When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-3-sj@kernel.org Fixes: c951cd3b8901 ("mm/damon: implement a minimal stub for sysfs-based DAMON interface") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 5.18.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/damon/sysfs: free setup failures generated zombie sub-sub
dirs".
Some DAMON sysfs directory setup functions generates its sub and sub-sub
directories. For example, 'monitoring_attrs/' directory setup creates
'intervals/' and 'intervals/intervals_goal/' directories under
'monitoring_attrs/' directory. When such sub-sub directories are
successfully made but followup setup is failed, the setup function should
recursively clean up the subdirectories.
However, such setup functions are only dereferencing sub directory
reference counters. As a result, under certain setup failures, the
sub-sub directories keep having non-zero reference counters. It means the
directories cannot be removed like zombies, and the memory for the
directories cannot be freed.
The user impact of this issue is limited due to the following reasons.
When the issue happens, the zombie directories are still taking the path.
Hence attempts to generate the directories again will fail, without
additional memory leak. This means the upper bound memory leak is
limited. Nonetheless this also implies controlling DAMON with a feature
that requires the setup-failed sysfs files will be impossible until the
system reboots.
Also, the setup operations are quite simple. The certain failures would
hence only rarely happen, and are difficult to artificially trigger.
This patch (of 4):
When attrs/ DAMON sysfs directory setup is failed after setup of
intervals/ directory, intervals/intervals_goal/ directory is not cleaned
up. As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-5-sj@kernel.org Fixes: 9bbb820a5bd5 ("mm/damon/sysfs: support DAMOS quotas") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 5.18.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
quotas/ directory, subdirectories of quotas/ directory are not cleaned up.
As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-4-sj@kernel.org Fixes: 1b32234ab087 ("mm/damon/sysfs: support DAMOS watermarks") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 5.18.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If damon_call() is executed against a DAMON context that is not running,
the function returns error while keeping the damon_call_control object
linked to the context's call_controls list. Let's suppose the object is
deallocated after the damon_call(), and yet another damon_call() is
executed against the same context. The function tries to add the new
damon_call_control object to the call_controls list, which still has the
pointer to the previous damon_call_control object, which is deallocated.
As a result, use-after-free happens.
This can actually be triggered using the DAMON sysfs interface. It is not
easily exploitable since it requires the sysfs write permission and making
a definitely weird file writes, though. Please refer to the report for
more details about the issue reproduction steps.
Fix the issue by making two changes. Firstly, move the final
kdamond_call() for cancelling all existing damon_call() requests from
terminating DAMON context to be done before the ctx->kdamond reset. This
makes any code that sees NULL ctx->kdamond can safely assume the context
may not access damon_call() requests anymore. Secondly, let damon_call()
to cleanup the damon_call_control objects that were added to the
already-terminated DAMON context, before returning the error.
When page isolation loops indefinitely during memory offline, reading
/proc/sys/vm/percpu_pagelist_high_fraction blocks on pcp_batch_high_lock,
causing hung task warnings.
Make procfs reads lock-free since percpu_pagelist_high_fraction is a
simple integer with naturally atomic reads, writers still serialize via
the mutex.
This prevents hung task warnings when reading the procfs file during
long-running memory offline operations.
[akpm@linux-foundation.org: add comment, per Michal] Link: https://lkml.kernel.org/r/aS_y9AuJQFydLEXo@tiehlicka Link: https://lkml.kernel.org/r/20251201060009.1420792-1-aboorvad@linux.ibm.com Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto_alloc_acomp_node() may return ERR_PTR(), but the fail path checks
only for NULL and can pass an error pointer to crypto_free_acomp(). Use
IS_ERR_OR_NULL() to only free valid acomp instances.
Link: https://lkml.kernel.org/r/20251231074638.2564302-1-pbutsykin@cloudlinux.com Fixes: 779b9955f643 ("mm: zswap: move allocations during CPU init outside the lock") Signed-off-by: Pavel Butsykin <pbutsykin@cloudlinux.com> Reviewed-by: SeongJae Park <sj@kernel.org> Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'numa_nodes_parsed' is defined in <asm/numa.h> but this file
is not included in mm/numa_memblks.c (build x86_64) so add this
to the incldues to fix the following sparse warning:
mm/numa_memblks.c:13:12: warning: symbol 'numa_nodes_parsed' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20260108101539.229192-1-ben.dooks@codethink.co.uk Fixes: 87482708210f ("mm: introduce numa_memblks") Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmsan_free_page() is called by the page allocator's free_pages_prepare()
during page freeing. Its job is to poison all the memory covered by the
page. It can be called with an order-0 page, a compound high-order page
or a non-compound high-order page. But page_size() only works for order-0
and compound pages. For a non-compound high-order page it will
incorrectly return PAGE_SIZE.
The implication is that the tail pages of a high-order non-compound page
do not get poisoned at free, so any invalid access while they are free
could go unnoticed. It looks like the pages will be poisoned again at
allocation time, so that would bookend the window.
Fix this by using the order parameter to calculate the size.
Link: https://lkml.kernel.org/r/20260104134348.3544298-1-ryan.roberts@arm.com Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit d2fe192348f9 (“nvme: only allow entering LIVE from CONNECTING
state”) disallows controller state transitions directly from RESETTING
to LIVE. However, the NVMe PCIe subsystem reset path relies on this
transition to recover the controller on PowerPC (PPC) systems.
