Abel Vesa [Tue, 28 Oct 2025 15:43:03 +0000 (17:43 +0200)]
usb: typec: ucsi: Set orientation_aware if UCSI version is 2.x and above
For UCSI 2.0 and above, since the orientation is part of the paylad,
set the orientation_aware by default and let the implementation specific
update_connector op override if necessary.
Kaanapali uses a single-node USB controller architecture with the Synopsys
DWC3 controller. Add this to the compatibles list to utilize the DWC3 QCOM
and DWC3 core framework.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://patch.msgid.link/20251029-knp-usb-dwc3-v3-1-6d3a72783336@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rai, Amardeep [Wed, 19 Nov 2025 14:24:17 +0000 (16:24 +0200)]
usb: xhci: Add debugfs support for xHCI Port Link Info (PORTLI) register.
Each xHCI roothub port has a Port Link Info (PORTLI) register that is
used by USB3 and eUSB2V2 ports.
USB3 ports show link error count, rx lane count, and tx lane count.
eUSB2V2 ports show Rx Data Rate (RDR) and Tx Data Rate (TDR).
Rx/Tx Data Rate is a multiple of USB2 2.0 HS 480 Mb/s data rates,
and is only valid if a eUSB2V2 device is connected (CCS=1).
0 = "USB 2.0 HS" normal HS 480 Mb/s, no eUSB2V2 in use
1 = "HS1" Assymetric eUSB2V2 where this direction runs normal 480Mb/s
2 = "HS2" 960Mb/s
...
10 = "HS10" 4.8 Gb/s, max eUSB2V2 rate
PORTLI is Reserved and preserve "RsvdP" for normal USB2 ports
Sample output of USB3 port PORTLI:
cat /sys/kernel/debug/usb/xhci/0000:00:14.0/ports/port14/portli
0x00000000 LEC=0 RLC=0 TLC=0
Niklas Neronin [Wed, 19 Nov 2025 14:24:16 +0000 (16:24 +0200)]
usb: xhci: standardize single bit-field macros
Convert single bit-field macros to simple masks. The change makes the
masks more universal. Multi bit-field macros are changed in the next
commit. After both changes, all masks in xhci-caps.h will follow the
same format. I plan to introduce this change to all xhci macros.
Bit shift operations on a 32-bit signed can be problematic on some
architectures. Instead use BIT() macro, which returns a 64-bit unsigned
value. This ensures that the shift operation is performed on an unsigned
type, which is safer and more portable across different architectures.
Using unsigned integers for bit shifts avoids issues related to sign bits
and ensures consistent behavior.
Switch from 32-bit to 64-bit?
As far as I am aware, this does not cause any issues.
Performing bitwise operations between 32 and 64 bit values, the smaller
operand is promoted to match the size of the larger one, resulting in a
64-bit operation. This promotion extends the 32-bit value to 64 bits,
by zero-padding (for unsigned).
Will the change to 64-bit slow down the xhci driver?
On a 64-bit architecture - No. On a 32-bit architecture, yes? but in my
opinion the performance decrease does not outweigh the readability and
other benefits of using BIT() macro.
Why not use FIELD_GET() and FIELD_PREP()?
While they can be used for single bit macros, I prefer to use simple
bitwise operation directly. Because, it takes less space, is less overhead
and is as clear as if using FIELD_GET() and FIELD_PREP().
Why not use test_bit() macro?
Same reason as with FIELD_GET() and FIELD_PREP().
Niklas Neronin [Wed, 19 Nov 2025 14:24:14 +0000 (16:24 +0200)]
usb: xhci: simplify Max Scratchpad buffer macros
Max Scratchpad Buffers consist of two bit-fields:
bits 25:21 - Max Scratchpad Buffers High, 5 Most significant bits
bits 27:31 - Max Scratchpad Buffers Low, 5 Least significant bits
Combined they create the Max Scratchpad Buffers value.
Add two new macros, 'HCS_MAX_SP_HI' and 'HCS_MAX_SP_LO', to separately
extract the high and low parts of the Max Scratchpad Buffers. These are
then combined using 'HCS_MAX_SCRATCHPAD' macro. This change simplifies
the code and makes it similar to other split value register macros in the
xhci driver.
The IST is represented by bits 2:0, with bit 3 indicating the unit of
measurement, Frames or Microframes. Introduce xhci_ist_microframes(),
which returns the IST value in Microframes, simplifying the code and
reducing duplication.
