Bernd Edlinger [Fri, 20 May 2022 06:02:47 +0000 (08:02 +0200)]
Fix a crash in asn1_item_embed_new
This happens usually if an template object is created
and there is an out of memory error before the ASN1_OP_NEW_POST
method is called, but asn1_item_embed_free calls now the
ASN1_OP_FREE_POST which may crash because the object is not
properly initialized. Apparently that is only an issue with
the ASN1_OP_FREE_POST handling of crypot/x509/x_crl.c, which
ought to be tolerant to incomplete initialized objects.
The error can be reproduced with the reproducible error injection patch:
$ ERROR_INJECT=1652890550 ../util/shlib_wrap.sh ./asn1-test ./corpora/asn1/0ff17293911f54d1538b9896563a4048d67d9ee4
#0 0x7faae9dbeeba in __sanitizer_print_stack_trace ../../../../gcc-trunk/libsanitizer/asan/asan_stack.cpp:87
#1 0x408dc4 in my_malloc fuzz/test-corpus.c:114
#2 0x7faae99f2430 in CRYPTO_zalloc crypto/mem.c:230
#3 0x7faae97f09e5 in ASN1_STRING_type_new crypto/asn1/asn1_lib.c:341
#4 0x7faae98118f7 in asn1_primitive_new crypto/asn1/tasn_new.c:318
#5 0x7faae9812401 in asn1_item_embed_new crypto/asn1/tasn_new.c:78
#6 0x7faae9812401 in asn1_template_new crypto/asn1/tasn_new.c:240
#7 0x7faae9812315 in asn1_item_embed_new crypto/asn1/tasn_new.c:137
#8 0x7faae9812315 in asn1_template_new crypto/asn1/tasn_new.c:240
#9 0x7faae9812a54 in asn1_item_embed_new crypto/asn1/tasn_new.c:137
#10 0x7faae9812a54 in ASN1_item_ex_new crypto/asn1/tasn_new.c:39
#11 0x7faae980be51 in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:325
#12 0x7faae980c813 in asn1_template_noexp_d2i crypto/asn1/tasn_dec.c:611
#13 0x7faae980d288 in asn1_template_ex_d2i crypto/asn1/tasn_dec.c:518
#14 0x7faae980b9ce in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:382
#15 0x7faae980caf5 in asn1_template_noexp_d2i crypto/asn1/tasn_dec.c:643
#16 0x7faae980d7d3 in asn1_template_ex_d2i crypto/asn1/tasn_dec.c:494
#17 0x7faae980b9ce in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:382
#18 0x7faae980dd1f in ASN1_item_ex_d2i crypto/asn1/tasn_dec.c:124
#19 0x7faae980de35 in ASN1_item_d2i crypto/asn1/tasn_dec.c:114
#20 0x40712c in FuzzerTestOneInput fuzz/asn1.c:301
#21 0x40893b in testfile fuzz/test-corpus.c:182
#22 0x406b86 in main fuzz/test-corpus.c:226
#23 0x7faae8eb1f44 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21f44)
AddressSanitizer:DEADLYSIGNAL
=================================================================
==1194==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x7faae9b0625f bp 0x7fffffe41a00 sp 0x7fffffe41920 T0)
==1194==The signal is caused by a READ memory access.
==1194==Hint: address points to the zero page.
#0 0x7faae9b0625f in crl_cb crypto/x509/x_crl.c:258
#1 0x7faae9811255 in asn1_item_embed_free crypto/asn1/tasn_fre.c:113
#2 0x7faae9812a65 in asn1_item_embed_new crypto/asn1/tasn_new.c:150
#3 0x7faae9812a65 in ASN1_item_ex_new crypto/asn1/tasn_new.c:39
#4 0x7faae980be51 in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:325
#5 0x7faae980c813 in asn1_template_noexp_d2i crypto/asn1/tasn_dec.c:611
#6 0x7faae980d288 in asn1_template_ex_d2i crypto/asn1/tasn_dec.c:518
#7 0x7faae980b9ce in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:382
#8 0x7faae980caf5 in asn1_template_noexp_d2i crypto/asn1/tasn_dec.c:643
#9 0x7faae980d7d3 in asn1_template_ex_d2i crypto/asn1/tasn_dec.c:494
#10 0x7faae980b9ce in asn1_item_embed_d2i crypto/asn1/tasn_dec.c:382
#11 0x7faae980dd1f in ASN1_item_ex_d2i crypto/asn1/tasn_dec.c:124
#12 0x7faae980de35 in ASN1_item_d2i crypto/asn1/tasn_dec.c:114
#13 0x40712c in FuzzerTestOneInput fuzz/asn1.c:301
#14 0x40893b in testfile fuzz/test-corpus.c:182
#15 0x406b86 in main fuzz/test-corpus.c:226
#16 0x7faae8eb1f44 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21f44)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV crypto/x509/x_crl.c:258 in crl_cb
==1194==ABORTING
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18360)
Don't Overflow when printing Thawte Strong Extranet Version
When printing human readable info on the Thawte Strong Extranet extension
the version number could overflow if the version number == LONG_MAX. This
is undefined behaviour.
