Peter Krempa [Fri, 9 Aug 2024 12:21:23 +0000 (14:21 +0200)]
testQemuConfXMLCommon: Strip 'abs_srcdir' paths from '.err' files in qemuxmlconftest
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-hypervisor now supports restoring with new net fds.
Ref: https://github.com/cloud-hypervisor/cloud-hypervisor/pull/6402
So, pass new tap fds via SCM_RIGHTS to CH's restore api.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of curl, use low-level socket connections to make restore api
request to CH. This will enable passing new net FDs to CH while
restoring domains with network configuration.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
chSocketRecv fn can be used by operations such as restore, which cannot
have a specific poll timeout. The runtime of these operations at server
side (vmm) cannot be determined or capped as it depends on the guest
configuration. Hence, add a new parameter 'use_timeout' which when set
will pass -1 as timeout to poll, otherwise the default PKT_TIMEOUT_MS is
used.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass "net_<index>" as net id to CH. This is to have better control over
the network configs. This id can be further used in performing
operations like restore etc.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 8 Aug 2024 15:11:04 +0000 (17:11 +0200)]
qemuxmlconftest: Don't use soon-to-be-removed machine types
Latest qemu will be dropping some very old machine types (2.0 - 2.3) and
some of our tests use them. As in none of the cases the test actually
needs given machine type, switch them to 'pc' instead.
In one case 'numavcpus-topology-mismatch' this caused switch to a more
modern syntax for NUMA memory specification, but the test is testing a
different aspect, thus we can modernize this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Thu, 8 Aug 2024 11:02:08 +0000 (13:02 +0200)]
qemu: Avoid false failure when resuming post-copy migration
Depending on timing between QEMU and libvirt an attempt to resume failed
post-copy migration could immediately report a failure in post-copy
phase again even though the migration actually resumed and is
progressing just fine.
This is caused by QEMU reporting the original migration state (i.e.,
postcopy-paused) until migration is successfully resumed and QEMU
switches to postcopy-active. QEMU 9.1 introduced a new
postcopy-recover-setup migration state which is entered immediately
after requesting migration to be resumed and we can reliably wait for
the migration to either continue or fail without being confused by the
old state.
https://issues.redhat.com/browse/RHEL-22166
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Thu, 8 Aug 2024 09:45:16 +0000 (11:45 +0200)]
qemu: Add support for postcopy-recover-setup migration state
This patch adds support for recognizing the new migration state reported
by QEMU when post-copy recovery is requested. It is not actually used
for anything yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vsh: Allow vshReadlineInit() to be called multiple times
Thing about vshReadlineInit() is - it's called multiple times.
The first time from vshInit(), when @ctl was filled only
partially (most notably, before any argv parsing is done, hence
ctl->imode is set to false). The second time after argv parsing,
from virshInit() -> vshInitReload(). In here, ctl->imode might
have changed and thus vshReadlineInit() can't exit early - it
needs to set up stuff for interactive mode (history basically).
To allow vshReadlineInit() to be called again,
vshReadlineDeinit() must set @autoCompleteOpaque to NULL.
Adam Julis [Tue, 6 Aug 2024 07:01:42 +0000 (09:01 +0200)]
network: fix crashing "modify" option for hostname
The original condition caused (after adding modify option)
possibly access to not allocated memory. For consistency added
new check for multiple same records.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/654 Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adam Julis [Tue, 6 Aug 2024 07:01:24 +0000 (09:01 +0200)]
network: NULL check for "modify" DNS-txt records
The "modify" command allowed to replace an existing record, now
checks for the NULL string in the new value and throw error if
found.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/655 Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 31 Jul 2024 10:38:23 +0000 (12:38 +0200)]
qemuxmlconftest: Add tests for the ACPI stripping hack on s390
Replace the 'misc-acpi' case by testing a bunch of architectures for how
ACPI is handled including a test for the s390 ACPI strip hack added in
previous commit.