On PPC systems, issuing a subsystem reset causes a temporary loss of
communication with the NVMe adapter. A subsequent PCIe MMIO read then
triggers EEH recovery, which restores the PCIe link and brings the
controller back online. For EEH recovery to proceed correctly, the
controller must transition back to the LIVE state.
Due to the changes introduced by commit d2fe192348f9 (“nvme: only allow
entering LIVE from CONNECTING state”), the controller can no longer
transition directly from RESETTING to LIVE. As a result, EEH recovery
exits prematurely, leaving the controller stuck in the RESETTING state.
Fix this by explicitly transitioning the controller state from RESETTING
to CONNECTING and then to LIVE. This satisfies the updated state
transition rules and allows the controller to be successfully recovered
on PPC systems following a PCIe subsystem reset.
Cc: stable@vger.kernel.org Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state") Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memory bandwidth calculation relies on reading the hardware counter
and measuring the delta between samples. To ensure accurate measurement,
the software reads the counter frequently enough to prevent it from
rolling over twice between reads.
The default Memory Bandwidth Monitoring (MBM) counter width is 24 bits.
Hygon CPUs provide a 32-bit width counter, but they do not support the
MBM capability CPUID leaf (0xF.[ECX=1]:EAX) to report the width offset
(from 24 bits).
Consequently, the kernel falls back to the 24-bit default counter width,
which causes incorrect overflow handling on Hygon CPUs.
Fix this by explicitly setting the counter width offset to 8 bits (resulting
in a 32-bit total counter width) for Hygon CPUs.
Hygon CPUs supporting Platform QoS features currently undergo partial resctrl
initialization through resctrl_cpu_detect() in the Hygon BSP init helper and
AMD/Hygon common initialization code. However, several critical data
structures remain uninitialized for Hygon CPUs in the following paths:
Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added
suspend support for the Renesas I2C driver and following this change
on RZ/G3E the following WARNING is seen on entering suspend ...
The warning is triggered because I2C transfers can still be attempted
while the controller is already suspended, due to inappropriate ordering
of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once
runtime PM disabled (in suspend_late()). During system resume, the I2C
controller will be available only after runtime PM is re-enabled
(in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is
still enabled. The I2C controller will remain available until the
suspend_noirq() callback (pm_runtime_force_suspend()) is called. During
resume, the I2C controller can be restored by the resume_noirq() callback
(pm_runtime_force_resume()). Finally, the resume() callback re-enables
autosuspend. As a result, the I2C controller can remain available until
the system enters suspend_noirq() and from resume_noirq().
Cc: stable@vger.kernel.org Fixes: 53326135d0e0 ("i2c: riic: Add suspend/resume support") Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ports are defined in the tcpc main node, fwnode_usb_role_switch_get()
returns an error, meaning usb_role_switch_get() (which would succeed)
never gets a chance to run as port->role_sw isn't NULL, causing a
regression on devices where this is the case.
Fix this by turning the NULL check into IS_ERR_OR_NULL(), so
usb_role_switch_get() can actually run and the device get properly probed.
The padding at the end of struct ext4_tune_sb_params is architecture
specific and in particular is different between x86-32 and x86-64,
since the __u64 member only enforces struct alignment on the latter.
This shows up as a new warning when test-building the headers with
-Wpadded:
include/linux/ext4.h:144:1: error: padding struct size to alignment boundary with 4 bytes [-Werror=padded]
All members inside the structure are naturally aligned, so the only
difference here is the amount of padding at the end. Make the padding
explicit, to have a consistent sizeof(struct ext4_tune_sb_params) of
232 on all architectures and avoid adding compat ioctl handling for
EXT4_IOC_GET_TUNE_SB_PARAM/EXT4_IOC_SET_TUNE_SB_PARAM.
This is an ABI break on x86-32 but hopefully this can go into 6.18.y early
enough as a fixup so no actual users will be affected. Alternatively, the
kernel could handle the ioctl commands for both sizes (232 and 228 bytes)
on all architectures.
Fixes: 04a91570ac67 ("ext4: implemet new ioctls to set and get superblock parameters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20251204101914.1037148-1-arnd@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Cc: stable@vger.kernel.org # 5.6 Cc: Srinivas Kandagatla <srini@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260102111413.9605-3-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Secondary temperature thresholds (temp2_{min,max}) were not reported
properly on this NVMe SSD. This resulted in an error while attempting to
read these values with sensors(1):
ERROR: Can't get value of subfeature temp2_min: I/O error
ERROR: Can't get value of subfeature temp2_max: I/O error
Add the device to the nvme_id_table with the
NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non-
composite temperature thresholds.
The vendor provides instructions to write "0403 bd90" to
/sys/bus/usb-serial/drivers/ftdi_sio/new_id; see:
https://picaxe.com/docs/picaxe_linux_instructions.pdf
Add support for Telit LE910 module when operating in MBIM composition
with additional ttys. This USB product ID is used by the module
when AT#USBCFG is set to 7.
