When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of
the current task, the following error will occur:
scx_foo[3795244] triggered exit kind 1024:
runtime error (called on a task not being operated on)
The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK()
when calling ops.tick(), which triggers the error during the subsequent
scx_kf_allowed_on_arg_tasks() check.
SCX_CALL_OP_TASK() was first introduced in commit 36454023f50b ("sched_ext:
Track tasks that are subjects of the in-flight SCX operation") to ensure
task's rq lock is held when accessing task's sched_group. Since ops.tick()
is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq
lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly,
the same changes should be made for ops.disable() and ops.exit_task(), as
they are also protected by task_rq_lock() and it's safe to access the
task's task_group.
Fixes: 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation") Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
struct io_tw_state is managed by core io_uring, and opcode handling code
must never try to cheat and create their own instances, it's plain
incorrect.
io_waitid_complete() attempts exactly that outside of the task work
context, and even though the ring is locked, there would be no one to
reap the requests from the defer completion list. It only works now
because luckily it's called before io_uring_try_cancel_uring_cmd(),
which flushes completions.
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
There is an error path in igt_ppgtt_alloc(), which leads
to ww object being passed down to i915_gem_ww_ctx_fini() without
initialization. Correct that by only putting ppgtt->vm and
returning early.
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
The CPU usage time is the time when user, system or both are using the CPU.
Steal time is the time when CPU is waiting to be run by the Hypervisor. It
should not be added to the CPU usage time, hence removing it from the
usage_usec entry.
Fixes: 936f2a70f2077 ("cgroup: add cpu.stat file to root cgroup") Acked-by: Axel Busch <axel.busch@ibm.com> Acked-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Muhammad Adeel <muhammad.adeel@ibm.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
Inside the probe function when pm_runtime_enable() is called,
the PM core invokes a resume callback if the device Host1x is
in a suspended state. As it can be seen in the logs above,
this leads to host1x_intr_start() function call which is
trying to acquire a mutex lock. But, the function
host_intr_init() only gets called after the pm_runtime_enable()
where mutex is initialised leading to the use of mutex
prior to its initialisation.
Fix this by moving the mutex initialisation prior to the runtime
PM enablement function pm_runtime_enable() in probe.
The loop that detects/populates cache information already has a bounds
check on the array size but does not account for cache levels with
separate data/instructions cache. Fix this by incrementing the index
for any populated leaf (instead of any populated level).
Fixes: 5d425c186537 ("arm64: kernel: add support for cpu cache information") Signed-off-by: Radu Rendec <rrendec@redhat.com> Link: https://lore.kernel.org/r/20250206174420.2178724-1-rrendec@redhat.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The light_up_connector helper function in the HDMI infrastructure unit
tests uses drm_atomic_set_crtc_for_connector(), but fails when it
returns an error.
This function can return EDEADLK though if the sequence needs to be
restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it
properly.
Let's handle EDEADLK and restart the sequence in our tests as well.
While performing the rq locking dance in dispatch_to_local_dsq(), we may
trigger the following lock imbalance condition, in particular when
multiple tasks are rapidly changing CPU affinity (i.e., running a
`stress-ng --race-sched 0`):
[ 13.413579] =====================================
[ 13.413660] WARNING: bad unlock balance detected!
[ 13.413729] 6.13.0-virtme #15 Not tainted
[ 13.413792] -------------------------------------
[ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at:
[ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0
[ 13.414111] but there are no more locks to release!
[ 13.414176]
[ 13.414176] other info that might help us debug this:
[ 13.414258] 1 lock held by kworker/1:1/80:
[ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90
[ 13.414612]
[ 13.414612] stack backtrace:
[ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme #15
[ 13.415505] Workqueue: 0x0 (events)
[ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms
[ 13.415570] Call Trace:
[ 13.415700] <TASK>
[ 13.415744] dump_stack_lvl+0x78/0xe0
[ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.415884] print_unlock_imbalance_bug+0x11b/0x130
[ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.416226] lock_release+0x231/0x2c0
[ 13.416326] _raw_spin_unlock+0x1b/0x40
[ 13.416422] dispatch_to_local_dsq+0x108/0x1a0
[ 13.416554] flush_dispatch_buf+0x199/0x1d0
[ 13.416652] balance_one+0x194/0x370
[ 13.416751] balance_scx+0x61/0x1e0
[ 13.416848] prev_balance+0x43/0xb0
[ 13.416947] __pick_next_task+0x6b/0x1b0
[ 13.417052] __schedule+0x20d/0x1740
This happens because dispatch_to_local_dsq() is racing with
dispatch_dequeue() and, when the latter wins, we incorrectly assume that
the task has been moved to dst_rq.
