In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access.
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd1284 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix
touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003
to the goodix_acpi_match[] table.
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Commit b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b9639e ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after b6bcbce33596 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b9639e since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state") Cc: stable@vger.kernel.org Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If timestamp retriving needs to be retried and the local list of
SKB's already has entries, then it's spliced back into the socket
queue. However, the arguments for the splice helper are transposed,
causing exactly the wrong direction of splicing into the on-stack
list. Fix that up.
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Cc: stable@vger.kernel.org Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scanning can be offloaded to the firmware. To that end, the driver
prepares a list of channels to scan, including periodic visits back to
the operating channel, and sends the list to the firmware.
When the channel list is too long to fit in a single H2C message, the
driver splits the list, sends the first part, and tells the firmware to
scan. When the scan is complete, the driver sends the next part of the
list and tells the firmware to scan.
When the last channel that fit in the H2C message is the operating
channel something seems to go wrong in the firmware. It will
acknowledge receiving the list of channels but apparently it will not
do anything more. The AP can't be pinged anymore. The driver still
receives beacons, though.
One way to avoid this is to split the list of channels before the
operating channel.
Affected devices:
* RTL8851BU with firmware 0.29.41.3
* RTL8832BU with firmware 0.29.29.8
* RTL8852BE with firmware 0.29.29.8
The commit 57a5fbe39a18 ("wifi: rtw89: refactor flow that hw scan handles channel list")
is found by git blame, but it is actually to refine the scan flow, but not
a culprit, so skip Fixes tag.
Replace close_cached_dir() calls under cfid_list_lock with a new
close_cached_dir_locked() variant that uses kref_put() instead of
kref_put_lock() to avoid recursive locking when dropping references.
While the existing code works if the refcount >= 2 invariant holds,
this area has proven error-prone. Make deadlocks impossible and WARN
on invariant violations.
Cc: stable@vger.kernel.org Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org Fixes: 5d7ddc59b3d89b724a5aa8f30d0db94ff8d2d93f ("selinux: reduce path walk overhead") Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line length fixes] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before Linux had cred structures, the SELinux task_security_struct was
per-task and although the structure was switched to being per-cred
long ago, the name was never updated. This change renames it to
cred_security_struct to avoid confusion and pave the way for the
introduction of an actual per-task security structure for SELinux. No
functional change.
Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org Reported-by: Ilia Baryshnikov <qwelias@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704 Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sockmap feature allows bpf syscall from userspace, or based
on bpf sockops, replacing the sk_prot of sockets during protocol stack
processing with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
syn_recv_sock()/subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_syn_recv_sock()
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Then, this subflow can be normally used by sockmap, which replaces the
native sk_prot with sockmap's custom sk_prot. The issue occurs when the
user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().
Here, it uses sk->sk_prot to compare with the native sk_prot, but this
is incorrect when sockmap is used, as we may incorrectly set
sk->sk_socket->ops.
This fix uses the more generic sk_family for the comparison instead.
Additionally, this also prevents a WARNING from occurring:
result from ./scripts/decode_stacktrace.sh:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \
(net/mptcp/protocol.c:4005)
Modules linked in:
...
When a zero ASCE is passed to the __ptep_rdp() inline assembly, the
generated instruction should have the R3 field of the instruction set to
zero. However the inline assembly is written incorrectly: for such cases a
zero is loaded into a register allocated by the compiler and this register
is then used by the instruction.
This means that selected TLB entries may not be flushed since the specified
ASCE does not match the one which was used when the selected TLB entries
were created.
Fix this by removing the asce and opt parameters of __ptep_rdp(), since
all callers always pass zero, and use a hard-coded register zero for
the R3 field.
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
In systemd we're trying to switch the internal credentials setup logic
to new mount API [1], and I noticed fsconfig(FSCONFIG_CMD_RECONFIGURE)
consistently fails on tmpfs with noswap option. This can be trivially
reproduced with the following:
After some digging the culprit is shmem_reconfigure() rejecting
!(ctx->seen & SHMEM_SEEN_NOSWAP) && sbinfo->noswap, which is bogus
as ctx->seen serves as a mask for whether certain options are touched
at all. On top of that, noswap option doesn't use fsparam_flag_no,
hence it's not really possible to "reenable" swap to begin with.
Drop the check and redundant SHMEM_SEEN_NOSWAP flag.
[1] https://github.com/systemd/systemd/pull/39637
Fixes: 2c6efe9cf2d7 ("shmem: add support to ignore swap") Signed-off-by: Mike Yuan <me@yhndnzj.com> Link: https://patch.msgid.link/20251108190930.440685-1-me@yhndnzj.com Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sb_min_blocksize() may return 0. Check its return value to avoid
opt->blocksize and sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15 Fixes: 1b17a46c9243e9 ("isofs: convert isofs to use the new mount API") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com> Link: https://patch.msgid.link/20251104125009.2111925-4-yangyongpeng.storage@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "req.start" and "req.len" variables are u64 values that come from the
user at the start of the function. We mask away the high 32 bits of
"req.len" so that's capped at U32_MAX but the "req.start" variable can go
up to U64_MAX which means that the addition can still integer overflow.
