There's an unexpected interaction between the reset-gpio driver and the
shared GPIO support. The reset-gpio device is an auxiliary device that's
created dynamically and fulfills a similar role to the gpio-shared-proxy
driver but is limited in scope to just supporting the "reset-gpios"
property.
The shared GPIO core code does not take into account that the machine
lookup entry we create when scanning the device-tree must connect the
reset-gpio device - that is the actual consumer of the GPIO and not the
consumer defined on the device tree, which in turn consumes the shared
reset control exposed by the reset-gpio device - to the GPIO controller.
We also must not skip the gpio-shared-proxy driver as it's possible that
a shared GPIO may be used by one consumer as a reset-gpios going through
the reset-gpio device and another that uses GPIOLIB.
We need to make it a special case handled in gpiolib-shared.c. Add a new
function - gpio_shared_dev_is_reset_gpio() - whose role it is to verify
if a non-matching consumer of a shared pin is a reset-gpio device and
make sure it's the right one for this pin. To that end make sure that
its parent is the GPIO controller in question and that the fwnode we
identified as sharing the pin references that controller via the
"reset-gpios" property.
Only include that code if the reset-gpio driver is enabled.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support") Reported-by: Val Packett <val@packett.cool> Closes: https://lore.kernel.org/all/3b5d9df5-934d-4591-8827-6c9573a6f7ba@packett.cool/ Tested-by: Val Packett <val@packett.cool> Tested-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20251125-gpiolib-shared-reset-gpio-fix-v2-1-4eb6fa41f1dd@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Jisheng Zhang [Mon, 24 Nov 2025 00:21:05 +0000 (08:21 +0800)]
gpio: zynq: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:21:04 +0000 (08:21 +0800)]
gpio: xilinx: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:21:03 +0000 (08:21 +0800)]
gpio: xgene: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:21:02 +0000 (08:21 +0800)]
gpio: uniphier: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:21:01 +0000 (08:21 +0800)]
gpio: tqmx86: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:21:00 +0000 (08:21 +0800)]
gpio: pch: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:20:59 +0000 (08:20 +0800)]
gpio: omap: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:20:58 +0000 (08:20 +0800)]
gpio: msc313: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:20:57 +0000 (08:20 +0800)]
gpio: mlxbf2: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:20:56 +0000 (08:20 +0800)]
gpio: ml-ioh: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Jisheng Zhang [Mon, 24 Nov 2025 00:20:55 +0000 (08:20 +0800)]
gpio: pl061: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
The pl061_context_save_regs structure is always embedded into struct
pl061 to simplify code, so this brings a tiny 8 bytes memory overhead
for !CONFIG_PM_SLEEP.
Jisheng Zhang [Mon, 24 Nov 2025 00:20:54 +0000 (08:20 +0800)]
gpio: htc-egpio: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Jisheng Zhang [Mon, 24 Nov 2025 00:20:53 +0000 (08:20 +0800)]
gpio: brcmstb: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Jisheng Zhang [Mon, 24 Nov 2025 00:20:52 +0000 (08:20 +0800)]
gpio: dwapb: Use modern PM macros
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Members of struct software_node_ref_args should not be dereferenced
directly but set using the provided macros. Commit d7cdbbc93c56
("software node: allow referencing firmware nodes") changed the name of
the software node member and caused a build failure. Remove all direct
dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by
waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear
in the system before setting up the reference for the I2C device, while
the actual software node already exists in the intel-xhci-usb-role-switch
module and should be used to set up a static reference. Add a FIXME for
a future improvement.
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes") Fixes: 53c24c2932e5 ("platform/x86: intel_cht_int33fe: use inline reference properties") Cc: stable@vger.kernel.org Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux into gpio/for-next
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
reset: gpio: use software nodes to setup the GPIO lookup
GPIO machine lookup is a nice mechanism for associating GPIOs with
consumers if we don't know what kind of device the GPIO provider is or
when it will become available. However in the case of the reset-gpio, we
are already holding a reference to the device and so can reference its
firmware node. Let's setup a software node that references the relevant
GPIO and attach it to the auxiliary device we're creating.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
reset: gpio: convert the driver to using the auxiliary bus
As the reset-gpio devices are purely virtual and never instantiated from
real firmware nodes, let's convert the driver to using the - more
fitting - auxiliary bus.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
reset: make the provider of reset-gpios the parent of the reset device
Auxiliary devices really do need a parent so ahead of converting the
reset-gpios driver to registering on the auxiliary bus, make the GPIO
device that provides the reset GPIO the parent of the reset-gpio device.
