pbx.c: prevent potential crash from recursive replace()
Recurisve usage of replace() resulted in corruption of the
temporary string storage and potential crash. By changing
the string to be allocated separtely per instance, this is
eliminated.
ASTERISK-23650 #comment Reported by: Roel van Meer
ASTEIRSK-23650 #close
Richard Mudgett [Fri, 16 May 2014 17:23:42 +0000 (17:23 +0000)]
sig_pri.c: Pull the pri_dchannel() PRI_EVENT_RING case into its own function.
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
Richard Mudgett [Thu, 15 May 2014 21:44:34 +0000 (21:44 +0000)]
app_meetme: Fix overwrite of DAHDI conference data structure.
Starting a conference recording using the admin menu overwrites the DAHDI
conference data structure used to modify the admin user's conference mute
mode.
* Made no longer pass the user's DAHDI conference data structure into the
menu functions. The menu now uses its own DAHDI conference data
structure to start the recording channel.
* Moved the unlock conf->playlock to before playing the conf-full message.
No sense keeping the lock while that prompt is playing. The user is never
going to get into the conference at that point.
........
Merged revisions 413991 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Walter Doekes [Thu, 15 May 2014 15:51:42 +0000 (15:51 +0000)]
Blocked revisions 413949
> Apparently this was already fixed in Asterisk 11.
> https://reviewboard.asterisk.org/r/1944/ (r368519, 2012-06-05 16:41:43 +0200)
........
chan_local+app_dial: Propagagate call answered elsewhere over local channels.
AST_FLAG_ANSWERED_ELSEWHERE was not propagated back from local channels.
It is now. That means that when a call is picked up from a callgroup of
local channels, the other channels will now properly see it as "picked up".
This occurs when you use a construct like Dial(Local/a@context&Local/b@context)
where a@context and b@context dial two chan_sip devices respectively. If one
device picks up, the other will not see "1 missed call" anymore. In this
respect, it now behaves the same as when doing Dial(SIP/a&SIP/b).
Walter Doekes [Wed, 14 May 2014 15:31:27 +0000 (15:31 +0000)]
res_musiconhold: Minor cleanup.
Fix a few free()'s that should be ast_free()'s. Reverted an old
workaround that isn't necessary. Reorder a tiny bit of code.
Remove a bit of commented-out code.
Walter Doekes [Tue, 13 May 2014 13:32:46 +0000 (13:32 +0000)]
rtp: Fix case typo in H263+ mime.
http://tools.ietf.org/html/rfc3555#section-4.2.6 says the canonical
mime subtype is "H263-1998", not "h263-1998". Original code was added
in r183101 on 2009-03-19 02:26:50 +0100.
This fixes issues with Polycom phones.
ASTERISK-23665 #close
ASTERISK-23665 #comment Patch r3529.patch uploaded by Guillaume Maudoux, backported by me.
Review: https://reviewboard.asterisk.org/r/3529/
........
Merged revisions 413787 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Mon, 12 May 2014 23:48:13 +0000 (23:48 +0000)]
chan_dahdi/sig_pri: Prevent unnecessary PROGRESS events when overlap dialing is enabled.
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
Kinsey Moore [Fri, 9 May 2014 22:28:40 +0000 (22:28 +0000)]
Allow Asterisk to compile under GCC 4.10
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
........
Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Jonathan Rose [Fri, 9 May 2014 16:10:14 +0000 (16:10 +0000)]
app_chanspy: Fix a bug where Barge mode could fail
If the barge audiohook was attached prior to the spyee and its peer
actually being bridged, the audiohook would not be applied and the
connected peer would not be able to hear audio from the spy when the
spy is in barge mode.
(closes issue ASTERISK-23381)
Reported by: Robert Moss
Review: https://reviewboard.asterisk.org/r/3505/
Mark Michelson [Fri, 2 May 2014 19:50:07 +0000 (19:50 +0000)]
Return the number of rows affected by a SQL insert, rather than an object ID.
The realtime API specifies that the store callback is supposed to return the number
of rows affected. res_config_pgsql was instead returning an Oid cast as an int, which
during any nominal execution would be cast to 0. Returning 0 when more than 0 rows were
inserted causes problems to the function's callers.
