Dave Airlie [Tue, 3 Feb 2026 05:21:13 +0000 (15:21 +1000)]
nouveau/gsp: fix suspend/resume regression on r570 firmware
The r570 firmware with certain GPUs (at least RTX6000) needs this
flag to reflect the suspend vs runtime PM state of the driver.
This uses that info to set the correct flags to the firmware.
This fixes a regression on RTX6000 and other GPUs since r570 firmware
was enabled.
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144") Cc: <stable@vger.kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260203052431.2219998-4-airlied@gmail.com
Dave Airlie [Tue, 3 Feb 2026 05:21:12 +0000 (15:21 +1000)]
nouveau: add a third state to the fini handler.
This is just refactoring to allow the lower layers to distinguish
between suspend and runtime suspend.
GSP 570 needs to set a flag with the GPU is going into GCOFF,
this flag taken from the opengpu driver is set whenever runtime
suspend is enterning GCOFF but not for normal suspend paths.
This just refactors the code, a subsequent patch use the information.
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144") Cc: <stable@vger.kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260203052431.2219998-3-airlied@gmail.com
Dave Airlie [Tue, 3 Feb 2026 05:21:11 +0000 (15:21 +1000)]
nouveau/gsp: use rpc sequence numbers properly.
There are two layers of sequence numbers, one at the msg level
and one at the rpc level.
570 firmware started asserting on the sequence numbers being
in the right order, and we would see nocat records with asserts
in them.
Add the rpc level sequence number support.
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144") Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Tested-by: Lyude Paul <lyude@redhat.com> Link: https://patch.msgid.link/20260203052431.2219998-2-airlied@gmail.com
According to Thomas, commit d930ffa5d6e8 ("drm/gma500: use
drm_crtc_vblank_crtc()") breaks the driver with a NULL-ptr oops on
startup. This is because the IRQ initialization in gma_irq_install() now
uses CRTCs that are only allocated later in psb_modeset_init(). Stack
trace is below. Revert. Go back to the drawing board.
Johan Hovold [Thu, 30 Oct 2025 16:34:56 +0000 (17:34 +0100)]
drm/imx/tve: fix probe device leak
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Cc: stable@vger.kernel.org # 3.10 Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tvrtko Ursulin [Fri, 23 Jan 2026 14:15:40 +0000 (14:15 +0000)]
drm: Do not allow userspace to trigger kernel warnings in drm_gem_change_handle_ioctl()
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn> Fixes: 53096728b891 ("drm: Add DRM prime interface to reassign GEM handle") Cc: David Francis <David.Francis@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> # v6.18+ Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20260123141540.76540-1-tvrtko.ursulin@igalia.com
drm/i915/display: Fix color pipeline enum name leak
intel_color_pipeline_plane_init() allocates enum names for color
pipelines, which are copied by drm_property_create_enum(). The temporary
strings were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and free
them on all exit paths.
Fixes: ef105316819d ("drm/i915/color: Create a transfer function color pipeline") Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260113102303.724205-5-chaitanya.kumar.borah@intel.com
vkms_initialize_colorops() allocates enum names for color pipelines,
which are copied by drm_property_create_enum(). The temporary strings
were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and
free them on all exit paths
drm/amd/display: Fix color pipeline enum name leak
dm_plane_init_colorops() allocates enum names for color pipelines.
These are eventually passed to drm_property_create_enum() which create
its own copies of the string. Free the strings after initialization
is done.
Also, allocate color pipeline enum names only after successfully creating
color pipeline.
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block") Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Acked-by: Alex Deucher <alexander.deucher@amd.com> #irc Link: https://patch.msgid.link/20260113102303.724205-3-chaitanya.kumar.borah@intel.com
* Implement missing DCB connectors in uconn.c previously defined in conn.h.
* Replace kernel WARN_ON macro with printk message to more gracefully signify
an unknown connector was encountered.
With this patch, unknown connectors are explicitly marked with value 0
(DCB_CONNECTOR_VGA) to match the tested current behavior. Although 0xff
(DCB_CONNECTOR_NONE) may be more suitable, I don't want to introduce a
breaking change.
Alex Ramírez [Sat, 13 Dec 2025 00:53:26 +0000 (19:53 -0500)]
drm/nouveau: add missing DCB connector types
* Add missing DCB connectors in conn.h as per the NVIDIA DCB specification.
A lot of connector logic was rewritten for Linux v6.5; some display connector types
went unaccounted-for which caused kernel warnings on devices with the now-unsupported
DCB connectors. This patch adds all of the DCB connectors as defined by NVIDIA to the
dcb_connector_type enum to bring back support for these connectors to the new logic.
drm/bridge: synopsys: dw-dp: fix error paths of dw_dp_bind
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Simona Vetter [Fri, 16 Jan 2026 19:27:20 +0000 (20:27 +0100)]
Merge tag 'drm-misc-fixes-2026-01-16' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
Ivan Lipski [Tue, 13 Jan 2026 22:29:59 +0000 (17:29 -0500)]
drm/amd/display: Add an hdmi_hpd_debounce_delay_ms module
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1ed9 ("drm/amd/display: Add an HPD filter for HDMI") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859 Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a681cd9034587fe3550868bacfbd639d1c6891f)
drm/amdgpu/userq: Fix fence reference leak on queue teardown v2
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c71 ("drm/amdgpu/userq: move some code around") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8d45caf6a866d4ff842105b577953bb)
drm/amdkfd: No need to suspend whole MES to evict process
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e1f ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765 Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b96a6e9da65b94ac3b58ee288239b731)
It’s better to validate VM TLB flushes in the flush‑TLB backend
rather than in the generic VM layer.
