In the function mana_ib_gd_create_dma_region if there are no dma blocks
to process the variable `err` remains uninitialized.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Kees Bakker <kees@ijzerbout.nl> Link: https://patch.msgid.link/20250221195833.7516C16290A@bout3.ijzerbout.nl Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It turns out that while s390 architecture calls its memory-I/O mapping
variants write-through and write-back the implementation of ioremap_wt()
and pgprot_writethrough() does not match Linux notion of ioremap_wt().
In particular Linux expects ioremap_wt() to be weaker still than
ioremap_wc(), allowing not just gathering and re-ordering but also reads
to be served from cache. Instead s390's implementation is equivalent to
normal ioremap() while its ioremap_wc() allows re-ordering.
Note that there are no known users of ioremap_wt() on s390 and the
resulting behavior is in line with asm-generic defining ioremap_wt() as
ioremap(), if undefined, so no breakage is expected.
As s390 does not have a mapping type matching the Linux notion of
ioremap_wt() and pgprot_writethrough(), simply drop them and rely on the
asm-generic fallbacks instead.
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c77e6 ("clk: qcom: Add Global Clock Controller driver for MSM8953") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Saving and restoring of the intermediate results are needed if there is
context switch caused by another ongoing request on the same engine.
This is therefore not only to support import/export functionality.
Hence, save and restore the intermediate result for every non-first task.
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061c4 ("drivers/clk: convert VL struct to struct_size") Signed-off-by: Will McVicker <willmcvicker@google.com> Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the RZ/G3S SoC, the CPU PLL settings can be set and retrieved through
the CPG_PLL1_CLK1 and CPG_PLL1_CLK2 registers. However, these settings
are applied only when CPG_PLL1_SETTING.SEL_PLL1 is set to 0.
Otherwise, the CPU PLL operates at the default frequency of 1.1 GHz.
Hence add support to the PLL driver for returning the 1.1 GHz frequency
when the CPU PLL is configured with the default frequency.
Fixes: 01eabef547e6 ("clk: renesas: rzg2l: Add support for RZ/G3S PLL") Fixes: de60a3ebe410 ("clk: renesas: Add minimal boot support for RZ/G3S SoC") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250115142059.1833063-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed") Fixes: 2ab640379a0a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3") Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yuxin wang <wang1315768607@163.com> Reported-by: Marius Fleischer <fleischermarius@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/ Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8be3 ("selftests/bpf: Add benchmark for bpf_strncmp() helper") Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix theoretical NULL dereference in linker when resolving *extern*
STT_SECTION symbol against not-yet-existing ELF section. Not sure if
it's possible in practice for valid ELF object files (this would require
embedded assembly manipulations, at which point BTF will be missing),
but fix the s/dst_sym/dst_sec/ typo guarding this condition anyways.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs") Fixes: a46349227cd8 ("libbpf: Add linker extern resolution support for functions and global variables") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20250220002821.834400-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Only go into the if condition for single-PD handling when there's
actually just one power domain specified there. Otherwise it'll be an
issue in the dts and we should fail in the regular code path.
This also mirrors the latest changes in the qcom_q6v5_mss driver.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org> Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-2-85d9ae4b0093@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Suppress binding attributes for the rzg2l pinctrl driver, as it is an
essential block for Renesas SoCs. Unbinding the driver leads to
warnings from __device_links_no_driver() and can eventually render the
system inaccessible.
Currently, the following two macros have different values:
// The maximal argument count for firmware node reference
#define NR_FWNODE_REFERENCE_ARGS 8
// The maximal argument count for DT node reference
#define MAX_PHANDLE_ARGS 16
It may cause firmware node reference's argument count out of range if
directly assign DT node reference's argument count to firmware's.
drivers/of/property.c:of_fwnode_get_reference_args() is doing the direct
assignment, so may cause firmware's argument count @args->nargs got out
of range, namely, in [9, 16].
Fix by increasing NR_FWNODE_REFERENCE_ARGS to 16 to meet DT requirement.
Will align both macros later to avoid such inconsistency.
Fixes: 3e3119d3088f ("device property: Introduce fwnode_property_get_reference_args") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20250225-fix_arg_count-v4-1-13cdc519eb31@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is case as below could trigger kernel dump:
Use U-Boot to start remote processor(rproc) with resource table
published to a fixed address by rproc. After Kernel boots up,
stop the rproc, load a new firmware which doesn't have resource table
,and start rproc.