In statmount_string(), most flags assign an output offset pointer (offp)
which is later updated with the string offset. However, the
STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the
struct fields instead of using offp. This leaves offp uninitialized,
leading to a possible uninitialized dereference when *offp is updated.
Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code
path consistent.
Fixes: 37c4a9590e1e ("statmount: allow to retrieve idmappings") Fixes: e52e97f09fb6 ("statmount: let unset strings be empty") Cc: stable@vger.kernel.org Signed-off-by: Zhen Ni <zhen.ni@easystack.cn> Link: https://patch.msgid.link/20251013114151.664341-1-zhen.ni@easystack.cn Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When emulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, but without format, a kernel panic
was triggered during the early boot stage while attempting to mount a
vfat filesystem.
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()") Cc: stable@vger.kernel.org Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo] Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've had reports from the field that some RK3588 Tiger have random
issues with eMMC errors.
Applying commit a28352cf2d2f ("mmc: sdhci-of-dwcmshc: Change
DLL_STRBIN_TAPNUM_DEFAULT to 0x4") didn't help and seemed to have made
things worse for our board.
Our HW department checked the eMMC lines and reported that they are too
long and don't look great so signal integrity is probably not the best.
Note that not all Tigers with the same eMMC chip have errors, so the
suspicion is that we're really on the edge in terms of signal integrity
and only a handful devices are failing. Additionally, we have RK3588
Jaguars with the same eMMC chip but the layout is different and we also
haven't received reports about those so far.
Lowering the max-frequency to 150MHz from 200MHz instead of simply
disabling HS400 was briefly tested and seem to work as well. We've
disabled HS400 downstream and haven't received reports since so we'll go
with that instead of lowering the max-frequency.
In commit 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi
files for SoC variants"), everything shared between variants of RK3399
was put into rk3399-base.dtsi and the rest in variant-specific DTSI,
such as rk3399-t, rk3399-op1, rk3399, etc.
Therefore, the variant-specific DTSI should include rk3399-base.dtsi and
not another variant's DTSI.
rk3399-op1 wrongly includes rk3399 (a variant) DTSI instead of
rk3399-base DTSI, let's fix this oversight by including the intended
DTSI.
Fortunately, this had no impact on the resulting DTB since all nodes
were named the same and all node properties were overridden in
rk3399-op1.dtsi. This was checked by doing a checksum of rk3399-op1 DTBs
before and after this commit.
As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1
"memory map", the definition of the EARC control register shows that the
EARC controller software reset is controlled via bit 0, while the EARC PHY
software reset is controlled via bit 1.
This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK
and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would
imply that the EARC controller software reset is controlled via bit 1 and
the EARC PHY software reset is controlled via bit 2. Fix them.
Fixes: a83bc87cd30a ("reset: imx8mp-audiomix: Prepare the code for more reset bits") Cc: stable@vger.kernel.org Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vcc3v3_pcie20 fixed regulator powers the PCIe device-side 3.3V rail
for pcie2x1l2 via vpcie3v3-supply. The DTS mistakenly set its
regulator-min/max-microvolt to 1800000 (1.8 V). Correct both to 3300000
(3.3 V) to match the rail name, the PCIe/M.2 power requirement, and the
actual hardware wiring on Orange Pi 5.
Page 13 of the PineTab2 v2 schematic dd 20230417 shows VCCIO4's power
source is VCCIO_WL. Page 19 shows that VCCIO_WL is connected to
VCCA1V8_PMU, so fix the PineTab2 dtsi to reflect that.
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f774
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
Drop the top-frequency OPPs from both the LITTLE and big CPU clusters on
RK3576, as neither the opensource TF-A [1] nor the recent (after v1.08)
binary BL31 images provided by Rockchip expose those.
This fixes the problem [2] when the cpufreq governor tries to jump
directly to the highest-frequency OPP, which results in a failed SCMI call
leaving the system stuck at the previous OPP before the attempted change.
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e80458a ("timers: Add shutdown mechanism to the internal functions") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Verify the offset to prevent OOB access in the hypervisor
FF-A buffer in case an untrusted large enough value
[U32_MAX - sizeof(struct ffa_composite_mem_region) + 1, U32_MAX]
is set from the host kernel.
The blamed commit introduced the function lanphy_modify_page_reg which
as name suggests it, it modifies the registers. In the same commit we
have started to use this function inside the drivers. The problem is
that in the function lan8814_config_init we passed the wrong page number
when disabling the aneg towards host side. We passed extended page number
4(LAN8814_PAGE_COMMON_REGS) instead of extended page
5(LAN8814_PAGE_PORT_REGS)
In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when
setup_instance() fails with an error code. Fix that by freeing the urb
before freeing the hw structure. Also change the error paths to use the
goto ladder style.
Compile tested only. Issue found using a prototype static analysis tool.
