Rusty Newton [Tue, 9 Sep 2014 20:01:11 +0000 (20:01 +0000)]
Sounds/BuildSystem: Modifications to include new releases and Japanese language.
Modifying Makefile and sounds.xml to include new core 1.4.26 and extra 1.4.15
sound prompt releases, plus the new Japanese core sound prompts contributed
by QLOOG.
ASTERISK-23324
Reported by: Kevin McCoy
Tested by: Rusty Newton
........
Merged revisions 422789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 422790 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422791 from http://svn.asterisk.org/svn/asterisk/branches/12
Mark Michelson [Mon, 8 Sep 2014 17:52:53 +0000 (17:52 +0000)]
Add sample configuration for resource lists.
On review /r/3977, it was recommended to note in the
sample configuration about the size limitation for
resource lists. However, since there was no section in
the sample configuration at all for resource list
subscriptions, I decided to make a separate commit
where I have added the necessary sample configuration
as well as the size limitation warning.
Mark Michelson [Mon, 8 Sep 2014 17:33:24 +0000 (17:33 +0000)]
Pre-allocate transmission data buffer for RLS NOTIFY requests.
PJSIP, unless a constant is modified at compilation time, limits
SIP requests to 4000 bytes. Full-state RLS notifications can easily
exceed this limit with moderately small lists.
This changeset allows for Asterisk to work around this size limit by
performing its own allocation of the transmission data buffer. This
way, Asterisk can allocate a buffer that exceeds the built-in maximum.
We still impose our own limit of 64000 bytes, mainly because making
allocations larger than that is a bit absurd.
Jonathan Rose [Mon, 8 Sep 2014 15:41:25 +0000 (15:41 +0000)]
res_pjsip_pubsub: Check supported headers for eventlist when subscribing to
resource list
https://wiki.asterisk.org/wiki/display/AST/Resource+List+Subscription+Test+Plan
According to the off-nominal plan, if evenlist support is not specified in a
SUBSCRIBE's supported header(s), that subscription should be rejected with an
error.
ASTERISK-23871
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3960/diff/#index_header
Matthew Jordan [Sat, 6 Sep 2014 22:49:43 +0000 (22:49 +0000)]
main/cdr: Copy over location information during a fork
When a CDR is forked, a new CDR is created and appended to the CDR chain for
the Party A. The forked CDR starts life off as a clone of the last
non-finalized for the particular Party A. In the past, merely copying over
the snapshots for Party A/Party B would be sufficient. However, as the CDRs
now contain cached information from Party A - specifically application/data,
context, and extension - we need to copy that over during a fork as well.
Huzzah for unit tests catching this when the context/extension were derived
from a cached value on the CDR instead of on Party A.
........
Merged revisions 422769 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Sat, 6 Sep 2014 22:21:17 +0000 (22:21 +0000)]
main/rtp_engine: Format NTP timestamps as unsigned ints
On some systems, a timeval's tv_sec/tv_usec will be unsigned lont ints, as
opposed to long ints. When the RTP engine formats these as strings, it was
previously formatting them as signed integers, which can result in some
odd negative timestamp values (particularly on 32-bit systems). This patch
formats the values as unsigned long integers.
........
Merged revisions 422766 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Fri, 5 Sep 2014 22:03:45 +0000 (22:03 +0000)]
main/cdrs: Preserve context/extension when executing a Macro or GoSub
The context/extension in a CDR is generally considered the destination of a
call. When looking at a 2-party call CDR, users will typically be presented
with the following:
This generally makes the context/exten fields less than useful.
It isn't hard to preserve these values in the CDR state machine; however, we
need to have something that informs us when a channel is executing a
subroutine. Prior to this patch, there isn't anything that does this.
