Ao Zhong [Mon, 31 Oct 2022 19:37:40 +0000 (20:37 +0100)]
drm/amd/display: add DCN support for ARM64
After moving all FPU code to the DML folder, we can enable DCN support
for the ARM64 platform. Remove the -mgeneral-regs-only CFLAG from the
code in the DML folder that needs to use hardware FPU, and add a control
mechanism for ARM Neon.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Zhao [Wed, 26 Oct 2022 03:48:50 +0000 (11:48 +0800)]
drm/amdgpu: fix for suspend/resume sequence under sriov
- clear kiq ring after suspend/resume under sriov to aviod kiq ring
test failure
- update irq after resume to fix kiq interrput loss
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Jun [Wed, 2 Nov 2022 07:53:26 +0000 (15:53 +0800)]
drm/amdkfd: Fix the warning of array-index-out-of-bounds
For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 25 Oct 2021 09:23:38 +0000 (17:23 +0800)]
drm/amdgpu: switch to select_se_sh wrapper for gfx v9_0
To allow invoking ip specific callbacks
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.odn_edit_dpm_table = smu_od_edit_dpm_table,
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.
Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reported-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix type of second parameter in trans_msg() callback
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drm/amdgpu: Replace one-element array with flexible-array member
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
drm/radeon: Replace one-element array with flexible-array member
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Peng Ju Zhou [Fri, 28 Oct 2022 10:24:45 +0000 (18:24 +0800)]
drm/amdgpu: Remove unnecessary register program in SRIOV
Remove unnecessary register program in SRIOV
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yiqing Yao [Fri, 28 Oct 2022 09:30:17 +0000 (17:30 +0800)]
drm/amdgpu: Disable MCBP from soc21 for SRIOV
[why]
Start from soc21, CP does not support MCBP, so disable it.
[how]
Used amgpu_mcbp flag alone instead of checking if is in SRIOV to
enable/disable MCBP.
Only set flag to enable on asic_type prior to soc21 in SRIOV.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yiqing Yao [Fri, 28 Oct 2022 09:03:17 +0000 (17:03 +0800)]
drm/amdgpu: Clean up soc21 early init for SRIOV
Use virt_init_setting instead of per ip version setting.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Graham Sider [Thu, 29 Sep 2022 15:57:34 +0000 (11:57 -0400)]
drm/amdgpu: extend halt_if_hws_hang to MES
Hang on MES timeout if halt_if_hws_hang is set to 1.
Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Fri, 14 Oct 2022 02:41:13 +0000 (21:41 -0500)]
drm/amdkfd: update GFX11 CWSR trap handler
With corresponding FW change fixes issue where triggering CWSR on a
workgroup with waves in s_barrier wouldn't lead to a back-off and
therefore cause a hang.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rn_vbios_smu_set_dcn_low_power_state() produces a valid warning with
gcc-13:
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:237:6: error: conflicting types for 'rn_vbios_smu_set_dcn_low_power_state' due to enum/integer mismatch; have 'void(struct clk_mgr_internal *, enum dcn_pwr_state)'
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.h:36:6: note: previous declaration of 'rn_vbios_smu_set_dcn_low_power_state' with type 'void(struct clk_mgr_internal *, int)'
I.e. the type of the 2nd parameter of
rn_vbios_smu_set_dcn_low_power_state() in the declaration is int, while
the definition spells enum dcn_pwr_state. Synchronize them to the
latter (and add a forward enum declaration).
Cc: Martin Liska <mliska@suse.cz> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Fri, 21 Oct 2022 19:39:09 +0000 (15:39 -0400)]
drm/amd/display: Fix null pointer issues found in emulation
[why]
fix null point issues found in emulation
Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:46:03 +0000 (17:46 -0400)]
drm/amd/display: Add DSC delay factor workaround
[Why]
Certain 4K high refresh rate modes requiring DSC are exhibiting top
of screen underflow corruption. Increasing the DSC delay by a factor
of 6 percent stops the underflow for most use cases.