0x1252: MBIM + tty(NMEA) + tty(MODEM) + tty(MODEM) + SAP
Commit 9beeee6584b9aa4f ("USB: EHCI: log a warning if ehci-hcd is not
loaded first") said that ehci-hcd should be loaded before ohci-hcd and
uhci-hcd. However, commit 05c92da0c52494ca ("usb: ohci/uhci - add soft
dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci-
pci, which is not enough and we may still see the warnings in boot log.
To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on
ehci-hcd. But Alan said that the warning introduced by 9beeee6584b9aa4f
is bogus, we only need the soft dependencies in the PCI level rather
than the HCD level.
However, there is really another neccessary soft dependencies between
ohci-platform/uhci-platform and ehci-platform, which is added by this
patch. The boot logs are below.
1. ohci-platform loaded before ehci-platform:
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1
ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb 1-4: new low-speed USB device number 2 using ohci-platform
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
usb 1-4: device descriptor read/all, error -62
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-4: new low-speed USB device number 3 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
2. ehci-platform loaded before ohci-platform:
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2
ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new low-speed USB device number 2 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
In the later case, there is no re-connection for USB-1.0/1.1 devices,
which is expected.
Synopsys renamed DWC_usb32 IP to DWC_usb4 as of IP version 1.30. No
functional change except checking for the IP_NAME here. The driver will
treat the new IP_NAME as if it's DWC_usb32. Additional features for USB4
will be introduced and checked separately.
(1) When the first time calculate req_payload_size for all the buffers,
reqs_per_frame = 0 will be the divisor of DIV_ROUND_UP(). So
the result is undefined.
This happens because VIDIOC_STREAMON is always executed after
VIDIOC_QBUF. So video->reqs_per_frame will be 0 until VIDIOC_STREAMON
is run.
(2) The buf->req_payload_size may be bigger than max_req_size.
Take YUYV pixel format as example:
If bInterval = 1, video->interval = 666666, high-speed:
video->reqs_per_frame = 666666 / 1250 = 534
720p: buf->req_payload_size = 1843200 / 534 = 3452
1080p: buf->req_payload_size = 4147200 / 534 = 7766
Based on such req_payload_size, the controller can't run normally.
To fix above issue, assign max_req_size to buf->req_payload_size when
video->reqs_per_frame = 0. And limit buf->req_payload_size to
video->req_size if it's large than video->req_size. Since max_req_size
is used at many place, add it to struct uvc_video and set the value once
endpoint is enabled.
Fixes: 98ad03291560 ("usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-1-62950ef5bcb5@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For full-/high-speed isochronous endpoints, the bInterval value is
used as the exponent for a 2^(bInterval-1) value.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Because the unit of video->interval is 100ns, add a comment info to
make it clear.
Fixes: 48dbe731171e ("usb: gadget: uvc: set req_size and n_requests based on the frame interval") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-2-62950ef5bcb5@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is
running and has a valid transfer ring.
Lianqin reported a crash during suspend/wake-up stress testing, and
found the cause to be dereferencing a non-existing transfer ring
'ep->ring' during xhci_sideband_remove_endpoint().
The endpoint and its ring may be in unknown state if this function
is called after xHCI was reinitialized in resume (lost power), or if
device is being re-enumerated, disconnected or endpoint already dropped.
Fix this by both removing unnecessary ring access, and by checking
ep->ring exists before dereferencing it. Also make sure endpoint is
running before attempting to stop it.
Remove the xhci_initialize_ring_info() call during sideband endpoint
removal as is it only initializes ring structure enqueue, dequeue and
cycle state values to their starting values without changing actual
hardware enqueue, dequeue and cycle state. Leaving them out of sync
is worse than leaving it as it is. The endpoint will get freed in after
this in most usecases.
If the (audio) class driver want's to reuse the endpoint after offload
then it is up to the class driver to ensure endpoint is properly set up.
When some wake IRQs are disabled in the device tree, the corresponding
interrupt entries are removed from DT. In such cases, the driver
currently calls platform_get_irq(), which returns -ENXIO and logs
an error like:
tegra-xusb 3610000.usb: error -ENXIO: IRQ index 2 not found
However, not all wake IRQs are mandatory. The hardware can operate
normally even if some wake sources are not defined in DT. To avoid this
false alarm and allow missing wake IRQs gracefully, use
platform_get_irq_optional() instead of platform_get_irq().
Fixes: 5df186e2ef11 ("usb: xhci: tegra: Support USB wakeup function for Tegra234") Cc: stable <stable@kernel.org> Signed-off-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://patch.msgid.link/20260112145653.95691-1-weichengc@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB2 Bias Pad Control register manages analog parameters for signal
detection. Previously, the HS_DISCON_LEVEL relied on hardware reset
values, which may lead to the detection failure.
Explicitly configure HS_DISCON_LEVEL to 0x7. This ensures the disconnect
threshold is sufficient to guarantee reliable detection.
Currently, the PHY only registers the typec orientation switch when it
is built in. If the typec driver is built as a module, the switch
registration is skipped due to the preprocessor condition, causing
orientation detection to fail.
With commit 45fe729be9a6 ("usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n")
the preprocessor condition is not needed anymore and the orientation
switch is correctly registered for both built-in and module builds.
