Merge tag 'erofs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"We now support metadata compression. It can be useful for embedded use
cases or archiving a large number of small files.
Additionally, readdir performance has been improved by enabling
readahead (note that it was already common practice for ext3/4 non-dx
and f2fs directories). We may consider further improvements later to
align with ext4's s_inode_readahead_blks behavior for slow devices
too.
The remaining commits are minor.
Summary:
- Add support for metadata compression
- Enable readahead for directories to improve readdir performance
- Minor fixes and cleanups"
* tag 'erofs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support to readahead dirent blocks in erofs_readdir()
erofs: implement metadata compression
erofs: add on-disk definition for metadata compression
erofs: fix build error with CONFIG_EROFS_FS_ZIP_ACCEL=y
erofs: remove ENOATTR definition
erofs: refine erofs_iomap_begin()
erofs: unify meta buffers in z_erofs_fill_inode()
erofs: remove need_kmap in erofs_read_metabuf()
erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()
erofs: get rid of {get,put}_page() for ztailpacking data
Merge tag 'ntfs3_for_6.17' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Added:
- sanity check for file name
- mark live inode as bad and avoid any operations
Fixed:
- handling of symlinks created in windows
- creation of symlinks for relative path
Changed:
- cancel setting inode as bad after removing name fails
- revert 'replace inode_trylock with inode_lock'"
* tag 'ntfs3_for_6.17' of https://github.com/Paragon-Software-Group/linux-ntfs3:
Revert "fs/ntfs3: Replace inode_trylock with inode_lock"
fs/ntfs3: Exclude call make_bad_inode for live nodes.
fs/ntfs3: cancle set bad inode after removing name fails
fs/ntfs3: Add sanity check for file name
fs/ntfs3: correctly create symlink for relative path
fs/ntfs3: fix symlinks cannot be handled correctly
Merge tag 'for-6.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A number of usability and feature updates, scattered performance
improvements and fixes. Highlight of the core changes is getting
closer to enabling large folios (now behind a config option).
User visible changes:
- update defrag ioctl, add new flag to request no compression on
existing extents
- restrict writes to block devices after mount
- in experimental config, enable large folios for data, almost
complete but not widely tested
- add stats tracking duration of critical section in transaction
commit to /sys/fs/btrfs/FSID/commit_stats
Performance improvements:
- caching of lookup results of free space bitmap (20% runtime
improvement on an empty file creation benchmark)
- accessors to metadata (b-tree items) simplified and optimized,
minor improvement in metadata-heavy workloads
- readahead on compressed data improves sequential read
- the xarray for extent buffers is indexed by denser keys, leading to
better packing of the nodes (50-70% reduction of leaf nodes)
Notable fixes:
- stricter compression mount option parsing
- send properly emits fallocate command for file holes when protocol
v2 is used
- fix overallocation of chunks with mount option 'ssd_spread', due to
interaction with size classes not finding the right chunk
(workaround: manual reclaim by 'usage' balance filter)
- various quota enable/disable races with rescan, more verbose
notifications about inconsistent state
- populate otime in tree-log during log replay
- handle ENOSPC when NOCOW file is used with mmap()
Core:
- large data folios enabled in experimental config
- in zoned mode, allocate reloc block group on mount to make sure
there's always one available for zone reclaim under heavy load
- rework device opening, they're always open as read-only and delayed
until the super block is created, allowing the restricted writes
after mount
- preparatory work for adding blk_holder_ops, allowing device
freeze/thaw in the future
Cleanups, refactoring:
- type and naming unifications (int/bool, return variables)
- rb-tree helper refactoring and simplifications
- reorder memory allocations to less critical places
- RCU string (used for device name) refactoring and API removal
- replace all remaining use of strcpy()"
* tag 'for-6.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (209 commits)
btrfs: send: use fallocate for hole punching with send stream v2
btrfs: unfold transaction aborts when writing dirty block groups
btrfs: use saner variable type and name to indicate extrefs at add_inode_ref()
btrfs: don't skip remaining extrefs if dir not found during log replay
btrfs: don't ignore inode missing when replaying log tree
btrfs: enable large data folios for data reloc inode
btrfs: output more info when btrfs_subpage_assert() failed
btrfs: reloc: unconditionally invalidate the page cache for each cluster
btrfs: defrag: add flag to force no-compression
btrfs: fix ssd_spread overallocation
btrfs: zoned: requeue to unused block group list if zone finish failed
btrfs: zoned: do not remove unwritten non-data block group
btrfs: remove btrfs_clear_extent_bits()
btrfs: use cached state when falling back from NOCoW write to CoW write
btrfs: set EXTENT_NORESERVE before range unlock in btrfs_truncate_block()
btrfs: don't print relocation messages from auto reclaim
btrfs: remove redundant auto reclaim log message
btrfs: make btrfs_check_nocow_lock() check more than one extent
btrfs: assert we can NOCOW the range in btrfs_truncate_block()
btrfs: update function comment for btrfs_check_nocow_lock()
...
Merge tag 'timers-urgent-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the PTP systemcounter mechanism:
The rework of this mechanism added a 'use_nsec' member to struct
system_counterval. get_device_system_crosststamp() instantiates that
struct on the stack and hands a pointer to the driver callback.
