net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
====================
dev: Hold per-netns RTNL in register_netdev().
Patch 1 adds rtnl_net_lock_killable() and Patch 2 uses it in
register_netdev() and converts it and unregister_netdev() to
per-netns RTNL.
With this and the netdev notifier series [0], ASSERT_RTNL_NET()
for NETDEV_REGISTER [1] wasn't fired on a simplest QEMU setup
like e1000 + x86_64_defconfig + CONFIG_DEBUG_NET_SMALL_RTNL.
[1]:
---8<---
diff --git a/net/core/rtnl_net_debug.c b/net/core/rtnl_net_debug.c
index f406045cbd0e..c0c30929002e 100644
--- a/net/core/rtnl_net_debug.c
+++ b/net/core/rtnl_net_debug.c
@@ -21,7 +21,6 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
case NETDEV_DOWN:
case NETDEV_REBOOT:
case NETDEV_CHANGE:
- case NETDEV_REGISTER:
case NETDEV_UNREGISTER:
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
@@ -60,19 +59,10 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
ASSERT_RTNL();
break;
- /* Once an event fully supports RTNL_NET, move it here
- * and remove "if (0)" below.
- *
- * case NETDEV_XXX:
- * ASSERT_RTNL_NET(net);
- * break;
- */
- }
-
- /* Just to avoid unused-variable error for dev and net. */
- if (0)
+ case NETDEV_REGISTER:
ASSERT_RTNL_NET(net);
+ break;
+ }
Mohsin Bashir [Sat, 4 Jan 2025 01:53:16 +0000 (17:53 -0800)]
eth: fbnic: update fbnic_poll return value
In cases where the work done is less than the budget, `fbnic_poll` is
returning 0. This affects the tracing of `napi_poll`. Following is a
snippet of before and after result from `napi_poll` tracepoint. Instead,
returning the work done improves the manual tracing.
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Airoha EN7581 SoC supports 32 Tx DMA rings used to feed packets to QoS
channels. Each channels supports 8 QoS queues where the user can apply
QoS scheduling policies. In a similar way, the user can configure hw
rate shaping for each QoS channel.
Introduce ndo_select_queue callback in order to select the tx queue
based on QoS channel and QoS queue. In particular, for dsa device select
QoS channel according to the dsa user port index, rely on port id
otherwise. Select QoS queue based on the skb priority.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests/net: packetdrill: report benign debug flakes as xfail
A few recently added packetdrill tests that are known time sensitive
(e.g., because testing timestamping) occasionally fail in debug mode:
https://netdev.bots.linux.dev/contest.html?executor=vmksft-packetdrill-dbg
These failures are well understood. Correctness of the tests is
verified in non-debug mode. Continue running in debug mode also, to
keep coverage with debug instrumentation.
But, only in debug mode, mark these tests with well understood
timing issues as XFAIL (known failing) rather than FAIL when failing.
Introduce an allow list xfail_list with known cases.
Expand the ktap infrastructure with XFAIL support.
Fixes: eab35989cc37 ("selftests/net: packetdrill: import tcp/fast_recovery, tcp/nagle, tcp/timestamping") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20241218100013.0c698629@kernel.org/ Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250103113142.129251-1-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Furong Xu [Fri, 3 Jan 2025 09:37:33 +0000 (17:37 +0800)]
net: stmmac: Set dma_sync_size to zero for discarded frames
If a frame is going to be discarded by driver, this frame is never touched
by driver and the cache lines never become dirty obviously,
page_pool_recycle_direct() wastes CPU cycles on unnecessary calling of
page_pool_dma_sync_for_device() to sync entire frame.
page_pool_put_page() with sync_size setting to 0 is the proper method.
octeontx2-pf: mcs: Remove dead code and semi-colon from rsrc_name()
Every case in the switch-block ends with return statement, and the
default: branch handles the cases where rsrc_type is invalid and
returns "Unknown", this makes the return statement at the end of the
function unreachable and redundant.
The semi-colon is not required after the switch-block's curly braces.