This patch solves this problem by adding a new channel flag,
AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
Macro or a GoSub. The CDR engine looks for this value when updating a Party A
snapshot; if the flag is present, we don't override the context/exten on the
main CDR object. In a funny quirk, executing a hangup handler must *not* abide
by this logic, as the endbeforehexten logic assumes that the user wants to see
data that occurs in hangup logic, which includes those subroutines. Since
those execute outside of a typical Dial operation (and will typically have
their own dedicated CDR anyway), this is unlikely to cause any heartburn.
Review: https://reviewboard.asterisk.org/r/3962/
ASTERISK-24254 #close
Reported by: tm1000, Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Fri, 5 Sep 2014 21:55:27 +0000 (21:55 +0000)]
main/cdr: Fix crash/memory consumption in CDRs in multi-party bridge scenarios
This patch fixes an issue where CDRs would get stuck generating an infinite
number of CDRs, eventually crashing Asterisk (and consuming a lot of memory
along the way).
When a channel enters into a multi-party bridge, the CDR engine creates
mappings of each participant to each other participant, picking the 'A' party
as it goes. So, if we have four channels in a multi-party bridge (Alice, Bob,
Charlie, Denise), we would have something like:
Alice => Bob
Alice => Charlie
Alice => Denise
Bob => Charlie
Bob => Denise
Charlie => Denise
This works fine when participants enter the bridge a single time.
When a participant leaves a bridge, the CDRs for that channel are transitioned
to a finalized state.
The bug occurs if Bob rejoins. When the CDR engine creates mappings between the
channels, it walks through all the participants currently in the bridge, and
realizes that no one in the bridge can create a CDR with the channel (Bob).
As such it creates a new CDR for the candidate and appends it to that
candidate's chain. Unfortunately, on this particular code path, it doesn't
stop traversing the candidate's chain. Since we just added ourselves to the
chain, this causes the loop to keep going, constantly adding new CDRs.
This patch makes it so the engine bails when it creates a CDR match in this
case.
Richard Mudgett [Fri, 5 Sep 2014 20:35:37 +0000 (20:35 +0000)]
func_channel.c: Add missing locking to some CHANNEL() requests.
* The CHANNEL() audionativeformat, videonativeformat, audioreadformat, and
audiowriteformat now need locking since the media format rework when
accessing the channel's format pointers.
* Increased the buffer size for CHANNEL() audionativeformat and
videonativeformat output strings since the allow=all can be a lengthy
list.
* Tweaked the CHANNEL() XML documentation for secure_bridge_signaling,
secure_bridge_media, and state.
* Ensured the output buffer is initialized for secure_bridge_signaling and
secure_bridge_media.
* Made use the locked_copy_string() macro instead of inlining it for trace
and checkhangup.
Jonathan Rose [Fri, 5 Sep 2014 20:11:35 +0000 (20:11 +0000)]
Dial API: Add a dial option to indicate the dialed channel will replace dialer
Adds an option to the dial API that marks an outgoing dial as replacing the dialing channel for the purpose of propagating accountcode. When it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on the involved channels with ast_channel_req_accountcodes.
Kinsey Moore [Fri, 5 Sep 2014 13:28:13 +0000 (13:28 +0000)]
Menuselect: Fix incorrect enabling on failed deps
This corrects a situation where menuselect can incorrectly enable a
module by default that has defaultenabled set to "no" and has
failed/non-selected dependencies. The bug is due to an inverted test
when checking for whether the given module should be set to enabled by
default on load.
Review: https://reviewboard.asterisk.org/r/3975/
Reported by: John Bigelow
Mark Michelson [Tue, 2 Sep 2014 20:29:09 +0000 (20:29 +0000)]
Resolve race condition where channels enter dialplan application before media has been negotiated.
Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
negotiated. This is because session supplements are called into before PJSIP's
inv_session code has told us that media has been updated. Sometimes the queued answer
frame is handled by the PBX thread before the ensuing media negotiations occur, causing
a test failure.
As it turns out, there is another place that session supplements could be called into, which is
after media has finished getting negotiated. What this commit introduces is a means for session
supplements to indicate when they wish to be called into when handling an incoming SIP response.
