Linus Torvalds [Mon, 4 Aug 2025 23:37:29 +0000 (16:37 -0700)]
Merge tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"A few more patches from I2C. Some are fixes which would be nice to
have in rc1 already, some patches have nearly been fallen through the
cracks, some just needed a bit more testing.
- acpi: enable 100kHz workaround for DLL0945
- apple: add support for Apple A7–A11, T2 chips; Kconfig update
- mux: mule: fix error handling path
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls"
* tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: mule: Fix an error handling path in mule_i2c_mux_probe()
i2c: Force DLL0945 touchpad i2c freq to 100khz
i2c: apple: Drop default ARCH_APPLE in Kconfig
i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates
dt-bindings: i2c: apple,i2c: Document Apple A7-A11, T2 compatibles
i2c: tegra: Remove dma_sync_*() calls
i2c: tegra: Use internal reset when reset property is not available
i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIs
Linus Torvalds [Mon, 4 Aug 2025 23:27:21 +0000 (16:27 -0700)]
Merge tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"Three main updates: folio conversion by Matthew, switch to a new mount
API by Hongbo and Eric, and several sysfs entries to tune GCs for ZUFS
with finer granularity by Daeho.
There are also patches to address bugs and issues in the existing
features such as GCs, file pinning, write-while-dio-read, contingous
block allocation, and memory access violations.
Enhancements:
- switch to new mount API and folio conversion
- add sysfs nodes to controle F2FS GCs for ZUFS
- improve performance on the nat entry cache
- drop inode from the donation list when the last file is closed
- avoid splitting bio when reading multiple pages
Bug fixes:
- fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
- make sure zoned device GC to use FG_GC in shortage of free section
- fix to calculate dirty data during has_not_enough_free_secs()
- fix to update upper_p in __get_secs_required() correctly
- wait for inflight dio completion, excluding pinned files read using dio
- don't break allocation when crossing contiguous sections
- vm_unmap_ram() may be called from an invalid context
- fix to avoid out-of-boundary access in dnode page
- fix to avoid panic in f2fs_evict_inode
- fix to avoid UAF in f2fs_sync_inode_meta()
- fix to use f2fs_is_valid_blkaddr_raw() in do_write_page()
- fix UAF of f2fs_inode_info in f2fs_free_dic
- fix to avoid invalid wait context issue
- fix bio memleak when committing super block
- handle nat.blkaddr corruption in f2fs_get_node_info()
In addition, there are also clean-ups and minor bug fixes"
* tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (109 commits)
f2fs: drop inode from the donation list when the last file is closed
f2fs: add gc_boost_gc_greedy sysfs node
f2fs: add gc_boost_gc_multiple sysfs node
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
f2fs: fix to calculate dirty data during has_not_enough_free_secs()
f2fs: fix to update upper_p in __get_secs_required() correctly
f2fs: directly add newly allocated pre-dirty nat entry to dirty set list
f2fs: avoid redundant clean nat entry move in lru list
f2fs: zone: wait for inflight dio completion, excluding pinned files read using dio
f2fs: ignore valid ratio when free section count is low
f2fs: don't break allocation when crossing contiguous sections
f2fs: remove unnecessary tracepoint enabled check
f2fs: merge the two conditions to avoid code duplication
f2fs: vm_unmap_ram() may be called from an invalid context
f2fs: fix to avoid out-of-boundary access in dnode page
f2fs: switch to the new mount api
f2fs: introduce fs_context_operation structure
f2fs: separate the options parsing and options checking
f2fs: Add f2fs_fs_context to record the mount options
f2fs: Allow sbi to be NULL in f2fs_printk
...
Linus Torvalds [Mon, 4 Aug 2025 17:54:36 +0000 (10:54 -0700)]
Merge tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
Linus Torvalds [Mon, 4 Aug 2025 15:58:53 +0000 (08:58 -0700)]
Merge tag 'for-6.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix checking for request-based stackable devices (dm-table)
- fix corrupt_bio_byte setup checks (dm-flakey)
- add support for resync w/o metadata devices (dm raid)
- small code simplification (dm, dm-mpath, vm-vdo, dm-raid)
- remove support for asynchronous hashes (dm-verity)
- close smatch warning (dm-zoned-target)
- update the documentation and enable inline-crypto passthrough
(dm-thin)
* tag 'for-6.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: set DM_TARGET_PASSES_CRYPTO feature for dm-thin
dm-thin: update the documentation
dm-raid: do not include dm-core.h
vdo: omit need_resched() before cond_resched()
md: dm-zoned-target: Initialize return variable r to avoid uninitialized use
dm-verity: remove support for asynchronous hashes
dm-mpath: don't print the "loaded" message if registering fails
dm-mpath: make dm_unregister_path_selector return void
dm: ima: avoid extra calls to strlen()
dm: Simplify dm_io_complete()
dm: Remove unnecessary return in dm_zone_endio()
dm raid: add support for resync w/o metadata devices
dm-flakey: Fix corrupt_bio_byte setup checks
dm-table: fix checking for rq stackable devices
Linus Torvalds [Mon, 4 Aug 2025 15:37:46 +0000 (08:37 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in headers (Thomas Huth)
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
openrisc: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
Linus Torvalds [Mon, 4 Aug 2025 15:17:28 +0000 (08:17 -0700)]
Merge tag 'apparmor-pr-2025-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This has one major feature, it pulls in a cleaned up version of
af_unix mediation that Ubuntu has been carrying for years. It is
placed behind a new abi to ensure that it does cause policy
regressions. With pulling in the af_unix mediation there have been
cleanups and some refactoring of network socket mediation. This
accounts for the majority of the changes in the diff.