Remove the semi-colon after the switch-block's curly braces and the
return statement at the end of the function.
Jakub Kicinski [Tue, 7 Jan 2025 00:33:44 +0000 (16:33 -0800)]
Merge branch 'mlx5-hardware-steering-part-2'
Tariq Toukan says:
====================
mlx5 Hardware Steering part 2
This series contain HWS code cleanups, enhancements, bug fixes, and
additions. Note that some of these patches are fixing bugs in existing
code, but we submit them without 'Fixes' tag to avoid the unnecessary
burden for stable releases, as HWS still couldn't be enabled.
Patches 1-5:
HWS, various code cleanups and enhancements
Patches 6-14:
HWS, various bug fixes and additions
Patch 15:
HWS, setting timeout on polling
====================
net/mlx5: HWS, set timeout on polling for completion
Consolidate BWC polling for completion into one function
and set a time limit on the loop that polls for completion.
This can happen only if there is some issue with FW/PCI/HW,
such as FW being stuck, PCI issue, etc.
Vlad Dogaru [Thu, 2 Jan 2025 18:14:11 +0000 (20:14 +0200)]
net/mlx5: HWS, handle returned error value in pool alloc
Handle all negative return values as errors, not just -1.
The code previously treated -ENOMEM (and potentially other negative
values) as valid segment numbers, leading to incorrect behavior.
This fix ensures that any negative return value is treated as an error.
net/mlx5: HWS, num_of_rules counter on matcher should be atomic
Rule counter in matcher's struct is used in two places:
1. As heuristics to decide when the number of rules have crossed a
certain percentage threshold and the matcher should be resized.
We don't mind here if the number will be off by 1-2 due to concurrency.
2. When destroying matcher, the counter value is checked and the
user is warned if it is not 0. Here we lock all the queues, so the
counter will be correct.
We don't need to always have *exact* number, but we do need this
number to not be corrupted, which is what is happening when the
counter isn't atomic, due to update by different threads.
net/mlx5: HWS, reduce memory consumption of a matcher struct
Instead of having a large array of action templates allocated with
kmalloc, have smaller array and allocate it with kvmalloc.
The size of the array represents the max number of AT attach
operations for the same matcher. This number is not expected
to be very high. In any case, when the limit is reached, the
next attempt to attach new AT will result in creation of a new
matcher and moving all the rules to this matcher.
net/mlx5: HWS, change error flow on matcher disconnect
Currently, when firmware failure occurs during matcher disconnect flow,
the error flow of the function reconnects the matcher back and returns
an error, which continues running the calling function and eventually
frees the matcher that is being disconnected.
This leads to a case where we have a freed matcher on the matchers list,
which in turn leads to use-after-free and eventual crash.
This patch fixes that by not trying to reconnect the matcher back when
some FW command fails during disconnect.
Note that we're dealing here with FW error. We can't overcome this
problem. This might lead to bad steering state (e.g. wrong connection
between matchers), and will also lead to resource leakage, as it is
the case with any other error handling during resource destruction.
However, the goal here is to allow the driver to continue and not crash
the machine with use-after-free error.
====================
net: pcs: add supported_interfaces bitmap for PCS
This series adds supported_interfaces for PCS, which gives MAC code
a way to determine the interface modes that the PCS supports without
having to implement functions such as xpcs_get_interfaces(), or
workarounds such as in
Patch 1 adds the new bitmask to struct phylink_pcs, and code within
phylink to validate that the PCS returned by the MAC driver supports
the interface mode - but only if this bitmask is non-empty.
Patch 2 through 4 fills in the interface modes for XPCS, Mediatek LynxI
and Lynx PCS.
Patch 5 adds support to stmmac to make use of this bitmask when filling
in phylink_config.supported_interfaces, eliminating the call to
xpcs_get_interfaces.
As xpcs_get_interfaces() is now unused outside of pcs-xpcs.c, patch 6
makes this function static and removes it from the header file.
