This fix is already present in f_ecm.c and was never
propagated to f_ncm.c
When creating multiple NCM ethernet devices
on a composite usb gadget device
each MAC address on the HOST side will be identical.
Having the same MAC on different network interfaces is bad.
This fix updates the MAC address inside the
ncm_strings_defs global during the ncm_bind call.
This ensures each device has a unique MAC.
In f_ecm.c ecm_string_defs is updated in the same way.
The defunct MAC assignment in ncm_alloc has been removed.
ADC calibration might fail because of the noise on reference voltage.
To avoid calibration fail, need to meet the following requirement:
ADC reference voltage Noise < 1.8V * 1/2^ENOB
For the case which the ADC reference voltage on board do not meet
the requirement, still load the calibrated values, so ADC can also
work but maybe not that accurate.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Primoz Fiser <primoz.fiser@norik.com> Link: https://patch.msgid.link/20250812-adc-v2-2-0260833f13b8@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a poison is consumed on the guest before the guest receives the host's poison creation msg, a corner case may occur to have poison_handler complete processing earlier than it should to cause the guest to hang waiting for the req_bad_pages reply during a VF FLR, resulting in the VM becoming inaccessible in stress tests.
To fix this issue, this patch refactored the mailbox sequence by seperating the bad_page_work into two parts req_bad_pages_work and handle_bad_pages_work.
Old sequence:
1.Stop data exchange work
2.Guest sends MB_REQ_RAS_BAD_PAGES to host and keep polling for IDH_RAS_BAD_PAGES_READY
3.If the IDH_RAS_BAD_PAGES_READY arrives within timeout limit, re-init the data exchange region for updated bad page info
else timeout with error message
New sequence:
req_bad_pages_work:
1.Stop data exhange work
2.Guest sends MB_REQ_RAS_BAD_PAGES to host
Once Guest receives IDH_RAS_BAD_PAGES_READY event
handle_bad_pages_work:
3.re-init the data exchange region for updated bad page info
HMM assumes that pages have READ permissions by default. Inside
svm_range_validate_and_map, we add READ permissions then add WRITE
permissions if the VMA isn't read-only. This will conflict with regions
that only have PROT_WRITE or have PROT_NONE. When that happens,
svm_range_restore_work will continue to retry, silently, giving the
impression of a hang if pr_debug isn't enabled to show the retries..
If pages don't have READ permissions, simply unmap them and continue. If
they weren't mapped in the first place, this would be a no-op. Since x86
doesn't support write-only, and PROT_NONE doesn't allow reads or writes
anyways, this will allow the svm range validation to continue without
getting stuck in a loop forever on mappings we can't use with HMM.
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL.
So, such kind of amdgpu_bo_va should be updated separately before
amdgpu_vm_handle_moved.
Detecting the monitor for DisplayPort targets is more complicated than
just reading the HPD pin level: it requires reading the DPCD in order to
check what kind of device is attached to the port and whether there is
an actual display attached.
In order to let DRM framework handle such configurations, disable
DRM_BRIDGE_OP_DETECT for dp-connector devices, letting the actual DP
driver perform detection. This still keeps DRM_BRIDGE_OP_HPD enabled, so
it is valid for the bridge to report HPD events.
Currently inside the kernel there are only two targets which list
hpd-gpios for dp-connector devices: arm64/qcom/qcs6490-rb3gen2 and
arm64/qcom/sa8295p-adp. Both should be fine with this change.
The already fixed bug in SDL only affected conditional effects. This
should fix FFB in Forza Horizion 4/5 on Moza Devices as Forza Horizon
flips the constant force direction instead of using negative magnitude
values.
Changing the direction in the effect directly in pidff_upload_effect()
would affect it's value in further operations like comparing to the old
effect and/or just reading the effect values in the user application.
This, in turn, would lead to constant PID_SET_EFFECT spam as the effect
direction would constantly not match the value that's set by the
application.
This way, it's still transparent to any software/API.