By default, all session supplements will be run at the same point that they were prior to this
commit. However, session supplements may indicate that they wish to be handled earlier than
normal on redirects, or they may indicate they wish to be handled after media has been negotiated.
In this changeset, two session supplements have been updated to indicate a preference for when
they should be run: res_pjsip_diversion executes before handling redirection in order to get
information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
media negotiation to fix the race condition mentioned previously.
Matthew Jordan [Mon, 1 Sep 2014 14:14:40 +0000 (14:14 +0000)]
res_stasis: Don't play MoH to channels by default when added to holding bridges
When ARI manipulates a bridge, it generally doesn't care what the mixing
technology is. Operations on a bridge initiated through ARI should perform
their action in generally the same way, regardless of the bridge's mixing
technology. While the mixing technology may determine how media flows to
channels, the actual operations on a bridge themselves should be the same.
Currently, this isn't the case with holding bridges. When a channel joins
without a role, MoH is started on that channel automatically. Subsequent bridge
operations that would stop MoH would fail (as there is no Announcer channel
playing MoH to the bridge). Starting MoH on the bridge will also create two
MoH streams: one from the MoH being played on the participant channel, and one
from the announcer channel. From the perspective of ARI users, this is
counter-intuitive - I would not expect MoH to be started for me. The mixing
technology determines how media is shared between participants, not the
application experience.
This patch does the following:
* The Stasis bridge class now inspects channels as they are going into a
bridge. If the bridge has a holding capability, and the channel has no
roles, we give it a participant role and mark the default behaviour to have
no entertainment. This allows addChannel operations to continue to set a
participant role with an entertainment option if it felt like it (or could
do it).
* The music on hold channel is now Stasis approved (tm)
Review: https://reviewboard.asterisk.org/r/3929/
ASTERISK-24264 #close
Reported by: Samuel Galarneau
Tested by: Samuel Galarneau
........
Merged revisions 422503 from http://svn.asterisk.org/svn/asterisk/branches/12
George Joseph [Sat, 30 Aug 2014 17:32:17 +0000 (17:32 +0000)]
confbridge: Add Duration to ConfbridgeList event
The ConfbridgeList event doesn't include how long the user has been a
member of the conference. This patch adds Duration (seconds) which
is based on user->chan->answertime.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3955/
........
Merged revisions 422444 from http://svn.asterisk.org/svn/asterisk/branches/12
George Joseph [Sat, 30 Aug 2014 17:24:02 +0000 (17:24 +0000)]
manager: Make WaitEvent action respect eventfilters
A WaitEvent issued via an http session isn't respecting eventfilters defined
for the user. I just added a match_filter to the predicate that controls
astman_append.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3958/
........
Merged revisions 422439 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 422440 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422441 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Fri, 29 Aug 2014 19:40:09 +0000 (19:40 +0000)]
doc: Add a manpage for the smsq utility
This patch adds a manpage for the smsq utility. Note that this is one of
the patches the Debian distro applies for the Asterisk project, as per
ASTERISK-24191.
Review: https://reviewboard.asterisk.org/r/3895/
ASTERISK-24171 #close
Reported by: Jeremy Laine
patches:
smsq.8 uploaded by Jeremy Laine (License 6561)
........
Merged revisions 422376 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 422377 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422378 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Fri, 29 Aug 2014 19:35:02 +0000 (19:35 +0000)]
doc: Add a manpage for the aelparse utility
This patch adds a manpage for the aelparse utility. Note that this is one of
the patches the Debian distro applies for the Asterisk project, as per
ASTERISK-24191.
Review: https://reviewboard.asterisk.org/r/3896/
ASTERISK-24171 #close
Reported by: Jeremy Laine
patches:
aelparse.8 uploaded by Jeremy Laine (License 6561)
........
Merged revisions 422371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 422372 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422373 from http://svn.asterisk.org/svn/asterisk/branches/12
The assertion that peer was not found on final event
message was being triggered on configuration reload.
This patch changes that case to just return instead.
