David S. Miller [Mon, 3 Jun 2024 12:06:16 +0000 (13:06 +0100)]
Merge branch 'Felix-DSA-probing-cleanup'
Vladimir Oltean says:
====================
Probing cleanup for the Felix DSA driver
This is a follow-up to Russell King's request for code consolidation
among felix_vsc9959, seville_vsc9953 and ocelot_ext, stated here:
https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Details are in individual patches. Testing was done on NXP LS1028A
(felix_vsc9959).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:33 +0000 (19:33 +0300)]
net: dsa: ocelot: unexport felix_phylink_mac_ops and felix_switch_ops
Now that the common felix_register_switch() from the umbrella driver
is the only entity that accesses these data structures, we can remove
them from the list of the exported symbols.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:32 +0000 (19:33 +0300)]
net: dsa: ocelot: common probing code
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init code, which could be
made common [1].
Here, we take the following common steps:
- "felix" and "ds" structure allocation
- "felix", "ocelot" and "ds" basic structure initialization
- dsa_register_switch() call
and we make a common function out of them.
For every driver except felix_vsc9959, this is also the entire probing
procedure. For felix_vsc9959, we also need to do some PCI-specific
stuff, which can easily be reordered to be done before, and unwound on
failure.
We also have to convert the bus-specific platform_set_drvdata() and
pci_set_drvdata() calls into dev_set_drvdata(). But this should have no
impact on the behavior.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:31 +0000 (19:33 +0300)]
net: dsa: ocelot: use ds->num_tx_queues = OCELOT_NUM_TC for all models
Russell King points out that seville_vsc9953 populates
felix->info->num_tx_queues = 8, but this doesn't make it all the way
into ds->num_tx_queues (which is how the user interface netdev queues
get allocated) [1].
When num_tx_queues=0 for seville, this is implicitly converted to 1 by
dsa_user_create(), and this is good enough for basic operation for a
switch port. The tc qdisc offload layer works with netdev TX queues,
so for QoS offload we need to pretend we have multiple TX queues. The
VSC9953, like ocelot_ext, doesn't export QoS offload, so it doesn't
really matter. But we can definitely set num_tx_queues=8 for all
switches.
The felix->info->num_tx_queues construct itself seems unnecessary.
It was introduced by commit de143c0e274b ("net: dsa: felix: Configure
Time-Aware Scheduler via taprio offload") at a time when vsc9959
(LS1028A) was the only switch supported by the driver.
8 traffic classes, and 1 queue per traffic class, is a common
architectural feature of all switches in the family. So they could
all just set OCELOT_NUM_TC and be fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:30 +0000 (19:33 +0300)]
net: dsa: ocelot: move devm_request_threaded_irq() to felix_setup()
The current placement of devm_request_threaded_irq() is inconvenient.
It is between the allocation of the "felix" structure and
dsa_register_switch(), both of which we'd like to refactor into a
function that's common for all switches. But the IRQ is specific to
felix_vsc9959.
A closer inspection of the felix_irq_handler() code suggests that
it does things that depend on the data structures having been fully
initialized. For example, ocelot_get_txtstamp() takes
&port->tx_skbs.lock, which has only been initialized in
ocelot_init_port() which has not run yet.
It is not one of those IRQF_SHARED IRQs, so CONFIG_DEBUG_SHIRQ_FIXME
shouldn't apply here, and thus, it doesn't really matter, because in
practice, the IRQ will not be triggered so early. Nonetheless, it is a
good practice for the driver to be prepared for it to fire as soon as it
is requested.
Create a new felix->info method for running custom code for vsc9959 from
within felix_setup(), and move the request_irq() call there. The
ocelot_ext should have an IRQ as well, so this should be a step in the
right direction for that model (VSC7512) as well.
Some minor changes are made while moving the code. Casts from void *
aren't necessary, so drop them, and rename felix_irq_handler() to the
more specific vsc9959_irq_handler().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:29 +0000 (19:33 +0300)]
net: dsa: ocelot: consistently use devres in felix_pci_probe()
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
Prepare the ground in the felix_vsc9959 driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:27 +0000 (19:33 +0300)]
net: dsa: ocelot: use devres in seville_probe()
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
Prepare the ground in the seville_vsc9953 driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 30 May 2024 16:33:26 +0000 (19:33 +0300)]
net: dsa: ocelot: use devres in ocelot_ext_probe()
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
Prepare the ground in the ocelot_ext driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Jun 2024 11:12:42 +0000 (12:12 +0100)]
Merge branch 'net-smc-snd_buf-rcv_buf'
Guangguan Wang says:
====================
net/smc: Change the upper boundary of SMC-R's snd_buf and rcv_buf to 512MB
SMCR_RMBE_SIZES is the upper boundary of SMC-R's snd_buf and rcv_buf.
