Dave Airlie [Thu, 24 Feb 2022 06:59:17 +0000 (16:59 +1000)]
Merge tag 'drm-intel-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Linux core:
-----------
iosys-map: Add offset to iosys_map_memcpy_to() (Lucas)
iosys-map: Add a few more helpers (Lucas)
i915 (display and core changes on drm-intel-next):
--------------------------------------------------
- Display's DBuf and watermark related fixes and improvements (Ville)
- More i915 header and other code clean-up (Jani)
- Display IPS fixes and improvements (Ville)
- OPRegion fixes and cleanups (Jani)
- Fix the plane end Y offset check for FBC (Ville)
- DP 128b/132b updates (Jani)
- Disable runtime pm wakeref tracking for the mock device selftest (Ville)
- Many display code clean-up while targeting to fix up DP DFP 4:2:0 handling (Ville)
- Bigjoiner state tracking and more bigjoiner related work (Ville)
- Update DMC_DEBUG3 register for DG1 (Chuansheng)
- SAGV fixes (Ville)
- More GT register cleanup (Matt)
- Fix build issue when using clang (Tong)
- Display DG2 fixes (Matt)
- ADL-P PHY related fixes (Imre)
- PSR2 fixes (Jose)
- Add PCH Support for Alder Lake N (Tejas)
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
Rodrigo Vivi [Wed, 23 Feb 2022 19:19:43 +0000 (14:19 -0500)]
Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
Ville Syrjälä [Thu, 17 Feb 2022 10:32:21 +0000 (12:32 +0200)]
drm/i915: Properly clear crtc state when disabling it fully, again
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit fff13e63a141 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit 19f65a3dbf75 ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Ville Syrjälä [Thu, 17 Feb 2022 10:32:20 +0000 (12:32 +0200)]
drm/i915: Remove odd any_ms=true assignment
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Ville Syrjälä [Thu, 17 Feb 2022 10:32:19 +0000 (12:32 +0200)]
drm/i915: Dump hw.enable and pipe_mode
Include hw.enable and pipe_mode in the crtc debugfs state dump.
These are fairly fundemental to the operation of the driver
so not seeing them leaves us in the dark.
Manasi Navare [Tue, 15 Feb 2022 20:26:01 +0000 (12:26 -0800)]
drm/i915/display/vrr: Reset VRR capable property on a long hpd
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Add display workaround # 1309179469 , which fixes a PHY hang when
switching from TBT mode to DP-alt/legacy mode. The workaround also
requires an IFWI/PHY firmware change, before that this change has no
effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared).
Jani Nikula [Thu, 17 Feb 2022 22:40:20 +0000 (00:40 +0200)]
drm/i915/dsi: disassociate VBT video transfer mode from register values
The VBT DSI video transfer mode field values have been defined in terms
of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that
to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though
the shift is different.
Make a clean break and disassociate the values from each other. Assume
the values can be different, and translate the VBT value to VLV and ICL
register values as needed. Use the existing macros from intel_bios.h.
This will be useful in splitting the DSI register macros to files by DSI
implementation.
Lucas De Marchi [Wed, 16 Feb 2022 17:41:33 +0000 (09:41 -0800)]
iosys-map: Add a few more helpers
First the simplest ones:
- iosys_map_memset(): when abstracting system and I/O memory,
just like the memcpy() use case, memset() also has dedicated
functions to be called for using IO memory.
- iosys_map_memcpy_from(): we may need to copy data from I/O
memory, not only to.
In certain situations it's useful to be able to read or write to an
offset that is calculated by having the memory layout given by a struct
declaration. Usually we are going to read/write a u8, u16, u32 or u64.
As a pre-requisite for the implementation, add iosys_map_memcpy_from()
to be the equivalent of iosys_map_memcpy_to(), but in the other
direction. Then add 2 pairs of macros:
The first pair takes the C-type and offset to read/write. The second
pair uses a struct describing the layout of the mapping in order to
calculate the offset and size being read/written.