The input files are adapted from the corresponding '-minimal.xml' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Peter Krempa [Wed, 31 Jul 2024 09:34:59 +0000 (11:34 +0200)]
qemu_domain: Strip <acpi/> from s390(x) definitions
The s390(x) machines never supported ACPI. That didn't stop users
enabling ACPI in their config. As of libvirt-9.2 (98c4e3d073) with new
enough qemu we reject configs which require ACPI, but qemu can't satisfy
it.
This breaks migration of existing VMs with the old wrong configs to new
libvirt installations.
To address this introduce a post-parse fixup removing the ACPI flag
specifically for s390 machines which do enable it in the definition.
The advantage of doing it in post-parse, rather than simply relaxing the
ABI stability check to allow users providing an fixed XML when migrating
(allowing change of the ACPI flag for s390 in ABI stability check, as it
doesn't impact ABI), is that only the destination installation needs to
be patched in order to preserve migration.
To mitigate the disadvantage of simply stripping it from all s390(x)
configs the hack is not applied when defining or starting a new domain
from the XML, to preserve the error about unsupported configuration.
Resolves: https://issues.redhat.com/browse/RHEL-49516 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Michal Privoznik [Tue, 30 Jul 2024 15:36:40 +0000 (17:36 +0200)]
security: Allow RW access to pstore device
The whole point of pstore device is that the guest writes crash
dumps into it. But the way SELinux label is set on the
corresponding file warrants RO access only. This is due to a
copy-paste from code around: kernel/initrd/DTB/SLIC - these are
RO indeed, but pstore MUST be writable too. In a sense it's
closer to NVRAM/disks - hence set imagelabel on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Tue, 30 Jul 2024 15:36:39 +0000 (17:36 +0200)]
qemu: Pre-create pstore device file
So far we are relying on QEMU or sysadmin to create the file for
pstore. This is suboptimal as in the case of the former we can
not set proper seclabels (there's nothing to set seclabels on
until QEMU is started).
Therefore, make sure the file is created before launching QEMU
and that it has the correct size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Tue, 30 Jul 2024 04:43:34 +0000 (06:43 +0200)]
NEWS: Document features/improvements/bug fixes I've participated in
There are some features/improvements/bug fixes I've either
contributed or reviewed/merged. Document them for upcoming
release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Michal Privoznik [Mon, 29 Jul 2024 07:43:35 +0000 (09:43 +0200)]
qemu: Autofill pstore path if missing
Introduced only a couple of commits ago (in v10.5.0-84-g90e50e67c6) the pstore device acts as a nonvolatile
storage, where guest kernel can store information about crashes.
This device, however, expects a file in the host from which the
crash data is read. So far, we expected users to provide a path,
but we can autogenerate one if missing. Just put it next to
per-domain's NVRAM stores.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Thu, 18 Jul 2024 13:09:22 +0000 (15:09 +0200)]
virsysinfo: Calculate OEM string index better
As can be seen in earlier commits, there can be two OEM strings
with the same index. But since our parser
(virSysinfoParseOEMStrings()) doesn't expect that, it increments
index in each run and thus skips over these strings.
Fortunately, we have the right index at hand - we're just
skipping over it in a loop. Just reconstruct the index back
inside the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now, this poses a problem, because when one tries to obtain
individual strings, they get:
# dmidecode -q --oem-string 1
Default string
ThunderX2 System
# dmidecode -q --oem-string 2
No OEM string number 2
cavium.com
NB, the "No OEM string number 2" is printed onto stderr and
everything else onto stdout. Oh, and trying to get OEM strings
from just one section doesn't fly:
# dmidecode -q -H 0x1d --oem-string 2
Options --string, --type, --handle and --dump-bin are mutually exclusive
This means two things:
1) we have no way of distinguishing OEM strings at the same index
but in different sections,
2) because of how virSysinfoDMIDecodeOEMString() is written, we
fail in querying OEM string that exists in one section but not
in the others (for instance string #2 from example above).
While there's not much we can do about 1), there is something
that can be done about 2) - refine the error condition and make
the function return an error iff there's nothing on stdout and
there's something on stderr.