The maximum bytes of snd_buf and rcv_buf can be calculated by 2^SMCR_
RMBE_SIZES * 16KB. SMCR_RMBE_SIZES = 5 means the upper boundary is 512KB.
TCP's snd_buf and rcv_buf max size is configured by net.ipv4.tcp_w/rmem[2]
whose default value is 4MB or 6MB, is much larger than SMC-R's upper
boundary.
In some scenarios, such as Recommendation System, the communication
pattern is mainly large size send/recv, where the size of snd_buf and
rcv_buf greatly affects performance. Due to the upper boundary
disadvantage, SMC-R performs poor than TCP in those scenarios. So it
is time to enlarge the upper boundary size of SMC-R's snd_buf and rcv_buf,
so that the SMC-R's snd_buf and rcv_buf can be configured to larger size
for performance gain in such scenarios.
The SMC-R rcv_buf's size will be transferred to peer by the field
rmbe_size in clc accept and confirm message. The length of the field
rmbe_size is four bits, which means the maximum value of SMCR_RMBE_SIZES
is 15. In case of frequently adjusting the value of SMCR_RMBE_SIZES
in different scenarios, set the value of SMCR_RMBE_SIZES to the maximum
value 15, which means the upper boundary of SMC-R's snd_buf and rcv_buf
is 512MB. As the real memory usage is determined by the value of
net.smc.w/rmem, not by the upper boundary, set the value of SMCR_RMBE_SIZES
to the maximum value has no side affects.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Mon, 3 Jun 2024 03:00:19 +0000 (11:00 +0800)]
net/smc: change SMCR_RMBE_SIZES from 5 to 15
SMCR_RMBE_SIZES is the upper boundary of SMC-R's snd_buf and rcv_buf.
The maximum bytes of snd_buf and rcv_buf can be calculated by 2^SMCR_
RMBE_SIZES * 16KB. SMCR_RMBE_SIZES = 5 means the upper boundary is 512KB.
TCP's snd_buf and rcv_buf max size is configured by net.ipv4.tcp_w/rmem[2]
whose default value is 4MB or 6MB, is much larger than SMC-R's upper
boundary.
In some scenarios, such as Recommendation System, the communication
pattern is mainly large size send/recv, where the size of snd_buf and
rcv_buf greatly affects performance. Due to the upper boundary
disadvantage, SMC-R performs poor than TCP in those scenarios. So it
is time to enlarge the upper boundary size of SMC-R's snd_buf and rcv_buf,
so that the SMC-R's snd_buf and rcv_buf can be configured to larger size
for performance gain in such scenarios.
The SMC-R rcv_buf's size will be transferred to peer by the field
rmbe_size in clc accept and confirm message. The length of the field
rmbe_size is four bits, which means the maximum value of SMCR_RMBE_SIZES
is 15. In case of frequently adjusting the value of SMCR_RMBE_SIZES
in different scenarios, set the value of SMCR_RMBE_SIZES to the maximum
value 15, which means the upper boundary of SMC-R's snd_buf and rcv_buf
is 512MB. As the real memory usage is determined by the value of
net.smc.w/rmem, not by the upper boundary, set the value of SMCR_RMBE_SIZES
to the maximum value has no side affects.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Co-developed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Mon, 3 Jun 2024 03:00:18 +0000 (11:00 +0800)]
net/smc: set rmb's SG_MAX_SINGLE_ALLOC limitation only when CONFIG_ARCH_NO_SG_CHAIN is defined
SG_MAX_SINGLE_ALLOC is used to limit maximum number of entries that
will be allocated in one piece of scatterlist. When the entries of
scatterlist exceeds SG_MAX_SINGLE_ALLOC, sg chain will be used. From
commit 7c703e54cc71 ("arch: switch the default on ARCH_HAS_SG_CHAIN"),
we can know that the macro CONFIG_ARCH_NO_SG_CHAIN is used to identify
whether sg chain is supported. So, SMC-R's rmb buffer should be limited
by SG_MAX_SINGLE_ALLOC only when the macro CONFIG_ARCH_NO_SG_CHAIN is
defined.
Fixes: a3fe3d01bd0d ("net/smc: introduce sg-logic for RMBs") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Co-developed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
af_unix: Remove dead code in unix_stream_read_generic().
When splice() support was added in commit 2b514574f7e8 ("net:
af_unix: implement splice for stream af_unix sockets"), we had
to release unix_sk(sk)->readlock (current iolock) before calling
splice_to_pipe().