Matthew Jordan [Thu, 28 Aug 2014 21:54:12 +0000 (21:54 +0000)]
LICENSE: Clarify language in Asterisk's LICENSE to allow for linking to UniMRCP
The UniMRCP project distributes Asterisk modules that integrate Asterisk with
UniMRCP, and other Asterisk users use the UniMRCP library as well.
Unfortunately, the UniMRCP license is Apache 2.0, which per the Free Software
Foundation, is not a compatible license with the GPLv2.
"Please note that this license is not compatible with GPL version 2, because it
has some requirements that are not in that GPL version. These include certain
patent termination and indemnification provisions. The patent termination
provision is a good thing, which is why we recommend the Apache 2.0 license for
substantial programs over other lax permissive licenses."
On the other hand, UniMRCP is a great project and we'd like to let people use
it with Asterisk.
This patch updates the LICENSE text to allow users to link Asterisk with
UniMRCP and distribute the resulting binaries.
........
Merged revisions 422293 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 422294 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422295 from http://svn.asterisk.org/svn/asterisk/branches/12
Michael L. Young [Thu, 28 Aug 2014 20:30:54 +0000 (20:30 +0000)]
chan_iax2: Fix Dynamic IAX2 Registrations After Temporary DNS Failure
The reporter on the issue found some issues when upgrading from version 10 to 11
on 55 hosts.
Two situations that can occur with dynamic registrations.
1. With dnsmgr disabled, if the host is not resolvable we are not trying to
resolve the host again when it is time to attempt to register again. This
results in never registering to the host.
2. With dnsmgr enabled, when the host is temporarily not resolvable the
address is set to 0.0.0.0:0 and then when the host is resolvable the port
is not being restored and stays set to 0.
This patch resolves these two issues by:
* Storing the hostname so that it can be used for resolving with DNS.
* Resolve the hostname on the next scheduled attempt to register.
* Storing the port used to reach the host so that when the hostname is
resolvable again, we can set the port again if the port is still unset after
looking up the host.
ASTERISK-23767 #close
Reported by: David Herselman
Tested by: David Herselman, Michael L. Young
Patches:
asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
uploaded by Michael L. Young (license 5026)
Mark Michelson [Thu, 28 Aug 2014 15:49:44 +0000 (15:49 +0000)]
Fix bug that did not allow for multiple batched RLS notifications to be sent.
A misunderstanding of how the scheduler worked caused further batched notifications
beyond the first not to get scheduled. Now we reset our scheduler ID to -1 after
the batched notification is sent. This way, further notifications can be scheduled
when they arise.
George Joseph [Wed, 27 Aug 2014 17:29:51 +0000 (17:29 +0000)]
confbridge: Add 'Admin' param to join, leave, mute, unmute and talking events
Currently there's no way to tell if a user is an admin or not when receiving
the join, leave, mute, unmute and talking events. This patch adds that
capability.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3950/
........
Merged revisions 422176 from http://svn.asterisk.org/svn/asterisk/branches/12
Kinsey Moore [Wed, 27 Aug 2014 15:31:35 +0000 (15:31 +0000)]
CallerID: Fix parsing of malformed callerid
This allows the callerid parsing function to handle malformed input
strings and strings containing escaped and unescaped double quotes.
This also adds a unittest to cover many of the cases where the parsing
algorithm previously failed.
George Joseph [Tue, 26 Aug 2014 23:28:51 +0000 (23:28 +0000)]
confbridge: Make kick, mute and unmute handle channel targets consistently.
Kick, mute and unmute were a little inconsistent in their handling of channel
targets. This patch cleans that up by insuring they all handle the 'all'
target consistently and adds the 'participants' target which acts on
non-admins. Documentation for kick was also cleaned up as it never
supported partial channel names.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3944/
........
Merged revisions 422090 from http://svn.asterisk.org/svn/asterisk/branches/12
Mark Michelson [Tue, 26 Aug 2014 22:13:57 +0000 (22:13 +0000)]
Fix race condition in the scheduler when deleting a running entry.
