ACPI
battery driver that update its sysfs interface or its power supply
class device interface. In some cases this results to functional
failures due to race conditions.
One example of this is when two ACPI notifications:
are triggered (by the platform firmware) in a row with a little delay
in between after removing and reinserting a laptop battery. Both
notifications cause acpi_battery_update() to be called and if the delay
between them is sufficiently small, sysfs_add_battery() can be re-entered
before battery->bat is set which leads to a duplicate sysfs entry error:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT1'
CPU: 1 UID: 0 PID: 185 Comm: kworker/1:4 Kdump: loaded Not tainted 6.12.38+deb13-amd64 #1 Debian 6.12.38-1
Hardware name: Gateway NV44 /SJV40-MV , BIOS V1.3121 04/08/2009
Workqueue: kacpi_notify acpi_os_execute_deferred
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_create_dir_ns+0xce/0xe0
kobject_add_internal+0xba/0x250
kobject_add+0x96/0xc0
? get_device_parent+0xde/0x1e0
device_add+0xe2/0x870
__power_supply_register.part.0+0x20f/0x3f0
? wake_up_q+0x4e/0x90
sysfs_add_battery+0xa4/0x1d0 [battery]
acpi_battery_update+0x19e/0x290 [battery]
acpi_battery_notify+0x50/0x120 [battery]
acpi_ev_notify_dispatch+0x49/0x70
acpi_os_execute_deferred+0x1a/0x30
process_one_work+0x177/0x330
worker_thread+0x251/0x390
? __pfx_worker_thread+0x10/0x10
kthread+0xd2/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for BAT1 with -EEXIST, don't try to register things with the same name in the same directory.
There are also other scenarios in which analogous issues may occur.
Address this by using a common lock in all of the code paths leading
to updates of driver interfaces: ACPI Notify () handler, system resume
callback and post-resume notification, device addition and removal.
This new lock replaces sysfs_lock that has been used only in
sysfs_remove_battery() which now is going to be always called under
the new lock, so it doesn't need any internal locking any more.
Fixes: 10666251554c ("ACPI: battery: Install Notify() handler directly") Closes: https://lore.kernel.org/linux-acpi/20250910142653.313360-1-luogf2025@163.com/ Reported-by: GuangFei Luo <luogf2025@163.com> Tested-by: GuangFei Luo <luogf2025@163.com> Cc: 6.6+ <stable@vger.kernel.org> # 6.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 0710c1ce5045 ("ACPI: battery: initialize mutexes through devm_ APIs") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20241030162754.2110946-1-andriy.shevchenko@linux.intel.com
[ rjw: Added 2 empty code lines ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 399dbcadc01e ("ACPI: battery: Add synchronization between interface updates") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a listener is added, a part of creation of transport also registers
program/port with rpcbind. However, when the listener is removed,
while transport goes away, rpcbind still has the entry for that
port/type.
When deleting the transport, unregister with rpcbind when appropriate.
---v2 created a new xpt_flag XPT_RPCB_UNREG to mark TCP and UDP
transport and at xprt destroy send rpcbind unregister if flag set.
Suggested-by: Chuck Lever <chuck.lever@oracle.com> Fixes: d093c9089260 ("nfsd: fix management of listener transports") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The heuristic for limiting the number of incoming connections to nfsd
currently uses sv_nrthreads - allowing more connections if more threads
were configured.
A future patch will allow number of threads to grow dynamically so that
there will be no need to configure sv_nrthreads. So we need a different
solution for limiting connections.
It isn't clear what problem is solved by limiting connections (as
mentioned in a code comment) but the most likely problem is a connection
storm - many connections that are not doing productive work. These will
be closed after about 6 minutes already but it might help to slow down a
storm.
This patch adds a per-connection flag XPT_PEER_VALID which indicates
that the peer has presented a filehandle for which it has some sort of
access. i.e the peer is known to be trusted in some way. We now only
count connections which have NOT been determined to be valid. There
should be relative few of these at any given time.
If the number of non-validated peer exceed a limit - currently 64 - we
close the oldest non-validated peer to avoid having too many of these
useless connections.
Note that this patch significantly changes the meaning of the various
configuration parameters for "max connections". The next patch will
remove all of these.
Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFSD_MAY_LOCK means a few different things.
- it means that GSS is not required.
- it means that with NFSEXP_NOAUTHNLM, authentication is not required
- it means that OWNER_OVERRIDE is allowed.