Due to the unlock, commit 73ed5d25dce0 ("af-unix: fix use-after-free
with concurrent readers while splicing") added a safeguard in
unix_stream_read_generic(); we had to bump the skb refcount before
calling ->recv_actor() and then check if the skb was consumed by a
concurrent reader.
However, the pipe side locking was refactored, and since commit 25869262ef7a ("skb_splice_bits(): get rid of callback"), we can
call splice_to_pipe() without releasing unix_sk(sk)->iolock.
Now, the skb is always alive after the ->recv_actor() callback,
so let's remove the unnecessary drop_skb logic.
This is mostly the revert of commit 73ed5d25dce0 ("af-unix: fix
use-after-free with concurrent readers while splicing").
====================
lan78xx: Enable 125 MHz CLK and Auto Speed configuration for LAN7801 if NO EEPROM is detected
This patch series adds the support for 125 MHz clock, Auto speed and
auto duplex configuration for LAN7801 in the absence of EEPROM.
====================
Rengarajan S [Wed, 29 May 2024 14:02:56 +0000 (19:32 +0530)]
lan78xx: Enable Auto Speed and Auto Duplex configuration for LAN7801 if NO EEPROM is detected
Enabled ASD/ADD configuration for LAN7801 in the absence of EEPROM.
After the lite reset these contents go back to defaults where ASD/
ADD is disabled. The check is already available for LAN7800.
Rengarajan S [Wed, 29 May 2024 14:02:55 +0000 (19:32 +0530)]
lan78xx: Enable 125 MHz CLK configuration for LAN7801 if NO EEPROM is detected
The 125MHz and 25MHz clock configurations are enabled in the initialization
regardless of EEPROM (125MHz is needed for RGMII 1000Mbps operation). After
a lite reset (lan78xx_reset), these contents go back to defaults(all 0, so
no 125MHz or 25MHz clock).
The Cortina Gemini ethernet can very well set up TX or RX
pausing, so add this functionality to the driver in a
.set_pauseparam() callback. Essentially just call down to
phylib and let phylib deal with this, .adjust_link()
will respect the setting from phylib.
Linus Walleij [Wed, 29 May 2024 14:00:00 +0000 (16:00 +0200)]
net: ethernet: cortina: Rename adjust link callback
The callback passed to of_phy_get_and_connect() in the
Cortina Gemini driver is called "gmac_speed_set" which is
archaic, rename it to "gmac_adjust_link" following the
pattern of most other drivers.
Vadim Fedorenko [Thu, 30 May 2024 20:47:51 +0000 (13:47 -0700)]
bnxt_en: add timestamping statistics support
The ethtool_ts_stats structure was introduced earlier this year. Now
it's time to support this group of counters in more drivers.
This patch adds support to bnxt driver.
====================
ice: Introduce ETH56G PHY model for E825C products
E825C products have a different PHY model than E822, E823 and E810 products.
This PHY is ETH56G and its support is necessary to have functional PTP stack
for E825C products.
This series refactors the ice driver to add support for the new PHY model.
Karol introduces the ice_ptp_hw structure. This is used to replace some
hard-coded values relating to the PHY quad and port numbers, as well as to
hold the phy_model type.
Jacob refactors the driver code that converts between the ice_ptp_tmr_cmd
enumeration and hardware register values to better re-use logic and reduce
duplication when introducing another PHY type.
Sergey introduces functions to help enable and disable the Tx timestamp
interrupts. This makes the ice_ptp.c code more generic and encapsulates the
PHY specifics into ice_ptp_hw.c
Karol introduces helper functions to clear the valid bits for Tx and Rx
timestamps. This enables informing hardware to discard stale timestamps
after performing clock operations.
Sergey moves the Clock Generation Unit (CGU) logic out of the E822 specific
area of the ice_ptp_hw.c file as it will be re-used for other device PHY
models.
Jacob introduces a helper function for obtaining the base increment values,
moving this logic out of ice_ptp.c and into the ice_ptp_hw.c file to better
encapsulate hardware differences.
Sergey builds on these refactors to introduce the new ETH56G PHY model used
by the E825C products. This includes introducing the required helpers,
constants, and PHY model checks.
Karol simplifies the CGU logic by using anonymous structures, dropping an
unnecessary ".field" name for accessing the CGU data.
Michal Michalik updates the CGU logic to support the E825C hardware,
ensuring that the clock generation is configured properly.
Grzegorz Nitka adds support to read the NAC topology data from the device.
This is in preparation for supporting devices which combine two NACs
together, connecting all ports to the same clock source. This enables the
driver to determine if its operating on such a device, or if its operating
on the standard 1-NAC configuration.
Grzsecgorz Nitka adjusts the PTP initialization to prepare for the 2x50G
E825C devices, introducing special mapping for the PHY ports to prepare for
support of the 2-NAC devices.