To give an idea of how strange code can be, this is the necessary code change to fix
a device state issue reported against chan_pjsip in Asterisk 12+. The issue was that
the registrar would attempt to insert contacts into the database. Because of the 0
return from res_config_pgsql, the registrar would think that the contact was not successfully
inserted, even though it actually was. As such, even though the contact was query-able
and it was possible to call the endpoint, Asterisk would "think" the endpoint was unregistered,
meaning it would report the device state as UNAVAILABLE instead of NOT_INUSE.
The necessary fix applies to all versions of Asterisk, so even though the bug reported
only applies to Asterisk 12+, the code correction is being inserted into 1.8+.
Closes issue ASTERISK-23707
Reported by Mark Michelson
........
Merged revisions 413224 from http://svn.asterisk.org/svn/asterisk/branches/1.8
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
Kinsey Moore [Wed, 30 Apr 2014 13:04:14 +0000 (13:04 +0000)]
Websocket: Add session locking and delay close
This resolves a race condition where data could be written to a NULL
FILE pointer causing a crash as a websocket connection was in the
process of shutting down by adding locking to websocket session writes
and by deferring session teardown until session destruction.
(closes issue ASTERISK-23605)
Review: https://reviewboard.asterisk.org/r/3481/
Reported by: Matt Jordan
Matthew Jordan [Fri, 25 Apr 2014 17:47:21 +0000 (17:47 +0000)]
res_rtp_asterisk: Add support for DTLS handshake retransmissions
On congested networks, it is possible for the DTLS handshake messages to get
lost. This patch adds a timer to res_rtp_asterisk that will periodically
check to see if the handshake has succeeded. If not, it will retransmit the
DTLS handshake.
Richard Mudgett [Wed, 23 Apr 2014 17:51:19 +0000 (17:51 +0000)]
http: Fix spurious ERROR message in responses with no content.
Backport -r411687 and fix the fix because content_length is the length of
out plus the length of the file controlled by fd.
When a response has an out content length of 0, fwrite would be called to
write a buffer with no data in it. This resulted in the following classic
error message:
Kinsey Moore [Mon, 21 Apr 2014 16:13:36 +0000 (16:13 +0000)]
HTTP: Add TCP_NODELAY to accepted connections
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Jonathan Rose [Mon, 21 Apr 2014 15:51:40 +0000 (15:51 +0000)]
chan_sip: Add sendrpid trust options
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Fix wrong dialtone. The "modulation" should not be referenced for tone+tone as it refers to the on-off characteristic - this often resulted in a single tone rather than the multitone as in the UK.
Matthew Jordan [Sat, 19 Apr 2014 01:02:08 +0000 (01:02 +0000)]
app_sms: Fix uninitialized values; hangup channel when REL is sent successfully
This patch fixes two issues in app_sms:
(1) Firstly, the 'flags' field on the stack in sms_exec() is uninitialised,
causing it to use the wrong protocol in some cases. This patch correctly
initializes the flags fields.
(2) Secondly, when disconnect supervision is not working or
inbanddisconnect=yes is set in chan_dahdi.conf, app_sms was failing to
terminate the call after it sent the REL(ease) message and the peer stopped
talking to it. This patch fixes the code to handle the 'bad stop bit'
message more gracefully in that case, and hang up the call.
Review: https://reviewboard.asterisk.org/r/1392/
ASTERISK-18331 #close
Reported by: David Woodhouse
patches:
asterisk-fix-sms.patch uploaded by David Woodhouse (License 5754)
........
Merged revisions 412655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Rusty Newton [Fri, 18 Apr 2014 17:15:27 +0000 (17:15 +0000)]
sounds: Fix Sounds Makefile and XML that didn't support new sound prompt sets
In sounds/Makefile
1 Adds and moves some lines necessary for the en_GB core set. I'm just following how the other sets are defined here.
2 removes the ES extra sounds related lines as we don't have ES extra sound sets.
In sounds/sounds.xml
3 Adds member definitons for EN_AU, EN_GB, IT for core sound sets, and EN_GB in extra sound sets
Matthew Jordan [Thu, 17 Apr 2014 20:06:11 +0000 (20:06 +0000)]
main/Makefile: Fix build failure on SmartOS/Illumos/SunOS
This patch fixes two issues when building on SmartOS:
- channels/chan_oss.c: it makes sure soundcard.h is found
- main/Makefile: only use "-Wl,--version-script" when GNU LD is used as the Sun
Linker doesn't support that. Similar checks are already used elswhere in the
Makefile
Review: https://reviewboard.asterisk.org/r/3426
ASTERISK-23576 #close
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
autoservice acquires a local reference to the logger callid of each channel
in a loop. This local reference was not released, causing the callid of
every channel in autoservice to leak. This change moves the callid unref
inside the loop.