In addition there are a few improvements providing minor code
optimizations. several code cleanups, and bug fixes.
Features:
- improve debug printing
- carry mediation check on label (optimization)
- improve ability for compiler to optimize
__begin_current_label_crit_section
- transition for a linked list of rulesets to a vector of rulesets
- don't hardcode profile signal, allow it to be set by policy
- ability to mediate caps via the state machine instead of lut
- Add Ubuntu af_unix mediation, put it behind new v9 abi
Cleanups:
- fix typos and spelling errors
- cleanup kernel doc and code inconsistencies
- remove redundant checks/code
- remove unused variables
- Use str_yes_no() helper function
- mark tables static where appropriate
- make all generated string array headers const char *const
- refactor to doc semantics of file_perm checks
- replace macro calls to network/socket fns with explicit calls
- refactor/cleanup socket mediation code preparing for finer grained
mediation of different network families
- several updates to kernel doc comments
Bug fixes:
- fix incorrect profile->signal range check
- idmap mount fixes
- policy unpack unaligned access fixes
- kfree_sensitive() where appropriate
- fix oops when freeing policy
- fix conflicting attachment resolution
- fix exec table look-ups when stacking isn't first
- fix exec auditing
- mitigate userspace generating overly large xtables"
* tag 'apparmor-pr-2025-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (60 commits)
apparmor: fix: oops when trying to free null ruleset
apparmor: fix Regression on linux-next (next-20250721)
apparmor: fix test error: WARNING in apparmor_unix_stream_connect
apparmor: Remove the unused variable rules
apparmor: fix: accept2 being specifie even when permission table is presnt
apparmor: transition from a list of rules to a vector of rules
apparmor: fix documentation mismatches in val_mask_to_str and socket functions
apparmor: remove redundant perms.allow MAY_EXEC bitflag set
apparmor: fix kernel doc warnings for kernel test robot
apparmor: Fix unaligned memory accesses in KUnit test
apparmor: Fix 8-byte alignment for initial dfa blob streams
apparmor: shift uid when mediating af_unix in userns
apparmor: shift ouid when mediating hard links in userns
apparmor: make sure unix socket labeling is correctly updated.
apparmor: fix regression in fs based unix sockets when using old abi
apparmor: fix AA_DEBUG_LABEL()
apparmor: fix af_unix auditing to include all address information
apparmor: Remove use of the double lock
apparmor: update kernel doc comments for xxx_label_crit_section
apparmor: make __begin_current_label_crit_section() indicate whether put is needed
...
John Johansen [Sat, 2 Aug 2025 03:36:06 +0000 (20:36 -0700)]
apparmor: fix: oops when trying to free null ruleset
profile allocation is wrongly setting the number of entries on the
rules vector before any ruleset is assigned. If profile allocation
fails between ruleset allocation and assigning the first ruleset,
free_ruleset() will be called with a null pointer resulting in an
oops.
Don't set the count until a ruleset is actually allocated and
guard against free_ruleset() being called with a null pointer.
Reported-by: Ryan Lee <ryan.lee@canonical.com> Fixes: 217af7e2f4de ("apparmor: refactor profile rules and attachments") Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Mon, 4 Aug 2025 03:17:34 +0000 (20:17 -0700)]
Merge tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
Linus Torvalds [Mon, 4 Aug 2025 02:15:04 +0000 (19:15 -0700)]
Merge tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
Linus Torvalds [Sun, 3 Aug 2025 23:23:09 +0000 (16:23 -0700)]
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Linus Torvalds [Sun, 3 Aug 2025 22:03:04 +0000 (15:03 -0700)]
Merge tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer
is already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard()
for these functions so that their use cases can be simplified and not
need to use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using
guard() and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6
argument registers and then use BTF to format them for human
consumption when the trace file is read. There are several arguments
that are "unsigned long" and even "unsigned int" that are either and
address or a mask. It is easier to understand if they were printed
using hexadecimal instead of decimal. The old method just printed all
non-pointer values as signed integers, which made it even worse for
unsigned integers.
* tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have unsigned int function args displayed as hexadecimal
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
tracing: Use __free(kfree) in trace.c to remove gotos
tracing: Add guard() around locks and mutexes in trace.c
tracing: Add guard(ring_buffer_nest)
tracing: Remove unneeded goto out logic
Linus Torvalds [Sun, 3 Aug 2025 21:16:52 +0000 (14:16 -0700)]
Merge tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
Linus Torvalds [Sun, 3 Aug 2025 20:49:10 +0000 (13:49 -0700)]
Merge tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
fangzhong.zhou [Sat, 2 Aug 2025 23:15:54 +0000 (07:15 +0800)]
i2c: Force DLL0945 touchpad i2c freq to 100khz
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Sven Peter [Thu, 12 Jun 2025 21:11:29 +0000 (21:11 +0000)]
i2c: apple: Drop default ARCH_APPLE in Kconfig
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Wolfram Sang [Sun, 3 Aug 2025 20:25:12 +0000 (22:25 +0200)]
Merge tag 'i2c-host-6.17-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
Brian Masney [Thu, 10 Jul 2025 15:20:35 +0000 (11:20 -0400)]
rtc: rv3032: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:34 +0000 (11:20 -0400)]
rtc: rv3028: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:33 +0000 (11:20 -0400)]
rtc: pcf8563: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:32 +0000 (11:20 -0400)]
rtc: pcf85063: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:31 +0000 (11:20 -0400)]
rtc: nct3018y: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:30 +0000 (11:20 -0400)]
rtc: max31335: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:29 +0000 (11:20 -0400)]
rtc: m41t80: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:28 +0000 (11:20 -0400)]
rtc: hym8563: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:27 +0000 (11:20 -0400)]
rtc: ds1307: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:20:26 +0000 (11:20 -0400)]
rtc: rv3028: fix incorrect maximum clock rate handling
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Brian Masney [Thu, 10 Jul 2025 15:20:25 +0000 (11:20 -0400)]
rtc: pcf8563: fix incorrect maximum clock rate handling
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Brian Masney [Thu, 10 Jul 2025 15:20:24 +0000 (11:20 -0400)]
rtc: pcf85063: fix incorrect maximum clock rate handling
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Brian Masney [Thu, 10 Jul 2025 15:20:23 +0000 (11:20 -0400)]
rtc: nct3018y: fix incorrect maximum clock rate handling
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Brian Masney [Thu, 10 Jul 2025 15:20:22 +0000 (11:20 -0400)]
rtc: hym8563: fix incorrect maximum clock rate handling
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Brian Masney [Thu, 10 Jul 2025 15:20:21 +0000 (11:20 -0400)]
rtc: ds1307: fix incorrect maximum clock rate handling
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fan Yu [Thu, 31 Jul 2025 14:53:26 +0000 (22:53 +0800)]
tools/getdelays: add backward compatibility for taskstats version
Add version checks to print_delayacct() to handle differences in struct
taskstats across kernel versions. Field availability depends on taskstats
version (t->version), corresponding to TASKSTATS_VERSION in kernel headers
(see include/uapi/linux/taskstats.h).
Version feature mapping:
- version >= 11 - supports COMPACT statistics
- version >= 13 - supports WPCOPY statistics
- version >= 14 - supports IRQ statistics
- version >= 16 - supports *_max and *_min delay statistics
This ensures the tool works correctly with both older and newer kernel
versions by conditionally printing fields based on the reported version.
eg.1
bash# grep -r "#define TASKSTATS_VERSION" /usr/include/linux/taskstats.h
"#define TASKSTATS_VERSION 10"
bash# ./getdelays -d -p 1
CPU count real total virtual total delay total delay average
7481 3786181709380709829136393725 0.005ms
IO count delay total delay average
369 1116046035 3.025ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
eg.2
bash# grep -r "#define TASKSTATS_VERSION" /usr/include/linux/taskstats.h
"#define TASKSTATS_VERSION 14"
bash# ./getdelays -d -p 1
CPU count real total virtual total delay total delay average
68862 16347479004617458472226719962496806 0.290ms
IO count delay total delay average
0 0 0.000ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
COMPACT count delay total delay average
0 0 0.000ms
WPCOPY count delay total delay average
0 0 0.000ms
IRQ count delay total delay average
0 0 0.000ms
Link: https://lkml.kernel.org/r/20250731225326549CttJ7g9NfjTlaqBwl015T@zte.com.cn Signed-off-by: Fan Yu <fan.yu9@zte.com.cn> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Wang Yaxin <wang.yaxin@zte.com.cn> Cc: xu xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Testing kexec handover requires a kernel driver that will generate some
data and preserve it with KHO on the first boot and then restore that data
and verify it was preserved properly after kexec.
To facilitate such test, along with the kernel driver responsible for data
generation, preservation and restoration add a script that runs a kernel
in a VM with a minimal /init. The /init enables KHO, loads a kernel image
for kexec and runs kexec reboot. After the boot of the kexeced kernel,
the driver verifies that the data was properly preserved.
Link: https://lkml.kernel.org/r/202507281628341752gMXCMN7S-Vz_LHYHum9r@zte.com.cn Signed-off-by: Fan Yu <fan.yu9@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Acked-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wang Yaxin [Mon, 21 Jul 2025 01:40:49 +0000 (09:40 +0800)]
MAINTAINERS: add maintainers for delaytop
The delaytop tool supports showing system delays and task-level delays,
effectively identifying the top-n tasks with high latency in the system,
which is highly beneficial for improving system performance. Wang Yaxin
and her colleague Fan Yu focus on locating system delay issues. To
promote the thriving development of delaytop, we hope to serve as
maintainers to continuously improve it, aiming to provide a more effective
solution for system latency issues in the future.