With this, the ice driver is capable of handling PTP for the single-NAC
E825C devices. Complete support for the 2-NAC devices requirs some work on
how the ports connect to the clock owner. During review of this work, it
was pointed out that our existing use of auxiliary bus is disliked, and
Jiri requested that we change it. We are currently working on developing a
replacement solution for the auxiliary bus implementation and have dropped
the relevant changes out of this series. A future series will refactor the
port to clock connection, at which time we will finish the support for
2-NAC E825C devices.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Grzegorz Nitka [Tue, 28 May 2024 23:04:01 +0000 (16:04 -0700)]
ice: Adjust PTP init for 2x50G E825C devices
>From FW/HW perspective, 2 port topology in E825C devices requires
merging of 2 port mapping internally and breakout mapping externally.
As a consequence, it requires different port numbering from PTP code
perspective.
For that topology, pf_id can not be used to index PTP ports. Even if
the 2nd port is identified as port with pf_id = 1, all PHY operations
need to be performed as it was port 2. Thus, special mapping is needed
for the 2nd port.
This change adds detection of 2x50G topology and applies 'custom'
mapping on the 2nd port.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-11-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grzegorz Nitka [Tue, 28 May 2024 23:04:00 +0000 (16:04 -0700)]
ice: Add NAC Topology device capability parser
Add new device capability ICE_AQC_CAPS_NAC_TOPOLOGY which allows to
determine the mode of operation (1 or 2 NAC).
Define a new structure to store data from new capability and
corresponding parser code.
ice: Introduce ETH56G PHY model for E825C products
E825C products feature a new PHY model - ETH56G.
Introduces all necessary PHY definitions, functions etc. for ETH56G PHY,
analogous to E82X and E810 ones with addition of a few HW-specific
functionalities for ETH56G like one-step timestamping.
It ensures correct PTP initialization and operation for E825C products.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-7-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Tue, 28 May 2024 23:03:52 +0000 (16:03 -0700)]
ice: Introduce helper to get tmr_cmd_reg values
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karol Kolacinski [Tue, 28 May 2024 23:03:51 +0000 (16:03 -0700)]
ice: Introduce ice_ptp_hw struct
Create new ice_ptp_hw struct and use it for all HW and PTP-related
fields from struct ice_hw.
Replace definitions with struct fields, which values are set accordingly
to a specific device.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abhishek Chauhan [Wed, 29 May 2024 18:31:30 +0000 (11:31 -0700)]
net: validate SO_TXTIME clockid coming from userspace
Currently there are no strict checks while setting SO_TXTIME
from userspace. With the recent development in skb->tstamp_type
clockid with unsupported clocks results in warn_on_once, which causes
unnecessary aborts in some systems which enables panic on warns.
Add validation in setsockopt to support only CLOCK_REALTIME,
CLOCK_MONOTONIC and CLOCK_TAI to be set from userspace.
====================
doc: mptcp: new general doc and fixes
A general documentation about MPTCP was missing since its introduction
in v5.6. The last patch adds a new 'mptcp' page in the 'networking'
documentation.
The first patch is a fix for a missing sysctl entry introduced in v6.10
rc0, and the second one reorder the sysctl entries.
Similar to what is done in other 'sysctl' pages: it looks clearer from a
readability perspective.
This might cause troubles in the short/mid-term with the backports, but
by not putting new entries at the end, this can help to reduce conflicts
in case of backports in the long term. We don't change the information
here too often, so it looks OK to do that.
Thorsten Blum [Wed, 29 May 2024 14:39:02 +0000 (16:39 +0200)]
net: smc91x: Fix pointer types
Use void __iomem pointers as parameters for mcf_insw() and mcf_outsw()
to align with the parameter types of readw() and writew() to fix the
following warnings reported by kernel test robot:
====================
net: phylink: rearrange ovr_an_inband support
This series addresses the use of the ovr_an_inband flag, which is used
by two drivers to indicate to phylink that they wish to use inband mode
without firmware specifying inband mode.
The issue with ovr_an_inband is that it overrides not only PHY mode,
but also fixed-link mode. Both of the drivers that set this flag
contain code to detect when fixed-link mode will be used, and then
either avoid setting it or explicitly clear the flag. This is
wasteful when phylink already knows this.
Therefore, the approach taken in this patch set is to replace the
ovr_an_inband flag with a default_an_inband flag which means that
phylink defaults to MLO_AN_INBAND instead of MLO_AN_PHY, and will
allow that default to be overriden if firmware specifies a fixed-link.
This allows users of ovr_an_inband to be simplified.
What's more is this requires minimal changes in phylink to allow this
new mode of operation.
This series changes phylink, and also updates the two drivers
(fman_memac and stmmac), and then removes the unnecessary complexity
from the drivers.