Only affects conditional effects now so it's better for it to explicitly
state that in the name. If any HW ever needs fixed direction for other
effects, we'll add more quirks.
In certain scenarios, it is possible for multiple cache flushes to be
requested before the previous one completes. This patch introduces the
cache_flush_lock mutex to serialize these operations and ensure that
any requested cache flushes are completed instead of dropped.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Co-developed-by: Dennis Tsiang <dennis.tsiang@arm.com> Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com> Signed-off-by: Karunika Choo <karunika.choo@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250807162633.3666310-6-karunika.choo@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot is reporting that imon has three problems which result in
hung tasks due to forever holding device lock [1].
First problem is that when usb_rx_callback_intf0() once got -EPROTO error
after ictx->dev_present_intf0 became true, usb_rx_callback_intf0()
resubmits urb after printk(), and resubmitted urb causes
usb_rx_callback_intf0() to again get -EPROTO error. This results in
printk() flooding (RCU stalls).
Alan Stern commented [2] that
In theory it's okay to resubmit _if_ the driver has a robust
error-recovery scheme (such as giving up after some fixed limit on the
number of errors or after some fixed time has elapsed, perhaps with a
time delay to prevent a flood of errors). Most drivers don't bother to
do this; they simply give up right away. This makes them more
vulnerable to short-term noise interference during USB transfers, but in
reality such interference is quite rare. There's nothing really wrong
with giving up right away.
but imon has a poor error-recovery scheme which just retries forever;
this behavior should be fixed.
Since I'm not sure whether it is safe for imon users to give up upon any
error code, this patch takes care of only union of error codes chosen from
modules in drivers/media/rc/ directory which handle -EPROTO error (i.e.
ir_toy, mceusb and igorplugusb).
Second problem is that when usb_rx_callback_intf0() once got -EPROTO error
before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always
resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge
hardware after early callbacks"). Move the ictx->dev_present_intf0 test
introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes
until intf configured") to immediately before imon_incoming_packet(), or
the first problem explained above happens without printk() flooding (i.e.
hung task).
Third problem is that when usb_rx_callback_intf0() is not called for some
reason (e.g. flaky hardware; the reproducer for this problem sometimes
prevents usb_rx_callback_intf0() from being called),
wait_for_completion_interruptible() in send_packet() never returns (i.e.
hung task). As a workaround for such situation, change send_packet() to
wait for completion with timeout of 10 seconds.
Fix field-spanning memcpy warnings in ah6_output() and
ah6_output_done() where extension headers are copied to/from IPv6
address fields, triggering fortify-string warnings about writes beyond
the 16-byte address fields.
memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16)
WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439
The warnings are false positives as the extension headers are
intentionally placed after the IPv6 header in memory. Fix by properly
copying addresses and extension headers separately, and introduce
helper functions to avoid code duplication.
`offset` is a common field name, yet using it triggers a build error due
to the conflict between the uppercased field constant (which becomes
`OFFSET` in this case) containing the bitrange of the field, and the
`OFFSET` constant constaining the offset of the register.
Fix this by adding `_RANGE` the field's range constant to avoid the
name collision.
[acourbot@nvidia.com: fix merge conflict due to switch from `as u32` to
`u32::from`.]
Reported-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20250718-nova-regs-v2-3-7b6a762aa1cd@nvidia.com Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a NULL check before accessing the 'vccqx' pointer to prevent invalid
memory access. This ensures that the function safely handles cases where
'vccq' and 'vccq2' are not initialized, improving the robustness of the
power management code.
Signed-off-by: Alice Chao <alice.chao@mediatek.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20250811131423.3444014-11-peter.wang@mediatek.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Modify the reset sequence to ensure that the device reset pin is set low
before the host is disabled. This change enhances the stability of the
reset process by ensuring the correct order of operations.
Assign power mode userdata settings before transitioning to FASTAUTO
power mode. This ensures that default timeout values are set for various
parameters, enhancing the reliability and performance of the power mode
change process.