Resolves: https://issues.redhat.com/browse/RHEL-45952 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Thu, 18 Jul 2024 06:22:27 +0000 (08:22 +0200)]
tests: Add HPE Apollo test case to sysinfotest
Introduce a test case for sysinfotest. The data was obtained by
running dmidecode as libvirt would run it:
dmidecode -q -t 0,1,2,3,4,11,17
Now, the expected output fits almost perfectly, except for OEM
strings where the third string looks nothing like in the
dmidecode output. This is because of testDMIDecodeDryRun() which
overwrites the third OEM string (see v6.5.0-rc1~214 for more
info). But that's okay for now.
Speaking of OEM strings, it's worth noticing two 'OEM Strings'
sections in the dmidecode output. This is causing some troubles
and will be fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Thu, 18 Jul 2024 13:13:30 +0000 (15:13 +0200)]
virsysinfo: Trim newline when decoding OEM strings
dmidecode always puts a newline character at the end of each
OEM string it prints. It's the dmi_oem_strings() function [1] that
iterates over strings and calls pr_attr() over each one which
puts "\n" at the end, unconditionally [2[.
Since it's not part of the string though, trim it.
Michal Privoznik [Thu, 18 Jul 2024 07:37:55 +0000 (09:37 +0200)]
vircommand: Initialize dryRunStatus to portable EXIT_SUCCESS instead of 0
If dry run of a command was requested (virCommandSetDryRun())
then a specified callback is called instead of running actual
command. This is meant to be used in tests. To mimic running the
command as closely as possible the callback can also set exit
status of the command it's implementing. To save some lines
though, the exit status is initialized to 0 so that callback has
to set it only on failures. Now, 0 is not exactly portable value
- that's why stdlib.h has EXIT_SUCCESS (and EXIT_FAILURE) values.
Initialize the exit status (held in dryRunStatus) to EXIT_SUCCESS
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The acpi-erst backend for pstore device exposes a path in the
host accessible to the guest and as such we must set seclabels on
it to grant QEMU RW access.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Boris Fiuczynski [Fri, 19 Jul 2024 15:44:18 +0000 (17:44 +0200)]
qemu: add a monitor to /proc/$pid when killing times out
In cases when a QEMU process takes longer than the time sigterm and
sigkill are issued to kill the process do not simply fail and leave the
VM in state VIR_DOMAIN_SHUTDOWN until the daemon stops. Instead set up
an fd on /proc/$pid and get notified when the QEMU process finally has
terminated to cleanup the VM state.
Resolves: https://issues.redhat.com/browse/RHEL-28819 Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu_hotplug: Do not allow absent values in rom settings
If there are absent values in an already existing element
specifying rom settings, we simply use the old ones. This
behaviour is not desired, as users might think that deleting the
element from XML would delete the setting (because the hotplug
succeeds) - which does not happen. Because of that, we should not
accept an interface without elements that cannot be changed.
Therefore, we should not allow absent values for already existing
rom setting during hotplug.
Resolves: https://issues.redhat.com/browse/RHEL-7109 Signed-off-by: Kristina Hanicova <khanicov@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
John Levon [Wed, 24 Jul 2024 08:56:04 +0000 (09:56 +0100)]
meson: correct git detection
The current "building from git" test uses "test -d .git"; however, that
doesn't work when libvirt is used as a submodule, as in that case .git
is a normal file. Use "test -e .git" instead.
Signed-off-by: John Levon <john.levon@nutanix.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Tue, 23 Jul 2024 08:31:27 +0000 (10:31 +0200)]
virt-host-validate: Allow longer list of CPU flags
On various occasions, virt-host-validate parses /proc/cpuinfo to
learn about CPU flags (see virHostValidateGetCPUFlags()). It does
so, by reading the file line by line until the line with CPU
flags is reached. Then the line is split into individual flags
(using space as a delimiter) and the list of flags is then
iterated over.
This works, except for cases when the line with CPU flags is too
long. Problem is - the line is capped at 1024 bytes and on newer
CPUs (and newer kernels), the line can be significantly longer.
I've seen a line that's ~1200 characters long (with 164 flags
reported).