Add VMX exit handlers for SEAMCALL and TDCALL to inject a #UD if a non-TD
guest attempts to execute SEAMCALL or TDCALL. Neither SEAMCALL nor TDCALL
is gated by any software enablement other than VMXON, and so will generate
a VM-Exit instead of e.g. a native #UD when executed from the guest kernel.
Note! No unprivileged DoS of the L1 kernel is possible as TDCALL and
SEAMCALL #GP at CPL > 0, and the CPL check is performed prior to the VMX
non-root (VM-Exit) check, i.e. userspace can't crash the VM. And for a
nested guest, KVM forwards unknown exits to L1, i.e. an L2 kernel can
crash itself, but not L1.
Note #2! The Intel® Trust Domain CPU Architectural Extensions spec's
pseudocode shows the CPL > 0 check for SEAMCALL coming _after_ the VM-Exit,
but that appears to be a documentation bug (likely because the CPL > 0
check was incorrectly bundled with other lower-priority #GP checks).
Testing on SPR and EMR shows that the CPL > 0 check is performed before
the VMX non-root check, i.e. SEAMCALL #GPs when executed in usermode.
Note #3! The aforementioned Trust Domain spec uses confusing pseudocode
that says that SEAMCALL will #UD if executed "inSEAM", but "inSEAM"
specifically means in SEAM Root Mode, i.e. in the TDX-Module. The long-
form description explicitly states that SEAMCALL generates an exit when
executed in "SEAM VMX non-root operation". But that's a moot point as the
TDX-Module injects #UD if the guest attempts to execute SEAMCALL, as
documented in the "Unconditionally Blocked Instructions" section of the
TDX-Module base specification.
Cc: stable@vger.kernel.org Cc: Kai Huang <kai.huang@intel.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20251016182148.69085-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the immediate forms of RDMSR and WRMSRNS (currently
Intel-only). The immediate variants are only valid in 64-bit mode, and
use a single general purpose register for the data (the register is also
encoded in the instruction, i.e. not implicit like regular RDMSR/WRMSR).
The immediate variants are primarily motivated by performance, not code
size: by having the MSR index in an immediate, it is available *much*
earlier in the CPU pipeline, which allows hardware much more leeway about
how a particular MSR is handled.
Intel VMX support for the immediate forms of MSR accesses communicates
exit information to the host as follows:
1) The immediate form of RDMSR uses VM-Exit Reason 84.
2) The immediate form of WRMSRNS uses VM-Exit Reason 85.
3) For both VM-Exit reasons 84 and 85, the Exit Qualification field is
set to the MSR index that triggered the VM-Exit.
4) Bits 3 ~ 6 of the VM-Exit Instruction Information field are set to
the register encoding used by the immediate form of the instruction,
i.e. the destination register for RDMSR, and the source for WRMSRNS.
5) The VM-Exit Instruction Length field records the size of the
immediate form of the MSR instruction.
To deal with userspace RDMSR exits, stash the destination register in a
new kvm_vcpu_arch field, similar to cui_linear_rip, pio, etc.
Alternatively, the register could be saved in kvm_run.msr or re-retrieved
from the VMCS, but the former would require sanitizing the value to ensure
userspace doesn't clobber the value to an out-of-bounds index, and the
latter would require a new one-off kvm_x86_ops hook.
Don't bother adding support for the instructions in KVM's emulator, as the
only way for RDMSR/WRMSR to be encountered is if KVM is emulating large
swaths of code due to invalid guest state, and a vCPU cannot have invalid
guest state while in 64-bit mode.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
[sean: minor tweaks, massage and expand changelog] Link: https://lore.kernel.org/r/20250805202224.1475590-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename "ecx" variables in {RD,WR}MSR and RDPMC helpers to "msr" and "pmc"
respectively, in anticipation of adding support for the immediate variants
of RDMSR and WRMSRNS, and to better document what the variables hold
(versus where the data originated).
No functional change intended.
Link: https://lore.kernel.org/r/20250805202224.1475590-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
and snd_soc_pm_ops is associated with the soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
the soc_driver and the DA7213 codec driver, the power management subsystem
does not enforce a specific suspend/resume order between the DA7213 driver
and the soc_driver.
Because of this, the different codec component functionalities, called from
snd_soc_resume() to reconfigure various functions, can race with the
DA7213 struct dev_pm_ops::resume function, leading to misapplied
configuration. This occasionally results in clipped sound.
Fix this by dropping the struct dev_pm_ops::{suspend, resume} and use
instead struct snd_soc_component_driver::{suspend, resume}. This ensures
the proper configuration sequence is handled by the ASoC subsystem.
Cc: stable@vger.kernel.org Fixes: 431e040065c8 ("ASoC: da7213: Add suspend to RAM support") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://patch.msgid.link/20251104114914.2060603-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for parsing PC source info in stacktraces (e.g. '(P)') was added
in commit 2bff77c665ed ("scripts/decode_stacktrace.sh: fix decoding of
lines with an additional info"). However, this logic was placed after the
build ID processing. This incorrect order fails to parse lines containing
both elements, e.g.:
This patch fixes the problem by extracting the PC source info first and
then processing the module build ID. With this change, the line above is
now properly parsed as such:
With lines having a symbol to decode, the script was only trying to
preserve the alignment for the timestamps, but not the rest, nor when the
caller was set (CONFIG_PRINTK_CALLER=y).