Signed-off-by: Alice Chao <alice.chao@mediatek.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20250811131423.3444014-7-peter.wang@mediatek.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Address a failure in switching to PWM mode by ensuring proper
configuration of power modes and adaptation settings. The changes
include checks for SLOW_MODE and adjustments to the desired working mode
and adaptation configuration based on the device's power mode and
hardware version.
Move the configuration of the Auto-Hibern8 (AHIT) timer from the
post-link stage to the 'fixup_dev_quirks' function. This change allows
setting the AHIT based on the vendor requirements:
(a) Samsung: 3.5 ms
(b) Micron: 2 ms
(c) Others: 1 ms
Additionally, the clock gating timer is adjusted based on the AHIT
scale, with a maximum setting of 10 ms. This ensures that the clock
gating delay is appropriately configured to match the AHIT settings.
The following Vitesse/Microsemi/Microchip PHYs, among those supported by
this driver, have the host interface configurable as SGMII or QSGMII:
- VSC8504
- VSC8514
- VSC8552
- VSC8562
- VSC8572
- VSC8574
- VSC8575
- VSC8582
- VSC8584
All these PHYs are documented to have bit 7 of "MAC SerDes PCS Control"
as "MAC SerDes ANEG enable".
Out of these, I could test the VSC8514 quad PHY in QSGMII. This works
both with the in-band autoneg on and off, on the NXP LS1028A-RDB and
T1040-RDB boards.
Notably, the bit is sticky (survives soft resets), so giving Linux the
tools to read and modify this settings makes it robust to changes made
to it by previous boot layers (U-Boot).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250813074454.63224-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a backup port is configured for a bridge port, the bridge will
redirect known unicast traffic towards the backup port when the primary
port is administratively up but without a carrier. This is useful, for
example, in MLAG configurations where a system is connected to two
switches and there is a peer link between both switches. The peer link
serves as the backup port in case one of the switches loses its
connection to the multi-homed system.
In order to avoid flooding when the primary port loses its carrier, the
bridge does not flush dynamic FDB entries pointing to the port upon STP
disablement, if the port has a backup port.
The above means that known unicast traffic destined to the primary port
will be blackholed when the port is put administratively down, until the
FDB entries pointing to it are aged-out.
Given that the current behavior is quite weird and unlikely to be
depended on by anyone, amend the bridge to redirect to the backup port
also when the primary port is administratively down and not only when it
does not have a carrier.
The change is motivated by a report from a user who expected traffic to
be redirected to the backup port when the primary port was put
administratively down while debugging a network issue.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250812080213.325298-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ever since uevent support was added for AER and EEH with commit 856e1eb9bdd4 ("PCI/AER: Add uevents in AER and EEH error/resume"), it
reported PCI_ERS_RESULT_NONE as uevent when recovery begins.
Commit 7b42d97e99d3 ("PCI/ERR: Always report current recovery status for
udev") subsequently amended AER to report the actual return value of
error_detected().
Make the same change to EEH to align it with AER and s390.
After commit 84a9582fd203 ("serial: core: Start managing serial controllers
to enable runtime PM") serial drivers need to provide a device in
struct uart_port.dev otherwise an oops happens. To fix this issue
for ip22zilog driver switch driver to a platform driver and setup
the serial device in sgi-ip22 code.
The thunderbolt driver sets up device link dependencies from hotplug ports
to the Host Router (aka Native Host Interface, NHI). When resuming from
system sleep, this allows the Host Router to re-establish tunnels to
attached Thunderbolt devices before the hotplug ports resume.
To identify the hotplug ports, the driver utilizes the is_hotplug_bridge
flag which also encompasses ACPI slots handled by the ACPI hotplug driver.
Thunderbolt hotplug ports are always Hot-Plug Capable PCIe ports, so it is
more apt to identify them with the is_pciehp flag.
