xHC hosts from several vendors have the same issue where endpoints start
so slowly that a later queued 'Stop Endpoint' command may complete before
endpoint is up and running.
The 'Stop Endpoint' command fails with context state error as the endpoint
still appears as stopped.
See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for
details
-------------------------------
| If Number | Function |
-------------------------------
| 2 | USB AP Log Port |
-------------------------------
| 3 | USB AP GNSS Port|
-------------------------------
| 4 | USB AP META Port|
-------------------------------
| 5 | ADB port |
-------------------------------
| 6 | USB MD AT Port |
------------------------------
| 7 | USB MD META Port|
-------------------------------
| 8 | USB NTZ Port |
-------------------------------
| 9 | USB Debug port |
-------------------------------
Signed-off-by: Jack Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested successfully connecting to the Internet via rndis interface after
dialing via AT commands on If#=3 or If#=4.
Not sure of the purpose of the other serial interfaces.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Hexagon-specific constant extender optimization in LLVM may crash on
Linux kernel code [1], such as fs/bcache/btree_io.c after
commit 32ed4a620c54 ("bcachefs: Btree path tracepoints") in 6.12:
clang: llvm/lib/Target/Hexagon/HexagonConstExtenders.cpp:745: bool (anonymous namespace)::HexagonConstExtenders::ExtRoot::operator<(const HCE::ExtRoot &) const: Assertion `ThisB->getParent() == OtherB->getParent()' failed.
Stack dump:
0. Program arguments: clang --target=hexagon-linux-musl ... fs/bcachefs/btree_io.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module 'fs/bcachefs/btree_io.c'.
4. Running pass 'Hexagon constant-extender optimization' on function '@__btree_node_lock_nopath'
Without assertions enabled, there is just a hang during compilation.
This has been resolved in LLVM main (20.0.0) [2] and backported to LLVM
19.1.0 but the kernel supports LLVM 13.0.1 and newer, so disable the
constant expander optimization using the '-mllvm' option when using a
toolchain that is not fixed.
When looking up a non-existent file, efivarfs returns -EINVAL if the
file does not conform to the NAME-GUID format and -ENOENT if it does.
This is caused by efivars_d_hash() returning -EINVAL if the name is not
formatted correctly. This error is returned before simple_lookup()
returns a negative dentry, and is the error value that the user sees.
Fix by removing this check. If the file does not exist, simple_lookup()
will return a negative dentry leading to -ENOENT and efivarfs_create()
already has a validity check before it creates an entry (and will
correctly return -EINVAL)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org>
[ardb: make efivarfs_valid_name() static] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the RIIC driver may run the I2C bus faster than requested,
which may cause subtle failures. E.g. Biju reported a measured bus
speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L.
The initial calculation of the bus period uses DIV_ROUND_UP(), to make
sure the actual bus speed never becomes faster than the requested bus
speed. However, the subsequent division-by-two steps do not use
round-up, which may lead to a too-small period, hence a too-fast and
possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed
of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806
resp. 403226 Hz instead of 97656 resp. 390625 Hz.
Fix this by using DIV_ROUND_UP() in the subsequent divisions, too.
Commit be26ba96421a ("block: Fix potential deadlock while freezing queue and
acquiring sysfs_loc") actually reverts commit 22465bbac53c ("blk-mq: move cpuhp
callback registering out of q->sysfs_lock"), and causes the original resctrl
lockdep warning.
So revert it and we need to fix the issue in another way.
Cc: Nilay Shroff <nilay@linux.ibm.com> Fixes: be26ba96421a ("block: Fix potential deadlock while freezing queue and acquiring sysfs_loc") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241218101617.3275704-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Snapshot the output of CPUID.0xD.[1..n] during kvm.ko initiliaization to
avoid the overead of CPUID during runtime. The offset, size, and metadata
for CPUID.0xD.[1..n] sub-leaves does not depend on XCR0 or XSS values, i.e.
is constant for a given CPU, and thus can be cached during module load.
On Intel's Emerald Rapids, CPUID is *wildly* expensive, to the point where
recomputing XSAVE offsets and sizes results in a 4x increase in latency of
nested VM-Enter and VM-Exit (nested transitions can trigger
xstate_required_size() multiple times per transition), relative to using
cached values. The issue is easily visible by running `perf top` while
triggering nested transitions: kvm_update_cpuid_runtime() shows up at a
whopping 50%.