When scheduled tasks run, they are removed from the heap (or hashtab).
When a scheduled task is deleted, if the task can't be found in the
heap (or hashtab), an assertion is triggered. If DO_CRASH is enabled,
this assertion causes a crash.
The problem is, sometimes it just so happens that someone attempts
to delete a scheduled task at the time that it is running, leading
to a crash. This change corrects the issue by tracking which task
is currently running. If that task is attempted to be deleted,
then we mark the task, and then wait for the task to complete.
This way, we can be sure to coordinate task deletion and memory
freeing.
Richard Mudgett [Mon, 25 Aug 2014 16:13:45 +0000 (16:13 +0000)]
res_musiconhold: Fix MOH restarting where it left off from the last hold.
Restore code removed by https://reviewboard.asterisk.org/r/3536/ that
introduced a regression that prevents MOH from restarting were it left off
the last time.
ASTERISK-24019 #close
Reported by: Jason Richards
Patches:
jira_asterisk_24019_v1.8.patch (license #5621) patch uploaded by rmudgett
Joshua Colp [Sun, 24 Aug 2014 19:36:05 +0000 (19:36 +0000)]
res_pjsip_transport_websocket: Attach the Websocket module on outgoing INVITEs.
In order to alter the Contact header on in-dialog requests and responses the
Websocket module must be attached on outgoing INVITEs. The Contact header is
modified so that the PJSIP transport layer can find and use the existing
Websocket connection based on the source IP address, port, and transport.
ASTERISK-24143 #close
Reported by: Aleksei Kulakov
........
Merged revisions 421955 from http://svn.asterisk.org/svn/asterisk/branches/12
Joshua Colp [Sun, 24 Aug 2014 19:20:24 +0000 (19:20 +0000)]
res_pjsip_transport_websocket: Fix a progressive memory growth.
The packet structure used to receive messages was using the transport
pool. This meant that for each parsing the pool would grow accordingly.
Since memory can not be reclaimed without resetting it this would
cause the memory pool to grow and grow.
This change uses a specific memory pool for the packet structure and
resets it to a fresh state after the message has been received and
handled.
........
Merged revisions 421939 from http://svn.asterisk.org/svn/asterisk/branches/12
Joshua Colp [Sun, 24 Aug 2014 18:53:06 +0000 (18:53 +0000)]
res_pjsip_transport_websocket: Ensure secure Websocket clients can be called.
This change enforces the transport in the Contact header for Websocket clients.
Previously a client may provide a transport of 'ws' when it is actually using
a transport of 'wss'. This would cause outgoing calls to fail as the existing
connection could not be found.
........
Merged revisions 421931 from http://svn.asterisk.org/svn/asterisk/branches/12
Joshua Colp [Sun, 24 Aug 2014 17:21:38 +0000 (17:21 +0000)]
chan_sip: Use the server reflexive ICE candidate RTCP port as provided.
This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
Mark Michelson [Thu, 21 Aug 2014 21:42:50 +0000 (21:42 +0000)]
Switch from hostname to an IP address in the SDP origin line.
Using the hostname in the SDP origin line may not satisfy the requirement
of RFC 4566 that we use a FQDN or IP address. This change has us use the
same information from the SDP connection line if possible. If not possible,
we'll use the configured media address. And if that's not possible, we use
the result of a PJLIB call to get the IP address of ourself.
Mark Michelson [Thu, 21 Aug 2014 21:36:00 +0000 (21:36 +0000)]
Ensure after-bridge behavior is correct when moving from Stasis to a non-Stasis bridge.
Because of the departable state of channels that enter Stasis bridges, Stasis has to
take responsibility for directing the channel to its intended after-bridge destination
if the channel moves from a Stasis bridge to a non-Stasis bridge. This change ensures
that when such a move occurs, when the channel leaves the bridging system, any after
bridge gotos are honored.
