Michael Pratt [Sat, 27 May 2023 21:11:47 +0000 (17:11 -0400)]
prereq-build: do not replace binaries with symlinks
Some programs, like bash and patch, are checked by prereq stage
and have a symlink installed, but then is later built from source.
Now that the prereq-build checks are not successful
just by finding the file alone, it is possible for
a new symlink to overwrite the installed binary.
If a normal file is found in staging_dir/host/bin,
let the check look for the associated stampfile, and if found,
skip creation of a symlink and exit successfully.
Suggested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Michael Pratt <mcpratt@pm.me>
The return "exit 1" was intentional and actually just
makes the symlink checks much more strict.
This new level of strictness added to the checks revealed
what was a confusing regression with prereq stage that
already existed but was not presenting itself
because of the simple way that checks used to be done before.
Either way, reverting to "exit 0" was a nice workaround
until the true root cause was discovered, so as to not interfere
with others' pull requests and builds in the meantime.
It turns out that this problem was the inconsistent value of $PATH
between different commands within the SetupHostCommand recipe,
now fixed in the parent commit, using the variable created
in the parent of the parent commit.
Ref: f75204036c ("prereq-build: allow host command symlinks to update") Signed-off-by: Michael Pratt <mcpratt@pm.me>
Michael Pratt [Thu, 25 May 2023 06:31:52 +0000 (02:31 -0400)]
prereq-build: fix inconsistent value of $PATH
In the recipe SetupHostCommand for checking
and creating symlinks, $PATH was only overridden
for one of several commands.
This causes the symlinks to be included
in the paths to pick a program from
when the check was repeated, because
staging_dir/host/bin was included in $PATH,
but only *sometimes*.
When the check ran again, the command succeded
with a $PATH including the symlink,
(eval "$$$$$$$$cmd")
while the path to the program was evaluated
with a $PATH NOT including the symlink,
(bin=...)
causing the symlink to be relinked incorrectly,
instead of passing as exactly the same.
Coincidentally, this was only a problem
if the symlink targeted the alternative
program with a different name.
By overriding the value of $PATH at the invocation of Make,
it will apply to the entire environment of the checks.
Thus board-prpl_haze.qcn9074` was extracted from `bus=...qmi-board-id=164.bin`
file and `board-prpl_haze.ipq8074` from `bus=...qmi-board-id=660.bin` file.
- ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
- Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
- 1x M.2 B-key socket with PCIe 3.0
- 1x USB 3.0 port
- UART 4-pin 3V3(arrow),RX,TX,GND (115200 8N1)
- Reset and WPS buttons
Flashing instructions:
1. From U-Boot boot OpenWrt using initramfs image:
* SFP feature not implemented/tested
* M.2 feature not implemented/tested
* Bluetooth feature not implemented/tested
* 6GHz wireless should be working, but not tested
* MAC address assigments for LAN interfaces
Petr Štetiar [Mon, 29 May 2023 17:27:15 +0000 (19:27 +0200)]
qca-nss-dp: fix oops in nss_dp_probe
Currently kernel crashes when of_phy_connect has issues:
Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000308
...
pc : phy_attached_print+0x28/0x1b0
lr : phy_attached_info+0x14/0x20
...
Call trace:
phy_attached_print+0x28/0x1b0
phy_attached_info+0x14/0x20
nss_dp_adjust_link+0x544/0x6c4 [qca_nss_dp]
of_phy_connect returns either pointer or NULL, so can't be checked with
IS_ERR macro.