Only the drivers which set use_nsec to true, initialize that field,
but all others ignore it. As get_device_system_crosststamp() does not
initialize the struct, the use_nsec field contains random stack
content in those cases. That causes a miscalulation usually resulting
in a failing range check in the best case.
Initialize the structure before handing it to the drivers to cure
that"
* tag 'timers-urgent-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Zero initialize system_counterval when querying time from phc drivers
Merge tag 'i2c-for-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- qup: avoid potential hang when waiting for bus idle
- tegra: improve ACPI reset error handling
- virtio: use interruptible wait to prevent hang during transfer
* tag 'i2c-for-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qup: jump out of the loop in case of timeout
i2c: virtio: Avoid hang by using interruptible completion wait
i2c: tegra: Fix reset error handling with ACPI
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fixes from Russell King:
- use an absolute path for asm/unified.h in KBUILD_AFLAGS to solve a
regression caused by commit d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target")
- fix dead code elimination binutils version check again
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9450/1: Fix allowing linker DCE with binutils < 2.36
ARM: 9448/1: Use an absolute path to unified.h in KBUILD_AFLAGS
Merge tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are two fixes that came in late, one addresses a regression on a
rockchips based board, the other is for ensuring a consistent dt
binding for a device added in 6.16 before the incorrect one makes it
into a release"
* tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
arm64: dts: allwinner: a523: Rename emac0 to gmac0
Wolfram Sang [Fri, 25 Jul 2025 22:59:39 +0000 (00:59 +0200)]
Merge tag 'i2c-host-fixes-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc8
qup: avoid potential hang when waiting for bus idle
tegra: improve ACPI reset error handling
virtio: use interruptible wait to prevent hang during transfer
Merge tag 'drm-fixes-2025-07-26' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes (part 2) from Dave Airlie:
"Just the follow up fixes for i915 and xe, all pretty minor.
i915:
- Fix DP 2.7 Gbps DP_LINK_BW value on g4x
- Fix return value on intel_atomic_commit_fence_wait
xe:
- Fix build without debugfs"
* tag 'drm-fixes-2025-07-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Fix build without debugfs
drm/i915/display: Fix dma_fence_wait_timeout() return value handling
drm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4x
Merge tag 'vfs-6.16-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two last-minute fixes for this cycle:
- Set afs vllist to NULL if addr parsing fails
- Add a missing check for reaching the end of the string in afs"
* tag 'vfs-6.16-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Set vllist to NULL if addr parsing fails
afs: Fix check for NULL terminator
Merge tag 'bcachefs-2025-07-24' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"User reported fixes:
- Fix btree node scan on encrypted filesystems by not using btree
node header fields encrypted
- Fix a race in btree write buffer flush; this caused EROs primarily
during fsck for some people"
* tag 'bcachefs-2025-07-24' of git://evilpiepirate.org/bcachefs:
bcachefs: Add missing snapshots_seen_add_inorder()
bcachefs: Fix write buffer flushing from open journal entry
bcachefs: btree_node_scan: don't re-read before initializing found_btree_node
ARM: 9450/1: Fix allowing linker DCE with binutils < 2.36
Commit e7607f7d6d81 ("ARM: 9443/1: Require linker to support KEEP within
OVERLAY for DCE") accidentally broke the binutils version restriction
that was added in commit 0d437918fb64 ("ARM: 9414/1: Fix build issue
with LD_DEAD_CODE_DATA_ELIMINATION"), reintroducing the segmentation
fault addressed by that workaround.
Restore the binutils version dependency by using
CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY as an additional condition to ensure
that CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION is only enabled with
binutils >= 2.36 and ld.lld >= 21.0.0.
Closes: https://lore.kernel.org/6739da7d-e555-407a-b5cb-e5681da71056@landley.net/ Closes: https://lore.kernel.org/CAFERDQ0zPoya5ZQfpbeuKVZEo_fKsonLf6tJbp32QnSGAtbi+Q@mail.gmail.com/ Cc: stable@vger.kernel.org Fixes: e7607f7d6d81 ("ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE") Reported-by: Rob Landley <rob@landley.net> Tested-by: Rob Landley <rob@landley.net> Reported-by: Martin Wetterwald <martin@wetterwald.eu> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
ARM: 9448/1: Use an absolute path to unified.h in KBUILD_AFLAGS
After commit d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper
flags and language target"), which updated as-instr to use the
'assembler-with-cpp' language option, the Kbuild version of as-instr
always fails internally for arch/arm with
<command-line>: fatal error: asm/unified.h: No such file or directory
compilation terminated.
because '-include' flags are now taken into account by the compiler
driver and as-instr does not have '$(LINUXINCLUDE)', so unified.h is not
found.
This went unnoticed at the time of the Kbuild change because the last
use of as-instr in Kbuild that arch/arm could reach was removed in 5.7
by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support") but a
stable backport of the Kbuild change to before that point exposed this
potential issue if one were to be reintroduced.
Follow the general pattern of '-include' paths throughout the tree and
make unified.h absolute using '$(srctree)' to ensure KBUILD_AFLAGS can
be used independently.
