Petr Štetiar [Fri, 9 Nov 2018 11:09:29 +0000 (12:09 +0100)]
Revert "iptables: fix dependency for libip6tc on IPV6"
This patch reverts commit 2dc1f54b1205094e7c6036cae6275d2c326bad3e as it
breaks the build for me on x86-64 if I've IPV6 support disabled. Same config
builds fine on `openwrt-18.06` branch at 55d078b2.
$ grep IPV6 .config
# CONFIG_KERNEL_IPV6 is not set
# CONFIG_IPV6 is not set
Build errors out on:
Package libiptc is missing dependencies for the following libraries:
libip6tc.so.0
Looking at iptables-1.6.2/libiptc/Makefile.am:
libiptc_la_LIBADD = libip4tc.la libip6tc.la
and to iptables-1.6.2/libiptc/libiptc.pc.in:
Requires: libip4tc libip6tc
It seems that libiptc needs v4/v6 libs, so v6 isn't optional.
Cc: Rosy Song <rosysong@rosinson.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
Hans Dedecker [Sat, 10 Nov 2018 12:40:45 +0000 (13:40 +0100)]
ethtool: update to 4.19
8a1ad80 Release version 4.19. ecdf295 ethtool: Fix uninitialized variable use at qsfp dump 98c148e ethtool: better syntax for combinations of FEC modes d4b9f3f ethtool: support combinations of FEC modes
Rafał Miłecki [Fri, 9 Nov 2018 13:57:45 +0000 (14:57 +0100)]
kernel: deprecate support for the generic "linux,part-probe" DT binding
It has been rejected upstream and instead a nice/more generic solution
has been implemented. It's possible now to describe partitions format
using "compatible" DT string.
No OpenWrt target uses "linux,part-probe" anymore, leave it only in case
some forks need it. It will be dropped with support for new kernels.
as indicated in commit c5bf408ed6bd "(ramips: fix image generation for mt76x8")
more rework was needed to fix the other issues.
Building on another machine, but using the same arch, showed
the application failing again for different reasons.
Fix this by completely rewriting the application, fixing following found issues:
- buffer overflows, resulting in stack corruption
- flaws in memory requirement calculations (too small, too large)
- memory leaks
- missing bounds checking on string handling
- non-reproducable images, by using unitilized memory in checksum calculation
- missing error handling, resulting in succes on specific image errors
- endianness errors when building on BE machines
- various minor build warnings
- documentation did not match the code actions (header item locations)
- allowing input to be decimal, hex or octal now
Hans Dedecker [Mon, 5 Nov 2018 14:32:48 +0000 (15:32 +0100)]
iproute2: update to 4.19.0
Update to the latest version of iproute2; see https://lwn.net/Articles/769354/
for a full overview of the changes in 4.19.
Remove 190-add-cake-to-tc patch as CAKE qdisc is now supported in 4.19.0
Felix Fietkau [Tue, 6 Nov 2018 21:25:06 +0000 (22:25 +0100)]
mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields 2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware 1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap 097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration d0eb03e mt76x2u: init: remove not useful configuration c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module 57b441d mt76x0: phy: introduce tssi calibration support a78802c mt76x0: phy: use tssi reported value to configure tx power if available 94ad030 mt76: remove mcu_msg_alloc 15cb426 mt76: remove wait argument from mt76x02_mcu_function_select cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state 9b97e0f mt76x02: run calibration after scanning 663b197 mt76x02: assure we update gain after scan eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211 5195257 mt7603: fix maximum rx frame size 01815e9 mt7603: use mutex from struct mt76_dev 3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev 8b7f50d mt76: add size check for additional rx fragments 87bad3a mt7603: stop MAC on watchdog reset c34baab mt7603: add missing unlock in case changing the channel fails ac6fc78 mt7603: add debugfs file to trigger watchdog resets d9b5324 mt7603: add SPDX license identifiers 498d716 mt7603: fix checkpatch issues a1afefd mt7603: fix handling of fixed rate packets 5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets
Debugging using valgrind shows stack corruption due to a buffer overflow.