Felix Fietkau [Wed, 24 May 2023 08:21:23 +0000 (10:21 +0200)]
libubox: update to the latest version
b09b316aeaf6 blobmsg: add blobmsg_parse_attr function eac92a4d5d82 blobmsg: add blobmsg_parse_array_attr ef5e8e38bd38 usock: fix poll return code check 6fc29d1c4292 jshn.sh: Add pretty-printing to json_dump 5893cf78da40 blobmsg: Don't do at run-time what can be done at compile-time 362951a2d96e uloop: fix uloop_run_timeout 75a3b870cace uloop: add support for integrating with a different event loop
Felix Fietkau [Sun, 4 Jun 2023 14:54:19 +0000 (16:54 +0200)]
unetd: update to the latest version
412d03012f13 network: prevent adding endpoint routes for addresses on the network faaf9cee6ef4 utils: fix ipv4 checksum issue 0e1c2fad3540 pex-msg: fix memory leak on fread fail in pex_msg_update_request_init 51be0ed659d0 host: fix crash parsing gateway when no endpoint is specified ca17601dc24e wg-linux: add support for splitting netlink messages for allowed ips 7d3986b7a5a2 wg-linux: increase default messages size
Robert Marko [Sat, 3 Jun 2023 16:08:03 +0000 (18:08 +0200)]
ipq807x: switch to kernel 6.1
Now that 6.1 kernel is working fine on ipq807x , lets switch to 6.1 as the
default kernel as its increasingly hard to keep backporting upstreamed
changes to 5.15.
Tianling Shen [Thu, 1 Jun 2023 07:22:26 +0000 (15:22 +0800)]
openssl: fix uci config for built-in engines
Built-in engine configs are added in libopenssl-conf/install stage
already, postinst/add_engine_config is just duplicating them, and
due to the lack of `config` header it results a broken uci config:
> uci: Parse error (invalid command) at line 3, byte 0
Marek Behún [Wed, 12 Apr 2023 11:01:25 +0000 (13:01 +0200)]
kernel: Backport mvneta crash fix to 5.15
Backport Russell King's series [1]
net: mvneta: reduce size of TSO header allocation
to pending-5.15 to fix random crashes on Turris Omnia.
This also backports two patches that are dependencies to this series:
net: mvneta: Delete unused variable
net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
Robert Marko [Fri, 2 Jun 2023 10:27:19 +0000 (12:27 +0200)]
generic: b53: rename exported symbols to avoid upstream conflict
Upstream DSA driver is exporting symbols with the same name as our
downstream swconfig driver, so lets rename the downstream symbols to make
them unique and avoid the conflict on 6.1 kernel.
Without this change, building 6.1 with kmod-switch-bcm53xx would conflict
with the B53 DSA driver and CI would fail.
Tony Ambardar [Mon, 17 May 2021 18:57:40 +0000 (11:57 -0700)]
kselftests-bpf: add kernel BPF tests
Build and package kernel self-tests used for BPF testing, program and JIT
development. This package, together with the existing 'kmod-bpf-test', was
extensively used for past upstream Linux JIT submissions [1].
Currently this includes only 'test_verifier'; building 'test_progs' will
fail due to known endian limitations with bpftool skeletons.
Tony Ambardar [Fri, 26 May 2023 08:41:18 +0000 (01:41 -0700)]
base-files: enable BPF JIT kallsyms by default
Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf.
For privileged users, this exports addresses of JIT-compiled programs to
appear in /proc/kallsyms when present, allowing their use for debugging
and in traces.
Mathew McBride [Wed, 5 Oct 2022 01:40:22 +0000 (12:40 +1100)]
kernel: kmod-amazon-ena: move to top level netdevices
The Amazon ENA network devices are also used on the
AWS Arm (Graviton) instance types, so move it from
the x86-only module file to the top level netdevices.
Mathew McBride [Mon, 13 Feb 2023 06:51:26 +0000 (06:51 +0000)]
armvirt: 64: disable CONFIG_SMC91X
The SMC91X family is a ISA-age Ethernet controller.
I'm not particularly sure what it's doing in armvirt/64,
as it's unlikely there is a QEMU or real hardware configuration
that exists with it.
armvirt: config changes required for framebuffer console
These Kconfig options are required to get a screen console
working with the VMware Fusion ARM (Apple Silicon) preview.