[How]
Multiply DSC delay requirement in DML by a factor.
Add debug option to make this DSC delay factor configurable.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:40:08 +0000 (17:40 -0400)]
drm/amd/display: Round up DST_after_scaler to nearest int
[Why]
The DST_after_scaler value that DML spreadsheet outputs is
generally the driver value round up to the nearest int.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:36:32 +0000 (17:36 -0400)]
drm/amd/display: Use forced DSC bpp in DML
[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 7 Oct 2022 16:43:26 +0000 (12:43 -0400)]
drm/amd/display: Fix DCN32 DSC delay calculation
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 23 Oct 2022 02:18:19 +0000 (22:18 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.141.0
- Add flag as a status read back that indicates back to back
flips detected during psr.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Fri, 21 Oct 2022 22:24:02 +0000 (18:24 -0400)]
drm/amd/display: Add a debug option HBR2CP2520 over TPS4
[Why & How] There are cases when we may need to override the hardcoded
TPS4 test pattern. Added parameters and config option to be able to
allow this.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 21 Oct 2022 19:28:52 +0000 (15:28 -0400)]
drm/amd/display: Stop waiting for vblank during pipe programming
[why and how]
This line was originally removed for a compliance issue, but then
reverted as it caused a fringe underflow case.
However, the addition of this line caused a underflow regression
when subVP is on, and it needs to be removed again. We plan to
fix subvp underflow and then re-add in this line. After that,
we will investigate what to do next for the compliance issue.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Modify checks to enable TPS3 pattern when required
[HOW&WHY]
Checking if both DSC and FEC supported from sink and
source before going with TPS3 pattern during link
training.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 21 Oct 2022 14:54:42 +0000 (10:54 -0400)]
drm/amd/display: Remove rate check from pixel rate divider update
[Why]
This check is not needed, and can cause CRC mismatch.
[How]
Remove check and early exit from divider update.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Wed, 19 Oct 2022 22:42:49 +0000 (18:42 -0400)]
drm/amd/display: Check validation passed after applying pipe split changes
[WHY?]
Validation can fail for configurations that were previously supported, by only
changing parameters such as the DET allocations, which is currently unexpected.
[HOW?]
Add a check that validation passes after applying pipe split related changes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 20 Oct 2022 20:07:07 +0000 (16:07 -0400)]
drm/amd/display: Don't enable ODM + MPO
[Description]
Driver doesn't support ODM + MPO
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Tue, 11 Oct 2022 18:28:47 +0000 (14:28 -0400)]
drm/amd/display: Include virtual signal to set k1 and k2 values
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Mon, 17 Oct 2022 22:51:15 +0000 (18:51 -0400)]
drm/amd/display: Reinit DPG when exiting dynamic ODM
[WHY]
DPG must be returned to initialized state when pipe is disabled.
[HOW]
Reinit DPG on unused pipes when exiting dynamic ODM.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Mon, 31 Oct 2022 14:47:36 +0000 (10:47 -0400)]
drm/amd/display: drop vblank_lock from struct amdgpu_display_manager
As of commit 09a5df6c444c ("drm/amd/display: Fix multi-display support
for idle opt workqueue"), vblank_lock is no longer being used. So, don't
init it in amdgpu_dm_init() and remove it from struct
amdgpu_display_manager.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gavin Wan [Wed, 26 Oct 2022 17:45:25 +0000 (13:45 -0400)]
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
The recent change brought a bug on SRIOV envrionment. It caused
unloading amdgpu failed on Guest VM. The reason is that the VF
FLR was requested while unloading amdgpu driver, but the VF FLR
of SRIOV sequence is wrong while removing PCI device.
For SRIOV, the guest driver should not trigger the whole XGMI hive
to do the reset. Host driver control how the device been reset.
Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiapeng Chong [Wed, 26 Oct 2022 07:01:10 +0000 (15:01 +0800)]
drm/amd/display: Modify mismatched function name
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:615: warning: expecting prototype for setup_subvp_dmub_command(). Prototype was for populate_subvp_cmd_pipe_info() instead.
