generic: 5.15: add missing tag for some backports patches
Add for mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch and
hwmon-lm70-Add-ti-tmp125-support.patch the 5.18 tag as it was merged
in kernel 5.18.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Tue, 18 Oct 2022 19:01:23 +0000 (20:01 +0100)]
uboot-envtools: mediatek_filogic: fix BPi-R3 when no OS is installed
Fix accessing the environment in case no OS is installed on the flash
media selected for boot as this is possible when booting initramfs.
In case of relying on the device specified to be mounted as rootfs to
be present, rather just use the kernel cmdline 'root' variable as a
hint to decide where to read/write the U-Boot environment.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 18 Oct 2022 13:28:53 +0000 (14:28 +0100)]
uboot-mediatek: update to U-Boot 2022.10
Remove patches adding support for MT7621 which have been merged upsteam.
Patches for MT7981 and MT7986 have been merged too, but not in time to
be included in the 2022.10 release, so we have to keep carrying them
until the 2023.01 release.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hauke Mehrtens [Sat, 15 Oct 2022 10:25:19 +0000 (12:25 +0200)]
rtl8812au-ct: Fix compile
Replace the extern inline with a static inline. With extern inline the
compiler will generate the function in all compile units including this
file which breaks linking later.
Robert Marko [Tue, 27 Sep 2022 08:58:50 +0000 (10:58 +0200)]
uboot-mvebu: update to 2022.10
Update mvebu U-boot to 2022.10 to avoid backporting patches in order
to support Methode eDPU.
It also allows dropping existing patches as they are all backports.
Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs Tested-by: Russell Morris <github@rkmorris.us> # espressobin-v3-v5-1gb-1cs Tested-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [Turris Omnia] Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Jo-Philipp Wich [Fri, 14 Oct 2022 15:32:28 +0000 (17:32 +0200)]
firewall4: update to latest Git HEAD
4fbf6d7 ruleset.uc: log forwarded traffic not matched by zone policies c7201a3 main.uc: reintroduce set reload restriction 756f1e2 ruleset: fix emitting set_mark/set_xmark rules with masks 3db4741 ruleset: properly handle zone names starting with a digit 43d8ef5 fw4: fix formatting of default log prefix 592ba45 main.uc: remove uneeded/wrong set reload restrictions b0a6bff tests: fix testcases 145e159 fw4: recognize `option log` and `option counter` in `config nat` sections ce050a8 fw4: fall back to device if l3_device is not available in ifstatus
Kernel loaders like the lzma-loader currently don't track changes to
their sources. This can lead to an old version of a loader to be used
when a build tree is not clean between builds.
As the loaders are tiny and the build times are insignificant, simply
force rebuilding them on every build to avoid this problem.
mpc85xx: add SPI kernel loader for TP-Link TL-WDR4900 v1
Similar to the lzma-loader on our MIPS targets, the spi-loader acts as
a second-stage loader that will then load and start the actual kernel.
As the TL-WDR4900 uses SPI-NOR and the P1010 family does not have support
for memory mapping of this type of flash, this loader needs to contain a
basic driver for the FSL ESPI controller.
Uwe Kleine-König [Fri, 14 Oct 2022 10:23:07 +0000 (12:23 +0200)]
busybox: nslookup: ensure unique transaction IDs for the DNS queries
On machines with a coarse monotonic clock (here: TP-Link RE200 powered
by a MediaTek MT7620A) it can happen that the two DNS requests (for A
and AAAA) share the same transaction ID. If this happens the second
reply is wrongly dropped and nslookup reports "No answer".
Fix this by ensuring that the transaction IDs are unique.
generic: 5.15: backport qca8k fixup patches for Big-Endian systems
Backport qca8k fixup patches for inband mgmt on Big-Endian systems.
This is needed for ath79 and mpc85xx targets that are Big-Endian and use
qca8k based switch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Bruno Umuarama [Fri, 14 Oct 2022 00:37:39 +0000 (00:37 +0000)]
mediatek: mt7623: fix thermal zone
Raising the temperatures for passive and active trips. @VA1DER
proposed at issue 9396 to remove passive trip. This commit relates to
his suggestion.
Without this patch. the CPU will be throttled all the way down to 98MHz
if the temperature rises even a degree above the trip point, and it was
further discovered that if the internal temperature of the device is
above the first trip point temperature when it boots then it will start
in a throttled state and even
$ echo disabled > /sys/class/thermal/thermal_zone0/mode
will have no effect.
The patch increases the passive trip point and active cooling map. The
throttling temperature will then be at 77°C and 82°C, which is still a
low enough temperature for ARM devices to not be in the real danger
zone, and gives some operational headroom.
Signed-off-by: Bruno Umuarama <anonimou_eu@hotmail.com>
Felix Fietkau [Fri, 23 Sep 2022 12:12:32 +0000 (14:12 +0200)]
mac80211: change default ifname to <phy>-<type><index>
This makes it clear, which phy a wlan device belongs to and also helps with
telling them apart by including the mode in the ifname.