They are likely to be the same for other Arm standard
"desktop" hardware that may emerge.
armvirt: 64: add support for other SystemReady-compatible vendors
These changes are to support other vendors that have SystemReady/EFI
support, including:
* Marvell Armada
** (This is speculative as I don't have a machine of my own to test)
* Amazon Graviton (tested bare-metal and virtualized instances)
* VMware (Fusion for ARM Mac preview)
* NXP/Freescale (Layerscape series not already selected)
* HiSilicon
* Allwinner/sunxi
* Rockchip (untested, options taken from arm64 defconfig)
To give an idea of the hardware certified for SystemReady,
see
https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir
and
https://www.arm.com/architecture/system-architectures/systemready-certification-program/es
Other vendors that _should_ work include Marvell Octeon 10
and Ampere. I understand these systems should work
"out of the box" in ACPI mode but may require other drivers
(e.g PCIe NICs and storage controllers).
Mathew McBride [Fri, 2 Jun 2023 04:14:14 +0000 (04:14 +0000)]
armvirt: add SFP support patches for NXP Layerscape DPAA2 platforms
This series resolves a long term issue with Phylink and SFPs on
DPAA2 hardware (LS1088,LS2088,LX2160) where a locking problem
prevented the system from rebooting. Patches solving this
issue existed prior to 6.2 but were not accepted upstream.
See the original series on patchwork:
https://patchwork.kernel.org/project/netdevbpf/cover/20221129141221.872653-1-vladimir.oltean@nxp.com/
And this thread on the Traverse forum:
https://forum.traverse.com.au/t/reboot-command-regression-from-5-10-to-5-15-kernel/133/12
Mathew McBride [Tue, 1 Jun 2021 01:48:25 +0000 (01:48 +0000)]
build: use 128MiB as the boot/kernel partition size on armvirt target
The nominal partition type for EFI boot partitions is FAT32,
which has a minimum size of 32MiB on a 512-byte-sector block device.
To ensure that the boot partition is created as FAT32 set a size
well above this minimum.
A useful discussion about EFI partition sizes can be found here:
https://superuser.com/questions/1310927/what-is-the-absolute-minimum-size-a-uefi-system-partition-can-be
I have found 128MiB works pretty consistently across both
tools (mkfs.fat) and firmwares (EDKII)
scripts: gen_image_generic: allow the partition types to be set
The use case for this is to set the kernel partition as the
EFI system partition. Versions of U-Boot with the
EFI boot manager (eficonfig and efidebug commands) will
store their boot order data on the ESP.
Mathew McBride [Wed, 19 Jan 2022 03:24:45 +0000 (03:24 +0000)]
armvirt: update README with new image names
The introduction of EFI support has changed how armvirt
images are generated. The kernel and filesystem binaries
can still be used as before with QEMU directly.
armvirt: disable LD dead code elimination on ARM32
This interferes with the generation of the EFI stub section for
ARM32. As this target is not size constrained, disable the dead code
data elimination hack.
Hauke Mehrtens [Tue, 30 May 2023 18:21:43 +0000 (20:21 +0200)]
kernel: Set CONFIG_FRAME_WARN depending on target
This set the CONFIG_FRAME_WARN option depending on some target settings.
It will use the default from the upstream kernel and not the hard coded
value of 1024 now.
Klaus Kudielka [Sat, 26 Feb 2022 08:37:26 +0000 (09:37 +0100)]
mvebu: stop building omnia-medkit
Since August 2022, users of very old Turris Omnias have been
encouraged to update U-Boot before OpenWrt installation [1].
The omnia-medkit (only useful for installation with
U-Boot 2015.10-rc2) is not needed anymore.
Linus Walleij [Wed, 31 May 2023 21:21:08 +0000 (23:21 +0200)]
gemini: Bump to kernel v6.1
This bumps the Gemini kernel to use v6.1. While there is no
reason to stay with v5.15, I personally use newer upstream
kernels constantly and they are tested and work well. OpenWrt's
6.1 needs more time until it can be switched.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Linus Walleij [Wed, 31 May 2023 21:21:05 +0000 (23:21 +0200)]
gemini: Add kernel v6.1 patches
This adds a bunch of patches for the v6.1 Gemini kernel.
