Scott Rifenbark [Thu, 27 Sep 2012 18:12:15 +0000 (12:12 -0600)]
documentation: adt-manual, yocto-project-qs - Added tarball installer info
Turns out the .sh file that installs the tarball comes down without
executable permissions. I added a sentence in each manual instructing
the user to set the permissions to the script before attempting to
run it.
Scott Rifenbark [Wed, 26 Sep 2012 20:58:31 +0000 (13:58 -0700)]
documentation: adt-manual - updates to adt_installer location choice
Fixes [YOCTO_#2930]
You can now select the install location directory instead of
automatically going to /opt/poky. Some small edits to the
section that describes what happens when you fire off the
adt_installer script.
Scott Rifenbark [Wed, 26 Sep 2012 17:28:15 +0000 (10:28 -0700)]
documentation: adt-manual - Added dev package information
Added a new paragraph to the section that talks about getting
images to state that if the user is not using or building a
core-image-*-dev type image and they want to develop against
their image, they need to be sure to include the development
packages in their image recipe.
Scott Rifenbark [Wed, 26 Sep 2012 16:51:02 +0000 (09:51 -0700)]
documentation: dev-manual - changed to directory for BSP example.
Section A.5.2.3 "Changing recipes-kernel" indicated that the user
needed to look in poky/meta-yocto/recipes-kernel/linux to find
the linux-yocto_3.2.bbappend file to locate correct SRCREV
values. With 3.1, the team split out kernel and BSP stuff
even further by creating a poky/meta-yocto-bsp directory.
The example needs to reference that directory instead.
When a build fails, there should not be a back button on the screen.
All available actions are provided within the failure notification,
so no back button is needed.
Tom Zanussi [Thu, 27 Sep 2012 22:12:42 +0000 (17:12 -0500)]
yocto-bsp: fix dmaengine feature inclusion
The cfg/dmaengine/dmaengine feature changed location to cfg/dmaengine
in the 3.4 yocto kernel's meta branch. Add template code to include
the appropriate version.
Tom Zanussi [Thu, 27 Sep 2012 22:12:41 +0000 (17:12 -0500)]
yocto-bsp: make vfat feature inclusion conditional on kernel version
The linux-yocto-3.2 cfg/vfat feature changed location to cfg/fs/vfat
in the 3.4 yocto kernel's meta branch. Add template code to include
the appropriate version depending on kernel version.
Otavio Salvador [Fri, 28 Sep 2012 13:31:21 +0000 (10:31 -0300)]
xserver-xorg: Remove RCONFLICTS against xserver-xorg
When merging the xserver-xorg fix the to use RDEPENDS in
xserver-xorg-module-exa the RCONFLICTS has not been removed by
mistake. This drops the RCONFLICTS to properly fix it.
Richard Purdie [Fri, 28 Sep 2012 13:15:30 +0000 (14:15 +0100)]
perl: Fix substitution madness
We're going around in circles trying to fix the sed expressions and making one case
work and others not work. This patch fixes the base configuration file so we have
non-overlapping substitutions. I've tried to significantly clean up various problems
that were occurring once and for all.
This will hopefully resolve all the issues people have been seeing with incorrect perl
paths.
Kang Kai [Fri, 28 Sep 2012 06:59:29 +0000 (14:59 +0800)]
ltp: add dependency libcap
Similar to libaio, libcap is another dependency of ltp.
If libcap has been done populate_sysroot but rpm/ipk package is not
created, ltp will be compiled with libcap. So when install ltp to a
image, it complains that package libcap is not found.
Richard Purdie [Thu, 27 Sep 2012 22:07:28 +0000 (23:07 +0100)]
bitbake: parse/ConfHandler: Add negative lookahead to spot some quoting problems
Syntax like:
FOO = "bar" # eek"
would result in FOO taking the value 'bar" #eek' which is clearly
not the intention. Whilst our metadata is riddled with mixtures of even
quotes like:
FOO = "d.getVar("X")"
odd numbers of quotes seem rare. This patch adds detection of one odd
quote which we don't have any of in OE-Core so it seems a valid sanity
improvement.