====================
net: pcs: mtk-lynxi: fill in PCS supported_interfaces
Fill in the new PCS supported_interfaces member with the interfaces
that the Mediatek LynxI supports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tTffV-007RoP-8D@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phylink: add support for PCS supported_interfaces bitmap
Add support for the PCS to specify which interfaces it supports, which
can be used by MAC drivers to build the main supported_interfaces
bitmap. Phylink also validates that the PCS returned by the MAC driver
supports the interface that the MAC was asked for.
An empty supported_interfaces bitmap from the PCS indicates that it
does not provide this information, and we handle that appropriately.
Guillaume Nault [Thu, 2 Jan 2025 16:34:18 +0000 (17:34 +0100)]
sctp: Prepare sctp_v4_get_dst() to dscp_t conversion.
Define inet_sk_dscp() to get a dscp_t value from struct inet_sock, so
that sctp_v4_get_dst() can easily set ->flowi4_tos from a dscp_t
variable. For the SCTP_DSCP_SET_MASK case, we can just use
inet_dsfield_to_dscp() to get a dscp_t value.
Then, when converting ->flowi4_tos from __u8 to dscp_t, we'll just have
to drop the inet_dscp_to_dsfield() conversion function.
The last uses of igc_read_pcie_cap_reg() and igc_write_pcie_cap_reg()
were removed in 2019 by
commit 16ecd8d9af26 ("igc: Remove the obsolete workaround")
The last useof i40e_dcb_hw_get_num_tc() was removed in 2022 by
commit fe20371578ef ("Revert "i40e: Fix reset bw limit when DCB enabled
with 1 TC"")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-10-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e_commit_partition_bw_setting() was added in 2017 by
commit 4fc8c6763957 ("i40e: genericize the partition bandwidth control")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-8-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of i40e_get_cur_guaranteed_fd_count() was removed in 2015 by
commit 04294e38a451 ("i40e: FD filters flush policy changes")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-6-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e_read_phy_register() and i40e_write_phy_register() were added in
2016 by
commit f62ba91458b5 ("i40e: Add functions which apply correct PHY access
method for read and write operation")
but haven't been used.
Remove them.
(There are more specific _clause* variants of these functions
that are still used.)
i40e_blink_phy_link_led() was added in 2016 by
commit fd077cd3399b ("i40e: Add functions to blink led on 10GBaseT PHY")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e_aq_add_mirrorrule(), i40e_aq_delete_mirrorrule() and
i40e_aq_set_vsi_vlan_promisc() were added in 2016 by
commit 7bd6875bef70 ("i40e: APIs to Add/remove port mirroring rules")
but haven't been used.
They were the last user of i40e_mirrorrule_op().
i40e_aq_rearrange_nvm() was added in 2018 by
commit f05798b4ff82 ("i40e: Add AQ command for rearrange NVM structure")
but hasn't been used.
i40e_aq_restore_lldp() was added in 2019 by
commit c65e78f87f81 ("i40e: Further implementation of LLDP")
but hasn't been used.
Daniel Borkmann [Fri, 20 Dec 2024 23:46:56 +0000 (00:46 +0100)]
netkit: Allow for configuring needed_{head,tail}room
Allow the user to configure needed_{head,tail}room for both netkit
devices. The idea is similar to 163e529200af ("veth: implement
ndo_set_rx_headroom") with the difference that the two parameters
can be specified upon device creation. By default the current behavior
stays as is which is needed_{head,tail}room is 0.
In case of Cilium, for example, the netkit devices are not enslaved
into a bridge or openvswitch device (rather, BPF-based redirection
is used out of tcx), and as such these parameters are not propagated
into the Pod's netns via peer device.
Given Cilium can run in vxlan/geneve tunneling mode (needed_headroom)
and/or be used in combination with WireGuard (needed_{head,tail}room),
allow the Cilium CNI plugin to specify these two upon netkit device
creation.