None of these are specific to locking, they are specific to the NLM
protocol.
So:
- rename to NFSD_MAY_NLM
- set NFSD_MAY_OWNER_OVERRIDE and NFSD_MAY_BYPASS_GSS in nlm_fopen()
so that NFSD_MAY_NLM doesn't need to imply these.
- move the test on NFSEXP_NOAUTHNLM out of nfsd_permission() and
into fh_verify where other special-case tests on the MAY flags
happen. nfsd_permission() can be called from other places than
fh_verify(), but none of these will have NFSD_MAY_NLM.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFSv4 LOCK operations should not avoid the set of authorization
checks that apply to all other NFSv4 operations. Also, the
"no_auth_nlm" export option should apply only to NLM LOCK requests.
It's not necessary or sensible to apply it to NFSv4 LOCK operations.
Instead, set no permission bits when calling fh_verify(). Subsequent
stateid processing handles authorization checks.
Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT do not bypass
only GSS, but bypass any method. This is a problem specially for NFS3
AUTH_NULL-only exports.
The purpose of NFSD_MAY_BYPASS_GSS_ON_ROOT is described in RFC 2623,
section 2.3.2, to allow mounting NFS2/3 GSS-only export without
authentication. So few procedures which do not expose security risk used
during mount time can be called also with AUTH_NONE or AUTH_SYS, to allow
client mount operation to finish successfully.
The problem with current implementation is that for AUTH_NULL-only exports,
the NFSD_MAY_BYPASS_GSS_ON_ROOT is active also for NFS3 AUTH_UNIX mount
attempts which confuse NFS3 clients, and make them think that AUTH_UNIX is
enabled and is working. Linux NFS3 client never switches from AUTH_UNIX to
AUTH_NONE on active mount, which makes the mount inaccessible.
Fix the NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT implementation
and really allow to bypass only exports which have enabled some real
authentication (GSS, TLS, or any other).
The result would be: For AUTH_NULL-only export if client attempts to do
mount with AUTH_UNIX flavor then it will receive access errors, which
instruct client that AUTH_UNIX flavor is not usable and will either try
other auth flavor (AUTH_NULL if enabled) or fails mount procedure.
Similarly if client attempt to do mount with AUTH_NULL flavor and only
AUTH_UNIX flavor is enabled then the client will receive access error.
This should fix problems with AUTH_NULL-only or AUTH_UNIX-only exports if
client attempts to mount it with other auth flavor (e.g. with AUTH_NULL for
AUTH_UNIX-only export, or with AUTH_UNIX for AUTH_NULL-only export).
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
The above traces are from a Google-VMM based VM, but the same behavior
happens with a QEMU based VM that is modified to add a SystemMemory range
for the TPM TIS address space.
The only reason this doesn't cause problems for HPET, which appears to
require a SystemMemory region, is because HPET gets special treatment via
x86_init.timers.timer_init(), and so gets a chance to create its UC-
mapping before acpi_init() clobbers things. Disabling the early call to
hpet_time_init() yields the same behavior for HPET:
[ 0.318264] ioremap error for 0xfed00000-0xfed01000, requested 0x2, got 0x0
Hack around the ACPI gap by forcing the legacy PCI hole to UC when
overriding the (virtual) MTRRs for CoCo guest, so that ioremap handling
of MTRRs naturally kicks in and forces the ACPI mappings to be UC.
Note, the requested/mapped memtype doesn't actually matter in terms of
accessing the device. In practically every setup, legacy PCI devices are
emulated by the hypervisor, and accesses are intercepted and handled as
emulated MMIO, i.e. never access physical memory and thus don't have an
effective memtype.
Even in a theoretical setup where such devices are passed through by the
host, i.e. point at real MMIO memory, it is KVM's (as the hypervisor)
responsibility to force the memory to be WC/UC, e.g. via EPT memtype
under TDX or real hardware MTRRs under SNP. Not doing so cannot work,
and the hypervisor is highly motivated to do the right thing as letting
the guest access hardware MMIO with WB would likely result in a variety
of fatal #MCs.
In other words, forcing the range to be UC is all about coercing the
kernel's tracking into thinking that it has established UC mappings, so
that the ioremap code doesn't reject mappings from e.g. the TPM driver and
thus prevent the driver from loading and the device from functioning.