Preparation for automatically renaming PHYs
Felix Fietkau [Fri, 30 Sep 2022 17:19:51 +0000 (19:19 +0200)]
base-files: add helper functions for adding wlan device entries to board.json
These will be used to give WLAN PHYs a specific name based on path specified
in board.json. The platform board.d script can assign a specific order based
on available slots (PCIe slots, WMAC device) and device tree configuration.
This helps with maintaining config compatibility in case the device path
changes due to kernel upgrades.
Felix Fietkau [Thu, 13 Oct 2022 19:49:38 +0000 (21:49 +0200)]
mac80211: fix typo in netifd script
Reported-by: Chad Monroe <chad.monroe@smartrg.com> Fixes: 590eaaeed59a ("mac80211: fix issues in HE capabilities") Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Sun, 11 Sep 2022 19:53:20 +0000 (21:53 +0200)]
airoha: fix imagebuilder generation by introducing generic target
The generic imagebuilder does not have a generic in the name, although
this is the default naming scheme. Apply the same fix as for the octeon
target. Thanks to @dangowrt for reporting that the same issues applies
also for the airoha target.
Before the fix:
openwrt-imagebuilder-airoha.Linux-x86_64.tar.xz
Nick Hainke [Sat, 8 Jan 2022 07:55:21 +0000 (08:55 +0100)]
hostapd: add measurement report value for beacon reports
Add the measurement report value to the beacon reports send via ubus. It
is possible to derive from the measurement report if a station refused to
do a beacon report and why. It is important to know why a station refuses
to do a beacon-report. In particular, we should not request a beacon
report from a station again that refused a beacon-report before.
The rejection reasons can be found by looking at the bits defined by:
- MEASUREMENT_REPORT_MODE_ACCEPT
- MEASUREMENT_REPORT_MODE_REJECT_LATE
- MEASUREMENT_REPORT_MODE_REJECT_INCAPABLE
- MEASUREMENT_REPORT_MODE_REJECT_REFUSED
Suggested-by: Ian Clowes <clowes_ian@hotmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
Upstream has switched to gnu11 not too long ago. One advantage of
backporting this to these older kernels is, that we can encourage and
write better upstreamable kernels. E.g. the kernel devs prefer loop
declarations. Shrinking the master/local gap will be useful in these
cases.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Christian Marangi <ansuelsmth@gmail.com>
Huangbin Zhan [Tue, 29 Mar 2022 16:15:29 +0000 (00:15 +0800)]
build: image: use printf for ModelNameLimit16
Fix syntax error on macos, for substr is undefined results according to
the POSIX standard.
From expr on macos:
According to the POSIX standard, the use of string arguments length,
substr, index, or match produces undefined results. In this version of
expr, these arguments are treated just as their respective string values.
Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
[ wrap commit description to 80 columns and improve it ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Felix Fietkau [Mon, 10 Oct 2022 20:50:35 +0000 (22:50 +0200)]
mac80211: fix issues in HE capabilities
Enable HE SU beamformee by default
Fix spatial reuse configuration:
- he_spr_sr_control is not a bool for enabling, it contains multiple bits
which disable features that should be disabled by default
- one of the features (PSR) can be enabled through he_spr_psr_enabled
- add option to disable bss color / spatial reuse
ipq806x: 5.15: add krait-cc modernization patch and fixup
Add multiple patch for krait-cc modernization and multiple fixup for the
driver. Also modify a patch to enable the qsb fixed clock and add pxo to
krait-cc node.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ipq806x: 5.15: add boot-partitions binding to fix block warning
The patch has changed implementation and now the binding has changed.
Replace the old binding with boot-partitions and reimplement the
definition with the new definition.
The new definition is:
<offset1 size1 offset2 size2 offset3 ...>
and now supports sparsed patch.
Also add missing binding in some dts and add the backup boot partition
to the boot-partitions list.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ipq806x: 5.15: replace dtsi patches with upstream version
Reorganize dtsi patches with upstream version and drop dtsi in 5.15
files.
Also add an additional upstream patch for hwspinlock support.
Refresh all the dts with needed changes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
To actually use ccache cache on kernel test from pr, the kernel workflow
has to be run first from a push action.
This will permit as a side effect to test merged commits and catch commit
that may cause regression in kernel compilation even outside the github
system.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
lantiq: dts: vr9: Add missing properties to the CPU port on the switch
The CPU port should define the phy-mode and and a PHY phandle or
fixed-link to indicate how the CPU port is connected to the SoC's
Ethernet controller. On xRX200 this is all internal connection, so use
phy-mode = "internal" along with a fixed-link that matches the
definition inside ð0.
Linux 6.0 shows a warning since upstream commit e09e9873152e3f ("net:
dsa: make phylink-related OF properties mandatory on DSA and CPU
ports"). when these properties are missing. Adding the properties
before OpenWrt is updated to Linux 6.0 is harmless.
Suggested-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
projects / thirdparty / openwrt.git / log