Fixes: b58f0f86fd61 ("phy: fsl-imx8mq-usb: add tca function driver for imx95") Cc: stable@vger.kernel.org Suggested-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Link: https://patch.msgid.link/20251126140136.1202241-1-fra.schnyder@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the OTG USB port is used to power the SoC, configured as peripheral
and used in gadget mode, there is a disconnection about 6 seconds after the
gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The problem happens because of the PHY driver code flow, summarized as:
* UDC start code (triggered via configfs at any time after boot)
-> phy_init
-> rockchip_usb2phy_init
-> schedule_delayed_work(otg_sm_work [A], 6 sec)
-> phy_power_on
-> rockchip_usb2phy_power_on
-> enable clock
-> rockchip_usb2phy_reset
* Now the gadget interface is up and running.
* 6 seconds later otg_sm_work starts [A]
-> rockchip_usb2phy_otg_sm_work():
if (B_IDLE state && VBUS present && ...):
schedule_delayed_work(&rport->chg_work [B], 0);
* immediately the chg_detect_work starts [B]
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
if (!rport->suspended):
rockchip_usb2phy_power_off() <--- [X]
At [X], the PHY is powered off, causing a disconnection. This quickly
triggers a new connection and following re-enumeration, but any connection
that had been established during the 6 seconds is broken.
The code already checks for !rport->suspended (which, somewhat
counter-intuitively, means the PHY is powered on), so add a guard for VBUS
as well to avoid a disconnection when a cable is connected.
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put().
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 5ab90f40121a ("phy: ti: gmii-sel: Do not use syscon helper to build regmap") Cc: stable@vger.kernel.org # 6.14 Cc: Andrew Davis <afd@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Andrew Davis <afd@ti.com> Link: https://patch.msgid.link/20251127134834.2030-1-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the OTG USB port is used to power to SoC, configured as peripheral and
used in gadget mode, communication stops without notice about 6 seconds
after the gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The related code flow in the PHY driver code can be summarized as:
* the first time chg_detect_work starts (6 seconds after gadget is
configured and enumerated)
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y]
* rockchip_chg_detect_work() changes state and re-triggers itself a few
times until it reaches the DETECTED state:
-> rockchip_chg_detect_work():
if chg_state is DETECTED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z]
At [Y] all existing communications stop. E.g. using a CDC serial gadget,
the /dev/tty* devices are still present on both host and device, but no
data is transferred anymore. The later call with a 'true' argument at [Z]
does not restore it.
Due to the lack of documentation, what chg_det.opmode does exactly is not
clear, however by code inspection it seems reasonable that is disables
something needed to keep the communication working, and testing proves that
disabling these lines lets gadget mode keep working. So prevent changes to
chg_det.opmode when there is a cable connected (VBUS present).
Commit 7ffb791423c7 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
is too narrow. The effect being mitigated in that commit is caused by
ZONE_DEVICE which PCI_P2PDMA has a dependency. ZONE_DEVICE, in general,
lets any physical address be added to the direct-map. I.e. not only ACPI
hotplug ranges, CXL Memory Windows, or EFI Specific Purpose Memory, but
also any PCI MMIO range for the DEVICE_PRIVATE and PCI_P2PDMA cases. Update
the mitigation, limit KASLR entropy, to apply in all ZONE_DEVICE=y cases.
Distro kernels typically have PCI_P2PDMA=y, so the practical exposure of
this problem is limited to the PCI_P2PDMA=n case.
A potential path to recover entropy would be to walk ACPI and determine the
limits for hotplug and PCI MMIO before kernel_randomize_memory(). On
smaller systems that could yield some KASLR address bits. This needs
additional investigation to determine if some limited ACPI table scanning
can happen this early without an open coded solution like
arch/x86/boot/compressed/acpi.c needs to deploy.
Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Fixes: 7ffb791423c7 ("x86/kaslr: Reduce KASLR entropy on most x86 systems") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Balbir Singh <balbirs@nvidia.com> Tested-by: Yasunori Goto <y-goto@fujitsu.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: http://patch.msgid.link/692e08b2516d4_261c1100a3@dwillia2-mobl4.notmuch Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code.
Link: https://lkml.kernel.org/r/20251222205859.3968077-1-shakeel.butt@linux.dev Fixes: ad41251c290d ("lib/buildid: implement sleepable build_id_parse() API") Reported-by: syzbot+09b7d050e4806540153d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=09b7d050e4806540153d Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jinchao Wang <wangjinchao600@gmail.com> Link: https://lkml.kernel.org/r/aUteBPWPYzVWIZFH@ndev Reviewed-by: Christian Brauner <brauner@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkman <daniel@iogearbox.net> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we fail to refill the receive buffers, we schedule a delayed worker
to retry later. However, this worker creates some concurrency issues.
For example, when the worker runs concurrently with virtnet_xdp_set,
both need to temporarily disable queue's NAPI before enabling again.
Without proper synchronization, a deadlock can happen when
napi_disable() is called on an already disabled NAPI. That
napi_disable() call will be stuck and so will the subsequent
napi_enable() call.
To simplify the logic and avoid further problems, we will instead retry
refilling in the next NAPI poll.
Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/526b5396-459d-4d02-8635-a222d07b46d7@redhat.com Cc: stable@vger.kernel.org Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20260106150438.7425-2-minhquangbui99@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xfs_rtcopy_summary() should return the appropriate error code
instead of always returning 0. The caller of this function which is
xfs_growfs_rt_bmblock() is already handling the error.
Fixes: e94b53ff699c ("xfs: cache last bitmap block in realtime allocator") Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v6.7 Signed-off-by: Carlos Maiolino <cem@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse inode cluster allocation sets min/max agbno values to avoid
allocating an inode cluster that might map to an invalid inode
chunk. For example, we can't have an inode record mapped to agbno 0
or that extends past the end of a runt AG of misaligned size.
The initial calculation of max_agbno is unnecessarily conservative,
however. This has triggered a corner case allocation failure where a
small runt AG (i.e. 2063 blocks) is mostly full save for an extent
to the EOFS boundary: [2050,13]. max_agbno is set to 2048 in this
case, which happens to be the offset of the last possible valid
inode chunk in the AG. In practice, we should be able to allocate
the 4-block cluster at agbno 2052 to map to the parent inode record
at agbno 2048, but the max_agbno value precludes it.
Note that this can result in filesystem shutdown via dirty trans
cancel on stable kernels prior to commit 9eb775968b68 ("xfs: walk
all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags") because
the tail AG selection by the allocator sets t_highest_agno on the
transaction. If the inode allocator spins around and finds an inode
chunk with free inodes in an earlier AG, the subsequent dir name
creation path may still fail to allocate due to the AG restriction
and cancel.
To avoid this problem, update the max_agbno calculation to the agbno
prior to the last chunk aligned agbno in the AG. This is not
necessarily the last valid allocation target for a sparse chunk, but
since inode chunks (i.e. records) are chunk aligned and sparse
allocs are cluster sized/aligned, this allows the sb_spino_align
alignment restriction to take over and round down the max effective
agbno to within the last valid inode chunk in the AG.
Note that even though the allocator improvements in the
aforementioned commit seem to avoid this particular dirty trans
cancel situation, the max_agbno logic improvement still applies as
we should be able to allocate from an AG that has been appropriately
selected. The more important target for this patch however are
older/stable kernels prior to this allocator rework/improvement.
Cc: stable@vger.kernel.org # v4.2 Fixes: 56d1115c9bc7 ("xfs: allocate sparse inode chunks on full chunk allocation failure") Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used.
Cc: stable@vger.kernel.org Fixes: 4a3efc6baff93 ("ftrace: Update the mcount_loc check of skipped entries") Link: https://patch.msgid.link/20260113152243.3557219-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 66bce7afbaca ("selftests/mm: fix test result reporting in
gup_longterm") introduced a small bug causing unknown filesystems to
always result in a test failure.
This is because do_test() was updated to use a common reporting path, but
this case appears to have been missed.
This is problematic for e.g. virtme-ng which uses an overlayfs file
system, causing gup_longterm to appear to fail each time due to a test
count mismatch:
Now we correctly handle forked faulted/unfaulted merge on mremap(),
exhaustively assert that we handle this correctly.
Do this in the less duplicative way by adding a new merge_with_fork
fixture and forked/unforked variants, and abstract the forking logic as
necessary to avoid code duplication with this also.
Link: https://lkml.kernel.org/r/1daf76d89fdb9d96f38a6a0152d8f3c2e9e30ac7.1767638272.git.lorenzo.stoakes@oracle.com Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Test that mremap()'ing a VMA into a position such that the target VMA on
merge is unfaulted and the source faulted is correctly performed.
We cover 4 cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
target = prev, expand prev to cover.
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
target = next, expand next to cover.
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover.
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover. Essentially equivalent to 3, but
with additional requirement that next's anon_vma is the same as the
copied VMA's.
Each of these are performed with MREMAP_DONTUNMAP set, which will cause a
KASAN assert for UAF or an assert on zero refcount anon_vma if a bug
exists with correctly propagating anon_vma state in each scenario.
Link: https://lkml.kernel.org/r/f903af2930c7c2c6e0948c886b58d0f42d8e8ba3.1767638272.git.lorenzo.stoakes@oracle.com Fixes: 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Harry Yoo <harry.yoo@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
The related configuration register structure is described
in section 3.1.46 SSP_CFG of the CTU CAN FD
IP CORE Datasheet.
The analysis leading to the proper configuration
is described in section 2.8.3 Secondary sampling point
of the datasheet.
The change has been tested on AMD/Xilinx Zynq
with the next CTU CN FD IP core versions:
- 2.6 aka master in the "integration with Zynq-7000 system" test
6.12.43-rt12+ #1 SMP PREEMPT_RT kernel with CTU CAN FD git
driver (change already included in the driver repo)
- older 2.5 snapshot with mainline kernels with this patch
applied locally in the multiple CAN latency tester nightly runs
6.18.0-rc4-rt3-dut #1 SMP PREEMPT_RT
6.19.0-rc3-dut
The logs, the datasheet and sources are available at
https://canbus.pages.fel.cvut.cz/
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com> Signed-off-by: Pavel Pisa <pisa@fel.cvut.cz> Link: https://patch.msgid.link/20260105111620.16580-1-pisa@fel.cvut.cz Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blk
driver sets up fault injection support by creating the timeout_inject,
requeue_inject, and init_hctx_fault_inject configfs items as children
of the top-level nullbX configfs group.