A few patches slightly improving the output generated by
decode_stacktrace.sh.
This patch (of 3):
Lines having a symbol to decode might not always have info after this
symbol. It means ${info_str} might not be set, but it will always be
printed after a space, causing trailing whitespaces.
That's a detail, but when the output is opened with an editor marking
these trailing whitespaces, that's a bit disturbing. It is easy to remove
them by printing this variable with a space only if it is set.
While at it, do the same with ${module} and print everything in one line.
Patch series "Fix SIGBUS semantics with large folios", v3.
Accessing memory within a VMA, but beyond i_size rounded up to the next
page size, is supposed to generate SIGBUS.
Darrick reported[1] an xfstests regression in v6.18-rc1. generic/749
failed due to missing SIGBUS. This was caused by my recent changes that
try to fault in the whole folio where possible:
19773df031bc ("mm/fault: try to map the entire file folio in finish_fault()") 357b92761d94 ("mm/filemap: map entire large folio faultaround")
These changes did not consider i_size when setting up PTEs, leading to
xfstest breakage.
However, the problem has been present in the kernel for a long time -
since huge tmpfs was introduced in 2016. The kernel happily maps
PMD-sized folios as PMD without checking i_size. And huge=always tmpfs
allocates PMD-size folios on any writes.
I considered this corner case when I implemented a large tmpfs, and my
conclusion was that no one in their right mind should rely on receiving a
SIGBUS signal when accessing beyond i_size. I cannot imagine how it could
be useful for the workload.
But apparently filesystem folks care a lot about preserving strict SIGBUS
semantics.
Generic/749 was introduced last year with reference to POSIX, but no real
workloads were mentioned. It also acknowledged the tmpfs deviation from
the test case.
POSIX indeed says[3]:
References within the address range starting at pa and
continuing for len bytes to whole pages following the end of an
object shall result in delivery of a SIGBUS signal.
The patchset fixes the regression introduced by recent changes as well as
more subtle SIGBUS breakage due to split failure on truncation.
This patch (of 2):
Accesses within VMA, but beyond i_size rounded up to PAGE_SIZE are
supposed to generate SIGBUS.
Recent changes attempted to fault in full folio where possible. They did
not respect i_size, which led to populating PTEs beyond i_size and
breaking SIGBUS semantics.
Darrick reported generic/749 breakage because of this.
However, the problem existed before the recent changes. With huge=always
tmpfs, any write to a file leads to PMD-size allocation. Following the
fault-in of the folio will install PMD mapping regardless of i_size.
Fix filemap_map_pages() and finish_fault() to not install:
- PTEs beyond i_size;
- PMD mappings across i_size;
Make an exception for shmem/tmpfs that for long time intentionally
mapped with PMDs across i_size.
Link: https://lkml.kernel.org/r/20251027115636.82382-1-kirill@shutemov.name Link: https://lkml.kernel.org/r/20251027115636.82382-2-kirill@shutemov.name Signed-off-by: Kiryl Shutsemau <kas@kernel.org> Fixes: 6795801366da ("xfs: Support large folios") Reported-by: "Darrick J. Wong" <djwong@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kiryl Shutsemau <kas@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Page cache folios from a file system that support large block size (LBS)
can have minimal folio order greater than 0, thus a high order folio might
not be able to be split down to order-0. Commit e220917fa507 ("mm: split
a folio in minimum folio order chunks") bumps the target order of
split_huge_page*() to the minimum allowed order when splitting a LBS
folio. This causes confusion for some split_huge_page*() callers like
memory failure handling code, since they expect after-split folios all
have order-0 when split succeeds but in reality get min_order_for_split()
order folios and give warnings.
Fix it by failing a split if the folio cannot be split to the target
order. Rename try_folio_split() to try_folio_split_to_order() to reflect
the added new_order parameter. Remove its unused list parameter.
[The test poisons LBS folios, which cannot be split to order-0 folios, and
also tries to poison all memory. The non split LBS folios take more
memory than the test anticipated, leading to OOM. The patch fixed the
kernel warning and the test needs some change to avoid OOM.]
Link: https://lkml.kernel.org/r/20251017013630.139907-1-ziy@nvidia.com Fixes: e220917fa507 ("mm: split a folio in minimum folio order chunks") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: syzbot+e6367ea2fdab6ed46056@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68d2c943.a70a0220.1b52b.02b3.GAE@google.com/ Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dev Jain <dev.jain@arm.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)") Cc: stable@vger.kernel.org Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints") Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Limit the workaround for the lack of the proper splash-screen handover
handling to the legacy ARM 32bit systems and replace forcing a sync_state
by explicite power domain shutdown. This approach lets compiler to
optimize it out on newer ARM 64bit systems.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Fixes: 0745658aebbe ("pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_get_child_by_name() returns a node pointer with refcount incremented, we
should use of_node_put() on it when not needed anymore. Add the missing
of_node_put() to avoid refcount leak.