Improve documentation in xhci-caps.h to clarify the IST register specifics,
including the unit conversion details. These change removes the need to
explain it each time the IST values is retrieved.
Niklas Neronin [Wed, 19 Nov 2025 14:24:12 +0000 (16:24 +0200)]
usb: xhci: improve xhci-caps.h comments
No functional changes.
This patch updates comments in xhci-caps.h for better readability and
consistency. Each Capability Register bit field now includes a brief
description of its name and valid range, following a uniform comment
format across the file.
These updates are based on the xHCI specification, revision 1.2.
Bit field comment format:
/* <bit range> - <Field name>,<noteworthy information if any> */
Why print the bit range?
The bit range aids in identifying missing macros and reserved bit ranges.
Niklas Neronin [Wed, 19 Nov 2025 14:24:11 +0000 (16:24 +0200)]
usb: xhci: limit number of interrupts to 128
The xHCI driver defines only 128 interrupter register slots, yet allows up
to 2047 interrupters. According to the xHCI specification, the maximum
valid number of interrupters is 1024. These mismatches can lead to
out-of-range accesses and excessive memory use.
The Number of Interrupters (MaxIntrs) field occupies bits 18:8 of the
HCSPARAMS1 register, which can yield a value up to 2047, although the
specification limits it to 1024. Cap the value using the 'MAX_HC_INTRS'
macro.
Set 'xhci->max_intrs' to the minimum of the value reported by the
HCSPARAMS1 register and 'MAX_HC_INTRS'. The interrupter register slot
array is defined for 1024 entries, serving only as a structural template
and not increasing memory usage.
Although the xHCI specification allows up to 1024 interrupters, raising
'MAX_HC_INTRS' above 128 provides no practical benefit. The driver only
uses the primary interrupter (0), and secondary interrupters (1+) are
rarely, if ever, used in practice. No reports exist of usage beyond 128.
Therefore, I have limited it to 128.
Summary:
* Interrupter allocations are now limited to 128 from 2047.
* Interrupter Register template slots are set to 1024 from 128.
* Macro 'MAX_HC_INTRS' can be modified to set the interrupter limit.
==== Detailed interrupter explanation ====
There are two relevant components:
Interrupter array:
This holds the software interrupter structures and is allocated by the
xhci driver. The number of interrupters allocated is determined by the
HCSPARAMS1 register field, which specifies the supported interrupter
count.
Interrupter register slots:
This is a template struct used to access the hardware's runtime
registers. It is not allocated by the driver, the hardware defines and
owns this memory region, and the driver only maps it for MMIO access.
Each entry in the interrupter array points to its corresponding
interrupter register slot in the hardware region once that interrupter
is enabled.
Niklas Neronin [Wed, 19 Nov 2025 14:24:10 +0000 (16:24 +0200)]
usb: xhci: limit number of ports to 127
The xHCI driver allocates various port-related structures based on the
maximum number of ports reported by the controller. The Number of Ports
(MaxPorts) field occupies bits 31:24 of the HCSPARAMS1 register and can
represent values up to 255. However, the 'HCS_MAX_PORTS()' macro currently
reads bits 30:24, effectively limiting the maximum to 127.
Fixing the macro increases the reported port limit to 255, which in turn
increases memory usage regardless of how many ports are actually used.
To maintain compatibility and control memory consumption, set
'xhci->max_ports' to the minimum of the value read from 'HCS_MAX_PORTS()'
and 127 (MAX_HC_PORTS). This preserves the existing limit while making
the restriction explicit and easier to adjust in the future.
Summary:
* Port allocations are now limited to 127.
* HC max ports macro now correctly reads the MaxPorts value.
* Macro 'MAX_HC_PORTS' can be modified to set the port limit.
Niklas Neronin [Wed, 19 Nov 2025 14:24:09 +0000 (16:24 +0200)]
usb: xhci: simplify handling of Structural Parameters 1 values
The 32-bit read-only HCSPARAMS1 register contains the following fields:
Bits 7:0 - Number of Device Slots (MaxSlots)
Bits 18:8 - Number of Interrupters (MaxIntrs)
Bits 23:19 - Reserved
Bits 31:24 - Number of Ports (MaxPorts)
Since the register value is constant for the lifetime of the controller,
it is cached in 'xhci->hcs_params1'. However, platform drivers may
override the number of interrupters through a separate variable,
'xhci->max_interrupters', leaving only the maximum slots and ports values
still derived from the cached register.