Ross Burton [Thu, 27 Sep 2012 15:46:09 +0000 (16:46 +0100)]
bitbake: hob: set modal flag on progress dialog
The entire interface isn't usable whilst the progress dialog is up so we might
as well set the modal flag so that some WMs (such as GNOME 3) can do nice things
with the dialog (such as pin it to the titlebar).
bitbake: hob/settings: implement a new tab in settings dialog to show SSTATE_MIRRORS
Add a new tab to show correctly SSTATE_MIRRORS variable. Now you can add new
mirrors or delete mirror. "info" image was also changed( it is smaller, so it
can be next to labels).
>From "Build environment" tab, SSTATE_DIR and SSTATE_MIRRORS vars were removed.
Richard Purdie [Thu, 27 Sep 2012 22:06:06 +0000 (23:06 +0100)]
sstate: Relax the duplicate file whitelist for now
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
sanity: Added explicit network error status in SanityCheckFailed event
If we fail a network test, a special flag is set in the SanityChekFailed
event. This helps Hob identify the network error properly and display
a special message to the user.
initrd: Spawn an emergency shell when something goes wrong
set -e allows to exit if a command fails. We install a trap and execute
emergency_shell() when either the init script exits or when ctrl-c is
typed (say if we are stuck somewhere and we want to debug it).
Constantin Musca [Thu, 27 Sep 2012 12:39:55 +0000 (15:39 +0300)]
sanity.bbclass: bblayers.conf should be updated automatically
- add check_bblayers_conf bitbake function which does the bblayers.conf
v4 -> v5 update if necessary (every layer should make its specific
bblayers.conf upgrades appending to the check_bblayers_conf function)
- we ask the user to re-run bitbake because we can't trigger reparsing
without being invasive
Richard Purdie [Thu, 27 Sep 2012 16:56:56 +0000 (17:56 +0100)]
Revert "autotools.bbclass: using relative paths for acpaths"
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
Paul Eggleton [Tue, 25 Sep 2012 14:17:17 +0000 (15:17 +0100)]
bitbake: lib/bb/data.py: improve output for expansion errors
Instead of logging the function/variable separately as a NOTE when
failing to expand, re-raise ExpansionError with more contextual
information. This means that the full details are reported in Hob as
well as actually reporting the original error message in any UI where
we previously did not. For example, we used to get this with tab/space
indentation issues in a python function:
NOTE: Error expanding variable populate_packages
ERROR: Unable to parse /path/to/recipename.bb
Now, we will get this:
ERROR: ExpansionError during parsing /path/to/recipename.bb: Failure
expanding variable populate_packages: IndentationError: unindent does
not match any outer indentation level (<string>, line 4)
bitbake: Multiple user interface fixes in settings
1. Move the "Others" tab from advanced settings to simple settings
2. Organize content of tabs into headings
3. Match various labels in the settings with the design
4. Clean up config_md5 in both simple and advanced settings
This patch implements a part of the changes requested by Belen in the settings dialogs.
The second version of the patch addresses all the UI changes requested by Belen (more
details are in the bug description): alphabetical ordering of the image types and
warnings if no image type is selected.
This patch adds a sanity check progress screen to hob. The screen
is displayed when Hob executes the sanity check procedure. The screen
is displayed for at least 5 seconds. If a network error is detected,
a special dialog is displayed which lets the user open the proxy
configuration page directly.
Note that currently bitbake triggers the network tests only when
the value of its TMPDIR variable changes, which happens fairly rare
on my system. This is the subject of another bug (#3026).
Version 2 of the patch splits the changes in two parts (sanity.bbclass
belongs to oe-core).
bitbake: hob: Buttons width and height are taken for host
- removed all set_size_request calls for buttons in order to:
- force autosizing of buttons with regard to the text length
- use host theme default height for buttons
- modified buttons on image details page to have the same height (default host one) and the width of the button with the largest text
- modified Stop button on build details page to have the default height by directly attaching it to the containing table instead of hbox
bitbake: hob/settings: implement a new tab in settings dialog to show SSTATE_MIRRORS
Add a new tab to show correctly SSTATE_MIRRORS variable. Now you can add new
mirrors or delete mirror. "info" image was also changed( it is smaller, so it
can be next to labels).
>From "Build environment" tab, SSTATE_DIR and SSTATE_MIRRORS vars were removed.
Commit 38234f2e276356b1d77a87ceabc486107e336d19 tried to fix the sed
expressions by anchoring the left side of the search regexp to prevent
$prefix$prefix type expression in the perl config. For nativesdk this is
not enough. Adding anchors on both side fixes this.
Phil Blundell [Thu, 27 Sep 2012 11:44:31 +0000 (12:44 +0100)]
eglibc: Remove bogus PACKAGES_DYNAMIC setting
It transpires that eglibc has been setting PACKAGES_DYNAMIC = "libc6*" for
some time. However, this is bogus for at least two reasons:
1. Bitbake interprets PACKAGES_DYNAMIC as a regex, not a glob, so this will
match against any package whose name starts "libc" plus zero or more sixes.
This is particularly toxic because the nativesdk variant picks up the same
value and will, consequently, start trying to build itself at the slightest
excuse.
2. eglibc doesn't actually build any packages named "libc6<anything>", other
than the ones that are named in PACKAGES anyway, so the dynamic provider
declaration is in any case useless.
Simply deleting the line is not sufficient since then we get the default
value from bitbake.conf which causes eglibc.bb to fight with eglibc-locale.bb.
So instead we must set it to the empty string for good results.
Martin Jansa [Sat, 22 Sep 2012 17:13:14 +0000 (19:13 +0200)]
xserver-xorg: use EXTENDPKGV instead of PV in RCONFLICTS_${PN}-module-exa
* it doesn't make much sense with PV, because xserver-xorg-module-exa
was introduced in
http://git.openembedded.org/openembedded-core/commit/meta/recipes-graphics/xorg-xserver?id=1a666ee1cda3c0b74daba5881fc5f62e13deec66
so our xserver-xorg-module-exa RCONFLICTS with xserver-xorg (<= 1.11.2-r4)
and (< 1.11.2) is not good enough
* because we don't know how many PRINC are in BSP/DISTRO layers,
then it's safer to RCONFLICTS with every older version then current
EXTENDPKGV
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
--
* I haven't really tested this with IPK, since it was changed from
RREPLACES to RCONFLICTS (because of RPM) and all my installed devices
are already upgraded Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Thu, 27 Sep 2012 13:52:46 +0000 (08:52 -0500)]
cml1.bbclass: Convert tab indentation in python functions into four-space
Based on the previous commit 604d46c686d06d62d5a07b9c7f4fa170f99307d8
(Convert tab indentation in python functions into four-space), the
cml.bbclass was not converted, and in order to properly extend it
with external bbappend's it needs to be converted.
Phil Blundell [Tue, 25 Sep 2012 13:04:02 +0000 (14:04 +0100)]
util-linux: Don't package chkdupexe
The chkdupexe utility is fairly worthless and drags perl in as a build dependency
of the whole util-linux recipe. If anybody actually wants to use this script
then we should package it separately, but for the time being let's just delete it.
Robert Yang [Tue, 25 Sep 2012 13:38:36 +0000 (21:38 +0800)]
package_rpm.bbclass: change the arch's "-" to "_" for platform
The platform and platform_extra will be written to /etc/rpm/platform,
the rpm's arch has changed the "-" to "_", so the value in platform
should also be updated.
Robert Yang [Tue, 25 Sep 2012 13:38:37 +0000 (21:38 +0800)]
package_rpm.bbclass: no initial_solution in the second build
There is no initial_solution.manifest in the second build when
incremental rpm image generation, since the initial solution has been
skipped. So we should check it before cat it.