Reverting this patch depends on
commit fa7c231fc2b0 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
being present in the tree.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9163fe4d790fb4e16d6b0e23f55b43cddd3d4a65)
Prike Liang [Tue, 6 Jan 2026 09:00:57 +0000 (17:00 +0800)]
drm/amdgpu: validate the flush_gpu_tlb_pasid()
Validate flush_gpu_tlb_pasid() availability before flushing tlb.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f4db9913e4d3dabe9ff3ea6178f2c1bc286012b8)
Yang Wang [Tue, 6 Jan 2026 06:42:40 +0000 (14:42 +0800)]
drm/amd/pm: fix smu overdrive data type wrong issue on smu 14.0.2
resolving the issue of incorrect type definitions potentially causing calculation errors.
Fixes: 54f7f3ca982a ("drm/amdgpu/swm14: Update power limit logic") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e3a03d0ae16d6b56e893cce8e52b44140e1ed985)
drm/amd/display: Initialise backlight level values from hw
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d82a0cd2b06a4bb43272fa6f1bc8adc1) Cc: stable@vger.kernel.org
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780 Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ade46c09fb184579b81acadf36dcb91e) Cc: stable@vger.kernel.org
drm/amd/display: Show link name in PSR status message
[Why]
The PSR message was moved in commit 4321742c394e ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c394e ("drm/amd/display: Move PSR support message into amdgpu_dm") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229c0766b980ae05affcf9f742d97de6a)
Haoxiang Li [Thu, 8 Jan 2026 07:18:22 +0000 (15:18 +0800)]
drm/amdkfd: fix a memory leak in device_queue_manager_init()
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc8f ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA") Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286bb9919a0952c812872da1dcfe9d390) Cc: stable@vger.kernel.org
Alex Deucher [Fri, 9 Jan 2026 13:54:55 +0000 (08:54 -0500)]
drm/amdgpu: make sure userqs are enabled in userq IOCTLs
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651601cddce7ff2a9f09479f3636f684d) Cc: stable@vger.kernel.org
Fixes: ce0478b02ed2 ("Merge tag 'v6.18-rc6' into drm-next") Signed-off-by: Peter Colberg <pcolberg@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 38a0f4cf8c6147fd10baa206ab349f8ff724e391)
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b4332c10f8b56c33a9c5431b52ecff9aab) Cc: stable@vger.kernel.org
Philip Yang [Thu, 4 Dec 2025 17:13:05 +0000 (12:13 -0500)]
drm/amdgpu: Fix gfx9 update PTE mtype flag
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016abe4103c0f0fac882811aea961ef213) Cc: stable@vger.kernel.org
Commit 6046b49bafff ("drm/sysfb: Share helpers for integer validation")
and commit e8c086880b2b ("drm/sysfb: Share helpers for screen_info
validation") added duplicate function declarations. Remove the latter
ones.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: e8c086880b2b ("drm/sysfb: Share helpers for screen_info validation") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.16+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260108145058.56943-7-tzimmermann@suse.de
Lyude Paul [Fri, 19 Dec 2025 21:52:03 +0000 (16:52 -0500)]
drm/nouveau/kms/nv50-: Assert we hold nv50_disp->lock in nv50_head_flush_*
Now that we've had one bug that occurred in nouveau as the result of
nv50_head_flush_* being called without the appropriate locks, let's add
some lockdep asserts to make sure this doesn't happen in the future.
Lyude Paul [Fri, 19 Dec 2025 21:52:02 +0000 (16:52 -0500)]
drm/nouveau/disp/nv50-: Set lock_core in curs507a_prepare
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type into their own source files") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Marek Vasut [Sat, 10 Jan 2026 15:27:28 +0000 (16:27 +0100)]
drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Ben Dooks [Thu, 8 Jan 2026 20:12:03 +0000 (15:12 -0500)]
drm/i915/guc: make 'guc_hw_reg_state' static as it isn't exported
The guc_hw_reg_state array is not exported, so make it static.
Fixes the following sparse warning:
drivers/gpu/drm/i915/i915_gpu_error.c:692:3: warning: symbol 'guc_hw_reg_state' was not declared. Should it be static?
Linus Torvalds [Mon, 12 Jan 2026 01:07:56 +0000 (15:07 -1000)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes: Fix missing MMU protection for AES S-box
MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY"
lib/crypto: tests: Fix syntax error for old python versions
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
Linus Torvalds [Sun, 11 Jan 2026 17:27:44 +0000 (07:27 -1000)]
Merge tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
rust_binder: remove spin_lock() in rust_shrink_free_page()
mei: me: add nova lake point S DID
counter: 104-quad-8: Fix incorrect return value in IRQ handler
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
Linus Torvalds [Sun, 11 Jan 2026 17:11:53 +0000 (07:11 -1000)]
Merge tag 'sched-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a crash in sched_mm_cid_after_execve()"
* tag 'sched-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mm_cid: Prevent NULL mm dereference in sched_mm_cid_after_execve()
Linus Torvalds [Sun, 11 Jan 2026 16:36:20 +0000 (06:36 -1000)]
Merge tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
* tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness
drm/rockchip: dw_hdmi_qp: Switch to gpiod_set_value_cansleep()
Since commit 20cf2aed89ac ("gpio: rockchip: mark the GPIO controller as
sleeping"), the Rockchip GPIO chip operations potentially sleep, hence
the kernel complains when trying to make use of the non-sleeping API:
Linus Torvalds [Sun, 11 Jan 2026 01:54:41 +0000 (15:54 -1000)]
Merge tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Notable changes include a fix to close one common microarchitectural
attack vector for out-of-order cores. Another patch exposed an
omission in my boot test coverage, which is currently missing
relocatable kernels. Otherwise, the fixes seem to be settling down for
us.