However, when the nullbX device is removed, the references taken to
these fault-config configfs items are not released. As a result,
kmemleak reports a memory leak, for example:
There is currently an issue with UEFI calibration data parsing for some
TAS devices, like the ASUS ROG Xbox Ally X (RC73XA), that causes audio
quality issues such as gaps in playback. Until the issue is root caused
and fixed, add a quirk to skip using the UEFI calibration data and fall
back to using the calibration data provided by the DSP firmware, which
restores full speaker functionality on affected devices.
Rework the guest=>host syncs in the AMX test to use named actions instead
of arbitrary, incrementing numbers. The "stage" of the test has no real
meaning, what matters is what action the test wants the host to perform.
The incrementing numbers are somewhat helpful for triaging failures, but
fully debugging failures almost always requires a much deeper dive into
the test (and KVM).
Using named actions not only makes it easier to extend the test without
having to shift all sync point numbers, it makes the code easier to read.
[Commit message by Sean Christopherson]
Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com> Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With latest llvm22, I hit the verif_scale_strobemeta selftest failure
below:
$ ./test_progs -n 618
libbpf: prog 'on_event': BPF program load failed: -E2BIG
libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG --
BPF program is too large. Processed 1000001 insn
verification time 7019091 usec
stack depth 488
processed 1000001 insns (limit 1000000) max_states_per_insn 28 total_states 33927 peak_states 12813 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'on_event': failed to load: -E2BIG
libbpf: failed to load object 'strobemeta.bpf.o'
scale_test:FAIL:expect_success unexpected error: -7 (errno 7)
#618 verif_scale_strobemeta:FAIL
But if I increase the verificaiton insn limit from 1M to 10M, the above
test_progs run actually will succeed. The below is the result from veristat:
$ ./veristat strobemeta.bpf.o
Processing 'strobemeta.bpf.o'...
File Program Verdict Duration (us) Insns States Program size Jited size
---------------- -------- ------- ------------- ------- ------ ------------ ----------
strobemeta.bpf.o on_event success 902508939777685 358230 15954 80794
---------------- -------- ------- ------------- ------- ------ ------------ ----------
Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs.
Further debugging shows the llvm commit [1] is responsible for the verificaiton
failure as it tries to convert certain switch statement to if-condition. Such
change may cause different transformation compared to original switch statement.
Note that the above 'switch' statement is added by clang frontend.
Without [1], the switch statement will survive until SelectionDag,
so the switch statement acts like a 'barrier' and prevents some
transformation involved with both 'before' and 'after' the switch statement.
But with [1], the switch statement will be removed during middle end
optimization and later middle end passes (esp. after inlining) have more
freedom to reorder the code.
The static func calc_location() is called inside read_int_var(). The asm code
without [1]:
77: .123....89 (85) call bpf_probe_read_user#112
78: ........89 (79) r1 = *(u64 *)(r10 -368)
79: .1......89 (79) r2 = *(u64 *)(r10 -8)
80: .12.....89 (bf) r3 = r2
81: .123....89 (0f) r3 += r1
82: ..23....89 (07) r2 += 1
83: ..23....89 (79) r4 = *(u64 *)(r10 -464)
84: ..234...89 (a5) if r2 < 0x2 goto pc+13
85: ...34...89 (15) if r3 == 0x0 goto pc+12
86: ...3....89 (bf) r1 = r10
87: .1.3....89 (07) r1 += -400
88: .1.3....89 (b4) w2 = 16
In this case, 'r2 < 0x2' and 'r3 == 0x0' go to null 'locaiton' place,
so the verifier actually prefers to do verification first at 'r1 = r10' etc.
The asm code with [1]:
119: .123....89 (85) call bpf_probe_read_user#112
120: ........89 (79) r1 = *(u64 *)(r10 -368)
121: .1......89 (79) r2 = *(u64 *)(r10 -8)
122: .12.....89 (bf) r3 = r2
123: .123....89 (0f) r3 += r1
124: ..23....89 (07) r2 += -1
125: ..23....89 (a5) if r2 < 0xfffffffe goto pc+6
126: ........89 (05) goto pc+17
...
144: ........89 (b4) w1 = 0
145: .1......89 (6b) *(u16 *)(r8 +80) = r1
In this case, if 'r2 < 0xfffffffe' is true, the control will go to
non-null 'location' branch, so 'goto pc+17' will actually go to
null 'location' branch. This seems causing tremendous amount of
verificaiton state.
To fix the issue, rewrite the following code
return tls_ptr && tls_ptr != (void *)-1
? tls_ptr + tls_index.offset
: NULL;
to if/then statement and hopefully these explicit if/then statements
are sticky during middle-end optimizations.
Test with llvm20 and llvm21 as well and all strobemeta related selftests
are passed.
While FIFO/RR have static priority, DEADLINE is a dynamic priority
scheme. Notably it has static priority -1. Do not assume the priority
doesn't change for deadline tasks just because the static priority
doesn't change.
This ensures DL always sees {DE,EN}QUEUE_MOVE where appropriate.