Furong Xu [Fri, 20 Dec 2024 08:07:26 +0000 (16:07 +0800)]
net: stmmac: TSO: Simplify the code flow of DMA descriptor allocations
The TCP Segmentation Offload (TSO) engine is an optional function in
DWMAC cores, it is implemented for dwmac4 and dwxgmac2 only, ancient
dwmac100 and dwmac1000 are not supported by hardware. Current driver
code checks priv->dma_cap.tsoen which is read from MAC_HW_Feature1
register to determine if TSO is enabled in hardware configurations,
if (!priv->dma_cap.tsoen) driver never sets NETIF_F_TSO for net_device.
This patch never affects dwmac100/dwmac1000 and their stmmac_desc_ops:
ndesc_ops/enh_desc_ops, since TSO is never supported by them two.
The DMA AXI address width of DWMAC cores can be configured to
32-bit/40-bit/48-bit, then the format of DMA transmit descriptors
get a little different between 32-bit and 40-bit/48-bit.
Current driver code checks priv->dma_cap.addr64 to use certain format
with certain configuration.
This patch converts the format of DMA transmit descriptors on dwmac4
and dwxgmac2 that the DMA AXI address width is configured to 32-bit (as
described by function comments of stmmac_tso_xmit() in current code) to
a more generic format (see updated function comments after this patch)
which is actually already used on 40-bit/48-bit platforms to provide
better compatibility and make code flow cleaner in TSO TX routine.
Another interesting finding, struct stmmac_desc_ops is a common abstract
interface to maintain descriptors, we should avoid the direct assignment
of descriptor members (e.g. desc->des0), stmmac_set_desc_addr() is the
proper method yet. This patch tries to improve this by the way.
Tested and verified on:
DWMAC CORE 5.00a with 32-bit DMA AXI address width
DWMAC CORE 5.10a with 32-bit DMA AXI address width
DWXGMAC CORE 3.20a with 40-bit DMA AXI address width
Linus Torvalds [Fri, 3 Jan 2025 22:36:54 +0000 (14:36 -0800)]
Merge tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
Linus Torvalds [Fri, 3 Jan 2025 19:09:35 +0000 (11:09 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
Linus Torvalds [Fri, 3 Jan 2025 18:57:57 +0000 (10:57 -0800)]
Merge tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A small Kconfig fixup for the i.MX.
In principle this could come in from the SoC tree but the bug was
introduced from the pin control tree so let's fix it from here.
- Fix a sleep in atomic context in the MCP23xxx GPIO expander by
disabling the regmap locking and using explicit mutex locks.
* tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking
ARM: imx: Re-introduce the PINCTRL selection
Linus Torvalds [Fri, 3 Jan 2025 18:54:51 +0000 (10:54 -0800)]
Merge tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The first new year pull request: no surprises, all small fixes,
including:
- Follow-up fixes for the new compress-offload API extension
- A couple of fixes for MIDI 2.0 UMP handling
- A trivial race fix for OSS sequencer emulation ioctls
- USB-audio and HD-audio fixes / quirks"
* tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Check UMP support for midi_version change
ALSA hda/realtek: Add quirk for Framework F111:000C
Revert "ALSA: ump: Don't enumeration invalid groups for legacy rawmidi"
ALSA: seq: oss: Fix races at processing SysEx messages
ALSA: compress_offload: fix remaining descriptor races in sound/core/compress_offload.c
ALSA: compress_offload: Drop unneeded no_free_ptr()
ALSA: hda/tas2781: Ignore SUBSYS_ID not found for tas2563 projects
ALSA: usb-audio: US16x08: Initialize array before use
Linus Torvalds [Fri, 3 Jan 2025 18:06:44 +0000 (10:06 -0800)]
Merge tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Happy New Year.
