Dennis Menschel [Wed, 13 Jun 2018 18:28:15 +0000 (20:28 +0200)]
runqemu-extract-sdk: support tar.xz format
As the format "tar.xz" is included in the IMAGE_TYPES bitbake variable
as defined in meta/classes/image_types.bbclass, it should also be
possible to extract a rootfs that has been built using that format.
Stefan Stanacar [Wed, 13 Jun 2018 19:56:03 +0000 (19:56 +0000)]
default-versions.inc: use weak assignments to allow overwrite
default-versions.inc is included by defaultsetup.conf which in bitbake.conf
is included after local/machine/distro.conf.
If these are hard assignments distros can's overwrite them.
Jeremy Puhlman [Wed, 13 Jun 2018 19:53:43 +0000 (12:53 -0700)]
Multilibize the UPDATERCPN variable
The audit package specifies the following:
UPDATERCPN = "auditd"
However because it is not multilibized, the value "auditd" is used to
search for the package to add the post install script too. In the mutlilib
alternate abi case, that package does not exist. It ends up assigning
the post install script to the lib32-audit-lic package, which
subsequently failes to execute the script due to the initscript it is
trying to turn on is not installed.
Ross Burton [Wed, 13 Jun 2018 11:50:45 +0000 (12:50 +0100)]
meson: only use lists of commands in cross file if required
There's a bug in Meson[1] where it find_program("foo") will fail if foo is
defined in the cross file as a list.
This is causing the Meson build of libdrm to fail, but for this instance we can
work around the problem by only using lists in the cross file if there are
arguments, and just using a string if there are not.
Chen Qi [Wed, 13 Jun 2018 07:58:25 +0000 (15:58 +0800)]
dnf: default to disable systemd units
The services and timers are not useful if a repo is not configured.
In OE, we default to have no repo configured. So we default to disable
these units.
The problem was found by the test_systemd_failed runtime test case.
dnf-makecache.service is found to fail. This is due to lack of repo.
Note that as this service is started by the dnf-makecache.timer, it's
possible that test_systemd_failed passes in case the timer is not started
yet.
Chen Qi [Wed, 13 Jun 2018 07:58:23 +0000 (15:58 +0800)]
watchdog: fix init script for sysvinit
The current init script is installed from source with redhat style.
It does not get configuration from /etc/default/watchdog. We should use
debian style init script.
Write our own script just like what wd_keepalive does.
Also, in the init script, we check the existence of /dev/watchdog to
determine whether to start the daemon or not.
Chen Qi [Wed, 13 Jun 2018 07:58:20 +0000 (15:58 +0800)]
watchdog: remove the useless watchdog-conf.patch
This patch modifies watchdog.conf file. But this file is deliberately
deleted in do_install. The current mechanism in OE is to use another
recipe watchdog-conf to handle watchdog configuration. So the patch
is really useless.
When generating the extended SDK, there is a copy step where this class
goes through the layers and other stuff that have been copied to
generate the SDK. The corebase; ie. the folder that contains the core
layer 'meta' is treated in a special way. Unfortunately in our tree, we
have:
In populate_sdk_ext's copy_buildsystem, the heuristic to determine which
element of the list returned by copy_bitbake_and_layers is corebase is
fooled by such layout.
In copy_bitbake_and_layers, corebase is already handled specifically and
reliably, so we should let that function tell us which folder is
corebase instead of trying to determine it.
To do so, change the return type of copy_bitbake_and_layers to a tuple
that contains (corebase, copied_layers). It also simplifies the code on
the caller side.
Richard Purdie [Sat, 16 Jun 2018 11:36:09 +0000 (12:36 +0100)]
sqlite3: Merge/simplify CFLAGS
An earlier version of a change was merged from S. Lockwood-Childs
<sjl@vctlabs.com> which made the CFLAGS consistent across native,
nativesdk and target cases. This syncs with a later verison of the
patch to remove duplicate CFLAGS settings and simplify the recipe.
Alex Kiernan [Sat, 16 Jun 2018 09:28:53 +0000 (09:28 +0000)]
kernel-fitimage: Add DTBO support for configurations
When generating overlay DTB configuration sections, U-Boot doesn't want
the kernel specified again as we already have that in our base DTB. Add
support for this to allow bootm to process overlay configuration sections.
Alex Kiernan [Sat, 16 Jun 2018 09:28:52 +0000 (09:28 +0000)]
kernel-fitimage: Allow setting of DTB/DTBO relocation address
Introduce UBOOT_DTB_LOADADDRESS and UBOOT_DTBO_LOADADDRESS so that you
can set where U-Boot loads full and overlay DTBs. This is required when
using bootm's overlay support to construct the final DTB.