To that end move the lookup of the GPIO device by fwnode to the
beginning of __reset_add_reset_gpio_device() which has the added benefit
of bailing out earlier, before allocating resources for the virtual
device, if the chip is not up yet.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
gpio: swnode: allow referencing GPIO chips by firmware nodes
When doing a software node lookup, we require both the fwnode that
references a GPIO chip as well as the node associated with that chip to
be software nodes. However, we now allow referencing generic firmware
nodes from software nodes in driver core so we should allow the same in
GPIO core. Make the software node name check optional and dependent on
whether the referenced firmware node is a software node. If it's not,
just continue with the lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Charles Keepax [Thu, 20 Nov 2025 13:23:59 +0000 (14:23 +0100)]
spi: cs42l43: Use actual ACPI firmware node for chip selects
On some systems the cs42l43 has amplifiers attached to its SPI
controller that are not properly defined in ACPI. Currently
software nodes are added to support this case, however, the chip
selects for these devices are specified using a hack. A software
node is added with the same name as the pinctrl driver, as the
look up was name based, this allowed the GPIO look up to return
the pinctrl driver even though the swnode was not owned by it.
This was necessary as the swnodes did not support directly
linking to real firmware nodes.
Since commit e5d527be7e69 ("gpio: swnode: don't use the swnode's
name as the key for GPIO lookup") changed the lookup to be
fwnode based this hack will no longer find the pinctrl driver,
resulting in the driver not probing. There is no pinctrl driver
attached to the swnode itself. But other patches did add support
for linking a swnode to a real fwnode node [1]. As such the hack
is no longer needed, so switch over to just passing the real
fwnode for the pinctrl property to avoid any issues.
[Bartosz:
- remove unneeded Fixes: tag,
- use PROPERTY_ENTRY_REF_ARRAY() instead of PROPERTY_ENTRY_REF_ARRAY_LEN()]
Link: https://lore.kernel.org/linux-gpio/20251106-reset-gpios-swnodes-v6-0-69aa852de9e4@linaro.org/ Fixes: 439fbc97502a ("spi: cs42l43: Add bridged cs35l56 amplifiers") Cc: stable+noautosel@kernel.org # Don't backport, previous approach works, fix relies on swnode changes Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
At the moment software nodes can only reference other software nodes.
This is a limitation for devices created, for instance, on the auxiliary
bus with a dynamic software node attached which cannot reference devices
the firmware node of which is "real" (as an OF node or otherwise).
Make it possible for a software node to reference all firmware nodes in
addition to static software nodes. To that end: add a second pointer to
struct software_node_ref_args of type struct fwnode_handle. The core
swnode code will first check the swnode pointer and if it's NULL, it
will assume the fwnode pointer should be set.
Software node graphs remain the same, as in: the remote endpoints still
have to be software nodes.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
software node: increase the reference of the swnode by its fwnode
Once we allow software nodes to reference other kinds of firmware nodes,
the node in args will no longer necessarily be a software node so bump
its reference count using its fwnode interface.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
software node: read the reference args via the fwnode API
Once we allow software nodes to reference all kinds of firmware nodes,
the refnode here will no longer necessarily be a software node so read
its proprties going through its fwnode implementation.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
David Laight [Wed, 19 Nov 2025 22:41:14 +0000 (22:41 +0000)]
gpiolib: acpi: use min() instead of min_t()
min_t(u16, a, b) casts an 'unsigned long' to 'u16'.
Use min(a, b) instead as it promotes the both values to int
and so cannot discard significant bits.
In this case the values should be ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Raag Jadav [Wed, 12 Nov 2025 03:40:11 +0000 (09:10 +0530)]
gpio: elkhartlake: Convert to auxiliary driver
Since PCI device should not be abusing platform device, MFD parent to
platform child path is no longer being pursued for this driver. Convert
it to auxiliary driver, which will be used by EHL PSE auxiliary device.
Raag Jadav [Wed, 12 Nov 2025 03:40:10 +0000 (09:10 +0530)]
platform/x86/intel: Introduce Intel Elkhart Lake PSE I/O
Intel Elkhart Lake Programmable Service Engine (PSE) includes two PCI
devices that expose two different capabilities of GPIO and Timed I/O
as a single PCI function through shared MMIO with below layout.