This series may depend on the stmmac cleanup series I've posted
earlier - this is something I have not checked, but I currently have
these patches on top of that series.
====================
net: stmmac: dwmac-intel: remove checking for fixed link
With the new default_an_inband functionality in phylink, there is no
need to check for a fixed link when this flag is set, since a fixed
link will now override default_an_inband.
net: fman_memac: remove the now unnecessary checking for fixed-link
Since default_an_inband can be overriden by a fixed-link specification,
there is no need for memac to be checking for this before setting
default_an_inband. Remove this code and update the comment.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/E1sCJN1-00Ecr7-02@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phylink: rename ovr_an_inband to default_an_inband
Since ovr_an_inband no longer overrides every MLO_AN_xxx mode, rename
it to reflect what it now does - it changes the default mode from
MLO_AN_PHY to MLO_AN_INBAND. Fix up the two users of this.
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Test ovr_an_inband before checking for the fixed-link properties, which
will allow ovr_an_inband to be overriden by a fixed link specification.
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Rearrange phylink_parse_mode() a little so we can change how
phylink_config->ovr_an_inband works. This will allow the flag to be
tested before checking for the fixed link properties in the next patch.
dt-bindings: net: ti: icssg_prueth: Add documentation for PA_STATS support
Add documentation for ti,pa-stats property which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Jakub Kicinski [Fri, 31 May 2024 01:30:12 +0000 (18:30 -0700)]
Merge branch 'net-stmmac-cleanups'
Russell King says:
====================
net: stmmac: cleanups
This series removes various redundant items in the stmmac driver:
- the unused TBI and RTBI PCS flags
- the NULL pointer initialisations for PCS methods in dwxgmac2
- the stmmac_pcs_rane() method which is never called, and it's
associated implementations
- the redundant netif_carrier_off()s
Finally, it replaces asm/io.h with the preferred linux/io.h.
====================
net: stmmac: ethqos: clean up setting serdes speed
There are four repititions of the same sequence of code, three of which
are identical. Pull these out into a separate function to improve
readability.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErj-00EOQ9-Vh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: include linux/io.h rather than asm/io.h
Include linux/io.h instead of asm/io.h since linux/ includes are
preferred.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCEre-00EOQ3-SR@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is incorrect to call netif_carrier_off(), or in fact any driver
teardown, before unregister_netdev() has been called.
unregister_netdev() unpublishes the network device from userspace, and
takes the interface down if it was up prior to returning. Therefore,
once the call has returned, we are guaranteed that .ndo_stop() will
have been called for an interface that was up. Phylink will take the
carrier down via phylink_stop(), making any manipulation of the carrier
in the remove path unnecessary.
In the stmmac_release() path, the netif_carrier_off() call follows the
call to phylink_stop(), so this call is redundant.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErZ-00EOPx-PF@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pcs_rane() method is not called, so lets just remove this
redundant code.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErU-00EOPr-MC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove useless NULL pointer initialisations for "PCS" methods from the
dwxgmac2 code.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErP-00EOPl-IT@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Serge Semin [Wed, 29 May 2024 08:40:34 +0000 (09:40 +0100)]
net: stmmac: Drop TBI/RTBI PCS flags
First of all the flags are never set by any of the driver parts. If nobody
have them set then the respective statements will always have the same
result. Thus the statements can be simplified or even dropped with no risk
to break things.
Secondly shall any of the TBI or RTBI flag is set the MDIO-bus
registration will be bypassed. Why? It really seems weird. It's perfectly
fine to have a TBI/RTBI-capable PHY configured over the MDIO bus
interface.
Based on the notes above the TBI/RTBI PCS flags can be freely dropped thus
simplifying the driver code.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1sCErK-00EOPf-EP@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Wed, 29 May 2024 04:09:08 +0000 (12:09 +0800)]
ipv6: sr: restruct ifdefines
There are too many ifdef in IPv6 segment routing code that may cause logic
problems. like commit 160e9d275218 ("ipv6: sr: fix invalid unregister error
path"). To avoid this, the init functions are redefined for both cases. The
code could be more clear after all fidefs are removed.
Suggested-by: Simon Horman <horms@kernel.org> Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240529040908.3472952-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 29 May 2024 02:33:22 +0000 (19:33 -0700)]
net: fjes: correct TRACE_INCLUDE_PATH
A comment in define_trace.h clearly states:
TRACE_INCLUDE_PATH if the path is something other than core kernel
vvvvvvvvvvvvvv
include/trace then this macro can define the path to use. Note, the path
is relative to define_trace.h, not the file including it. Full path names
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
for out of tree modules must be used.
fjes uses path relative to itself. Which (somehow) works most of
the time. Except when the kernel tree is "nested" in another
kernel tree, and ../drivers/net/fjes actually exists. In which
case build will use the header file from the wrong directory.