Matthew Jordan [Fri, 11 Apr 2014 02:10:22 +0000 (02:10 +0000)]
main/astobj2: Make REF_DEBUG a menuselect item; improve REF_DEBUG output
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Richard Mudgett [Tue, 8 Apr 2014 21:20:09 +0000 (21:20 +0000)]
Internal timing: Add notice that the -I and internal_timing option are no longer needed.
Add notice messages during execution that the -I command line option and
the astersik.conf internal_timing option are no longer needed. The
internal timing functionality is now always enabled if there is a timing
module loaded.
NOTE: Since the command line options and the asterisk.conf config file are
processed before the logging system is initialized, the messages are
output to stderr.
Change requested as a result of asterisk-dev list comments about the
commit for ASTERISK-22846 that removed the -I and internal_timing options.
Richard Mudgett [Fri, 4 Apr 2014 18:46:18 +0000 (18:46 +0000)]
internal_timing: Remove the option and always make it enabled if a timing module is loaded.
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-23391 caused a regression where the symbol 'defaultlanguage'
was used by app_voicemail but not exported by main/asterisk. This
change renames the variable to ast_defaultlanguage. The variable was
already renamed in Asterisk 12+.
app_queue: Fix a bug where realtime members would be deleted during reload causing waiting callers to get ejected.
This patch causes realtime queue members to remain in queues during the reload process. Previously these
members would be removed causing any waiting callers to be ejected from the queue with a reason of "EXITEMPTY".
Alexandr Anikin [Fri, 28 Mar 2014 17:44:11 +0000 (17:44 +0000)]
process stack command even if gatekeeper client isn't register
don't destroy gatekeeper client if it is not started
don't destroy gatekeeper client in some sort of gatekeeper errors
signal rtp create condition when call cleared before rtp structure created
http: response body often missing after specific request
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
Matthew Jordan [Fri, 28 Mar 2014 04:27:02 +0000 (04:27 +0000)]
res_config_odbc/res_odbc: Fix handling of non-text columns updates with empty values.
This patch fixes setting nullable integer columns to NULL instead of an empty
string, which fails for PostgreSQL, for example. The current code is supposed
to do so, but the check is broken. The patch also allows the first column in
the list to be a nullable integer.
This patch also adds a compatibility setting in res_odbc.conf,
allow_empty_string_in_nontext. It is enabled by default. It should be disabled
for database backends (such as PostgreSQL) that require NULL instead of an
empty string for Integer columns.
Matthew Jordan [Fri, 28 Mar 2014 03:51:34 +0000 (03:51 +0000)]
chan_sip: Add MESSAGE request to allowed methods
The allowed methods advertised by chan_sip did not previously note the MESSAGE
request. Even in Asterisk 1.8, we do accept in-dialog MESSAGE requests; we
should advertise that we support MESSAGE requests.
ASTERISK-23504 #close
ASTERISK-23504 #comment Reported by: Martin Kontsek
ASTERISK-23504 #comment Patch sip.h_patch.diff uploaded by Martin Kontsek (license 6587)
Joshua Colp [Wed, 26 Mar 2014 22:44:11 +0000 (22:44 +0000)]
say: Fix a bug where SayNumber in Polish tries to play incorrect sound.
This change fixes a bug where calling SayNumber with a number divisible by
100 using the Polish language would cause the code to attempt to play a
sound file with an empty name.
Jonathan Rose [Wed, 26 Mar 2014 15:57:36 +0000 (15:57 +0000)]
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior too this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
........
Merged revisions 411189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Kinsey Moore [Tue, 25 Mar 2014 15:52:55 +0000 (15:52 +0000)]
chan_sip: Fix incorrect use of timers
If update_provisional_keepalive() is called while
send_provisional_keepalive_full() is waiting on the PVT lock, then
pvt->provisional_keepalive_sched_id will be changed to a new sched_id
value by update_provisional_keepalive(), but that new sched_id then may
be overwritten with -1 by send_provisional_keepalive_full(), killing
the pvt's reference to a schedule and "leaking" the reference.