GPIO: 0x0000 - 0x1000
TIO: 0x1000 - 0x2000
This driver enumerates the PCI parent device and creates auxiliary child
devices for these capabilities. The actual functionalities are provided
by their respective auxiliary drivers.
gpio: shared: extend the ifdef guard to gpio_shared_find_entry()
While this function is supposed to be used by all scanning functions, so
far we only have a single one for OF trees. Once we add support for ACPI
and software nodes, we'll drop the CONFIG_OF guard around this routine
but in order to avoid build warnings, let's extend it to cover it in the
meantime.
The fact that CONFIG_OF is enabled does not mean that the device tree is
populated and that of_root points to a valid device node. Check if it's
NULL before trying to traverse the tree.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/dbe20642-9662-40af-a593-c1263baea73b@sirena.org.uk/ Tested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20251118200459.13969-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kartik Rajput [Thu, 13 Nov 2025 16:31:12 +0000 (22:01 +0530)]
gpio: tegra186: Fix GPIO name collisions for Tegra410
On Tegra410, Compute and System GPIOs have same port names. This
results in the same GPIO names for both Compute and System GPIOs
during initialization in `tegra186_gpio_probe()`, which results in
following warnings:
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.01'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.02'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.01'
...
Add GPIO name prefix in the SoC data and use it to initialize the GPIO
name.
Port names remain unchanged for previous SoCs. On Tegra410, Compute
GPIOs are named COMPUTE-P<PORT>.GPIO, and System GPIOs are named
SYSTEM-P<PORT>.GPIO.
Fixes: 9631a10083d8 ("gpio: tegra186: Add support for Tegra410") Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20251113163112.885900-1-kkartik@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Andy Shevchenko [Wed, 12 Nov 2025 09:32:01 +0000 (10:32 +0100)]
gpiolib: legacy: Make sure we kill gpio_request_one() first
Make sure we kill gpio_request_one() first by converting it to
use legacy APIs that will be alive a bit longer. In particular,
this also shows the code we will use in another function to make
it die independently.
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
gpiolib: support shared GPIOs in core subsystem code
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
gpio: shared-proxy: implement the shared GPIO proxy driver
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Define a new GPIO descriptor flag for marking pins that are shared by
multiple consumer. This flag will be used in several places so we need
to do it in advance and separately from other changes.
Linus Torvalds [Sun, 9 Nov 2025 17:29:44 +0000 (09:29 -0800)]
Merge tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Two reverts merged into one commit to handle a regression caused by a
wrong cleanup because the underlying implications were unclear"
* tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: pca954x: Fix broken reset-gpio usage
Linus Torvalds [Sun, 9 Nov 2025 17:22:08 +0000 (09:22 -0800)]
Merge tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
Jean Delvare [Fri, 7 Nov 2025 18:29:33 +0000 (19:29 +0100)]
kbuild: Let kernel-doc.py use PYTHON3 override
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Nicolas Schier <nsc@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Linus Torvalds [Sat, 8 Nov 2025 23:37:03 +0000 (15:37 -0800)]
Merge tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fix from Dave Airlie:
"Brown paper bag, the dma mask fix which I applied and actually looked
through for bad things, actually broke newer GPUs, there might be some
latent part in the boot path that is assuming 32-bit still, but we
will figure that out elsewhere.
nouveau:
- revert DMA mask change"
* tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau: set DMA mask before creating the flush page"
Linus Torvalds [Sat, 8 Nov 2025 23:34:23 +0000 (15:34 -0800)]
Merge tag 'rtc-6.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"The two reverts are for patches that I shouldn't have applied. The
rx8025 patch fixes an issue present since 2022:
Linus Torvalds [Sat, 8 Nov 2025 17:01:11 +0000 (09:01 -0800)]
Merge tag 'x86-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AMD PCI root device caching regression that triggers
on certain firmware variants
- Fix the zen5_rdseed_microcode[] array to be NULL-terminated
- Add more AMD models to microcode signature checking
* tag 'x86-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add more known models to entry sign checking
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
x86/amd_node: Fix AMD root device caching
Linus Torvalds [Sat, 8 Nov 2025 16:59:05 +0000 (08:59 -0800)]
Merge tag 'sched-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a group-throttling bug in the fair scheduler"
* tag 'sched-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Prevent cfs_rq from being unthrottled with zero runtime_remaining
Linus Torvalds [Sat, 8 Nov 2025 16:43:01 +0000 (08:43 -0800)]
Merge tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This contain fixes for the RT and zoned allocator, and a few fixes for
atomic writes"
* tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: free xfs_busy_extents structure when no RT extents are queued
xfs: fix zone selection in xfs_select_open_zone_mru
xfs: fix a rtgroup leak when xfs_init_zone fails
xfs: fix various problems in xfs_atomic_write_cow_iomap_begin
xfs: fix delalloc write failures in software-provided atomic writes
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Pavel Begunkov [Fri, 7 Nov 2025 18:41:26 +0000 (18:41 +0000)]
io_uring: fix regbuf vector size truncation
There is a report of io_estimate_bvec_size() truncating the calculated
number of segments that leads to corruption issues. Check it doesn't
overflow "int"s used later. Rough but simple, can be improved on top.