I've been trying to figure out why net NIPA builder is constantly
failing for the last 5 days, with:
include/trace/../../../drivers/net/fjes/fjes_trace.h:88:17: error: ‘__assign_str’ undeclared (first use in this function)
88 | __assign_str(err, err);
| ^~~~~~~~~~~~
when the line in the tree clearly has only one "err". NIPA does
indeed have "nested" trees, because it uses git work-trees and
the tree on the "outside" is not very up to date.
Jakub Kicinski [Fri, 31 May 2024 01:10:38 +0000 (18:10 -0700)]
Merge branch 'ionic-updates-for-v6-11'
Shannon Nelson says:
====================
ionic: updates for v6.11
These are a few minor fixes for the ionic driver to clean
up a some little things that have been waiting for attention.
These were originally sent for net, but now respun for net-next.
Shannon Nelson [Wed, 29 May 2024 00:02:59 +0000 (17:02 -0700)]
ionic: fix up ionic_if.h kernel-doc issues
All the changes here are whitespace and comments, no code
or definitions changed. Not all issues were addressed, but
it is much better than it was. Mostly fixed was a lot
of "Excess union member" and ''rsvd' not described' warnings.
Brett Creeley [Wed, 29 May 2024 00:02:55 +0000 (17:02 -0700)]
ionic: Pass ionic_txq_desc to ionic_tx_tso_post
Pass the ionic_txq_desc instead of re-referencing it from the q->txq
array since the caller to ionic_tx_tso_post will always have the
current ionic_txq_desc pointer already.
Shannon Nelson [Wed, 29 May 2024 00:02:54 +0000 (17:02 -0700)]
ionic: Reset LIF device while restarting LIF
Recovery from broken states can be hard. If the LIF reset in
the fw_down path didn't work because the PCI link was broken,
the FW won't be in the right state for proper restart. We can
fire another LIF reset in the fw_up path to be sure things
are clean on restart.
Shannon Nelson [Wed, 29 May 2024 00:02:53 +0000 (17:02 -0700)]
ionic: fix potential irq name truncation
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
Arnd Bergmann [Tue, 28 May 2024 16:15:25 +0000 (18:15 +0200)]
hns3: avoid linking objects into multiple modules
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_cmd.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_rss.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_tqp_stats.o is added to multiple modules: hclge hclgevf
Change the way that hns3 is built by moving the three common files into a
separate module with exported symbols instead.
Fixes: 5f20be4e90e6 ("net: hns3: refactor hns3 makefile to support hns3_common module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528161603.2443125-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
mlx4: Add support for netdev-genl API
There are no functional changes from v5, which I mistakenly sent right
after net-next was closed (oops). This revision, however, includes
Tariq's Reviewed-by tags of the v5 in each commit message. See the
changelog below.
This series adds support to mlx4 for the netdev-genl API which makes it
much easier for users and user programs to map NAPI IDs back to
ifindexes, queues, and IRQs. This is extremely useful for a number of
use cases, including epoll-based busy poll.
In addition, this series includes a patch to generate per-queue
statistics using the netlink API, as well.
To facilitate the stats, patch 1/3 adds a field "alloc_fail" to the ring
structure. This is incremented by the driver in an appropriate place and
used in patch 3/3 as alloc_fail.
Please note: I do not have access to mlx4 hardware, but I've been
working closely with Martin Karsten from University of Waterloo (CC'd)
who has very graciously tested my patches on their mlx4 hardware (hence
his Tested-by attribution in each commit). His latest research work is
particularly interesting [1] and this series helps to support that (and
future) work.
Martin re-test v4 using Jakub's suggested tool [2] and the
stats.pkt_byte_sum and stats.qstat_by_ifindex tests passed. He also
adjusted the queue count and re-ran test to confirm it still passed even
if the queue count was modified.
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
====================
Introduce switch mode support for ICSSG driver
This series adds support for switch-mode for ICSSG driver. This series
also introduces helper APIs to configure firmware maintained FDB
(Forwarding Database) and VLAN tables. These APIs are later used by ICSSG
driver in switch mode.
Now the driver will boot by default in dual EMAC mode. When first ICSSG
interface is added to bridge driver will still be in EMAC mode. As soon as
second ICSSG interface is added to same bridge, switch-mode will be
enabled and switch firmwares will be loaded to PRU cores. The driver will
remain in dual EMAC mode if ICSSG interfaces are added to two different
bridges or if two different interfaces (One ICSSG, one other) is added to
the same bridge. We'll only enable is_switch_mode flag when two ICSSG
interfaces are added to same bridge.