When starting rproc with a firmware not have resource table,
`memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will
trigger dump, because rproc->cache_table is set to NULL during the last
stop operation, but rproc->table_sz is still valid.
This issue is found on i.MX8MP and i.MX9.
Dump as below:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __pi_memcpy_generic+0x110/0x22c
lr : rproc_start+0x88/0x1e0
Call trace:
__pi_memcpy_generic+0x110/0x22c (P)
rproc_boot+0x198/0x57c
state_store+0x40/0x104
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x120/0x1cc
vfs_write+0x240/0x378
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xcc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Clear rproc->table_sz to address the issue.
Fixes: 9dc9507f1880 ("remoteproc: Properly deal with the resource table when detaching") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20250319100106.3622619-1-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to
unsigned long to support values larger than 31 and avoid overflow.
For example: If we try to register 4GB of memory that is contiguous in
physical memory, the driver will optimize the page_size and try to use
an mkey with 4GB entity size. The 'unsigned int' page_size variable will
overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr().
During encryption and decryption, user requests
must be checked first, if the specifications that
are not supported by the hardware are used, the
software computing is used for processing.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The intermediate results for HMAC is stored in the allocated keyslot by
the hardware. Dynamic allocation of keyslot during an operation is hence
not possible. As the number of keyslots are limited in the hardware,
fallback to the HMAC software implementation if keyslots are not available
Initialize and check the return value in hash *do_one_req() functions
and exit the function if there is an error. This fixes the
'uninitialized variable' warnings reported by testbots.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202412071747.flPux4oB-lkp@intel.com/ Fixes: 0880bb3b00c8 ("crypto: tegra - Add Tegra Security Engine driver") Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The buffer which sends the commands to host1x was shared for all tasks
in the engine. This causes a problem with the setkey() function as it
gets called asynchronous to the crypto engine queue. Modifying the same
cmdbuf in setkey() will corrupt the ongoing host1x task and in turn
break the encryption/decryption operation. Hence use a separate cmdbuf
for setkey().
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices") Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b1e ("mdacon messing up default vc's - set default to vc13-16 again") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
dummycon fails to build on ARM/footbridge when the VGA console is
disabled, since I got the dependencies slightly wrong in a previous
patch:
drivers/video/console/dummycon.c: In function 'dummycon_init':
drivers/video/console/dummycon.c:27:25: error: 'CONFIG_DUMMY_CONSOLE_COLUMNS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
27 | #define DUMMY_COLUMNS CONFIG_DUMMY_CONSOLE_COLUMNS
drivers/video/console/dummycon.c:28:25: error: 'CONFIG_DUMMY_CONSOLE_ROWS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
28 | #define DUMMY_ROWS CONFIG_DUMMY_CONSOLE_ROWS
This only showed up after many thousand randconfig builds on Arm, and
doesn't matter in practice, but should still be fixed. Address it by
using the default row/columns on footbridge after all in that corner
case.
Fixes: 4293b0925149 ("dummycon: limit Arm console size hack to footbridge") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409151512.LML1slol-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60edee ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
__resource_resize_store() attempts to release all resources of the device
before attempting the resize. The loop, however, only covers standard BARs
(< PCI_STD_NUM_BARS). If a device has VF BARs that are assigned,
pci_reassign_bridge_resources() finds the bridge window still has some
assigned child resources and returns -NOENT which makes
pci_resize_resource() to detect an error and abort the resize.
Change the release loop to cover all resources up to VF BARs which allows
the resize operation to release the bridge windows and attempt to assigned
them again with the different size.
If SR-IOV is enabled, disallow resize as it requires releasing also IOV
resources.
Link: https://lore.kernel.org/r/20250320142837.8027-1-ilpo.jarvinen@linux.intel.com Fixes: 91fa127794ac ("PCI: Expose PCIe Resizable BAR support via sysfs") Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: b5c764d6ed55 ("drm/amd/display: Use HW lock mgr for PSR1") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: Sun peng Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long. The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long. The error codes end up being positive instead of
negative and the callers treat them as success.
Fixes: 81cc7e51c4f1 ("drm/mediatek: Allow commands to be sent during video mode") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function mtk_dp_wait_hpd_asserted() may be called before the
`mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach().