Note #2, relying on guest firmware to handle this scenario, e.g. by setting
virtual MTRRs and then consuming them in Linux, is not a viable option, as
the virtual MTRR state is managed by the untrusted hypervisor, and because
OVMF at least has stopped programming virtual MTRRs when running as a TDX
guest.
Link: https://lore.kernel.org/all/8137d98e-8825-415b-9282-1d2a115bb51a@linux.intel.com Fixes: 8e690b817e38 ("x86/kvm: Override default caching mode for SEV-SNP and TDX") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Jürgen Groß <jgross@suse.com> Cc: Korakit Seemakhupt <korakit@google.com> Cc: Jianxiong Gao <jxgao@google.com> Cc: Nikolay Borisov <nik.borisov@suse.com> Suggested-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Korakit Seemakhupt <korakit@google.com> Link: https://lore.kernel.org/r/20250828005249.39339-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit d77e59a8fccd "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page") Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com> Cc: stable@vger.kernel.org # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lance Yang <lance.yang@linux.dev> Acked-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Lance Yang <lance.yang@linux.dev> Signed-off-by: Will Deacon <will@kernel.org>
[ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a755d0e2d41b ("cpufreq: Honour transition_latency over
transition_delay_us") caused platforms where cpuinfo.transition_latency
is CPUFREQ_ETERNAL to get a very large transition latency whereas
previously it had been capped at 10 ms (and later at 2 ms).
This led to a user-observable regression between 6.6 and 6.12 as
described by Shawn:
"The dbs sampling_rate was 10000 us on 6.6 and suddently becomes 6442450 us (4294967295 / 1000 * 1.5) on 6.12 for these platforms
because the default transition delay was dropped [...].
It slows down dbs governor's reacting to CPU loading change
dramatically. Also, as transition_delay_us is used by schedutil
governor as rate_limit_us, it shows a negative impact on device
idle power consumption, because the device gets slightly less time
in the lowest OPP."
Evidently, the expectation of the drivers using CPUFREQ_ETERNAL as
cpuinfo.transition_latency was that it would be capped by the core,
but they may as well return a default transition latency value instead
of CPUFREQ_ETERNAL and the core need not do anything with it.
Accordingly, introduce CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS and make
all of the drivers in question use it instead of CPUFREQ_ETERNAL. Also
update the related Rust binding.
Fixes: a755d0e2d41b ("cpufreq: Honour transition_latency over transition_delay_us") Closes: https://lore.kernel.org/linux-pm/20250922125929.453444-1-shawnguo2@yeah.net/ Reported-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 6.6+ <stable@vger.kernel.org> # 6.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2264949.irdbgypaU6@rafael.j.wysocki
[ rjw: Fix typo in new symbol name, drop redundant type cast from Rust binding ] Tested-by: Shawn Guo <shawnguo@kernel.org> # with cpufreq-dt driver Reviewed-by: Qais Yousef <qyousef@layalina.io> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ omitted Rust changes ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
With my local branch to enable bs > ps support for btrfs, sometimes I
hit the following ASSERT() inside submit_one_sector():
ASSERT(block_start != EXTENT_MAP_HOLE);
Please note that it's not yet possible to hit this ASSERT() in the wild
yet, as it requires btrfs bs > ps support, which is not even in the
development branch.
But on the other hand, there is also a very low chance to hit above
ASSERT() with bs < ps cases, so this is an existing bug affect not only
the incoming bs > ps support but also the existing bs < ps support.
[CAUSE]
Firstly that ASSERT() means we're trying to submit a dirty block but
without a real extent map nor ordered extent map backing it.
Furthermore with extra debugging, the folio triggering such ASSERT() is
always larger than the fs block size in my bs > ps case.
(8K block size, 4K page size)
After some more debugging, the ASSERT() is trigger by the following
sequence:
extent_writepage()
| We got a 32K folio (4 fs blocks) at file offset 0, and the fs block
| size is 8K, page size is 4K.
| And there is another 8K folio at file offset 32K, which is also
| dirty.
| So the filemap layout looks like the following:
|
| "||" is the filio boundary in the filemap.
| "//| is the dirty range.
|
| 0 8K 16K 24K 32K 40K
| |////////| |//////////////////////||////////|
|
|- writepage_delalloc()
| |- find_lock_delalloc_range() for [0, 8K)
| | Now range [0, 8K) is properly locked.