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If of_genpd_add_provider_onecell() fails during probe, the previously
created generic power domains are not removed, leading to a memory leak
and potential kernel crash later in genpd_debug_add().
Add proper error handling to unwind the initialized domains before
returning from probe to ensure all resources are correctly released on
failure.
Example crash trace observed without this fix:
| Unable to handle kernel paging request at virtual address fffffffffffffc70
| CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : genpd_debug_add+0x2c/0x160
| lr : genpd_debug_init+0x74/0x98
| Call trace:
| genpd_debug_add+0x2c/0x160 (P)
| genpd_debug_init+0x74/0x98
| do_one_initcall+0xd0/0x2d8
| do_initcall_level+0xa0/0x140
| do_initcalls+0x60/0xa8
| do_basic_setup+0x28/0x40
| kernel_init_freeable+0xe8/0x170
| kernel_init+0x2c/0x140
| ret_from_fork+0x10/0x20
Fixes: 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apply WA_14024681466 to Xe3_LPG graphics IP versions from 30.00 to 30.05.
v2: (Matthew Roper)
- Remove stepping filter as workaround applies to all steppings.
- Add an engine class filter so it only applies to the RENDER engine.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Link: https://patch.msgid.link/20251027092643.335904-1-nitin.r.gote@intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 071089a69e199bd810ff31c4c933bd528e502743) Cc: stable@vger.kernel.org # v6.16+ Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First, we can't assume pipe == crtc index. If a pipe is fused off in
between, it no longer holds. intel_crtc_for_pipe() is the only proper
way to get from a pipe to the corresponding crtc.
Second, drivers aren't supposed to access or index drm->vblank[]
directly. There's drm_crtc_vblank_crtc() for this.
Use both functions to fix the pipe to vblank conversion.
Fixes: f02658c46cf7 ("drm/i915/psr: Add mechanism to notify PSR of pipe enable/disable") Cc: Jouni Högander <jouni.hogander@intel.com> Cc: stable@vger.kernel.org # v6.16+ Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patch.msgid.link/20251106200000.1455164-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 2750f6765d6974f7e163c5d540a96c8703f6d8dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain multi-GPU configurations (especially GFX12) may hit
data corruption when a DCC-compressed VRAM surface is shared across GPUs
using peer-to-peer (P2P) DMA transfers.
Such surfaces rely on device-local metadata and cannot be safely accessed
through a remote GPU’s page tables. Attempting to import a DCC-enabled
surface through P2P leads to incorrect rendering or GPU faults.
This change disables P2P for DCC-enabled VRAM buffers that are contiguous
and allocated on GFX12+ hardware. In these cases, the importer falls back
to the standard system-memory path, avoiding invalid access to compressed
surfaces.
Future work could consider optional migration (VRAM→System→VRAM) if a
performance regression is observed when `attach->peer2peer = false`.
Tested on:
- Dual RX 9700 XT (Navi4x) setup
- GNOME and Wayland compositor scenarios
- Confirmed no corruption after disabling P2P under these conditions
v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS.
v3: simplify for upsteam and fix ip version check (Alex)
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dff2bb709e6fbd97e263fd12bf12802d2b5a0cf) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a potential deadlock caused by inconsistent spinlock usage
between interrupt and process contexts in the userq fence driver.
The issue occurs when amdgpu_userq_fence_driver_process() is called
from both:
- Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process()
- Process context: amdgpu_eviction_fence_suspend_worker() ->
amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process()
In interrupt context, the spinlock was acquired without disabling
interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock
is acquired in process context, the kernel detects inconsistent
locking since the process context acquisition would enable interrupts
while holding a lock previously acquired in interrupt context.
Over allocation of save area is not fatal, only under allocation is.
ROCm has various components that independently claim authority over save
area size.
Unless KFD decides to claim single authority, relax size checks.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15bd4958fe38e763bc17b607ba55155254a01f55) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
data_reloc_print_warning_inode() calls btrfs_get_fs_root() to obtain
local_root, but fails to release its reference when paths_from_inode()
returns an error. This causes a potential memory leak.
Add a missing btrfs_put_root() call in the error path to properly
decrease the reference count of local_root.
When logging that a new name exists, we skip updating the inode's
last_log_commit field to prevent a later explicit fsync against the inode
from doing nothing (as updating last_log_commit makes btrfs_inode_in_log()
return true). We are detecting, at btrfs_log_inode(), that logging a new
name is happening by checking the logging mode is not LOG_INODE_EXISTS,
but that is not enough because we may log parent directories when logging
a new name of a file in LOG_INODE_ALL mode - we need to check that the
logging_new_name field of the log context too.