Cc: stable@vger.kernel.org Fixes: 9ef4cbbcb4ac3 ("io_uring: add infra for importing vectored reg buffers") Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-458654612@google.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Günther Noack <gnoack@google.com> Tested-by: Günther Noack <gnoack@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 7 Nov 2025 22:51:11 +0000 (14:51 -0800)]
Merge tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
Linus Torvalds [Fri, 7 Nov 2025 21:19:18 +0000 (13:19 -0800)]
Merge tag 'parisc-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
- fix crash triggered by unaligned access in parisc unwinder
* tag 'parisc-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid crash due to unaligned access in unwinder
Linus Torvalds [Fri, 7 Nov 2025 21:13:09 +0000 (13:13 -0800)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
Peter Zijlstra [Thu, 6 Nov 2025 10:50:00 +0000 (11:50 +0100)]
compiler_types: Move unused static inline functions warning to W=2
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build") Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well] Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Linus Torvalds [Fri, 7 Nov 2025 16:10:55 +0000 (08:10 -0800)]
Merge tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
Linus Torvalds [Fri, 7 Nov 2025 16:07:11 +0000 (08:07 -0800)]
Merge tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
Linus Torvalds [Fri, 7 Nov 2025 15:52:45 +0000 (07:52 -0800)]
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
Linus Torvalds [Fri, 7 Nov 2025 15:47:08 +0000 (07:47 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
Linus Torvalds [Fri, 7 Nov 2025 15:39:57 +0000 (07:39 -0800)]
Merge tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
Zhang Chujun [Thu, 6 Nov 2025 03:10:40 +0000 (11:10 +0800)]
tracing/tools: Fix incorrcet short option in usage text for --threads
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Matthew Brost [Fri, 31 Oct 2025 23:40:45 +0000 (16:40 -0700)]
drm/xe: Enforce correct user fence signaling order using
Prevent application hangs caused by out-of-order fence signaling when
user fences are attached. Use drm_syncobj (via dma-fence-chain) to
guarantee that each user fence signals in order, regardless of the
signaling order of the attached fences. Ensure user fence writebacks to
user space occur in the correct sequence.
Jouni Högander [Fri, 31 Oct 2025 12:23:11 +0000 (14:23 +0200)]
drm/xe: Do clean shutdown also when using flr
Currently Xe driver is triggering flr without any clean-up on
shutdown. This is causing random warnings from pending related works as the
underlying hardware is reset in the middle of their execution.
Fix this by performing clean shutdown also when using flr.
Fixes: 501d799a47e2 ("drm/xe: Wire up device shutdown handler") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Maarten Lankhorst <dev@lankhorst.se> Link: https://patch.msgid.link/20251031122312.1836534-1-jouni.hogander@intel.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit a4ff26b7c8ef38e4dd34f77cbcd73576fdde6dd4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tejas Upadhyay [Tue, 7 Oct 2025 10:02:08 +0000 (15:32 +0530)]
drm/xe: Move declarations under conditional branch
The xe_device_shutdown() function was needing a few declarations
that were only required under a specific condition. This change
moves those declarations to be within that conditional branch
to avoid unnecessary declarations.
drm/xe/guc: Synchronize Dead CT worker with unbind
Cancel and wait for any Dead CT worker to complete before continuing
with device unbinding. Else the worker will end up using resources freed
by the undind operation.
Cc: Zhanjun Dong <zhanjun.dong@intel.com> Fixes: d2c5a5a926f4 ("drm/xe/guc: Dead CT helper") Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patch.msgid.link/20251103123144.3231829-6-balasubramani.vivekanandan@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 492671339114e376aaa38626d637a2751cdef263) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Zilin Guan [Thu, 6 Nov 2025 12:01:32 +0000 (12:01 +0000)]
tracing: Fix memory leaks in create_field_var()
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Steven Rostedt [Thu, 16 Oct 2025 17:28:48 +0000 (13:28 -0400)]
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Linus Torvalds [Fri, 7 Nov 2025 00:24:12 +0000 (16:24 -0800)]
Merge tag 'probes-fixes-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- tprobe-events: Fix to register tracepoint correctly
tprobe-events missed to set tracepoint data structure before
registering callback when enabling it. This sets it correctly.