Mukul Joshi [Mon, 9 May 2022 14:44:10 +0000 (10:44 -0400)]
drm/amdkfd: Cleanup kfd_dev struct
Cleanup kfd_dev struct by removing ddev and pdev as both
drm_device and pci_dev can be fetched from amdgpu_device.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Fail the suspend if resources can't be evicted
If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources. Currently the suspend
carries on proceeding to reset the GPU:
At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored. However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.
```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)
To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails. This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.
Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This quirk is now handled in the DRM core, so we can drop all of
the internal code that was added to handle it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Mon, 24 Oct 2022 18:53:24 +0000 (14:53 -0400)]
drm/amd/display: use max_dsc_bpp in amdgpu_dm
Since, the quirk is handled in the DRM core now, we can use that value
instead of the internal value.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Fri, 21 Oct 2022 20:37:34 +0000 (16:37 -0400)]
drm/edid: add a quirk for two LG monitors to get them to work on 10bpc
The LG 27GP950 and LG 27GN950 have visible display corruption when
trying to use 10bpc modes. So, to fix this, cap their maximum DSC
target bitrate to 15bpp.
Suggested-by: Roman Li <roman.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 25 Oct 2022 10:32:15 +0000 (18:32 +0800)]
drm/amdgpu: Optimize TA load/unload/invoke debugfs interfaces
1. Add a function pointer structure ta_funcs to psp context
2. Make the interfaces generic to all TAs
3. Leverage exisitng TA context and remove unused functions
4. Fix return code bugs
v2: Add comments for ta funcs macros and correct typo
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 25 Oct 2022 10:07:44 +0000 (18:07 +0800)]
drm/amdgpu: Optimize RAS TA initialization and TA unload funcs
1. Save TA unload psp response status
2. Add RAS TA loading status check for initializaiton
3. Drop RAS context teardown to allow RAS TA to be reloaded
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Li [Wed, 26 Oct 2022 02:00:54 +0000 (10:00 +0800)]
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ao Zhong [Tue, 25 Oct 2022 21:17:49 +0000 (23:17 +0200)]
drm/amd/display: move remaining FPU code to dml folder
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
these two operations in dcn32/dcn32_resource.c still need to use FPU,
This will cause compilation to fail on ARM64 platforms because
-mgeneral-regs-only is enabled by default to disable the hardware FPU.
Therefore, imitate the dcn31_zero_pipe_dcc_fraction function in
dml/dcn31/dcn31_fpu.c, declare the dcn32_zero_pipe_dcc_fraction function
in dcn32_fpu.c, and move above two operations into this function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ao Zhong [Wed, 26 Oct 2022 11:02:19 +0000 (13:02 +0200)]
drm/amd/display: move remaining FPU code to dml folder
In the process of enabling DCN support for arm64, I found that the
dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still
needs to use FPU. This will cause compilation to fail on ARM64 platforms
because -mgeneral-regs-only is enabled by default to disable the
hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to
dml/dcn10 folder to enable hardware FPU for that function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Graham Sider [Tue, 25 Oct 2022 18:47:05 +0000 (14:47 -0400)]
drm/amdgpu: remove deprecated MES version vars
MES scheduler and kiq versions are stored in mes.sched_version and
mes.kiq_version, respectively, which are read from a register after
their queues are initialized. Remove mes.ucode_fw_version and
mes.data_fw_version which tried to read this versioning info from the
firmware headers (which don't contain this information).
Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alan Liu [Mon, 24 Oct 2022 06:15:30 +0000 (14:15 +0800)]
drm/amdgpu: Move the mutex_lock to protect the return status of securedisplay command buffer
[Why]
Before we call psp_securedisplay_invoke(), we call
psp_prep_securedisplay_cmd_buf() to prepare and initialize the command
buffer.
However, we didn't use the mutex_lock to protect the status of command
buffer. So when multiple threads are using the command buffer, after
thread A return from psp_securedisplay_invoke() and the command buffer
status is set to SUCCESS, another thread B may call
psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE
again, and cause Thread A to get a failure return status.
[How]
Move the mutex_lock out of psp_securedisplay_invoke() to its caller to
cover psp_prep_securedisplay_cmd_buf() and the code checking the return
status of command buffer.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct cdit_header was never used across any of the amd drivers nor
this is exposed to UAPI so it can be removed.
This patch removes struct cdit_header and refactor code accordingly
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_pm4_headers_diq.h header is a leftover from the old H/W debugger
module support added on commit fbeb661bfa895dc ("drm/amdkfd: Add skeleton H/W debugger module support").
That implementation was removed after a while and the last file that
included that header was removed on commit 5bdd3eb253544b1 ("drm/amdkfd: Remove unused old debugger implementation").
This patch removes the unused header file kfd_pm4_headers_diq.h
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Thu, 20 Oct 2022 20:06:26 +0000 (16:06 -0400)]
drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS
[Why]
Invalidate unsupported 420 modes on HDMI TMDS. HDMI TMDS does not
support ODM. Any modes that are horizontally wider than 4096, cannot be
supported via TMDS. So they must be filtered out and should not pass
validation.
[How]
Create fake plane for the new stream, and validate global state by going
through dml validation routine.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 18 Oct 2022 20:27:59 +0000 (16:27 -0400)]
drm/amd/display: Rework comments on dc file
The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Mon, 24 Oct 2022 04:47:47 +0000 (12:47 +0800)]
drm/amdgpu: set fb_modifiers_not_supported in vkms
This patch to fix the gdm3 start failure with virual display:
/usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
/usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC
gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Hanghong [Thu, 20 Oct 2022 15:46:56 +0000 (11:46 -0400)]
drm/amd/display: Wrong colorimetry workaround
[Why]
For FreeSync HDR, native color space flag in AMD VSIF(BT.709) should be
used when intepreting content and color space flag in VSC or AVI
infoFrame should be ignored. However, it turned out some userspace
application still use color flag in VSC or AVI infoFrame which is
incorrect.
[How]
Transfer function is used when building the VSC and AVI infoFrame. Set
colorimetry to BT.709 when all the following match:
1. Pixel format is YCbCr;
2. In FreeSync 2 HDR, color is COLOR_SPACE_2020_YCBCR;
3. Transfer function is TRANSFER_FUNC_GAMMA_22;
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ma Hanghong <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhikzhai [Thu, 20 Oct 2022 15:46:55 +0000 (11:46 -0400)]
drm/amd/display: skip commit minimal transition state
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of minimal
transition too often. Commit state of dc with no check will do pipeline
setup which may re-initialize the component with no need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: zhikzhai <zhikai.zhai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Haiyi Zhou [Thu, 20 Oct 2022 15:46:54 +0000 (11:46 -0400)]
drm/amd/display: wait for vblank during pipe programming
[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.
[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.
Fixes: 5d3e14421410 ("drm/amd/display: do not wait for vblank during pipe programming") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Thu, 20 Oct 2022 15:46:53 +0000 (11:46 -0400)]
drm/amd/display: Fix SDR visual confirm
Apply SDR visual confirm to RGB10 and FP16 formats as well when needed.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Max Tseng [Thu, 20 Oct 2022 15:46:52 +0000 (11:46 -0400)]
drm/amd/display: cursor update command incomplete
Missing send cursor_rect width & Height into DMUB. PSR-SU would use
these information. But missing these assignment in last refactor commit
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 20 Oct 2022 15:46:51 +0000 (11:46 -0400)]
drm/amd/display: Enable timing sync on DCN32
Missed enabling timing sync on DCN32 because DCN32 has a different DML
param.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some linux based OS, the hotplug->HDCP start takes longer than
4seconds (by ~100ms) This is due to the HDCP delay (3 sec) so we only
have 1 second to hotplug->stream enablement, which is not enough for
certain OS configs.
[How]
Change the Delay to 0 seconds. From testing it seems like 0 Seconds can
pass 1.x and 2.x compliances
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 20 Oct 2022 15:46:47 +0000 (11:46 -0400)]
drm/amd/display: Update latencies on DCN321
Update DF related latencies based on new measurements.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Thu, 20 Oct 2022 15:46:44 +0000 (11:46 -0400)]
drm/amd/display: Limit dcn32 to 1950Mhz display clock
[why]
Hardware team recommends we limit dispclock to 1950Mhz for all DCN3.2.x
[how]
Limit to 1950 when initializing clocks.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alan Liu [Thu, 20 Oct 2022 15:46:43 +0000 (11:46 -0400)]
drm/amd/display: Drop struct crc_region and reuse struct rect
[Why]
reuse struct rect rather than adding a new struct.
[How]
- Userspace keeps inputting x_start, y_start, x_end, y_end
- We translate data to x, y, width, height in code flow to store
- translate back to x_start, y_start, x_end, y_end before programming HW
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alan Liu [Thu, 20 Oct 2022 15:46:42 +0000 (11:46 -0400)]
drm/amd/display: Implement secure display on DCN21
[Why]
Porting secure display feature from DCN10 to DCN21. Support single
display for now and will extend to multiple displays.
[How]
- use workqueue to offload works for dmub or dmcu firmware
- after receiving ROI update from userspace, set skip_frame_cnt to 1
- refactor amdgpu_dm_crtc_handle_crc_window_irq()
- disable PSR before activating secure_display on a crtc
- check if secure_display is activated before enabling psr
- only work for single display for now.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Thu, 20 Oct 2022 15:46:41 +0000 (11:46 -0400)]
drm/amd/display: Ignore Cable ID Feature
Ignore cable ID for DP2 receivers that does not support the feature.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Thu, 20 Oct 2022 15:46:40 +0000 (11:46 -0400)]
drm/amd/display: Update DSC capabilitie for DCN314
dcn314 has 4 DSC - conflicted hardware document updated and confirmed.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This file was split in commit 5d945cbcd4b16a29d6470a80dfb19738f9a4319f
("drm/amd/display: Create a file dedicated to planes") and the logic in
dm_plane_format_mod_supported() function got changed by a switch logic.
That change broke drm_plane modifiers setting on series 5000 APUs
(tested on OXP mini AMD 5800U and HP Dev One 5850U PRO)
leading to Gamescope not working as reported on GitHub[1]
To reproduce the issue, enter a TTY and run:
$ gamescope -- vkcube
With said commit applied it will abort. This one restores the old logic,
fixing the issue that affects Gamescope.
Lewis Huang [Thu, 20 Oct 2022 15:46:39 +0000 (11:46 -0400)]
drm/amd/display: refine wake up aux in retrieve link caps
[Why]
Read set_power_state dpcd after HPD cause USB4 CTS 4.2.1.1
[How]
Read LTTPR caps first. If aux channel not ready, wake up aux channel.
If wake up aux channel return pass, retrieve lttpr caps again. If wake
up aux channel return false, register a detection retry timer.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 20 Oct 2022 15:46:38 +0000 (11:46 -0400)]
drm/amd/display: Add events log to trace OPTC lock and unlock
As an attempt to offer more DCN debug tools for cases where the OPTC can
hang, this commit introduces a trace event responsible for showing OPTC
status when it requests lock and unlock.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 20 Oct 2022 15:46:37 +0000 (11:46 -0400)]
drm/amd/display: Convert documentation to a kernel-doc
The dc_dmub_srv file has a lot of documentation associated with SubVP
that could be converted to a kernel-doc. This commit just changes the
comment style to a kernel-doc.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ian Chen [Thu, 20 Oct 2022 15:46:36 +0000 (11:46 -0400)]
drm/amd/display: Refactor eDP PSR codes
We split out PSR config from "global" to "per-panel" config settings.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / kernel / linux.git / log