Specifically it can be called via this callpath:
- mtk_edp_wait_hpd_asserted
- [panel probe]
- dp_aux_ep_probe
Using "drm" level prints anywhere in this callpath causes a NULL
pointer dereference. Change the error message directly in
mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the
error messages in mtk_dp_parse_capabilities(), which is called by
mtk_dp_wait_hpd_asserted().
While touching these prints, also add the error code to them to make
future debugging easier.
When CONFIG_MTK_CMDQ is enabled, if the display is controlled by the CPU
while other hardware is controlled by the GCE, the display will encounter
a mbox request channel failure.
However, it will still enter the CONFIG_MTK_CMDQ statement, causing the
config_updating flag to never be set to false. As a result, no page flip
event is sent back to user space, and the screen does not update.
In relocate_32.S, function clear_utlb_entry() goes into real mode. To
do so, it has to calculate the physical address based on the virtual
address. To get the virtual address it uses 'bl' which is problematic
(see commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption
in __get_datapage()")). In addition, the calculation is done on a
wrong address because 'bl' loads LR with the address of the following
instruction, not the address of the target. So when the target is not
the instruction following the 'bl' instruction, it may lead to
unexpected behaviour.
Fix it by re-writing the code so that is goes via another path which
is based 'bcl 20,31,.+4' which is the right instruction to use for that.
In fact this is raw data that is after the function end and that is
not text so shouldn't be disassembled as text. But ghashp8-ppc.S is
generated by a perl script and should have been marked as
OBJECT_FILES_NON_STANDARD.
Now that 'bla' is understood as a call instruction, that raw data
is mis-interpreted as an infra-function call.
Mark ghashp8-ppc.o as a OBJECT_FILES_NON_STANDARD to avoid this
warning.
Somehow, possibly as a result of rebase gone badly, setting
nr_indexed_regs for pre-a650 a6xx devices lost the setting of
nr_indexed_regs, resulting in values getting snapshot, but omitted
from the devcoredump.
Fixes: e997ae5f45ca ("drm/msm/a6xx: Mostly implement A7xx gpu_state") Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/640289/ Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
After d88f521da3ef ("PCI: Allow userspace to query and set device reset
mechanism"), userspace can disable reset of specific PCI devices by writing
an empty string to the sysfs reset_method file.
However, pci_slot_resettable() does not check pci_reset_supported(), which
means that pci_reset_function() will still reset the device even if
userspace has disabled all the reset methods.
I was able to reproduce this issue with a vfio device passed to a qemu
guest, where I had disabled PCI reset via sysfs.
Add an explicit check of pci_reset_supported() in both
pci_slot_resettable() and pci_bus_resettable() to ensure both the reset
status and reset execution are bypassed if an administrator disables it for
a device.
Link: https://lore.kernel.org/r/20250207205600.1846178-1-naravamudan@nvidia.com Fixes: d88f521da3ef ("PCI: Allow userspace to query and set device reset mechanism") Signed-off-by: Nishanth Aravamudan <naravamudan@nvidia.com>
[bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Raphael Norwitz <raphael.norwitz@nutanix.com> Cc: Amey Narkhede <ameynarkhede03@gmail.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Yishai Hadas <yishaih@nvidia.com> Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
The platform supports enabling and disabling regulators only on
ports below the Root Complex.
Thus, we need to verify this both when adding and removing the bus,
otherwise regulators may be disabled prematurely when a bus further
down the topology is removed.
Fixes: 9e6be018b263 ("PCI: brcmstb: Enable child bus device regulators from DT") Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250214173944.47506-6-james.quinlan@broadcom.com
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
Fixes: 9e6be018b263 ("PCI: brcmstb: Enable child bus device regulators from DT") Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20250214173944.47506-5-james.quinlan@broadcom.com
[kwilczynski: commit log, use comma in the message to match style with
other similar messages] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Hans Zhang <hans.zhang@cixtech.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit addresses a circular locking dependency in the
svm_range_cpu_invalidate_pagetables function. The function previously
held a lock while determining whether to perform an unmap or eviction
operation, which could lead to deadlocks.
Fixes the below:
[ 223.418794] ======================================================
[ 223.418820] WARNING: possible circular locking dependency detected
[ 223.418845] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 223.418869] ------------------------------------------------------
[ 223.418889] kfdtest/3939 is trying to acquire lock:
[ 223.418906] ffff8957552eae38 (&dqm->lock_hidden){+.+.}-{3:3}, at: evict_process_queues_cpsch+0x43/0x210 [amdgpu]
[ 223.419302]
but task is already holding lock:
[ 223.419303] ffff8957556b83b0 (&prange->lock){+.+.}-{3:3}, at: svm_range_cpu_invalidate_pagetables+0x9d/0x850 [amdgpu]
[ 223.419447] Console: switching to colour dummy device 80x25
[ 223.419477] [IGT] amd_basic: executing
[ 223.419599]
which lock already depends on the new lock.
v2: To resolve this issue, the allocation of the process context buffer
(`proc_ctx_bo`) has been moved from the `add_queue_mes` function to the
`pqm_create_queue` function. This change ensures that the buffer is
allocated only when the first queue for a process is created and only if
the Micro Engine Scheduler (MES) is enabled. (Felix)
Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Cc: Jesse Zhang <jesse.zhang@amd.com> Cc: Yunxiang Li <Yunxiang.Li@amd.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ordering issues here cause an uninitialized (default STANDALONE)
usecase to be programmed (which appears to be a MUX) in some cases
when msm_dsi_host_register() is called, leading to the slave PLL in
bonded-DSI mode to source from a clock parent (dsi1vco) that is off.
This should seemingly not be a problem as the actual dispcc clocks from
DSI1 that are muxed in the clock tree of DSI0 are way further down, this
bit still seems to have an effect on them somehow and causes the right
side of the panel controlled by DSI1 to not function.
In an ideal world this code is refactored to no longer have such
error-prone calls "across subsystems", and instead model the "PLL src"
register field as a regular mux so that changing the clock parents
programmatically or in DTS via `assigned-clock-parents` has the
desired effect.
But for the avid reader, the clocks that we *are* muxing into DSI0's
tree are way further down, so if this bit turns out to be a simple mux
between dsiXvco and out_div, that shouldn't have any effect as this
whole tree is off anyway.
Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When configuring the timing of DSI hosts (interfaces) in
dsi_timing_setup() all values written to registers are taking
bonded-mode into account by dividing the original mode width by 2
(half the data is sent over each of the two DSI hosts), but the full
width instead of the interface width is passed as hdisplay parameter to
dsi_update_dsc_timing().
Currently only msm_dsc_get_slices_per_intf() is called within
dsi_update_dsc_timing() with the `hdisplay` argument which clearly
documents that it wants the width of a single interface (which, again,
in bonded DSI mode is half the total width of the mode) resulting in all
subsequent values to be completely off.
However, as soon as we start to pass the halved hdisplay
into dsi_update_dsc_timing() we might as well discard
msm_dsc_get_slices_per_intf() since the value it calculates is already
available in dsc->slice_count which is per-interface by the current
design of MSM DPU/DSI implementations and their use of the DRM DSC
helpers.
Since SM8250 all downstream sources program clock inverters in
PLL_CLOCK_INVERTERS_1 register and leave the PLL_CLOCK_INVERTERS as
reset value (0x0). The most recent Hardware Programming Guide for 3 nm,
4 nm, 5 nm and 7 nm PHYs also mention PLL_CLOCK_INVERTERS_1.
The driver isn't supposed to consult crtc_state->active/active_check for
resource allocation. Instead all resources should be allocated if
crtc_state->enabled is set. Stop consulting active / active_changed in
order to determine whether the hardware resources should be
(re)allocated.
Commit 47c8846a49ba ("PCI: Extend ACS configurability") introduced bugs
that fail to configure ACS ctrl to the value specified by the kernel
parameter. Essentially there are two bugs:
1) When ACS is configured for multiple PCI devices using 'config_acs'
kernel parameter, it results into error "PCI: Can't parse ACS command
line parameter". This is due to a bug that doesn't preserve the ACS
mask, but instead overwrites the mask with value 0.
For example, using 'config_acs' to configure ACS ctrl for multiple BDFs
fails:
This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios. Use the correct name when the
enable GPIO is not found.
Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
Link: https://lore.kernel.org/r/e12898835f25234561c9d7de4435590d957b85d9.1734924854.git.dns@arista.com Fixes: 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free") Signed-off-by: Daniel Stodden <dns@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.
Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.
To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.
Commit 566f1dd52816 ("PCI: Relax bridge window tail sizing rules")
relaxed bridge window tail alignment rule for the non-optional part
(size0, no add_size/add_align). The change, however, also overwrote
add_align, which is only related to case where optional size1 related
entry is added into realloc head.
We can see that the window to 0006:03 gets shrunken too much and 0006:04
eats away the window for 0006:03:00.2.
The offending commit distributes the upstream bridge's resources multiple
times to every downstream bridge, hence makes the aperture smaller than
desired because calculation of io_per_b, mmio_per_b and mmio_pref_per_b
becomes incorrect.
Instead, distribute downstream bridges' own resources to resolve the issue.
Link: https://lore.kernel.org/r/20241204022457.51322-1-kaihengf@nvidia.com Fixes: 7180c1d08639 ("PCI: Distribute available resources for root buses, too") Link: https://bugzilla.kernel.org/show_bug.cgi?id=219540 Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Carol Soto <csoto@nvidia.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return an error if the IP version doesn't match otherwise
we end up passing a NULL string to amdgpu_ucode_request.
We should never hit this in practice today since we only
enable the umsch code on the supported IP versions, but
add a check to be safe.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502130406.iWQ0eBug-lkp@intel.com/ Fixes: 020620424b27 ("drm/amd: Use a constant format string for amdgpu_ucode_request") Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not
be disabled in any path.
The return value of clk_prepare_enable() is not checked. If mhdp->clk was
not enabled, it may be disabled in the error path of cdns_mhdp_probe()
(e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after
a successful cdns_mhdp_probe() call.
Use the devm_clk_get_enabled() helper function to ensure proper call
balance for mhdp->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com> Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/ Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a typo where V compare incorrectly compares av[] with av[] itself,
which can result in HDCP failure.
The loop of V compare is expected to iterate for 5 times
which compare V array form av[0][] to av[4][].
It should check loop counter reach the last statement "i == 5"
before return true
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The bounding rectangle is adjusted to ensure it aligns to
SSD132X_SEGMENT_WIDTH, which may adjust the pitch. Calculate the pitch
after aligning the left and right edge.
Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-3-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ssd132x buffer is encoded one pixel per nibble, with two pixels in
each byte. When encoding an 8-bit greyscale input, take the top 4-bits
as the value and ensure the two pixels are distinct and do not overwrite
each other.
Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-2-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The only reason for the ssd130x-spi driver to have an spi_device_id table
is that the SPI core always reports an "spi:" MODALIAS, even when the SPI
device has been registered via a Device Tree Blob.
Without spi_device_id table information in the module's metadata, module
autoloading would not work because there won't be an alias that matches
the MODALIAS reported by the SPI core.
This spi_device_id table is not needed for device matching though, since
the of_device_id table is always used in this case. For this reason, the
struct spi_driver .id_table member is currently not set in the SPI driver.
Because the spi_device_id table is always required for module autoloading,
the SPI core checks during driver registration that both an of_device_id
table and a spi_device_id table are present and that they contain the same
entries for all the SPI devices.
Not setting the .id_table member in the driver then confuses the core and
leads to the following warning when the ssd130x-spi driver is registered:
[ 41.091198] SPI driver ssd130x-spi has no spi_device_id for sinowealth,sh1106
[ 41.098614] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1305
[ 41.105862] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1306
[ 41.113062] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1307
[ 41.120247] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1309
[ 41.127449] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1322
[ 41.134627] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1325
[ 41.141784] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1327
[ 41.149021] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1331
To prevent the warning, set the .id_table even though it's not necessary.
Since the check is done even for built-in drivers, drop the condition to
only define the ID table when the driver is built as a module. Finally,
rename the variable to use the "_spi_id" convention used for ID tables.
Each bridge instance creates up to four auxiliary devices with different
names. However, their IDs are always zero, causing duplicate filename
errors when a system has multiple bridges:
Fix this by using a unique instance ID per bridge instance. The
instance ID is derived from the I2C adapter number and the bridge's I2C
address, to support multiple instances on the same bus.
The infamous mmap_lock taken in copy_from/to_user() can be often
problematic when it's called inside another mutex, as they might lead
to deadlocks.
In the case of ALSA timer code, the bad pattern is with
guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which
was mistakenly introduced at converting to guard(), and it had been
carefully worked around in the past.
This patch fixes those pieces simply by moving copy_from/to_user() out
of the register mutex lock again.
For 'ti,j7200-cpb-audio' compatible, there is support for only one PLL for
48k. For 11025, 22050, 44100 and 88200 sampling rates, due to absence of
J721E_CLK_PARENT_44100, we get EINVAL while running any audio application.