An example scenario where this results in an explicit fsync against a
directory not persisting changes to the directory is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/foo
$ sync
$ mkdir /mnt/dir
# Write some data to our file and fsync it.
$ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/foo
# Add a new link to our file. Since the file was logged before, we
# update it in the log tree by calling btrfs_log_new_name().
$ ln /mnt/foo /mnt/dir/bar
# fsync the root directory - we expect it to persist the dentry for
# the new directory "dir".
$ xfs_io -c "fsync" /mnt
<power fail>
After mounting the fs the entry for directory "dir" does not exists,
despite the explicit fsync on the root directory.
Here's why this happens:
1) When we fsync the file we log the inode, so that it's present in the
log tree;
2) When adding the new link we enter btrfs_log_new_name(), and since the
inode is in the log tree we proceed to updating the inode in the log
tree;
3) We first set the inode's last_unlink_trans to the current transaction
(early in btrfs_log_new_name());
4) We then eventually enter btrfs_log_inode_parent(), and after logging
the file's inode, we call btrfs_log_all_parents() because the inode's
last_unlink_trans matches the current transaction's ID (updated in the
previous step);
5) So btrfs_log_all_parents() logs the root directory by calling
btrfs_log_inode() for the root's inode with a log mode of LOG_INODE_ALL
so that new dentries are logged;
6) At btrfs_log_inode(), because the log mode is LOG_INODE_ALL, we
update root inode's last_log_commit to the last transaction that
changed the inode (->last_sub_trans field of the inode), which
corresponds to the current transaction's ID;
7) Then later when user space explicitly calls fsync against the root
directory, we enter btrfs_sync_file(), which calls skip_inode_logging()
and that returns true, since its call to btrfs_inode_in_log() returns
true and there are no ordered extents (it's a directory, never has
ordered extents). This results in btrfs_sync_file() returning without
syncing the log or committing the current transaction, so all the
updates we did when logging the new name, including logging the root
directory, are not persisted.
So fix this by but updating the inode's last_log_commit if we are sure
we are not logging a new name (if ctx->logging_new_name is false).
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com> Link: https://lore.kernel.org/linux-btrfs/03c5d7ec-5b3d-49d1-95bc-8970a7f82d87@gmail.com/ Fixes: 130341be7ffa ("btrfs: always update the logged transaction when logging new names") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stripe offset calculation in the zoned code for raid0 and raid10
wrongly uses map->stripe_size to calculate it. In fact, map->stripe_size is
the size of the device extent composing the block group, which always is
the zone_size on the zoned setup.
Fix it by using BTRFS_STRIPE_LEN and BTRFS_STRIPE_LEN_SHIFT. Also, optimize
the calculation a bit by doing the common calculation only once.
When a block group contains both conventional zone and sequential zone, the
capacity of the block group is wrongly set to the block group's full
length. The capacity should be calculated in btrfs_load_block_group_* using
the last allocation offset.
Fixes: 568220fa9657 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree") CC: stable@vger.kernel.org # v6.12+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If image writing fails, a return code is passed up to the caller, but
none of the callers log anything to the log and so the only record
of it is the return code that userspace gets.
Adjust the logging so that the image size and speed of writing is
only emitted on success and if there is an error, it's saved to the
logs.
Fixes: a06c6f5d3cc9 ("PM: hibernate: Move to crypto APIs for LZO compression") Reported-by: Askar Safin <safinaskar@gmail.com> Closes: https://lore.kernel.org/linux-pm/20251105180506.137448-1-safinaskar@gmail.com/ Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: Askar Safin <safinaskar@gmail.com> Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
[ rjw: Added missing braces after "else", changelog edits ] Link: https://patch.msgid.link/20251106045158.3198061-2-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current single-bit error injection mechanism flips bits directly in ECC RAM
by performing write and read operations. When the ECC RAM is actively used by
the Ethernet or USB controller, this approach sometimes trigger a false
double-bit error.
Switch both Ethernet and USB EDAC devices to use the INTTEST register
(altr_edac_a10_device_inject_fops) for single-bit error injection, similar to
the existing double-bit error injection method.
The OCRAM ECC is always enabled either by the BootROM or by the Secure Device
Manager (SDM) during a power-on reset on SoCFPGA.
However, during a warm reset, the OCRAM content is retained to preserve data,
while the control and status registers are reset to their default values. As
a result, ECC must be explicitly re-enabled after a warm reset.
Now we use virtual addresses to fill CSR_MERRENTRY/CSR_TLBRENTRY, but
hardware hope physical addresses. Now it works well because the high
bits are ignored above PA_BITS (48 bits), but explicitly use physical
addresses can avoid potential bugs. So fix it.
Now there 5 places which calculate max_pfn & max_low_pfn:
1. in fdt_setup() for FDT systems;
2. in memblock_init() for ACPI systems;
3. in init_numa_memory() for NUMA systems;
4. in arch_mem_init() to recalculate for "mem=" cmdline;
5. in paging_init() to recalculate for NUMA systems.
Since memblock_init() is called both for ACPI and FDT systems, move the
calculation out of the for_each_efi_memory_desc() loop can eliminate the
first case. The last case is very questionable (may be derived from the
MIPS/Loongson code) and breaks the "mem=" cmdline, so should be removed.
And then the NUMA version of paging_init() can be also eliminated.
