Peter Rajnoha [Mon, 25 Nov 2013 13:38:00 +0000 (14:38 +0100)]
lvm: do not run pvscan for lvmetad update
The lvmetad daemon is not yet running in initramfs so there's no
need to run pvscan (or instantiate any lvm2-pvscan systemd service).
If pvscan was called in this case (either directly or via systemd
instantiated service), it would fail because there's no lvmetad
daemon to update. This could cause confusion, especially in systemd
instantiated service which is run only once!
Colin Guthrie [Sat, 2 Nov 2013 11:26:30 +0000 (11:26 +0000)]
dracut-functions.sh: Avoid loading unnecessary 32-bit libraries for 64-bit initrds
Due to the 'inst_libdir_file "libnss_files*"' in the udev-rules module
this caues the /usr/lib/libnss_files-2.18.so* to be included. This is a
32-bit library and pulls in a 32-bit version of glibc also even on a
64-bit system.
This is due to the fact that ldconfig -pN will print [/usr]/lib paths
from the cache as well as [/usr]/lib64. As we handle these paths
specifically we should ignore these results from the cache.
Also there was a missing space when appending the ldconfig paths
onto our list meaning the last builtin and first ldconfig path
were unusable.
Alexander Tsoy [Wed, 9 Oct 2013 03:02:56 +0000 (07:02 +0400)]
resume: remove resume-genrules.sh
parse-resume.sh already contains all the code from resume-genrules.sh.
Also parse-resume.sh is executed before resume-genrules.sh, so there is
no point to keep the latter.
This fixes the following error messages:
dracut-initqueue: ln: failed to create symbolic link '/dev/resume': File exists
dracut-initqueue: rm: cannot remove '/lib/dracut/hooks/initqueue/settled/resume.sh': No such file or directory
dracut-initqueue: rm: cannot remove '/lib/dracut/hooks/initqueue/timeout/resume.sh': No such file or directory
Alexander Tsoy [Wed, 9 Oct 2013 02:39:46 +0000 (06:39 +0400)]
resume: fix swap detection in hostonly
Check for other possible fs types. This fixes swap detection when using
TuxOnIce kernel.
Note that parse-resume.sh generate udev rules with support for
ID_FS_TYPE=suspend, but we do not include it here, because it is
libvolume_id thing and host_fs_types is populated using blkid.
P J P [Fri, 11 Oct 2013 13:56:51 +0000 (19:26 +0530)]
Add lzo, lz4 compression and read INITRD_COMPRESS
This patch adds support for lzop(1) & lz4(1) compression
algorithms to compress iniramfs image file. Both are supported
by the Linux kernel.
Linux kernel exports user's choice of initramfs compression
algorithm as a shell environment variable: INITRD_COMPRESS.
This patch adds support to read this variable and duly compress
the initramfs image file.
Environment variable INITRD_COMPRESS has less precedence than the
command line options --gzip, etc. Ie. command line options could
override the compression algorithm defined by $INITRD_COMPRESS.
Signed-off-by: P J P <ppandit@redhat.com>
[Edited-by: Harald Hoyer: add documentation about lzo and lz4]
Harald Hoyer [Wed, 16 Oct 2013 09:30:08 +0000 (11:30 +0200)]
lvm: fix thin recognition
The global var setting was happening in a pipe and did not have an
effect.
Use <<<$() instead.
< <() cannot be used, because dracut is called in chroot's environments,
where /dev/fd does not point to /proc/self/fd, but bash wants
/dev/fd/<num> for this construct.
Brian C. Lane [Tue, 8 Oct 2013 13:13:44 +0000 (15:13 +0200)]
dmsquash-live: add /dev/mapper/live-base
This is similar to the reason for adding the
/run/initramfs/live-baseloop symlink -- access to the original live
image without overlays.
livemedia-creator does not create a osmin.img, so there is no mountable
device for it to use when rsyncing the live image to the target. It
needs a device that points to the original live image without overlays.
Note that lmc won't be creating osmin.img, since really isn't needed any
longer. Its purpose was to provide a minimal image that could be dd'd to
the target. Now that we use rsync this is no longer necessary.
The included patch adds a /dev/mapper/live-base device that Anaconda can
use whether or not there is an osmin present.
Peter Rajnoha [Fri, 4 Oct 2013 08:41:24 +0000 (10:41 +0200)]
lvm/mdraid: Fix LVM on MD activation
The 69-dm-lvm-metad.rules set some udev env. variables that makes it
possible to detect the right time to activate LVM on MD. The MD is very
similar to DM during activation - it's usable only after proper device
activation - the CHANGE event. We need to make a difference between a
CHANGE event that comes from this activation and CHANGE event that is
the outcome of the WATCH udev rule (otherwise we'd end up with LVM
activation done on each CHANGE event - which is wrong).
So we need the udev databse to be persistent during pivot to root fs
even for MD devices.
Thomas Renninger [Fri, 27 Sep 2013 18:10:39 +0000 (20:10 +0200)]
dracut: Implement ACPI table overriding
An example config file for this feature could be:
/etc/dracut.conf.d/03-acpi-override.conf
with this content:
acpi_override="yes"
acpi_table_dir="/etc/dracut.conf.d/acpi_tables"
Then all files ending with *.aml will be put into the early cpio
(kernel/firmware/acpi) and will be used to replace the BIOS provided tables
if the kernel supports this feature.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Renninger <trenn@suse.de>
Thomas Renninger [Fri, 27 Sep 2013 18:10:38 +0000 (20:10 +0200)]
dracut: Do not create early_cpio if no suitable microcode exist in hostonly case
Intel microcodes only exist for very specific family/model/stepping CPUs.
If no microcode gets added, there is no need to create an empty
(only directories) cpio later that gets glued to the initrd.
This also fixes:
*** Constructing GenuineIntel.bin ****
cat: /lib/firmware/intel-ucode/06-3c-03: No such file or directory
in hostonly mode if there is no suitable microcode for the CPU.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Renninger <trenn@suse.de>
Thomas Renninger [Fri, 27 Sep 2013 18:10:37 +0000 (20:10 +0200)]
dracut: Generlize microcode early cpio usage
ACPI early table override also may need to place files into an early cpio.
Reflect this in variable and file names.
This change is renaming only and does not introduce any real change.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Renninger <trenn@suse.de>
Colin Walters [Wed, 11 Sep 2013 13:04:45 +0000 (09:04 -0400)]
dracut.sh: Fixup previous commit to only read /sys and /proc in hostonly mode
The gnome-ostree build system generates dracut initramfs images on the
build server, therefore not in hostonly mode. The build system at the
moment doesn't mount /sys, and the previous commit caused a hard
failure due to lack of /sys/devices.
Because we only want /sys/devices in hostonly mode, just move those
bits inside the hostonly conditional above.
projects / thirdparty / dracut.git / log