(closes issue ASTERISK-22079)
Review: https://reviewboard.asterisk.org/r/3368/
Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
Patches:
provisional_keepalive_fix.diff uploaded by Steve Davies (license 5012)
........
Merged revisions 411088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
g711_free() was introduced in spandsp 0.0.6pre4 and g711_release() became a
noop. I opted not to remove the call to g711_release() since it is harmless
and to call g711_free() if we have a sufficiently recent version of spandsp.
(issue ASTERISK-20149)
Reported by: Alexandr Gordeev
Russ Meyerriecks [Mon, 17 Mar 2014 21:19:49 +0000 (21:19 +0000)]
callerid: Logic error in checksum processing
Callerid checksum-ing was being handled incorrectly here. When the checksum is
calculated to be 0x00, it will perform 0x100-0x00 which results in 0x100. This
value will then fail the otherwise correct callerid message.
This patch changes the logic to simply add the calculated checksum to the
transmitted 2's compliment checksum.
Mark Michelson [Fri, 14 Mar 2014 15:56:43 +0000 (15:56 +0000)]
Prevent delayed astdb syncs.
The syncing thread sleeps for a second before waiting to be
told to attempt to sync again. If a signal were sent during this
sleeping period, we would end up having to wait until the next
sync signal occurred in order to sync up the astdb.
This code rearrangement also ensures that any pending transactions
will be synced prior to Asterisk shutting down.
Patches: db_sync.patch by John Hardin (License #6512)
Richard Mudgett [Wed, 12 Mar 2014 18:35:14 +0000 (18:35 +0000)]
app_confbridge: Make explicitly stop MOH if a user is kicked or hangs up while MOH is playing.
When MOH is playing to a user in a conference and the user is kicked or
hangs up from the conference then the AMI MusicOnHoldStop events didn't
happen. (Asterisk v11 AMI event: MusicOnHold, state:Stop)
(closes issue ASTERISK-23311)
Reported by: Benjamin Keith Ford
Richard Mudgett [Mon, 10 Mar 2014 17:09:42 +0000 (17:09 +0000)]
AST-2014-001: Stack overflow in HTTP processing of Cookie headers.
Sending a HTTP request that is handled by Asterisk with a large number of
Cookie headers could overflow the stack.
Another vulnerability along similar lines is any HTTP request with a
ridiculous number of headers in the request could exhaust system memory.
(closes issue ASTERISK-23340)
Reported by: Lucas Molas, researcher at Programa STIC, Fundacion; and Dr. Manuel Sadosky, Buenos Aires, Argentina
........
Merged revisions 410380 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Kinsey Moore [Mon, 10 Mar 2014 13:18:55 +0000 (13:18 +0000)]
AST-2014-002: chan_sip: Exit early on bad session timers request
This change allows chan_sip to avoid creation of the channel and
consumption of associated file descriptors altogether if the inbound
request is going to be rejected anyway.
Matthew Jordan [Fri, 7 Mar 2014 04:38:47 +0000 (04:38 +0000)]
chan_sip: Allow static realtime members to be qualified during module load.
When a static realtime peer with qualify=yes is loaded, Asterisk will fail to
send an OPTIONS request due to the lastms being equal to 0. This results in
the peer being unable to receive calls from Asterisk because the status is
permanently UNKNOWN.
This patch allows an OPTIONS request to be sent during module load by
ignoring the lastms value on startup only.
Review: https://reviewboard.asterisk.org/r/3294/
(closes issue ASTERISK-17523)
Reported by: Maciej Krajewski
Tested by: wushumasters
patches:
realtime_fix_11.7.0.txt uploaded by Trevor Peirce (license 6112)
........
Merged revisions 410105 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Russell Bryant [Thu, 6 Mar 2014 23:15:42 +0000 (23:15 +0000)]
moh: fix a refcount error with realtime MOH
I observed a crash in res_musiconhold on an Asterisk 11 system using realtime
MOH. Investigation of the backtrace showed a corrupt mohclass, implying that
it got destroyed before the code expected it to. I went looking for reference
counting errors that could have caused this crash and this patch this result.
It contains 2 changes.
1) Remove a usless block of code that was impossible to reach. There was even
a comment indicating that it was impossible to reach. The conditional includes
"!ast_test_flag(global_flags, MOH_CACHERTCLASSES)" and it's inside of an if
block with the opposite check "ast_test_flag(global_flags,
MOH_CACHERTCLASSES)". There's no good reason to keep it around.
2) A similar block to #1 contained a reference counting error. It stores
state->class in the local variable mohclass without increasing its reference
count. The reference count on mohclass is decremented at the end of the
function. This block of code probably very rarely runs, which would help
explain why this system was working fine for many months before experiencing a
crash.
Matthew Jordan [Thu, 6 Mar 2014 01:58:10 +0000 (01:58 +0000)]
res_fax_spandsp: Fix crash when passing ulaw/alaw data to spandsp
When acting as a T.38 fax gateway, res_fax_spandsp would at times cause a crash
in libspandsp. This would occur when, during fax tone detection, a ulaw/alaw
frame would be passed to modem_connect_tones_rx. That particular routine
expects the data to be in slin format. This patch looks at the frame type and,
if the data is ulaw/alaw, converts the format to slin before passing it to
modem_connect_tones_rx.
Review: https://reviewboard.asterisk.org/r/3296
(closes issue ASTERISK-20149)
Reported by: Alexandr Gordeev
Tested by: Michal Rybarik
patches:
spandsp_g711decode.diff uploaded by Michal Rybarik (license 6578)
Kinsey Moore [Wed, 5 Mar 2014 20:37:51 +0000 (20:37 +0000)]
config: Fix inverted test
The test of the result of the stat() call was inverted such that its
output was only used if the call failed. This inverts the test so that
the output of stat() is used correctly. This was causing full reloads
on unchanged files.
(closes issue ASTERISK-23383)
Reported by: David Woolley
........
Merged revisions 409916 from http://svn.asterisk.org/svn/asterisk/branches/1.8
David M. Lee [Wed, 5 Mar 2014 16:55:52 +0000 (16:55 +0000)]
Corrected cross-platform stat nanosecond code
When nanosecond time resolution was added for identifying config file
changes, it didn't cover all of the myriad of ways that one might obtain
nanosecond time resolution off of struct stat.
Rather than complicate the #if even further figuring out one system from
the next, this patch directly tests for the three struct members I know
about today, and #ifdef's accordingly.
Correct RTP handling in chan_unistim and fix transfer process broken in previous fix:
- Fixed too early RTP setup with phone, that cause no ringback tone on caller side
- Handle call transfer cancel only in STATE_CALL case (related to ASTERISK-23073)
Add update_peer function to unistim_rtp_glue, improve other unistim_rtp_glue functions conforming to other channel drivers. Do not forget auto-detected and user-selected phone settings on 'unistim reload'
........
Merged revisions 409705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Moises Silva [Wed, 5 Mar 2014 00:25:44 +0000 (00:25 +0000)]
Fix WebRTC over WSS not working
Several fixes for the WebSockets implementation in res/res_http_websocket.c
* Flush the websocket session FILE* as fwrite() may not actually guarantee sending
the data to the network. If we do not flush, it seems that buffering on the SSL
socket for outbound messages causes issues
* Refactored ast_websocket_read to take into account that SSL file descriptors
may be ready to read via fread() but poll() will not actually say so because
the data was already read from the network buffers and is now in the libc buffers
func_audiohookinheritance: Check If A Channel Was Specified
This patch prevents a crash when using the function audiohookinheritance without
setting the channel.
(closes issue ASTERISK-23104)
Reported by: Joel Vandal
Tested by: Joel Vandal
Patches:
asterisk-23104_audiohook_inherit_no_channel-11.diff
uploaded by Michael L. Young (license 5026)
Kinsey Moore [Tue, 4 Mar 2014 16:51:11 +0000 (16:51 +0000)]
AO2: Add an assert for bad objects
This adds an assert that will only be active if Asterisk is compiled
with DO_CRASH and allows the testsuite to fail tests that would
otherwise require log file parsing.
........