Closes: https://lore.kernel.org/CACo-S-1qbCX4WAVFA63dWfHtrRHZBTyyr2js8Lx=Az03XHTTHg@mail.gmail.com/ Cc: stable@vger.kernel.org Fixes: d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper flags and language target") Reported-by: KernelCI bot <bot@kernelci.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Kent Overstreet [Tue, 22 Jul 2025 03:41:50 +0000 (23:41 -0400)]
bcachefs: Fix write buffer flushing from open journal entry
When flushing the btree write buffer, we pull write buffer keys directly
from the journal instead of letting the journal write path copy them to
the write buffer.
When flushing from the currently open journal buffer, we have to block
new reservations and wait for outstanding reservations to complete.
Recheck the reservation state after blocking new reservations:
previously, we were checking the reservation count from before calling
__journal_block().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Merge tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
Stephen Rothwell [Mon, 21 Jul 2025 06:15:57 +0000 (16:15 +1000)]
sprintf.h requires stdarg.h
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au Fixes: 39ced19b9e60 ("lib/vsprintf: split out sprintf() and friends") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Sat, 19 Jul 2025 11:26:04 +0000 (20:26 +0900)]
resource: fix false warning in __request_region()
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com Fixes: 7dab174e2e27 ("dax/hmem: Move hmem device registration to dax_hmem.ko") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sat, 19 Jul 2025 18:19:32 +0000 (11:19 -0700)]
mm/damon/core: commit damos_quota_goal->nid
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org Fixes: 0e1c773b501f ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x] Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'pci-v6.16-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Create pwrctrl devices only when we need them, i.e., when
CONFIG_PCI_PWRCTRL is enabled.
This allows brcmstb to work around a pwrctrl regression by
disabling CONFIG_PCI_PWRCTRL (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Create pwrctrl devices only when CONFIG_PCI_PWRCTRL is enabled
Lucas De Marchi [Tue, 22 Jul 2025 19:52:08 +0000 (12:52 -0700)]
drm/xe: Fix build without debugfs
When CONFIG_DEBUG_FS is off, drivers/gpu/drm/xe/xe_gt_debugfs.o
is not built and build fails on some setups with:
ld: drivers/gpu/drm/xe/xe_gt.o: in function `xe_fault_inject_gt_reset':
drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1659): undefined reference to `gt_reset_failure'
ld: drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1c16): undefined reference to `gt_reset_failure'
collect2: error: ld returned 1 exit status
Do not use the gt_reset_failure attribute if debugfs is not enabled.
Fixes: 8f3013e0b222 ("drm/xe: Introduce fault injection for gt reset") Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://lore.kernel.org/r/20250722-xe-fix-build-fault-v1-1-157384d50987@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4d3bbe9dd28c0a4ca119e4b8823c5f5e9cb3ff90) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Merge tag 'sound-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Some last-minute fixes. All changes are device-specific small fixes or
quirks, safe to apply"
* tag 'sound-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: mediatek: common: fix device and OF node leak
ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
ALSA: usb-audio: qcom: Adjust mutex unlock order
ASoC: SDCA: correct the calculation of the maximum init table size
ASoC: rt5650: Eliminate the high frequency glitch
ASoC: SOF: Intel: PTL: Add the sdw_process_wakeen op
ALSA: hda/realtek - Add mute LED support for HP Pavilion 15-eg0xxx
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa0xxx
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two important arm64 fixes ahead of the 6.16 release.
The first fixes a regression introduced during the merge window where
the KVM UUID (which is used to advertise KVM-specific hypercalls for
things like time synchronisation in the guest) was corrupted thanks to
an endianness bug introduced when converting the code to use the
UUID_INIT() helper.
The second fixes a stack-pointer corruption issue during
context-switch which has been observed in the wild when taking a
pseudo-NMI with shadow call stack enabled.
Summary:
- Fix broken UUID value for the KVM/arm64 hypervisor SMCCC interface
- Fix stack corruption on context-switch, primarily seen on (but not
limited to) configurations with both pNMI and SCS enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
arm64: kvm, smccc: Fix vendor uuid
Merge tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and xfrm.
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth:
- mlx5: fix memory leak in cmd_exec()
- i40e: when removing VF MAC filters, avoid losing PF-set MAC
- gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth:
- ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- ism: fix concurrency management in ism_cmd()
- dpaa2: fix device reference count leak in MAC endpoint handling
- icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage"
* tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
net: hns3: default enable tx bounce buffer when smmu enabled
net: hns3: fixed vf get max channels bug
net: hns3: disable interrupt when ptp init failed
net: hns3: fix concurrent setting vlan filter issue
s390/ism: fix concurrency management in ism_cmd()
selftests: drv-net: wait for iperf client to stop sending
MAINTAINERS: Add in6.h to MAINTAINERS
selftests: netfilter: tone-down conntrack clash test
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
gve: Fix stuck TX queue for DQ queue format
net: appletalk: Fix use-after-free in AARP proxy probe
net: bcmasp: Restore programming of TX map vector register
selftests: mptcp: connect: also cover checksum
selftests: mptcp: connect: also cover alt modes
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
...
Meanwhile, let's introduces a new sysfs entry to control readahead
bytes to provide more flexible policy for readahead of readdir().
- location: /sys/fs/erofs/<disk>/dir_ra_bytes
- default value: 16384
- disable readahead: set the value to 0
Thanks to the meta buffer infrastructure, metadata-compressed inodes are
just read from the metabox inode instead of the blockdevice (or backing
file) inode.
The same is true for shared extended attributes.