The commit 68f83057b913("workqueue: Reap workers via kthread_stop() and
remove detach_completion") adds code to reap the normal workers but
mistakenly does not handle the rescuer and also removes the code waiting
for the rescuer in put_unbound_pool(), which caused a use-after-free bug
reported by Cheung Wall.
To avoid the use-after-free bug, the pool’s reference must be held until
the detachment is complete. Therefore, move the code that puts the pwq
after detaching the rescuer from the pool.
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Reported-by: Bjorn Helgaas <helgaas@kernel.org> Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
This is typo issue and misusage about GCFG feature macro. The code
is wrong, only that it does not cause obvious problem since GCFG is
set again on vCPU context switch.
LoongArch re-enables interrupts on its idle routine and performs a
TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the idle instruction may set the
TIF_NEED_RESCHED flag. In order to deal with such a race, IRQs
interrupting __arch_cpu_idle() rollback their return address to the
beginning of __arch_cpu_idle() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __arch_cpu_idle() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop can
handle both TIF_NEED_RESCHED and pending timers.
Fixes HW RX timestamp in the following scenario:
- AF_PACKET socket with enabled HW RX timestamps is created
- AF_XDP socket with enabled zero copy is created
- frame is forwarded to the BPF program, where the timestamp should
still be readable (extracted by igc_xdp_rx_timestamp(), kfunc
behind bpf_xdp_metadata_rx_timestamp())
- the frame got XDP_PASS from BPF program, redirecting to the stack
- AF_PACKET socket receives the frame with HW RX timestamp
Moves the skb timestamp setting from igc_dispatch_skb_zc() to
igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to
igc_construct_skb().
This issue can also be reproduced by running:
# tools/testing/selftests/bpf/xdp_hw_metadata enp1s0
When a frame with the wrong port 9092 (instead of 9091) is used:
# echo -n xdp | nc -u -q1 192.168.10.9 9092
then the RX timestamp is missing and xdp_hw_metadata prints:
skb hwtstamp is not found!
With this fix or when copy mode is used:
# tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0
then RX timestamp is found and xdp_hw_metadata prints:
found skb hwtstamp = 1736509937.852786132
Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device.
Fixes: 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()") Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250203091203.1744-1-m.masimov@mt-integration.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there is no dummy cycle in the spi-nor commands, both dummy bus cycle
bytes and width are zero. Because of the cpu's warning when divided by
zero, the warning should be avoided. Return just zero to avoid such
calculations.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver") Co-developed-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://patch.msgid.link/20250206085747.3834148-1-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
Commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
unconditionally switched to printing hex values in
pinconf_generic_dump_one(). However, if a dump format is registered for the
dumped pin, the hex value is printed as well. This hex value does not
necessarily correspond 1:1 with the hardware register value (as noted by
commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")). As a
result, user-facing output may include information like:
output drive strength (0x100 uA).
To address this, check if a dump format is registered for the dumped
property, and print the unsigned value instead when applicable.
Clang's -Wformat-overflow and -Wformat-truncation have chosen to check
'%p' unlike GCC but it does not know about the kernel's pointer
extensions in lib/vsprintf.c, so the developers split that part of the
warning out for the kernel to disable because there will always be false
positives.
Commit 908dd508276d ("kbuild: enable -Wformat-truncation on clang") did
disabled these warnings but only in a block that would be called when
W=1 was not passed, so they would appear with W=1. Move the disabling of
the non-kprintf warnings to a block that always runs so that they are
never seen, regardless of warning level.
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some of the platforms may connect the INT pin via inversion logic
effectively make the triggering to be active-low.
Remove explicit trigger flag to respect the settings from firmware.
Without this change even idling chip produces spurious interrupts
and kernel disables the line in the result:
There are two registers in the hardware, one, "Select PWM",
is per-port configuration enabling PWM function instead of GPIO.
The other one is "PWM Select" is per-PWM selector to configure
PWM itself. Original code uses abbreviation of the latter
to describe the former. Rename it to follow the datasheet.