For v5.15 this was down to a single upstream patch, but for
kernel v6.2 I reworked the USB code for FOTG210, so instead of
carrying over the half-baked and incomplete patch from v5.15
I just backported all the v6.2 patches, 31 in total, as it
creates full device USB mode for e.g. D-Link DNS-313.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Linus Walleij [Wed, 31 May 2023 21:21:07 +0000 (23:21 +0200)]
kernel: Package the new FOTG210 module properly
When using the Gemini, we apply patches that create a single
module that support both host and device mode these days.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(move module to gemini target, keep both 6.1+2-ish + 5.15 module
CONFIG and files around until 5.15 is dropped) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
CI: label-kernel: support compile testing kernel version and all target
Add support to label-kernel for compiling testing kernel version and
check patches. To trigger this special build appent :testing to the
normal label.
Example:
- ci:kernel:ipq806x:generic:testing
Test will fail if the requested target doesn't have a defined kernel
testing version.
Also add support for testing all target and subtarget. To trigger this
some special pattern are added:
- ci:kernel:all:all
Trigger test for all target and subtarget
- ci:kernel:all:first
Trigger test for all target and the first subtarget in alphabetical
order for the target.
With these special case :testing can also be used and every target and
subtarget that supports kernel testing version will be selected:
- ci:kernel:all:all:testing
Trigger test for all target and subtarget that have a kernel testing
version defined.
- ci:kernel:all:first:testing
Trigger test for all target and the first subtarget in alphabetical
order for the target that, if they have a kernel testing version
defined.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Tue, 30 May 2023 21:38:56 +0000 (23:38 +0200)]
ipq807x: 6.1: fix I/O WRITE_ZEROES errors on some eMMC devices
Linux 5.19 added a feature where if there is TRIM support being advertised
on eMMC kernel will use TRIM to offload erasing to zero.
However, like always there are eMMC IC-s that advertise TRIM and kind of
work but trying to use TRIM for offloading will cause I/O errors like:
[ 18.085950] I/O error, dev loop0, sector 596 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 2
So, lets utilize the kernel MMC quirks DB to disable TRIM for eMMC models
that are known to cause this.
This will fix the WRITE_ZEROES error on:
Qnap 301W which uses Micron MTFC4GACAJCN-1M
Zyxel NBG7815 which uses Kingston EMMC04G-M627
Tested-By: Enrico Mioso <mrkiko.rs@gmail.com> # NBG7815 Signed-off-by: Robert Marko <robimarko@gmail.com>
Tianling Shen [Tue, 30 May 2023 04:59:07 +0000 (12:59 +0800)]
rockchip: add Orange Pi R1 Plus LTS support
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
identical to OrangePi R1 Plus.
Tianling Shen [Tue, 30 May 2023 04:59:07 +0000 (12:59 +0800)]
rockchip: add Orange Pi R1 Plus support
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.
Note: booting from SPI is currently unsupported, you have to install
the image on a SD card.
Hauke Mehrtens [Tue, 30 May 2023 20:00:19 +0000 (22:00 +0200)]
kernel: Make kmod-phylink depend on kmod-libphy
The CONFIG_PHYLINK Kconfig option in the kernel selects CONFIG_LIBPHY.
Add this dependency to fix the all kernel modules build on MIPS malta
and armvirt with kernel 6.1.
With kernel 5.15 mod-phylink and kmod-sfp are empty packages because
no OpenWrt kmod is selecting a module which needs sfp or phylink
support.
This new option (default N) will generate prompts building with OpenWrt
configs that set CONFIG_KERNEL_DYNAMIC_DEBUG=y. Fix this by adding the
disabled option to the generic config.
kernel: fix wrong detection of Linux-Testing-Version in makefile DUMP
When the split was done, the case for testing kernel version wasn't
handled and only the to-be-compiled kernel version details files was
included. This cause the kernel Linux-Testing-Version output from
makefile target DUMP to report only the kernel version without the minor
version (example 6.1 instead of 6.1.29).