- Fix CONFIG_RELOCATABLE=y boots by building Image files from
vmlinux, rather than vmlinux.unstripped, now that the .modinfo
section is included in vmlinux.unstripped
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do)
- Fix a crash in test_kprobes when building with Clang
- Fix a deadlock possible when tracing is enabled for SBI ecalls
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and
removing an unnecessary header file inclusion"
* tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: trace: fix snapshot deadlock with sbi ecall
riscv: remove irqflags.h inclusion in asm/bitops.h
riscv: cpu_ops_sbi: smp_processor_id() returns int, not unsigned int
riscv: configs: Clean up references to non-existing configs
riscv: kexec_image: Fix dead link to boot-image-header.rst
riscv: pgtable: Cleanup useless VA_USER_XXX definitions
riscv: cpufeature: Fix Zk bundled extension missing Zknh
riscv: fix KUnit test_kprobes crash when building with Clang
riscv: Sanitize syscall table indexing under speculation
riscv: boot: Always make Image from vmlinux, not vmlinux.unstripped
Linus Torvalds [Sun, 11 Jan 2026 00:57:55 +0000 (14:57 -1000)]
Merge tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fix tracing test_multiple_writes stalls when buffer_size_kb is less
than 12KB"
* tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Fix test_multiple_writes stall
Linus Torvalds [Sat, 10 Jan 2026 17:14:40 +0000 (07:14 -1000)]
Merge tag 'iommu-fixes-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iomu fixes from Joerg Roedel:
- several Kconfig-related build fixes
- fix for when gcc 8.5 on PPC refuses to inline a function from a
header file
* tag 'iommu-fixes-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommupt: Make pt_feature() always_inline
iommufd/selftest: Prevent module/builtin conflicts in kconfig
iommufd/selftest: Add missing kconfig for DMA_SHARED_BUFFER
iommupt: Fix the kunit building
Gao Xiang [Sat, 10 Jan 2026 11:47:03 +0000 (19:47 +0800)]
erofs: fix file-backed mounts no longer working on EROFS partitions
Sheng Yong reported [1] that Android APEX images didn't work with commit 072a7c7cdbea ("erofs: don't bother with s_stack_depth increasing for
now") because "EROFS-formatted APEX file images can be stored within an
EROFS-formatted Android system partition."
In response, I sent a quick fat-fingered [PATCH v3] to address the
report. Unfortunately, the updated condition was incorrect:
The condition `!sb->s_bdev` is always true for all file-backed EROFS
mounts, making the check effectively a no-op.
The real fix tested and confirmed by Sheng Yong [2] at that time was
[PATCH v3 RESEND], which correctly ensures the following EROFS^2 setup
works:
EROFS (on a block device) + EROFS (file-backed mount)
But sadly I screwed it up again by upstreaming the outdated [PATCH v3].
This patch applies the same logic as the delta between the upstream
[PATCH v3] and the real fix [PATCH v3 RESEND].
Jason Gunthorpe [Fri, 9 Jan 2026 14:29:52 +0000 (10:29 -0400)]
iommupt: Make pt_feature() always_inline
gcc 8.5 on powerpc does not automatically inline these functions even
though they evaluate to constants in key cases. Since the constant
propagation is essential for some code elimination and built-time checks
this causes a build failure:
if (pts_feature(&pts, PT_FEAT_DMA_INCOHERENT) &&
!pt_test_sw_bit_acquire(&pts,
SW_BIT_CACHE_FLUSH_DONE))
flush_writes_item(&pts);
Where pts_feature() evaluates to a constant false. Mark them as
__always_inline to force it to evaluate to a constant and trigger the code
elimination.
Fixes: 7c5b184db714 ("genpt: Generic Page Table base API") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512230720.9y9DtWIo-lkp@intel.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jason Gunthorpe [Tue, 6 Jan 2026 19:22:12 +0000 (15:22 -0400)]
iommufd/selftest: Prevent module/builtin conflicts in kconfig
The selftest now depends on the AMDv1 page table, however the selftest
kconfig itself is just an sub-option of the main IOMMUFD module kconfig.
This means it cannot be modular and so kconfig allowed a modular
IOMMU_PT_AMDV1 with a built in IOMMUFD. This causes link failures:
ld: vmlinux.o: in function `mock_domain_alloc_pgtable.isra.0':
selftest.c:(.text+0x12e8ad3): undefined reference to `pt_iommu_amdv1_init'
ld: vmlinux.o: in function `BSWAP_SHUFB_CTL':
sha1-avx2-asm.o:(.rodata+0xaa36a8): undefined reference to `pt_iommu_amdv1_read_and_clear_dirty'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f0): undefined reference to `pt_iommu_amdv1_map_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f8): undefined reference to `pt_iommu_amdv1_unmap_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa3720): undefined reference to `pt_iommu_amdv1_iova_to_phys'
Adjust the kconfig to disable IOMMUFD_TEST if IOMMU_PT_AMDV1 is incompatible.