Fixes: ff77e4685359 ("sched/rt: Fix PI handling vs. sched_setscheduler()") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Juri Lelli <juri.lelli@redhat.com> Link: https://patch.msgid.link/20260114130528.GB831285@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
When setup_new_dl_entity() is called from enqueue_task_dl() ->
enqueue_dl_entity(), the rq-clock should already be updated, and
calling update_rq_clock() again is not right.
Move the update_rq_clock() to the one other caller of
setup_new_dl_entity(): sched_init_dl_server().
Fixes: 9f239df55546 ("sched/deadline: Initialize dl_servers after SMP") Reported-by: Pierre Gondois <pierre.gondois@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Link: https://patch.msgid.link/20260113115622.GA831285@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
EDMA resumes early and suspends late in the system power transition
sequence, while LPI2C enters the NOIRQ stage for both suspend and resume.
This means LPI2C resources become available before EDMA is fully resumed.
Once IRQs are enabled, a slave device may immediately trigger an LPI2C
transfer. If the transfer length meets DMA requirements, the driver will
attempt to use EDMA even though EDMA may still be unavailable.
This timing gap can lead to transfer failures. To prevent this, force
LPI2C to use PIO mode during system-wide suspend and resume transitions.
This reduces dependency on EDMA and avoids using an unready DMA resource.
Fixes: a09c8b3f9047 ("i2c: imx-lpi2c: add eDMA mode support for LPI2C") Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The I2C Hub controller is a simpler GENI I2C variant that doesn't
support DMA at all, add a no_dma flag to make sure it nevers selects
the SE DMA mode with mappable 32bytes long transfers.
Fixes: cacd9643eca7 ("i2c: qcom-geni: add support for I2C Master Hub variant") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ida_alloc_max() interprets its max argument as inclusive.
Using SDW_FW_MAX_DEVICES(16) therefore allows an ID of 16 to be
allocated, but the IRQ domain created for the bus is sized for IDs
0-15. If 16 is returned, irq_create_mapping() fails and the driver
ends up with an invalid IRQ mapping.
Limit the allocation to 0-15 by passing SDW_FW_MAX_DEVICES - 1.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202512240450.hlDH3nCs-lkp@intel.com/ Fixes: aab12022b076 ("soundwire: bus: Add internal slave ID and use for IRQs") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260110201959.2523024-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
"family" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
phy-bcm-ns-usb3.c:206:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit bd6e74a2f0a0 ("phy: broadcom: ns-usb3:
fix Wvoid-pointer-to-enum-cast warning") but then got bad in commit 21bf6fc47a1e ("phy: Use device_get_match_data()").
Note that after various discussions the preferred cast is via "unsigned
long", not "uintptr_t".
Remove bind() call on a client socket that doesn't make sense.
Since strlen(cli_un.sun_path) returns a random value depending on stack
garbage, that many uninitialized bytes are read from the stack as an
unix socket address. This creates random test failures due to the bind
address being invalid or already in use if the same stack value comes up
twice.
The nominal error code for bind(AF_UNSPEC) on an IPv6 socket
is -EAFNOSUPPORT, not -EINVAL. -EINVAL is only returned when
the supplied address struct is too short, which happens to be
the case in current selftests because they treat AF_UNSPEC
like IPv4 sockets do: as an alias for AF_INET (which is a
16-byte struct instead of the 24 bytes required by IPv6
sockets).
Make the union large enough for any address (by adding struct
sockaddr_storage to the union), and make AF_UNSPEC addresses
large enough for any family.
Test for -EAFNOSUPPORT instead, and add a dedicated test case
for truncated inputs with -EINVAL.
current_check_access_socket() treats AF_UNSPEC addresses as
AF_INET ones, and only later adds special case handling to
allow connect(AF_UNSPEC), and on IPv4 sockets
bind(AF_UNSPEC+INADDR_ANY).
This would be fine except AF_UNSPEC addresses can be as
short as a bare AF_UNSPEC sa_family_t field, and nothing
more. The AF_INET code path incorrectly enforces a length of
sizeof(struct sockaddr_in) instead.
Move AF_UNSPEC edge case handling up inside the switch-case,
before the address is (potentially incorrectly) treated as
AF_INET.
Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect") Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Link: https://lore.kernel.org/r/20251027190726.626244-4-matthieu@buffet.re Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value after calling pm_runtime_set_active(),
leaving the device in an inconsistent state if runtime PM initialization
fails.
Check the return value of devm_pm_runtime_enable() and return on
failure. Also move the declaration of 'ret' to the function scope
to support this check.
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=.
Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://patch.msgid.link/aTfHcMJK1wFVnvEe@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup.
Fixes: 891a96f65ac3 ("phy: qcom-qusb2: Add support for runtime PM") Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://patch.msgid.link/20251219085640.114473-1-loic.poulain@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning") Suggested-by: Leonid Segal <leonids@variscite.com> Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com> Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When device tree lacks optional "xlnx,addrwidth" property, the addr_width
variable remained uninitialized with garbage values, causing incorrect
DMA mask configuration and subsequent probe failure. The fix ensures a
fallback to the default 32-bit address width when this property is missing.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Fixes: b72db4005fe4 ("dmaengine: vdma: Add 64 bit addressing support to the driver") Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Folker Schwesinger <dev@folker-schwesinger.de> Link: https://patch.msgid.link/20251021183006.3434495-1-suraj.gupta2@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9d503201ff94000008b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault
The driver's existing logic for setting the DMA mask for "marvell,pdma-1.0"
was flawed. It incorrectly relied on pdev->dev->coherent_dma_mask instead
of declaring the hardware's fixed addressing capability. A cleaner and
more correct approach is to define the mask directly based on the hardware
limitations.