| |
| |- find_lock_delalloc_range() for [16K, 40K)
| | |- btrfs_find_delalloc_range() returned range [16K, 40K)
| | |- lock_delalloc_folios() locked folio 0 successfully
| | |
| | | The filemap range [32K, 40K) got dropped from filemap.
| | |
| | |- lock_delalloc_folios() failed with -EAGAIN on folio 32K
| | | As the folio at 32K is dropped.
| | |
| | |- loops = 1;
| | |- max_bytes = PAGE_SIZE;
| | |- goto again;
| | | This will re-do the lookup for dirty delalloc ranges.
| | |
| | |- btrfs_find_delalloc_range() called with @max_bytes == 4K
| | | This is smaller than block size, so
| | | btrfs_find_delalloc_range() is unable to return any range.
| | \- return false;
| |
| \- Now only range [0, 8K) has an OE for it, but for dirty range
| [16K, 32K) it's dirty without an OE.
| This breaks the assumption that writepage_delalloc() will find
| and lock all dirty ranges inside the folio.
|
|- extent_writepage_io()
|- submit_one_sector() for [0, 8K)
| Succeeded
|
|- submit_one_sector() for [16K, 24K)
Triggering the ASSERT(), as there is no OE, and the original
extent map is a hole.
Please note that, this also exposed the same problem for bs < ps
support. E.g. with 64K page size and 4K block size.
If we failed to lock a folio, and falls back into the "loops = 1;"
branch, we will re-do the search using 64K as max_bytes.
Which may fail again to lock the next folio, and exit early without
handling all dirty blocks inside the folio.
[FIX]
Instead of using the fixed size PAGE_SIZE as @max_bytes, use
@sectorsize, so that we are ensured to find and lock any remaining
blocks inside the folio.
And since we're here, add an extra ASSERT() to
before calling btrfs_find_delalloc_range() to make sure the @max_bytes is
at least no smaller than a block to avoid false negative.
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the sampling rates going in (host) and out (dai) from the DSP
are different, the IPC4 delay reporting does not work correctly.
Add support for this case by scaling the all raw position values to
a common timebase before calculating real-time delay for the PCM.
Cc: stable@vger.kernel.org Fixes: 0ea06680dfcb ("ASoC: SOF: ipc4-pcm: Correct the delay calculation") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20251002074719.2084-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All streams (currently) which is configured to use ChainDMA can only work
on Link/host DMA pairs where the link side position can be access via host
registers (like HDA on CAVS 2.5 platforms).
Since the firmware does not provide time_info for ChainDMA, unlike for HDA
stream, the kernel should calculate the start and end offsets that is
needed for the delay calculation.
With this small change we can report accurate delays when the stream is
configured to use ChainDMA.
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88ef ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: 85afa9ea122d ("PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com Fixes: 7609385337a4 ("ksm: count ksm merging pages for each process") Fixes: cb4df4cae4f2 ("ksm: count allocated ksm rmap_items for each process") Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Donet Tom <donettom@linux.ibm.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ replaced mm_flags_test() calls with test_bit() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read and write memory barriers to guarantee that if CPU1
sees that kprobe functionality is enabled, it must also see that
perf_events has been assigned.
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
The device minor should not be cleared after the device is released.
Fixes: 9e14868dc952 ("media: mc: Clear minor number reservation at unregistration time") Cc: stable@vger.kernel.org Reported-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=031d0cfd7c362817963f Tested-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ moved clear_bit from media_devnode_release callback to media_devnode_unregister before put_device ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: https://github.com/acpica/acpica/commit/463cb0fe Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During xattr block validation, check_xattrs() processes xattr entries
without validating that entries claiming to use EA inodes have non-zero
sizes. Corrupted filesystems may contain xattr entries where e_value_size
is zero but e_value_inum is non-zero, indicating invalid xattr data.
Add validation in check_xattrs() to detect this corruption pattern early
and return -EFSCORRUPTED, preventing invalid xattr entries from causing
issues throughout the ext4 codebase.
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org Fixes: a40759fb16ae ("ext4: remove array of buffer_heads from mext_page_mkuptodate()") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring.
Cc: stable@vger.kernel.org Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0@mit.edu> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit 8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()") Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When v3 NLM request finds a conflicting delegation, it triggers
a delegation recall and nfsd_open fails with EAGAIN. nfsd_open
then translates EAGAIN into nfserr_jukebox. In nlm_fopen, instead
of returning nlm_failed for when there is a conflicting delegation,
drop this NLM request so that the client retries. Once delegation
is recalled and if a local lock is claimed, a retry would lead to
nfsd returning a nlm_lck_blocked error or a successful nlm lock.