Mark Hatle [Mon, 14 May 2018 14:21:39 +0000 (10:21 -0400)]
bitbake: runqueue.py: Initial implementation of per task process limits
On high core machines, in do_fetch, it is possible to DDoS your own machine.
A method to limit any arbitrary task type to a certain number of simultaneous
threads is needed. (Similar to how BB_NUMBER_THREADS works in the general
case.) The format of this new limitation is:
do_fetch[number_threads] = "2"
This should be set globally. If it is set in individual recipes it could
result in unpredictable behavior.
Note: a value for number_threads > BB_NUMBER_THREADS will have no effect.
Mark Hatle [Mon, 14 May 2018 14:21:38 +0000 (10:21 -0400)]
bitbake: runqueue.py: Minor cleanup for RunQueueStats and users
The RunQueueStats:taskCompleted and RunQueueStats:taskSkipped can take
multiple arguments. However, nowehere in bitbake are multiple arguments used.
Change this to match the behavior of the other APIs where it needs to be
called once for each task.
Additionally, these two functions were usually called in tandem, however in
the wrong order. It really doesn't matter as there is no specific preemption
point between the calls. But the taskSkipped should be called first to
increment the 'active' count, and then taskCompleted called to decrement it.
Andre McCurdy [Tue, 5 Jun 2018 19:13:50 +0000 (12:13 -0700)]
bitbake: fetch2: unify the way fetchers determine DL_DIR and FETCHCMD
Currently there is quite some variation between the fetchers in terms
of how they determine the subdirectory within DL_DIR and the base
fetch command to run. Some rely on variables being set externally
(e.g. from bitbake.conf in oe-core), some respect these external
variables but provide fallback defaults and some use only hardcoded
internal values. Try to unify the approach used across the various
fetchers.
Ross Burton [Mon, 11 Jun 2018 20:38:16 +0000 (21:38 +0100)]
alsa-tools: rewrite packaging
alsa-tools is actually a collection of 20 separate tools, each with their own
configure scripts. The dependencies are varied, old, and estoric (FLTK, GTK+ 1, 2,
and 3, PyGTK 2, Qt3).
Instead of maintaining patches to try and pick a subset that builds, use
PACKAGECONFIG and some magic to build what the user requests.
By default we build all the tools which have no dependencies, and the tools
which need GTK+ 2 or GTK+ 3 if the relevant DISTRO_FEATURES are enabled.
Add a patch to fix the build of ld10k1 with musl.
The ncurses build dependency doesn't seem to be checked for, so remove that.
Andre McCurdy [Thu, 7 Jun 2018 18:48:39 +0000 (11:48 -0700)]
openssh: only create sshd host keys which have been enabled
Previously sshd_check_keys would create a full set of all possible
sshd host keys, even if sshd_config has been set to only enable
certain key types.
Update sshd_check_keys to only create keys which have been enabled in
sshd_config (with a fallback to creating a full set of key types if
no HostKey options are defined, as before).
Andre McCurdy [Thu, 7 Jun 2018 18:48:37 +0000 (11:48 -0700)]
openssh: minor indent cleanup for sshd init script
The openssh sshd init script contains a mix of indent styles, mostly
inherited from the Debian script from which it is derived. Leave the
indent from Debian as-is, but for lines which are OE specific (e.g.
where Debian's log_daemon_msg helper has been replaced with echo)
make the indent consistent with surrounding lines.
Andre McCurdy [Thu, 7 Jun 2018 18:48:36 +0000 (11:48 -0700)]
openssh: drop RCONFLICTS for openssh-keygen
The "ssh-keygen" package no longer seems to be provided by any recipe
in oe-core or meta-oe, so there's no clear reason for the
openssh-keygen package to conflict with it.
Andre McCurdy [Thu, 7 Jun 2018 18:48:34 +0000 (11:48 -0700)]
openssh: stop adding -D__FILE_OFFSET_BITS=64 to CFLAGS
Openssh takes care of enabling large-file support automatically via
the AC_SYS_LARGEFILE in the configure.ac, so additional help from the
recipe is not required.
Even if it were once required, defining __FILE_OFFSET_BITS (ie with
double leading underscores) looks like a typo and probably never had
any effect anyway?