Merged revisions 409566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Kinsey Moore [Tue, 4 Mar 2014 15:35:49 +0000 (15:35 +0000)]
rtp_engine: Clean up after a failed remote bridge
Upon failure of an INVITE transaction meant to initiate a remote native
bridge, rtp_engine.c would not clean up non-reference-counted bridge
instance pointers leaving a dangling pointer which was being used to
perform a local native bridge after the other channel had hung up. This
lead to dereferencing into freed memory and plenty of AO2 errors. This
change allows the remote native bridge loop to clean up properly when
the bridge fails.
(closes issue ASTERISK-23310)
Reported by: Jeremy Laine
........
Merged revisions 409521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Tzafrir Cohen [Sun, 2 Mar 2014 12:26:17 +0000 (12:26 +0000)]
Makefile: replace -O6 with -O3
-O6 is not a legal option of gcc. Unofficially gcc considers it to be
equivalent of -O3. clang chalks on it, though. This commit sets the
default optimization flag to be -O3, like gcc actually considered it.
Kinsey Moore [Fri, 28 Feb 2014 21:13:49 +0000 (21:13 +0000)]
app_queue: Fix documentation generation
The documentation for QueueMemberPaused was causing documentation
generation to fail because the documentation for that AMI event was in
the wrong location. This moves that documentation the correct location
and adds a missing parameter.
Jonathan Rose [Thu, 27 Feb 2014 19:19:02 +0000 (19:19 +0000)]
res_rtp_asterisk: Fix checklist creating problems in ICE sessions
Prior to this patch, local candidate lists including SRFLX would fail to start
properly when building ICE candidate check lists. This patch fixes that problem
by making sure that each SRFLX candidate is associated with the proper
base address so that the check list can create matches properly.
This patch was written by jcolp. The issue will be left open to await testing
by the issue participants.
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
David M. Lee [Thu, 27 Feb 2014 16:24:20 +0000 (16:24 +0000)]
Fix memory stomping bug in astman.
This memset complained in dev mod on my Ubuntu box. The memset is both
unnecessary and dangerous. At this point, m hasn't been initialized
yet, so the memset will write off to whatever address happens to be
on the stack at the time.
........
Merged revisions 409077 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Corey Farrell [Thu, 27 Feb 2014 16:03:56 +0000 (16:03 +0000)]
res_fax: Warn that minrate=2400 is not valid for V.27 instead of failing load.
Change minrate from 2400 to 4800 on config reload in response to changes from
ASTERISK-22790 only. Any config with minrate of 2400 that would fail before
r405693 will still fail.
Comment out many settings in res_fax.conf.sample. The defaults are set in
res_fax.c, so setting the same value in sample config does nothing but make
the sample config more fragile.
(closes issue ASTERISK-23231)
Reported by: David Brillert
Review: https://reviewboard.asterisk.org/r/3261/
........
Merged revisions 409052 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Thu, 27 Feb 2014 12:47:29 +0000 (12:47 +0000)]
rtp_engine: fix crash during remote native bridging when calling get_codecs
When two RTP channels are in a remote bridge, the remote bridging loop in
rtp_engine will periodically check to see if the two channels can still be
bridged. One of the many things it checks is whether or not the codecs have
changed on the channel. If the codec has changed, it will break out of the
loop to re-determine which type of bridge is appropriate.
In order to perform this check, the ast_rtp_glue virtual table's get_codec
callback is called for each channel. The callback implementations assume
that the channel tech private is valid when called; as such, there has
always been some code in place to check whether or not the channel pvt is
NULL before calling. However, this check is insufficient.
The channels are unlocked during the remote bridging loop. It is possible
for a channel to get masqueraded between the check for the pvt being NULL and
the actual call to get_codec. When this occurs, the callback is called with a
ZOMBIE channel, which now has a NULL pvt. Crash.
While this has always been possible in Asterisk 1.8, it is much more likely to
occur in Asterisk 11 and later versions due to the timing changes that occur
when getting the codec from a channel. Note that this is much more likely to be
reproduced on slow, boggy hardware running Asterisk 11 - but fairly rarely
otherwise.
Also Note: This crash was also caught by the various SIP blind transfer tests,
in addition to the bug report Alec filed.
Review: https://reviewboard.asterisk.org/r/3247/
(closes issue ASTERISK-21737)
Reported by: Alec Davis
Tested by: Alec Davis
........
Merged revisions 409001 from http://svn.asterisk.org/svn/asterisk/branches/1.8
projects / thirdparty / asterisk.git / log