As measured via RDTSC from L2 (using KVM-Unit-Test's CPUID VM-Exit test
and a slightly modified L1 KVM to handle CPUID in the fastpath), a nested
roundtrip to emulate CPUID on Skylake (SKX), Icelake (ICX), and Emerald
Rapids (EMR) takes:
SKX 11650
ICX 22350
EMR 28850
Using cached values, the latency drops to:
SKX 6850
ICX 9000
EMR 7900
The underlying issue is that CPUID itself is slow on ICX, and comically
slow on EMR. The problem is exacerbated on CPUs which support XSAVES
and/or XSAVEC, as KVM invokes xstate_required_size() twice on each
runtime CPUID update, and because there are more supported XSAVE features
(CPUID for supported XSAVE feature sub-leafs is significantly slower).
Note, updating runtime CPUID information multiple times per nested
transition is itself a flaw, especially since CPUID is a mandotory
intercept on both Intel and AMD. E.g. KVM doesn't need to ensure emulated
CPUID state is up-to-date while running L2. That flaw will be fixed in a
future patch, as deferring runtime CPUID updates is more subtle than it
appears at first glance, the benefits aren't super critical to have once
the XSAVE issue is resolved, and caching CPUID output is desirable even if
KVM's updates are deferred.
Cc: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241211013302.1347853-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin reports that a hypervisor lying to a guest about the size
of the ASID field may result in unexpected issues:
- if the underlying HW does only supports 8 bit ASIDs, the ASID
field in a TLBI VAE1* operation is only 8 bits, and the HW will
ignore the other 8 bits
- if on the contrary the HW is 16 bit capable, the ASID field
in the same TLBI operation is always 16 bits, irrespective of
the value of TCR_ELx.AS.
This could lead to missed invalidations if the guest was lead to
assume that the HW had 8 bit ASIDs while they really are 16 bit wide.
In order to avoid any potential disaster that would be hard to debug,
prenent the migration between a host with 8 bit ASIDs to one with
wider ASIDs (the converse was obviously always forbidden). This is
also consistent with what we already do for VMIDs.
If it becomes absolutely mandatory to support such a migration path
in the future, we will have to trap and emulate all TLBIs, something
that nobody should look forward to.
Fixes: d5a32b60dc18 ("KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1") Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Oliver Upton <oliver.upton@linux.dev> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20241203190236.505759-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The intent of the check is to see whether at least one UMC has ECC
enabled. So do that instead of tracking which ones are enabled in masks
which are too small in size anyway and lead to not loading the driver on
Zen4 machines with UMCs enabled over UMC8.
Fixes: e2be5955a886 ("EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh") Reported-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Avadhut Naik <avadhut.naik@amd.com> Reviewed-by: Avadhut Naik <avadhut.naik@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20241210212054.3895697-1-avadhut.naik@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that the relatively popular RK3399 SoC has been put together
using a large amount of illicit substances, as experiments reveal that its
integration of GIC500 exposes the *secure* programming interface to
non-secure.
This has some pretty bad effects on the way priorities are handled, and
results in a dead machine if booting with pseudo-NMI enabled
(irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64:
irqchip/gic-v3: Select priorities at boot time"), which relies on the
priorities being programmed using the NS view.
Let's restore some sanity by going one step further and disable security
altogether in this case. This is not any worse, and puts us in a mode where
priorities actually make some sense.
Huge thanks to Mark Kettenis who initially identified this issue on
OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux.
Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chen-Yu Tsai <wens@csie.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current implementation leaves pdev->dev as a wakeup source. Add a
device_init_wakeup(&pdev->dev, false) call in the .remove() function and
in the error path of the .probe() function.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Fixes: 527f36f5efa4 ("mmc: mediatek: add support for SDIO eint wakup IRQ") Cc: stable@vger.kernel.org
Message-ID: <20241203023442.2434018-1-joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Value 0 in ADMA length descriptor is interpreted as 65536 on new Tegra
chips, remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk to make sure max
ADMA2 length is 65536.