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1] Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2] Reported-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Patrick Bellasi <derkling@google.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfsd_file_dispose_list_delayed can be called from the filecache
laundrette, which is shut down after the nfsd threads are shut down and
the nfsd_serv pointer is cleared. If nn->nfsd_serv is NULL then there
are no threads to wake.
Ensure that the nn->nfsd_serv pointer is non-NULL before calling
svc_wake_up in nfsd_file_dispose_list_delayed. This is safe since the
svc_serv is not freed until after the filecache laundrette is cancelled.
Reported-by: Salvatore Bonaccorso <carnil@debian.org> Closes: https://bugs.debian.org/1093734 Fixes: ffb402596147 ("nfsd: Don't leave work of closing files to a work queue") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If nfs4_client is in courtesy state then there is no point to send
the callback. This causes nfsd4_shutdown_callback to hang since
cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP
notifies NFSD that the connection was dropped.
This patch modifies nfsd4_run_cb_work to skip the RPC call if
nfs4_client is in courtesy state.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Fixes: 66af25799940 ("NFSD: add courteous server support for thread with only delegation") Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If getting acl_default fails, acl_access and acl_default will be released
simultaneously. However, acl_access will still retain a pointer pointing
to the released posix_acl, which will trigger a WARNING in
nfs3svc_release_getacl like this:
Clear acl_access/acl_default after posix_acl_release is called to prevent
UAF from being triggered.
Fixes: a257cdd0e217 ("[PATCH] NFSD: Add server support for NFSv3 ACLs.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241107014705.2509463-1-lilingfeng@huaweicloud.com/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Rick Macklem <rmacklem@uoguelph.ca> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quota counter updates are tracked via incore objects which hang off the
xfs_trans object. These changes are then turned into dirty log items in
xfs_trans_apply_dquot_deltas just prior to commiting the log items to
the CIL.
However, updating the incore deltas do not cause XFS_TRANS_DIRTY to be
set on the transaction. In other words, a pure quota counter update
will be silently discarded if there are no other dirty log items
attached to the transaction.
This is currently not the case anywhere in the filesystem because quota
updates always dirty at least one other metadata item, but a subsequent
bug fix will add dquot log item precommits, so we actually need a dirty
dquot log item prior to xfs_trans_run_precommits. Also let's not leave
a logic bomb.
Cc: <stable@vger.kernel.org> # v2.6.35 Fixes: 0924378a689ccb ("xfs: split out iclog writing from xfs_trans_commit()") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
==================================================================
BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334
[inline]
BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0
fs/ocfs2/dir.c:367
Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802
The two reports are all caused invalid negative i_size of dir inode. For
ocfs2, dir_inode can't be negative or zero.
Here add a check in which is called by ocfs2_check_dir_for_entry(). It
fixes the second report as ocfs2_check_dir_for_entry() must be called
before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with
OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize.
Just like it's normal for unset values to be zero, unset strings should be
empty instead of containing random values.
It seems to be a typical mistake that the mask returned by statmount is not
checked, which can result in various bugs.
With this fix, these bugs are prevented, since it is highly likely that
userspace would just want to turn the missing mask case into an empty
string anyway (most of the recently found cases are of this type).
Currently these mount options aren't accessible via statmount().
The read handler for /proc/#/mountinfo calls security_sb_show_options()
to emit the security options after emitting superblock flag options, but
before calling sb->s_op->show_options.
Have statmount_mnt_opts() call security_sb_show_options() before
calling ->show_options.
Commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Julia Filipchuk <julia.filipchuk@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: stable@vger.kernel.org Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool") Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function") Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf5002776117a69caed3b31c10bf7341bec) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A long time ago, we had an issue with the Raven system when it was
connected to two displays: one with DP and another with HDMI. After the
system woke up from suspension, we saw a solid green screen caused by an
underflow generated by bad DCC metadata. To workaround this issue, the
'commit 87b7ebc2e16c ("drm/amd/display: Fix green screen issue after
suspend")' was introduced to disable the DCC for a few frames after in
the resume phase. However, in hindsight, this solution was probably a
workaround at the kernel level for some issues from another part
(probably other driver components or user space). After applying this
patch and trying to reproduce the green issue in a similar hardware
system but using the latest kernel and userspace, we cannot see the
issue, which makes this workaround obsolete and creates extra
unnecessary complexity to the code; for all of this reason, this commit
reverts the original change.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit "selftests/sched_ext: fix build after renames in sched_ext API”
was pulled into 6.12.y without the sched_ext API renames it depends on.
