Alf reports that this commit causes the connection to eventually die on
iwl4965. The reason is that rx_status.flag is zeroed after
RX_FLAG_FAILED_FCS_CRC is set and mac80211 doesn't know the received frame is
corrupted.
Fixes: 02b682d54598 ("wifi: iwlegacy: do not skip frames with bad FCS") Reported-by: Alf Marius <post@alfmarius.net> Closes: https://lore.kernel.org/r/60f752e8-787e-44a8-92ae-48bdfc9b43e7@app.fastmail.com/ Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241112142419.1023743-1-kvalo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
In kfd_procfs_show(), the sdma_activity_work_handler is a local variable
and the sdma_activity_work_handler.sdma_activity_work should initialize
with INIT_WORK_ONSTACK() instead of INIT_WORK().
Fixes: 32cb59f31362 ("drm/amdkfd: Track SDMA utilization per process") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In current logic, it calls ring_alloc followed by a ring_test. ring_test
in turn will call another ring_alloc. This is illegal usage as a
ring_alloc is expected to be closed properly with a ring_commit. Change
to commit the map/unmap queue packet first followed by a ring_test. Add a
comment about the usage of ring_test.
Also, reorder the current pre-condition checks of job hang or kiq ring
scheduler not ready. Without them being met, it is not useful to attempt
ring or memory allocations.
Fixes tag refers to the original patch which introduced this issue which
then got carried over into newer code.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 6c10b5cc4eaa ("drm/amdgpu: Remove duplicate code in gfx_v8_0.c") Signed-off-by: Sasha Levin <sashal@kernel.org>
Since we no longer shut down the device in suspend, we also no longer
call iwl_mvm_mei_device_state() and this is a problem because iwlmei
expects this to be called when it runs its own suspend sequence. It
checks mei->device_down in iwl_mei_remove() which is called upon
suspend.
Fix this by telling iwlmei when we're done accessing the device.
When we'll wake up, the device should be untouched if CSME didn't use it
during the suspend time. If CSME used it, we'll notice it through the
CSR_FUNC_SCRATCH register.
This feature can be used on ax200 as well. It'll avoid to restart the
firmware upon suspend / resume flow. Doing so also avoids releasing and
re-allocating all the device related memory which makes the memory's
subsystem task easier.
Currently, when the driver attempts to connect to an AP MLD with multiple
APs, the cfg80211_mlme_check_mlo_compat() function requires the Medium
Synchronization Delay values from different APs of the same AP MLD to be
equal, which may result in connection failures.
This is because when the driver receives a multi-link probe response from
an AP MLD with multiple APs, cfg80211 updates the Elements for each AP
based on the multi-link probe response. If the Medium Synchronization Delay
is set in the multi-link probe response, the Elements for each AP belonging
to the same AP MLD will have the Medium Synchronization Delay set
simultaneously. If non-multi-link probe responses are received from
different APs of the same MLD AP, cfg80211 will still update the Elements
based on the non-multi-link probe response. Since the non-multi-link probe
response does not set the Medium Synchronization Delay
(IEEE 802.11be-2024-35.3.4.4), if the Elements from a non-multi-link probe
response overwrite those from a multi-link probe response that has set the
Medium Synchronization Delay, the Medium Synchronization Delay values for
APs belonging to the same AP MLD will not be equal. This discrepancy causes
the cfg80211_mlme_check_mlo_compat() function to fail, leading to
connection failures. Commit ccb964b4ab16
("wifi: cfg80211: validate MLO connections better") did not take this into
account.
To address this issue, remove this validity check.
The CI is hitting some aperiodic hangup at device removal time in the
pmtu.sh self-test:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6
ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at
dst_init+0x84/0x4a0
dst_alloc+0x97/0x150
ip6_dst_alloc+0x23/0x90
ip6_rt_pcpu_alloc+0x1e6/0x520
ip6_pol_route+0x56f/0x840
fib6_rule_lookup+0x334/0x630
ip6_route_output_flags+0x259/0x480
ip6_dst_lookup_tail.constprop.0+0x5c2/0x940
ip6_dst_lookup_flow+0x88/0x190
udp_tunnel6_dst_lookup+0x2a7/0x4c0
vxlan_xmit_one+0xbde/0x4a50 [vxlan]
vxlan_xmit+0x9ad/0xf20 [vxlan]
dev_hard_start_xmit+0x10e/0x360
__dev_queue_xmit+0xf95/0x18c0
arp_solicit+0x4a2/0xe00
neigh_probe+0xaa/0xf0
While the first suspect is the dst_cache, explicitly tracking the dst
owing the last device reference via probes proved such dst is held by
the nexthop in the originating fib6_info.