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue") Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Reported-by: Robert Hodaszi <robert.hodaszi@digi.com> Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
The interrupt line of PCI devices is interpreted as edge-triggered,
however the interrupt signal of the m_can controller integrated in Intel
Elkhart Lake CPUs appears to be generated level-triggered.
Consider the following sequence of events:
- IR register is read, interrupt X is set
- A new interrupt Y is triggered in the m_can controller
- IR register is written to acknowledge interrupt X. Y remains set in IR
As at no point in this sequence no interrupt flag is set in IR, the
m_can interrupt line will never become deasserted, and no edge will ever
be observed to trigger another run of the ISR. This was observed to
result in the TX queue of the EHL m_can to get stuck under high load,
because frames were queued to the hardware in m_can_start_xmit(), but
m_can_finish_tx() was never run to account for their successful
transmission.
On an Elkhart Lake based board with the two CAN interfaces connected to
each other, the following script can reproduce the issue:
ip link set can0 up type can bitrate 1000000
ip link set can1 up type can bitrate 1000000
To fix the issue, repeatedly read and acknowledge interrupts at the
start of the ISR until no interrupt flags are set, so the next incoming
interrupt will also result in an edge on the interrupt line.
While we have received a report that even with this patch, the TX queue
can become stuck under certain (currently unknown) circumstances on the
Elkhart Lake, this patch completely fixes the issue with the above
reproducer, and it is unclear whether the remaining issue has a similar
cause at all.
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab21e ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames") Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab21e ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b03 ("net-next/hinic: Add logical Txq and Rxq") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62c3 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62c3, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387cb9 ("netdev: add per-queue statistics") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 43fb7bce8866 ("ksmbd: fix broken transfers when exceeding max simultaneous operations") Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccafe8 ("net/smc: determine accepted ISM devices") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a290 ("net/smc: smc_poll improvements") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cxl_port_setup_targets() algorithm fails to identify valid target list
ordering in the presence of 4-way and above switches resulting in
'cxl create-region' failures of the form:
$ cxl create-region -d decoder0.0 -g 1024 -s 2G -t ram -w 8 -m mem4 mem1 mem6 mem3 mem2 mem5 mem7 mem0
cxl region: create_region: region0: failed to set target7 to mem0
cxl region: cmd_create_region: created 0 regions
Fix the method to calculate @distance by iterativeley multiplying the
number of targets per switch port. This also follows the algorithm
recommended here [1].
Align permissions of the resulting .nmconnection file, instead of
the input file from hv_kvp_daemon. To avoid the tiny time frame
where the output file is world-readable, use umask instead of chmod.
Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile") Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Link: https://lore.kernel.org/r/20241016143521.3735-1-olaf@aepfle.de Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241016143521.3735-1-olaf@aepfle.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The logic to check that the region past the end of the superblock is all
zeroes is wrong -- we don't want to check only the bytes past the end of
the maximally sized ondisk superblock structure as currently defined in
xfs_format.h; we want to check the bytes beyond the end of the ondisk as
defined by the feature bits.
Port the superblock size logic from xfs_repair and then put it to use in
xfs_scrub.
Cc: <stable@vger.kernel.org> # v4.15 Fixes: 21fb4cb1981ef7 ("xfs: scrub the secondary superblocks") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
On a V5 filesystem with 64k fsblocks and 512 byte inodes, this results
in cluster_size = 8192 * (512 / 256) = 16384. As a result,
sb_spino_align and sb_inoalignmt are both set to zero. Unfortunately,
this trips the new sb_spino_align check that was just added to
xfs_validate_sb_common, and the mkfs fails:
Prior to commit 59e43f5479cce1 this all worked fine, even if "sparse"
inodes are somewhat meaningless when everything fits in a single
fsblock. Adjust the checks to handle existing filesystems.
Cc: <stable@vger.kernel.org> # v6.13-rc1 Fixes: 59e43f5479cce1 ("xfs: sb_spino_align is not verified") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit ca6448aed4f10a, we created an "end_daddr" variable to fix
fsmap reporting when the end of the range requested falls in the middle
of an unknown (aka free on the rmapbt) region. Unfortunately, I didn't
notice that the the code sets end_daddr to the last sector of the device
but then uses that quantity to compute the length of the synthesized
mapping.