Similarly, hotplug ports on older Thunderbolt controllers have broken MSI
support and are quirked to use legacy INTx interrupts instead. The quirk
identifies them with is_hotplug_bridge, even though all affected ports are
also matched by is_pciehp. So use is_pciehp here as well.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-1-2e2fdc7d3f2c@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
stmmac_hw_setup() may return 0 on success and an appropriate negative
integer as defined in errno.h file on failure, just check it and then
return early if failed in stmmac_resume().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20250811073506.27513-2-yangtiezhu@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
emulate_vsyscall() expects to see X86_PF_INSTR in PFEC on a vsyscall
page fault, but the CPU does not report X86_PF_INSTR if neither
X86_FEATURE_NX nor X86_FEATURE_SMEP are enabled.
X86_FEATURE_NX should be enabled on nearly all 64-bit CPUs, except for
early P4 processors that did not support this feature.
Instead of explicitly checking for X86_PF_INSTR, compare the fault
address to RIP.
On machines with X86_FEATURE_NX enabled, issue a warning if RIP is equal
to fault address but X86_PF_INSTR is absent.
After a Fatal Error has been reported by a device and has been recovered
through a Secondary Bus Reset, AER updates the device's error_state to
pci_channel_io_normal before invoking its driver's ->resume() callback.
By contrast, EEH updates the error_state earlier, namely after resetting
the device and before invoking its driver's ->slot_reset() callback.
Commit c58dc575f3c8 ("powerpc/pseries: Set error_state to
pci_channel_io_normal in eeh_report_reset()") explains in great detail
that the earlier invocation is necessitated by various drivers checking
accessibility of the device with pci_channel_offline() and avoiding
accesses if it returns true. It returns true for any other error_state
than pci_channel_io_normal.
The device should be accessible already after reset, hence the reasoning
is that it's safe to update the error_state immediately afterwards.
This deviation between AER and EEH seems problematic because drivers
behave differently depending on which error recovery mechanism the
platform uses. Three drivers have gone so far as to update the
error_state themselves, presumably to work around AER's behavior.
For consistency, amend AER to update the error_state at the same recovery
steps as EEH. Drop the now unnecessary workaround from the three drivers.
Keep updating the error_state before ->resume() in case ->error_detected()
or ->mmio_enabled() return PCI_ERS_RESULT_RECOVERED, which causes
->slot_reset() to be skipped. There are drivers doing this even for Fatal
Errors, e.g. mhi_pci_error_detected().
In rare servicing scenarios, the hardware may delete the
state of the GSI QP, preventing it from generating CQEs
for pending send WRs. Since WRs submitted to the GSI QP
hold CM resources, the device cannot be removed until
those WRs are completed. This patch marks all pending
send WRs as failed, allowing the GSI QP to release the CM
resources and enabling safe device removal.
TIDSS uses crtc_* fields to propagate its registers and set the
clock rates. So set the CRTC modesetting timing parameters with
the adjusted mode when needed, to set correct values.
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://lore.kernel.org/r/20250624080402.302526-1-j-choudhary@ti.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While the cdns-dsi does not support DSI burst mode, the burst mode is
essentially DSI event mode with more versatile clocking and timings.
Thus cdns-dsi doesn't need to fail if the DSI peripheral driver requests
MIPI_DSI_MODE_VIDEO_BURST.
In my particular use case, this allows the use of ti-sn65dsi83 driver.
The driver tries to calculate the value for REG_WAKEUP_TIME. However,
the calculation itself is not correct, and to add on it, the resulting
value is almost always larger than the field's size, so the actual
result is more or less random.
According to the docs, figuring out the value for REG_WAKEUP_TIME
requires HW characterization and there's no way to have a generic
algorithm to come up with the value. That doesn't help at all...
However, we know that the value must be smaller than the line time, and,
at least in my understanding, the proper value for it is quite small.
Testing shows that setting it to 1/10 of the line time seems to work
well. All video modes from my HDMI monitor work with this algorithm.
Hopefully we'll get more information on how to calculate the value, and
we can then update this.
Use the crtc_* fields from drm_display_mode, instead of the "logical"
fields. This shouldn't change anything in practice, but afaiu the crtc_*
fields are the correct ones to use here.