When metadata compression is enabled, inode numbers are divided from
on-disk NIDs because of non-LTS 32-bit application compatibility.
erofs: add on-disk definition for metadata compression
Filesystem metadata has a high degree of redundancy, so it should
compress well in the general case.
Although metadata compression can increase overall I/O latency, many
users care more about minimized image sizes than extreme runtime
performance. Let's implement metadata compression in response to user
requests [1].
Actually, it's quite simple to implement metadata compression: since
EROFS already supports per-inode compression, we can simply treat a
special inode (called `the metabox inode`) as a container for compressed
inode metadata. Since EROFS supports multiple algorithms, users can
even specify LZ4 for metadata and LZMA for data.
To better support incremental builds, the MSB of NIDs indicates where
the inode metadata is located: if bit 63 is set, the inode itself should
be read from `the metabox inode`.
Optionally, shared xattrs can also be kept in `the metabox inode` if
COMPAT_SHARED_EA_IN_METABOX is set.
erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()
All below functions will do sanity check on m->type, let's move sanity
check to z_erofs_load_compact_lcluster() for cleanup.
- z_erofs_map_blocks_fo
- z_erofs_get_extent_compressedlen
- z_erofs_get_extent_decompressedlen
- z_erofs_extent_lookback
1) Premption fixes for xfrm_state_find.
From Sabrina Dubroca.
2) Initialize offload path also for SW IPsec GRO. This fixes a
performance regression on SW IPsec offload.
From Leon Romanovsky.
3) Fix IPsec UDP GRO for IKE packets.
From Tobias Brunner,
4) Fix transport header setting for IPcomp after decompressing.
From Fernando Fernandez Mancera.
5) Fix use-after-free when xfrmi_changelink tries to change
collect_md for a xfrm interface.
From Eyal Birger .
6) Delete the special IPcomp x->tunnel state along with the state x
to avoid refcount problems.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "xfrm: destroy xfrm_state synchronously on net exit path"
xfrm: delete x->tunnel as we delete x
xfrm: interface: fix use-after-free after changing collect_md xfrm interface
xfrm: ipcomp: adjust transport header after decompressing
xfrm: Set transport header to fix UDP GRO handling
xfrm: always initialize offload path
xfrm: state: use a consistent pcpu_id in xfrm_state_find
xfrm: state: initialize state_ptrs earlier in xfrm_state_find
====================
net: hns3: default enable tx bounce buffer when smmu enabled
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the queried maximum of vf channels is the maximum of channels
supported by each TC. However, the actual maximum of channels is
the maximum of channels supported by the device.
Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The vport->req_vlan_fltr_en may be changed concurrently by function
hclge_sync_vlan_fltr_state() called in periodic work task and
function hclge_enable_vport_vlan_filter() called by user configuration.
It may cause the user configuration inoperative. Fixes it by protect
the vport->req_vlan_fltr by vport_lock.
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Halil Pasic [Tue, 22 Jul 2025 16:18:17 +0000 (18:18 +0200)]
s390/ism: fix concurrency management in ism_cmd()
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com> Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This might just be part one, but I'm sending it a bit early as it has
two sets of reverts for regressions, one is all the gem/dma-buf
handling and another was a nouveau ioctl change.
Otherwise there is an amdgpu fix, nouveau fix and a scheduler fix.
If any other changes come in I'll follow up with another more usual
Fri/Sat MR.
gem:
- revert all the dma-buf/gem changes as there as lifetime issues
with them
nouveau:
- revert an ioctl change as it causes issues
- fix NULL ptr on fermi
bridge:
- remove extra semicolon
sched:
- remove hang causing optimisation
amdgpu:
- fix garbage in cleared vram after resume"
* tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()
Revert "drm/nouveau: check ioctl command codes better"
drm/nouveau/nvif: fix null ptr deref on pre-fermi boards
Revert "drm/gem-dma: Use dma_buf from GEM object instance"
Revert "drm/gem-shmem: Use dma_buf from GEM object instance"
Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance"
Revert "drm/prime: Use dma_buf from GEM object instance"
Revert "drm/etnaviv: Use dma_buf from GEM object instance"
Revert "drm/vmwgfx: Use dma_buf from GEM object instance"
Revert "drm/virtio: Use dma_buf from GEM object instance"
drm/sched: Remove optimization that causes hang when killing dependent jobs
drm/amdgpu: Reset the clear flag in buddy during resume
selftests: drv-net: wait for iperf client to stop sending
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Yang Xiwen [Sun, 15 Jun 2025 16:01:10 +0000 (00:01 +0800)]
i2c: qup: jump out of the loop in case of timeout
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.
Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1") Signed-off-by: Yang Xiwen <forbidden405@outlook.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com
Akhil R [Thu, 10 Jul 2025 13:12:04 +0000 (18:42 +0530)]
i2c: tegra: Fix reset error handling with ACPI
The acpi_evaluate_object() returns an ACPI error code and not
Linux one. For the some platforms the err will have positive code
which may be interpreted incorrectly. Use device_reset() for
reset control which handles it correctly.
Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Cc: <stable@vger.kernel.org> # v5.17+ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250710131206.2316-2-akhilrajeev@nvidia.com
My CC-adding automation returned nothing on a future patch to the
include/linux/in6.h file, and I went looking for why. Add the missed
in6.h to MAINTAINERS.
