As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.
Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver is for an FPGA logic core, so there can be arbitrarily many
instances of the bus on a given system. Previously all of the I2C bus
names were "xiic-i2c" which caused issues with lm_sensors when trying to
map human-readable names to sensor inputs because it could not properly
distinguish the busses, for example. Append the platform device name to
the I2C bus name so it is unique between different instances.
Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c) Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
We need to calculate the max file size accurately if the total blocks
that can address by block tree exceed the upper_limit. But this check is
not correct now, it only compute the total data blocks but missing
metadata blocks are needed. So in the case of "data blocks < upper_limit
&& total blocks > upper_limit", we will get wrong result. Fortunately,
this case could not happen in reality, but it's confused and better to
correct the computing.
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: James Morris <jmorris@namei.org> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: tomoyo-dev-en@lists.osdn.me Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Sasha Levin <sashal@kernel.org>
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().
Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32
got unsigned int
Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code") Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
got int
Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:
warning: invalid assignment: |=
Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.
Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:
drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Signed-off-by: Aashish Sharma <shraash@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.
Addresses-Coverity: ("Unused value") Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.
For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.
[jkosina@suse.cz: finalize trimmed sentence in changelog as spotted by Benjamin] Fixes: 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.
of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.
Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220308020146.26496-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.
Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:
This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.
Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().
Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an invalid option value is used with "printk.devkmsg=<value>",
it is silently ignored.
If a valid option value is used, it is honored but the wrong return
value (0) is used, indicating that the command line option had an
error and was not handled. This string is not added to init's
environment strings due to init/main.c::unknown_bootoption()
checking for a '.' in the boot option string and then considering
that string to be an "Unused module parameter".
Print a warning message if a bad option string is used.
Always return 1 from the __setup handler to indicate that the command
line option has been handled.
Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Reviewed-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.
Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2) Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: Ray Jui <rjui@broadcom.com> CC: Scott Branden <sbranden@broadcom.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 5f9a50c3e55e ("ASoC: Davinci: McBSP: add device tree support for McBSP") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220228031540.3571959-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Call i2c_unregister_device(audio) on this error path.
Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code has two bugs:
1) "cnt" is 255 but the size of the buffer is 256 so the last byte is
not used.
2) If we try to print more than 255 characters then "cnt" will be
negative and that will trigger a WARN() in snprintf(). The fix for
this is to use scnprintf() instead of snprintf().
We can re-write this code to be cleaner:
1) Rename "offset" to "off" because that's shorter.
2) Get rid of the "cnt" variable and just use "size - off" directly.
3) Get rid of the "read" variable and just increment "off" directly.
Fixes: 96fe6a2109db ("fbdev: Add VESA Coordinated Video Timings (CVT) support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will
be called to destroy modelist in the error handling path. But modelist
has not been initialized yet, so it will result in null-ptr-deref.
Initialize modelist before calling fb_alloc_cmap() to fix this bug.
Fixes: 3c8a63e22a08 ("Add support for SMSC UFX6000/7000 USB display adapters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change from shifting 'unsigned long' to 'u64' to prevent the config bits
being lost on a 32-bit kernel.
Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220131072453.2839535-5-adrian.hunter@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.
Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched") Signed-off-by: Bharata B Rao <bharata@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.
Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.
If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.
ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list
but ccp_dmaengine_unregister didn't remove them.
That can cause crashes in various dmaengine methods that tries to use dma_dev->channels
Fixes: 58ea8abf4904 ("crypto: ccp - Register the CCP as a DMA...") Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').
Unknown kernel command line parameters "erst_disable
bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
erst_disable
bert_disable
hest_disable
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64") Suggested-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid"
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid
Fixes: 2ce986892faf ("PM / sleep: Enhance test_suspend option with repeat capability") Fixes: 27ddcc6596e5 ("PM / sleep: Add state field to pm_states[] entries") Fixes: a9d7052363a6 ("PM: Separate suspend to RAM functionality from core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function") Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield") Reported-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: f333a331adfa ("spi/tegra114: add spi driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220128165238.25615-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function crypto_authenc_decrypt_tail discards its flags
argument and always relies on the flags from the original request
when starting its sub-request.
This is clearly wrong as it may cause the SLEEPABLE flag to be
set when it shouldn't.
Fixes: 92d95ba91772 ("crypto: authenc - Convert to new AEAD interface") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands." If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.
pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.
We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.
Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: <Stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add required VDD supplies to HDMI block on SMDK5420. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale Octa and Odroid XU3 boards (voltage matches).
Add required VDD supplies to HDMI block on SMDK5250. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale 5250 board (voltage matches).
The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250,
instead of proper pin gpa1-5.
Fixes: f8bfe2b050f3 ("ARM: dts: add pin state information in client nodes for Exynos5 platforms") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20211230195325.328220-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx
register being truncated to offset x = 21, causing error correction to
fail if more than 22 bit errors and if 24 or 32 bit error correction
was supported.
The code to set the shifter STe palette registers has a long
standing operator precedence bug, manifesting as colors set
on a 2 bits per pixel frame buffer coming up with a distinctive
blue tint.