To simplify the code and improve readability, replace 'xhci->hcs_params1'
with two dedicated 'u8' fields: 'xhci->max_slots' and 'xhci->max_ports'.
These values are initialized once and used directly instead of calling
'HCS_MAX_SLOTS()' and 'HCS_MAX_PORTS()' macros.
This change reduces code clutter without increasing memory usage.
Niklas Neronin [Wed, 19 Nov 2025 14:24:08 +0000 (16:24 +0200)]
usb: xhci: use cached HCSPARAMS1 value
The Structural Parameters 1 (HCSPARAMS1) register is read and cached in
'xhci->hcs_params1' during host controller initialization. Since this
register is read-only and its value remains constant for the lifetime of
the controller, re-reading it later is unnecessary.
Replace subsequent register reads with the cached 'xhci->hcs_params1'
value to avoid redundant MMIO access.
Niklas Neronin [Wed, 19 Nov 2025 14:24:07 +0000 (16:24 +0200)]
usb: xhci: remove unused trace operation and argument
Remove endpoint number 'ep_num' argument and memory operation from
xhci_log_ctx() trace function. These changes were added in commit 1d27fabec068 ("xhci: add xhci_address_ctx trace event") on Aug 14, 2013
and have never been used.
Niklas Neronin [Wed, 19 Nov 2025 14:24:06 +0000 (16:24 +0200)]
usb: xhci: remove deprecated TODO comment
The Device Context Base Address Array (DCBAA) contains pointers to device
contexts. These fields are 64-bit registers, capable of holding 64-bit
addresses.
When struct 'xhci_device_context_array' was introduced in commit [1],
the entries were represented as pairs of 'u32', requiring a custom helper
function to set 64-bit addresses. This was later made redundant by
commit [2], which changed the representation to a single 'u64', allowing
direct assignment.
The associated TODO comment referencing the old 32-bit representation is
no longer relevant and is removed.
Marco Crivellari [Wed, 19 Nov 2025 14:24:05 +0000 (16:24 +0200)]
usb: xhci: replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.
Michal Pecio [Wed, 19 Nov 2025 14:24:04 +0000 (16:24 +0200)]
usb: xhci: Don't unchain link TRBs on quirky HCs
Some old HCs ignore transfer ring link TRBs whose chain bit is unset.
This breaks endpoint operation and sometimes makes it execute other
ring's TDs, which may corrupt their buffers or cause unwanted device
action. We avoid this by chaining all link TRBs on affected rings.
Fix an omission which allows them to be unchained by cancelling TDs.
The patch was tested by reproducing this condition on an isochronous
endpoint (non-power-of-two TDs are sometimes split not to cross 64K)
and printing link TRBs in trb_to_noop() on good and buggy HCs.
Actual hardware malfunction is rare since it requires Missed Service
Error shortly before the unchained link TRB, at least on NEC and AMD.
I have never seen it after commit bb0ba4cb1065 ("usb: xhci: Apply the
link chain quirk on NEC isoc endpoints"), but it's Russian roulette
and I can't test all affected hosts and workloads. Fairly often MSEs
happen after cancellation because the endpoint was stopped.
Michal Pecio [Wed, 19 Nov 2025 14:24:03 +0000 (16:24 +0200)]
usb: xhci: Assume that endpoints halt as specified
xHCI 4.8.3 recommends that software should simply assume endpoints to
halt after certain events, without looking at the Endpoint Context for
confirmation, because HCs may be slow to update that.
While no cases of such "slowness" appear to be known, different problem
exists on AMD Promontory chipsets: they may halt and generate a transfer
event, but fail to ever update the Endpoint Context at all, at least not
until some command is queued and fails with Context State Error. This is
easily triggered by disconnecting D- of a full speed serial device.
Possibly similar bug in non-AMD hardware has been reported to linux-usb.
In such case, failed TD is given back without erasing from the ring and
endpoint isn't reset. If some URB is unlinked later, Stop Endpoint fails
and its handler resets the endpoint. On next submission it will restart
on the stale TD. Outcome is UAF on success, or another halt on error and
then Dequeue doesn't move and URBs are stuck. Unlinking and resubmitting
the URBs causes unlimited ring expansion if the situation repeats.