Similar to commit f5b51fe804ec ("ipv6: route: purge exception on
removal"), we need to explicitly release the originating fib info when
disconnecting a to-be-removed device from a live ipv6 dst: move the
fib6_info cleanup into ip6_dst_ifdown().
Tested running:
./pmtu.sh cleanup_ipv6_exception
in a tight loop for more than 400 iterations with no spat, running an
unpatched kernel I observed a splat every ~10 iterations.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/604c45c188c609b732286b47ac2a451a40f6cf6d.1730828007.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Found in the test_txmsg_pull in test_sockmap,
```
txmsg_cork = 512; // corking is importrant here
opt->iov_length = 3;
opt->iov_count = 1;
opt->rate = 512; // sendmsg will be invoked 512 times
```
The first sendmsg will send an sk_msg with size 3, and bpf_msg_pull_data
will be invoked the first time. sk_msg_reset_curr will reset the copybreak
from 3 to 0. In the second sendmsg, since we are in the stage of corking,
psock->cork will be reused in func sk_msg_alloc. msg->sg.copybreak is 0
now, the second msg will overwrite the first msg. As a result, we could
not pass the data integrity test.
The same problem happens in push and pop test. Thus, fix sk_msg_reset_curr
to restore the correct copybreak.
Fixes: bb9aefde5bba ("bpf: sockmap, updating the sg structure should also update curr") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Link: https://lore.kernel.org/r/20241106222520.527076-9-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several fixes to bpf_msg_pop_data,
1. In sk_msg_shift_left, we should put_page
2. if (len == 0), return early is better
3. pop the entire sk_msg (last == msg->sg.size) should be supported
4. Fix for the value of variable "a"
5. In sk_msg_shift_left, after shifting, i has already pointed to the next
element. Addtional sk_msg_iter_var_next may result in BUG.
Fixes: 7246d8ed4dcc ("bpf: helper to pop data from messages") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-8-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several fixes to bpf_msg_push_data,
1. test_sockmap has tests where bpf_msg_push_data is invoked to push some
data at the end of a message, but -EINVAL is returned. In this case, in
bpf_msg_push_data, after the first loop, i will be set to msg->sg.end, add
the logic to handle it.
2. In the code block of "if (start - offset)", it's possible that "i"
points to the last of sk_msg_elem. In this case, "sk_msg_iter_next(msg,
end)" might still be called twice, another invoking is in "if (!copy)"
code block, but actually only one is needed. Add the logic to handle it,
and reconstruct the code to make the logic more clear.
Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Link: https://lore.kernel.org/r/20241106222520.527076-7-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter") Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The opt->iocharset is freed inside the isofs_fill_super function,
But there may be situations where it's not possible to
enter this function.
For example, in the get_tree_bdev_flags function,when
encountering the situation where "Can't mount, would change RO state,"
In such a case, isofs_fill_super will not have the opportunity
to be called,which means that opt->iocharset will not have the chance
to be freed,ultimately leading to a memory leak.
Let's move the memory freeing of opt->iocharset into
isofs_free_fc function.
Fixes: 1b17a46c9243 ("isofs: convert isofs to use the new mount API") Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20241106082841.51773-1-hao.ge@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to support UM in calculating rates of GPU utilisation, the current
operating and maximum GPU clock frequencies must be recorded during device
initialisation, and also during OPP state transitions.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923230912.2207320-3-adrian.larumbe@collabora.com
Stable-dep-of: 21c23e4b64e3 ("drm/panthor: Fix OPP refcnt leaks in devfreq initialisation") Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable calculations of job submission times in clock cycles and wall
time. This is done by expanding the boilerplate command stream when running
a job to include instructions that compute said times right before and
after a user CS.
A separate kernel BO is created per queue to store those values. Jobs can
access their sampled data through an index different from that of the
queue's ringbuffer. The reason for this is saving memory on the profiling
information kernel BO, since the amount of simultaneous profiled jobs we
can write into the queue's ringbuffer might be much smaller than for
regular jobs, as the former take more CSF instructions.