Link: https://lkml.kernel.org/r/20250721094049958ImB8XG_imntcPqpQn1KfG@zte.com.cn Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Fan Yu <fan.yu9@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
Use atomic_long_try_cmpxchg() instead of
atomic_long_cmpxchg (*ptr, old, new) == old in atomic_long_inc_below().
x86 CMPXCHG instruction returns success in ZF flag, so this change saves
a compare after cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_long_try_cmpxchg implicitly assigns old *ptr value to "old"
when cmpxchg fails, enabling further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20250721174610.28361-2-ubizjak@gmail.com Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: MengEn Sun <mengensun@tencent.com> Cc: "Thomas Weißschuh" <linux@weissschuh.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com Fixes: f9c82a4ea89c ("Increase size of ucounts to atomic_long_t") Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: MengEn Sun <mengensun@tencent.com> Cc: "Thomas Weißschuh" <linux@weissschuh.net> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Graf [Tue, 10 Jun 2025 08:53:27 +0000 (08:53 +0000)]
kexec: enable CMA based contiguous allocation
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com Signed-off-by: Alexander Graf <graf@amazon.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Zhongkun He <hezhongkun.hzk@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xxh32_digest() and xxh32_update() were added in 2017 in the original
xxhash commit, but have remained unused.
Remove them.
Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Dave Gilbert <linux@treblig.org> Cc: Nick Terrell <terrelln@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sat, 2 Aug 2025 16:58:11 +0000 (09:58 -0700)]
Merge tag 'fbdev-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"One potential buffer overflow fix in the framebuffer registration
function, some fixes for the imxfb, nvidiafb and simplefb drivers, and
a bunch of cleanups for fbcon, kyrofb and svgalib.
Driver fixes:
- imxfb: prevent null-ptr-deref [Chenyuan Yang]
- nvidiafb: fix build on 32-bit ARCH=um [Johannes Berg]
- nvidiafb: add depends on HAS_IOPORT [Randy Dunlap]
- simplefb: Use of_reserved_mem_region_to_resource() for "memory-region" [Rob Herring]
Cleanups:
- fbcon: various code cleanups wrt blinking [Ville Syrjälä]
- kyrofb: Convert to devm_*() functions [Giovanni Di Santi]
- svgalib: Coding style cleanups [Darshan R.]
- Fix typo in Kconfig text for FB_DEVICE [Daniel Palmer]"
* tag 'fbdev-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use 'bool' where appopriate
fbcon: Introduce get_{fg,bg}_color()
fbcon: fbcon_is_inactive() -> fbcon_is_active()
fbcon: fbcon_cursor_noblink -> fbcon_cursor_blink
fbdev: Fix typo in Kconfig text for FB_DEVICE
fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref
fbdev: svgalib: Clean up coding style
fbdev: kyro: Use devm_ioremap_wc() for screen mem
fbdev: kyro: Use devm_ioremap() for mmio registers
fbdev: kyro: Add missing PCI memory region request
fbdev: simplefb: Use of_reserved_mem_region_to_resource() for "memory-region"
fbdev: fix potential buffer overflow in do_register_framebuffer()
fbdev: nvidiafb: add depends on HAS_IOPORT
fbdev: nvidiafb: fix build on 32-bit ARCH=um
Linus Torvalds [Sat, 2 Aug 2025 16:52:53 +0000 (09:52 -0700)]
Merge tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This update replaces the remaining tasklet usage in the FireWire
subsystem with workqueue for asynchronous packet transmission. With
this change, tasklets are now fully eliminated from the subsystem.
Asynchronous packet transmission is used for serial bus topology
management as well as for the operation of the SBP-2 protocol driver
(firewire-sbp2). To ensure reliability during low-memory conditions,
the associated workqueue is created with the WQ_MEM_RECLAIM flag,
allowing it to participate in memory reclaim paths. Other attributes
are aligned with those used for isochronous packet handling, which was
migrated to workqueues in v6.12.
The workqueues are sleepable and support preemptible work items,
making them more suitable for real-time workloads that benefit from
timely task preemption at the system level.
There remains an issue where 'schedule()' may be called within an RCU
read-side critical section, due to a direct replacement of
'tasklet_disable_in_atomic()' with 'disable_work_sync()'. A proposed
fix for this has been posted[1], and is currently under review and
testing. It is expected to be sent upstream later"
Link: https://lore.kernel.org/lkml/20250728015125.17825-1-o-takashi@sakamocchi.jp/
* tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: reduce the size of common context structure by extracting members into AT structure
firewire: core: minor code refactoring to localize table of gap count
firewire: ohci: use workqueue to handle events of AT request/response contexts
firewire: ohci: use workqueue to handle events of AR request/response contexts
firewire: core: allocate workqueue for AR/AT request/response contexts
firewire: core: use from_work() macro to expand parent structure of work_struct
firewire: ohci: use from_work() macro to expand parent structure of work_struct
firewire: ohci: correct code comments about bus_reset tasklet
Linus Torvalds [Sat, 2 Aug 2025 00:13:26 +0000 (17:13 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay
Mohan, Mark Rutland, Maxwell Bland)
- Disallow tail calls between BPF programs that use different cgroup
local storage maps to prevent out-of-bounds access (Daniel Borkmann)
- Fix unaligned access in flow_dissector and netfilter BPF programs
(Paul Chaignon)
- Avoid possible use of uninitialized mod_len in libbpf (Achill
Gilgenast)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test for unaligned flow_dissector ctx access
bpf: Improve ctx access verifier error message
bpf: Check netfilter ctx accesses are aligned
bpf: Check flow_dissector ctx accesses are aligned
arm64/cfi,bpf: Support kCFI + BPF on arm64
cfi: Move BPF CFI types and helpers to generic code
cfi: add C CFI type macro
libbpf: Avoid possible use of uninitialized mod_len
bpf: Fix oob access in cgroup local storage
bpf: Move cgroup iterator helpers to bpf.h
bpf: Move bpf map owner out of common struct
bpf: Add cookie object to bpf maps
Linus Torvalds [Fri, 1 Aug 2025 23:55:47 +0000 (16:55 -0700)]
Merge tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build-ID processing goodies:
Build-IDs are content based hashes to link regions of memory to ELF
files in post processing. They have been available in distros for
quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable
backing storage at time they are being put in place and send it as
metadata at that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post
processes the samples to find binaries touched by any samples and
to save them with build-ID. It can skip reading build-ID in
userspace if it comes from the kernel.