Switch to unbounded read from the file (getline()).
Resolves: https://issues.redhat.com/browse/RHEL-39969 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Miroslav Los [Tue, 4 Jun 2024 11:10:59 +0000 (11:10 +0000)]
security: AppArmor allow write when os loader readonly=no
Since libvirt commit 3ef9b51b10e52886e8fe8d75e36d0714957616b7,
the pflash storage for the os loader file follows its read-only flag,
and qemu tries to open the file for writing if set so.
This patches virt-aa-helper to generate the VM's AppArmor rules
that allow this, using the same domain definition flag and default.
Signed-off-by: Miroslav Los <mirlos@cisco.com> Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This scenario is going to be ever more popular, especially now
that virt-manager has started using UEFI by default on riscv64
(see https://github.com/virt-manager/virt-manager/pull/670/).
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adam Julis [Tue, 16 Jul 2024 09:41:09 +0000 (11:41 +0200)]
qemu: virtiofs: format --rlimit-nofile
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/485 Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmx: Be even more lax when trying to comprehend serial ports
So much can happen in the fileName field of the VMX that the easiest
thing is to silently report a serial type="null".
This effectively reverts commits de81bdb8d4cd and 62c53db0421a, but
keeps the test files to show the fix is still in place.
There is one instance where an error gets reset, but since that is a
rare case on its own and on top of that does not happen in any of our
long-running daemons with a logfile that might get monitored it should
be fine to leave it there.
Andrea Bolognani [Fri, 12 Jul 2024 12:18:20 +0000 (14:18 +0200)]
cpu_map: Add pauth Arm CPU feature
This CPU feature can be used to explicitly enable or disable
support for pointer authentication. By default, it will be
enabled if the host supports it.
https://issues.redhat.com/browse/RHEL-7044
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu: Don't leave beingDestroyed=true on inactive domain
Recent commit v10.4.0-87-gd9935a5c4f made a reasonable change to only
reset beingDestroyed back to false when vm->def->id is reset to make
sure other code can detect a domain is (about to become) inactive. It
even added a comment saying any caller of qemuProcessBeginStopJob is
supposed to call qemuProcessStop to clear beingDestroyed. But not every
caller really does so because they first call qemuProcessBeginStopJob
and then check whether a domain is still running. If not the
qemuProcessStop call is skipped leaving beingDestroyed=true. In case of
a persistent domain this may block incoming migrations of such domain as
the migration code would think the domain died unexpectedly (even though
it's still running).
The qemuProcessBeginStopJob function is a wrapper around
virDomainObjBeginJob, but virDomainObjEndJob was used directly for
cleanup. This patch introduces a new qemuProcessEndStopJob wrapper
around virDomainObjEndJob to properly undo everything
qemuProcessBeginStopJob did.
https://issues.redhat.com/browse/RHEL-43309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Thu, 11 Jul 2024 07:32:40 +0000 (09:32 +0200)]
virt-host-validate: Drop extra "PASS"
If virt-host-validate is ran on a SEV-SNP capable machine, an
extra "PASS" is printed out. This is because
virHostValidateAMDSev() prints "PASS" and then returns 1
(indicating success) which in turn makes the caller
(virHostValidateSecureGuests()) print "PASS" again. Just drop the
extra printing in the caller and let virHostValidateAMDSev() do
all the printing.
Fixes: 1a8f646f291775d2423ce4e4df62ad69f06ab827
Resolves: https://issues.redhat.com/browse/RHEL-46868 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ján Tomko [Thu, 4 Jul 2024 13:54:27 +0000 (15:54 +0200)]
tests: qemuxmlconf: adjust test case to new virtiofsd
Now that we have a fake virtiofsd json descriptor in our vhost-user
test data, we can remove the explicitly specified binary and our
mocking will ensure this test won't be affected by the host state.
Also remove the locking options, since they were never supported
by the Rust version of virtiofsd.
Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of now, libvirt supports few essential stats as
part of virDomainGetJobStats for Live Migration such
as memory transferred, dirty rate, number of iteration
etc. Currently it does not have support for the vfio
stats returned via QEMU. This patch adds support for that.