Add parentheses around the calculation of the per-color palette
data before shifting those into their respective bit field position.
This bug goes back a long way (2.4 days at the very least) so there
won't be a Fixes: tag.
When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().
This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.
One of the possible race conditions is shown below:
The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
...
queue_work_on+0x3f/0x50
pty_write+0xcd/0xe0pty_write+0xcd/0xe0
sp_xmit_on_air+0xb2/0x1f0
call_timer_fn+0x28/0x150
__run_timers.part.0+0x3c2/0x470
run_timer_softirq+0x3b/0x80
__do_softirq+0xf1/0x380
...
This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__acpi_node_get_property_reference() is documented to return -ENOENT if
the caller requests a property reference at an index that does not exist,
not -EINVAL which it actually does.
Fix this by returning -ENOENT consistenly, independently of whether the
property value is a plain reference or a package.
Fixes: c343bc2ce2c6 ("ACPI: properties: Align return codes of __acpi_node_get_property_reference()") Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bio chain generated by blk_queue_split().
Some split bio fails and propagates its error status to the "parent" bio.
But then the (last part of the) parent bio itself completes without error.
We would clobber the already recorded error status with BLK_STS_OK,
causing silent data corruption.
Reproducer:
-----------
How to trigger this in the real world within seconds:
DRBD on top of degraded parity raid,
small stripe_cache_size, large read_ahead setting.
Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED",
umount and mount again, "reboot").
Cause significant read ahead.
Large read ahead request is split by blk_queue_split().
Parts of the read ahead that are already in the stripe cache,
or find an available stripe cache to use, can be serviced.
Parts of the read ahead that would need "too much work",
would need to wait for a "stripe_head" to become available,
are rejected immediately.
For larger read ahead requests that are split in many pieces, it is very
likely that some "splits" will be serviced, but then the stripe cache is
exhausted/busy, and the remaining ones will be rejected.
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.
From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.
Cc: stable@vger.kernel.org Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".
Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA") Cc: stable@vger.kernel.org Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced
vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it
put a "continue" to next vma where its precedents go to update flags on
current vma before advancing: that left vma with the wrong setting in the
infamous vma_merge() case 8.
v3.10 commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy")
tried to fix that in vma_adjust(), without fully understanding the issue.
v3.11 commit 3964acd0dbec ("mm: mempolicy: fix mbind_range() &&
vma_adjust() interaction") reverted that, and went about the fix in the
right way, but chose to optimize out an unnecessary mpol_dup() with a
prior mpol_equal() test. But on tmpfs, that also pessimized out the vital
call to its ->set_policy(), leaving the new mbind unenforced.
The user visible effect was that the pages got allocated on the local
node (happened to be 0), after the mbind() caller had specifically
asked for them to be allocated on node 1. There was not any page
migration involved in the case reported: the pages simply got allocated
on the wrong node.
Just delete that optimization now (though it could be made conditional on
vma not having a set_policy). Also remove the "next" variable: it turned
out to be blameless, but also pointless.
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn
is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is
not enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents
the maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as
walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the
free_list of each zone in each node, which are assumed to be initialised
due to the zone not being empty.
As free_area_init_core() never initialised the free_lists[] this results
in the following kernel crash when trying to read /proc/pagetypeinfo:
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: 2a1e274acf0b ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis)
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org
Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr ffff8881243384e0 by task mount/719
The buggy address belongs to the object at ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [ffff8881243384b8, ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: stable@vger.kernel.org Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220111201426.326777-2-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync().
Both xprt_unlock_connect() and xprt_release() call
->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect()
which calls mod_timer().
This may result in mod_timer() being called *after* del_timer_sync().
When this happens, the timer may fire long after the xprt has been freed,
and run_timer_softirq() will probably crash.
The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is
always called under ->transport_lock. So if we take ->transport_lock to
call del_timer_sync(), we can be sure that mod_timer() will run first
(if it runs at all).
Setting PTRACE_O_SUSPEND_SECCOMP is supposed to be a highly privileged
operation because it allows the tracee to completely bypass all seccomp
filters on kernels with CONFIG_CHECKPOINT_RESTORE=y. It is only supposed to
be settable by a process with global CAP_SYS_ADMIN, and only if that
process is not subject to any seccomp filters at all.
However, while these permission checks were done on the PTRACE_SETOPTIONS
path, they were missing on the PTRACE_SEIZE path, which also sets
user-specified ptrace flags.
Move the permissions checks out into a helper function and let both
ptrace_attach() and ptrace_setoptions() call it.
Cc: stable@kernel.org Fixes: 13c4a90119d2 ("seccomp: add ptrace options for suspend/resume") Signed-off-by: Jann Horn <jannh@google.com> Link: https://lkml.kernel.org/r/20220319010838.1386861-1-jannh@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <stable@vger.kernel.org> Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_convert_raw_to_processed_unlocked() assumes the offset is an
integer. Make a best effort to get a valid offset value for fractional
cases without breaking implicit truncations.
Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220108205319.2046348-4-liambeguin@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