Fixes: e93d5945ed5b ("iommufd: Change the selftest to use iommupt instead of xarray") Suggested-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512210135.freQWpxa-lkp@intel.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Tue, 6 Jan 2026 19:22:11 +0000 (15:22 -0400)]
iommufd/selftest: Add missing kconfig for DMA_SHARED_BUFFER
The test doesn't build without it, dma-buf.h does not provide stub
functions if it is not enabled. Compilation can fail with:
ERROR:root:ld: vmlinux.o: in function `iommufd_test':
(.text+0x3b1cdd): undefined reference to `dma_buf_get'
ld: (.text+0x3b1d08): undefined reference to `dma_buf_put'
ld: (.text+0x3b2105): undefined reference to `dma_buf_export'
ld: (.text+0x3b211f): undefined reference to `dma_buf_fd'
ld: (.text+0x3b2e47): undefined reference to `dma_buf_move_notify'
Add the missing select.
Fixes: d2041f1f11dd ("iommufd/selftest: Add some tests for the dmabuf flow") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jason Gunthorpe [Tue, 6 Jan 2026 19:22:10 +0000 (15:22 -0400)]
iommupt: Fix the kunit building
The kunit doesn't work since the below commit made GENERIC_PT
unselectable:
$ make ARCH=x86_64 O=build_kunit_x86_64 olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_DEBUG_GENERIC_PT=y, CONFIG_IOMMUFD_TEST=y,
CONFIG_IOMMU_PT_X86_64=y, CONFIG_GENERIC_PT=y, CONFIG_IOMMU_PT_AMDV1=y,
CONFIG_IOMMU_PT_VTDSS=y, CONFIG_IOMMU_PT=y, CONFIG_IOMMU_PT_KUNIT_TEST=y
Also remove the unneeded CONFIG_IOMMUFD_TEST reference as the iommupt kunit
doesn't interact with iommufd, and it doesn't currently build for the
kunit due problems with DMA_SHARED buffer either.
Fixes: 01569c216dde ("genpt: Make GENERIC_PT invisible") Fixes: 1dd4187f53c3 ("iommupt: Add a kunit test for Generic Page Table") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Linus Torvalds [Sat, 10 Jan 2026 05:34:50 +0000 (19:34 -1000)]
Merge tag 'erofs-for-6.19-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
- Don't increase s_stack_depth which caused regressions in some
composefs mount setups (EROFS + ovl^2)
Instead just allow one extra unaccounted fs stacking level for
straightforward cases.
* tag 'erofs-for-6.19-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: don't bother with s_stack_depth increasing for now
Gao Xiang [Thu, 8 Jan 2026 02:38:31 +0000 (10:38 +0800)]
erofs: don't bother with s_stack_depth increasing for now
Previously, commit d53cd891f0e4 ("erofs: limit the level of fs stacking
for file-backed mounts") bumped `s_stack_depth` by one to avoid kernel
stack overflow when stacking an unlimited number of EROFS on top of
each other.
This fix breaks composefs mounts, which need EROFS+ovl^2 sometimes
(and such setups are already used in production for quite a long time).
One way to fix this regression is to bump FILESYSTEM_MAX_STACK_DEPTH
from 2 to 3, but proving that this is safe in general is a high bar.
After a long discussion on GitHub issues [1] about possible solutions,
one conclusion is that there is no need to support nesting file-backed
EROFS mounts on stacked filesystems, because there is always the option
to use loopback devices as a fallback.
As a quick fix for the composefs regression for this cycle, instead of
bumping `s_stack_depth` for file backed EROFS mounts, we disallow
nesting file-backed EROFS over EROFS and over filesystems with
`s_stack_depth` > 0.
This works for all known file-backed mount use cases (composefs,
containerd, and Android APEX for some Android vendors), and the fix is
self-contained.
Essentially, we are allowing one extra unaccounted fs stacking level of
EROFS below stacking filesystems, but EROFS can only be used in the read
path (i.e. overlayfs lower layers), which typically has much lower stack
usage than the write path.
We can consider increasing FILESYSTEM_MAX_STACK_DEPTH later, after more
stack usage analysis or using alternative approaches, such as splitting
the `s_stack_depth` limitation according to different combinations of
stacking.
Linus Torvalds [Sat, 10 Jan 2026 01:42:46 +0000 (15:42 -1000)]
Merge tag 'block-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Kill unlikely checks for blk-rq-qos. These checks are really
all-or-nothing, either the branch is taken all the time, or it's not.
Depending on the configuration, either one of those cases may be
true. Just remove the annotation
- Fix for merging bios with different app tags set
- Fix for a recently introduced slowdown due to RCU synchronization
- Fix for a status change on loop while it's in use, and then a later
fix for that fix
- Fix for the async partition scanning in ublk
* tag 'block-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
ublk: fix use-after-free in ublk_partition_scan_work
blk-mq: avoid stall during boot due to synchronize_rcu_expedited
loop: add missing bd_abort_claiming in loop_set_status
block: don't merge bios with different app_tags
blk-rq-qos: Remove unlikely() hints from QoS checks
loop: don't change loop device under exclusive opener in loop_set_status
Linus Torvalds [Sat, 10 Jan 2026 01:21:15 +0000 (15:21 -1000)]
Merge tag 'io_uring-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
"A single fix for a regression introduced in 6.15, where a failure to
wake up idle io-wq workers at ring exit will wait for the timeout to
expire.
This isn't normally noticeable, as the exit is async.
But if a parent task created a thread that sets up a ring and uses
requests that cause io-wq threads to be created, and the parent task
then waits for the thread to exit, then it can take 5 seconds for that
pthread_join() to succeed as the child thread is waiting for its
children to exit.