The MMP/PXA PDMA controller is a 32-bit DMA engine. This is supported by
datasheets and various dtsi files for PXA25x, PXA27x, PXA3xx, and MMP2,
all of which are 32-bit systems.
This patch simplifies the driver's logic by replacing the 'u64 dma_mask'
field with a simpler 'u32 dma_width' to store the addressing capability
in bits. The complex if/else block in probe() is then replaced with a
single, clear call to dma_set_mask_and_coherent(). This sets a fixed
32-bit DMA mask for "marvell,pdma-1.0" and a 64-bit mask for
"spacemit,k1-pdma," matching each device's hardware capabilities.
Finally, this change also works around a specific build error encountered
with clang-20 on x86_64 allyesconfig. The shift-count-overflow error is
caused by a known clang compiler issue where the DMA_BIT_MASK(n) macro's
ternary operator is not correctly evaluated in static initializers. By
moving the macro's evaluation into the probe() function, the driver avoids
this compiler bug.
If the pre-operation file size is read before locking the inode and
quiescing O_DIRECT writes, then nfs_truncate_last_folio() might end up
overwriting valid file data.
Commit 6faea3422e3b ("arch, mm: streamline HIGHMEM freeing") overzealously
removed mem_init_free_highmem() function that beside freeing high memory
pages checked for CPU support for high memory as a prerequisite.
Partially restore mem_init_free_highmem() with a new highmem_init() name
and make it discard high memory in case there is no CPU support for it.
Link: https://lkml.kernel.org/r/20251231105701.519711-1-rppt@kernel.org Fixes: 6faea3422e3b ("arch, mm: streamline HIGHMEM freeing") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Jonas Jelonek <jelonek.jonas@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Here are kernel-doc fixes for mm subsystem. I'm also including textsearch
fix since there's currently no maintainer for include/linux/textsearch.h
(get_maintainer.pl only shows LKML).
This patch (of 4):
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/sched/mm.h:332 function parameter 'flags' not described in 'memalloc_flags_save'
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c71 ("drm/amdgpu/userq: move some code around") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8d45caf6a866d4ff842105b577953bb) Signed-off-by: Sasha Levin <sashal@kernel.org>
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e1f ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765 Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b96a6e9da65b94ac3b58ee288239b731) Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The PSR message was moved in commit 4321742c394e ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c394e ("drm/amd/display: Move PSR support message into amdgpu_dm") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229c0766b980ae05affcf9f742d97de6a) Signed-off-by: Sasha Levin <sashal@kernel.org>
The word length is the physical width of the channel slots. So the
hw_params would misconfigure when format width and physical width
doesn't match. Like S24_LE which has data width of 24 bits but physical
width of 32 bits. So if using asymmetric formats you will get a lot of
noise.
Fixes: 689c7655b50c5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-4-8f7ecec525c8@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv".
The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.
When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.
Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.
This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.
Fixes: d74bad3b7452 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic") Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Cole Leavitt <cole@unwrap.rs> Link: https://patch.msgid.link/20260114025518.28519-1-cole@unwrap.rs Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported use-after-free of inet6_ifaddr in
inet6_addr_del(). [0]
The cited commit accidentally moved ipv6_del_addr() for
mngtmpaddr before reading its ifp->flags for temporary
addresses in inet6_addr_del().
Let's move ipv6_del_addr() down to fix the UAF.
[0]:
BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593
syzbot was able to crash the kernel in rt6_uncached_list_flush_dev()
in an interesting way [1]
Crash happens in list_del_init()/INIT_LIST_HEAD() while writing
list->prev, while the prior write on list->next went well.
static inline void INIT_LIST_HEAD(struct list_head *list)
{
WRITE_ONCE(list->next, list); // This went well
WRITE_ONCE(list->prev, list); // Crash, @list has been freed.
}
Issue here is that rt6_uncached_list_del() did not attempt to lock
ul->lock, as list_empty(&rt->dst.rt_uncached) returned
true because the WRITE_ONCE(list->next, list) happened on the other CPU.
We might use list_del_init_careful() and list_empty_careful(),
or make sure rt6_uncached_list_del() always grabs the spinlock
whenever rt->dst.rt_uncached_list has been set.
A similar fix is neeed for IPv4.
[1]
BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline]
BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline]
BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline]
BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020
Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450
The buggy address belongs to the object at ffff8880294cfa00
which belongs to the cache ip6_dst_cache of size 232
The buggy address is located 120 bytes inside of
freed 232-byte region [ffff8880294cfa00, ffff8880294cfae8)
Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Fixes: 78df76a065ae ("ipv4: take rt_uncached_lock only if needed") Reported-by: syzbot+179fc225724092b8b2b2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6964cdf2.050a0220.eaf7.009d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260112103825.3810713-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior.
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e698 ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
projects / thirdparty / kernel / stable.git / log