The v4l2_fh initialized and added in vpu_v4l2_open() is delete and
cleaned up when the last reference to the vpu_inst is released. This may
happen later than at vpu_v4l2_close() time.
Not deleting and cleaning up the v4l2_fh when closing the file handle to
the video device is not ideal, as the v4l2_fh will still be present in
the video device's fh_list, and will store a copy of events queued to
the video device. There may also be other side effects of keeping alive
an object that represents an open file handle after the file handle is
closed.
The v4l2_fh instance is embedded in the vpu_inst structure, and is
accessed in two different ways:
- in vpu_notify_eos() and vpu_notify_source_change(), to queue V4L2
events to the file handle ; and
- through the driver to access the v4l2_fh.m2m_ctx pointer.
The v4l2_fh.m2m_ctx pointer is not touched by v4l2_fh_del() and
v4l2_fh_exit(). It is set to NULL by the driver when closing the file
handle, in vpu_v4l2_close().
The vpu_notify_eos() and vpu_notify_source_change() functions are called
in vpu_set_last_buffer_dequeued() and vdec_handle_resolution_change()
respectively, only if the v4l2_fh.m2m_ctx pointer is not NULL. There is
therefore a guarantee that no new event will be queued to the v4l2_fh
after vpu_v4l2_close() destroys the m2m_ctx.
The vpu_notify_eos() function is also called from vpu_vb2_buf_finish(),
which is guaranteed to be called for all queued buffers when
vpu_v4l2_close() calls v4l2_m2m_ctx_release(), and will not be called
later.
It is therefore safe to assume that the driver will not touch the
v4l2_fh, except to check the m2m_ctx pointer, after vpu_v4l2_close()
destroys the m2m_ctx. We can safely delete and cleanup the v4l2_fh
synchronously in vpu_v4l2_close().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Ming Qian <ming.qian@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ivtv driver has a structure named ivtv_open_id that models an open
file handle for the device. It embeds a v4l2_fh instance for file
handles that correspond to a V4L2 video device, and stores a pointer to
that v4l2_fh in struct ivtv_stream to identify which open file handle
owns a particular stream.
In addition to video devices, streams can be owned by ALSA PCM devices.
Those devices do not make use of the v4l2_fh instance for obvious
reasons, but the snd_ivtv_pcm_capture_open() function still initializes
a "fake" v4l2_fh for the sole purpose of using it as an open file handle
identifier. The v4l2_fh is not properly destroyed when the ALSA PCM
device is closed, leading to possible resource leaks.
Fortunately, the v4l2_fh instance pointed to by ivtv_stream is not
accessed, only the pointer value is used for comparison. Replace it with
a pointer to the ivtv_open_id structure that embeds the v4l2_fh, and
don't initialize the v4l2_fh for ALSA PCM devices.
The Device Under Test should always be the local system.
While the Rx test gets this right the Tx test is sending
from remote to local. So Tx of DMABUF memory happens on remote.
These tests never run in NIPA since we don't have a compatible
device so we haven't caught this.
Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250811231334.561137-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some kfd ioctls may not be available depending on the kernel version the
user is running, as such we need to report -ENOTTY so userland can
determine the cause of the ioctl failure.
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The register REG_SYS_CFG1 is used to determine chip basic information
as arguments of following flows, such as download firmware and load PHY
parameters, so driver read the value early (before power-on).
However, the direct IO is disallowed before power-on, or it causes wrong
values, which driver recognizes a chip as a wrong type RF_1T1R, but
actually RF_2T2R, causing driver warns:
rtw88_8822cs mmc1:0001:1: unsupported rf path (1)
Fix it by using indirect IO before power-on.
Reported-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Closes: https://lore.kernel.org/linux-wireless/699C22B4-A3E3-4206-97D0-22AB3348EBF6@gmail.com/T/#t Suggested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250724004815.7043-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When driver receives new or unknown C2H events, it print out messages
repeatedly once events are received, like
rtw89_8922ae 0000:81:00.0: PHY c2h class 2 not support
To avoid the thousands of messages, use rtw89_info_once() instead. Also,
print out class/func for unknown (undefined) class.