Signed-off-by: Kshitij Jha <kshitij.jha@nutanix.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adam Julis [Tue, 9 Jul 2024 15:23:31 +0000 (17:23 +0200)]
network: allow "modify" option for DNS-Txt records
The "modify" command allows to replace an existing record (its
text value). The primary key is the name of the record. If
duplicity or missing record detected, throw error.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-text record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639 Signed-off-by: Adam Julis <ajulis@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adam Julis [Tue, 9 Jul 2024 15:23:18 +0000 (17:23 +0200)]
network: allow "modify" option for DNS-Srv records
The "modify" command allows to replace an existing Srv record
(some of its elements respectively: port, priority and weight).
The primary key used to choose the modify record is the remaining
parameters, only one of them is required. Not using some of these
parameters may cause duplicate records and error message. This
logic is there because of the previous implementation (Add and
Delete options) in the function.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Srv record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639 Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adam Julis [Tue, 9 Jul 2024 15:23:02 +0000 (17:23 +0200)]
network: allow "modify" option for DNS hostname
The "modify" command allows you to replace an existing record
(its hostname, sub-elements). IP address acts as the primary key.
If it is not found, the attempt ends with an error message. If
the XML contains a duplicate address, it will select the last
one.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Host record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639 Signed-off-by: Adam Julis <ajulis@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When generating paths for a domain specific AppArmor profile each
path undergoes a validation where it's matched against an array
of well known prefixes (among other things). Now, for
OVMF/AAVMF/... images we have a list and some entries have
comments to which type of image the entry belongs to. For
instance:
"/usr/share/OVMF/", /* for OVMF images */
"/usr/share/AAVMF/", /* for AAVMF images */
But these comments are pretty useless. The path itself already
gives away the image type. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This commit removes the redundant call to qemuSecurityGetNested() in
qemuStateInitialize(). In qemuSecurityGetModel(), the first security manager
in the stack is already used by default, so this change helps to
simplify the code.
Signed-off-by: hongmianquan <hongmianquan@bytedance.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
security_manager: Ensure top lock is acquired before nested locks
Fix libvirtd hang since fork() was called while another thread had
security manager locked.
We have the stack security driver, which internally manages other security drivers,
just call them "top" and "nested".
We call virSecurityStackPreFork() to lock the top one, and it also locks
and then unlocks the nested drivers prior to fork. Then in qemuSecurityPostFork(),
it unlocks the top one, but not the nested ones. Thus, if one of the nested
drivers ("dac" or "selinux") is still locked, it will cause a deadlock. If we always
surround nested locks with top lock, it is always secure. Because we have got top lock
before fork child libvirtd.
However, it is not always the case in the current code, We discovered this case:
the nested list obtained through the qemuSecurityGetNested() will be locked directly
for subsequent use, such as in virQEMUDriverCreateCapabilities(), where the nested list
is locked using qemuSecurityGetDOI, but the top one is not locked beforehand.
In this commit, we ensure that the top lock is acquired before the nested lock,
so during fork, it's not possible for another task to acquire the nested lock.
qemuDomainChangeNet: check virtio options for non-virtio models
In a domain created with an interface with a <driver> subelement,
the device contains a non-NULL virDomainVirtioOptions struct, even
for non-virtio NIC models. The subelement need not be present again
after libvirt restarts, or when the interface is passed to clients.
When clients such as virsh domif-setlink put back the modified
interface XML, the new device's virtio attribute is NULL. This may
fail the equality checks for virtio options in qemuDomainChangeNet,
depending on whether libvird was restarted since define or not.
This patch modifies the check for non-virtio models, to ignore olddev
value of virtio (assumed valid), and to allow either NULL or a struct
with all values ABSENT in the new virtio options.
Signed-off-by: Miroslav Los <mirlos@cisco.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmx: Do not require all ID data for VMWare Distributed Switch
Similarly to commit 2482801608b8 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
projects / thirdparty / libvirt.git / log