Zizhi Wo later observed that when end_daddr isn't set, we still don't
report the last fsblock on a device because in that case (aka when
info->last is true), the info->high mapping that we pass to
xfs_getfsmap_group_helper has a startblock that points to the last
fsblock. This is also wrong because the code uses startblock to
compute the length of the synthesized mapping.
Fix the second problem by setting end_daddr unconditionally, and fix the
first problem by setting start_daddr to one past the end of the range to
query.
Cc: <stable@vger.kernel.org> # v6.11 Fixes: ca6448aed4f10a ("xfs: Fix missing interval for missing_owner in xfs fsmap") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reported-by: Zizhi Wo <wozizhi@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The runt AG at the end of a filesystem is almost always smaller than
the mp->m_sb.sb_agblocks. Unfortunately, when setting the max_agbno
limit for the inode chunk allocation, we do not take this into
account. This means we can allocate a sparse inode chunk that
overlaps beyond the end of an AG. When we go to allocate an inode
from that sparse chunk, the irec fails validation because the
agbno of the start of the irec is beyond valid limits for the runt
AG.
Prevent this from happening by taking into account the size of the
runt AG when allocating inode chunks. Also convert the various
checks for valid inode chunk agbnos to use xfs_ag_block_count()
so that they will also catch such issues in the future.
Fixes: 56d1115c9bc7 ("xfs: allocate sparse inode chunks on full chunk allocation failure") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
[djwong: backport to stable because upstream maintainer ignored cc-stable] Link: https://lore.kernel.org/linux-xfs/20241112231539.GG9438@frogsfrogsfrogs/ Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For many use cases (e.g. container images are just fetched from remote),
performance will be impacted if underlay page cache is up-to-date but
direct i/o flushes dirty pages first.
Instead, let's use buffered I/O by default to keep in sync with loop
devices and add a (re)mount option to explicitly give a try to use
direct I/O if supported by the underlying files.
The container startup time is improved as below:
[workload] docker.io/library/workpress:latest
unpack 1st run non-1st runs
EROFS snapshotter buffered I/O file 4.586404265s 0.308s 0.198s
EROFS snapshotter direct I/O file 4.581742849s 2.238s 0.222s
EROFS snapshotter loop 4.596023152s 0.346s 0.201s
Overlayfs snapshotter 5.382851037s 0.206s 0.214s
The calculation determining whether to use three- or four-level paging
didn't account for KMSAN modules metadata. Include this metadata in the
virtual memory size calculation to ensure correct paging mode selection
and avoiding potentially unnecessary physical memory size limitations.
Fixes: 65ca73f9fb36 ("s390/mm: define KMSAN metadata for vmalloc and modules") Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dlserver time is accounted when:
- dlserver is active and the dlserver proxies the cfs task.
- dlserver is active but deferred and cfs task runs after being picked
through the normal fair class pick.
dl_server_update is called in two places to make sure that both the
above times are accounted for. But it doesn't check if dlserver is
active or not. Now that we have this dl_server_active flag, we can
consolidate dl_server_update into one place and all we need to check is
whether dlserver is active or not. When dlserver is active there is only
two possible conditions:
- dlserver is deferred.
- cfs task is running on behalf of dlserver.
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Max Kellermann recently reported psi_group_cpu.tasks[NR_MEMSTALL] is
incorrect in the 6.11.9 kernel.
The root cause appears to be that, since the problematic commit, bio
can be NULL, causing psi_memstall_leave() to be skipped in
z_erofs_submit_queue().
Since commit f63b94be6942 ("i2c: pnx: Fix potential deadlock warning
from del_timer_sync() call in isr") jiffies are stored in
i2c_pnx_algo_data.timeout, but wait_timeout and wait_reset are still
using it as milliseconds. Convert jiffies back to milliseconds to wait
for the expected amount of time.