The prereqs can be found in
https://lore.kernel.org/lkml/20241110200308.103681-1-tj@kernel.org/
As a result, sched_ext selftests fail to compile.
Cc: stable@vger.kernel.org Fixes: fc20e87419e59 ("selftests/sched_ext: fix build after renames in sched_ext API") Signed-off-by: Libo Chen <libo.chen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() call from linear_set_limits() because
there is no corresponding queue_limits_start_update() call.
This bug was discovered by annotating all mutex operations with clang
thread-safety attributes and by building the kernel with clang and
-Wthread-safety.
Cc: Yu Kuai <yukuai3@huawei.com> Cc: Coly Li <colyli@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: 127186cfb184 ("md: reintroduce md-linear") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250129225636.2667932-1-bvanassche@acm.org Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()") Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit re-attempts the backport of the change to the linux-6.12.y
branch. Commit 9f372e86b9bd ("btrfs: avoid monopolizing a core when
activating a swap file") on this branch was reverted.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The backport for linux-6.12.y, commit 9f372e86b9bd ("btrfs: avoid
monopolizing a core when activating a swap file"), inserted
cond_resched() in the wrong location.
Revert it now; a subsequent commit will re-backport the original patch.
Fixes: 9f372e86b9bd ("btrfs: avoid monopolizing a core when activating a swap file") # linux-6.12.y Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The QSPI peripheral control and status registers are
accessible via the SoC's APB bus, whereas MMIO transactions'
data travels on the AHB bus.
Microchip documentation and even sample code from Atmel
emphasises the need for a memory barrier before the first
MMIO transaction to the AHB-connected QSPI, and before the
last write to its registers via APB. This is achieved by
the following lines in `atmel_qspi_transfer()`:
/* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
(void)atmel_qspi_read(aq, QSPI_IFR);
However, the current documentation makes no mention to
synchronization requirements in the other direction, i.e.
after the last data written via AHB, and before the first
register access on APB.
In our case, we were facing an issue where the QSPI peripheral
would cease to send any new CSR (nCS Rise) interrupts,
leading to a timeout in `atmel_qspi_wait_for_completion()`
and ultimately this panic in higher levels:
ubi0 error: ubi_io_write: error -110 while writing 63108 bytes
to PEB 491:128, written 63104 bytes
After months of extensive research of the codebase, fiddling
around the debugger with kgdb, and back-and-forth with
Microchip, we came to the conclusion that the issue is
probably that the peripheral is still busy receiving on AHB
when the LASTXFER bit is written to its Control Register
on APB, therefore this write gets lost, and the peripheral
still thinks there is more data to come in the MMIO transfer.
This was first formulated when we noticed that doubling the
write() of QSPI_CR_LASTXFER seemed to solve the problem.
Ultimately, the solution is to introduce memory barriers
after the AHB-mapped MMIO transfers, to ensure ordering.
Refactor the code to introduce an ops struct, to prepare for merging
support for later SoCs, such as SAMA7G5. This code was based on the
vendor's kernel (linux4microchip). Cc'ing original contributors.
During log recovery, while updating the in-memory superblock from the
primary SB buffer, if an error is encountered, such as superblock
corruption occurs or some other reasons, we will proceed to out_release
and release the xfs_buf. However, this is insufficient because the
xfs_buf's log item has already been initialized and the xfs_buf is held
by the buffer log item as follows, the xfs_buf will not be released,
causing the mount thread to hang.
The solution is straightforward, we simply need to allow it to be
handled by the normal buffer write process. The filesystem will be
shutdown before the submission of buffer_list in xlog_do_recovery_pass(),
ensuring the correct release of the xfs_buf as follows:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
xlog_recover_buf_commit_pass2
error = xlog_recover_do_primary_sb_buffer
//Encounter error and return
if (error)
goto out_writebuf
...
out_writebuf:
xfs_buf_delwri_queue(bp, buffer_list) //add bp to list
return error
...
if (!list_empty(&buffer_list))
if (error)
xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); //shutdown first
xfs_buf_delwri_submit(&buffer_list); //submit buffers in list
__xfs_buf_submit
if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log))
xfs_buf_ioend_fail(bp) //release bp correctly
Fixes: 6a18765b54e2 ("xfs: update the file system geometry after recoverying superblock buffers") Cc: stable@vger.kernel.org # v6.12 Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I /think/ the problem here is that xfs_dquot_attach_buf during
quotacheck will release the buffer while it's holding the qli_lock.
