drm/amdgpu: add new compute/mes mqd structure

Add new compute_mqd and mes_mqd structure.
V2: Rename to v12_1_compute_mqd and v12_1_mes_mqd..

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: enlarge the hashtable of kfd_process

This commit enlarges the hashtable size of
kfd_process to 256, because of the multiple
contexts feature allowing each application
create multiple kfd_processes

Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change user queue interface signatures

A userq is associated with its queue manager. Use that and make
the userqueue interfaces to operate on queue.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for sdma v7_1

Add support for SDMA v7.1.0 ip block.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add SDMA 7.1.0 support in KFD

Add support for SDMA 7.1.0 in KFD.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <Alex.Sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update Generate PTE/PDE SDMA packet for SDMA 7.1

Update the Generate PTE/PDE packet fields for SDMA 7.1.

v2: squash in mtype fix (Mukul)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma v7_1_0 support

Add SDMA ip block for SDMA v7_1_0.

v2: squash in queue reset changes (Alex)
v3: squash in version fix (Hawking)
v4: squash in various fixes

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: create pkt header for sdma v7_1

Duplicated from sdma_v6_0_0_pkt_open.h.
Update some pkt for sdma v7_1.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add soc v1_0 common block for IP discovery

add soc v1_0 common block

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add soc v1_0 support

v1_0 is a new generation ip block

v2: squash in doorbell changes (Alex)
v3: squash in xclk, reset placeholders, pcie r|wreg ext callbacks

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reduce the full gpu access time in amdgpu_device_init.

[Why]
function "devm_memremap_pages" in function "kgd2kfd_init_zone_device",
sometimes cost too much time.

[How]
move the function "kgd2kfd_init_zone_device"
after release full gpu access(amdgpu_virt_release_full_gpu).

v2:
improve the coding style.

Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Uninitialized and Unused variables

This patch initialize key variables and removed unused ones.

Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DC to 3.2.360

This version brings along the following updates:
- Add additional checks for PSP footer size
- Correct DSC padding accounting
- Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detection
- Drop FPU flags from dml21_wrapper.c
- Permit DC_FP_START/END only in non-FP compilation units
- Add cursor offload abort to the new HWSS path
- Move dml2_create and init to the non-FPU dml2_wrapper
- Move dml2_validate to the non-FPU dml2_wrapper
- Rename dml2_wrapper.c to dml2_wrapper_fpu.c
- Increase EDID read retries
- Correct comment style
- Move CONNECTOR_ID_PCIE into switch/case
- Drop needless check for link->link_id.id
- Improve readability of link_detect_sink_signal_type
- Don't change brightness for disabled connectors
- Write default Vesa Aux backlight control in dmub
- Refactor panel replay dc libs
- Revise VSC SDP header for Panel Replay
- Fix sending redundant enable command to dmub
- Parse debug flag to PR FW
- Add AS-SDP v2 support for eDP feature
- Refactor panel replay set dmub cmd flow
- Improve HDMI info retrieval
- Check NULL before accessing

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.1.37.0

Add a new disallow_time_us state and a new legacy_method_no_fams2 flag
to fam2.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add additional checks for PSP footer size

[WHY & HOW]
Newer ASICs have different PSP footer sizes which lead to driver
failing to locate the DMCUB FW meta info, which in turn causes
improper DMCUB FW loading and causes DMCUB to crash.

Add support for custom PSP footer sizes and check 512B by default
as well.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct DSC padding accounting

[WHY]
- After the addition of all OVT patches, DSC padding was being accounted
  for multiple times, effectively doubling the padding
- This caused compliance failures or corruption

[HOW]
- Add padding to DSC pic width when required by HW, and do not re-add
  when calculating reg values
- Do not add padding when computing PPS values, and instead track padding
  separately to add when calculating slice width values

Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units

[WHAT]
Test the existing CPP macro _LINUX_FPU_COMPILATION_UNIT, which is set
when building source files that are permitted to use floating point,
in the implementation of DC_FP_START/END so that those are only usable
in non-FP code. This is a requirement of the generic kernel mode FPU
API, as some architectures (i.e., arm64) cannot safely enable FP codegen
in arbitrary code.