Fixes: f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When drivers access P2SB device resources, it calls p2sb_bar(). Before
the commit 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls
during PCI device probe"), p2sb_bar() obtained the resources and then
called pci_stop_and_remove_bus_device() for clean up. Then the P2SB
device disappeared. The commit 5913320eb0b3 introduced the P2SB device
resource cache feature in the boot process. During the resource cache,
pci_stop_and_remove_bus_device() is called for the P2SB device, then the
P2SB device disappears regardless of whether p2sb_bar() is called or
not. Such P2SB device disappearance caused a confusion [1]. To avoid the
confusion, avoid the pci_stop_and_remove_bus_device() call when the BIOS
does not hide the P2SB device.
For that purpose, cache the P2SB device resources only if the BIOS hides
the P2SB device. Call p2sb_scan_and_cache() only if p2sb_hidden_by_bios
is true. This allows removing two branches from p2sb_scan_and_cache().
When p2sb_bar() is called, get the resources from the cache if the P2SB
device is hidden. Otherwise, read the resources from the unhidden P2SB
device.
Reported-by: Daniel Walker (danielwa) <danielwa@cisco.com> Closes: https://lore.kernel.org/lkml/ZzTI+biIUTvFT6NC@goliath/ [1] Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-5-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
To prepare for the following fix, move the code to hide and unhide the
P2SB device from p2sb_cache_resources() to p2sb_scan_and_cache().
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-4-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
To prepare for the following fix, introduce the global flag
p2sb_hidden_by_bios. Check if the BIOS hides the P2SB device and store
the result in the flag. This allows to refer to the check result across
functions.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-3-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
To prepare for the following fix, factor out the code to read the P2SB
resource from the cache to the new function p2sb_read_from_cache().
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-2-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent and Dietmar noted that while
commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes
the entity runnable stats, it does not adjust the cfs_rq runnable stats,
which are based off of h_nr_running.
Track h_nr_delayed such that we can discount those and adjust the
signal.
Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/ Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/
[ Fixes checkpatch warnings and rebased ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in
pick_next_entity().
Moving clear_buddies() up before the delayed dequeue bits ensures
no ->next buddy becomes delayed. Further ensure no new ->next buddy
ever starts as delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Reported-by: Adam Li <adamli@os.amperecomputing.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Adam Li <adamli@os.amperecomputing.com> Link: https://lkml.kernel.org/r/670a0d54-e398-4b1f-8a6e-90784e2fdf89@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
Reported-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Artem Metla <ametla@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 32-bit x86 builds CONFIG_STATIC_CALL_INLINE isn't set, leading to
static_call_initialized not being available.
Define it as "0" in that case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hypercall page is no longer needed. It can be removed, as from the
Xen perspective it is optional.
But, from Linux's perspective, it removes naked RET instructions that
escape the speculative protections that Call Depth Tracking and/or
Untrain Ret are trying to achieve.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add generic hypercall functions usable for all normal (i.e. not iret)
hypercalls. Depending on the guest type and the processor vendor
different functions need to be used due to the to be used instruction
for entering the hypervisor:
- PV guests need to use syscall
- HVM/PVH guests on Intel need to use vmcall
- HVM/PVH guests on AMD and Hygon need to use vmmcall
As PVH guests need to issue hypercalls very early during boot, there
is a 4th hypercall function needed for HVM/PVH which can be used on
Intel and AMD processors. It will check the vendor type and then set
the Intel or AMD specific function to use via static_call().
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syscall instruction is used in Xen PV mode for doing hypercalls.
Allow syscall to be used in the kernel in case it is tagged with an
unwind hint for objtool.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to be able to differentiate between AMD and Intel based
systems for very early hypercalls without having to rely on the Xen
hypercall page, make get_cpu_vendor() non-static.
Refactor early_cpu_init() for the same reason by splitting out the
loop initializing cpu_devs() into an externally callable function.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: d50b7914fae0 ("xen-netfront: Fix NULL sring after live migration") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com> Co-developed-by: Joey Gouly <joey.gouly@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
[maz: adapted to lack of ID_FILTERED()] Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
For storing a value to a queue attribute, the queue_attr_store function
first freezes the queue (->q_usage_counter(io)) and then acquire
->sysfs_lock. This seems not correct as the usual ordering should be to
acquire ->sysfs_lock before freezing the queue. This incorrect ordering
causes the following lockdep splat which we are able to reproduce always
simply by accessing /sys/kernel/debug file using ls command:
[ 57.597146] WARNING: possible circular locking dependency detected
[ 57.597154] 6.12.0-10553-gb86545e02e8c #20 Tainted: G W
[ 57.597162] ------------------------------------------------------
[ 57.597168] ls/4605 is trying to acquire lock:
[ 57.597176] c00000003eb56710 (&mm->mmap_lock){++++}-{4:4}, at: __might_fault+0x58/0xc0
[ 57.597200]
but task is already holding lock:
[ 57.597207] c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4
[ 57.597226]
which lock already depends on the new lock.