This can be solved by ignoring Endpoint Context State and trusting that
endpoints halt when required, except one known case in ancient hardware.
The check for "Already resolving halted ep" becomes redundant, because
for these completion codes we now jump to xhci_handle_halted_endpoint()
which deals with pending EP_HALTED internally.
Niklas Neronin [Wed, 19 Nov 2025 14:24:02 +0000 (16:24 +0200)]
usb: xhci: implement USB Port Register Set struct
Previously, each port's 'addr' field pointed to the base of the Host
Controller USB Port Register Set, and specific registers were accessed
using macros such as (port->addr + PORTPMSC).
This patch replaces the raw '__le32 __iomem *addr' pointer with a typed
'struct xhci_port_regs __iomem *port_reg' pointer. With this change,
individual registers can be accessed directly through the structure
fields:
Niklas Neronin [Wed, 19 Nov 2025 14:24:01 +0000 (16:24 +0200)]
usb: xhci: add USB Port Register Set struct
Introduce a new struct for the Host Controller USB Port Register Set to
enhance readability and maintainability.
The Host Controller Operational Registers (struct 'xhci_op_regs') span from
offset 0x0 to 0x3FF and consist of fixed fields. Following these fixed
fields are the Host Controller USB Port Register Sets, which are dynamic
and repeat from 1 to MaxPorts, as defined by HCSPARAMS1.
Currently, the struct 'xhci_op_regs' includes:
__le32 port_status_base; The first PORTSC
__le32 port_power_base; The first PORTPMSC
__le32 port_link_base; The first PORTLI
__le32 reserved5; The first PORTHLPMC, not reserved
__le32 reserved6[NUM_PORT_REGS*254]; Port registers 2 to MaxPorts
Replace this with the simpler:
struct xhci_port_regs port_regs[]; Port registers 1 to MaxPorts
Host Controller USB Port Register Set:
| Offset | Mnemonic | Register Name
--------------------------------------------------------------------------
| 0x0 | PORTSC | Port Status and Control
| 0x4 | PORTPMSC | Port Power Management Status and Control
| 0x8 | PORTLI | Port Link Info
| 0xC | PORTHLPMC | Port Hardware LPM Control
Niklas Neronin [Wed, 19 Nov 2025 14:24:00 +0000 (16:24 +0200)]
usb: xhci: add helper to read PORTSC register
Add a dedicated helper function to read the USB Port Status and Control
(PORTSC) register. This complements xhci_portsc_writel() and improves code
clarity by providing a clear counterpart for reading the register.
Niklas Neronin [Wed, 19 Nov 2025 14:23:59 +0000 (16:23 +0200)]
usb: xhci: add tracing for PORTSC register writes
Introduce a dedicated write function for the USB Port Register Set (PORTSC)
that includes tracing capabilities for values written to the PORTSC
register. This enhancement minimizes code duplication and improves
debugging.
The PORTSC register is part of the Host Controller USB Port Register Set,
comprising 4 x 32-bit registers. As the first register, PORTSC is accessed
directly via 'port->addr'. Future commits will introduce a dedicated Port
register struct to further streamline access.
By adding the xhci_portsc_writel() function prior to these changes, we
significantly reduce the number of same line modifications required.
Niklas Neronin [Wed, 19 Nov 2025 14:23:58 +0000 (16:23 +0200)]
usb: xhci: rework xhci_decode_portsc()
Rework xhci_decode_portsc(), which is used for PORTSC tracing, to make
the output more compact and general.
The function now first prints the multi-bit fields (port speed and link
state), followed by the abbreviated names of each individual bit as
defined in the xHCI specification. This reduces message length and makes
the output easier to read.
This change prepares for upcoming patches that will trace all PORTSC
writes, requiring the same decoding logic to handle both reads and writes.
This is particularly important for Read-Write-1-to-Clear (RW1C) bits,
where the semantics differ between read and write operations. For
example, when reading the Port Enabled bit, a set bit means the port is
enabled; when writing, a set bit indicates the port is being disabled.
The decoder now also includes the following fields:
Port Link State Write Strobe (LWS)
Device Removable (DR)
Warm Port Reset (WPR)
Mathias Nyman [Wed, 19 Nov 2025 14:23:57 +0000 (16:23 +0200)]
xhci: simplify and rework trb_in_td()
The trb_in_td() checking is quite complex, especially when checking for
TRBs in ranges that can span several segments.
Simplify the search by creating a position index for each TRB on the
ring, and just compare the position indexes.
Add a more generic dma_in_range() helper that checks if a trb dma
address is in the range between a start and end trb and call it from
trb_in_td()
Mathias Nyman [Wed, 19 Nov 2025 14:23:56 +0000 (16:23 +0200)]
xhci: Add helper to find trb from its dma address
Add a xhci_dma_to_trb() helper, and use it to find the transfer TRB
early in handle_tx_event() based on the dma address found in the
event TRB.
With this helper we can avoid using 'ep_seg' transfer TRB segment
variable as both a a boolean to indicate if the transfer TRB is part
of the next queued TD, and to actually find the transfer TRB based
on ep_seg and ep_trb_dma.
This is a first step in reworking and cleaning up trb_in_td() and
handle_tx_event()
Randy Dunlap [Tue, 4 Nov 2025 07:02:16 +0000 (23:02 -0800)]
usb: xhci-mtk: correct most kernel-doc problems in xhci-mtk.h
Correct the kernel-doc notation in xhck-mtk.h to avoid most kernel-doc
warnings. Summary of changes:
- don't use /** to begin comments that are not in kernel-doc format
- add missing "struct mu3h_sch_tt" kernel-doc line
- convert several "struct mu3h_...:" to using " - " to separate the
struct name from its short description
- add a missing @speed: struct member description
Warning messages that are fixed:
xhci-mtk.h:25: warning: This comment starts with '/**', but isn't a
kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* To simplify scheduler algorithm, set a upper limit for ESIT,
xhci-mtk.h:25: warning: missing initial short description on line:
* To simplify scheduler algorithm, set a upper limit for ESIT,
Warning: drivers/usb/host/xhci-mtk.h:36 Cannot find identifier on line:
* @fs_bus_bw_out: save bandwidth used by FS/LS OUT eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:37 Cannot find identifier on line:
* @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:38 Cannot find identifier on line:
* @ls_bus_bw: save bandwidth used by LS eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:39 Cannot find identifier on line:
* @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames
Warning: drivers/usb/host/xhci-mtk.h:40 Cannot find identifier on line:
* @in_ss_cnt: the count of Start-Split for IN eps
Warning: drivers/usb/host/xhci-mtk.h:41 Cannot find identifier on line:
* @ep_list: Endpoints using this TT
Warning: drivers/usb/host/xhci-mtk.h:42 Cannot find identifier on line:
*/
Warning: drivers/usb/host/xhci-mtk.h:43 Cannot find identifier on line:
struct mu3h_sch_tt {
Warning: drivers/usb/host/xhci-mtk.h:44 Cannot find identifier on line:
u16 fs_bus_bw_out[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:45 Cannot find identifier on line:
u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:46 Cannot find identifier on line:
u8 ls_bus_bw[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:47 Cannot find identifier on line:
u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT];
Warning: drivers/usb/host/xhci-mtk.h:48 Cannot find identifier on line:
u8 in_ss_cnt[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:49 Cannot find identifier on line:
struct list_head ep_list;
Warning: drivers/usb/host/xhci-mtk.h:50 Cannot find identifier on line:
};
Warning: drivers/usb/host/xhci-mtk.h:51 Cannot find identifier on line:
Warning: drivers/usb/host/xhci-mtk.h:52 Cannot find identifier on line:
/**
Warning: drivers/usb/host/xhci-mtk.h:121 struct member 'speed' not
described in 'mu3h_sch_ep_info'
Lad Prabhakar [Sat, 1 Nov 2025 04:24:40 +0000 (04:24 +0000)]
dt-bindings: usb: renesas,rzg3e-xhci: Add RZ/V2H(P) and RZ/V2N support
Add device tree binding support for the USB3.2 Gen2 controller on Renesas
RZ/V2H(P) and RZ/V2N SoCs. The USB3.2 IP on these SoCs is identical to
that found on the RZ/G3E SoC.
Add new compatible strings "renesas,r9a09g056-xhci" for RZ/V2N and
"renesas,r9a09g057-xhci" for RZ/V2H(P). Both variants use
"renesas,r9a09g047-xhci" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Update the title to be more generic as it now covers multiple SoC
families beyond just RZ/G3E.
Randy Dunlap [Sun, 26 Oct 2025 22:45:58 +0000 (15:45 -0700)]
usb: mtu3: fix invalid kernel-doc in mtu3.h
Fix unconventional kernel-doc lines to avoid warnings.
Summary of changes:
- change non-kernel-doc comments from "/**" to "/*"
- add "enum <enum-name> - short description" for undescribed enums
- use leading '@' for describing enum members and struct members
- add "struct <struct-name> - short description" for undescribed structs
Repair and remove invalid or unconventional lines in mtu3.h:
(This list is a combination of warnings from the old kernel-doc.pl and
the new kernel-doc.py scripts. This combo provides better coverage
of all problems.)
mtu3.h:69: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* IP TRUNK version
mtu3.h:69: warning: missing initial short description on line:
* IP TRUNK version
mtu3.h:78: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:78: warning: missing initial short description on line:
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:89: warning: This comment starts with '/**', but isn't
a kernel-doc comment.
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:89: warning: missing initial short description on line:
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:106: warning: Cannot understand * @MU3D_EP0_STATE_SETUP: waits for
SETUP or received a SETUP
on line 106 - I thought it was a doc line
mtu3.h:130: warning: cannot understand function prototype:
'enum mtu3_dr_force_mode'
mtu3.h:137: warning: Cannot understand * @base: the base address of fifo
on line 137 - I thought it was a doc line
mtu3.h:148: warning: missing initial short description on line:
* General Purpose Descriptor (GPD):
mtu3.h:174: warning: cannot understand function prototype:
'struct qmu_gpd'
mtu3.h:189: warning: cannot understand function prototype:
'struct mtu3_gpd_ring'
mtu3.h:198: warning: Cannot understand * @vbus: vbus 5V used by host mode
on line 198 - I thought it was a doc line
mtu3.h:225: warning: Cannot understand * @mac_base: register base address
of device MAC, exclude xHCI's
on line 225 - I thought it was a doc line
mtu3.h:275: warning: cannot understand function prototype: 'struct mtu3_ep'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_NONE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_HOST'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_DEVICE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:270 Cannot find identifier on line:
* @fifo_size: it is (@slot + 1) * @fifo_seg_size
Warning: drivers/usb/mtu3/mtu3.h:271 Cannot find identifier on line:
* @fifo_seg_size: it is roundup_pow_of_two(@maxp)
Warning: drivers/usb/mtu3/mtu3.h:272 Cannot find identifier on line:
*/
Warning: drivers/usb/mtu3/mtu3.h:273 Cannot find identifier on line:
struct mtu3_ep {
Warning: drivers/usb/mtu3/mtu3.h:274 Cannot find identifier on line:
struct usb_ep ep;
Warning: drivers/usb/mtu3/mtu3.h:275 Cannot find identifier on line:
char name[12];
Warning: drivers/usb/mtu3/mtu3.h:276 missing initial short description
on line:
struct mtu3 *mtu;
This removes all of the invalid/unconventional kernel-doc attempts but
still leaves quite a few struct members in structs ssusb_mtk, mtu3_ep,
and mtu3 without kernel-doc descriptions.
Sven Peter [Sun, 26 Oct 2025 12:21:36 +0000 (12:21 +0000)]
usb: dwc3: apple: Only support a single reset controller
As pointed out by Philipp, Apple's dwc3 controller only uses a single
reset line and there's thus no need to use reset controller array
functions. The only functional change here is replacing
devm_reset_control_array_get_exclusive with
devm_reset_control_get_exclusive. The rest are only cosmetic changes
to replace "resets" with "reset".
Reported-by: Philipp Zabel <p.zabel@pengutronix.de> Closes: https://lore.kernel.org/asahi/47112ace39ea096242e68659d67a401e931abf3a.camel@pengutronix.de/ Fixes: 0ec946d32ef7 ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver") Signed-off-by: Sven Peter <sven@kernel.org> Link: https://patch.msgid.link/20251026-b4-dwc3-apple-reset-array-fix-v1-1-ccdbacd63f78@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct hc_driver' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
52065 23176 256 75497 126e9 drivers/usb/host/xen-hcd.o
After:
=====
text data bss dec hex filename
52897 22344 256 75497 126e9 drivers/usb/host/xen-hcd.o
Linus Torvalds [Sun, 26 Oct 2025 17:33:46 +0000 (10:33 -0700)]
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Linus Torvalds [Sun, 26 Oct 2025 17:29:45 +0000 (10:29 -0700)]
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Linus Torvalds [Sun, 26 Oct 2025 17:24:39 +0000 (10:24 -0700)]
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Linus Torvalds [Sun, 26 Oct 2025 16:57:18 +0000 (09:57 -0700)]
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Linus Torvalds [Sun, 26 Oct 2025 16:54:36 +0000 (09:54 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Linus Torvalds [Sun, 26 Oct 2025 16:44:36 +0000 (09:44 -0700)]
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Linus Torvalds [Sun, 26 Oct 2025 16:42:19 +0000 (09:42 -0700)]
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Linus Torvalds [Sun, 26 Oct 2025 16:40:16 +0000 (09:40 -0700)]
Merge tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Linus Torvalds [Sat, 25 Oct 2025 16:35:26 +0000 (09:35 -0700)]
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Linus Torvalds [Sat, 25 Oct 2025 16:31:13 +0000 (09:31 -0700)]
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
Linus Torvalds [Sat, 25 Oct 2025 01:50:15 +0000 (18:50 -0700)]
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
Linus Torvalds [Fri, 24 Oct 2025 23:43:08 +0000 (16:43 -0700)]
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
Linus Torvalds [Fri, 24 Oct 2025 22:51:24 +0000 (15:51 -0700)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
Linus Torvalds [Fri, 24 Oct 2025 22:48:08 +0000 (15:48 -0700)]
Merge tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
Linus Torvalds [Fri, 24 Oct 2025 19:48:19 +0000 (12:48 -0700)]
Merge tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
Linus Torvalds [Fri, 24 Oct 2025 19:44:31 +0000 (12:44 -0700)]
Merge tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
Linus Torvalds [Fri, 24 Oct 2025 19:40:51 +0000 (12:40 -0700)]
Merge tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
Linus Torvalds [Fri, 24 Oct 2025 18:17:38 +0000 (11:17 -0700)]
Merge tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
Linus Torvalds [Fri, 24 Oct 2025 18:15:17 +0000 (11:15 -0700)]
Merge tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
Linus Torvalds [Fri, 24 Oct 2025 18:01:40 +0000 (11:01 -0700)]
Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
Linus Torvalds [Fri, 24 Oct 2025 17:45:29 +0000 (10:45 -0700)]
Merge tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
Arnd Bergmann [Fri, 17 Oct 2025 14:08:24 +0000 (16:08 +0200)]
soc: officially expand maintainership team
Since Olof moved on from the soc tree maintenance, Arnd has mainly taken
care of the day-to-day activities around the SoC tree by himself, which
is generally not a good setup.
Krzysztof, Linus and Alexandre have volunteered to become co-maintainers
of the SoC tree, with the plan of taking turns to do merges and reviews
to spread the workload. In addition, Drew joins as another reviewer.
UCSI v2 specification has increased the MSG_IN and MSG_OUT size from
16 bytes to 256 bytes each for the message exchange between OPM and PPM
This makes the total buffer size increase from 48 bytes to 528 bytes.
Update the buffer size to support this increase.
While at it also update the UCSI read/request buffers to be packed.
usb: typec: ucsi_glink: Increase buffer size to support UCSI v2
UCSI v2 specification has increased the MSG_IN and MSG_OUT size from
16 bytes to 256 bytes each for the message exchange between OPM and PPM
This makes the total buffer size increase from 48 bytes to 528 bytes.
Update the buffer size to support this increase.
of_msi_xlate() is required by drivers that can be configured
as modular, export the symbol.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Cc: Rob Herring <robh@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251021124103.198419-4-lpieralisi@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
usb: dwc3: Allow usb role swich control from userspace
There is a possibility of user needs for USB mode switching on boards
that lack external hardware support for dynamic host/device role
detection. This is particularly relevant in automotive applications
where userspace applications need to switch USB roles (host to device)
at runtime for CarPlay/Android Auto integration.
Add an `allow_userspace_control` flag to handle such cases. When
enabled, it exposes a sysfs attribute that allows userspace to switch
the USB role manually between host and device. This provides flexibility
for platforms that cannot rely on hardware-based mode detection.