On top of that, just a basic cleanup as well"
* tag 'io_uring-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/io-wq: remove io_wq_for_each_worker() return value
io_uring/io-wq: fix incorrect io_wq_for_each_worker() termination logic
Linus Torvalds [Sat, 10 Jan 2026 01:17:48 +0000 (15:17 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not return false if !preemptible() in current_in_efi(). EFI
runtime services can now run with preemption enabled
- Fix uninitialised variable in the arm MPAM driver, reported by sparse
- Fix partial kasan_reset_tag() use in change_memory_common() when
calculating page indices or comparing ranges
- Save/restore TCR2_EL1 during suspend/resume, otherwise the E0POE bit
is lost
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix cleared E0POE bit after cpu_suspend()/resume()
arm64: mm: Fix incomplete tag reset in change_memory_common()
arm_mpam: Stop using uninitialized variables in __ris_msmon_read()
arm64/efi: Don't fail check current_in_efi() if preemptible
Linus Torvalds [Sat, 10 Jan 2026 01:05:19 +0000 (15:05 -1000)]
Merge tag 'ceph-for-6.19-rc5' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A bunch of libceph fixes split evenly between memory safety and
implementation correctness issues (all marked for stable) and a change
in maintainers for CephFS: Slava and Alex have formally taken over
Xiubo's role"
* tag 'ceph-for-6.19-rc5' of https://github.com/ceph/ceph-client:
libceph: make calc_target() set t->paused, not just clear it
libceph: reset sparse-read state in osd_fault()
libceph: return the handler error from mon_handle_auth_done()
libceph: make free_choose_arg_map() resilient to partial allocation
ceph: update co-maintainers list in MAINTAINERS
libceph: replace overzealous BUG_ON in osdmap_apply_incremental()
libceph: prevent potential out-of-bounds reads in handle_auth_done()
Fushuai Wang [Fri, 9 Jan 2026 03:36:20 +0000 (11:36 +0800)]
selftests/tracing: Fix test_multiple_writes stall
When /sys/kernel/tracing/buffer_size_kb is less than 12KB,
the test_multiple_writes test will stall and wait for more
input due to insufficient buffer space.
Check current buffer_size_kb value before the test. If it is
less than 12KB, it temporarily increase the buffer to 12KB,
and restore the original value after the tests are completed.
Link: https://lore.kernel.org/r/20260109033620.25727-1-fushuai.wang@linux.dev Fixes: 37f46601383a ("selftests/tracing: Add basic test for trace_marker_raw file") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
drm/dp: Add byte-by-byte fallback for broken USB-C adapters
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Linus Torvalds [Fri, 9 Jan 2026 17:02:38 +0000 (07:02 -1000)]
Merge tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential NULL pointer dereference when replaying tree log after
an error
- release path before initializing extent tree to avoid potential
deadlock when allocating new inode
- on filesystems with block size > page size
- fix potential read out of bounds during encoded read of an inline
extent
- only enforce free space tree if v1 cache is required
- print correct tree id in error message
* tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: show correct warning if can't read data reloc tree
btrfs: fix NULL pointer dereference in do_abort_log_replay()
btrfs: force free space tree for bs > ps cases
btrfs: only enforce free space tree if v1 cache is required for bs < ps cases
btrfs: release path before initializing extent tree in btrfs_read_locked_inode()
btrfs: avoid access-beyond-folio for bs > ps encoded writes
Linus Torvalds [Fri, 9 Jan 2026 16:41:10 +0000 (06:41 -1000)]
Merge tag 'pci-v6.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Remove ASPM L0s support for MSM8996 SoC since we now enable L0s when
advertised, and it caused random hangs on this device (Manivannan
Sadhasivam)
- Fix meson-pcie to report that the link is up while in ASPM L0s or L1,
since those are active states from the software point of view, and
treating the link as down caused config access failures (Bjorn
Helgaas)
- Fix up sparc DTS BAR descriptions that are above 4GB but not marked
as prefetchable, which caused resource assignment and driver probe
failures after we converted from the SPARC pcibios_enable_device() to
the generic version (Ilpo Järvinen)
* tag 'pci-v6.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
sparc/PCI: Correct 64-bit non-pref -> pref BAR resources
PCI: meson: Report that link is up while in ASPM L0s and L1 states
PCI: qcom: Remove ASPM L0s support for MSM8996 SoC
Linus Torvalds [Fri, 9 Jan 2026 16:20:15 +0000 (06:20 -1000)]
Merge tag 'acpi-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"This fixes the ACPI/PCI legacy interrupts (INTx) parsing in the case
when the ACPI Global System Interrupt (GSI) value is a 32-bit one with
the MSB set.
That was interpreted as a negative integer and caused
acpi_pci_link_allocate_irq() to fail and acpi_irq_get_penalty() to
trigger an out-of-bounds array dereference (Lorenzo Pieralisi)"
* tag 'acpi-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCI: IRQ: Fix INTx GSIs signedness
Linus Torvalds [Fri, 9 Jan 2026 16:18:05 +0000 (06:18 -1000)]
Merge tag 'pm-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes a crash in the hibernation image saving code that can be
triggered when the given compression algorithm is unavailable (Malaya
Kumar Rout)"
* tag 'pm-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix crash when freeing invalid crypto compressor
Linus Torvalds [Fri, 9 Jan 2026 16:10:22 +0000 (06:10 -1000)]
Merge tag 'gpio-fixes-for-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There are several ordinary driver fixes and a fix to a race between
the registration of two chips that causes a crash in GPIO core.