We could use readb, readw, readl, readq and the write* counterparts,
however due to alignment issues this may not work on all architectures.
If alignment needs to be checked to call the right function, it's not
possible to decide at compile-time which function to call: so just leave
the decision to the memcpy function that will do exactly that.
Finally, in order to use the above macros with a map derived from
another, add another initializer: IOSYS_MAP_INIT_OFFSET().
v2:
- Rework IOSYS_MAP_INIT_OFFSET() so it doesn't rely on aliasing rules
within the union
- Add offset to both iosys_map_rd_field() and iosys_map_wr_field() to
allow the struct itself to be at an offset from the mapping
- Add documentation to iosys_map_rd_field() with example and expected
memory layout
v3:
- Drop kernel.h include as it's not needed anymore
Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-3-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:32 +0000 (09:41 -0800)]
iosys-map: Add offset to iosys_map_memcpy_to()
In certain situations it's useful to be able to write to an
offset of the mapping. Add a dst_offset to iosys_map_memcpy_to().
Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-2-lucas.demarchi@intel.com
Matt Roper [Fri, 18 Feb 2022 01:03:28 +0000 (17:03 -0800)]
drm/i915/dg2: Enable 5th port
DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output. This behaves similarly to the TC1
on past platforms with just a couple minor differences:
* DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
ICP/TGP/ADP.
* DG2 doesn't need the hpd inversion setting that we had to use on DG1
v2:
intel_ddi_init(dev_priv, PORT_TC1); [Matt]
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
Matt Roper [Fri, 18 Feb 2022 01:03:27 +0000 (17:03 -0800)]
drm/i915/dg2: Drop 38.4 MHz MPLLB tables
Our early understanding of DG2 was incorrect; since the 5th display
isn't actually a Type-C output, 38.4 MHz input clocks are never used on
this platform and we can drop the corresponding MPLLB tables.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-2-lucas.demarchi@intel.com
Jouni Högander [Fri, 18 Feb 2022 01:03:26 +0000 (17:03 -0800)]
drm/i915: Fix for PHY_MISC_TC1 offset
Currently ICL_PHY_MISC macro is returning offset 0x64C10 for PHY_E.
The PORT_TC1 port is not yet enabled properly in the driver, but
intel_phy_snps.c is relying on intel_phy_is_snps() to filter out
unavailable phys. That function was already considering the last phy as
available. Just correct the offset of the last phy to 0x64C14 as the
rest of the support for it is coming on next commits.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-1-lucas.demarchi@intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:35 +0000 (08:40 +0200)]
drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
If the only thing that is changing is SAGV vs. no SAGV but
the number of active planes and the total data rates end up
unchanged we currently bail out of intel_bw_atomic_check()
early and forget to actually compute the new WGV point
mask and thus won't actually enable/disable SAGV as requested.
This ends up poorly if we end up running with SAGV enabled
when we shouldn't. Usually ends up in underruns.
To fix this let's go through the QGV point mask computation
if either the data rates/number of planes, or the state
of SAGV is changing.
v2: Check more carefully if things are changing to avoid
the extra calculations/debugs from introducing unwanted
overhead
Ville Syrjälä [Fri, 18 Feb 2022 06:40:34 +0000 (08:40 +0200)]
drm/i915: Correctly populate use_sagv_wm for all pipes
When changing between SAGV vs. no SAGV on tgl+ we have to
update the use_sagv_wm flag for all the crtcs or else
an active pipe not already in the state will end up using
the wrong watermarks. That is especially bad when we end up
with the tighter non-SAGV watermarks with SAGV enabled.
Usually ends up in underruns.
Ville Syrjälä [Wed, 2 Feb 2022 11:16:16 +0000 (13:16 +0200)]
drm/i915: Drop pointless i830 PIPECONF read
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Ville Syrjälä [Wed, 2 Feb 2022 11:16:15 +0000 (13:16 +0200)]
drm/i915: Make the CHV CGM CSC register writes lockless
The CHV CGM CSC registers are single buffered and so we
may have to write them from the vblank worker, which
imposes very tight dealines. Drop the pointless locking
for the register accessess to reduce the overhead.