Prevent the above lockdep warning by acquiring ->sysfs_lock before
freezing the queue while storing a queue attribute in queue_attr_store
function. Later, we also found[1] another function __blk_mq_update_nr_
hw_queues where we first freeze queue and then acquire the ->sysfs_lock.
So we've also updated lock ordering in __blk_mq_update_nr_hw_queues
function and ensured that in all code paths we follow the correct lock
ordering i.e. acquire ->sysfs_lock before freezing the queue.
Registering and unregistering cpuhp callback requires global cpu hotplug lock,
which is used everywhere. Meantime q->sysfs_lock is used in block layer
almost everywhere.
It is easy to trigger lockdep warning[1] by connecting the two locks.
Fix the warning by moving blk-mq's cpuhp callback registering out of
q->sysfs_lock. Add one dedicated global lock for covering registering &
unregistering hctx's cpuhp, and it is safe to do so because hctx is
guaranteed to be live if our request_queue is live.
When using svcr_in to check ZA and Streaming Mode, we should make sure
that the value in x2 is correct, otherwise it may trigger an Illegal
instruction if FEAT_SVE and !FEAT_SME.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test") Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241211111639.12344-1-o451686892@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After a recent change to clamp() and its variants [1] that increases the
coverage of the check that high is greater than low because it can be
done through inlining, certain build configurations (such as s390
defconfig) fail to build with clang with:
block/blk-iocost.c:1101:11: error: call to '__compiletime_assert_557' declared with 'error' attribute: clamp() low limit 1 greater than high limit active
1101 | inuse = clamp_t(u32, inuse, 1, active);
| ^
include/linux/minmax.h:218:36: note: expanded from macro 'clamp_t'
218 | #define clamp_t(type, val, lo, hi) __careful_clamp(type, val, lo, hi)
| ^
include/linux/minmax.h:195:2: note: expanded from macro '__careful_clamp'
195 | __clamp_once(type, val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
| ^
include/linux/minmax.h:188:2: note: expanded from macro '__clamp_once'
188 | BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
| ^
__propagate_weights() is called with an active value of zero in
ioc_check_iocgs(), which results in the high value being less than the
low value, which is undefined because the value returned depends on the
order of the comparisons.
The purpose of this expression is to ensure inuse is not more than
active and at least 1. This could be written more simply with a ternary
expression that uses min(inuse, active) as the condition so that the
value of that condition can be used if it is not zero and one if it is.
Do this conversion to resolve the error and add a comment to deter
people from turning this back into clamp().
That pool implementation doesn't really work: if the krealloc happens to
move the memory and return another address, the entries in the xarray
become invalid, leading to use-after-free later:
BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe]
Read of size 4 at addr ffff8881244b2590 by task modprobe/2753
Allocated by task 2753:
kasan_save_stack+0x39/0x70
kasan_save_track+0x14/0x40
kasan_save_alloc_info+0x37/0x60
__kasan_kmalloc+0xc3/0xd0
__kmalloc_node_track_caller_noprof+0x200/0x6d0
krealloc_noprof+0x229/0x380
Simplify the code to fix the bug. A better pooling strategy may be added
back later if needed.
The blamed commit changed the dsa_8021q_rcv() calling convention to
accept pre-populated source_port and switch_id arguments. If those are
not available, as in the case of tag_ocelot_8021q, the arguments must be
pre-initialized with -1.
Due to the bug of passing uninitialized arguments in tag_ocelot_8021q,
dsa_8021q_rcv() does not detect that it needs to populate the
source_port and switch_id, and this makes dsa_conduit_find_user() fail,
which leads to packet loss on reception.
Fixes: dcfe7673787b ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