Reported-by: Sean Anderson <sean.anderson@linux.dev> Closes: https://lore.kernel.org/linux-wireless/20250729204437.164320-1-sean.anderson@linux.dev/ Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250804012234.8913-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce high-res OLED panel for the Dell XPS 9345
These timings were selected based on Alex Vinarkskis' commit,
(6b3815c6815f07acc7eeffa8ae734d1a1c0ee817) for the LQ134N1
and seem to work fine for the high-res OLED panel on the 9345.
Signed-off-by: Christopher Orr <chris.orr@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/aJKvm3SlhLGHW4qn@jander Signed-off-by: Sasha Levin <sashal@kernel.org>
Always set the RMDevidCheckIgnore registry key for GSP-RM so that it
will continue support newer variants of already supported GPUs.
GSP-RM maintains an internal list of PCI IDs of GPUs that it supports,
and checks if the current GPU is on this list. While the actual GPU
architecture (as specified in the BOOT_0/BOOT_42 registers) determines
how to enable the GPU, the PCI ID is used for the product name, e.g.
"NVIDIA GeForce RTX 5090".
Unfortunately, if there is no match, GSP-RM will refuse to initialize,
even if the device is fully supported. Nouveau will get an error
return code, but by then it's too late. This behavior may be corrected
in a future version of GSP-RM, but that does not help Nouveau today.
Fortunately, GSP-RM supports an undocumented registry key that tells it
to ignore the mismatch. In such cases, the product name returned will
be a blank string, but otherwise GSP-RM will continue.
Unlike Nvidia's proprietary driver, Nouveau cannot update to newer
firmware versions to keep up with every new hardware release. Instead,
we can permanently set this registry key, and GSP-RM will continue
to function the same with known hardware.
RDC PCI to PCIe bridges, present on Vortex86DX3 and Vortex86EX2 SoCs, do
not support MSIs. If enabled, interrupts generated by PCIe devices never
reach the processor.
I have contacted the manufacturer (DM&P) and they confirmed that PCI MSIs
need to be disabled for them.
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
While we do need at least 3.6 for kernel-doc to work, and at least
3.7 for it to output functions and structs with parameters at the
right order, let the python binary be compatible with legacy
versions.
The rationale is that the Kernel build nowadays calls kernel-doc
with -none on some places. Better not to bail out when older
versions are found.
With that, potentially this will run with python 2.7 and 3.2+,
according with vermin:
The minimal version I could check was version 3.4
(using anaconda). Anaconda doesn't support 3.2 or 3.3
anymore, and 3.2 doesn't even compile (I tested compiling
Python 3.2 on Fedora 42 and on Fedora 32 - no show).
With 3.4, the script didn't crash and emitted the right warning:
$ conda create -n py34 python=3.4
$ conda activate py34
python --version
Python 3.4.5
$ python ./scripts/kernel-doc --none include/media
Error: Python 3.6 or later is required by kernel-doc
$ conda deactivate
$ python --version
Python 3.13.5
$ python ./scripts/kernel-doc --none include/media
(no warnings and script ran properly)
Supporting 2.7 is out of scope, as it is EOL for 5 years, and
changing shebang to point to "python" instead of "python3"
would have a wider impact.
I did some extra checks about the differences from 3.2 and
3.4, and didn't find anything that would cause troubles:
For non-leaf paging structures we end up selecting a random index
between [0, 3], depending on the first user if the page-table is shared,
since non-leaf structures only have two bits in the HW for encoding the
PAT index, and here we are just passing along the full user provided
index, which can be an index as large as ~31 on xe2+. The user provided
index is meant for the leaf node, which maps the actual BO pages where
we have more PAT bits, and not the non-leaf nodes which are only mapping
other paging structures, and so only needs a minimal PAT index range.