Manuel Andreas [Wed, 23 Jul 2025 15:51:20 +0000 (17:51 +0200)]
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
Fixes: 92c58965e965 ("KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly") Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
[Adjusted commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Airlie [Wed, 23 Jul 2025 20:49:38 +0000 (06:49 +1000)]
Merge tag 'drm-misc-fixes-2025-07-23' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc8/final?:
- Revert all uses of drm_gem_object->dmabuf to
drm_gem_object->import_attach->dmabuf.
- Fix amdgpu returning BIOS cluttered VRAM after resume.
- Scheduler hang fix.
- Revert nouveau ioctl fix as it caused regressions.
- Fix null pointer deref in nouveau.
- Fix unnecessary semicolon in ti_sn_bridge_probe.
Al Viro [Sun, 20 Jul 2025 20:43:53 +0000 (16:43 -0400)]
fix the regression in ufs options parsing
A really dumb braino on rebasing and a dumber fuckup with managing #for-next
Fixes: b70cb459890b ("ufs: convert ufs to the new mount API") Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
drm/i915/display: Fix dma_fence_wait_timeout() return value handling
dma_fence_wait_timeout returns a long type but the driver is
only using the lower 32 bits of the retval and discarding the
upper 32 bits.
This is particularly problematic if there are already signalled
or stub fences on some of the hw planes. In this case the
dma_fence_wait_timeout function will immediately return with
timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since
the fence is already signalled. If the driver only uses the lower
32 bits of this return value then it'll interpret it as an error
code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences.
This issue was first observed in the xe driver with the Android
compositor where the GPU composited layer was not properly waited
on when there were stub fences in other overlay planes resulting in
visual artifacts.
Fixes: d59cf7bb73f3c ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence") Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com
(cherry picked from commit cdb16039515a5ac4d2c923f7a651cf19a803a3fe) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
NAND devices with different page sizes requires different number
of ECC steps, yet the qcom_spi_ecc_init_ctx_pipelined() function
sets 4 steps in 'ecc_cfg' unconditionally.
The correct number of the steps is calculated earlier in the
function already, so use that instead of the hardcoded value.
Johan Hovold [Tue, 22 Jul 2025 09:25:42 +0000 (11:25 +0200)]
ASoC: mediatek: common: fix device and OF node leak
Make sure to drop the references to the accdet OF node and platform
device taken by of_parse_phandle() and of_find_device_by_node() after
looking up the sound component during probe.
Fixes: cf536e2622e2 ("ASoC: mediatek: common: Handle mediatek,accdet property") Cc: stable@vger.kernel.org # 6.15 Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20250722092542.32754-1-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this
issue.
Fixes: e2c2cb8ef07a ("afs: Simplify cell record handling") Reported-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5c042fbab0b292c98fc6 Tested-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/4119365.1753108011@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
Leo Stone [Mon, 21 Jul 2025 14:29:12 +0000 (15:29 +0100)]
afs: Fix check for NULL terminator
Add a missing check for reaching the end of the string while attempting
to split a command.
Fixes: f94f70d39cc2 ("afs: Provide a way to configure address priorities") Reported-by: syzbot+7741f872f3c53385a2e2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7741f872f3c53385a2e2 Signed-off-by: Leo Stone <leocstone@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/4119428.1753108152@warthog.procyon.org.uk Acked-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
selftests: netfilter: tone-down conntrack clash test
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case") Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Jul 2025 01:24:10 +0000 (18:24 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-21 (i40e, ice, e1000e)
For i40e:
Dennis Chen adjusts reporting of VF Tx dropped to a more appropriate
field.
Jamie Bainbridge fixes a check which can cause a PF set VF MAC address
to be lost.
For ice:
Haoxiang Li adds an error check in DDP load to prevent NULL pointer
dereference.
For e1000e:
Jacek Kowalski adds workarounds for issues surrounding Tiger Lake
platforms with uninitialized NVMs.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
====================
arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
Sometimes the netdev triggers causes tasks to get blocked for more then
120 seconds, which in turn makes the (WAN) network port on the NanoPi
R5S fail to come up.
This results in the following (partial) trace:
PCI/pwrctrl: Create pwrctrl devices only when CONFIG_PCI_PWRCTRL is enabled
If devicetree describes power supplies related to a PCI device, we
unnecessarily created a pwrctrl device even if CONFIG_PCI_PWRCTL was not
enabled.
We only need pci_pwrctrl_create_device() when CONFIG_PCI_PWRCTRL is
enabled. Compile it out when CONFIG_PCI_PWRCTRL is not enabled.
When pci_pwrctrl_create_device() creates and returns a pwrctrl device,
pci_scan_device() doesn't enumerate the PCI device. It assumes the pwrctrl
core will rescan the bus after turning on the power. However, if
CONFIG_PCI_PWRCTRL is not enabled, the rescan never happens, which breaks
PCI enumeration on any system that describes power supplies in devicetree
but does not use pwrctrl.
Jim reported that some brcmstb platforms break this way. The brcmstb
driver is still broken if CONFIG_PCI_PWRCTRL is enabled, but this commit at
least allows brcmstb to work when it's NOT enabled.
ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
this patch is to fix my previous Commit <e5182305a519> i have fixed mute
led but for by This patch corrects the coefficient mask value introduced
in commit <e5182305a519>, which was intended to enable the mute LED
functionality. During testing, multiple values were evaluated, and
an incorrect value was mistakenly included in the final commit.
This update fixes that error by applying the correct mask value for
proper mute LED behavior.
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org> Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Reported-by: Cristian Prundeanu <cpru@amazon.com> Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt") Tested-by: Cristian Prundeanu <cpru@amazon.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Markus Blöchl [Sun, 20 Jul 2025 13:54:51 +0000 (15:54 +0200)]
timekeeping: Zero initialize system_counterval when querying time from phc drivers
Most drivers only populate the fields cycles and cs_id of system_counterval
in their get_time_fn() callback for get_device_system_crosststamp(), unless
they explicitly provide nanosecond values.
When the use_nsecs field was added to struct system_counterval, most
drivers did not care. Clock sources other than CSID_GENERIC could then get
converted in convert_base_to_cs() based on an uninitialized use_nsecs field,
which usually results in -EINVAL during the following range check.
Pass in a fully zero initialized system_counterval_t to cure that.
My previous patch ended up causing a regression for the
DRM_IOCTL_NOUVEAU_NVIF ioctl. The intention of my patch was to only
pass ioctl commands that have the correct dir/type/nr bits into the
nouveau_abi16_ioctl() function.
This turned out to be too strict, as userspace does use at least
write-only and write-read direction settings. Checking for both of these
still did not fix the issue, so the best we can do for the 6.16 release
is to revert back to what we've had since linux-3.16.
This version is still fragile, but at least it is known to work with
existing userspace. Fixing this properly requires a better understanding
of what commands are being passed from userspace in practice, and how
that relies on the undocumented (miss)behavior in nouveau_drm_ioctl().
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
Andrei Lalaev reported a NULL pointer deref when a CAN device is
restarted from Bus Off and the driver does not implement the struct
can_priv::do_set_mode callback.
There are 2 code path that call struct can_priv::do_set_mode:
- directly by a manual restart from the user space, via
can_changelink()
- delayed automatic restart after bus off (deactivated by default)
To prevent the NULL pointer deference, refuse a manual restart or
configure the automatic restart delay in can_changelink() and report
the error via extack to user space.
As an additional safety measure let can_restart() return an error if
can_priv::do_set_mode is not set instead of dereferencing it
unchecked.
Xiang Mei [Thu, 17 Jul 2025 23:01:28 +0000 (16:01 -0700)]
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
might_sleep could be trigger in the atomic context in qfq_delete_class.
qfq_destroy_class was moved into atomic context locked
by sch_tree_lock to avoid a race condition bug on
qfq_aggregate. However, might_sleep could be triggered by
qfq_destroy_class, which introduced sleeping in atomic context (path:
qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key
->might_sleep).
Considering the race is on the qfq_aggregate objects, keeping
qfq_rm_from_agg in the lock but moving the left part out can solve
this issue.
The mutexes qdev_mutex and chip->mutex are acquired in that order
throughout the driver. To preserve proper lock hierarchy and avoid
potential deadlocks, they must be released in the reverse
order of acquisition.
This change reorders the unlock sequence to first release chip->mutex
followed by qdev_mutex, ensuring consistency with the locking pattern.
[ fixed the code indentations and Fixes tag by tiwai ]
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: appletalk: Fix use-after-free in AARP proxy probe
The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
net: bcmasp: Restore programming of TX map vector register
On ASP versions v2.x we need to program the TX map vector register to
properly exercise end-to-end flow control, otherwise the TX engine can
either lock-up, or cause the hardware calculated checksum to be
wrong/corrupted when multiple back to back packets are being submitted
for transmission. This register defaults to 0, which means no flow
control being applied.
Filipe Manana [Fri, 18 Jul 2025 12:07:29 +0000 (13:07 +0100)]
btrfs: send: use fallocate for hole punching with send stream v2
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001 CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
====================
selftests: mptcp: connect: cover alt modes
mptcp_connect.sh can be executed manually with "-m <MODE>" and "-C" to
make sure everything works as expected when using "mmap" and "sendfile"
modes instead of "poll", and with the MPTCP checksum support.
These modes should be validated, but they are not when the selftests are
executed via the kselftest helpers. It means that most CIs validating
these selftests, like NIPA for the net development trees and LKFT for
the stable ones, are not covering these modes.
To fix that, new test programs have been added, simply calling
mptcp_connect.sh with the right parameters.
The first patch can be backported up to v5.6, and the second one up to
v5.14.
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Filipe Manana [Fri, 18 Jul 2025 17:14:40 +0000 (18:14 +0100)]
btrfs: unfold transaction aborts when writing dirty block groups
We have a single transaction abort call that can be due to an error from
one of two calls to update_block_group_item(). Unfold the transaction
abort calls so that if they happen we know which update_block_group_item()
call failed.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 11 Jul 2025 19:59:36 +0000 (20:59 +0100)]
btrfs: use saner variable type and name to indicate extrefs at add_inode_ref()
We are using a variable named 'log_ref_ver' of type int to indicate if we
are processing an extref item or not, using a value of 1 if so, otherwise
0. This is an odd name and type, so rename it to 'is_extref_item' and
change its type to bool.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 11 Jul 2025 19:48:23 +0000 (20:48 +0100)]
btrfs: don't skip remaining extrefs if dir not found during log replay
During log replay, at add_inode_ref(), if we have an extref item that
contains multiple extrefs and one of them points to a directory that does
not exist in the subvolume tree, we are supposed to ignore it and process
the remaining extrefs encoded in the extref item, since each extref can
point to a different parent inode. However when that happens we just
return from the function and ignore the remaining extrefs.