This commit is done in preparation for enabling DRM fdinfo support in the
Panthor driver, which depends on the numbers calculated herein.
A profile mode mask has been added that will in a future commit allow UM to
toggle performance metric sampling behaviour, which is disabled by default
to save power. When a ringbuffer CS is constructed, timestamp and cycling
sampling instructions are added depending on the enabled flags in the
profiling mask.
A helper was provided that calculates the number of instructions for a
given set of enablement mask, and these are passed as the number of credits
when initialising a DRM scheduler job.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923230912.2207320-2-adrian.larumbe@collabora.com
Stable-dep-of: 21c23e4b64e3 ("drm/panthor: Fix OPP refcnt leaks in devfreq initialisation") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit f11b0417eec2 ("drm/panfrost: Add fdinfo support GPU load metrics")
retrieves the OPP for the maximum device clock frequency, but forgets to
keep the reference count balanced by putting the returned OPP object. This
eventually leads to an OPP core warning when removing the device.
Fix it by putting OPP objects as many times as they're retrieved.
This commit fix a typographical error in netlink nlmsg_type constants definition in the include/uapi/linux/rtnetlink.h at line 177. The definition is RTM_NEWNVLAN RTM_NEWVLAN instead of RTM_NEWVLAN RTM_NEWVLAN.
Signed-off-by: Maurice Lambert <mauricelambert434@gmail.com> Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support") Link: https://patch.msgid.link/20241103223950.230300-1-mauricelambert434@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update of stateful object triggers:
WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:7759 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/3060:
#0: ffff88810f0578c8 (&nft_net->commit_mutex){+.+.}-{4:4}, [..]
... but this list is not protected by the transaction mutex but the
nfnl nftables subsystem mutex.
Switch to nft_obj_type_get which will acquire rcu read lock,
bump refcount, and returns the result.
v3: Dan Carpenter points out nft_obj_type_get returns error pointer, not
NULL, on error.
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
Pointers passed to tp_btf were trusted to be valid, but some tracepoints
do take NULL pointer as input, such as trace_tcp_send_reset(). Then the
invalid memory access cannot be detected by verifier.
This patch fix it by add a suffix "__nullable" to the unreliable
argument. The suffix is shown in btf, and PTR_MAYBE_NULL will be added
to nullable arguments. Then users must check the pointer before use it.
A problem here is that we use "btf_trace_##call" to search func_proto.
As it is a typedef, argument names as well as the suffix are not
recorded. To solve this, I use bpf_raw_event_map to find
"__bpf_trace##template" from "btf_trace_##call", and then we can see the
suffix.
Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-2-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL") Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix two issues with memory allocation in amdgpu_discovery_get_nps_info()
for mem_ranges:
- Add a check for allocation failure to avoid dereferencing a null
pointer.
- As suggested by Christophe, use kvcalloc() for memory allocation,
which checks for multiplication overflow.
Additionally, assign the output parameters nps_type and range_cnt after
the kvcalloc() call to prevent modifying the output parameters in case
of an error return.
Fixes: b194d21b9bcc ("drm/amdgpu: Use NPS ranges from discovery table") Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Li Huafei <lihuafei1@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
CRTC creation uses drmm_crtc_init_with_planes(), which automatically
handles cleanup. However, an unnecessary call to drm_crtc_cleanup() is
still present in the vkms_output_init() error path.
Fixes: 99cc528ebe92 ("drm/vkms: Use drmm_crtc_init_with_planes()") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241031183835.3633-1-jose.exposito89@gmail.com Acked-by: Louis Chauvet <louis.chauvet@bootlin.com> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are three situations when a program logically exits and transfers
control to the kernel or another program: bpf_throw, BPF_EXIT, and tail
calls. The former two check for any lingering locks and references, but
tail calls currently do not. Expand the checks to check for spin locks,
RCU read sections and preempt disabled sections.
Spin locks are indirectly preventing tail calls as function calls are
disallowed, but the checks for preemption and RCU are more relaxed,
hence ensure tail calls are prevented in their presence.
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/ Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wfx_core_init() returns without checking the retval from
sdio_register_driver().
If the sdio_register_driver() failed, the module failed to install,
leaving the wfx_spi_driver not unregistered.