The author of the generator assumes the filename ends with "root",
while it should be "rootfs".
Fix this by accounting for the 2 missing characters which solves the build issues.
More work is required to cleanup this source, which will be done later on.
Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
As indicated on mailinglist discussion, the cause seems to be
the usage of very old SDMA firmware which is present in the soc:
[ 0.624302] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 0.624318] imx-sdma 20ec000.sdma: Falling back to user helper
[ 64.531607] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
This patch adds the new firmware binary. (2196 bytes)
It is required to embed the binary into the kernel image, as it
gets loaded very early in the boot process where the rootfs is not
available yet:
Koen Vandeputte [Mon, 5 Nov 2018 10:31:12 +0000 (11:31 +0100)]
ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.
This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.
A second issue also got fixed, which was also seen AP/STA mode:
When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.
This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.
Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.
Test setup:
- 2x identical devices: RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's -70 / -71
- Real distance: 23910 meter
Results (60s iperf runs):
Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec
Koen Vandeputte [Mon, 5 Nov 2018 11:53:55 +0000 (12:53 +0100)]
ar71xx: disable some tiny targets with kernel 4.14
The bump to kernel 4.14 caused a massive increase in kernel size.
For most targets, switching them to dynamic partitioning allowed
to cope with this.
On some targets, the kernel partition is located behind the rootfs,
which disallows switching to dynamic partitioning as the boot location
would be altered, requiring a u-boot change.
Also within the tiny section, which disables kernel symbols etc
to decrease the image size, the partition size is still too small.
Disable these targets for now, fixing image generation:
David Bauer [Sun, 4 Nov 2018 15:01:39 +0000 (16:01 +0100)]
ipq40xx: fix NBG6617 LED mapping
The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.
This patch replaces the custom autoload quirk of the
RT-AC58U with a bootargs-append overwrite.
The vendor's u-boot doesn't leave the bootargs / cmdline alone,
so the it can't be overwritten in any other way right now...
And of course, this will be a lot of fun to deal with once
the device switches to the new spi-nand subsystem.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Hauke Mehrtens [Thu, 1 Nov 2018 13:05:59 +0000 (14:05 +0100)]
scripts: update config.guess and config.sub
This updates these two files to commit 2fa97a8a0ed3 ("config.guess
(amd64:CYGWIN*:*:*, x86_64:CYGWIN*:*:*): Set master") which is the
current master of
https://git.savannah.gnu.org/gitweb/?p=config.git;a=summary
This contains updates for multiple architectures and will unbreak the
build on the x32 ABI.
openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep
Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some
situations it may happen that libunbound and openssl are only pulled in as
build dependencies, but are not enabled in .config.
In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are
ignored (as the whole symbol depends on PACKAGE_libopenssl), and config
symbol dependencies of libunbound aren't effective either (as libunbound
is not actually enabled).
This commit works around the issue by introducing a hidden negated symbol
OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is
disabled, and ensures that OpenSSL is built with deprecated APIs in this
case. A user can still manage to break the build by explicitly enabling
libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between
build dependencies and config symbols will require further discussion.
Radek Dostál [Mon, 22 Oct 2018 20:34:17 +0000 (22:34 +0200)]
ar71xx: switch TP-Link RE450 v1 to dynamic partitioning
As mentioned in commit 5f24933 recent changes on ar71xx (switch to 4.14,
memory compaction, ...) cause an increase in kernel size, making it too
big for RE450.
RE450 images were not build due to the following error message:
os-image partition too big (more than 1572864 bytes): Success
Tested on RE450, device boots and was used to send this patch.
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Radek Dostál <rd@radekdostal.com>
[rewrote commit msg keeping it tight + fixed SoB lines] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
YuheiOKAWA [Thu, 4 Oct 2018 16:08:51 +0000 (01:08 +0900)]
ath79: add support for PQI Air Pen
SoC: AR9330 (or AR9331 revision?)