Cc: Austin Zheng <austin.zheng@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop FPU flags from dml21_wrapper.c

[WHAT]
The existing CFLAGS_ lines were pointing to a wrong location
for dml21_wrapper.c and were thereby ineffective. This means
dml21_wrapper.c is not an FPU compilation unit. Remove the
(erroneous) CFLAGS_ entries.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move dml2_create and init to the non-FPU dml2_wrapper

[WHAT]
dml2_init calls DC_FP_START/END and needs to be moved out
of the FPU compilation unit.

Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move dml2_validate to the non-FPU dml2_wrapper

[WHAT]
It calls DC_FP_START/END and shouldn't be living inside an
FPU compilation unit.

Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename dml2_wrapper.c to dml2_wrapper_fpu.c

[WHAT]
This function is an FPU compilation unit. Therefore it's not
allowed to call DC_FP_START/END functions. It currently does
so and we'll need to move those functions out. Therefore
rename the existing compilation unit so we can introduce a
non-FPU dml2_wrapper.c.

Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct comment style

[WHAT]
Comments should have /* and */ on their own lines.

Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop needless check for link->link_id.id

[WHY]
The switch/case in `link_detect_sink_signal_type` already detects the
link ID of `CONNECTOR_ID_HDMI_TYPE_A`.

[How]
Drop the extra match.

Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move CONNECTOR_ID_PCIE into switch/case

[WHY]
There is already a switch/case looking at link->link_id.id.

[How]
Move the case of `CONNECTOR_ID_PCIE` into switch case.

Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve readability of link_detect_sink_signal_type

[WHAT]
Move the break statements indentation in for the switch/case block.

Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write default Vesa Aux backlight control in dmub

[WHY]
Some OLED panels require driver to write Aux BL before link training or
turning on backlight; otherwise monitor brightness will change.

[HOW]
Write the default Vesa Aux backlight control in dmub.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor panel replay dc libs

[WHY]
Add dc interface to export link service libs for setting PR dmub command.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revise VSC SDP header for Panel Replay

[WAHT]
Add vsc sdp header setting for Panel Replay.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix sending redundant enable command to dmub

[WHY & HOW]
Fix sending repeating PR enable/disable command to dmub
which causing performance problem

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Parse debug flag to PR FW

[HOW & WHY]
Parse debug flag to PR FW.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add AS-SDP v2 support for eDP feature

[WHY & HOW]
VESA Panel Replay requires AS-SDP v2 support.
Need to add checking flow to enable AS-SDP v2 in this case.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor panel replay set dmub cmd flow

[WHY]
Add link service interface for setting PR dmub command

Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve HDMI info retrieval

[WHY & HOW]
Make a dedicated function to read HDMI-related monitor info, including
monitor's SCDC support.

Suggested-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add missing newline in DRM_DEBUG_DRIVER message

This error message was emitted without a newline during bring-up on
FreeBSD.  Presumably the error doesn't occur on Linux so was not noticed
before.

Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gmc v12_1_0 to discovery list

Include gmc v12_1_0 in the discovery list for
gmc IP blocks.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix PTE clearing during SVM unmap on GFX 12.1

During migration from VRAM to RAM, when PTE is cleared, reset
the PTE to always ensure that PTE.P=1 is set on GFX 12.1. If
PTE.P is not set, it can lead to TF faults.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable PDE.C usage on GFX 12.1

On GFX 12.1, PDE.C is ignored if (PDE|PTE)_REQUEST_PHYSICAL
is not setup in the GCVM control register. Always set this
field to enable PDE.C usage.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Always set snoop bit in PDE on GFX 12.1

GFX 12.1 has the requirement to always set snoop bit in PDE
to maintain coherency.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add per-ASIC PTE init flag

On GFX12.1, default PTE setup needs an additional bit to be
set. Add PTE initialization flags to handle setup default PTE
on a per-ASIC basis.
While at it, fixup the coding style too.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gmc v12_1 gmc callbacks