This value is expected with the full kernel version and this cause the
dump-target-info.pl script to not correctly identify if a target have a
testing kernel for the kernels calls.
Fix this regression by correctly including the kernel details files if
the target declare support for a testing kernel version.
Fixes: 0765466a42f4 ("kernel: split kernel version to dedicated files") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Jeffery To [Wed, 31 May 2023 13:58:34 +0000 (21:58 +0800)]
build: export GIT_CEILING_DIRECTORIES for package builds
A package may run git as part of its build process, and if the package
source code is not from a git checkout, then git may traverse up the
directory tree to find buildroot's repository directory (.git).
For instance, Poetry Core, a Python build backend, will read the
contents of .gitignore for paths to exclude when creating a Python
package. If it finds buildroot's .gitignore file, then Poetry Core will
exclude all of the package's files[1].
This exports GIT_CEILING_DIRECTORIES for both package and host builds so
that git will not traverse beyond $(BUILD_DIR)/$(BUILD_DIR_HOST).
Petr Štetiar [Fri, 26 May 2023 09:41:18 +0000 (11:41 +0200)]
ci: build: verify downloaded toolchain tarball
CDNs are known to ship outdated or corrupted files, if it unpacks
correctly, it necessarily doesn't mean, that we're using the desired
content. So lets fix it by checking the tarball as well.
I'm adding GPG checking explicitly, its not needed, but just double
checking, that everything is working as expected on build
infrastructure.
Linus Walleij [Tue, 23 May 2023 22:03:12 +0000 (00:03 +0200)]
kernel: disable new v6.1 DRM option
Not many platforms use the DRM configs but Gemini use it
so make sure to disable all new kernel v6.1 features that
we do not want to get prompted about.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebased]
Petr Štetiar [Wed, 29 Mar 2023 08:57:17 +0000 (10:57 +0200)]
netifd: update to version 2023-05-31
Contains following changes:
* bridge: bridge_dump_info: add dumping of bridge attributes
* bridge: make it more clear why the config was applied
* cmake: fix build by reordering the cflags definitions
* treewide: fix multiple compiler warnings
Add support for getting ccache cache from S3.
ccache is archieved in a tar and downloaded from S3 Cloud Storage.
For push events, ccache is then uplodaed back to S3 to refresh and have
a ccache cache always fresh.
An additional workflow is added to upload files to an S3 Cloud Storage
from artifacts uplodaed to github. The minio tool is used to upload
files to S3.
If the ccache can't be downloaded from s3, we fallback to github cache
system.
Also limit s3 upload to the openwrt repository since external fork won't
have (obviously) the required secrtes to upload data to the S3 Cloud
Storage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: build: limit cache save/delete only on push events
Limit ccache cache save/delete only on push events. Saving ccache
cache for pull request will result in bloat and refreshing ccache is not
possible due to security measure on enforcing read permission on
pull_request events.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CCache cache is currently broken due to a funny bug in ccache compiler
type detection. It seems ccache compiler type detection is very fragile
and with the use of external toolchain doesn't correctly detect the
type.
The type detected is set to other instead of gcc resulting in ccache
complaining for unsupported compiler options.
To handle this problem, force the compiler type to gcc to make ccache
correctly work and speedup compilation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: build: add option to define custom ccache cache type
Add new input to define custom ccache cache type. This is useful to use
a different ccache cache for some special workflow that may do more test
than simple kernel compilation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add option to disable use of ccache. This can be useful for some
sensible test that should not use ccache as they can cause side effects
of any sort. (example Coverity Scan)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: build: add job to remove previous ccache cache if already exist
Github Actions cache doesn't permit to overwrite cache if it does
already exist. As a trick to refresh and have fresh ccache pool,
delete the ccache cache if it does exist with the help of Github REST
API. An additional permission is needed to access this API. Add this
permittion to each user of the build workflow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: build: split cache ccache in separate restore and save jobs
Split caching ccache in separate restore and save jobs to always refresh
the ccache across different runs. Currently if a key is restored, cache
is not saved resulting in a less useful ccache that benefits from
multiple runs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CI: build: drop redundant generate ccache hash job
Drop redundant generare ccache hash job as that can be done by
integrated github expressions to generate an hash.