It was fairly quiet for holidays period, certainly nothing that worth
getting off the couch before I needed to, this is for the past two
weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc
happening next week, but otherwise all quiet.
xe:
- uapi: Revert some devcoredump file format changes breaking a mesa
debug tool
- Fixes around waits when moving to system
- Fix a typo when checking for LMEM provisioning
- Fix a fault on fd close after unbind
- A couple of OA fixes squashed for stable backporting
adv7511:
- fix UAF
- drop single lane support
- audio infoframe fix"
* tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel:
xe/oa: Fix query mode of operation for OAR/OAC
drm/i915/dg1: Fix power gate sequence.
drm/i915/cx0_phy: Fix C10 pll programming sequence
drm/xe: Fix fault on fd close after unbind
drm/xe/pf: Use correct function to check LMEM provisioning
drm/xe: Wait for migration job before unmapping pages
drm/xe: Use non-interruptible wait when moving BO to system
drm/xe: Revert some changes that break a mesa debug tool
drm: adv7511: Drop dsi single lane support
dt-bindings: display: adi,adv7533: Drop single lane support
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
drm/bridge: adv7511_audio: Update Audio InfoFrame properly
Linus Torvalds [Fri, 3 Jan 2025 18:04:43 +0000 (10:04 -0800)]
Merge tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are
registered and unregistered. The __ftrace_return_to_handler() can
handle reading either the old value or the new value. But once it
reads that value it must stay consistent otherwise the check that
looks to see if the value is a stub may show false, but if the
compiler decides to re-read after that check, it can be true which
can cause the code to crash later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops
became independent from the top level set_ftrace_filter. In the
process the function profiler received its own filter ops as well.
But the function profiler uses the top level set_ftrace_filter file
and does not have one of its own. In giving it its own filter ops, it
lost any user interface it once had. Make it use the top level
set_ftrace_filter file again. This fixes a regression.
* tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix function profiler's filtering functionality
fgraph: Add READ_ONCE() when accessing fgraph_array[]
Mark Zhang [Thu, 19 Dec 2024 12:23:36 +0000 (14:23 +0200)]
RDMA/mlx5: Enable multiplane mode only when it is supported
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port") Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org Cc: stable@vger.kernel.org Reported-by: Francesco Poli <invernomuto@paranoici.org> Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/ Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Octavian Purdila [Mon, 30 Dec 2024 20:56:47 +0000 (12:56 -0800)]
team: prevent adding a device which is already a team device lower
Prevent adding a device which is already a team device lower,
e.g. adding veth0 if vlan1 was already added and veth0 is a lower of
vlan1.
This is not useful in practice and can lead to recursive locking:
$ ip link add veth0 type veth peer name veth1
$ ip link set veth0 up
$ ip link set veth1 up
$ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1
$ ip link add team0 type team
$ ip link set veth0.1 down
$ ip link set veth0.1 master team0
team0: Port device veth0.1 added
$ ip link set veth0 down
$ ip link set veth0 master team0
============================================
WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted
--------------------------------------------
ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977)
other info that might help us debug this:
Possible unsafe locking scenario:
David S. Miller [Fri, 3 Jan 2025 11:54:06 +0000 (11:54 +0000)]
Merge branch 'net-iep-clock-module-fixes'
Meghana Malladi says:
====================
IEP clock module bug fixes
This series has some bug fixes for IEP module needed by PPS and
timesync operations.
Patch 1/2 fixes firmware load sequence to run all the firmwares
when either of the ethernet interfaces is up. Move all the code
common for firmware bringup under common functions.
Patch 2/2 fixes distorted PPS signal when the ethernet interfaces
are brough down and up. This patch also fixes enabling PPS signal
after bringing the interface up, without disabling PPS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Meghana Malladi [Mon, 23 Dec 2024 15:15:50 +0000 (20:45 +0530)]
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
When ICSSG interfaces are brought down and brought up again, the
pru cores are shut down and booted again, flushing out all the memories
and start again in a clean state. Hence it is expected that the
IEP_CMP_CFG register needs to be flushed during iep_init() to ensure
that the existing residual configuration doesn't cause any unusual
behavior. If the register is not cleared, existing IEP_CMP_CFG set for
CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values.
After bringing the interface up, calling PPS enable doesn't work as
the driver believes PPS is already enabled, (iep->pps_enabled is not
cleared during interface bring down) and driver will just return true
even though there is no signal. Fix this by disabling pps and perout.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.