The bulk of the changed lines however, concerns the management of
shared GPIOs that landed in v6.19-rc1. Enabling it for ARCH_QCOM
enabled it in defconfig which effectively enabled it for all arm64
platforms and exposed the code to quite a lot of testing (which is
good, right? :)).
As a resukt, I received a number of bug reports, which I progressively
fixed over the course of last weeks. This explains the number of lines
higher than what I normally aim for at this stage.
- balance superio enter/exit calls in error path in gpio-it87
- fix a race where we try to take the SRCU read lock of the GPIO
device before it's been initialized causing a NULL-pointer
dereference
- fix handling of short-pulse interrupts in gpio-pca053x
- fix a reference leak in error path in gpio-mpsse
- mark the GPIO controller as sleeping (it calls sleeping functions)
in gpio-rockchip
- fix several issues in management of shared GPIOs"
* tag 'gpio-fixes-for-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: fix a false-positive sharing detection with reset-gpios
gpiolib: fix lookup table matching
gpio: shared: don't allocate the lookup table until we really need it
gpio: shared: fix a race condition
gpio: shared: assign the correct firmware node for reset-gpio use-case
gpio: rockchip: mark the GPIO controller as sleeping
gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths
gpio: pca953x: handle short interrupt pulses on PCAL devices
gpiolib: fix race condition for gdev->srcu
gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib
gpio: shared: verify con_id when adding proxy lookup
gpiolib: allow multiple lookup tables per consumer
gpio: it87: balance superio enter/exit calls in error path
Linus Torvalds [Fri, 9 Jan 2026 16:04:05 +0000 (06:04 -1000)]
Merge tag 'drm-fixes-2026-01-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"I missed the drm-rust fixes tree for last week, so this catches up on
that, along with amdgpu, and then some misc fixes across a few
drivers. I hadn't got an xe pull by the time I sent this, I suspect
one will arrive 10 mins after, but I don't think there is anything
that can't wait for next week.
Things seem to have picked up a little with people coming back from
holidays,
MAINTAINERS:
- Fix Nova GPU driver git links
- Fix typo in TYR driver entry preventing correct behavior of
scripts/get_maintainer.pl
- Exclude TYR driver from DRM MISC
nova-core:
- Correctly select RUST_FW_LOADER_ABSTRACTIONS to prevent build
errors
- Regenerate nova-core bindgen bindings with '--explicit-padding' to
avoid uninitialized bytes
- Fix length of received GSP messages, due to miscalculated message
payload size
- Regenerate bindings to derive MaybeZeroable
- Use a bindings alias to derive the firmware version
exynos:
- hdmi: replace system_wq with system_percpu_wq
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and
post-disable operations, as it breaks other bridge drivers
nouveau:
- Fix regression from fwsec s/r fix
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
amdgpu:
- Clang fixes
- Navi1x PCIe DPM fixes
- Ring reset fixes
- ISP suspend fix
- Analog DC fixes
- VPE fixes
- Mode1 reset fix
radeon:
- Variable sized array fix"
* tag 'drm-fixes-2026-01-09' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
Reapply "Revert "drm/amd: Skip power ungate during suspend for VPE""
drm/amd/display: Check NULL before calling dac_load_detection
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
drm/exynos: hdmi: replace use of system_wq with system_percpu_wq
drm/fb-helper: Fix vblank timeout during suspend/reset
PCI/VGA: Don't assume the only VGA device on a system is `boot_vga`
drm/amdgpu: Fix query for VPE block_type and ip_count
drm/amd/display: Add missing encoder setup to DACnEncoderControl
drm/amd/display: Correct color depth for SelectCRTC_Source
drm/amd/amdgpu: Fix SMU warning during isp suspend-resume
drm/amdgpu: always backup and reemit fences
drm/amdgpu: don't reemit ring contents more than once
drm/amd/pm: force send pcie parmater on navi1x
drm/amd/pm: fix wrong pcie parameter on navi1x
drm/radeon: Remove __counted_by from ClockInfoArray.clockInfo[]
drm/amd/display: Reduce number of arguments of dcn30's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dcn30's CalculatePrefetchSchedule()
drm/amd/display: Apply e4479aecf658 to dml
nouveau: don't attempt fwsec on sb on newer platforms
drm/tidss: Fix enable/disable order
...
Linus Torvalds [Fri, 9 Jan 2026 15:57:57 +0000 (05:57 -1000)]
Merge tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
Anup Patel [Tue, 23 Dec 2025 14:35:44 +0000 (20:05 +0530)]
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
The __alloc_percpu() fails when the number of IDs are greater than 959
because size parameter of __alloc_percpu() must be less than 32768 (aka
PCPU_MIN_UNIT_SIZE). This failure is observed with KVMTOOL when AIA is
trap-n-emulated by in-kernel KVM because in this case KVM guest has 2047
interrupt IDs.
To address this issue, don't embed vector array in struct imsic_local_priv
until __alloc_percpu() support size parameter greater than 32768.
This reverts commit 79eaabc61dfb ("irqchip/riscv-imsic: Embed the vector
array in lpriv").
Ming Lei [Fri, 9 Jan 2026 12:14:54 +0000 (20:14 +0800)]
ublk: fix use-after-free in ublk_partition_scan_work
A race condition exists between the async partition scan work and device
teardown that can lead to a use-after-free of ub->ub_disk:
1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk()
2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does:
- del_gendisk(ub->ub_disk)
- ublk_detach_disk() sets ub->ub_disk = NULL
- put_disk() which may free the disk
3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk
leading to UAF
Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold
a reference to the disk during the partition scan. The spinlock in
ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker
either gets a valid reference or sees NULL and exits early.