The only change is that the integrated way generate a sha256 hash
instead of an md5 sum.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Linhui Liu [Sat, 27 May 2023 05:51:10 +0000 (13:51 +0800)]
tools/meson: update to 1.1.1
026644099 Bump versions for 1.1.1 release 72f26cd0a azure pipelines: fix branch patterns to support 1.x release branches e619b96ad ci: Don't error out CI if codecov upload fails cf2887d57 ci: Move to the codecov github action f7b0596bd docs: Fix some typos in feature option examples 0d9e46c84 qt: Allow specifying separate tools for qt4/5/6 be89526e7 rust compiler: use better sanity check logging comparable to the clike one c953363a7 meson_exe: print suitable debug information for DLL not found errors 6a7cd1350 llvm: Bump broken micro version for CI 3dbeac046 ci: Don't search for llvm modules with LLVM 16.0.x e17d243aa rust: Also disallow `.` in Rust library target names 630a29f4d rust: Don't allow spaces/dashes in Rust library names b4c669f6e rust: Don't use prefer-dynamic in case of proc-macro Rust dependencies 225719770 mbuild: .pdb files are created only when debug symbols are enabled e6cc0f2d8 minstall: Fix install_subdir() excludes with path separators on Win 4269a2401 rust: Use `isinstance(d, build.StaticLibrary)` instead of comparing the type name string cc481c0da rust: Link staticlib/cdylib link targets like link targets from any other language 0d2c62529 rust: Don't prefer dynamic linking of Rust libraries for cdylibs 1a10b8f77 rust: Use the corresponding rustc version when clippy-driver is chosen as Rust compiler 6dce28185 rust: Don't pass dependency compile arguments to the compiler b781d1261 Fix paths of Fortran order dependencies Fixes #11047 5886499f8 Fix building python extensions on win-arm64 8014827d0 Python module: emit warning for debug buildtypes with MSVC and no debug Python a53dcd6f6 Fix unit test that hardcoded `/` and hence broke on Windows 795e39b3a Fix `ERROR: no toolchain found` when run from unittests 35d1def39 Add Cython to Windows CI jobs on Azure a5ef21302 Use release buildtype in Cython tests, and skip unless ninja backend 8bbf6a5df fix regression in precomputing CMAKE_SIZEOF_VOID_P 26b73afba wrap: Always pass posix paths to patch 6696a754a Don't use dyndep scanner when preprocessing 22163998b Specify c++ 11 flag as code uses c++ 11 features 7c5dc1a79 Fix html coverage report generation when using clang on linux 46e0303c3 yasm: Fix usage of incompatible optimization flags 093ae573b fix python.version() not working in some cases 9bfdae8d7 Add c++23 to the list of C++ standards. 4c72b6da5 select the correct python_command for pyinstaller builds, even on not-Windows 9678aa05f fix data collection with pyinstaller e5928e63d minstall: work around broken environments with missing UIDs 452d1c567 minstall: do not drop privileges if msetup also ran under sudo 960ae14c4 rust: Convert dashes in crate names to underscores cb75ce50d backend/vs: Fix OpenMPSupport 11fe12d09 zsh: fix help / descriptions 307cb2573 ci: properly check `test cases/windows` files 1f1f05b8b ci: rename workflow 08e684499 syntax-highlighting: vim: fix mesonSpaceError de8c4839e packaging: fix options hostArchitectures attribute 560ece485 fix various spelling issues
projects / thirdparty / openwrt.git / log