- tprobe-events: Fix to put tracepoint_user when disable the event
tprobe-events missed to unregister tracepoint callback when the event
is disabled. This ensures to unregister it.
* tag 'probes-fixes-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
* tag 'perf-tools-fixes-for-v6.18-1-2025-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbols: Handle '1' symbols in /proc/kallsyms
tools headers asm: Sync fls headers header with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources to handle new exit reasons
tools headers svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
MAINTAINERS: Add James Clark as a perf tools reviewer
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h to pick DRM_IOCTL_GEM_CHANGE_HANDLE
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers x86: Sync table due to introducion of uprobe syscall
tools headers: Sync uapi/linux/fcntl.h with the kernel sources
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers uapi: Update fs.h with the kernel sources
tools arch x86: Sync msr-index.h to pick AMD64_{PERF_CNTR_GLOBAL_STATUS_SET,SAVIC_CONTROL}, IA32_L3_QOS_{ABMC,EXT}_CFG
Linus Torvalds [Thu, 6 Nov 2025 23:44:18 +0000 (15:44 -0800)]
Merge tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible to
assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
* tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
cpuidle: riscv-sbi: Replace deprecated strcpy in sbi_cpuidle_init_cpu
riscv: KGDB: Replace deprecated strcpy in kgdb_arch_handle_qxfer_pkt
riscv: asm: use .insn for making custom instructions
riscv: tests: Make RISCV_KPROBES_KUNIT tristate
riscv: tests: Rename kprobes_test_riscv to kprobes_riscv
riscv: Fix memory leak in module_frob_arch_sections()
riscv: ptdump: use seq_puts() in pt_dump_seq_puts() macro
riscv: stacktrace: Disable KASAN checks for non-current tasks
Linus Torvalds [Thu, 6 Nov 2025 23:40:14 +0000 (15:40 -0800)]
Merge tag 'acpi-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI Smart Battery Subsystem (SBS)
driver and two documentation issues:
- Fix computation of the battery->present value in acpi_battery_read()
to work when battery->id is not zero (Dan Carpenter)
- Fix comment typo in the ACPI CPPC library (Chu Guangqing)
- Fix I2C device references in two ASL examples in the firmware guide
that were broken by a previous update (Jonas Gorski)"
* tag 'acpi-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SBS: Fix present test in acpi_battery_read()
ACPI: CPPC: Fix typo in a comment
Documentation: ACPI: i2c-muxes: fix I2C device references
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
__unregister_trace_fprobe() checks tf->tuser to put it when removing
tprobe. However, disable_trace_fprobe() does not use it and only calls
unregister_fprobe(). Thus it forgets to disable tracepoint_user.
If the trace_fprobe has tuser, put it for unregistering the tracepoint
callbacks when disabling tprobe correctly.
tracing: tprobe-events: Fix to register tracepoint correctly
Since __tracepoint_user_init() calls tracepoint_user_register() without
initializing tuser->tpoint with given tracpoint, it does not register
tracepoint stub function as callback correctly, and tprobe does not work.
Initializing tuser->tpoint correctly before tracepoint_user_register()
so that it sets up tracepoint callback.
Merge two documentation fixes for 6.18-rc5, a commet typo fix in the
ACPI CPPC library (Chu Guangqing) and fixes for two ASL examples in the
firmware guide (Jonas Gorski).
Linus Torvalds [Thu, 6 Nov 2025 20:48:18 +0000 (12:48 -0800)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Two Curve25519 related fixes:
- Re-enable KASAN support on curve25519-hacl64.c with gcc.
- Disable the arm optimized Curve25519 code on CPU_BIG_ENDIAN
kernels. It has always been broken in that configuration"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: arm/curve25519: Disable on CPU_BIG_ENDIAN
lib/crypto: curve25519-hacl64: Fix older clang KASAN workaround for GCC
Linus Torvalds [Thu, 6 Nov 2025 20:45:15 +0000 (12:45 -0800)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fix from Eric Biggers:
"Fix an UBSAN warning that started occurring when the block layer
started supporting logical_block_size > PAGE_SIZE"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
projects / thirdparty / kernel / linux.git / log