Because this is a cached buffer, xfs_buf_rele_cached takes b_lock before
decrementing b_hold. Other threads have taught lockdep that a locking
dependency chain is bp->b_lock -> bch->bc_lock -> l(ru)->lock; and that
another chain is l(ru)->lock -> lp->qli_lock. Hence we do not want to
take b_lock while holding qli_lock.
Reported-by: syzbot+3126ab3db03db42e7a31@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v6.13-rc3 Fixes: ca378189fdfa89 ("xfs: convert quotacheck to attach dquot buffers") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we've converted the dquot logging machinery to attach the dquot
buffer to the li_buf pointer so that the AIL dqflush doesn't have to
allocate or read buffers in a reclaim path, do the same for the
quotacheck code so that the reclaim shrinker dqflush call doesn't have
to do that either.
Cc: <stable@vger.kernel.org> # v6.12 Fixes: 903edea6c53f09 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
within the NOFAIL checks. What's happening here is that the XFS AIL is
trying to write a disk quota update back into the filesystem, but for
that it needs to read the ondisk buffer for the dquot. The buffer is
not in memory anymore, probably because it was evicted. Regardless, the
buffer cache tries to allocate a new buffer, but those allocations are
NOFAIL. The AIL thread has marked itself PF_MEMALLOC (aka noreclaim)
since commit 43ff2122e6492b ("xfs: on-stack delayed write buffer lists")
presumably because reclaim can push on XFS to push on the AIL.
An easy way to fix this probably would have been to drop the NOFAIL flag
from the xfs_buf allocation and open code a retry loop, but then there's
still the problem that for bs>ps filesystems, the buffer itself could
require up to 64k worth of pages.
Inode items had similar behavior (multi-page cluster buffers that we
don't want to allocate in the AIL) which we solved by making transaction
precommit attach the inode cluster buffers to the dirty log item. Let's
solve the dquot problem in the same way.
So: Make a real precommit handler to read the dquot buffer and attach it
to the log item; pass it to dqflush in the push method; and have the
iodone function detach the buffer once we've flushed everything. Add a
state flag to the log item to track when a thread has entered the
precommit -> push mechanism to skip the detaching if it turns out that
the dquot is very busy, as we don't hold the dquot lock between log item
commit and AIL push).
Reading and attaching the dquot buffer in the precommit hook is inspired
by the work done for inode cluster buffers some time ago.
Cc: <stable@vger.kernel.org> # v6.12 Fixes: 903edea6c53f09 ("mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first step towards holding the dquot buffer in the li_buf instead of
reading it in the AIL is to separate the part that reads the buffer from
the actual flush code. There should be no functional changes.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Superblock counter updates are tracked via per-transaction counters in
the xfs_trans object. These changes are then turned into dirty log
items in xfs_trans_apply_sb_deltas just prior to commiting the log items
to the CIL.
However, updating the per-transaction counter deltas do not cause
XFS_TRANS_DIRTY to be set on the transaction. In other words, a pure sb
counter update will be silently discarded if there are no other dirty
log items attached to the transaction.
This is currently not the case anywhere in the filesystem because sb
counter updates always dirty at least one other metadata item, but let's
not leave a logic bomb.
Cc: <stable@vger.kernel.org> # v2.6.35 Fixes: 0924378a689ccb ("xfs: split out iclog writing from xfs_trans_commit()") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, __xfs_trans_commit calls xfs_defer_finish_noroll, which calls
__xfs_trans_commit again on the same transaction. In other words,
there's function recursion that has caused minor amounts of confusion in
the past. There's no reason to keep this around, since there's only one
place where we actually want the xfs_defer_finish_noroll, and that is in
the top level xfs_trans_commit call.
Fixes: 98719051e75ccf ("xfs: refactor internal dfops initialization") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare ftrace_get_parent_ra_addr() as static to suppress clang
compiler warning that 'no previous prototype'. This function is
not intended to be called from other parts.
Fix follow error with clang-19:
arch/mips/kernel/ftrace.c:251:15: error: no previous prototype for function 'ftrace_get_parent_ra_addr' [-Werror,-Wmissing-prototypes]
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
arch/mips/kernel/ftrace.c:251:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
| static
1 error generated.