Also the chosen index might need to consider how the driver mapped the
paging structures on the host side, like wc vs wb, which is separate
from the user provided index.
With that move the PDE PAT index selection under driver control. For now
just use a coherent index on platforms with page-tables that are cached
on host side, and incoherent otherwise. Using a coherent index could
potentially be expensive, and would be overkill if we know the page-table
is always uncached on host side.
v2 (Stuart):
- Add some documentation and split into separate helper.
BSpec: 59510 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250808103455.462424-2-matthew.auld@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Customer reported an issue that OS starts and stops device multiple times
during driver installation. Frequently disabling and enabling OTG may
prevent OTG from being safely disabled and cause incorrect configuration
upon the next enablement.
[How]
Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term
solution.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: TungYu Lu <tungyu.lu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
User queues are disabled before GEM objects are released
(protecting against user app crashes).
No races with PCI hot-unplug (because drm_dev_enter prevents cleanup
if iewdevice is being removed).
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY&HOW]
The user closed the lid while the system was powering on and opened it
again before the “apply_seamless_boot_optimization” was set to false,
resulting in the eDP remaining blank.
Reset the “apply_seamless_boot_optimization” to false when dpms off.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Danny Wang <Danny.Wang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SND_JACK_AVOUT is a more specific jack type for HDMI and DisplayPort.
Updatae the MediaTek drivers to use such jack type, allowing system to
determine the device type based on jack event.
Since version 0x105, the keyword 'init' was introduced into the profile,
which is used for chip initialization, particularly to store common
settings for other non-initialization profiles.
snprintf() returns the number of characters that *would* have been
written, which can overestimate how much you actually wrote to the
buffer in case of truncation. That leads to 'data += this' advancing
the pointer past the end of the buffer and size going negative.
Switching to scnprintf() prevents potential buffer overflows and ensures
consistent behavior when building the output string.
Previously, the LMTT directory pointer was only programmed for primary GT
within a tile. However, to ensure correct Local Memory access by VFs,
the LMTT configuration must be programmed on all GTs within the tile.
Lets program the LMTT directory pointer on every GT of the tile
to guarantee proper LMEM access across all GTs on VFs.
HSD: 18042797646
Bspec: 67468 Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250805091850.1508240-1-piotr.piorkowski@intel.com Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Acquire jpeg_pg_lock before changes to jpeg power state
and release it after power off from idle work handler.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The suspend and resume callbacks for pm and runtime pm should be same.
During suspending, it needs to stop all hardware contexts first. And
the hardware contexts will be restarted after the device is resumed.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20250803191450.1568851-1-lizhi.hou@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Cached metrics data validity is 1ms on arcturus. It's not reasonable for
any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cached metrics data validity is 1ms on aldebaran. It's not reasonable
for any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The reason some high-resolution monitors fail to display properly
is that this platform does not support sufficiently high DPP and
DISP clock frequencies
[How]
Update DISP and DPP clocks from the smu clock table then DML can
filter these mode if not support.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Accessing DC from amdgpu_dm is usually preceded by acquisition of
dc_lock mutex. Most of the DC API that DM calls are under a DC lock.
However, there are a few that are not. Some DC API called from interrupt
context end up sending DMUB commands via a DC API, while other threads were
using DMUB. This was apparent from a race between calls for setting idle
optimization enable/disable and the DC API to set vmin/vmax.
Offload the call to dc_stream_adjust_vmin_vmax() to a thread instead
of directly calling them from the interrupt handler such that it waits
for dc_lock.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move amdgpu_device_health_check into amdgpu_device_gpu_recover to
ensure that if the device is present can be checked before reset
The reason is:
1.During the dpc event, the device where the dpc event occurs is not
present on the bus
2.When both dpc event and ATHUB event occur simultaneously,the dpc thread
holds the reset domain lock when detecting error,and the gpu recover thread
acquires the hive lock.The device is simultaneously in the states of
amdgpu_ras_in_recovery and occurs_dpc,so gpu recover thread will not go to
amdgpu_device_health_check.It waits for the reset domain lock held by the
dpc thread, but dpc thread has not released the reset domain lock.In the dpc
callback slot_reset,to obtain the hive lock, the hive lock is held by the
gpu recover thread at this time.So a deadlock occurred
Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Try to ensure poison creation handle is completed in time
to set device rma value.
