In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix three bugs in the rxrpc's sendmsg implementation:
(1) rxrpc_new_client_call() should release the socket lock when returning
an error from rxrpc_get_call_slot().
(2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
held in the event that we're interrupted by a signal whilst waiting
for tx space on the socket or relocking the call mutex afterwards.
Fix this by: (a) moving the unlock/lock of the call mutex up to
rxrpc_send_data() such that the lock is not held around all of
rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
whether we're return with the lock dropped. Note that this means
recvmsg() will not block on this call whilst we're waiting.
(3) After dropping and regaining the call mutex, rxrpc_send_data() needs
to go and recheck the state of the tx_pending buffer and the
tx_total_len check in case we raced with another sendmsg() on the same
call.
Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait
for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.
Without fix (2), something like the following can be induced:
WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
__lock_release kernel/locking/lockdep.c:5306 [inline]
lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
__mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was not possible to create 1-tuple flow director
rule for IPv6 flow type. It was caused by incorrectly
checking for source IP address when validating user provided
destination IP address.
Fix this by changing ip6src to correct ip6dst address
in destination IP address validation for IPv6 flow type.
Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
cyclecounter parameters need to be changed.
Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x
devices"), this function has cleared the SYSTIME registers and reset the
TSAUXC DISABLE_SYSTIME bit.
While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
them during ixgbe_ptp_start_cyclecounter. This function may be called
during both reset and link status change. When link changes, the SYSTIME
counter is still operating normally, but the cyclecounter should be updated
to account for the possibly changed parameters.
Clearing SYSTIME when link changes causes the timecounter to jump because
the cycle counter now reads zero.
Extract the SYSTIME initialization out to a new function and call this
during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
an unnecessary reset of the current time.
This also restores the original SYSTIME clearing that occurred during
ixgbe_ptp_reset before the commit above.
Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading gro_normal_batch, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading sysctl_devconf_inherit_init_net, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading sysctl_fb_tunnels_only_for_init_net, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading netdev_budget_usecs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading netdev_budget, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 51b0bdedb8e7 ("[NET]: Separate two usages of netdev_max_backlog.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading sysctl_tstamp_allow_data, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state). Thus, we
need to add READ_ONCE() to their readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
LRO/GRO_HW should be disabled if there is an attached XDP program.
BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using
BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be
permanently disabled once they are disabled.
Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs
with the number of NQs assigned to the VFs. The IRQs are fixed
on each function and cannot be re-assigned. Only the NQs are being
assigned to the VFs.
2. vf_msix is the total number of NQs to be assigned to the VFs. So
we should decrement vf_msix from hw_resc->max_nqs.
Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not
sufficient when running single buffer XDP programs doing redirect
operations. The stack will complain on missing skb tail room. Fix it
by using PAGE_SIZE when calling xdp_init_buff() for single buffer
programs.
Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli says:
In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
can lead to NULL pointer dereference. [..] Kernel panic:
For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.
t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets. Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.
Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.
This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.
To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.
line 44: ip link add fbond type bond mode 4 miimon 200 \
xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
bond->dev->dev_addr = new_mac
line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 60: ip link set veth1-bond down master fbond
given:
params.ad_actor_system = 0
params.mode = BOND_MODE_8023AD
ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
bond_enslave
-> bond_3ad_initialize(); because first slave
-> if ad.system.sys_mac_addr != bond->dev->dev_addr
return
results:
Nothing is run in bond_3ad_initialize() because dev_addr equals
sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
never initialized anywhere else.
The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.
Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.
1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from check_unmap+0x704/0x980
check_unmap from debug_dma_unmap_page+0x8c/0x9c
debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
moxart_mac_probe from platform_probe+0x48/0x88
platform_probe from really_probe+0xc0/0x2e4
2. After commands:
ip link set dev eth0 down
ip link set dev eth0 up
WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
add_dma_entry from dma_map_page_attrs+0x110/0x328
dma_map_page_attrs from moxart_mac_open+0x134/0x320
moxart_mac_open from __dev_open+0x11c/0x1ec
__dev_open from __dev_change_flags+0x194/0x22c
__dev_change_flags from dev_change_flags+0x14/0x44
dev_change_flags from devinet_ioctl+0x6d4/0x93c
devinet_ioctl from inet_ioctl+0x1ac/0x25c
v1 -> v2:
Extraneous change removed.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed)
and then its virtual address is fetched using qcom_smem_get(). The
physical address associated with that region is also fetched.
The physical address is adjusted so that it is page-aligned, and an
attempt is made to update the size of the region to compensate for
any non-zero adjustment.
But that adjustment isn't done properly. The physical address is
aligned twice, and as a result the size is never actually adjusted.
Fix this by *not* aligning the "addr" local variable, and instead
making the "phys" local variable be the adjusted "addr" value.
Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(which is IMO the recommended approach, as it is the clearest
description)
but it is also possible to leave the specification as just:
port@0 {
reg = <0>;
}
and if the driver implements ds->ops->phy_read and ds->ops->phy_write,
the DSA framework "knows" it should create a ds->slave_mii_bus, and it
should connect to a non-OF-based internal PHY on this MDIO bus, at an
MDIO address equal to the port address.
There is also an intermediary way of describing things:
In case 2, DSA calls phylink_connect_phy() and in case 3, it calls
phylink_of_phy_connect(). In both cases, phylink_create() has been
called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both
cases, PHY_INTERFACE_MODE_NA is translated into phy->interface.
It is important to note that phy_device_create() initializes
dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use
phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we
will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the
PHY.
All this means that in order to maintain compatibility with device tree
blobs where the phy-mode property is missing, we need to allow the
"gmii" phy-mode and treat it as "internal".
This patch assigns the phylink_get_caps in ksz8795 and ksz9477 to
ksz_phylink_get_caps. And update their mac_capabilities in the
respective ksz_dev_ops.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch updates the common port mirror add/del dsa_switch_ops in
ksz_common.c. The individual switches implementation is executed based
on the ksz_dev_ops function pointers.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch moves the vlan dsa_switch_ops such as vlan_add, vlan_del and
vlan_filtering from the individual files ksz8795.c, ksz9477.c to
ksz_common.c file.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
KSZ87xx and KSZ88xx have chip_id representation at reg location 0. And
KSZ9477 compatible switch and LAN937x switch have same chip_id detection
at location 0x01 and 0x02. To have the common switch detect
functionality for ksz switches, ksz_switch_detect function is
introduced.
The ksz9477_switch_detect performs the detecting the chip id from the
location 0x00 and also check gigabit compatibility check & number of
ports based on the register global_options0. To prepare the common ksz
switch detect function, routine other than chip id read is moved to
ksz9477_switch_init.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cited commit reintroduced the ability to set hw-tc-offload
in switchdev mode by reusing NIC mode calls without modifying it
to support both modes, this can cause an illegal memory access
when trying to turn hw-tc-offload off.
Fix this by using the right TC_FLAG when checking if tc rules
are installed while disabling hw-tc-offload.
Driver caches packet merge type in mlx5e_params instance which must be
in perfect sync with the netdev_feature's bit.
Prior to this patch, in certain conditions (*) LRO state was set in
mlx5e_params, while netdev_feature's bit was off. Causing the LRO to
be applied on the RQs (HW level).
(*) This can happen only on profile init (mlx5e_build_nic_params()),
when RQ expect non-linear SKB and PCI is fast enough in comparison to
link width.
Solution: remove setting of packet merge type from
mlx5e_build_nic_params() as netdev features are not updated.
Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a lock_class_key per mlx5 device to avoid a false positive
"possible circular locking dependency" warning by lockdep, on flows
which lock more than one mlx5 device, such as adding SF.
kernel log:
======================================================
WARNING: possible circular locking dependency detected
5.19.0-rc8+ #2 Not tainted
------------------------------------------------------
kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core]
but task is already holding lock: ffff888101aa7898 (&(¬ifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
When the driver unloads, give/reclaim_pages may fail as PF driver in
teardown flow, current code will lead to the following kernel log print
'failed reclaiming pages: err 0'.
Fix it to get same behavior as before the cited commits,
by calling mlx5_cmd_check before handling error state.
mlx5_cmd_check will verify if the returned error is an actual error
needed to be handled by the driver or not and will return an
appropriate value.
Fixes: 8d564292a166 ("net/mlx5: Remove redundant error on reclaim pages") Fixes: 4dac2f10ada0 ("net/mlx5: Remove redundant notify fail on give pages") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The lag_lock is taken from both process and softirq contexts which results
lockdep warning[0] about potential deadlock. However, just disabling
softirqs by using *_bh spinlock API is not enough since it will cause
warning in some contexts where the lock is obtained with hard irqs
disabled. To fix the issue save current irq state, disable them before
obtaining the lock an re-enable irqs from saved state after releasing it.