Paul Eggleton [Tue, 25 Sep 2012 14:58:32 +0000 (15:58 +0100)]
layer.conf: allow other layers to depend on this version
Set LAYERVERSION and rename the collection to "core". Given changes such
as the tabs to spaces cleanup for python functions in the current
version, this allows other layers to depend on this version of OE-Core
specifically should they choose to do so, by specifying the following
in their own layer.conf:
LAYERDEPENDS_layername = "core:1"
Where layername is whatever value is being added to BBFILE_COLLECTIONS.
(This change does nothing unless a layer has LAYERDEPENDS set.)
Phil Blundell [Tue, 25 Sep 2012 16:38:06 +0000 (17:38 +0100)]
iproute2: Use configured values for ${base_sbindir} and ${libdir}
These were previously being hard-coded to "/sbin" and "/usr/lib" respectively,
resulting in unpackaged files if the configured values were something else.
If the files being relocated are already used by other processes the
relocate script will fail with a traceback. This patch will trap any IO
errors when opening such a file and gracefully report them to the user.
Also change the exit code from 1 to -1 for a better adt-installer user
experience (like pointing the user to the adt_installer.log).
For start-stop-daemon, --make-pidfile is used when starting a
program that does not create its own pid file.
atd would create its own /var/run/atd.pid, so remove this option.
Zhenhua Luo [Wed, 26 Sep 2012 07:18:37 +0000 (15:18 +0800)]
sysvinit-inittab: fix hang issue of series consoles check
The kernel boot process hangs when /proc/consoles doesn't exists, therefore
check the existence of /proc/consoles before executing pkg_postinst script.
Following is the log when /proc/consoles doesn't exist:
Running postinst /etc/rpm-postinsts/102...
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
done.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
INIT: no more processes left in this runlevel
Phil Blundell [Wed, 26 Sep 2012 11:55:19 +0000 (12:55 +0100)]
package_ipk: Remove spurious '-i' in grep command for log_check
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Phil Blundell [Wed, 26 Sep 2012 09:45:18 +0000 (10:45 +0100)]
gcc-configure-cross: factor out --enable-threads argument into ${GCCTHREADS}
This allows BSPs for architectures with no thread support to set (for
example) "GCCTHREADS=no" without having to override all the other configure
parameters.
Richard Purdie [Wed, 26 Sep 2012 13:32:13 +0000 (14:32 +0100)]
sstate: Remove master manifest usage
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
Richard Purdie [Wed, 26 Sep 2012 11:56:58 +0000 (12:56 +0100)]
packagedata/multilib: Fix search patch for multilib builds
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
Richard Purdie [Wed, 26 Sep 2012 11:45:17 +0000 (12:45 +0100)]
sstate: Fix SSTATE_DUPWHITELIST variable usage
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
Richard Purdie [Wed, 26 Sep 2012 11:11:00 +0000 (12:11 +0100)]
poky.conf: We need to clear WARN_QA to avoid the unsafe-references
The intention of the previous patch was to disable these warnings but by
commenting out the line, it caused a fallback to the defaults which enable
it. This really disables the warnings.
bitbake: hob/builddetailspage: change tooltips and remove a dialog from "Build stopped" message
When you stop a build, a "Build stopped" message appears. I have changed 2 tooltips and
also eliminate the alert that comes up when you click 'Edit packages'.
Bruce Ashfield [Mon, 24 Sep 2012 20:31:06 +0000 (16:31 -0400)]
beagleboard: update to 3.4
Updating the default preference of the beagleboard to the 3.4
kernel.
build, boot and testing has been done on the beagleboard (revC) and
beagleboard XM. Existing functionality has been confirmed using
core-image-sato, and in particular mouse, keyboard and graphics have
been re-validated.
Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
gcc-common.inc: Consider multilib when renaming libgcc for debian'ness
When doing multilib builds rpm does not find libgcc1 for lib32
multilib because its not honoring the debian renaming scheme for
libgcc-multilib. Lets add MLPREFIX to fix it.
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
Updated the section "Using an External SCM." This section was
written so that PN was refering to a package instead of correctly
refering to the recipe.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