Signed-off-by: Ce Sun <cesun102@amd.com> Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The variable `pm_suspend_target_state` is conditionally defined only when
`CONFIG_SUSPEND` is enabled (see `include/linux/suspend.h`). Directly
referencing it without guarding by `#ifdef CONFIG_SUSPEND` causes build
failures when suspend functionality is disabled (e.g., `CONFIG_SUSPEND=n`).
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PF's restart worker shouldn't attempt to resume the device on
its own, since its goal is to finish PF and VFs reprovisioning on
the recently reset GuC. Take extra RPM reference while scheduling
a work and release it from the worker or when we cancel a work.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250801142822.180530-4-michal.wajdeczko@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits.
The GuC load process will abort if certain status codes (which are
indicative of a fatal error) are reported. Otherwise, it keeps waiting
until the 'success' code is returned. New error codes have been added
in recent GuC releases, so add support for aborting on those as well.
v2: Shuffle HWCONFIG_START to the front of the switch to keep the
ordering as per the enum define for clarity (review feedback by
Jonathan). Also add a description for the basic 'invalid init data'
code which was missing.
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[why & how]
Header misalignment in struct dmub_cmd_replay_copy_settings_data and
struct dmub_alpm_auxless_data causes incorrect data read between driver
and dmub.
Fix the misalignment and ensure that everything is aligned to 4-byte
boundaries.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
In the worst case, AUX intra-hop done can take hundreds of milliseconds as
each retimer in a link might have to wait a full AUX_RD_INTERVAL to send
LT abort downstream.
[HOW]
Wait 300ms for each retimer in a link to allow time to propagate a LT abort
without infinitely waiting on intra-hop done.
For no-retimer case, keep the max duration at 10ms.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
If symclk RCO is enabled, stream encoder may not be receiving an ungated
clock by the time we attempt to set stream attributes when setting dpms
on. Since the clock is gated, register writes to the stream encoder fail.
[HOW]
Move set_stream_attribute call into enable_stream, just after the point
where symclk32_se is ungated.
Logically there is no need to set stream attributes as early as is
currently done in link_set_dpms_on, so this should have no impact beyond
the RCO fix.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Log an error when vcn sram load fails in indirect mode
and return the same error value.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
When transitioning between topologies such as multi-display to single
display ODM 2:1, pipes might not be freed before use.
[How]
In dc_commit_streams, commit an additional, minimal transition if
original transition is not seamless to ensure pipes are freed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
timing_adjust_pending is used to defer certain programming sequences
when OTG timing is about to be changed, like with VRR. Insufficient
checking for timing change in this case caused a regression which
reduces PSR Replay residency.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why & How]
Tiled command rect dimensions is 1 based, do rect_x/y - 1 internally
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ostrowski Rafal <rostrows@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While we expect config directory names to match PCI device name,
currently we are only scanning provided names for domain, bus,
device and function numbers, without checking their format.
This would pass slightly broken entries like:
To avoid such mistakes, check if the name provided exactly matches
the canonical PCI device address format, which we recreated from
the parsed BDF data. Also simplify scanf format as it can't really
catch all formatting errors.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250722141059.30707-3-michal.wajdeczko@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As pm_runtime_force_suspend() will force the device state to suspend,
the driver needs to ensure no IRQ handlers are currently running. If not
those handlers may find they are now running on suspended hardware
despite holding a PM runtime reference. disable_irq() will sync any
currently running handlers, so move the IRQ disabling to cover the whole
of the forced suspend state to avoid such race conditions.
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,smc" anymore [1]. Use
"apple,t8103-smc" as base compatible as it is the SoC the driver and
bindings were written for.
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