Fixes: a7a91ca5a23d ("staging: wfx: add infrastructure for new driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241022090453.84679-1-yuancan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Prevent userspace accesses to the DRM device from causing
use-after-frees by unplugging the device before we remove it. This
causes any further userspace accesses to result in an error without
further calls into this driver's internals.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/ Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: ca081fff6ecc ("drm/nouveau/gr/gf100-: generate golden context during first object alloc") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241026173844.2392679-1-lihuafei1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13
when IPS enabled.
Original HPD detection interval is set to 5s which violates DP
compliance.
Reduce the interval parameter, such that link training can be
finished within 5 seconds.
Fixes: afca033f10d3 ("drm/amd/display: Add periodic detection for IPS") Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Idle worker thread waits HPD_DETECTION_TIME for HPD processing complete.
Some displays require longer time for that.
[How]
Increase HPD_DETECTION_TIME to 100ms.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: a88b19b13fb4 ("drm/amd/display: Reduce HPD Detection Interval for IPS") Signed-off-by: Sasha Levin <sashal@kernel.org>
The perfmon sampling mutates shared GPU state (e.g. VIVS_HI_CLOCK_CONTROL
to select the pipe for the perf counter reads). To avoid clashing with
other functions mutating the same state (e.g. etnaviv_gpu_update_clock)
the perfmon sampling needs to hold the GPU lock.
Fixes: 68dc0b295dcb ("drm/etnaviv: use 'sync points' for performance monitor requests") Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove __GFP_HIGHMEM when requesting a page from DMA32 zone,
and since all vivante GPUs in the system will share the same
DMA constraints, move the check of whether to get a page from
DMA32 to etnaviv_bind().
Fixes: b72af445cd38 ("drm/etnaviv: request pages from DMA32 zone when needed") Suggested-by: Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
When a bpf prog is attached, the nop instruction is patched to a call
to bpf trampoline:
mov x9, lr
bl <bpf trampoline>
So two return addresses are passed to bpf trampoline: the return address
for the traced function/prog, stored in x9, and the return address for
the bpf trampoline itself, stored in lr. To obtain a full and accurate
call stack, the bpf trampoline constructs two fake function frames using
x9 and lr.
However, struct_ops progs are invoked directly as function callbacks,
meaning that x9 is not set as it is in the fentry callsite. In this case,
the frame constructed using x9 is garbage. The following stack trace for
struct_ops, captured by perf sampling, illustrates this issue, where
tcp_ack+0x404 is a garbage frame:
Since BPF skeleton inception libbpf has been doing mmap()'ing of global
data ARRAY maps in bpf_object__load_skeleton() API, which is used by
code generated .skel.h files (i.e., by BPF skeletons only).
This is wrong because if BPF object is loaded through generic
bpf_object__load() API, global data maps won't be re-mmap()'ed after
load step, and memory pointers returned from bpf_map__initial_value()
would be wrong and won't reflect the actual memory shared between BPF
program and user space.
bpf_map__initial_value() return result is rarely used after load, so
this went unnoticed for a really long time, until bpftrace project
attempted to load BPF object through generic bpf_object__load() API and
then used BPF subskeleton instantiated from such bpf_object. It turned
out that .data/.rodata/.bss data updates through such subskeleton was
"blackholed", all because libbpf wouldn't re-mmap() those maps during
bpf_object__load() phase.
Long story short, this step should be done by libbpf regardless of BPF
skeleton usage, right after BPF map is created in the kernel. This patch
moves this functionality into bpf_object__populate_internal_map() to
achieve this. And bpf_object__load_skeleton() is now simple and almost
trivial, only propagating these mmap()'ed pointers into user-supplied
skeleton structs.
We also do trivial adjustments to error reporting inside
bpf_object__populate_internal_map() for consistency with the rest of
libbpf's map-handling code.
Global variables of special types (like `struct bpf_spin_lock`) make
underlying ARRAY maps non-mmapable. To make this work with libbpf's
mmaping logic, application is expected to declare such special variables
as static, so libbpf doesn't even attempt to mmap() such ARRAYs.
test_spin_lock_fail.c didn't follow this rule, but given it relied on
this test to trigger failures, this went unnoticed, as we never got to
the step of mmap()'ing these ARRAY maps.
It is fragile and relies on specific sequence of libbpf steps, which are
an internal implementation details.
Fix the test by marking lockA and lockB as static.
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: ab58a416c93f ("octeontx2-pf: cn10k: Get max mtu supported from admin function") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Anbernic RG35XX devices use an SPI LCD panel from an unknown OEM,
with an NV3052C driver chip.