The role switch can be done as below
echo host > /sys/class/usb_role/<ADDR>.usb-role-switch/role
echo device > /sys/class/usb_role/<ADDR>.usb-role-switch/role
Simona Vetter [Fri, 24 Oct 2025 11:39:21 +0000 (13:39 +0200)]
Merge tag 'drm-xe-fixes-2025-10-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Make madvise autoreset an explicit behavior requested by userspace
(Thomas Hellström)
Driver Changes:
- Drop XE_VMA flag conversion and ensure GPUVA flags are passed around
(homas Hellström)
- Fix missing wq allocation error checking (Matthew Brost)
Hao Ge [Thu, 23 Oct 2025 14:33:13 +0000 (22:33 +0800)]
slab: Fix obj_ext mistakenly considered NULL due to race condition
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com> Fixes: f7381b911640 ("slab: mark slab->obj_exts allocation failures unconditionally") Cc: <stable@vger.kernel.org> Signed-off-by: Hao Ge <gehao@kylinos.cn> Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Charles Keepax [Thu, 23 Oct 2025 15:49:01 +0000 (16:49 +0100)]
genirq/manage: Add buslock back in to enable_irq()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Charles Keepax [Thu, 23 Oct 2025 15:49:00 +0000 (16:49 +0100)]
genirq/manage: Add buslock back in to __disable_irq_nosync()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Charles Keepax [Thu, 23 Oct 2025 15:48:59 +0000 (16:48 +0100)]
genirq/chip: Add buslock back in to irq_set_handler()
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097de8 ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()") Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Ming Lei [Fri, 24 Oct 2025 01:34:59 +0000 (09:34 +0800)]
io_uring: fix buffer auto-commit for multishot uring_cmd
Commit 620a50c92700 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com> Fixes: 620a50c92700 ("io_uring: uring_cmd: add multishot support") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bjorn Helgaas [Thu, 23 Oct 2025 18:06:26 +0000 (13:06 -0500)]
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree
platforms") enabled Clock Power Management and L1 PM Substates, but those
features depend on CLKREQ# and possibly other device-specific
configuration. We don't know whether CLKREQ# is supported, so we shouldn't
blindly enable Clock PM and L1 PM Substates.
Enable only ASPM L0s and L1, and only when both ends of the link advertise
support for them.
Fixes: f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Link: https://lore.kernel.org/r/db5c95a1-cf3e-46f9-8045-a1b04908051a@xenosoft.de/ Reported-by: FUKAUMI Naoki <naoki@radxa.com> Closes: https://lore.kernel.org/r/22594781424C5C98+22cb5d61-19b1-4353-9818-3bb2b311da0b@radxa.com/ Reported-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20251015101304.3ec03e6b@bootlin.com/ Reported-by: Diederik de Haas <diederik@cknow-tech.com> Closes: https://lore.kernel.org/r/DDJXHRIRGTW9.GYC2ULZ5WQAL@cknow-tech.com/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Tested-by: Diederik de Haas <diederik@cknow-tech.com> Acked-by: Dragan Simic <dsimic@manjaro.org> Link: https://patch.msgid.link/20251023180645.1304701-1-helgaas@kernel.org
Stephen Rothwell [Wed, 22 Oct 2025 05:36:25 +0000 (16:36 +1100)]
MAINTAINERS: add Mark Brown as a linux-next maintainer
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Oct 2025 23:50:25 +0000 (16:50 -0700)]
Merge tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Arnd Bergmann [Thu, 23 Oct 2025 20:30:29 +0000 (22:30 +0200)]
Merge tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Arnd Bergmann [Thu, 23 Oct 2025 20:30:01 +0000 (22:30 +0200)]
Merge tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Arnd Bergmann [Thu, 23 Oct 2025 20:29:39 +0000 (22:29 +0200)]
Merge tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Linus Torvalds [Thu, 23 Oct 2025 19:26:47 +0000 (09:26 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
Linus Torvalds [Thu, 23 Oct 2025 17:03:18 +0000 (07:03 -1000)]
Merge tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Linus Torvalds [Thu, 23 Oct 2025 16:53:12 +0000 (06:53 -1000)]
Merge tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Linus Torvalds [Thu, 23 Oct 2025 16:48:32 +0000 (06:48 -1000)]
Merge tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Linus Torvalds [Thu, 23 Oct 2025 16:44:43 +0000 (06:44 -1000)]
Merge tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
projects / thirdparty / linux.git / log