As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).
Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.
Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.
Move prueth_emac_stop() from common to sr1 driver.
sr1 and sr2 drivers have different logic handling for stopping
the firmwares. While sr1 driver is dependent on emac structure
to stop the corresponding pru cores for that slice, for sr2
all the pru cores of both the slices are stopped and is not
dependent on emac. So the prueth_emac_stop() function is no
longer common and can be moved to sr1 driver.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Jan 2025 02:44:05 +0000 (18:44 -0800)]
Merge branch 'mptcp-rx-path-fixes'
Matthieu Baerts says:
====================
mptcp: rx path fixes
Here are 3 different fixes, all related to the MPTCP receive buffer:
- Patch 1: fix receive buffer space when recvmsg() blocks after
receiving some data. For a fix introduced in v6.12, backported to
v6.1.
- Patch 2: mptcp_cleanup_rbuf() can be called when no data has been
copied. For 5.11.
- Patch 3: prevent excessive coalescing on receive, which can affect the
throughput badly. It looks better to wait a bit before backporting
this one to stable versions, to get more results. For 5.10.
====================
Paolo Abeni [Mon, 30 Dec 2024 18:12:32 +0000 (19:12 +0100)]
mptcp: prevent excessive coalescing on receive
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()") Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 30 Dec 2024 18:12:31 +0000 (19:12 +0100)]
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
Under some corner cases the MPTCP protocol can end-up invoking
mptcp_cleanup_rbuf() when no data has been copied, but such helper
assumes the opposite condition.
Explicitly drop such assumption and performs the costly call only
when strictly needed - before releasing the msk socket lock.
Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-2-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 30 Dec 2024 18:12:30 +0000 (19:12 +0100)]
mptcp: fix recvbuffer adjust on sleeping rcvmsg
If the recvmsg() blocks after receiving some data - i.e. due to
SO_RCVLOWAT - the MPTCP code will attempt multiple times to
adjust the receive buffer size, wrongly accounting every time the
cumulative of received data - instead of accounting only for the
delta.
Address the issue moving mptcp_rcv_space_adjust just after the
data reception and passing it only the just received bytes.
This also removes an unneeded difference between the TCP and MPTCP
RX code path implementation.
Fixes: 581302298524 ("mptcp: error out earlier on disconnect") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-1-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 30 Dec 2024 16:28:49 +0000 (16:28 +0000)]
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
ipc_mmio_init() used the post-decrement operator in its loop continuing
condition of "retries" counter being "> 0", which meant that when this
condition caused loop exit "retries" counter reached -1.
But the later valid exec stage failure check only tests for "retries"
counter being exactly zero, so it didn't trigger in this case (but
would wrongly trigger if the code reaches a valid exec stage in the
very last loop iteration).
Fix this by using the pre-decrement operator instead, so the loop counter
is exactly zero on valid exec stage failure.
Yu Tian [Tue, 31 Dec 2024 02:36:10 +0000 (10:36 +0800)]
ipv4: remove useless arg
The "struct sock *sk" parameter in ip_rcv_finish_core is unused, which
leads the compiler to optimize it out. As a result, the
"struct sk_buff *skb" parameter is passed using x1. And this make kprobe
hard to use.
Fixes: 8c7138b33e5c ("net: Unpublish sk from sk_reuseport_cb before call_rcu") Reported-by: syzbot+b3e02953598f447d4d2a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6772f2f4.050a0220.2f3838.04cb.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241231160527.3994168-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header.
Fixes: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Closes: https://lore.kernel.org/netdev/CANn89iK1hdC3Nt8KPhOtTF8vCPc1AHDCtse_BTNki1pWxAByTQ@mail.gmail.com/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250101164909.1331680-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Liang Jie [Mon, 30 Dec 2024 09:37:09 +0000 (17:37 +0800)]
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
In efx_tc_ct_zone_ht_params, the key_len was previously set to
offsetof(struct efx_tc_ct_zone, linkage). This calculation is incorrect
because it includes any padding between the zone field and the linkage
field due to structure alignment, which can vary between systems.