Implement gmc v12_1 gmc callbacks

v2: revert temporary PDE MTYPE to UC setting

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gmc v12_1 support

Add gmc support for gc version 12_1_0.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gfxhub v12_1 support

gfxhub v12_1 is a new generation ip

v2: squash in update to new IP headers
v3: squash in cast fix

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gc v12_1_0 ip headers v4

Add header files for gc v12_1_0 register offsets
and shift masks
v2: Update gc v12_1_0 ip headers
v3: Update gc v12_1_0 ip headers
v4, v5: Clean up registers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add osssys v7_1_0 ip headers v3

Add header files for osssys v7_1_0 register offsets
and shift masks
v2: Update osssys v7_1_0 ip headers to the latest version
v3: Clean up registers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add initial support for mmhub v4_2

Add initial support for mmhub v4_2_0.

v2: squash in cast fix

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix spelling in gmc9/10 code

onyl -> only

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ras: Move ras data alloc before bad page check

In the rare event if eeprom has only invalid address entries,
allocation is skipped, this causes following NULL pointer issue
[  547.103445] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  547.118897] #PF: supervisor read access in kernel mode
[  547.130292] #PF: error_code(0x0000) - not-present page
[  547.141689] PGD 124757067 P4D 0
[  547.148842] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  547.158504] CPU: 49 PID: 8167 Comm: cat Tainted: G           OE      6.8.0-38-generic #38-Ubuntu
[  547.177998] Hardware name: Supermicro AS -8126GS-TNMR/H14DSG-OD, BIOS 1.7 09/12/2025
[  547.195178] RIP: 0010:amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu]
[  547.210375] Code: e8 63 78 82 c0 45 31 d2 45 3b 75 08 48 8b 45 a0 73 44 44 89 f1 48 8b 7d 88 48 89 ca 48 c1 e2 05 48 29 ca 49 8b 4d 00 48 01 d1 <48> 83 79 10 00 74 17 49 63 f2 48 8b 49 08 41 83 c2 01 48 8d 34 76
[  547.252045] RSP: 0018:ffa0000067287ac0 EFLAGS: 00010246
[  547.263636] RAX: ff11000167c28130 RBX: ff11000127600000 RCX: 0000000000000000
[  547.279467] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ff11000125b1c800
[  547.295298] RBP: ffa0000067287b50 R08: 0000000000000000 R09: 0000000000000000
[  547.311129] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  547.326959] R13: ff11000217b1de00 R14: 0000000000000000 R15: 0000000000000092
[  547.342790] FS:  0000746e59d14740(0000) GS:ff11017dfda80000(0000) knlGS:0000000000000000
[  547.360744] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  547.373489] CR2: 0000000000000010 CR3: 000000019585e001 CR4: 0000000000f71ef0
[  547.389321] PKRU: 55555554
[  547.395316] Call Trace:
[  547.400737]  <TASK>
[  547.405386]  ? show_regs+0x6d/0x80
[  547.412929]  ? __die+0x24/0x80
[  547.419697]  ? page_fault_oops+0x99/0x1b0
[  547.428588]  ? do_user_addr_fault+0x2ee/0x6b0
[  547.438249]  ? exc_page_fault+0x83/0x1b0
[  547.446949]  ? asm_exc_page_fault+0x27/0x30
[  547.456225]  ? amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu]
[  547.470040]  ? mas_wr_modify+0xcd/0x140
[  547.478548]  sysfs_kf_bin_read+0x63/0xb0
[  547.487248]  kernfs_file_read_iter+0xa1/0x190
[  547.496909]  kernfs_fop_read_iter+0x25/0x40
[  547.506182]  vfs_read+0x255/0x390

This also result in space left assigned to negative values.
Moving data alloc call before bad page check resolves both the issue.

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Map/Unmap MMIO_REMAP as BAR register window; add TTM sg helpers; wire dma-buf

MMIO_REMAP (HDP flush page) exposes a hardware MMIO register window via
a PCI BAR; there are no struct pages backing it (not normal RAM).  But
when one device shares memory with another through dma-buf, the receiver
still expects a delivery route—a list of DMA-able chunks—called an
sg_table. For the BAR window, we can’t (no pages!), so we instead create
a one-entry list that points directly to the BAR’s physical bus address
and tell DMA: “use this I/O span.” - A single, contiguous byte range on
the PCI bus (start DMA address + length)). That’s why we map it with
dma_map_resource() and set sg_set_page(..., NULL, ...). Perform DMA
reads/writes directly to that range so we build an sg_table from a BAR
physical span and map it with dma_map_resource().