Fixes: d343fce148a4 ("[PATCH] knfsd: Allow lockd to drop replies as appropriate") Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5304877936c0 ("NFSD: Fix strncpy() fortify warning") replaced
strncpy(,, sizeof(..)) with strlcpy(,, sizeof(..) - 1), but strlcpy()
already guaranteed NUL-termination of the destination buffer and
subtracting one byte potentially truncated the source string.
The incorrect size was then carried over in commit 72f78ae00a8e ("NFSD:
move from strlcpy with unused retval to strscpy") when switching from
strlcpy() to strscpy().
Fix this off-by-one error by using the full size of the destination
buffer again.
damon_lru_sort_apply_parameters() allocates a new DAMON context, stages
user-specified DAMON parameters on it, and commits to running DAMON
context at once, using damon_commit_ctx(). The code is, however, directly
updating the monitoring attributes of the running context. And the
attributes are over-written by later damon_commit_ctx() call. This means
that the monitoring attributes parameters are not really working. Fix the
wrong use of the parameter context.
Link: https://lkml.kernel.org/r/20250916031549.115326-1-sj@kernel.org Fixes: a30969436428 ("mm/damon/lru_sort: use damon_commit_ctx()") Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: <stable@vger.kernel.org> [6.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Optimize hugetlb_pages_alloc_boot() to return immediately when
max_huge_pages is 0, avoiding unnecessary CPU cycles and the below log
message when hugepages aren't configured in the kernel command line.
[ 3.702280] HugeTLB: allocation took 0ms with hugepage_allocation_threads=32
Link: https://lkml.kernel.org/r/20250814102333.4428-1-lirongqing@baidu.com Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Tested-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 524c48072e56 ("mm/page_alloc: rename ALLOC_HIGH to
ALLOC_MIN_RESERVE") is the start of a series that explains how __GFP_HIGH,
which implies ALLOC_MIN_RESERVE, is going to be used instead of
__GFP_ATOMIC for high atomic reserves.
Commit eb2e2b425c69 ("mm/page_alloc: explicitly record high-order atomic
allocations in alloc_flags") introduced ALLOC_HIGHATOMIC for such
allocations of order higher than 0. It still used __GFP_ATOMIC, though.
Then, commit 1ebbb21811b7 ("mm/page_alloc: explicitly define how
__GFP_HIGH non-blocking allocations accesses reserves") just turned that
check for !__GFP_DIRECT_RECLAIM, ignoring that high atomic reserves were
expected to test for __GFP_HIGH.
This leads to high atomic reserves being added for high-order GFP_NOWAIT
allocations and others that clear __GFP_DIRECT_RECLAIM, which is
unexpected. Later, those reserves lead to 0-order allocations going to
the slow path and starting reclaim.
From /proc/pagetypeinfo, without the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 1 8 10 9 7 3 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 64 20 12 5 0 0 0 0 0 0 0
With the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Link: https://lkml.kernel.org/r/20250814172245.1259625-1-cascardo@igalia.com Fixes: 1ebbb21811b7 ("mm/page_alloc: explicitly define how __GFP_HIGH non-blocking allocations accesses reserves") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Tested-by: Helen Koike <koike@igalia.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When both THP and MTE are enabled, splitting a THP and replacing its
zero-filled subpages with the shared zeropage can cause MTE tag mismatch
faults in userspace.
Remapping zero-filled subpages to the shared zeropage is unsafe, as the
zeropage has a fixed tag of zero, which may not match the tag expected by
the userspace pointer.
KSM already avoids this problem by using memcmp_pages(), which on arm64
intentionally reports MTE-tagged pages as non-identical to prevent unsafe
merging.
As suggested by David[1], this patch adopts the same pattern, replacing the
memchr_inv() byte-level check with a call to pages_identical(). This
leverages existing architecture-specific logic to determine if a page is
truly identical to the shared zeropage.
Having both the THP shrinker and KSM rely on pages_identical() makes the
design more future-proof, IMO. Instead of handling quirks in generic code,
we just let the architecture decide what makes two pages identical.
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
projects / thirdparty / kernel / stable.git / log