This patch updates key_len to use sizeof_field(struct efx_tc_ct_zone, zone)
, ensuring that the hash table correctly uses the zone as the key. This fix
prevents potential hash lookup errors and improves connection tracking
reliability.
Fixes: c3bb5c6acd4e ("sfc: functions to register for conntrack zone offload") Signed-off-by: Liang Jie <liangjie@lixiang.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241230093709.3226854-1-buaajxlj@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parav Pandit [Tue, 24 Dec 2024 18:37:06 +0000 (20:37 +0200)]
devlink: Improve the port attributes description
Current PF number description is vague, sometimes interpreted as
some PF index. VF number in the PCI specification starts at 1; however
in kernel, it starts at 0 for representor model.
Improve the description of devlink port attributes PF, VF and SF
numbers with these details.
Thomas Weißschuh [Sun, 22 Dec 2024 20:08:20 +0000 (21:08 +0100)]
ptp: ocp: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Heiner Kallweit [Fri, 20 Dec 2024 22:02:06 +0000 (23:02 +0100)]
net: phy: fix phy_disable_eee
genphy_c45_write_eee_adv() becomes a no-op if phydev->supported_eee
is cleared. That's not what we want because this function is still
needed to clear the EEE advertisement register(s).
Fill phydev->eee_broken_modes instead to ensure that userspace
can't re-enable EEE advertising.
Dave Airlie [Fri, 3 Jan 2025 00:28:43 +0000 (10:28 +1000)]
Merge tag 'drm-xe-fixes-2024-12-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Revert some devcoredump file format changes
breaking a mesa debug tool (John)
Driver Changes:
- Fixes around waits when moving to system (Nirmoy)
- Fix a typo when checking for LMEM provisioning (Michal)
- Fix a fault on fd close after unbind (Lucas)
Kohei Enju [Wed, 1 Jan 2025 19:08:20 +0000 (04:08 +0900)]
ftrace: Fix function profiler's filtering functionality
Commit c132be2c4fcc ("function_graph: Have the instances use their own
ftrace_ops for filtering"), function profiler (enabled via
function_profile_enabled) has been showing statistics for all functions,
ignoring set_ftrace_filter settings.
While tracers are instantiated, the function profiler is not. Therefore, it
should use the global set_ftrace_filter for consistency. This patch
modifies the function profiler to use the global filter, fixing the
filtering functionality.
Before (filtering not working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
schedule 314 22290594 us 70989.15 us 40372231 us
x64_sys_call 1527 8762510 us 5738.382 us 3414354 us
schedule_hrtimeout_range 176 8665356 us 49234.98 us 405618876 us
__x64_sys_ppoll 324 5656635 us 17458.75 us 19203976 us
do_sys_poll 324 5653747 us 17449.83 us 19214945 us
schedule_timeout 67 5531396 us 82558.15 us 2136740827 us
__x64_sys_pselect6 12 3029540 us 252461.7 us 63296940171 us
do_pselect.constprop.0 12 3029532 us 252461.0 us 63296952931 us
```
After (filtering working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
vfs_write 462 68476.43 us 148.217 us
25874.48 us
vfs_read 641 9611.356 us 14.994 us
28868.07 us
vfs_fstat 890 878.094 us 0.986 us
1.667 us
vfs_fstatat 227 757.176 us 3.335 us
18.928 us
vfs_statx 226 610.610 us 2.701 us
17.749 us
vfs_getattr_nosec 1187 460.919 us 0.388 us
0.326 us
vfs_statx_path 297 343.287 us 1.155 us
11.116 us
vfs_rename 6 291.575 us 48.595 us
9889.236 us
```
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250101190820.72534-1-enjuk@amazon.com Fixes: c132be2c4fcc ("function_graph: Have the instances use their own ftrace_ops for filtering") Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
projects / thirdparty / kernel / linux.git / log