The problem has been around since extrefs were introduced, in commit f186373fef00 ("btrfs: extended inode refs"), but it's hard to hit in
practice because getting extref items encoding multiple extref requires
getting a hash collision when computing the offset of the extref's
key. The offset if computed like this:
Filipe Manana [Fri, 11 Jul 2025 19:21:28 +0000 (20:21 +0100)]
btrfs: don't ignore inode missing when replaying log tree
During log replay, at add_inode_ref(), we return -ENOENT if our current
inode isn't found on the subvolume tree or if a parent directory isn't
found. The error comes from btrfs_iget_logging() <- btrfs_iget() <-
btrfs_read_locked_inode().
The single caller of add_inode_ref(), replay_one_buffer(), ignores an
-ENOENT error because it expects that error to mean only that a parent
directory wasn't found and that is ok.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during
log replay") we were converting any error when getting a parent directory
to -ENOENT and any error when getting the current inode to -EIO, so our
caller would fail log replay in case we can't find the current inode.
After that commit however in case the current inode is not found we return
-ENOENT to the caller and therefore it ignores the critical fact that the
current inode was not found in the subvolume tree.
Fix this by converting -ENOENT to 0 when we don't find a parent directory,
returning -ENOENT when we don't find the current inode and making the
caller, replay_one_buffer(), not ignore -ENOENT anymore.
Fixes: 5f61b961599a ("btrfs: fix inode lookup error handling during log replay") CC: stable@vger.kernel.org # 6.16 Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: enable large data folios for data reloc inode
For data reloc inodes, they are a special type of inodes that are not
exposed to user space, and are only utilized during data block groups
relocation.
They do not go under regular read-write operations, but have their file
extents manually created to have the same layout of a block group, then
its content is read from the original block group, and written back to
the new location which is in a new block group.
Previously all the handling was done in page units, and commit c2832898126f ("btrfs: make relocate_one_page() handle subpage case")
changed the handling to subpage blocks.
On the other hand, data reloc inodes are a perfect match for large data
folios, as each relocation cluster represents one or more data extents
that are contiguous in their logical addresses.
This patch enables large folios for data reloc inodes by:
- Remove the special handling of data reloc inodes when setting folio
order
- Change relocate_one_folio() to return the file offset of the next
folio
Originally it's designed to handle fixed page sized blocks, but with
large folios, we can handle a large folio, thus we have to return the
end of the current folio.
- Remove the warning on folio_order()
- Use folio_size() to replace fixed PAGE_SIZE usage
- Use file_offset as iterator inside relocate_file_extent_cluster
Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: output more info when btrfs_subpage_assert() failed
The function btrfs_subpage_assert() is a very commonly utilized assert
to make sure the range passed in is correct inside the folio.
And when some code is not properly subpage/large folio compatible
btrfs_subpage_assert() will be the first to be triggered.
E.g. when I incorrectly enabled large folios for data reloc inodes, it
immediately triggered btrfs_subpage_assert().
In that case, outputting all the involved members will be very helpful,
this includes:
- start
- len
- folio position inside the mapping
- folio size
Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: reloc: unconditionally invalidate the page cache for each cluster
Commit 9d9ea1e68a05 ("btrfs: subpage: fix relocation potentially
overwriting last page data") fixed a bug when relocating data block
groups for subpage cases.
However for the incoming large folios for data reloc inode, we can hit
the same situation where block size is the same as page size, but the
folio we got is still larger than a block.
In that case, the old subpage specific check is no longer reliable.
Here we have to enhance the handling by:
- Unconditionally invalidate the page cache for the current cluster
We set the @flush to true so that any dirty folios are properly
written back first.
And this time instead of dropping the whole page cache, just drop the
range covered by the current cluster.
This will bring some minor performance drop, as for a large folio, the
heading half will be read twice (read by previous cluster, then
invalidated, then read again by the current cluster).
However that is required to support large folios, and this gets rid of
the kinda tricky manual uptodate flag clearing for each block.
- Remove the special handling of writing back the whole page cache
filemap_invalidate_inode() handles the write back already, and since
we're invalidating all pages in the range, we no longer need to
manually clear the uptodate flags for involved blocks.
Thus there is no need to manually write back the whole page cache.
Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 9 Jul 2025 14:29:17 +0000 (16:29 +0200)]
btrfs: defrag: add flag to force no-compression
Currently the defrag ioctl cannot rewrite the extents without
compression. Add a new flag for that, as setting compression to 0 (or
"no compression") means to do no changes to compression so take what is
the current default, like mount options or properties.
The defrag setting overrides mount or properties. The compression
BTRFS_DEFRAG_DONT_COMPRESS is only used for in-memory operations and
does not need to have a fixed value.