After consolidation there are 3 places of calculation:
1. in memblock_init() for both ACPI and FDT systems;
2. in init_numa_memory() to recalculate for NUMA systems;
3. in arch_mem_init() to recalculate for the "mem=" cmdline.
For all cases the calculation is:
max_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
When livepatch is attached to the same function as bpf trampoline with
a fexit program, bpf trampoline code calls register_ftrace_direct()
twice. The first time will fail with -EAGAIN, and the second time it
will succeed. This requires register_ftrace_direct() to unregister
the address on the first attempt. Otherwise, the bpf trampoline cannot
attach. Here is an easy way to reproduce this issue:
Fix this by cleaning up the hash when register_ftrace_function_nolock hits
errors.
Also, move the code that resets ops->func and ops->trampoline to the error
path of register_ftrace_direct(); and add a helper function reset_direct()
in register_ftrace_direct() and unregister_ftrace_direct().
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use") Cc: stable@vger.kernel.org # v6.6+ Reported-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com> Closes: https://lore.kernel.org/live-patching/c5058315a39d4615b333e485893345be@crowdstrike.com/ Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com> Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251027175023.1521602-2-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous commit reused the recyling infrastructure for early cleanup,
but this is not enough for the case where our internal caches have
overflowed. If this happens, then the allocated iovec can get leaked if
the request is also aborted early.
Reinstate the previous forced free of the iovec for that situation.
Starting with Rust 1.91.0 (released 2025-10-30), in upstream commit ab91a63d403b ("Ignore intrinsic calls in cross-crate-inlining cost model")
[1][2], `bindings.o` stops containing DWARF debug information because the
`Default` implementations contained `write_bytes()` calls which are now
ignored in that cost model (note that `CLIPPY=1` does not reproduce it).
This means `gendwarfksyms` complains:
RUSTC L rust/bindings.o
error: gendwarfksyms: process_module: dwarf_get_units failed: no debugging information?
There are several alternatives that would work here: conditionally
skipping in the cases needed (but that is subtle and brittle), forcing
DWARF generation with e.g. a dummy `static` (ugly and we may need to
do it in several crates), skipping the call to the tool in the Kbuild
command when there are no exports (fine) or teaching the tool to do so
itself (simple and clean).
Thus do the last one: don't attempt to process files if we have no symbol
versions to calculate.
[ I used the commit log of my patch linked below since it explained the
root issue and expanded it a bit more to summarize the alternatives.
Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member
warning due to potential unaligned pointer access:
perf_test.c:239:38: warning: taking address of packed member 'write_index'
of class or structure 'user_reg' may result in an unaligned pointer value
[-Waddress-of-packed-member]
239 | ASSERT_NE(-1, write(self->data_fd, ®.write_index,
| ^~~~~~~~~~~~~~~
Since write(2) works with any alignment. Casting '®.write_index'
explicitly to 'void *' to suppress this warning.
Microcode that resolves the RDSEED failure (SB-7055 [1]) has been released for
additional Zen5 models to linux-firmware [2]. Update the zen5_rdseed_microcode
array to cover these new models.
Since commit d24cfee7f63d ("spi: Fix acpi deferred irq probe"), the
acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called
on the SPI device.
If there is no driver for the SPI device then the move to spi_probe()
results in acpi_dev_gpio_irq_get() never getting called. This may
cause problems by leaving the GPIO pin floating because this call is
responsible for setting up the GPIO pin direction and/or bias according
to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device()
to ensure the GPIO pin is always correctly setup, while keeping the
acpi_dev_gpio_irq_get() call added to spi_probe() to deal with
-EPROBE_DEFER returns caused by the GPIO controller not having a driver
yet.
cifs_pick_channel iterates candidate channels using cur. The
reconnect-state test mistakenly used a different variable.
This checked the wrong slot and would cause us to skip a healthy channel
and to dispatch on one that needs reconnect, occasionally failing
operations when a channel was down.
Fix by replacing for the correct variable.
Fixes: fc43a8ac396d ("cifs: cifs_pick_channel should try selecting active channels") Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The qm_get_qos_value() function calls bus_find_device_by_name() which
increases the device reference count, but fails to call put_device()
to balance the reference count and lead to a device reference leak.
Add put_device() calls in both the error path and success path to
properly balance the reference count.
Found via static analysis.
Fixes: 22d7a6c39cab ("crypto: hisilicon/qm - add pci bdf number check") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved: af000000-beffffff : Crash kernel
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory.
Link: https://lkml.kernel.org/r/20251101193741.289252-1-sourabhjain@linux.ibm.com Fixes: 16c6006af4d4 ("kexec: enable kexec_crash_size to support two crash kernel regions") Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When alloc_slab_obj_exts() fails and then later succeeds in allocating a
slab extension vector, it calls handle_failed_objexts_alloc() to mark all
objects in the vector as empty. As a result all objects in this slab
(slabA) will have their extensions set to CODETAG_EMPTY.