As discussed previously, the integrating vendor and device name are
preferred instead of the OEM serial. A previous patch corrected the
device tree binding and of_device_id in the NV3052C driver, however the
spi_device_id also needs correction.
The PIXCLK needs to be enabled in SCFG before accessing certain DCU
registers, or the access will hang. For simplicity, the PIXCLK is enabled
unconditionally, resulting in increased power consumption.
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems it is necessary to set WILC MAC address after operation mode,
otherwise the MAC address of the WILC MAC is reset back to what is in
nvmem. This causes a failure to associate with AP after the WILC MAC
address was overridden by userspace.
AP still indicates SA with original MAC address from nvmem without this patch:
"
nl80211: RX frame da=ff:ff:ff:ff:ff:ff sa=60:01:23:45:67:89 bssid=ff:ff:ff:ff:ff:ff ...
^^^^^^^^^^^^^^^^^
"
Fixes: 83d9b54ee5d4 ("wifi: wilc1000: read MAC address from fuse at probe") Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241003132504.52233-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap") Fixes: 16edddfe3c5d ("selftests/bpf: test_sockmap, check test failure") Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.
However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.
Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...
Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
As the same condition was checked in inner and outer if statements.
The code never reaches the inner else statement.
Fix this by removing the logically dead inner else statement.
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.
Fixes: 45e45362e095 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Commit 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum")
incorrectly swapped a check of hvs->vc4->is_vc5 to
hvs->vc4->gen == VC4_GEN_4 in vc4_hvs_lut_load, hence breaking
loading the gamma look up table on Pi0-3.
Correct that conditional.
Fixes: 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-3-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711")
added a return path to vc4_hvs_lut_load that had called
drm_dev_enter, but not drm_dev_exit.
Ensure we call drm_dev_exit.
Fixes: 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-1-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With the introduction of the BCM2712 support, we will get yet another
generation of display engine to support.
The binary check of whether it's VC5 or not thus doesn't work anymore,
especially since some parts of the driver will have changed with BCM2711,
and some others with BCM2712.
Let's introduce an enum to store the generation the driver is running
on, which should provide more flexibility.
The ice_vc_cfg_qs_msg() function is used to configure VF queues in response
to a VIRTCHNL_OP_CONFIG_VSI_QUEUES command.
The virtchnl command contains an array of queue pair data for configuring
Tx and Rx queues. This data includes a queue ID. When configuring the
queues, the driver generally uses this queue ID to determine which Tx and
Rx ring to program. However, a handful of places use the index into the
queue pair data from the VF. While most VF implementations appear to send
this data in order, it is not mandated by the virtchnl and it is not
verified that the queue pair data comes in order.
Fix the driver to consistently use the q_idx field instead of the 'i'
iterator value when accessing the rings. For the Rx case, introduce a local
ring variable to keep lines short.
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f9955 ("wifi: mac80211: add support for DFS with multiple radios") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Currently, mem_ce and mem iomem addresses are used to calculate the
CE offset address. mem_ce is initialized with mem address, and for
targets where ce_remap is needed, mem_ce is remapped to a new address
space during AHB probe.
For targets such as WCN6750 in which CE address space is same as WCSS
address space (i.e. "ce_remap" hw_param is set to false), mem_ce and
mem iomem addresses are same. In the initial SRNG setup for such targets,
the CE offset address and hence CE register base addresses are
calculated correctly in ath11k_hal_srng_init() as both mem and mem_ce
are initialized with same iomem address.
Later, after the firmware download, mem is initialized with BAR address
received in qmi_wlanfw_device_info_resp_msg_v01 QMI message, while mem_ce
is not updated.
After initial setup success, during Subsystem Restart (SSR), as part
of reinitialization, ath11k_hal_srng_init() will be called again,
and CE offset address will be calculated incorrectly this time as mem_ce
address was not updated. Due to the incorrect CE offset address,
APPS accesses an invalid CE register address which leads to improper
behavior in firmware after SSR is triggered.
To fix the above issue, update mem_ce to mem iomem address in
ath11k_qmi_request_device_info() for targets which do not support
ce_remap feature.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com> Fixes: b42b3678c91f ("wifi: ath11k: remap ce register space for IPQ5018") Link: https://patch.msgid.link/20240927095825.22317-1-quic_bpothuno@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
netns_new()/netns_free() create/delete network namespaces. They support the
option '-m' of test_progs to start/stop traffic monitor for the network
namespace being created for matched tests.
Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240815053254.470944-4-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 5bf1557e3d6a ("selftests/bpf: Fix backtrace printing for selftests crashes") Signed-off-by: Sasha Levin <sashal@kernel.org>
During the xdp_adjust_tail test, probabilistic failure occurs and SKB package
is discarded by the kernel. After checking the issues by tracking SKB package,
it is identified that they were caused by checksum errors. Refer to checksum
of the arch/arm64/include/asm/checksum.h for fixing.
v2: Based on Alexei Starovoitov's suggestions, it is necessary to keep the code
implementation consistent.
A previous patch addressed a fortified-memcpy warning on older compilers,
but there is still a warning on gcc-14 in some configurations:
In file included from include/linux/string.h:390,
from drivers/net/wireless/ath/ath12k/wow.c:7:
drivers/net/wireless/ath/ath12k/wow.c: In function 'ath12k_wow_convert_8023_to_80211.isra':
include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551610 or more bytes at offsets 0 and 0 overlaps 9223372036854775797 bytes at offset -9223372036854775803 [-Werror=restrict]
include/linux/fortify-string.h:679:26: note: in expansion of macro '__fortify_memcpy_chk'
679 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:199:25: note: in expansion of macro 'memcpy'
199 | memcpy(pat + a3_ofs - pkt_ofs,
| ^~~~~~
Address this the same way as the other two, using size_add().
Fixes: b49991d83bba ("wifi: ath12k: fix build vs old compiler") Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004095420.637091-1-arnd@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery
scenarios") added the change to decrement the pending packets count
in case of recovery which make sense as ah->hw as well all
ar's in it are intact during recovery, but during core deinit there
is no use in decrementing packets count or waking up the empty waitq
as the module is going to be removed also ar's from pending skb's
can't be used and the packets should just be released back.
To fix this, avoid accessing ar from skb->cb when driver is being
unregistered.
This is caused by lost memory during early init phase. First time driver
is removed, memory is freed but when second time the driver is inserted,
VBIOS dmub is not active, since the PSP policy is to retain the driver
loaded version on subsequent warm boots. Hence, communication with VBIOS
DMUB fails.
Fix this by aborting further communication with vbios dmub and release
the memory immediately.
Fixes: f59549c7e705 ("drm/amd/display: free bo used for dmub bounding box") Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In STA+AP concurrent mode, performing a scan operation on one vif
temporarily stops beacons on the other. When the scan is completed,
beacons are enabled again with BSS_CHANGED_BEACON_ENABLED.
We can observe that no beacons are being sent when just
rtl8xxxu_start_tx_beacon() is being called.
Thus, also perform update_beacon_work in order to restore beaconing.
The arguments got swapped by commit 986ae3c2a8df ("dlm: fix race between
final callback and remove") fixing this now.
Fixes: 986ae3c2a8df ("dlm: fix race between final callback and remove") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Object linking output data uses the default ELF_T_BYTE type for '.symtab'
section data, which disables any libelf-based translation. Explicitly set
the ELF_T_SYM type for output to restore libelf's byte-order conversion,
noting that input '.symtab' data is already correctly translated.
Referenced commit broke the logic of resetting expected_attach_type to
zero for allowed program types if kernel doesn't yet support such field.
We do need to overwrite and preserve expected_attach_type for
multi-uprobe though, but that can be done explicitly in
libbpf_prepare_prog_load().
Fixes: 5902da6d8a52 ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt") Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Tao Chen <chen.dylane@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 11feaef69d0c ("drm/bridge: it6505: Add caching for EDID") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The DT bindings deprecated the "hp-det-gpio" and "mic-det-gpio"
properties in favor of "hp-det-gpios" and "mic-det-gpios", but the
driver was never updated to support the latter.
Even before, there existed users of "hp-det-gpios" and "mic-det-gpios".
While this may have been handled fine by the ASoC core, this was missed
by the Freescale-specific part.
Fixes: 4189b54220e5af15 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML") Fixes: 40ba2eda0a7b727f ("arm64: dts: imx8mm-nitrogen-r2: add audio") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://patch.msgid.link/dbcb5bfea005a468ec6dc38374fe6d02bc693c22.1727438777.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
projects / thirdparty / kernel / stable.git / log