Kai Kang [Thu, 14 Jun 2018 06:18:03 +0000 (14:18 +0800)]
goarch.bbclass: set SECURITY_CFLAGS for mips64
When include conf/distro/include/security_flags.inc, NOPIE flags are
still required for mips64 target builds. Otherwise it fails to build
packages such as glide which inherit go.bbclass:
| .../tmp-glibc/work/mips64-wrs-linux/glide/0.13.1-r0/recipe-sysroot-native/usr/bin/mips64-wrs-linux/../../libexec/mips64-wrs-linux/
| gcc/mips64-wrs-linux/7.3.0/ld: .../tmp-glibc/work/mips64-wrs-linux/glide/0.13.1-r0/go-tmp/go-link-518447869/go.o:
| relocation r_mips_26 against `a local symbol' can not be used when making a shared object; recompile with -fPIC`
Use override 'mipsarch' to set SECURITY_CFLAGS for both mips and mips64.
Richard Purdie [Fri, 15 Jun 2018 10:10:31 +0000 (11:10 +0100)]
gcc-8: enable build-id in gcc-cross-initial
Apply patch from Taras Kondratiuk <takondra@cisco.com> to gcc 8.x too.
Normal gcc-cross has build-id feature enabled by default, so most of
target binaries has build-id. But libc (glibc, musl) doesn't have
build-id, because it is built with gcc-cross-initial.
Build-id is a useful feature, so enable it for gcc-cross-initial too.
Normal gcc-cross has build-id feature enabled by default, so most of
target binaries has build-id. But libc (glibc, musl) doesn't have
build-id, because it is built with gcc-cross-initial.
Build-id is a useful feature, so enable it for gcc-cross-initial too.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SystemD 237 implements a stricted PIDfile handling that breaks several
daemons [1].
Change the way we start xinetd, mimicing other distros [2].
Fixes:
root@qt5122:~# journalctl -u xinetd
-- Logs begin at Fri 2018-05-25 14:33:29 UTC, end at Mon 2018-06-11 07:33:08 UTC. --
May 25 14:33:31 qt5122 systemd[1]: Starting Xinetd A Powerful Replacement For Inetd...
May 25 14:33:31 qt5122 systemd[1]: xinetd.service: Permission denied while opening PID file or unsafe symlink chain: /var/run/xinetd.pid
Jun 11 07:27:24 qt5122 systemd[1]: xinetd.service: Start operation timed out. Terminating.
Jun 11 07:27:24 qt5122 systemd[1]: xinetd.service: Failed with result 'timeout'.
Jun 11 07:27:24 qt5122 systemd[1]: Failed to start Xinetd A Powerful Replacement For Inetd.
Jun 11 07:31:38 qt5122 systemd[1]: Starting Xinetd A Powerful Replacement For Inetd...
Jun 11 07:31:38 qt5122 systemd[1]: xinetd.service: Permission denied while opening PID file or unsafe symlink chain: /var/run/xinetd.pid
Jun 11 07:33:08 qt5122 systemd[1]: xinetd.service: Start operation timed out. Terminating.
Jun 11 07:33:08 qt5122 systemd[1]: xinetd.service: Failed with result 'timeout'.
Jun 11 07:33:08 qt5122 systemd[1]: Failed to start Xinetd A Powerful Replacement For Inetd.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Thu, 7 Jun 2018 09:01:59 +0000 (02:01 -0700)]
manpages.bbclass: Update RDEPENDS and post install scripts
If a package installs manual files, it should update manual index cache
after its installation. Add package 'man-db' to RDEPENDS which contains
command 'mandb' to update the cache. And do the update in the post
install scripts.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 25 May 2018 00:14:19 +0000 (17:14 -0700)]
cpio: fix CVE-2016-2037
"The cpio_safer_name_suffix function in util.c in cpio 2.11 allows
remote attackers to cause a denial of service (out-of-bounds write)
via a crafted cpio file."
https://nvd.nist.gov/vuln/detail/CVE-2016-2037
Note that there appear to be two versions of this fix. The original
patch posted to the bug-cpio mailing list [1] is used by Debian [2],
but apparently causes regression [3]. The patch accepted to the
upstream git repo [4] seems to be the most complete fix.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dan McGregor [Wed, 6 Jun 2018 15:21:19 +0000 (09:21 -0600)]
systemd: allow setting time-epoch to epoch
systemd by default sets the system time at boot to the date of its NEWS
file. It provides the option to change that at build time, and some
projects need to come up at a particular date if no RTC is present.
Provide the option to set the time at boot to the epoch instead of the
date of the NEWS file.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Hong Liu <hongl.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jens Rehsack [Mon, 28 May 2018 18:55:09 +0000 (20:55 +0200)]
cpan_build.bbclass: tell Module::Build the replacement
Instead of patching Module::Build, maybe Module::Build::Tiny and all other
similar tools, use the official way to tell them which is the target perl
on target.