We start in dual MAC mode. Let's say lan0 and lan1 are ICSSG interfaces
ip link add name br0 type bridge
ip link set lan0 master br0
At this point, we get a CHANGEUPPER event. Only one port is a member of
the bridge, so we will still be in dual MAC mode.
ip link set lan1 master br0
We get a second CHANGEUPPER event, the second interface lan1 is also ICSSG
interface so we will set the is_switch_mode flag and when interfaces are
brought up again, ICSSG switch firmwares will be loaded to PRU Cores.
There are some other cases to consider as well.
ip link add name br0 type bridge
ip link add name br1 type bridge
ip link set lan0 master br0
ip link set ppp0 master br0
Here we are adding lan0 (ICSSG) and ppp0 (non ICSSG) to same bridge, as
they both are not ICSSG, we will still be running in dual EMAC mode.
ip link set lan1 master br1
ip link set vpn0 master br1
Here we are adding lan1 (ICSSG) and vpn0 (non ICSSG) to same bridge, as
they both are not ICSSG, we will still be running in dual EMAC mode.
This is v6 of the series.
Changes from v5 to v6:
*) Removed __packed from structures in icssg_config.h file.
*) Added RB tags of Andrew Lunn <andrew@lunn.ch> to patch 2/3 and patch
3/3 of this series.
Changes from v4 to v5:
*) Rebased on 6.10-rc1.
*) Dropped the RFC tag.
Changes from v3 to v4:
*) Added RFC tag as net-next is closed now.
*) Modified the driver to remove the need of bringing interfaces up / down
for enabling / disabling switch mode. Now switch mode can be enabled
without bringig interfaces up / down as requested by Andrew Lunn
<andrew@lunn.ch>
*) Modified commit message of patch 3/3.
Changes from v2 to v3:
*) Dropped RFC tag.
*) Used ether_addr_copy() instead of manually copying mac address using
for loop in patch 1/3 as suggested by Andrew Lunn <andrew@lunn.ch>
*) Added helper API icssg_fdb_setup() in patch 1/3 to reduce code
duplication as suggested by Andrew Lunn <andrew@lunn.ch>
*) In prueth_switchdev_stp_state_set() removed BR_STATE_LEARNING as
learning without forwarding is not supported by ICSSG firmware.
*) Used ether_addr_equal() wherever possible in patch 2/3 as suggested
by Andrew Lunn <andrew@lunn.ch>
*) Fixed typo "nit: s/prueth_switchdevice_nb/prueth_switchdev_nb/" in
patch 2/3 as suggested by Simon Horman <horms@kernel.org>
*) Squashed "#include "icssg_mii_rt.h" to patch 2/3 from patch 3/3 as
suggested by Simon Horman <horms@kernel.org>
*) Rebased on latest net-next/main.
Changes from v1 to v2:
*) Removed TAPRIO support patch from this series.
*) Stopped using devlink for enabling switch-mode as suggested by Andrew L
*) Added read_poll_timeout() in patch 1 / 3 as suggested by Andrew L.
net: ti: icssg-prueth: Add support for ICSSG switch firmware
Add support for ICSSG switch firmware using existing Dual EMAC driver
with switchdev.
Limitations:
VLAN offloading is limited to 0-256 IDs.
MDB/FDB static entries are limited to 511 entries and different FDBs can
hash to same bucket and thus may not completely offloaded
Example assuming ETH1 and ETH2 as ICSSG2 interfaces:
Switch to ICSSG Switch mode:
ip link add name br0 type bridge
ip link set dev eth1 master br0
ip link set dev eth2 master br0
ip link set dev br0 up
bridge vlan add dev br0 vid 1 pvid untagged self
Going back to Dual EMAC mode:
ip link set dev br0 down
ip link set dev eth1 nomaster
ip link set dev eth2 nomaster
ip link del name br0 type bridge
By default, Dual EMAC firmware is loaded, and can be changed to switch
mode by above steps
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: ti: icssg-switch: Add switchdev based driver for ethernet switch support
ICSSG can operating in switch mode with 2 ext port and 1 host port with
VLAN/FDB/MDB and STP offloading. Add switchdev based driver to
support the same.
Driver itself will be integrated with icssg_prueth in future commits
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Wed, 29 May 2024 16:35:47 +0000 (09:35 -0700)]
netdev: add qstat for csum complete
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
The warning triggers as this:
packet_sendmsg
packet_snd //skb->sk is packet sk
__dev_queue_xmit
__dev_xmit_skb //q->enqueue is not NULL
__qdisc_run
sch_direct_xmit
dev_hard_start_xmit
ipvlan_start_xmit
ipvlan_xmit_mode_l3 //l3 mode
ipvlan_process_outbound //vepa flag
ipvlan_process_v6_outbound
ip6_local_out
__ip6_finish_output
ip6_finish_output2 //multicast packet
sk_mc_loop //sk->sk_family is AF_PACKET
Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240529095633.613103-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 30 May 2024 08:14:56 +0000 (10:14 +0200)]
Merge tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 syzbot reports that nf_reinject() could be called without
rcu_read_lock() when flushing pending packets at nfnetlink
queue removal, from Eric Dumazet.