All the other registers we bash from the vblank worker
(LUTs) were already made lockless earlier.
Ville Syrjälä [Wed, 2 Feb 2022 11:16:14 +0000 (13:16 +0200)]
drm/i915: Make the pipe/output CSC register writes lockless
The pipe/output CSC register writes don't need to be locked
since all the registers are suitably isolated to their own
cachelines. So eliminate the locks to reduce the overhead
during the vblank evade critical section.
Ville Syrjälä [Wed, 2 Feb 2022 11:16:13 +0000 (13:16 +0200)]
drm/i915: Move PIPE_CHICKEN RMW out from the vblank evade critical section
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
drm/i915/display: Group PSR2 prog sequences and workarounds
Grouping inside of the same if all the programing sequences and
workarounds of PSR2.
The order of programing changed in intel_psr_enable_source() but
it will not affect PSR2 as at this point PSR2_ENABLE is still disabled.
drm/i915/display/tgl+: Implement new PLL programming step
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
Imre Deak [Thu, 17 Feb 2022 15:22:37 +0000 (17:22 +0200)]
drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit 64851a32c463e5 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: <stable@vger.kernel.org> # v5.16+ Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
drm/amdkfd: Use proper enum in pm_unmap_queues_v9()
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:267:3:
error: implicit conversion from enumeration type 'enum
mes_map_queues_extended_engine_sel_enum' to different enumeration type
'enum mes_unmap_queues_extended_engine_sel_enum'
[-Werror,-Wenum-conversion]
extended_engine_sel__mes_map_queues__sdma0_to_7_sel :
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Use 'extended_engine_sel__mes_unmap_queues__sdma0_to_7_sel' to eliminate
the warning, which is the same numeric value of the proper type.
Fixes: 009e9a158505 ("drm/amdkfd: navi2x requires extended engines to map and unmap sdma queues") Link: https://github.com/ClangBuiltLinux/linux/issues/1596 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang build fails with
amdgpu_ras.c:2416:7: error: variable 'ras_obj' is used uninitialized
whenever 'if' condition is true
if (adev->in_suspend || amdgpu_in_reset(adev)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
amdgpu_ras.c:2453:6: note: uninitialized use occurs here
if (ras_obj->ras_cb)
^~~~~~~
There is a logic error in the error handler's labels.
ex/ The sysfs: is the last goto label in the normal code but
is the middle of error handler. Rework the error handler.
cleanup: is the first error, so it's handler should be last.
interrupt: is the second error, it's handler is next. interrupt:
handles the failure of amdgpu_ras_interrupt_add_hander() by
calling amdgpu_ras_interrupt_remove_handler(). This is wrong,
remove() assumes the interrupt has been setup, not torn down by
add(). Change the goto label to cleanup.
sysfs is the last error, it's handler should be first. sysfs:
handles the failure of amdgpu_ras_sysfs_create() by calling
amdgpu_ras_sysfs_remove(). But when the create() fails there
is nothing added so there is nothing to remove. This error
handler is not needed. Remove the error handler and change
goto label to interrupt.
Fixes: b293e891b057 ("drm/amdgpu: add helper function to do common ras_late_init/fini (v3)") Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Thu, 17 Feb 2022 16:12:55 +0000 (11:12 -0500)]
drm/amdgpu: Dynamically initialize IP instance attributes
Dynamically initialize IP instance attributes. This eliminates bugs
stemming from adding new attributes to an IP instance.
Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Tom StDenis <tom.stdenis@amd.com> Fixes: 4d7ba312dd1f ("drm/amdgpu: Add "harvest" to IP discovery sysfs") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 15 Feb 2022 14:59:07 +0000 (09:59 -0500)]
drm/amd/amdgpu: Add APU flag to gca_config debugfs data (v3)
Needed by umr to detect if ip discovered ASIC is an APU or not.