Ross Burton [Wed, 6 Jun 2018 10:20:43 +0000 (11:20 +0100)]
attr/acl: disable make clean
These packages use hand-grown makefiles which don't handle cleans as they can
invoke /usr/bin/gmake directly which may not exist. Until new upstream releases
are made (which have ported to automake) set CLEANBROKEN to work around this.
Mingli Yu [Fri, 15 Jun 2018 08:35:05 +0000 (16:35 +0800)]
boost: Improve reproducibility
Set .file section explicitly for .S files to avoid
the linker introduces the host path in symbols for
object files whose source file is .S
Otherwise, there is a host path in the symbols as
below:
$ readelf --wide --symbols /my-build/boost/1.67.0-r0/boost_1_67_0/x86_64-poky-linux/boost/bin.v2/libs/context/build/aca09349fdb84d131321425f6c3a38ed/libboost_context.so.1.67.0
42: 0000000000000000 0 FILE LOCAL DEFAULT ABS /my-build/boost/1.67.0-r0/boost_1_67_0/x86_64-poky-linux/boost/bin.v2/libs/context/build/aca09349fdb84d131321425f6c3a38ed/asm/make_x86_64_sysv_elf_gas.o
The change "fix hostname conflict with other packages" moved the
hostname util to the list of base_bindir_progs, so do_install_append()
now expects hostname to have been built.
coreutils do_install_append() is shared between target and nativesdk
builds (though not used by native build, see comment) so hostname should
be enabled to build on both of them.
Mingli Yu [Fri, 15 Jun 2018 09:28:01 +0000 (17:28 +0800)]
ltp: set -fomit-frame-pointer explicitly for x86-64
Since ltp contains x86-64 assembler which uses the
frame-pointer register, it will trigger below error
when build ltp with -fno-omit-frame-pointer on
x86-64.
| cve-2015-3290.c: In function 'child_thread':
| cve-2015-3290.c:416:1: error: bp cannot be used in asm here
And there is also some comment as below in the source
file ltp/20180515-r0/git/testcases/cve/cve-2015-3290.c
* Build with -O2. Don't use -fno-omit-frame-pointer.
So explicitly set -fomit-frame-pointer on x86-64 for
compiler to fix the above build error.
tclibc-newlib: Adds a new TCLIBC variant to build with newlib as C library
This patch adds the posibility to build using TCLIBC=newlib.
It allows users to build baremetal applications with the use of a
C library.
Newlib is a lightweight C library meant to be used on embedded systems,
it is meant to be easily portable for new platforms and to provide
basic functionality on them, by design, it provides stubs for some of
these core functions declared as weak, so they can be built correctly
and then linked against some other library which provides specifics
about the platform being used if need be, libgloss takes care of these
in some cases, but it can also be extended, this patch also allows the
user to easily add other libraries to it by adding them to
NEWLIB_EXTENDED for this specific reason.
insane.bbclass: Adds powerpc to elf headers machine dictionary
This patch adds makes it possible to build elf for powerpc by adding
this combination to the elf headers machine dictionary, this can be
useful when trying to build baremetal applications where the TARGET_OS=elf
Newlib is a C library that is intended to be used on embedded systems.
It is a conglomeration of several library parts, all under free software
licenses that make them easily usable on embedded products.
Newlib provides a C library alternative that can run on baremetal, mainly
for resource constrained devices.
Libgloss is the BSP part of the C library, which can be easily modified
to port for new hardware platforms.
Scott Rifenbark [Thu, 14 Jun 2018 17:43:12 +0000 (10:43 -0700)]
sdk-manual: Updated step to install Oxygen
The step describes the installation process and the intial launch
process. No information exists for describing how you launch
Oxygen from outside the install process. I added a note that
tells where the "eclipse" binary is installed and an example
line to invoke it.
Scott Rifenbark [Thu, 7 Jun 2018 22:02:37 +0000 (15:02 -0700)]
sdk-manual: Updated the "Makefile-Based Projects" section.
Expanded this section to contain a figure of the flow and an
example that showcases the ways to override and use SDK
environment and Makefile variables.
Scott Rifenbark [Thu, 7 Jun 2018 22:01:18 +0000 (15:01 -0700)]
sdk-manual: Created a new Makefile flow diagram
The Makefile-Based Projects section was expanded to add a useful
example and figure. Added this figure to the sdk-manual and
mega-manual figures folders.
Updated the Makefile to include the new figure as part of the
tar files for each manual.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