Add support for these rates by using the 48k parent clock and adjusting
the clock for these rates later in j721e_configure_refclk.
Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)") Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://patch.msgid.link/20250318113524.57100-1-j-choudhary@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
in top-level HID Makefile is both superfluous (as CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
depends on CONFIG_INTEL_ISH_HID, which contains intel-ish-hid/ already) and wrong (as it's
missing the CONFIG_ prefix).
Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.
Handle spi_setup() return value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 872fc0b6bde8 ("ASoC: cs35l41: Set the max SPI speed for the whole device") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://patch.msgid.link/20250304115643.2748-1-v.shevtsov@mt-integration.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Variable allocated by charlcd_alloc() should be released
by charlcd_free(). The following patch changed kfree() to
charlcd_free() to fix an API misuse.
In allegro_probe(), the v4l2 device is not unregistered in the error
path, which results in a memory leak. Fix it by calling
v4l2_device_unregister() before returning error.
Fixes: d74d4e2359ec ("media: allegro: move driver out of staging") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The HEVC driver needs to set the start_bit field explicitly to avoid
causing corrupted frames when the VP9 decoder is used in parallel. The
reason for this problem is that the VP9 and the HEVC decoder share this
register.
Fixes: cb5dd5a0fa51 ("media: hantro: Introduce G2/HEVC decoder") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
ia32_emulation_override_cmdline() is an early_param() arg and these
are only needed at boot time. In fact, all other early_param() functions
in arch/x86 seem to have '__init' annotation and
ia32_emulation_override_cmdline() is the only exception.
Fixes: a11e097504ac ("x86: Make IA32_EMULATION boot time configurable") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/all/20241210151650.1746022-1-vkuznets%40redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Guest FPUs manage vCPU FPU states. They are allocated via
fpu_alloc_guest_fpstate() and are resized in fpstate_realloc() when XFD
features are enabled.
Since the introduction of guest FPUs, there have been inconsistencies in
the kernel buffer size and xfeatures:
1. fpu_alloc_guest_fpstate() uses fpu_user_cfg since its introduction. See:
69f6ed1d14c6 ("x86/fpu: Provide infrastructure for KVM FPU cleanup") 36487e6228c4 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
2. __fpstate_reset() references fpu_kernel_cfg to set storage attributes.
A recent commit in the tip:x86/fpu tree partially addressed the inconsistency
between (1) and (3) by using fpu_kernel_cfg for size calculation in (1),
but left fpu_guest->xfeatures and fpu_guest->perm still referencing
fpu_user_cfg:
1937e18cc3cf ("x86/fpu: Fix guest FPU state buffer allocation size")
The inconsistencies within fpu_alloc_guest_fpstate() and across the
mentioned functions cause confusion.
Fix them by using fpu_kernel_cfg consistently in fpu_alloc_guest_fpstate(),
except for fields related to the UABI buffer. Referencing fpu_kernel_cfg
won't impact functionalities, as:
1. fpu_guest->perm is overwritten shortly in fpu_init_guest_permissions()
with fpstate->guest_perm, which already uses fpu_kernel_cfg.
2. fpu_guest->xfeatures is solely used to check if XFD features are enabled.
Including supervisor xfeatures doesn't affect the check.
Fixes: 36487e6228c4 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features") Suggested-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Chao Gao <chao.gao@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: David Woodhouse <dwmw2@infradead.org> Link: https://lore.kernel.org/r/20250317140613.1761633-1-chao.gao@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ceb9 ("perf: Split up buffer handling from core code") Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab480
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
added logic that causes resctrl to search for the CLOSID with the fewest dirty
cache lines when creating a new control group, if requested by the arch code.
This depends on the values read from the llc_occupancy counters. The logic is
applicable to architectures where the CLOSID effectively forms part of the
monitoring identifier and so do not allow complete freedom to choose an unused
monitoring identifier for a given CLOSID.
This support missed that some platforms may not have these counters. This
causes a NULL pointer dereference when creating a new control group as the
array was not allocated by dom_data_init().
As this feature isn't necessary on platforms that don't have cache occupancy
monitors, add this to the check that occurs when a new control group is
allocated.
Fixes: 6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Babu Moger <babu.moger@amd.com> Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64 Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Peter Newman <peternewman@google.com> Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64 Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64 Tested-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/20250311183715.16445-2-james.morse@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