Issue found by OSSFuzz.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13452)
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18347)
Daniel Fiala [Tue, 10 May 2022 08:46:37 +0000 (08:46 +0000)]
s_serve: Report an error if init-connection fails without an attempt to read.
Fixes: openssl#18047. Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18283)
Fix leakage when the cacheline is 32-bytes in CBC_MAC_ROTATE_IN_PLACE
rotated_mac is a 64-byte aligned buffer of size 64 and rotate_offset is secret.
Consider a weaker leakage model(CL) where only cacheline base address is leaked,
i.e address/32 for 32-byte cacheline(CL32).
Previous code used to perform two loads
1. rotated_mac[rotate_offset ^ 32] and
2. rotated_mac[rotate_offset++]
which would leak 2q + 1, 2q for 0 <= rotate_offset < 32
and 2q, 2q + 1 for 32 <= rotate_offset < 64
The proposed fix performs load operations which will always leak 2q, 2q + 1 and
selects the appropriate value in constant-time.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18050)
Allan Jude [Fri, 19 Nov 2021 19:06:52 +0000 (19:06 +0000)]
1_1_1-stable: Detect arm64-*-*bsd and enable assembly optimizations
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17085)
This fixes an internal error alert from the server and
an unexpected connection failure in the release version,
but a failed assertion and a server crash in the
debug version.
Reproduce this issue with a DTLS server/client like that:
At this point the dtls server needs to be restarted,
because verify_cookie_callback always fails, because
the previous cookie is checked against the current one.
The reason for this is not fully understood.
In wireshark we see the following each time:
c->s Client Hello (without cookie)
s->c Hello Verify Request (with new cookie)
s->c Alert (Level: Fatal, Description: Handshake Failure)
c->s Client Hello (echoes new cookie)
The client gives up when the Alert arrives.
The Alert is triggered because the server calls
verify_cookie_callback with the previous cookie,
although it just sent the current cookie in the
Hello Verify Request.
However this does only happen because no Alert message
is sent when the client re-connects the session with
the missing -maxfraglen option.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18094)
Even though the function is not part of the public api, it is not
entirely removed, in order to minimize the chance of breakage,
because it is exported from libcrypto. Instead, we keep a dummy
implementation.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17975)
err: fix crash in ERR_load_strings() when configured with no-err
This commit removes the entire initialization and cleanup of the
error string hash table (`int_error_hash`) if `no-err` is configured.
The only operative function remaining is `ERR_get_next_error_library()`.
That is the reason why the `err_string_lock` and hence the
`do_err_strings_init()` function can't be removed entirely.
Fixes #17971
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17975)
Juergen Christ [Wed, 23 Mar 2022 12:26:13 +0000 (13:26 +0100)]
s390x: Hide internal cpuid symbol and function
The symbol OPENSSL_s390xcap_P and the OPENSSL_cpuid_setup function are not
exported by the version script of OpenSSL. However, if someone uses the
static library without the version script, these symbols all of a sudden
become global symbols and their usage in assembler code does not correctly
reflect that for PIC. Since these symbols should never be used outside of
OpenSSL, hide them inside the binary.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17946)
The assert added cannot ever fail because (current & 0xFFFF) != 0 from the
while loop and the trailing zero bit count therefore cannot be as large as 32.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/17892)
Tomas Mraz [Wed, 16 Mar 2022 11:09:52 +0000 (12:09 +0100)]
eng_dyn: Avoid spurious errors when checking for 3.x engine
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17902)
Todd Short [Wed, 9 Mar 2022 22:05:45 +0000 (17:05 -0500)]
DOC: TLS compression is disabled by default
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17854)
Hugo Landau [Thu, 3 Mar 2022 17:27:23 +0000 (17:27 +0000)]
Fix issue where OBJ_nid2obj doesn't always raise an error
This was previously fixed in 3.0 but not 1.1.
Fixes #13008.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17808)
Hugo Landau [Fri, 4 Mar 2022 06:28:57 +0000 (06:28 +0000)]
Document bug in openssl cms -binary
Documents a bug in openssl cms -binary for 1.1 whereby it cannot process
input using LF line endings correctly. Binary input processing was
reworked substantially for 3.0 and backporting these changes doesn't
appear reasonable.