(v2): Remove asic type from packet it's not strictly needed
(v3): Correct comment
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Refactor `amdgpu_aspm` to be evaluated per device
Evaluating `pcie_aspm_enabled` as part of driver probe has the implication
that if one PCIe bridge with an AMD GPU connected doesn't support ASPM
then none of them do. This is an invalid assumption as the PCIe core will
configure ASPM for individual PCIe bridges.
Create a new helper function that can be called by individual dGPUs to
react to the `amdgpu_aspm` module parameter without having negative results
for other dGPUs on the PCIe bus.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Wed, 16 Feb 2022 21:47:32 +0000 (16:47 -0500)]
drm/amdgpu: Fix ARM compilation warning
Fix this ARM warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:664:35: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t' {aka
'unsigned int'} [-Wformat=]
Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: kbuild-all@lists.01.org Cc: linux-kernel@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Fixes: a6c40b178092 ("drm/amdgpu: Show IP discovery in sysfs") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Check if ASPM is enabled from PCIe subsystem
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
yipechai [Tue, 15 Feb 2022 06:38:13 +0000 (14:38 +0800)]
drm/amdgpu: Remove redundant .ras_late_init initialization in some ras blocks
1. Define amdgpu_ras_block_late_init_default in amdgpu_ras.c as
.ras_late_init common function, which is called when
.ras_late_init of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_init to
initialize .ras_late_init in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yipechai [Mon, 14 Feb 2022 06:38:02 +0000 (14:38 +0800)]
drm/amdgpu: Optimize xxx_ras_late_init function of each ras block
1. Move calling ras block instance members from module internal
function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Tue, 26 Oct 2021 02:04:27 +0000 (10:04 +0800)]
drm/amdgpu/discovery: Add sw DM function for 3.1.6 DCE
Add 3.1.6 DCE IP and assign relevant sw DM function for the new DCE.
Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hansen Dsouza [Wed, 26 Jan 2022 20:44:50 +0000 (15:44 -0500)]
drm/amd/display: Add DCN316 resource and SMU clock manager
Add core DC implementation for DCN316.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Li [Thu, 27 Jan 2022 19:29:31 +0000 (14:29 -0500)]
drm/amd/display: Add DMUB support for DCN316
Initialize DMUB for DCN316. Use same funcs as DCN31 for
DCN316.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tong Zhang [Mon, 14 Feb 2022 19:58:20 +0000 (11:58 -0800)]
drm/i915: fix build issue when using clang
drm/i915 adds some extra cflags, namely -Wall, which causes instances of
-Wformat-security to appear when building with clang, even though this
warning is turned off kernel-wide in the main Makefile:
drivers/gpu/drm/i915/gt/intel_gt.c:983:2: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
GEM_TRACE("ERROR\n");
^~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/i915/i915_gem.h:76:24: note: expanded from macro 'GEM_TRACE'
#define GEM_TRACE(...) trace_printk(__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:369:3: note: expanded from macro 'trace_printk'
do_trace_printk(fmt, ##__VA_ARGS__); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:383:30: note: expanded from macro 'do_trace_printk'
__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
^~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_gt.c:983:2: note: treat the string as an argument to avoid this
This does not happen with GCC because it does not enable
-Wformat-security with -Wall. Disable -Wformat-security within the i915
Makefile so that these warnings do not show up with clang.
Jani Nikula [Tue, 15 Feb 2022 12:20:30 +0000 (14:20 +0200)]
drm/i915/gvt: #include drm_edid.h for drm_edid_block_valid()
As the excessive #includes from i915_drv.h were axed, kvmgt.c build
started failing. Add the necessary #include where needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 14da21cc4671 ("drm/i915: axe lots of unnecessary includes from i915_drv.h") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215122030.2741656-1-jani.nikula@intel.com
CC: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Fri, 28 Jan 2022 08:21:18 +0000 (13:51 +0530)]
drm/amdgpu: update vcn/jpeg PG flags for VCN 3.1.1
update vcn and jpeg power gating flags for VCN 3.1.1
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The message `Voltage value looks like a Leakage ID but it's not patched`
shows up as an error on Dell Precision 3540. This doesn't cause functional
problems and should be downgraded to info.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1162 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 15 Feb 2022 18:53:37 +0000 (19:53 +0100)]
drm/amd/display: For vblank_disable_immediate, check PSR is really used
Even if PSR is allowed for a present GPU, there might be no eDP link
which supports PSR.
Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changcheng Deng [Tue, 15 Feb 2022 09:11:42 +0000 (09:11 +0000)]
drm/amdkfd: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 28 Jan 2022 17:29:01 +0000 (12:29 -0500)]
drm/amd/display: Add dsc pre-validation in atomic check
[Why]
The previous change:
"Add affected crtcs to atomic state for dsc mst unplug"
forces modeset on all added crctc regardless whether timing changed or not.
Per our implementation of dsc we need modeset only if timing changed.
Otherwise dsc can be programmed incorrectly leading to dsc engine hang.
[How]
During atomic_check pre-compute dsc params.
Only set mode_changed if timing is changed.
Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if (!(tmp & flag)) condition will always evaluate to true
when the flag is 0x0 (AMDGPU_RLCG_GC_WRITE). Instead check
that address bits are cleared to determine whether
the command is complete.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Tested-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Sun, 6 Feb 2022 21:06:00 +0000 (16:06 -0500)]
drm/amd/display: add dsc mst stream pbn log for debug
[why]
payload and slot number of display on dsc mst hub will be
adjusted when there is change on any display on dsc hub.
to monitor dsc enable/disable, pbn change, we need add log.
[How]
add mst_pbn to dc_dsc_config of dc_crtc_timing.
add dsc, pbn, display name within dc_core_enable_stream,
dc_core_disable_stream, dc_stream_log
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 23 Dec 2021 22:39:57 +0000 (17:39 -0500)]
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.
[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)
Fixes: 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors") Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Mon, 24 Jan 2022 20:06:39 +0000 (15:06 -0500)]
drm/amd/display: enable z9 denial interface by default
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Mon, 14 Feb 2022 23:02:58 +0000 (18:02 -0500)]
drm/amdgpu: Add "harvest" to IP discovery sysfs
Add the "harvest" field to the IP attributes in
the IP discovery sysfs visualization, as this
field is present in the binary data.
At the time of this commit, the harvest data isn't
consistently correct in VBIOS, but it is exposed
for completeness, in the hopes that VBIOS will be
fixed in the future.
Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 2 Feb 2022 21:35:14 +0000 (16:35 -0500)]
drm/amd/display: make sure pipe power gating reach requested hw state
[why]
display mapping change will involved pipe power gating on and off.
when doing this too fase, sometimes usbc will have no display.
check HW status, it is still in pipe power gating.
[how]
insert polling HW status to make sure the required state reached.
also add dal registry key handling.
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Wed, 2 Feb 2022 21:08:45 +0000 (16:08 -0500)]
drm/amd/display: dsc mst re-compute pbn for changes on hub
[why]
when unplug 1 dp from dsc mst hub, atomic_check new request
dc_state only include info for the unplug dp. this will not
trigger re-compute pbn for displays still connected to hub.
[how] all displays connected to dsc hub are available in
dc->current_state, by comparing dc->current_state and new
request from atomic_chceck, it will provide info of
displays connected to hub and do pbn re-compute.
Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix for dmub outbox notification enable
[Why]
Currently driver enables dmub outbox notification before oubox ISR is
registered. During boot scenario, sometimes dmub issues hpd outbox
message before driver registers ISR and those messages are missed.
[How]
Enable dmub outbox notification after outbox ISR is registered. Also,
restructured outbox enable code to call from dm layer and renamed APIs.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 20 Jan 2022 11:16:19 +0000 (19:16 +0800)]
drm/amd/pm: fix some OEM SKU specific stability issues
Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU
specific stability issues.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / kernel / linux.git / log