Patch #2 flushes ipset list:set when canceling garbage collection to
reference to other lists to fix a race, from Jozsef Kadlecsik.
Patch #3 restores q-in-q matching with nft_payload by reverting f6ae9f120dad ("netfilter: nft_payload: add C-VLAN support").
Patch #4 fixes vlan mangling in skbuff when vlan offload is present
in skbuff, without this patch nft_payload corrupts packets
in this case.
Patch #5 fixes possible nul-deref in tproxy no IP address is found in
netdevice, reported by syzbot and patch from Florian Westphal.
Patch #6 removes a superfluous restriction which prevents loose fib
lookups from input and forward hooks, from Eric Garver.
My assessment is that patches #1, #2 and #5 address possible kernel
crash, anything else in this batch fixes broken features.
netfilter pull request 24-05-29
* tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
netfilter: nft_payload: restore vlan q-in-q match support
netfilter: ipset: Add list flush to cancel_gc
netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()
====================
Shay Agroskin [Tue, 28 May 2024 17:09:12 +0000 (20:09 +0300)]
net: ena: Fix redundant device NUMA node override
The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.
This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.
This series includes a variety of fixes that have been accumulating on the
Intel Wired LAN dev-queue.
Hui Wang provides a fix for suspend/resume on e1000e due to failure
to correctly setup the SMBUS in enable_ulp().
Thinh Tran provides a fix for EEH I/O suspend/resume on i40e to
ensure that I/O operations can continue after a resume. To avoid duplicate
code, the common logic is factored out of i40e_suspend and i40e_resume.
Paul Greenwalt provides a fix to correctly map the 200G PHY types to link
speeds in the ice driver.
Dave Ertman provides a fix correcting devlink parameter unregistration in
the event that the driver loads in safe mode and some of the parameters
were not registered.
====================
Dave Ertman [Tue, 28 May 2024 22:06:11 +0000 (15:06 -0700)]
ice: check for unregistering correct number of devlink params
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Greenwalt [Tue, 28 May 2024 22:06:08 +0000 (15:06 -0700)]
ice: fix 200G PHY types to link speed mapping
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thinh Tran [Tue, 28 May 2024 22:06:06 +0000 (15:06 -0700)]
i40e: Fully suspend and resume IO operations in EEH case
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thinh Tran [Tue, 28 May 2024 22:06:05 +0000 (15:06 -0700)]
i40e: factoring out i40e_suspend/i40e_resume
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover. The functions are now used
in the EEH handling for device suspend/resume callbacks.
The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hui Wang [Tue, 28 May 2024 22:06:04 +0000 (15:06 -0700)]
e1000e: move force SMBUS near the end of enable_ulp function
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):
[ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.
Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.
The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).
And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].
Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tristram Ha [Tue, 28 May 2024 21:34:26 +0000 (14:34 -0700)]
net: dsa: microchip: fix RGMII error in KSZ DSA driver
The driver should return RMII interface when XMII is running in RMII mode.
Fixes: 0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
A recent change to inet_dump_ifaddr had the function incorrectly iterate
over net rather than tgt_net, resulting in the data coming for the
incorrect network namespace.
Fixes: cdb2f80f1c10 ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by: Stéphane Graber <stgraber@stgraber.org> Closes: https://github.com/lxc/incus/issues/892 Bisected-by: Stéphane Graber <stgraber@stgraber.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by: Stéphane Graber <stgraber@stgraber.org> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240528203030.10839-1-aleksandr.mikhalitsyn@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: dsa: felix: provide own phylink MAC operations
Convert felix to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1sByYA-00EM0y-Jn@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In patch 2, by not using 'sanitize' for op docs, any formatting in the
.yaml gets passed straight through to the generated .rst which means
that basic rst (also markdown compatible) list formatting can be used in
the .yaml
====================
Donald Hunter [Tue, 28 May 2024 14:06:50 +0000 (15:06 +0100)]
doc: netlink: Don't 'sanitize' op docstrings in generated .rst
The doc strings for do/dump ops are emitted as toplevel .rst constructs
so they can be multi-line. Pass multi-line text straight through to the
.rst to retain any simple formatting from the .yaml
This fixes e.g. list formatting for the pin-get docs in dpll.yaml: