Petr Vaněk [Fri, 2 May 2025 21:50:19 +0000 (23:50 +0200)]
mm: fix folio_pte_batch() on XEN PV
On XEN PV, folio_pte_batch() can incorrectly batch beyond the end of a
folio due to a corner case in pte_advance_pfn(). Specifically, when the
PFN following the folio maps to an invalidated MFN,
expected_pte = pte_advance_pfn(expected_pte, nr);
produces a pte_none(). If the actual next PTE in memory is also
pte_none(), the pte_same() succeeds,
if (!pte_same(pte, expected_pte))
break;
the loop is not broken, and batching continues into unrelated memory.
For example, with a 4-page folio, the PTE layout might look like this:
pte_advance_pfn(PTE[456]) returns a pte_none() due to invalid PFN->MFN
mapping. The next actual PTE (PTE[457]) is also pte_none(), so the loop
continues and includes PTE[457] in the batch, resulting in 5 batched
entries for a 4-page folio. This triggers the following warning:
Original code works as expected everywhere, except on XEN PV, where
pte_advance_pfn() can yield a pte_none() after balloon inflation due to
MFNs invalidation. In XEN, pte_advance_pfn() ends up calling
__pte()->xen_make_pte()->pte_pfn_to_mfn(), which returns pte_none() when
mfn == INVALID_P2M_ENTRY.
The pte_pfn_to_mfn() documents that nastiness:
If there's no mfn for the pfn, then just create an
empty non-present pte. Unfortunately this loses
information about the original pfn, so
pte_mfn_to_pfn is asymmetric.
While such hacks should certainly be removed, we can do better in
folio_pte_batch() and simply check ahead of time how many PTEs we can
possibly batch in our folio.
This way, we can not only fix the issue but cleanup the code: removing the
pte_pfn() check inside the loop body and avoiding end_ptr comparison +
arithmetic.
Link: https://lkml.kernel.org/r/20250502215019.822-2-arkamar@atlas.cz Fixes: f8d937761d65 ("mm/memory: optimize fork() with PTE-mapped THP") Co-developed-by: David Hildenbrand <david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Petr Vaněk <arkamar@atlas.cz> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Sat, 3 May 2025 05:33:14 +0000 (14:33 +0900)]
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
After commit c0e473a0d226 ("block: fix race between set_blocksize and read
paths") was merged, set_blocksize() called by sb_set_blocksize() now locks
the inode of the backing device file. As a result of this change, syzbot
started reporting deadlock warnings due to a circular dependency involving
the semaphore "ns_sem" of the nilfs object, the inode lock of the backing
device file, and the locks that this inode lock is transitively dependent
on.
This is caused by a new lock dependency added by the above change, since
init_nilfs() calls sb_set_blocksize() in the lock section of "ns_sem".
However, these warnings are false positives because init_nilfs() is called
in the early stage of the mount operation and the filesystem has not yet
started.
The reason why "ns_sem" is locked in init_nilfs() was to avoid a race
condition in nilfs_fill_super() caused by sharing a nilfs object among
multiple filesystem instances (super block structures) in the early
implementation. However, nilfs objects and super block structures have
long ago become one-to-one, and there is no longer any need to use the
semaphore there.
So, fix this issue by removing the use of the semaphore "ns_sem" in
init_nilfs().
Since commit d2d786714080 ("mm/hugetlb: enable bootmem allocation from CMA
areas"), a flag is used to mark hugetlb folios as allocated from CMA.
This flag is also used to decide if it should be freed to CMA.
However, the flag isn't copied to the smaller folios when a hugetlb folio
is broken up for demotion, which would cause it to be freed incorrectly.
Fix this by copying the flag to the smaller order hugetlb pages created
from the original one.
Link: https://lkml.kernel.org/r/20250501044325.20365-1-fvdl@google.com Fixes: d2d786714080 ("mm/hugetlb: enable bootmem allocation from CMA areas") Signed-off-by: Frank van der Linden <fvdl@google.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Jane Chu <Jane.Chu@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 29 Apr 2025 09:48:03 +0000 (17:48 +0800)]
mm, swap: fix false warning for large allocation with !THP_SWAP
The !CONFIG_THP_SWAP check existed before just fine because slot cache
would reject high order allocation and let the caller split all folios and
try again.
But slot cache is gone, so large allocation will directly go to the
allocator, and the allocator should just fail silently to inform caller to
do the folio split, this is totally fine and expected.
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com Fixes: 46036188ea1f ("selftests/mm: build with -O2") Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
selftests/mm: fix build break when compiling pkey_util.c
Commit 50910acd6f615 ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com Fixes: 50910acd6f61 ("selftests/mm: use sys_pkey helpers consistently") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: vmalloc: support more granular vrealloc() sizing
Introduce struct vm_struct::requested_size so that the requested
(re)allocation size is retained separately from the allocated area size.
This means that KASAN will correctly poison the correct spans of requested
bytes. This also means we can support growing the usable portion of an
allocation that can already be supported by the existing area's existing
allocation.
Lorenzo Stoakes [Fri, 25 Apr 2025 16:24:36 +0000 (17:24 +0100)]
tools/testing/selftests: fix guard region test tmpfs assumption
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com Fixes: 272f37d3e99a ("tools/selftests: expand all guard region tests to file-backed") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/ Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Kara [Thu, 24 Apr 2025 13:45:13 +0000 (15:45 +0200)]
ocfs2: stop quota recovery before disabling quotas
Currently quota recovery is synchronized with unmount using sb->s_umount
semaphore. That is however prone to deadlocks because
flush_workqueue(osb->ocfs2_wq) called from umount code can wait for quota
recovery to complete while ocfs2_finish_quota_recovery() waits for
sb->s_umount semaphore.
Grabbing of sb->s_umount semaphore in ocfs2_finish_quota_recovery() is
only needed to protect that function from disabling of quotas from
ocfs2_dismount_volume(). Handle this problem by disabling quota recovery
early during unmount in ocfs2_dismount_volume() instead so that we can
drop acquisition of sb->s_umount from ocfs2_finish_quota_recovery().
Link: https://lkml.kernel.org/r/20250424134515.18933-6-jack@suse.cz Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection") Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Shichangkuo <shi.changkuo@h3c.com> Reported-by: Murad Masimov <m.masimov@mt-integration.ru> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Tested-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Kara [Thu, 24 Apr 2025 13:45:12 +0000 (15:45 +0200)]
ocfs2: implement handshaking with ocfs2 recovery thread
We will need ocfs2 recovery thread to acknowledge transitions of
recovery_state when disabling particular types of recovery. This is
similar to what currently happens when disabling recovery completely, just
more general. Implement the handshake and use it for exit from recovery.
Link: https://lkml.kernel.org/r/20250424134515.18933-5-jack@suse.cz Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Tested-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Murad Masimov <m.masimov@mt-integration.ru> Cc: Shichangkuo <shi.changkuo@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Kara [Thu, 24 Apr 2025 13:45:11 +0000 (15:45 +0200)]
ocfs2: switch osb->disable_recovery to enum
Patch series "ocfs2: Fix deadlocks in quota recovery", v3.
This implements another approach to fixing quota recovery deadlocks. We
avoid grabbing sb->s_umount semaphore from ocfs2_finish_quota_recovery()
and instead stop quota recovery early in ocfs2_dismount_volume().
This patch (of 3):
We will need more recovery states than just pure enable / disable to fix
deadlocks with quota recovery. Switch osb->disable_recovery to enum.
Link: https://lkml.kernel.org/r/20250424134301.1392-1-jack@suse.cz Link: https://lkml.kernel.org/r/20250424134515.18933-4-jack@suse.cz Fixes: 5f530de63cfc ("ocfs2: Use s_umount for quota recovery protection") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Tested-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Murad Masimov <m.masimov@mt-integration.ru> Cc: Shichangkuo <shi.changkuo@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mailmap: map Uwe's BayLibre addresses to a single one
When I started working for BayLibre I wasn't aware that the mailserver
rewrote the sender address and so a few commits entered kernel history
with a working but unexpected address. Map the unexpected to the intended
one. This also makes the author of those commits (e.g. 32b4f1a4f07f
("pwm: jz4740: Another few conversions to regmap_{set,clear}_bits()"))
match the address used in the sign-off line.
Lorenzo Stoakes [Thu, 24 Apr 2025 11:16:32 +0000 (12:16 +0100)]
MAINTAINERS: add mm THP section
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for Transparent Huge
Page support and add appropriate maintainers and reviewers.
[lorenzo.stoakes@oracle.com: add Dev Jain as THP reviewer] Link: https://lkml.kernel.org/r/327e6f2f-0f0f-48af-9ca2-3f8cadf0d8bf@lucifer.local Link: https://lkml.kernel.org/r/20250424111632.103637-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Dev Jain <dev.jain@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 24 Apr 2025 21:57:28 +0000 (17:57 -0400)]
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
While discussing some userfaultfd relevant issues recently, Andrea noticed
a potential ABI breakage with -EAGAIN on almost all userfaultfd ioctl()s.
Quote from Andrea, explaining how -EAGAIN was processed, and how this
should fix it (taking example of UFFDIO_COPY ioctl):
The "mmap_changing" and "stale pmd" conditions are already reported as
-EAGAIN written in the copy field, this does not change it. This change
removes the subnormal case that left copy.copy uninitialized and required
apps to explicitly set the copy field to get deterministic
behavior (which is a requirement contrary to the documentation in both
the manpage and source code). In turn there's no alteration to backwards
compatibility as result of this change because userland will find the
copy field consistently set to -EAGAIN, and not anymore sometime -EAGAIN
and sometime uninitialized.
Even then the change only can make a difference to non cooperative users
of userfaultfd, so when UFFD_FEATURE_EVENT_* is enabled, which is not
true for the vast majority of apps using userfaultfd or this unintended
uninitialized field may have been noticed sooner.
Meanwhile, since this bug existed for years, it also almost affects all
ioctl()s that was introduced later. Besides UFFDIO_ZEROPAGE, these also
get affected in the same way:
- UFFDIO_CONTINUE
- UFFDIO_POISON
- UFFDIO_MOVE
This patch should have fixed all of them.
Link: https://lkml.kernel.org/r/20250424215729.194656-2-peterx@redhat.com Fixes: df2cc96e7701 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Fixes: fc71884a5f59 ("mm: userfaultfd: add new UFFDIO_POISON ioctl") Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
selftests/mm: compaction_test: support platform with huge mount of memory
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> Acked-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Wed, 23 Apr 2025 12:30:42 +0000 (13:30 +0100)]
MAINTAINERS: add core mm section
In furtherance of ongoing efforts to ensure people are aware of who
de-facto maintains/has an interest in specific parts of mm, as well trying
to avoid get_maintainers.pl listing only Andrew and the mailing list for
mm files - establish a 'core' memory management section establishing David
as co-maintainer alongside Andrew (thanks David for volunteering!) along
with a number of relevant reviewers.
We try to keep things as fine-grained as possible, so we place only
obviously 'general' mm things here. For files which are specific to a
particular part of mm, we prefer new entries.
Link: https://lkml.kernel.org/r/20250423123042.59082-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Fri, 11 Apr 2025 16:31:24 +0000 (11:31 -0500)]
ocfs2: fix panic in failed foilio allocation
commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of
pages") save -ENOMEM in the folio array upon allocation failure and call
the folio array free code.
The folio array free code expects either valid folio pointers or NULL.
Finding the -ENOMEM will result in a panic. Fix by NULLing the error
folio entry.
Link: https://lkml.kernel.org/r/c879a52b-835c-4fa0-902b-8b2e9196dcbd@oracle.com Fixes: 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") Fixes: 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of pages") Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below. To prevent this invalid access, it is necessary to
check the PMD migration entry and return early. In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio. Since the PMD migration entry is locked, it
cannot be served as the target.
Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."
BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.
Lorenzo Stoakes [Fri, 18 Apr 2025 15:00:52 +0000 (16:00 +0100)]
MAINTAINERS: add reverse mapping section
Separate out the reverse mapping part of memory management and assign
appropriate maintainers and reviewers.
David has long been invovled in work with the reverse mapping and
continues to do so, so is well suited to maintain this area of the kernel.
I have a lot of experience working with the anonymous reverse mapping and
continue to work in this area, and also have good knowledge of the walking
code and code related to VMAs.
This helps people identify who to ask for help, and also additionally makes
life easier in review.
Link: https://lkml.kernel.org/r/20250418150052.299220-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Harry Yoo <harry.yoo@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
x86_64-linux-ld: kernel image bigger than KERNEL_IMAGE_SIZE
Bisect points to commit 6f110a5e4f99 ("Disable SLUB_TINY for build
testing") as the responsible commit. Reverting that patch does indeed fix
the problem. Further analysis shows that disabling SLUB_TINY enables
KASAN, and that KASAN is responsible for the image size increase.
Solve the build problem by disabling the image size check for test
builds.
ocfs2: fix the issue with discontiguous allocation in the global_bitmap
commit 4eb7b93e0310 ("ocfs2: improve write IO performance when
fragmentation is high") introduced another regression.
The following ocfs2-test case can trigger this issue:
> discontig_runner.sh => activate_discontig_bg.sh => resv_unwritten:
> ${RESV_UNWRITTEN_BIN} -f ${WORK_PLACE}/large_testfile -s 0 -l \
> $((${FILE_MAJOR_SIZE_M}*1024*1024))
In my env, test disk size (by "fdisk -l <dev>"):
> 53687091200 bytes, 104857600 sectors.
Error log:
> [*] Reserve 50724M space for a LARGE file, reserve 200M space for future test.
> ioctl error 28: "No space left on device"
> resv allocation failed Unknown error -1
> reserve unwritten region from 0 to 53187969024.
Call flow:
__ocfs2_change_file_space //by ioctl OCFS2_IOC_RESVSP64
ocfs2_allocate_unwritten_extents //start:0 len:53187969024
while()
+ ocfs2_get_clusters //cpos:0, alloc_size:1623168 (cluster number)
+ ocfs2_extend_allocation
+ ocfs2_lock_allocators
| + choose OCFS2_AC_USE_MAIN & ocfs2_cluster_group_search
|
+ ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
__ocfs2_claim_clusters
ocfs2_claim_suballoc_bits
+ During the allocation of the final part of the large file
(after ~47GB), no chain had the required contiguous
bits_wanted. Consequently, the allocation failed.
How to fix:
When OCFS2 is encountering fragmented allocation, the file system should
stop attempting bits_wanted contiguous allocation and instead provide the
largest available contiguous free bits from the cluster groups.
Link: https://lkml.kernel.org/r/20250414060125.19938-2-heming.zhao@suse.com Fixes: 4eb7b93e0310 ("ocfs2: improve write IO performance when fragmentation is high") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 4 May 2025 17:15:42 +0000 (10:15 -0700)]
Merge tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Helge Deller [Sat, 3 May 2025 16:24:01 +0000 (18:24 +0200)]
parisc: Fix double SIGFPE crash
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
Linus Torvalds [Sun, 4 May 2025 15:20:17 +0000 (08:20 -0700)]
Merge tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
Linus Torvalds [Sun, 4 May 2025 15:12:03 +0000 (08:12 -0700)]
Merge tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
Linus Torvalds [Sun, 4 May 2025 15:06:42 +0000 (08:06 -0700)]
Merge tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
Linus Torvalds [Sun, 4 May 2025 14:58:53 +0000 (07:58 -0700)]
Merge tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
Commit:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0") Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Cc: Dionna Amalie Glaze <dionnaglaze@google.com> Cc: Kevin Loughlin <kevinloughlin@google.com> Cc: linux-efi@vger.kernel.org Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Linus Torvalds [Sat, 3 May 2025 23:30:53 +0000 (16:30 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Linus Torvalds [Sat, 3 May 2025 16:30:44 +0000 (09:30 -0700)]
Merge tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
Linus Torvalds [Fri, 2 May 2025 21:41:56 +0000 (14:41 -0700)]
Merge tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three recent regressions, two in cpufreq and one in the
Intel Soundwire driver, and an unchecked MSR access in the
intel_pstate driver:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits
(Rafael Wysocki)
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar)
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki)
- Fix an unchecked MSR aceess in the intel_pstate driver occurring
when CPUID indicates no turbo, but the driver attempts to enable
turbo frequencies due to a misleading value read from an MSR
(Srinivas Pandruvada)"
* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
soundwire: intel_auxdevice: Fix system suspend/resume handling
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
Linus Torvalds [Fri, 2 May 2025 21:37:16 +0000 (14:37 -0700)]
Merge tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix posix mkdir error to ksmbd (also avoids crash in
cifs_destroy_request_bufs)
- two smb1 fixes: fixing querypath info and setpathinfo to old servers
- fix rsize/wsize when not multiple of page size to address DIO
reads/writes
* tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: ensure aligned IO sizes
cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function
cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()
smb: client: fix zero length for mkdir POSIX create context
Linus Torvalds [Fri, 2 May 2025 21:24:21 +0000 (14:24 -0700)]
Merge tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a
bunch of vblank fixes, then a bunch of small fixes across the board.
Seems about the right level for this time in the release cycle.
ttm:
- docs warning fix
kunit
- fix leak in shmem tests
fdinfo:
- driver unbind race fix
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
xe:
- EU stall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
i915:
- Fix build for CONFIG_DRM_I915_PXP=n
nouveau:
- fix race condition in fence handling
ivpu:
- interrupt handling fix
- D0i2 test mode fix
adp:
- vblank fixes
mipi-dbi:
- timing fix"
* tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/gpusvm: set has_dma_mapping inside mapping loop
drm/xe/hwmon: Fix kernel version documentation for temperature
drm/xe/eustall: Do not support EU stall on SRIOV VF
drm/xe/eustall: Resolve a possible circular locking dependency
drm/amdgpu: Add DPG pause for VCN v5.0.1
drm/amdgpu: Fix offset for HDP remap in nbio v7.11
drm/amdgpu: Fail DMABUF map of XGMI-accessible memory
drm/amd/display: Fix slab-use-after-free in hdcp
drm/mipi-dbi: Fix blanking for non-16 bit formats
drm/tests: shmem: Fix memleak
drm/xe/guc: Fix capture of steering registers
drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc()
drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
drm: adp: Remove pointless irq_lock spin lock
drm: adp: Enable vblank interrupts in crtc's .atomic_enable
drm: adp: Handle drm_crtc_vblank_get() errors
drm: adp: Use spin_lock_irqsave for drm device event_lock
drm/fdinfo: Protect against driver unbind
drm/ttm: fix the warning for hit_low and evict_low
accel/ivpu: Fix the D0i2 disable test mode
...
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
Stephan Gerhold [Fri, 2 May 2025 11:22:28 +0000 (13:22 +0200)]
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Linus Torvalds [Fri, 2 May 2025 17:24:37 +0000 (10:24 -0700)]
Merge tag 'block-6.15-20250502' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp (Michael
Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)
- ublk zero copy fix
- ublk selftest fix for UBLK_F_NEED_GET_DATA
* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Linus Torvalds [Fri, 2 May 2025 16:12:29 +0000 (09:12 -0700)]
Merge tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
Linus Torvalds [Fri, 2 May 2025 16:04:25 +0000 (09:04 -0700)]
Merge tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
Linus Torvalds [Fri, 2 May 2025 15:57:00 +0000 (08:57 -0700)]
Merge tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
drm/gpusvm: set has_dma_mapping inside mapping loop
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681af72d3f715c0d0fd72091a54471c1a) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Lucas De Marchi [Mon, 21 Apr 2025 15:15:38 +0000 (08:15 -0700)]
drm/xe/hwmon: Fix kernel version documentation for temperature
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea701 ("drm/xe/hwmon: expose package and vram temperature") Reported-by: Ulisses Furquim <ulisses.furquim@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8500393a8e6c58e5e7c135133ad792fc6fd5b6f4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
spi: tegra114: Don't fail set_cs_timing when delays are zero
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Steven Rostedt [Thu, 1 May 2025 19:19:09 +0000 (15:19 -0400)]
tracing: Fix trace_adjust_address() when there is no modules in scratch area
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Colin Ian King [Tue, 22 Apr 2025 22:13:35 +0000 (23:13 +0100)]
ftrace: Fix NULL memory allocation check
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Jeongjun Park [Tue, 22 Apr 2025 11:30:25 +0000 (20:30 +0900)]
tracing: Fix oob write in trace_seq_to_buffer()
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Will Deacon [Thu, 1 May 2025 10:47:47 +0000 (11:47 +0100)]
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
Cc: Lee Jones <lee@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Lee Jones <lee@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
drm/xe/eustall: Resolve a possible circular locking dependency
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c3440171f2a3e7a68ceb739297726e9)
drm/amdgpu: Fix offset for HDP remap in nbio v7.11
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb) Cc: stable@vger.kernel.org
Felix Kuehling [Thu, 17 Apr 2025 16:02:09 +0000 (12:02 -0400)]
drm/amdgpu: Fail DMABUF map of XGMI-accessible memory
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689bc6b5fd3ab72650ea4b6a667e96a68)
Chris Bainbridge [Thu, 17 Apr 2025 21:50:05 +0000 (16:50 -0500)]
drm/amd/display: Fix slab-use-after-free in hdcp
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:
[ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10
This series is the first part of two series for the Vertexcom driver.
It contains substantial fixes for the RX handling of the Vertexcom MSE102x.
====================
Stefan Wahren [Wed, 30 Apr 2025 13:30:43 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Fix RX error handling
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren [Wed, 30 Apr 2025 13:30:42 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Add range check for CMD_RTS
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren [Wed, 30 Apr 2025 13:30:40 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Lan [Wed, 30 Apr 2025 09:30:51 +0000 (17:30 +0800)]
net: hns3: fixed debugfs tm_qset size
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonglong Liu [Wed, 30 Apr 2025 09:30:50 +0000 (17:30 +0800)]
net: hns3: fix an interrupt residual problem
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 1 May 2025 14:17:15 +0000 (07:17 -0700)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc)
For idpf:
Michal fixes error path handling to remove memory leak.
Larysa prevents reset from being called during shutdown.
For igc:
Jake adjusts locking order to resolve sleeping in atomic context.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix lock order in igc_ptp_reset
idpf: protect shutdown from reset
idpf: fix potential memory leak on kcalloc() failure
====================
octeon_ep: Fix host hang issue during device reboot
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: fec: ERR007885 Workaround for conventional TX
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up") Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
Paulo Alcantara [Wed, 30 Apr 2025 23:15:48 +0000 (20:15 -0300)]
smb: client: ensure aligned IO sizes
Make all IO sizes multiple of PAGE_SIZE, either negotiated by the
server or passed through rsize, wsize and bsize mount options, to
prevent from breaking DIO reads and writes against servers that
enforce alignment as specified in MS-FSA 2.1.5.3 and 2.1.5.4.
Cc: linux-cifs@vger.kernel.org Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Takashi Iwai [Thu, 1 May 2025 08:22:20 +0000 (10:22 +0200)]
Merge tag 'asoc-fix-v6.15-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
Mark Brown [Thu, 1 May 2025 05:43:52 +0000 (14:43 +0900)]
ASoC: intel/sdw_utils: Add volume limits to CS35L56
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
Both CS35L56 and CS42L43 have maximum volumes above 0dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the cases where systems use the soc_sdw_* drivers, audio above the
0dB volume will likely always be distorted, therefore apply a 0dB
limit to those devices.
Stefan Binding (2):
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
Mark Brown [Thu, 1 May 2025 05:43:44 +0000 (14:43 +0900)]
ASoC: stm32: sai: fix kernel rate configuration
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
Dave Airlie [Thu, 1 May 2025 04:29:51 +0000 (14:29 +1000)]
Merge tag 'drm-misc-fixes-2025-04-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A spurious WARN fix for nouveau, an init and interrupt handling fixes
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
kbuild: Properly disable -Wunterminated-string-initialization for clang
Clang and GCC have different behaviors around disabling warnings
included in -Wall and -Wextra and the order in which flags are
specified, which is exposed by clang's new support for
-Wunterminated-string-initialization.
$ clang -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ clang -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ clang -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
Move -Wextra up right below -Wall in Makefile.extrawarn to ensure these
flags are at the beginning of the warning options list. Move the couple
of warning options that have been added to the main Makefile since
commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn") to scripts/Makefile.extrawarn after -Wall /
-Wextra to ensure they get properly disabled for all compilers.
If any Soundwire manager interrupt is reported, and wake interrupt
is not reported, in this scenario irq_flag will be set to zero,
which results in interrupt handler return status as IRQ_NONE.
Add new irq flag 'wake_irq_flag' check for SoundWire wake interrupt
handling to fix incorrect irq handling return status.
Alexander Stein [Tue, 29 Apr 2025 09:49:10 +0000 (11:49 +0200)]
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
Actually check if the passed pointers are valid, before writing to them.
This also fixes a USBAN warning:
UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25
load of value 255 is not a valid value for type '_Bool'
This is because playback_only is uninitialized and is not written to, as
the playback-only property is absent.
Stefan Binding [Wed, 30 Apr 2025 10:31:20 +0000 (11:31 +0100)]
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
The volume control for cs35l56 speakers has a maximum gain of +12 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the case of systems which use the soc_sdw_* driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 400, which is 0 dB maximum volume inside this driver.
The volume limit should be applied to both soundwire and soundwire
bridge configurations.
projects / thirdparty / kernel / linux.git / log