Fixes #17797.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17810)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17791)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17791)
Nicola Tuveri [Tue, 22 Feb 2022 12:47:11 +0000 (14:47 +0200)]
[ssl] Prefer SSL_k(EC)?DHE to the SSL_kE(EC)?DH alias
`SSL_kECDHE` and `SSL_kEECDH`, and `SSL_kDHE` and `SSL_kEDH` are already
marked as aliases of each other in the headers.
This commit, for each pair, replaces the leftover uses of the latter
synonym with the first one, which is considered more common.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17791)
Hugo Landau [Tue, 1 Mar 2022 14:08:12 +0000 (14:08 +0000)]
Fix NULL pointer dereference for BN_mod_exp2_mont
This fixes a bug whereby BN_mod_exp2_mont can dereference a NULL pointer
if BIGNUM argument m represents zero.
Regression test added. Fixes #17648. Backport from master to 1.1.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Todd Short <todd.short@me.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17787)
Jiasheng Jiang [Mon, 21 Feb 2022 01:51:54 +0000 (09:51 +0800)]
crypto/x509/v3_utl.c: Add missing check for OPENSSL_strndup
Since the potential failure of memory allocation, it
should be better to check the return value of the
OPENSSL_strndup(), like x509v3_add_len_value().
And following the comment of 'if (astrlen < 0)',
return -1 if fails.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17737)
Bernd Edlinger [Sun, 16 Jan 2022 16:59:17 +0000 (17:59 +0100)]
Check for presence of 3.x openssl runtime
if the newly loaded engine contains the symbol
EVP_PKEY_get_base_id, we know it is linked to 3.x openssl.
Abort loading this engine, as it will definitely crash.
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17541)
Bernd Edlinger [Mon, 22 Nov 2021 20:50:04 +0000 (21:50 +0100)]
Prevent crash with engine using different openssl runtime
This problem happens usually because an application
links libcrypto and/or libssl statically which
installs an atexit handler, but later an engine using
a shared instance of libcrypto is installed.
The problem is in simple words that both instances
of libcrypto have an atexit handler installed,
but both are unable to coordinate with each other,
which causes a crash, typically a use-after-free
in the engine's destroy function.
Work around that by preventing the engine's
libcrypto to install the atexit handler.
This may result in a small memory leak, but that
memory is still reachable.
Fixes #15898
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17541)
Richard Levitte [Fri, 4 Feb 2022 13:43:18 +0000 (14:43 +0100)]
Don't link test/ec_internal_test with libapps.a
It's not at all necessary, and on some platforms, it's disruptive
(leads to unresolved symbols because of object files that get included
in the link that depend on libssl).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17637)
To get the master branch compiled with DJGPP some minor
adjustments are required. They will have no impact on any other ports.
The DJGPP port uses the Watt-32 library to provide the required network
functionality and some of its headers need to be included.
Neither DJGPP nor the Watt-32 library provide in_addr_t thus it must be
provided as it is done for OPENSSL_SYS_WINDOWS in crypto/bio/b_addr.c.
In the DJGPP section of include/internal/sockets.h the following Watt-32
headers must be added:
- arpa/inet.h: to provide declaration of inet_ntoa required in crypto/bio/b_addr.c
- netinet/tcp.h: to provide defintion of TCP_NODELAY required in crypto/bio/b_sock2.c
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17623)
Matt Caswell [Thu, 30 Dec 2021 16:37:06 +0000 (16:37 +0000)]
Ensure X509_STORE_CTX_purpose_inherit handles a 0 default purpose
The function X509_STORE_CTX_purpose_inherit() can be called with a 0
default purpose. If the main purpose was set to X509_PURPOSE_ANY this
would case the function to incorrectly return an error response.
Fixes #17367
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/17604)
Peiwei Hu [Tue, 4 Jan 2022 01:10:32 +0000 (09:10 +0800)]
apps/passwd.c: free before error exiting
use goto instead of returning directly while error handling
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com> Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17404)
* Evaluating code-refs in Configure can sometimes set the default
variable `$_`
* Prevent spillage influencing the target property by using named
variable in loop
CLA: trivial
Fixes gh-17321
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17322)
Bernd Edlinger [Wed, 8 Dec 2021 13:14:48 +0000 (14:14 +0100)]
Fix a deadlock in OBJ_NAME_add
This happened after an out of memory error:
CRYPTO_THREAD_write_lock may hang in OBJ_NAME_add.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17236)
projects / thirdparty / openssl.git / log