perf record:
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat:
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace:
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash"
* tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
perf record: Cache build-ID of hit DSOs only
perf test: Ensure lock contention using pipe mode
perf python: Stop using deprecated PyUnicode_AsString()
perf list: Skip ABI PMUs when printing pmu values
perf list: Remove tracepoint printing code
perf tp_pmu: Add event APIs
perf tp_pmu: Factor existing tracepoint logic to new file
perf parse-events: Remove non-json software events
perf jevents: Add common software event json
perf tools: Remove libtraceevent in .gitignore
perf test: Fix comment ordering
perf sort: Use perf_env to set arch sort keys and header
perf test: Move PERF_SAMPLE_WEIGHT_STRUCT parsing to common test
perf sample: Remove arch notion of sample parsing
perf env: Remove global perf_env
perf trace: Avoid global perf_env with evsel__env
perf auxtrace: Pass perf_env from session through to mmap read
perf machine: Explicitly pass in host perf_env
perf bench synthesize: Avoid use of global perf_env
perf top: Make perf_env locally scoped
...
Linus Torvalds [Fri, 1 Aug 2025 23:15:53 +0000 (16:15 -0700)]
Merge tag 'parisc-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- The parisc kernel wrongly allows reading from read-protected
userspace memory without faulting, e.g. when userspace uses
mprotect() to read-protect a memory area and then uses a pointer to
this memory in a write(2, addr, 1) syscall.
To fix this issue, Dave Anglin developed a set of patches which use
the proberi assembler instruction to additionally check read access
permissions at runtime.
- Randy Dunlap contributed two patches to fix a minor typo and to
explain why a 32-bit compiler is needed although a 64-bit kernel is
built
* tag 'parisc-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Revise __get_user() to probe user read access
parisc: Revise gateway LWS calls to probe user read access
parisc: Drop WARN_ON_ONCE() from flush_cache_vmap
parisc: Try to fixup kernel exception in bad_area_nosemaphore path of do_page_fault()
parisc: Define and use set_pte_at()
parisc: Rename pte_needs_flush() to pte_needs_cache_flush() in cache.c
parisc: Check region is readable by user in raw_copy_from_user()
parisc: Update comments in make_insert_tlb
parisc: Makefile: explain that 64BIT requires both 32-bit and 64-bit compilers
parisc: Makefile: fix a typo in palo.conf
Steven Rostedt [Fri, 1 Aug 2025 20:56:01 +0000 (16:56 -0400)]
tracing: Have unsigned int function args displayed as hexadecimal
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Linus Torvalds [Fri, 1 Aug 2025 22:47:06 +0000 (15:47 -0700)]
Merge tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
Linus Torvalds [Fri, 1 Aug 2025 22:02:25 +0000 (15:02 -0700)]
Merge tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Make the Xilinx remoteproc driver support running on only a single
core, disable still unsupported remoteproc features, and stop the
remoteproc on shutdown to facilitate kexec.
- Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was
started many years ago.
* tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: xlnx: Fix kernel-doc warnings
remoteproc: xlnx: Disable unsupported features
remoteproc: xlnx: Add shutdown callback
remoteproc: xlnx: Allow single core use in split mode
dt-bindings: remoteproc: qcom,sa8775p-pas: Correct the interrupt number
remoteproc: Don't use %pK through printk
dt-bindings: remoteproc: qcom,sm8150-pas: Document QCS615 remoteproc
remoteproc: qcom: pas: Conclude the rename from adsp
Paul Chaignon [Fri, 1 Aug 2025 09:49:44 +0000 (11:49 +0200)]
selftests/bpf: Test for unaligned flow_dissector ctx access
This patch adds tests for two context fields where unaligned accesses
were not properly rejected.
Note the new macro is similar to the existing narrow_load macro, but we
need a different description and access offset. Combining the two
macros into one is probably doable but I don't think it would help
readability.
vmlinux.h is included in place of bpf.h so we have the definition of
struct bpf_nf_ctx.
Linus Torvalds [Fri, 1 Aug 2025 20:59:07 +0000 (13:59 -0700)]
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
Steven Rostedt [Fri, 1 Aug 2025 20:37:26 +0000 (16:37 -0400)]
tracing: Use __free(kfree) in trace.c to remove gotos
There's a couple of locations that have goto out in trace.c for the only
purpose of freeing a variable that was allocated. These can be replaced
with __free(kfree).