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.
Flash 8MiB. (factory is dual image)
1. write image is use half 4MiB size from factory.
write initramfs image to mtd6 and mtd7.
2. change next boot setting. next is mtd6 boot.
echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0
3. rewrite sysupgrade image.
change next boot setting. next is mtd4.
echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0
ath79: Add support for Ubiquiti LiteAP ac (LAP-120)
This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor
5 GHz AC access point with an integrated 120° 16 dBi antenna. The device
was previously known as LiteBeam AP ac but was later rebranded.
The integrated QCA899X is a Ubiquiti branded part with modified vendor
and product id (0777:11ac9). It is very similar to the NanoStation loco
AC, except for the 2.4 GHz management radio (missing here).
Installation procedure is the same as the NanoStation [loco] AC:
1. Connect to serial header on device
2. Power on device and enter uboot console
3. Set up tftp server serving an openwrt initramfs build
4. Load initramfs build using the command tftpboot in the uboot cli
5. Boot the loaded image using the command bootm
6. Copy squashfs openwrt sysupgrade build to the booted device
7. Use mtd to write sysupgrade to partition "firmware"
8. Reboot and enjoy
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Daniel Engberg [Wed, 10 Oct 2018 11:04:31 +0000 (13:04 +0200)]
mt76: Fix dependencies for PCI support
USB support doesn't necessarily mean that there's
PCI support available so move that to the drivers
which requires PCI support. This applies to the
sunxi platform for instance.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
Felix Fietkau [Thu, 25 Oct 2018 20:48:49 +0000 (22:48 +0200)]
mt76: update to the latest version
0b8b15f mt7603: use common mmio mcu struct d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx 9d59d2a mt76: add support for reporting tx status with skb ed17ba2 mt7603: use common tx status handling code 14b6c59 mt76x0: use band parameter for LC calibration
Upgrade 88W8997 firmware to 8.4.0.52.
Removed unnecessary firmware settings.
Added vendor events.
Fixed crash problem when module is removed.
Modified the code to protect tx queues.
Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com>
[tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Hans Dedecker [Tue, 23 Oct 2018 13:55:09 +0000 (15:55 +0200)]
glibc: update to latest 2.27 commit (BZ #23562, BZ #23275)
77b4b8231e signal: Use correct type for si_band in siginfo_t [BZ #23562] 5bdb6897fc Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275]
Robert Marko [Fri, 19 Oct 2018 07:54:32 +0000 (09:54 +0200)]
linux-firmware: Update linux-firmware to 2018-10-18
Kalles ath10k PR was finally merged so update linux-firmware to
include those changes.
This is needed since disabling ath10k-firmware a lot of custom BDF-s
in board-2.bin-s are not available in previously outdated linux-firmware
board-2.bin-s.
This also includes support for boards currently using ipq-wifi and other
WIP ones.
- comment on BSP u-boot behaviour in regards to
what it edits and look for
- annotate irq lines with the help of interrupt-names
- remove deprecated "device_type" properties
The pci and network device_type had to stay since
they are required by the drivers and u-boot.
the cpu and memory device_types will remain as well
as they are still part of the DT Spec.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
With the upcoming 4.19 release, the serial console on the
Netgear WNDR4700 would no longer work as it is never really
set and always relied on the kernel's serial code not to
change the baud rate.
On the stock firmware, Netgear forced the console setting
through a custom CONFIG_CMDLINE in their kernel to 115200.
Normally, they should have done it in a different way and
just passed the baudrate through a "console=..." kernel
parameter via the bootargs in the "/chosen" dt node.
But in their default u-boot bootcmd setting, they somehow
forgot to add the "run addtty", so there's no easy way to
pass the baudrate from u-boot to the kernel. So it has
to be forced as otherwise it ends up as 9600 baud.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
projects / thirdparty / openwrt.git / log