This patch centralizes the BAR-I/O mapping in TTM and wires dma-buf to
it:

Add amdgpu_ttm_mmio_remap_alloc_sgt() /
amdgpu_ttm_mmio_remap_free_sgt(). They walk the TTM resource via
amdgpu_res_cursor, add the byte offset to adev->rmmio_remap.bus_addr,
build a one-entry sg_table with sg_set_page(NULL, …), and map/unmap it
with dma_map_resource().

In dma-buf map/unmap, if the BO is in AMDGPU_PL_MMIO_REMAP, call the new
helpers.

Single place for BAR-I/O handling: amdgpu_ttm.c in
amdgpu_ttm_mmio_remap_alloc_sgt() and ..._free_sgt().
No struct pages: sg_set_page(sg, NULL, cur.size, 0); inside
amdgpu_ttm_mmio_remap_alloc_sgt().
Minimal sg_table: sg_alloc_table(*sgt, 1, GFP_KERNEL); inside
amdgpu_ttm_mmio_remap_alloc_sgt().
Hooked into dma-buf: amdgpu_dma_buf_map()/unmap() in amdgpu_dma_buf.c
call these helpers for AMDGPU_PL_MMIO_REMAP.

v2: squash in fix for set/get tiling

Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ttm: Pin 4K MMIO_REMAP Singleton BO at Init v2

MMIO_REMAP (HDP flush page) is a hardware I/O window exposed via a PCI
BAR.  It must not migrate or be evicted.

Allocate a single 4 KB GEM BO in AMDGPU_GEM_DOMAIN_MMIO_REMAP during TTM
initialization when the hardware exposes a remap bus address and the
host page size is <= 4 KiB. Reserve the BO and pin it at the TTM level
so it remains fixed for its lifetime. No CPU mapping is established
here.

On teardown, reserve, unpin, and free the BO if present.

This prepares the object to be shared (e.g., via dma-buf) without
triggering placement changes or no CPU-access migration

v2: Added extra NULL checks

Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: Compatible with legacy sriov host

If sriov host is legacy, the guest uniras will
be disabled.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: Add sriov ras preprocessing before gpu reset

Sriov host may clear all VF commands registered to auto
update list during VF reset, set ecc.auto_uUpdate block
to false before VF reset, and after VF reset is complete,
RAS_CMD__GET_ALL_BLOCK_ECC_STATUS command will be re-registered
to auto update list of sriov host.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add mmhub v4_2_0 ip headers v5

Add header files for mmhub v4_2_0 register offsets
and shift masks
v2: Update mmhub v4_2_0 ip headers
v3: Update mmhub v4_2_0 ip headers
v4: Clean up registers (Alex)
v5: Clean up registers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: Support high-frequency querying sriov ras block error count

Support high-frequency querying sriov ras block error count:
1. Create shared memory and fills it with RAS_CMD__GET_LAL_LOC_STATUS
   ras command.
2. The RAS_CMD_GET_ALL_BLOCK_ECC_STATUS command and shared
   memory are registered to sriov host ras auto-update list
   via RAS_CMD_SET_CMD_AUTO_UPDATE command.
3. Once sriov host detects ras error, it will automatically execute
   RAS_CMD__GET_ALL_BLOCK_ECC_STATUS command and write the result to
   shared memory.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: Add ras command to retrieve cper data from sriov host

In order to reduce the number of interactions with sriov
host and the amount of data exchanged, a set of ras commands
is first used to obtain the raw data used to generate cper
from the host, then, guest driver generates cper based
on the obtained raw data.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Enable system power caps for smu_v13_0_12

Enable system power caps to fetch system power and threshold for
smu_v13_0_12

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fetch ubb power for smu_v13_0_12

Feth ubb power from system metrics table for smu_v13_0_12

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: Support sriov uniras to obtain cper data

Support sriov uniras to obtain cper data.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/ras: sriov supports handling VF ras commands.

Add basic framework code to sriov to handle
VF ras commands.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add virt command to send VF ras command

Add virt command and interface to send VF ras command.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the calculation of RAS bad page number

__amdgpu_ras_restore_bad_pages is responsible for the maintenance of bad
page number, drop the unnecessary bad page number update in the error
handling path of add_bad_pages.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add sysfs node for ubb power

Add sysfs node to expose ubb power limit for smu_v13_0_12

v2: Update sysfs node name to baseboard_power & baseboard_power_limit to
make it consistent with other node names (Lijo)

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update pmfw headers for smu_v13_0_12

Update pmfw headers for smu_v13_0_12 to include ubb power

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add documentation about ring buffer

AMDGPU heavily relies on ring buffers to manage its components; as a
result, it has an elaborate mechanism of operation with multiple details
around it. This commit introduces new documentation on ring buffers,
detailing their management and expanding the explanation of Enforce
isolation. Finally, this commit also adds the documentation available in
the amdgpu_ring.c file to it.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add more information about GC

This commit introduces set of information that details the different
sets of schedulers available in the SE.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Expand generic block information

This commit expands the overall explanation about AMD GPU IPs by adding
more details about their interconnection. Note that this commit includes
a diagram that provides additional information.

v2: fix up TMR - Trusted Memory Region

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add new glossary entries from UMR

When using UMR, a dashboard is available that displays the CPC, CPF,
CPG, TCP, and UTCL utilization. This commit introduces the meanings of
those acronyms (and others) to the glossary to improve the comprehension
of the UMR dashboard.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Expand kernel-doc in amdgpu_ring

Expand the kernel-doc about amdgpu_ring and add some tiny improvements.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable IH CAM on IH 7.1.0

Enable IH CAM to handle retry faults on IH 7.1.0.
Also increase the soft ring size.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use ih v7_0 ip block for ih v7_1

ih v7_1 and ih v7_0 share the same ip block implementation

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set psp ip block and funcs for v15.0.8

Set psp ip block and funcs for MP0 15.0.8

Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Upload a single sdma fw copy when using psp v15.0.8

driver only need to upload sdma firmware copy for
all sdma instances when using PSP v15.0.8

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set skip_tmr to true for psp v15_0_8

psp v15_0_8 does not require tmr created by gpu driver

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add psp v15.0.8 ip block v3

Add psp_v15_0_8.c for MPASP 15.0.8

v2: drop memory training intf as they are only
necessary for GDDR memory

v3: Implement psp_v15_0_8_get_fw_type (Feifei)

Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add mp v15_0_8 ip headers v4

Add header files for mp v15_0_8 register offsets
and shift masks
v2: Update mp v15_0_8 ip headers
v3: Update mp v15_0_8 ip headers
v4: Clean up registers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update psp_get_fw_type() function

In psp 15.0.8, mes and sdma GFX_FW_TYPE have been changed.

Define a psp common function: psp_get_fw_type().
Hide the GFX_FW_TYPE Changes in each ip's psp->funcs_get_fw_type callback.
(like psp_v15_0_8_get_fw_type()).
If no GFX_FW_TYPE change, reuse the amdgpu_psp_get_fw_type().

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add rlcv firmware for frontdoor loading.

Rlcv is required to be loaded for frontdoor.

1. Add 2 rlcv ucode ids:
    AMDGPU_UCODE_RLC_IRAM_1 and AMDGPU_UCODE_RLC_DRAM_1

2. Add rlc_firmware_header_v2_5 for above 2 rlcv headers.

3. Add 2 types in psp_fw_gfx_if interface interacting with asp:
    GFX_FW_TYPE_RLX6_UCODE_CORE1 - RLCV IRAM
    GFX_FW_TYPE_RLX6_DRAM_BOOT_CORE1 - RLCV DRAM BOOT

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Initialize smuio functions for smuio v15_0_8

Add initialization for smuio funcs specific to v15.0.8

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add PRT, PTE, PDE to amdgpu glossary (v2)

PRT = Partially Resident Texture (aka. sparse residency)
PTE = Page Table Entry
PDE = Page Directory Entry

v2:
- Add PDE

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add smuio v15_0_8 support v4

v15_0_8 is a new generation smuio ip block
v2: Add smuio callbacks for interface id
v3: Add smuio callback to identify custom hbm
v4: comment out unused functions (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/uapi: Clarify comment on AMDGPU_VM_PAGE_PRT

In the context of the amdgpu uAPI, the PRT flag is referring only
to unmapped pages of a partially resident texture (aka. sparse
resource), but not the full resource.

Virtual addresses marked with this flag behave as follows:
- Reads return zero
- Writes are discarded

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add smuio v15_0_8 ip headers v4

Add header files for smuio v15_0_8 register offsets
and shift masks
v2: Update smuio v15_0_8 ip headers
v3: Update smuio v15_0_8 ip headers
v4: Clean up registers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove hard‑coded GC IP version checks from kfd_node_by_irq_ids

Replace the GC IP version hard-coded check with multi-aid check in
kfd_node_by_irq_ids(). If aid_mask is not set, we immediately return
dev->nodes[0] otherwise we iterate and match using kfd_irq_is_from_node().

Signed-off-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update vm start, end, hole to support 57bit address

Change gmc macro AMDGPU_GMC_HOLE_START/END/MASK to 57bit if vm root
level is PDB3 for 5-level page tables.

The macro access adev without passing adev as parameter is to minimize
the code change to support 57bit, then we have to add adev variable in
several places to use the macro.

Because adev definition is not available in all amdgpu c files which
include amdgpu_gmc.h, change inline function amdgpu_gmc_sign_extend to
macro.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: GPU vm support 5-level page table

If GPU supports 5-level page table, but CPU disable 5-level page table
by using boot option no5lvl or CPU feature not available, the virtual
address will be 48bit, not needed to enable 5-level page table on GPU
vm.

If adev->vm_manager.num_level, number of pde levels, set to 4, then
gfxhub and mmhub register VM_CONTEXTx_CNTL/PAGE_TABLE_DEPTH will set
to 4 to enable 5-level page table in page table walker.

Set vm_manager.root_level to AMDGPU_VM_PDE3, then update GPU mapping
will allocate and update PDE3/PDE2/PDE1/PDE0/PTB 5-level page tables.

If max_level is not 4, no change for the logic to support features
needed by old ASICs.

v2: squash in CONFIG fix

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add soc v1_0 enum header

Add soc v1_0 enum header

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update VRAM types

Update VRAM types.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move XCP_INST_MASK amdgpu_xcp.h

Move the common macro for xcp manger to amdgpu_xcp.h

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Verify dpm setting for enabling smu with direct fw loading

Ensure that amdgpu_dpm kernel module parameter is set to 1
when enabling smu with direct firmware loading

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: refactor rlc/gfx spm

for adding multiple xcc support.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Bing Ma <Bing.Ma@amd.com>
Reviewed-by: Gang Ba <gaba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Generalize HQD and VMID mask calculation for MES

Generalize the calculation for determining the HQD mask and VMID mask
passed to MES during initialization.

v2: rebase (Alex)

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: add multi-xcc support

a. extend mes pipe instances to num_xcc * max_mes_pipe
b. initialize mes schq/kiq pipes per xcc
c. submit mes packet to mes ring according to xcc_id

v2: rebase (Alex)

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add PCIe atomics bit in PTE

To enable atomic access to memory, setup the new PCIe atomics bit
in PTE.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update soc15 IH client ids

Add client id for UTCL2.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add hwid for AIGC

Add hwid for a new ip block named AIGC

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add hwid for ATU

Add hwid for Address Translation Unit (ATU)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Increase the maximum number of IP instances

SOC v1_0 supports a greater number of IP instances.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Rework reserved SDMA queue handling

We would need to reserve SDMA queues per KFD node.
As a result, rework the SDMA reserved queue handling to make it per
KFD node.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix NULL pointer issue for supports_baco

Return 0 if the realted ASIC do not have supports_baco
function to fix the NULL pointer issue.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix NULL pointer issue buffer funcs

If SDMA block not enabled, buffer_funcs will not initialize,
fix the null pointer issue if buffer_funcs not initialized.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'topic/drm-intel-plane-color-pipeline-2025-12-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

drm/i915 topic pull request for v6.19:

Features and functionality:
- Add plane color management support (Uma, Chaitanya)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/e7129c6afd6208719d2f5124da86e810505e7a7b@intel.com