Signed-off-by: WangYuli <wangyuli@uniontech.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fixup section was added again by mistake when test_fp_ctl() was
removed. The reason for the removal of the fixup section is described in
commit 484a8ed8b7d1 ("s390/extable: add dedicated uaccess handler").
Remove it again for the same reason.
Add an exception handler which handles exceptions when the floating point
control register is attempted to be set to invalid values. The exception
handler sets the floating point control register to zero and continues
execution at the specified address.
The new sfpc inline assembly is open-coded to make back porting a bit
easier.
Fixes: 702644249d3e ("s390/fpu: get rid of test_fp_ctl()") Cc: stable@vger.kernel.org Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before attaching a new root to the old root, the children counter of the
new root is checked to verify that only the upcoming CPU's top group have
been connected to it. However since the recently added commit b729cc1ec21a
("timers/migration: Fix another race between hotplug and idle entry/exit")
this check is not valid anymore because the old root is pre-accounted
as a child to the new root. Therefore after connecting the upcoming
CPU's top group to the new root, the children count to be expected must
be 2 and not 1 anymore.
This omission results in the old root to not be connected to the new
root. Then eventually the system may run with more than one top level,
which defeats the purpose of a single idle migrator.
Also the old root is pre-accounted but not connected upon the new root
creation. But it can be connected to the new root later on. Therefore
the old root may be accounted twice to the new root. The propagation of
such overcommit can end up creating a double final top-level root with a
groupmask incorrectly initialized. Although harmless given that the final
top level roots will never have a parent to walk up to, this oddity
opportunistically reported the core issue:
Clock description in DT binding introduced by commit f69060c14431
("dt-bindings: rtc: zynqmp: Add clock information") is talking about "rtc"
clock name but driver is checking "rtc_clk" name instead.
Because clock is optional property likely in was never handled properly by
the driver.
Fixes: 07dcc6f9c762 ("rtc: zynqmp: Add calibration set and get support") Signed-off-by: Michal Simek <michal.simek@amd.com> Cc: stable@kernel.org Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/cd5f0c9d01ec1f5a240e37a7e0d85b8dacb3a869.1732723280.git.michal.simek@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
The ioctl and sysfs handlers unconditionally call the ->enable callback.
Not all drivers implement that callback, leading to NULL dereferences.
Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c.
Instead use a dummy callback if no better was specified by the driver.
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250123-ptp-enable-v1-1-b015834d3a47@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PFC_MASK value for the PFC_mx registers is currently hardcoded to
0x07, which is correct for SoCs in the RZ/G2L family, but insufficient
for RZ/V2H and RZ/G3E, where the mask value should be 0x0f. This
discrepancy causes incorrect PFC register configuration on RZ/V2H and
RZ/G3E SoCs.
On RZ/G2L, the PFC_mx bitfields are also 4 bits wide, with bit 4 marked
as reserved. The reserved bits are documented to read as zero and be
ignored when written. Updating the PFC_MASK definition from 0x07 to
0x0f ensures compatibility with both SoC families while maintaining
correct behavior on RZ/G2L.
Commit 50ebd19e3585 ("pinctrl: samsung: drop pin banks references on
error paths") fixed the pin bank references on the error paths of the
probe function, but there is still an error path where this is not done.
If samsung_pinctrl_get_soc_data() does not fail, the child references
will have acquired, and they will need to be released in the error path
of platform_get_irq_optional(), as it is done in the following error
paths within the probe function.
Replace the direct return in the error path with a goto instruction to
the cleanup function.
Cc: stable@vger.kernel.org Fixes: a382d568f144 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com
[krzysztof: change Fixes SHA to point to commit introducing the return
leading to OF node leak] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-4-tglozar@redhat.com Fixes: a828cd18bc4a ("rtla: Add timerlat tool and timelart top mode") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-3-tglozar@redhat.com Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
$ rtla timerlat top -u
^\Quit (core dumped)
$ rtla timerlat top -k -d 1s
Timer Latency
0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
The issue persists until OSNOISE_WORKLOAD is set manually by running:
$ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if
available to fix the issue.
Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250107144823.239782-4-tglozar@redhat.com Fixes: cdca4f4e5e8e ("rtla/timerlat_top: Add timerlat user-space support") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
projects / thirdparty / kernel / stable.git / log