[0]:
[Sun Aug 7 13:12:29 2022] ================================
[Sun Aug 7 13:12:29 2022] WARNING: inconsistent lock state
[Sun Aug 7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted
[Sun Aug 7 13:12:29 2022] --------------------------------
[Sun Aug 7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[Sun Aug 7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[Sun Aug 7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug 7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at:
[Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550
[Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40
[Sun Aug 7 13:12:29 2022] mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5e_nic_enable+0x114/0x470 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5e_resume+0x105/0x160 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5e_probe+0xac3/0x14f0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] auxiliary_bus_probe+0x9d/0xe0
[Sun Aug 7 13:12:29 2022] really_probe+0x1e0/0xaa0
[Sun Aug 7 13:12:29 2022] __driver_probe_device+0x219/0x480
[Sun Aug 7 13:12:29 2022] driver_probe_device+0x49/0x130
[Sun Aug 7 13:12:29 2022] __driver_attach+0x1e4/0x4d0
[Sun Aug 7 13:12:29 2022] bus_for_each_dev+0x11e/0x1a0
[Sun Aug 7 13:12:29 2022] bus_add_driver+0x3f4/0x5a0
[Sun Aug 7 13:12:29 2022] driver_register+0x20f/0x390
[Sun Aug 7 13:12:29 2022] __auxiliary_driver_register+0x14e/0x260
[Sun Aug 7 13:12:29 2022] mlx5e_init+0x38/0x90 [mlx5_core]
[Sun Aug 7 13:12:29 2022] vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb]
[Sun Aug 7 13:12:29 2022] do_one_initcall+0xc4/0x400
[Sun Aug 7 13:12:29 2022] do_init_module+0x18a/0x620
[Sun Aug 7 13:12:29 2022] load_module+0x563a/0x7040
[Sun Aug 7 13:12:29 2022] __do_sys_finit_module+0x122/0x1d0
[Sun Aug 7 13:12:29 2022] do_syscall_64+0x3d/0x90
[Sun Aug 7 13:12:29 2022] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[Sun Aug 7 13:12:29 2022] irq event stamp: 3596508
[Sun Aug 7 13:12:29 2022] hardirqs last enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100
[Sun Aug 7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100
[Sun Aug 7 13:12:29 2022] softirqs last enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug 7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug 7 13:12:29 2022]
other info that might help us debug this:
[Sun Aug 7 13:12:29 2022] Possible unsafe locking scenario:
[Sun Aug 7 13:12:29 2022] CPU0
[Sun Aug 7 13:12:29 2022] ----
[Sun Aug 7 13:12:29 2022] lock(lag_lock);
[Sun Aug 7 13:12:29 2022] <Interrupt>
[Sun Aug 7 13:12:29 2022] lock(lag_lock);
[Sun Aug 7 13:12:29 2022]
*** DEADLOCK ***
[Sun Aug 7 13:12:29 2022] 4 locks held by swapper/0/0:
[Sun Aug 7 13:12:29 2022] #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60
[Sun Aug 7 13:12:29 2022] #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570
[Sun Aug 7 13:12:29 2022] #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0
[Sun Aug 7 13:12:29 2022]
stack backtrace:
[Sun Aug 7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1
[Sun Aug 7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[Sun Aug 7 13:12:29 2022] Call Trace:
[Sun Aug 7 13:12:29 2022] <IRQ>
[Sun Aug 7 13:12:29 2022] dump_stack_lvl+0x57/0x7d
[Sun Aug 7 13:12:29 2022] mark_lock.part.0.cold+0x5f/0x92
[Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? unwind_next_frame+0x1c4/0x1b50
[Sun Aug 7 13:12:29 2022] ? secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? stack_access_ok+0x1d0/0x1d0
[Sun Aug 7 13:12:29 2022] ? start_kernel+0x3a7/0x3c5
[Sun Aug 7 13:12:29 2022] __lock_acquire+0x1260/0x6720
[Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880
[Sun Aug 7 13:12:29 2022] ? mark_lock.part.0+0xed/0x3060
[Sun Aug 7 13:12:29 2022] ? stack_trace_save+0x91/0xc0
[Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550
[Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x400/0x400
[Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720
[Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40
[Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550
[Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580
[Sun Aug 7 13:12:29 2022] atomic_notifier_call_chain+0xd7/0x1d0
[Sun Aug 7 13:12:29 2022] br_switchdev_fdb_notify+0xea/0x100
[Sun Aug 7 13:12:29 2022] ? br_switchdev_set_port_flag+0x310/0x310
[Sun Aug 7 13:12:29 2022] fdb_notify+0x11b/0x150
[Sun Aug 7 13:12:29 2022] br_fdb_update+0x34c/0x570
[Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? br_fdb_add_local+0x50/0x50
[Sun Aug 7 13:12:29 2022] ? br_allowed_ingress+0x5f/0x1070
[Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580
[Sun Aug 7 13:12:29 2022] br_handle_frame_finish+0x786/0x18e0
[Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580
[Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720
[Sun Aug 7 13:12:29 2022] ? sctp_inet_bind_verify+0x4d/0x190
[Sun Aug 7 13:12:29 2022] ? xlog_unpack_data+0x2e0/0x310
[Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20
[Sun Aug 7 13:12:29 2022] br_nf_hook_thresh+0x227/0x380 [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? setup_pre_routing+0x460/0x460 [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter]
[Sun Aug 7 13:12:29 2022] br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20
[Sun Aug 7 13:12:29 2022] br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter]
[Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter]
[Sun Aug 7 13:12:29 2022] br_handle_frame+0x8a9/0x1270
[Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880
[Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20
[Sun Aug 7 13:12:29 2022] ? bond_handle_frame+0xf9/0xac0 [bonding]
[Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug 7 13:12:29 2022] __netif_receive_skb_core+0x7c0/0x2c70
[Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580
[Sun Aug 7 13:12:29 2022] ? generic_xdp_tx+0x5b0/0x5b0
[Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720
[Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880
[Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580
[Sun Aug 7 13:12:29 2022] __netif_receive_skb_list_core+0x2d7/0x8a0
[Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550
[Sun Aug 7 13:12:29 2022] ? process_backlog+0x960/0x960
[Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x129/0x400
[Sun Aug 7 13:12:29 2022] ? kvm_clock_get_cycles+0x14/0x20
[Sun Aug 7 13:12:29 2022] netif_receive_skb_list_internal+0x5f4/0xd60
[Sun Aug 7 13:12:29 2022] ? do_xdp_generic+0x150/0x150
[Sun Aug 7 13:12:29 2022] ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core]
[Sun Aug 7 13:12:29 2022] napi_complete_done+0x188/0x710
[Sun Aug 7 13:12:29 2022] mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug 7 13:12:29 2022] ? __queue_work+0x53c/0xeb0
[Sun Aug 7 13:12:29 2022] __napi_poll+0x9f/0x540
[Sun Aug 7 13:12:29 2022] net_rx_action+0x420/0xb70
[Sun Aug 7 13:12:29 2022] ? napi_threaded_poll+0x470/0x470
[Sun Aug 7 13:12:29 2022] ? __common_interrupt+0x79/0x1a0
[Sun Aug 7 13:12:29 2022] __do_softirq+0x271/0x92c
[Sun Aug 7 13:12:29 2022] irq_exit_rcu+0x11a/0x170
[Sun Aug 7 13:12:29 2022] common_interrupt+0x7d/0xa0
[Sun Aug 7 13:12:29 2022] </IRQ>
[Sun Aug 7 13:12:29 2022] <TASK>
[Sun Aug 7 13:12:29 2022] asm_common_interrupt+0x22/0x40
[Sun Aug 7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60
[Sun Aug 7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00
[Sun Aug 7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242
[Sun Aug 7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc
[Sun Aug 7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac
[Sun Aug 7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3
[Sun Aug 7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000
[Sun Aug 7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000
[Sun Aug 7 13:12:29 2022] ? default_idle_call+0xcc/0x460
[Sun Aug 7 13:12:29 2022] default_idle_call+0xec/0x460
[Sun Aug 7 13:12:29 2022] do_idle+0x394/0x450
[Sun Aug 7 13:12:29 2022] ? arch_cpu_idle_exit+0x40/0x40
[Sun Aug 7 13:12:29 2022] cpu_startup_entry+0x19/0x20
[Sun Aug 7 13:12:29 2022] rest_init+0x156/0x250
[Sun Aug 7 13:12:29 2022] arch_call_rest_init+0xf/0x15
[Sun Aug 7 13:12:29 2022] start_kernel+0x3a7/0x3c5
[Sun Aug 7 13:12:29 2022] secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug 7 13:12:29 2022] </TASK>
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered.
Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and
ldev->pf[MLX5_LAG_P1].dev have valid pointers when
MLX5_LAG_FLAG_NDEVS_READY is set.
The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and
clearing it. Setting it is done wrongly when both
ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set;
clearing it is done right when either of ldev->pf[i].netdev is cleared.
Consider the following scenario:
1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer
2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and
ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in
MLX5_LAG_FLAG_NDEVS_READY is set.
3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev.
MLX5_LAG_FLAG_NDEVS_READY remains set.
Further execution of mlx5_do_bond() will result in null pointer
dereference when calling mlx5_lag_is_multipath()
This patch fixes the following call trace actually encountered:
When querying mlx5 non-uplink representors capabilities with ethtool
rx-vlan-offload is marked as "off [fixed]". However, it is actually always
enabled because mlx5e_params->vlan_strip_disable is 0 by default when
initializing struct mlx5e_params instance. Fix the issue by explicitly
setting the vlan_strip_disable to 'true' for non-uplink representors.
Ice driver allocates per cpu XDP queues so that redirect path can safely
use smp_processor_id() as an index to the array. At the same time
though, XDP rings are used to pick NAPI context to call napi_schedule()
or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and
num_possible_cpus() of underlying platform is 44, then this means queue
vectors with correlated NAPI contexts will carry several XDP queues.
This in turn can result in a broken behavior where NAPI context of
interest will never be scheduled and AF_XDP socket will not process any
traffic.
To fix this, let us change the way how XDP rings are assigned to Rx
rings and use this information later on when setting
ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated
queue vector and walk through Tx ring's linked list. Once we stumble
upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring.
Previous [0] approach of fixing this issue was for txonly scenario
because of the described grouping of XDP rings across queue vectors. So,
relying on Rx ring meant that NAPI context could be scheduled with a
queue vector without XDP ring with associated XSK pool.
Fix the following scenario:
1. ethtool -L $IFACE rx 8 tx 96
2. xdpsock -q 10 -t -z
Above refers to a case where user would like to attach XSK socket in
txonly mode at a queue id that does not have a corresponding Rx queue.
At this moment ice's XSK logic is tightly bound to act on a "queue pair",
e.g. both Tx and Rx queues at a given queue id are disabled/enabled and
both of them will get XSK pool assigned, which is broken for the presented
queue configuration. This results in the splat included at the bottom,
which is basically an OOB access to Rx ring array.
To fix this, allow using the ids only in scope of "combined" queues
reported by ethtool. However, logic should be rewritten to allow such
configurations later on, which would end up as a complete rewrite of the
control path, so let us go with this temporary fix.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:
This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer.
Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333 Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net> Fixes: cdf0b86b250f ("r8152: fix a WOL issue") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.
Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3b3fd068c56e3fbea30090859216a368398e39bf added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.
It thus prevents *all* rose connect.
The reason is that a special rose_neigh loopback has a NULL device.
/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:
addr callsign dev count use mode restart t0 tf digipeaters
00001 RSLOOP-0 ??? 1 2 DCE yes 0 0
By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.
Verification with rose client application FPAC:
FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port Callsign Callsign AX.25 state ROSE state NetRom status
axudp F6BVP-5 -> F6BVP-9 Connected Connected ---------
Fixes: 3b3fd068c56e ("rose: Fix Null pointer dereference in rose_send_frame()") Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Suggested-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While looking at our current POSIX ACL handling in the context of some
overlayfs work I went through a range of other filesystems checking how they
handle them currently and encountered ntfs3.
The posic_acl_{from,to}_xattr() helpers always need to operate on the
filesystem idmapping. Since ntfs3 can only be mounted in the initial user
namespace the relevant idmapping is init_user_ns.
The posix_acl_{from,to}_xattr() helpers are concerned with translating between
the kernel internal struct posix_acl{_entry} and the uapi struct
posix_acl_xattr_{header,entry} and the kernel internal data structure is cached
filesystem wide.
Additional idmappings such as the caller's idmapping or the mount's idmapping
are handled higher up in the VFS. Individual filesystems usually do not need to
concern themselves with these.
The posix_acl_valid() helper is concerned with checking whether the values in
the kernel internal struct posix_acl can be represented in the filesystem's
idmapping. IOW, if they can be written to disk. So this helper too needs to
take the filesystem's idmapping.
These bits should only be valid when the ptes are present. Introducing
two booleans for it and set it to false when !pte_present() for both pte
and pmd accountings.
The bug is found during code reading and no real world issue reported, but
logically such an error can cause incorrect readings for either smaps or
smaps_rollup output on quite a few fields.
For example, it could cause over-estimate on values like Shared_Dirty,
Private_Dirty, Referenced. Or it could also cause under-estimate on
values like LazyFree, Shared_Clean, Private_Clean.
Link: https://lkml.kernel.org/r/20220805160003.58929-1-peterx@redhat.com Fixes: b1d4d9e0cbd0 ("proc/smaps: carefully handle migration entries") Fixes: c94b6923fa0a ("/proc/PID/smaps: Add PMD migration entry parsing") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
SCI should be updated, because it contains MAC in its first 6
octets.
That's not entirely correct. The SCI can be based on the MAC address,
but doesn't have to be. We can also use any 64-bit number as the
SCI. When the SCI based on the MAC address, it uses a 16-bit "port
number" provided by userspace, which commit 6fc498bc8292 overwrites
with 1.
In addition, changing the SCI after macsec has been setup can just
confuse the receiver. If we configure the RXSC on the peer based on
the original SCI, we should keep the same SCI on TX.
When the macsec device is being managed by a userspace key negotiation
daemon such as wpa_supplicant, commit 6fc498bc8292 would also
overwrite the SCI defined by userspace.
Idmapped mounts should not allow a user to map file ownsership into a
range of ids which is not under the control of that user. However, we
currently don't check whether the mounter is privileged wrt to the
target user namespace.
Currently no FS_USERNS_MOUNT filesystems support idmapped mounts, thus
this is not a problem as only CAP_SYS_ADMIN in init_user_ns is allowed
to set up idmapped mounts. But this could change in the future, so add a
check to refuse to create idmapped mounts when the mounter does not have
CAP_SYS_ADMIN in the target user namespace.
Fixes: bd303368b776 ("fs: support mapped mounts of mapped filesystems") Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220816164752.2595240-1-sforshee@digitalocean.com Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.
With this fix xfrm interface's Tx error counters go up as usual.
CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When namespace support was added to xfrm/afkey, it caused the
previously single-threaded call to xfrm_probe_algs to become
multi-threaded. This is buggy and needs to be fixed with a mutex.
The abvoce commit is a regression according RFC 2367. A better fix would be
use x->lastused. Which will be propsed later.
according to RFC 2367 use_time == sadb_lifetime_usetime.
"sadb_lifetime_usetime
For CURRENT, the time, in seconds, when association
was first used. For HARD and SOFT, the number of
seconds after the first use of the association until
it expires."
The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.
Fix it by decreasing the reference count of `pols[0]` in that path.
Fixes: 134b0fc544ba ("IPsec: propagate security module errors up from flow_cache_lookup") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to AP stop improperly, mt7921 driver would face random command timeout
by chip fw problem. Migrate AP start/stop process to .start_ap/.stop_ap and
congiure BSS network settings in both hooks.
The new flow is shown below.
* AP start
.start_ap()
configure BSS network resource
set BSS to connected state
.bss_info_changed()
enable fw beacon offload
* AP stop
.bss_info_changed()
disable fw beacon offload (skip this command)
.stop_ap()
set BSS to disconnected state (beacon offload disabled automatically)
destroy BSS network resource
Fixes: 116c69603b01 ("mt76: mt7921: Add AP mode support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Above test fails with SIGBUS when there is only a single free hugetlb page.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
Bus error (core dumped)
And worse, with sufficient free hugetlb pages it will map an anonymous page
into a shared mapping, for example, messing up accounting during unmap
and breaking MAP_SHARED semantics:
# echo 2 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
# cat /proc/meminfo | grep HugePages_
HugePages_Total: 2
HugePages_Free: 1
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Reason is that uffd-wp doesn't clear the uffd-wp PTE bit when
unregistering and consequently keeps the PTE writeprotected. Reason for
this is to avoid the additional overhead when unregistering. Note that
this is the case also for !hugetlb and that we will end up with writable
PTEs that still have the uffd-wp PTE bit set once we return from
hugetlb_wp(). I'm not touching the uffd-wp PTE bit for now, because it
seems to be a generic thing -- wp_page_reuse() also doesn't clear it.
VM_MAYSHARE handling in hugetlb_fault() for FAULT_FLAG_WRITE indicates
that MAP_SHARED handling was at least envisioned, but could never have
worked as expected.
While at it, make sure that we never end up in hugetlb_wp() on write
faults without VM_WRITE, because we don't support maybe_mkwrite()
semantics as commonly used in the !hugetlb case -- for example, in
wp_page_reuse().
Note that there is no need to do any kind of reservation in
hugetlb_fault() in this case ... because we already have a hugetlb page
mapped R/O that we will simply map writable and we are not dealing with
COW/unsharing.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> [5.19] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The motivation of this patch comes from a recent report and patchfix from
David Hildenbrand on hugetlb shared handling of wr-protected page [1].
With the reproducer provided in commit message of [1], one can leverage
the uffd-wp lazy-reset of ptes to trigger a hugetlb issue which can affect
not only the attacker process, but also the whole system.
The lazy-reset mechanism of uffd-wp was used to make unregister faster,
meanwhile it has an assumption that any leftover pgtable entries should
only affect the process on its own, so not only the user should be aware
of anything it does, but also it should not affect outside of the process.
But it seems that this is not true, and it can also be utilized to make
some exploit easier.
So far there's no clue showing that the lazy-reset is important to any
userfaultfd users because normally the unregister will only happen once
for a specific range of memory of the lifecycle of the process.
Considering all above, what this patch proposes is to do explicit pte
resets when unregister an uffd region with wr-protect mode enabled.
It should be the same as calling ioctl(UFFDIO_WRITEPROTECT, wp=false)
right before ioctl(UFFDIO_UNREGISTER) for the user. So potentially it'll
make the unregister slower. From that pov it's a very slight abi change,
but hopefully nothing should break with this change either.
Regarding to the change itself - core of uffd write [un]protect operation
is moved into a separate function (uffd_wp_range()) and it is reused in
the unregister code path.
Note that the new function will not check for anything, e.g. ranges or
memory types, because they should have been checked during the previous
UFFDIO_REGISTER or it should have failed already. It also doesn't check
mmap_changing because we're with mmap write lock held anyway.
I added a Fixes upon introducing of uffd-wp shmem+hugetlbfs because that's
the only issue reported so far and that's the commit David's reproducer
will start working (v5.19+). But the whole idea actually applies to not
only file memories but also anonymous. It's just that we don't need to
fix anonymous prior to v5.19- because there's no known way to exploit.
IOW, this patch can also fix the issue reported in [1] as the patch 2 does.
The assumption in __disable_kprobe() is wrong, and it could try to disarm
an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can
easily reproduce this issue.
1. Write 0 to /sys/kernel/debug/kprobes/enabled.
# echo 0 > /sys/kernel/debug/kprobes/enabled
2. Run execsnoop. At this time, one kprobe is disabled.
# /usr/share/bcc/tools/execsnoop &
[1] 2460
PCOMM PID PPID RET ARGS
# cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE]
3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes
kprobes_all_disarmed to false but does not arm the disabled kprobe.
# echo 1 > /sys/kernel/debug/kprobes/enabled
# cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE]
4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the
disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace().
# fg
/usr/share/bcc/tools/execsnoop
^C
Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses
some cleanups and leaves the aggregated kprobe in the hash table. Then,
__unregister_trace_kprobe() initialises tk->rp.kp.list and creates an
infinite loop like this.
When CONFIG_ADVISE_SYSCALLS is not set/enabled and CONFIG_COMPAT is
set/enabled, the riscv compat_syscall_table references
'compat_sys_fadvise64_64', which is not defined:
riscv64-linux-ld: arch/riscv/kernel/compat_syscall_table.o:(.rodata+0x6f8):
undefined reference to `compat_sys_fadvise64_64'
Add 'fadvise64_64' to kernel/sys_ni.c as a conditional COMPAT function so
that when CONFIG_ADVISE_SYSCALLS is not set, there is a fallback function
available.
Link: https://lkml.kernel.org/r/20220807220934.5689-1-rdunlap@infradead.org Fixes: d3ac21cacc24 ("mm: Support compiling out madvise and fadvise") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.
The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.
While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set. But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.
This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.
This patch corrects the bitshift and masking calculation in FR3().
This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).
Root cause:
The rebind_subsystems() is no lock held when move css object from A
list to B list,then let B's head be treated as css node at
list_for_each_entry_rcu().
Solution:
Add grace period before invalidating the removed rstat_css_node.
Audit_alloc_mark() assign pathname to audit_mark->path, on error path
from fsnotify_add_inode_mark(), fsnotify_put_mark will free memory
of audit_mark->path, but the caller of audit_alloc_mark will free
the pathname again, so there will be double free problem.
Fix this by resetting audit_mark->path to NULL pointer on error path
from fsnotify_add_inode_mark().
Cc: stable@vger.kernel.org Fixes: 7b1293234084d ("fsnotify: Add group pointer in fsnotify_init_mark()") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when the writeback code detects a server reboot, it redirties
any pages that were not committed to disk, and it sets the flag
NFS_CONTEXT_RESEND_WRITES in the nfs_open_context of the file descriptor
that dirtied the file. While this allows the file descriptor in question
to redrive its own writes, it violates the fsync() requirement that we
should be synchronising all writes to disk.
While the problem is infrequent, we do see corner cases where an
untimely server reboot causes the fsync() call to abandon its attempt to
sync data to disk and causing data corruption issues due to missed error
conditions or similar.
In order to tighted up the client's ability to deal with this situation
without introducing livelocks, add a counter that records the number of
times pages are redirtied due to a server reboot-like condition, and use
that in fsync() to redrive the sync to disk.
Fixes: 2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know
that FOLL_FORCE can be possibly dangerous, especially if there are races
that can be exploited by user space.
Right now, it would be sufficient to have some code that sets a PTE of a
R/O-mapped shared page dirty, in order for it to erroneously become
writable by FOLL_FORCE. The implications of setting a write-protected PTE
dirty might not be immediately obvious to everyone.
And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set
pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map
a shmem page R/O while marking the pte dirty. This can be used by
unprivileged user space to modify tmpfs/shmem file content even if the
user does not have write permissions to the file, and to bypass memfd
write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590).
To fix such security issues for good, the insight is that we really only
need that fancy retry logic (FOLL_COW) for COW mappings that are not
writable (!VM_WRITE). And in a COW mapping, we really only broke COW if
we have an exclusive anonymous page mapped. If we have something else
mapped, or the mapped anonymous page might be shared (!PageAnonExclusive),
we have to trigger a write fault to break COW. If we don't find an
exclusive anonymous page when we retry, we have to trigger COW breaking
once again because something intervened.
Let's move away from this mandatory-retry + dirty handling and rely on our
PageAnonExclusive() flag for making a similar decision, to use the same
COW logic as in other kernel parts here as well. In case we stumble over
a PTE in a COW mapping that does not map an exclusive anonymous page, COW
was not properly broken and we have to trigger a fake write-fault to break
COW.
Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e
("mm/mprotect: try avoiding write faults for exclusive anonymous pages
when changing protection") and commit 76aefad628aa ("mm/mprotect: fix
soft-dirty check in can_change_pte_writable()"), take care of softdirty
and uffd-wp manually.
For example, a write() via /proc/self/mem to a uffd-wp-protected range has
to fail instead of silently granting write access and bypassing the
userspace fault handler. Note that FOLL_FORCE is not only used for debug
access, but also triggered by applications without debug intentions, for
example, when pinning pages via RDMA.
This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are
affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR.
Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So
let's just get rid of it.
Thanks to Nadav Amit for pointing out that the pte_dirty() check in
FOLL_FORCE code is problematic and might be exploitable.
Note 1: We don't check for the PTE being dirty because it doesn't matter
for making a "was COWed" decision anymore, and whoever modifies the
page has to set the page dirty either way.
Note 2: Kernels before extended uffd-wp support and before
PageAnonExclusive (< 5.19) can simply revert the problematic
commit instead and be safe regarding UFFDIO_CONTINUE. A backport to
v5.19 requires minor adjustments due to lack of
vma_soft_dirty_enabled().
Link: https://lkml.kernel.org/r/20220809205640.70916-1-david@redhat.com Fixes: 9ae0f87d009c ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.16] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When passed -print-file-name=plugin, the dummy gcc script creates a
temporary directory that is never cleaned up. To avoid cluttering
$TMPDIR, instead use a static directory included in the source tree.
Fixes: 76426e238834 ("kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/9996285f-5a50-e56a-eb1c-645598381a20@kernel.org
[ just the plugin-version.h portion as it failed to apply previously - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit didn't consider the fact that ASoC hdac-hda driver
initializes the HD-audio stuff without calling
snd_hda_codec_device_init(). Hence this caused a regression leading
to Oops.
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
~^ ~~~~~~
%lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
ret = ufshcd_system_suspend(dev);
^~~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
return ufshcd_system_resume(dev);
^~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_resume
cc1: some warnings being treated as errors
The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.
Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com Fixes: 3fd23b8dfb54 ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[only take the suspend/resume portion of the commit - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is issue as follows when test f2fs atomic write:
F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock
F2FS-fs (loop0): invalid crc_offset: 0
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix.
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix.
==================================================================
BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0
Read of size 8 at addr 0000000000000028 by task rep/1990
As 3db1de0e582c commit changed atomic write way which new a cow_inode for
atomic write file, and also mark cow_inode as FI_ATOMIC_FILE.
When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode
which is NULL. Then will trigger null-ptr-deref.
To solve above issue, introduce FI_COW_FILE flag for COW inode.
Fiexes: 3db1de0e582c("f2fs: change the current atomic write way") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
F2FS_IOC_ABORT_VOLATILE_WRITE was used to abort a atomic write before.
However it was removed accidentally. So revive it by changing the name,
since volatile write had gone.
arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
2 errors generated.
_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.
According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf
Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug.
If the user provides an improper 'pixclock' value that makes the argumet
of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a
divide-by-zero bug in:
drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().
For example booting with "threadirqs":
static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
...
NIP static_key_enable_cpuslocked+0xfc/0x120
LR static_key_enable_cpuslocked+0xf8/0x120
Call Trace:
static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
static_key_enable+0x30/0x50
setup_forced_irqthreads+0x28/0x40
do_early_param+0xa0/0x108
parse_args+0x290/0x4e0
parse_early_options+0x48/0x5c
parse_early_param+0x58/0x84
early_init_devtree+0xd4/0x518
early_setup+0xb4/0x214
So call jump_label_init() just before parse_early_param() in
early_init_devtree().
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB. Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.
Addresses-Coverity: 1467704 ("Speculative execution data leak") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