Later on if this slabA is used to allocate a slabobj_ext vector for
another slab (slabB), we end up with the slabB->obj_exts pointing to a
slabobj_ext vector that itself has a non-NULL slabobj_ext equal to
CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to
free slabB->obj_exts vector.
free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will
generate a warning because it expects slabobj_ext vectors to have a NULL
obj_ext, not CODETAG_EMPTY.
Modify mark_objexts_empty() to skip the warning and setting the obj_ext
value if it's already set to CODETAG_EMPTY.
To quickly detect this WARN, I modified the code from
WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1);
The user calls fsconfig twice, but when the program exits, free() only
frees ctx->source for the second fsconfig, not the first.
Regarding fc->source, there is no code in the fs context related to its
memory reclamation.
To fix this memory leak, release the source memory corresponding to ctx
or fc before each parsing.
Reported-by: syzbot+72afd4c236e6bc3f4bac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=72afd4c236e6bc3f4bac Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bus_find_device_by_name() function returns a device pointer with an
incremented reference count, but the original code was missing put_device()
calls in some return paths, leading to reference count leaks.
Fix this by ensuring put_device() is called before function exit after
bus_find_device_by_name() succeeds
This follows the same pattern used elsewhere in the kernel where
bus_find_device_by_name() is properly paired with put_device().
Found via static analysis and code review.
Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://patch.msgid.link/20251029071804.8425-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCM stream data in USB-audio driver is transferred over USB URB
packet buffers, and each packet size is determined dynamically. The
packet sizes are limited by some factors such as wMaxPacketSize USB
descriptor. OTOH, in the current code, the actually used packet sizes
are determined only by the rate and the PPS, which may be bigger than
the size limit above. This results in a buffer overflow, as reported
by syzbot.
Basically when the limit is smaller than the calculated packet size,
it implies that something is wrong, most likely a weird USB
descriptor. So the best option would be just to return an error at
the parameter setup time before doing any further operations.
This patch introduces such a sanity check, and returns -EINVAL when
the packet size is greater than maxpacksize. The comparison with
ep->packsize[1] alone should suffice since it's always equal or
greater than ep->packsize[0].
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
ciu clock is 2 times of io clock, but the sample clk used is
derived from io clock provided to the card. So we should use
io clock to calculate the phase.
This patch refactors pxamci_probe() to use devm-managed resource
allocation (e.g. devm_dma_request_chan) and dev_err_probe() for
improved readability and automatic cleanup on probe failure.
It also removes redundant NULL assignments and manual resource release
logic from pxamci_probe(), and eliminates the corresponding release
calls from pxamci_remove().
Both uniform and non uniform split check missed the check to prevent
splitting anon folios in swapcache to non-zero order.
Splitting anon folios in swapcache to non-zero order can cause data
corruption since swapcache only support PMD order and order-0 entries.
This can happen when one use split_huge_pages under debugfs to split
anon folios in swapcache.
In-tree callers do not perform such an illegal operation. Only debugfs
interface could trigger it. I will put adding a test case on my TODO
list.
Fix the check.
Link: https://lkml.kernel.org/r/20251105162910.752266-1-ziy@nvidia.com Fixes: 58729c04cf10 ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: "David Hildenbrand (Red Hat)" <david@kernel.org> Closes: https://lore.kernel.org/all/dc0ecc2c-4089-484f-917f-920fdca4c898@kernel.org/ Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Nico Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 78524b05f1a3 ("mm, swap: avoid redundant swap device
pinning"), the common helper for allocating and preparing a folio in the
swap cache layer no longer tries to get a swap device reference
internally, because all callers of __read_swap_cache_async are already
holding a swap entry reference. The repeated swap device pinning isn't
needed on the same swap device.
Caller of VMA readahead is also holding a reference to the target entry's
swap device, but VMA readahead walks the page table, so it might encounter
swap entries from other devices, and call __read_swap_cache_async on
another device without holding a reference to it.
So it is possible to cause a UAF when swapoff of device A raced with
swapin on device B, and VMA readahead tries to read swap entries from
device A. It's not easy to trigger, but in theory, it could cause real
issues.
Make VMA readahead try to get the device reference first if the swap
device is a different one from the target entry.
Link: https://lkml.kernel.org/r/20251111-swap-fix-vma-uaf-v1-1-41c660e58562@tencent.com Fixes: 78524b05f1a3 ("mm, swap: avoid redundant swap device pinning") Suggested-by: Huang Ying <ying.huang@linux.alibaba.com> Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently mremap folio pte batch ignores the writable bit during figuring
out a set of similar ptes mapping the same folio. Suppose that the first
pte of the batch is writable while the others are not - set_ptes will end
up setting the writable bit on the other ptes, which is a violation of
mremap semantics. Therefore, use FPB_RESPECT_WRITE to check the writable
bit while determining the pte batch.
Link: https://lkml.kernel.org/r/20251028063952.90313-1-dev.jain@arm.com Signed-off-by: Dev Jain <dev.jain@arm.com> Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching") Reported-by: David Hildenbrand <david@redhat.com> Debugged-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Pedro Falcato <pfalcato@suse.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Barry Song <baohua@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [6.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