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.040892777@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Fri, 1 Aug 2025 20:37:24 +0000 (16:37 -0400)]
tracing: Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to by the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.710501021@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Fri, 1 Aug 2025 20:37:23 +0000 (16:37 -0400)]
tracing: Remove unneeded goto out logic
Several places in the trace.c file there's a goto out where the out is
simply a return. There's no reason to jump to the out label if it's not
doing any more logic but simply returning from the function.
Replace the goto outs with a return and remove the out labels.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.538726745@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Fri, 1 Aug 2025 19:35:12 +0000 (12:35 -0700)]
Merge tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Managed API for dma channel request
New support:
- Sophgo CV18XX/SG200X dmamux driver
- Qualcomm Milos GPI, sc8280xp GPI support
Updates:
- Conversion of brcm,iproc-sba and marvell,orion-xor binding
- Unused code cleanup across drivers"
* tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dt-bindings: dma: fsl-mxs-dma: allow interrupt-names for fsl,imx23-dma-apbx
dmaengine: xdmac: make it selectable for ARCH_MICROCHIP
dt-bindings: dma: Convert marvell,orion-xor to DT schema
dt-bindings: dma: Convert brcm,iproc-sba to DT schema
dmaengine: nbpfaxi: Add missing check after DMA map
dmaengine: mv_xor: Fix missing check after DMA map and missing unmap
dt-bindings: dma: qcom,gpi: document the Milos GPI DMA Engine
dmaengine: idxd: Remove __packed from structures
dmaengine: ti: Do not enable by default during compile testing
dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing
dmaengine: idxd: Fix warning for deadcode.deadstore
dmaengine: mmp: Fix again Wvoid-pointer-to-enum-cast warning
dmaengine: fsl-qdma: Add missing fsl_qdma_format kerneldoc
dmaengine: qcom: gpi: Drop unused gpi_write_reg_field()
dmaengine: fsl-dpaa2-qdma: Drop unused mc_enc()
dmaengine: dw-edma: Drop unused dchan2dev() and chan2dev()
dmaengine: stm32: Don't use %pK through printk
dmaengine: stm32-dma: configure next sg only if there are more than 2 sgs
dmaengine: sun4i: Simplify error handling in probe()
dt-bindings: dma: qcom,gpi: Document the sc8280xp GPI DMA engine
...
Linus Torvalds [Fri, 1 Aug 2025 19:26:24 +0000 (12:26 -0700)]
Merge tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
Linus Torvalds [Fri, 1 Aug 2025 17:29:36 +0000 (10:29 -0700)]
Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
Linus Torvalds [Fri, 1 Aug 2025 17:23:13 +0000 (10:23 -0700)]
Merge tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Introduce enum timerlat_tracing_mode
Now that BPF based sampling has been added to timerlat, add an enum
to represent which mode timerlat is running in
- Add action on timelat threshold feature
A new option, --on-threshold, is added, taking an argument that
further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process
- shell,command=<command>: Execute shell command
- Allow resuming tracing in timerlat bpf
rtla-timerlat BPF program uses a global variable stored in a .bss
section to store whether tracing has been stopped. Map it to allow it
to resume tracing after it has been stopped
- Add continue action to timerlat
Introduce option to resume tracing after a latency threshold
overflow. The option is implemented as an action named "continue"
- Add action on end feature to timerlat
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at
the end of the measurement
- Have rtla tests check output with grep
Add argument to the check command in the test suite that takes a
regular expression that the output of rtla command is checked
against. This allows testing for specific information in rtla output
in addition to checking the return value
- Add tests for timerlat actions
- Update the documentation for the new features
* tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/tests: Test timerlat -P option using actions
rtla/tests: Add grep checks for base test cases
Documentation/rtla: Add actions feature
rtla/tests: Limit duration to maximum of 10s
rtla/tests: Add tests for actions
rtla/tests: Check rtla output with grep
rtla/timerlat: Add action on end feature
rtla/timerlat: Add continue action
rtla/timerlat_bpf: Allow resuming tracing
rtla/timerlat: Add action on threshold feature
rtla/timerlat: Introduce enum timerlat_tracing_mode
Linus Torvalds [Fri, 1 Aug 2025 16:46:24 +0000 (09:46 -0700)]
Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull initial deferred unwind infrastructure from Steven Rostedt:
"This is the core infrastructure for the deferred unwinder that is
required for sframes[1]. Several other patch series are based on this
work although those patch series are not dependent on each other. In
order to simplify the development, having this core series upstream
will allow the other series to be worked on in parallel. The other
series are:
- The two patches to implement x86 support [2] [3]
- The s390 work [4]
- The perf work [5]
- The ftrace work [6]
- The sframe work [7]
And more is on the way.
The core infrastructure adds the following in kernel APIs:
- int unwind_user_faultable(struct unwind_stacktrace *trace);
Performs a user space stack trace that may fault user pages in.
- int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);
Allows a tracer to register with the unwind deferred
infrastructure.
- int unwind_deferred_request(struct unwind_work *work, u64 *cookie);
Used when a tracer request a deferred trace. Can be called from
interrupt or NMI context.
Paul Chaignon [Fri, 1 Aug 2025 09:49:15 +0000 (11:49 +0200)]
bpf: Improve ctx access verifier error message
We've already had two "error during ctx access conversion" warnings
triggered by syzkaller. Let's improve the error message by dumping the
cnt variable so that we can more easily differentiate between the
different error cases.