Also change flush_work() to cancel_work_sync() to avoid running the
partition scan work unnecessarily when the disk is already detached.
Fixes: 7fc4da6a304b ("ublk: scan partition in async way") Reported-by: Ruikai Peng <ruikai@pwno.io> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cong Wang [Tue, 23 Dec 2025 21:51:13 +0000 (13:51 -0800)]
sched/mm_cid: Prevent NULL mm dereference in sched_mm_cid_after_execve()
sched_mm_cid_after_execve() is called in bprm_execve()'s cleanup path even
when exec_binprm() fails. For the init task's first execve(), this causes a
problem:
1. current->mm is NULL (kernel threads don't have an mm)
2. sched_mm_cid_before_execve() exits early because mm is NULL
3. exec_binprm() fails (e.g., ENOENT for missing script interpreter)
4. sched_mm_cid_after_execve() is called with mm still NULL
5. sched_mm_cid_fork() is called unconditionally, triggering WARN_ON
This is easily reproduced by booting with an init that is a shell script
(#!/bin/sh) where the interpreter doesn't exist in the initramfs.
Fix this by checking if t->mm is NULL before calling sched_mm_cid_fork(),
matching the behavior of sched_mm_cid_before_execve() which already
handles this case via sched_mm_cid_exit()'s early return.
Fixes: b0c3d51b54f8 ("sched/mmcid: Provide precomputed maximal value") Signed-off-by: Cong Wang <cwang@multikernel.io> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20251223215113.639686-1-xiyou.wangcong@gmail.com
Yeoreum Yun [Wed, 7 Jan 2026 16:21:15 +0000 (16:21 +0000)]
arm64: Fix cleared E0POE bit after cpu_suspend()/resume()
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes: bf83dae90fbc ("arm64: enable the Permission Overlay Extension for EL0") Cc: <stable@vger.kernel.org> # 6.12.x Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
gpio: shared: fix a false-positive sharing detection with reset-gpios
After scanning the devicetree, we remove all entries that have only one
reference, while creating GPIO shared proxies for the remaining, shared
entries. However: for the reset-gpio corner-case, we will have two
references for a "reset-gpios" pin that's not really shared. In this
case one will come from the actual consumer fwnode and the other from
the potential auxiliary reset-gpio device. This causes the GPIO core to
create unnecessary GPIO shared proxy devices for pins that are not
really shared.
Add a function that can detect this situation and remove entries that
have exactly two references but one of them is a reset-gpio.
Linus Torvalds [Fri, 9 Jan 2026 02:38:19 +0000 (16:38 -1000)]
Merge tag 'pinctrl-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the mt8189 register base name order back from being fixed broken
- Add REGMAP_MMIO to the pic64gx-gpio2 to avoid build breakages
- Mark the Qualcomm lpass-lpi pin controller GPIO chip instance as
sleeping to fix lock splats
- Update .mailmap with my new kernel.org address for all old mails
after maintainers ran into issues with this
* tag 'pinctrl-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping
pinctrl: pic64gx-gpio2: Add REGMAP_MMIO dependency
Update .mailmap for Linus Walleij
pinctrl: mediatek: mt8189: restore previous register base name array order
Jiayuan Chen [Sun, 4 Jan 2026 12:35:27 +0000 (20:35 +0800)]
arm64: mm: Fix incomplete tag reset in change_memory_common()
Running KASAN KUnit tests with {HW,SW}_TAGS mode triggers a fault in
change_memory_common():
Call trace:
change_memory_common+0x168/0x210 (P)
set_memory_ro+0x20/0x48
vmalloc_helpers_tags+0xe8/0x338
kunit_try_run_case+0x74/0x188
kunit_generic_run_threadfn_adapter+0x30/0x70
kthread+0x11c/0x200
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
# vmalloc_helpers_tags: try faulted
not ok 67 vmalloc_helpers_tags
Commit a06494adb7ef ("arm64: mm: use untagged address to calculate page index")
fixed a KASAN warning in the BPF subsystem by adding kasan_reset_tag() to
the index calculation. In the execmem flow:
The returned address from execmem_vmalloc/execmem_cache_alloc is passed
through kasan_reset_tag(), so start has no tag while area->addr still
retains the original tag. The fix correctly handled this case by resetting
the tag on area->addr:
However, in normal vmalloc paths, both start and area->addr have matching
tags(or no tags). Resetting only area->addr causes a mismatch when
subtracting a tagged address from an untagged one, resulting in an
incorrect index.
Fix this by resetting tags on both addresses in the index calculation.
This ensures correct results regardless of the tag state of either address.
Tested with KASAN KUnit tests under CONFIG_KASAN_GENERIC,
CONFIG_KASAN_SW_TAGS, and CONFIG_KASAN_HW_TAGS - all pass. Also verified
the original BPF KASAN warning from [1] is still fixed.
Eric Biggers [Wed, 7 Jan 2026 05:20:23 +0000 (21:20 -0800)]
lib/crypto: aes: Fix missing MMU protection for AES S-box
__cacheline_aligned puts the data in the ".data..cacheline_aligned"
section, which isn't marked read-only i.e. it doesn't receive MMU
protection. Replace it with ____cacheline_aligned which does the right
thing and just aligns the data while keeping it in ".rodata".