Mount with zstd:9, copy test file from /usr/bin/ (about 260KB):
$ mount -o compress=zstd:9 /dev/vda /mnt
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13364.. 13491: 128: 13440: encoded
2: 256.. 291: 13424.. 13459: 36: 13492: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 42% 124K 292K 292K
zstd 42% 124K 292K 292K
Defrag to uncompressed:
$ btrfs fi defrag --nocomp testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 291: 291840.. 292131: 292: last,eof
testfile: 1 extent found
$ compsize testfile
Processed 1 file, 1 regular extents (1 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 100% 292K 292K 292K
none 100% 292K 292K 292K
Compress again with LZO:
$ btrfs fi defrag -clzo testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13392.. 13519: 128: 13440: encoded
2: 256.. 291: 13480.. 13515: 36: 13520: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 64% 188K 292K 292K
lzo 64% 188K 292K 292K
Boris Burkov [Mon, 14 Jul 2025 23:44:28 +0000 (16:44 -0700)]
btrfs: fix ssd_spread overallocation
If the ssd_spread mount option is enabled, then we run the so called
clustered allocator for data block groups. In practice, this results in
creating a btrfs_free_cluster which caches a block_group and borrows its
free extents for allocation.
Since the introduction of allocation size classes in 6.1, there has been
a bug in the interaction between that feature and ssd_spread.
find_free_extent() has a number of nested loops. The loop going over the
allocation stages, stored in ffe_ctl->loop and managed by
find_free_extent_update_loop(), the loop over the raid levels, and the
loop over all the block_groups in a space_info. The size class feature
relies on the block_group loop to ensure it gets a chance to see a
block_group of a given size class. However, the clustered allocator
uses the cached cluster block_group and breaks that loop. Each call to
do_allocation() will really just go back to the same cached block_group.
Normally, this is OK, as the allocation either succeeds and we don't
want to loop any more or it fails, and we clear the cluster and return
its space to the block_group.
But with size classes, the allocation can succeed, then later fail,
outside of do_allocation() due to size class mismatch. That latter
failure is not properly handled due to the highly complex multi loop
logic. The result is a painful loop where we continue to allocate the
same num_bytes from the cluster in a tight loop until it fails and
releases the cluster and lets us try a new block_group. But by then, we
have skipped great swaths of the available block_groups and are likely
to fail to allocate, looping the outer loop. In pathological cases like
the reproducer below, the cached block_group is often the very last one,
in which case we don't perform this tight bg loop but instead rip
through the ffe stages to LOOP_CHUNK_ALLOC and allocate a chunk, which
is now the last one, and we enter the tight inner loop until an
allocation failure. Then allocation succeeds on the final block_group
and if the next allocation is a size mismatch, the exact same thing
happens again.
Triggering this is as easy as mounting with -o ssd_spread and then
running:
if you do the two writes + sync in a loop, you can force btrfs to spin
an excessive amount on semi-successful clustered allocations, before
ultimately failing and advancing to the stage where we force a chunk
allocation. This results in 2G of data allocated per iteration, despite
only using ~20M of data. By using a small size classed extent, the inner
loop takes longer and we can spin for longer.
The simplest, shortest term fix to unbreak this is to make the clustered
allocator size_class aware in the dumbest way, where it fails on size
class mismatch. This may hinder the operation of the clustered
allocator, but better hindered than completely broken and terribly
overallocating.
Further re-design improvements are also in the works.
Fixes: 52bb7a2166af ("btrfs: introduce size class to block group allocator") CC: stable@vger.kernel.org # 6.1+ Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
Naohiro Aota [Sun, 29 Jun 2025 14:07:42 +0000 (23:07 +0900)]
btrfs: zoned: do not remove unwritten non-data block group
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 11 Jul 2025 08:46:16 +0000 (09:46 +0100)]
btrfs: remove btrfs_clear_extent_bits()
It's just a simple wrapper around btrfs_clear_extent_bit() that passes a
NULL for its last argument (a cached extent state record), plus there is
not counter part - we have a btrfs_set_extent_bit() but we do not have a
btrfs_set_extent_bits() (plural version). So just remove it and make all
callers use btrfs_clear_extent_bit() directly.
Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 11 Jul 2025 08:23:09 +0000 (09:23 +0100)]
btrfs: use cached state when falling back from NOCoW write to CoW write
We have a cached extent state record from the previous extent locking so
we can use when setting the EXTENT_NORESERVE in the range, allowing the
operation to be faster if the extent io tree is relatively large.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 8 Jul 2025 15:32:33 +0000 (16:32 +0100)]
btrfs: set EXTENT_NORESERVE before range unlock in btrfs_truncate_block()
Set the EXTENT_NORESERVE bit in the io tree before unlocking the range so
that we can use the cached state and speedup the operation, since the
unlock operation releases the cached state.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: don't print relocation messages from auto reclaim
When BTRFS is doing automatic block-group reclaim, it is spamming the
kernel log messages a lot.
Add a 'verbose' parameter to btrfs_relocate_chunk() and
btrfs_relocate_block_group() to control the verbosity of these log
message. This way the old behaviour of printing log messages on a
user-space initiated balance operation can be kept while excessive log
spamming due to auto reclaim is mitigated.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Remove the log message before reclaiming a chunk in
btrfs_reclaim_bgs_work(). Especially with automatic block-group
reclaiming these messages spam the kernel log.
Note there is also a tracepoint for the same condition to ease debugging.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
projects / thirdparty / linux.git / log