Paul Chaignon [Fri, 1 Aug 2025 09:48:15 +0000 (11:48 +0200)]
bpf: Check netfilter ctx accesses are aligned
Similarly to the previous patch fixing the flow_dissector ctx accesses,
nf_is_valid_access also doesn't check that ctx accesses are aligned.
Contrary to flow_dissector programs, netfilter programs don't have
context conversion. The unaligned ctx accesses are therefore allowed by
the verifier.
Paul Chaignon [Fri, 1 Aug 2025 09:47:23 +0000 (11:47 +0200)]
bpf: Check flow_dissector ctx accesses are aligned
flow_dissector_is_valid_access doesn't check that the context access is
aligned. As a consequence, an unaligned access within one of the exposed
field is considered valid and later rejected by
flow_dissector_convert_ctx_access when we try to convert it.
The later rejection is problematic because it's reported as a verifier
bug with a kernel warning and doesn't point to the right instruction in
verifier logs.
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Reported-by: syzbot+ccac90e482b2a81d74aa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccac90e482b2a81d74aa Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/cc1b036be484c99be45eddf48bd78cc6f72839b1.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Will Deacon [Thu, 17 Jul 2025 09:01:16 +0000 (10:01 +0100)]
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
When transmitting a vsock packet, virtio_transport_send_pkt_info() calls
virtio_transport_alloc_linear_skb() to allocate and fill SKBs with the
transmit data. Unfortunately, these are always linear allocations and
can therefore result in significant pressure on kmalloc() considering
that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE +
VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB
allocation for each packet.
Rework the vsock SKB allocation so that, for sizes with page order
greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated
instead with the packet header in the SKB and the transmit data in the
fragments. Note that this affects both the vhost and virtio transports.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-10-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:15 +0000 (10:01 +0100)]
vsock/virtio: Rename virtio_vsock_skb_rx_put()
In preparation for using virtio_vsock_skb_rx_put() when populating SKBs
on the vsock TX path, rename virtio_vsock_skb_rx_put() to
virtio_vsock_skb_put().
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-9-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:14 +0000 (10:01 +0100)]
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
When receiving a packet from a guest, vhost_vsock_handle_tx_kick()
calls vhost_vsock_alloc_linear_skb() to allocate and fill an SKB with
the receive data. Unfortunately, these are always linear allocations and
can therefore result in significant pressure on kmalloc() considering
that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE +
VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB
allocation for each packet.
Rework the vsock SKB allocation so that, for sizes with page order
greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated
instead with the packet header in the SKB and the receive data in the
fragments. Finally, add a debug warning if virtio_vsock_skb_rx_put() is
ever called on an SKB with a non-zero length, as this would be
destructive for the nonlinear case.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-8-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:13 +0000 (10:01 +0100)]
vsock/virtio: Move SKB allocation lower-bound check to callers
virtio_vsock_alloc_linear_skb() checks that the requested size is at
least big enough for the packet header (VIRTIO_VSOCK_SKB_HEADROOM).
Of the three callers of virtio_vsock_alloc_linear_skb(), only
vhost_vsock_alloc_skb() can potentially pass a packet smaller than the
header size and, as it already has a check against the maximum packet
size, extend its bounds checking to consider the minimum packet size
and remove the check from virtio_vsock_alloc_linear_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-7-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:12 +0000 (10:01 +0100)]
vsock/virtio: Rename virtio_vsock_alloc_skb()
In preparation for nonlinear allocations for large SKBs, rename
virtio_vsock_alloc_skb() to virtio_vsock_alloc_linear_skb() to indicate
that it returns linear SKBs unconditionally and switch all callers over
to this new interface for now.
No functional change.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-6-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:11 +0000 (10:01 +0100)]
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:10 +0000 (10:01 +0100)]
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
virtio_vsock_skb_rx_put() only calls skb_put() if the length in the
packet header is not zero even though skb_put() handles this case
gracefully.
Remove the functionally redundant check from virtio_vsock_skb_rx_put()
and, on the assumption that this is a worthwhile optimisation for
handling credit messages, augment the existing length checks in
virtio_transport_rx_work() to elide the call for zero-length payloads.
Since the callers all have the length, extend virtio_vsock_skb_rx_put()
to take it as an additional parameter rather than fish it back out of
the packet header.
Note that the vhost code already has similar logic in
vhost_vsock_alloc_skb().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-4-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Will Deacon [Thu, 17 Jul 2025 09:01:09 +0000 (10:01 +0100)]
vsock/virtio: Validate length in packet header before skb_put()
When receiving a vsock packet in the guest, only the virtqueue buffer
size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately,
virtio_vsock_skb_rx_put() uses the length from the packet header as the
length argument to skb_put(), potentially resulting in SKB overflow if
the host has gone wonky.
Validate the length as advertised by the packet header before calling
virtio_vsock_skb_rx_put().
Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-3-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
vhost_vsock_alloc_skb() returns NULL for packets advertising a length
larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE in the packet header. However,
this is only checked once the SKB has been allocated and, if the length
in the packet header is zero, the SKB may not be freed immediately.
Hoist the size check before the SKB allocation so that an iovec larger
than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + the header size is rejected
outright. The subsequent check on the length field in the header can
then simply check that the allocated SKB is indeed large enough to hold
the packet.
Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-2-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Mon, 14 Jul 2025 08:47:55 +0000 (16:47 +0800)]
vhost_net: basic in_order support
This patch introduces basic in-order support for vhost-net. By
recording the number of batched buffers in an array when calling
`vhost_add_used_and_signal_n()`, we can reduce the number of userspace
accesses. Note that the vhost-net batching logic is kept as we still
count the number of buffers there.
Testing Results:
With testpmd:
- TX: txonly mode + vhost_net with XDP_DROP on TAP shows a 17.5%
improvement, from 4.75 Mpps to 5.35 Mpps.
- RX: No obvious improvements were observed.
With virtio-ring in-order experimental code in the guest:
- TX: pktgen in the guest + XDP_DROP on TAP shows a 19% improvement,
from 5.2 Mpps to 6.2 Mpps.
- RX: pktgen on TAP with vhost_net + XDP_DROP in the guest achieves a
6.1% improvement, from 3.47 Mpps to 3.61 Mpps.
Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-4-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
Jason Wang [Mon, 14 Jul 2025 08:47:54 +0000 (16:47 +0800)]
vhost: basic in order support
This patch adds basic in order support for vhost. Two optimizations
are implemented in this patch:
1) Since driver uses descriptor in order, vhost can deduce the next
avail ring head by counting the number of descriptors that has been
used in next_avail_head. This eliminate the need to access the
available ring in vhost.
2) vhost_add_used_and_singal_n() is extended to accept the number of
batched buffers per used elem. While this increases the times of
userspace memory access but it helps to reduce the chance of
used ring access of both the driver and vhost.
Vhost-net will be the first user for this.
Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
Jason Wang [Mon, 14 Jul 2025 08:47:53 +0000 (16:47 +0800)]
vhost: fail early when __vhost_add_used() fails
This patch fails vhost_add_used_n() early when __vhost_add_used()
fails to make sure used idx is not updated with stale used ring
information.
Reported-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
Cindy Lu [Mon, 14 Jul 2025 07:12:32 +0000 (15:12 +0800)]
vhost: Reintroduce kthread API and add mode selection
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
the vhost uses vhost_task and operates as a child of the
owner thread. This is required for correct CPU usage accounting,
especially when using containers.
However, this change has caused confusion for some legacy
userspace applications, and we didn't notice until it's too late.
Unfortunately, it's too late to revert - we now have userspace
depending both on old and new behaviour :(
To address the issue, reintroduce kthread mode for vhost workers and
provide a configuration to select between kthread and task worker.
- Add 'fork_owner' parameter to vhost_dev to let users select kthread
or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK).
- Reintroduce kthread mode support:
* Bring back the original vhost_worker() implementation,
and renamed to vhost_run_work_kthread_list().
* Add cgroup support for the kthread
* Introduce struct vhost_worker_ops:
- Encapsulates create / stop / wake‑up callbacks.
- vhost_worker_create() selects the proper ops according to
inherit_owner.
- Userspace configuration interface:
* New IOCTLs:
- VHOST_SET_FORK_FROM_OWNER lets userspace select task mode
(VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD)
- VHOST_GET_FORK_FROM_OWNER reads the current worker mode
* Expose module parameter 'fork_from_owner_default' to allow system
administrators to configure the default mode for vhost workers
* Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether
these IOCTLs and the parameter are available
- The VHOST_NEW_WORKER functionality requires fork_owner to be set
to true, with validation added to ensure proper configuration
This partially reverts or improves upon:
commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray")
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"), Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20250714071333.59794-2-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
Anders Roxell [Fri, 4 Jul 2025 12:53:35 +0000 (14:53 +0200)]
vdpa: Fix IDR memory leak in VDUSE module exit
Add missing idr_destroy() call in vduse_exit() to properly free the
vduse_idr radix tree nodes. Without this, module load/unload cycles leak
576-byte radix tree node allocations, detectable by kmemleak as:
The vduse_idr is initialized via DEFINE_IDR() at line 136 and used throughout
the VDUSE (vDPA Device in Userspace) driver for device ID management. The fix
follows the documented pattern in lib/idr.c and matches the cleanup approach
used by other drivers.
This leak was discovered through comprehensive module testing with cumulative
kmemleak detection across 10 load/unload iterations per module.
Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Message-Id: <20250704125335.1084649-1-anders.roxell@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vdpa/mlx5: Fix release of uninitialized resources on error path
The commit in the fixes tag made sure that mlx5_vdpa_free()
is the single entrypoint for removing the vdpa device resources
added in mlx5_vdpa_dev_add(), even in the cleanup path of
mlx5_vdpa_dev_add().
This means that all functions from mlx5_vdpa_free() should be able to
handle uninitialized resources. This was not the case though:
mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx()
were not able to do so. This caused the splat below when adding
a vdpa device without a MAC address.
This patch fixes these remaining issues:
- Makes mlx5_vdpa_destroy_mr_resources() return early if called on
uninitialized resources.
- Moves mlx5_cmd_init_async_ctx() early on during device addition
because it can't fail. This means that mlx5_cmd_cleanup_async_ctx()
also can't fail. To mirror this, move the call site of
mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free().
An additional comment was added in mlx5_vdpa_free() to document
the expectations of functions called from this context.
projects / thirdparty / kernel / linux.git / log