Fixes: b5e0b032b6c3 ("crypto: aes - add generic time invariant AES cipher") Cc: stable@vger.kernel.org Reported-by: Qingfang Deng <dqfext@gmail.com> Closes: https://lore.kernel.org/r/20260105074712.498-1-dqfext@gmail.com/ Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20260107052023.174620-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org>
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
On my development machine the generic, memcpy()-only implementation of
polyval_preparekey() is too fast for the IRQ workers to actually fire.
The test fails.
Increase the iterations to make the test more robust.
The test will run for a maximum of one second in any case.
[EB: This failure was already fixed by commit c31f4aa8fed0 ("kunit:
Enforce task execution in {soft,hard}irq contexts"). I'm still applying
this patch too, since the iteration count in this test made its running
time much shorter than the other similar ones.]
Ben Horgan [Fri, 19 Dec 2025 18:11:03 +0000 (18:11 +0000)]
arm_mpam: Stop using uninitialized variables in __ris_msmon_read()
Dan has reported two uses of uninitialized variables in __ris_msmon_read().
If an unknown monitor type is encountered then the local variable, now, is
used uninitialized. Fix this by returning early on error. If a non-mbwu
monitor is being read then the local variable, overflow, is not initialized
but still read. Initialize it to false as overflow is not relevant for csu
monitors.
Fixes: 823e7c3712c5 ("arm_mpam: Add mpam_msmon_read() to read monitor value") Fixes: 9e5afb7c3283 ("arm_mpam: Use long MBWU counters if supported") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202512091519.RBwiJcSq-lkp@intel.com/ Closes: https://lore.kernel.org/r/202512100547.N7QPYgfb-lkp@intel.com/ Signed-off-by: Ben Horgan <ben.horgan@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 8 Jan 2026 18:47:05 +0000 (08:47 -1000)]
Merge tag 'trace-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove useless assignment of soft_mode variable
The function __ftrace_event_enable_disable() sets "soft_mode" in one
of the branch paths but doesn't use it after that. Remove the setting
of that variable.
- Add a cond_resched() in ring_buffer_resize()
The resize function that allocates all the pages for the ring buffer
was causing a soft lockup on PREEMPT_NONE configs when allocating
large buffers on machines with many CPUs. Hopefully this is the last
cond_resched() needed to be added as PREEMPT_LAZY becomes the norm in
the future.
- Make ftrace_graph_ent depth field signed
The "depth" field of struct ftrace_graph_ent was converted from "int"
to "unsigned long" for alignment reasons to work with being embedded
in other structures. The conversion from a signed to unsigned caused
integrity checks to always pass as they were comparing "depth" to
less than zero. Make the field signed long.
- Add recursion protection to stack trace events
A infinite recursion was triggered by a stack trace event calling RCU
which internally called rcu_read_unlock_special(), which triggered an
event that was also doing stacktraces which cause it to trigger the
same RCU lock that called rcu_read_unlock_special() again.
Update the trace_test_and_set_recursion() to add a set of context
checks for events to use, and have the stack trace event use that for
recursion protection.
- Make the variable ftrace_dump_on_oops static
The cleanup of sysctl that moved all the updates to the files that
use them moved the reference of ftrace_dump_on_oops to where it is
used. It is no longer used outside of the trace.c file. Make it
static.
* tag 'trace-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace: ftrace_dump_on_oops[] is not exported, make it static
tracing: Add recursion protection in kernel stack trace recording
ftrace: Make ftrace_graph_ent depth field signed
ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free
tracing: Drop unneeded assignment to soft_mode
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
Jakub Kicinski [Thu, 8 Jan 2026 16:54:54 +0000 (08:54 -0800)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-06 (idpf)
This series contains updates to idpf driver only.
Emil fixes issues related to resets; among them timeouts, NULL pointer
dereferences, and memory leaks.
Sreedevi resolves issues around RSS; mainly involving operations when
the interface is down and resets. She also addresses some incomplete
cleanups for ntuple filters and interrupts.
Erik fixes incomplete output of ntuple filters.
Josh sets restriction of Rx buffer size to follow hardware restrictions.
Larysa adds check to prevent NULL pointer dereference when RDMA is not
enabled.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix aux device unplugging when rdma is not supported by vport
idpf: cap maximum Rx buffer size
idpf: Fix error handling in idpf_vport_open()
idpf: Fix RSS LUT NULL ptr issue after soft reset
idpf: Fix RSS LUT configuration on down interfaces
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
idpf: fix issue with ethtool -n command display
idpf: fix memory leak of flow steer list on rmmod
idpf: fix error handling in the init_task on load
idpf: fix memory leak in idpf_vc_core_deinit()
idpf: fix memory leak in idpf_vport_rel()
idpf: detach and close netdevs while handling a reset
idpf: keep the netdev when a reset fails
====================
Wei Fang [Wed, 7 Jan 2026 09:12:04 +0000 (17:12 +0800)]
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/ Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Jan 2026 16:49:24 +0000 (08:49 -0800)]
Merge tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Jakub Kicinski [Tue, 6 Jan 2026 16:34:26 +0000 (08:34 -0800)]
tools: ynl: don't install tests
make's install target is meant for installing the production
artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool
from under the main YNL install target. The install target
under tests/ is retained in case someone wants the tests
to be installed.
Fixes: 308b7dee3e5c ("tools: ynl: add YNL test framework") Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e4a ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7e8 ("net: af_unix:
implement splice for stream af_unix sockets").
projects / thirdparty / kernel / linux.git / log