Jonathan Rose [Thu, 21 Aug 2014 21:25:07 +0000 (21:25 +0000)]
res_musiconhold: Fix reference leaks caused when reloading with REF_DEBUG set
Due to a faulty function for debugging reference decrementing, it was possible
to reduce the refcount on the wrong object if two moh classes of the same name
were in the moh class container.
(closes issue ASTERISK-22252)
Reported by: Walter Doekes
Patches:
18_moh_debug_ref_patch.diff Uploaded by Jonathan Rose (license 6182)
........
Merged revisions 398937 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421777 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421779 from http://svn.asterisk.org/svn/asterisk/branches/12
Mark Michelson [Thu, 21 Aug 2014 21:18:21 +0000 (21:18 +0000)]
Improve consistency of party ID privacy usage.
Prior to this change, the Remote-Party-ID header took the position of
"If caller name and number are not explicitly allowed, then they are private"
and P-Asserted-Identity took the position of
"Caller name and number are only private if marked explicitly so"
Now both mechanisms of conveying party identification use the former approach.
........
Merged revisions 421778 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Thu, 21 Aug 2014 17:34:43 +0000 (17:34 +0000)]
chan_sip: Don't use port derived from fromdomain if it isn't set
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Matthew Jordan [Thu, 21 Aug 2014 15:24:09 +0000 (15:24 +0000)]
ARI: Fix implicit answer when playback is initiated on unanswered channel
When issuing a POST /channels/{channel_id}/play on a channel that is not
yet answered, ARI is supposed to:
* Queue up an AST_CONTROL_PROGRESS on the channel
* Start up the playback of the media
Instead, we sneak an answer on the channel right before starting playing media.
This is due to ARI's usage of control_streamfile. This function implicitly
answers the channel (and doesn't give ARI the option to stop it). The answering
of the channel here is probably unnecessary:
* app_voicemail, by far the biggest consumer of this function, always answers
the channels anyway
* control stream file (in res_agi) and ControlPlayback probably shouldn't be
implicitly answering the channel. Answering should not be tied directly to
playing back media.
As it turns out, the answering of the channel here is pretty old:
356042 twilson if (ast_channel_state(chan) != AST_STATE_UP) {
3087 anthm res = ast_answer(chan);
180259 tilghman }
(As in, ancient?)
Note that others ran into this problem and commented about it on various
mailing lists.
Review: https://reviewboard.asterisk.org/r/3907/
ASTERISK-24229 #close
Reported by: Matt Jordan
........
Merged revisions 421695 from http://svn.asterisk.org/svn/asterisk/branches/12
Richard Mudgett [Wed, 20 Aug 2014 22:49:32 +0000 (22:49 +0000)]
chan_pjsip: Update media translation paths when new SDP negotiated.
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
Richard Mudgett [Wed, 20 Aug 2014 22:21:43 +0000 (22:21 +0000)]
cli.c: Fix tab completion of "module load" when MALLOC_DEBUG is enabled.
filename_completion_function() returns memory that was not allocated by
the MALLOC_DEBUG allocation tracker so the memory must be freed by
ast_std_free().
........
Merged revisions 421600 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421602 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421608 from http://svn.asterisk.org/svn/asterisk/branches/12
Mark Michelson [Wed, 20 Aug 2014 20:04:08 +0000 (20:04 +0000)]
Move evaluation of set_var options in pjsip to the end of channel initialization.
This allows for set_var to override certain defaults such as caller ID and codec
values. This also fixes a test suite regression. The "set_var" test suite test attempted
to use set_var to override caller ID, but a recent change caused that to no longer work.
........
Merged revisions 421565 from http://svn.asterisk.org/svn/asterisk/branches/12
Kinsey Moore [Wed, 20 Aug 2014 13:04:30 +0000 (13:04 +0000)]
Stasis: Add information to blind transfer event
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
Jonathan Rose [Tue, 19 Aug 2014 16:28:31 +0000 (16:28 +0000)]
ARI: Fix a bug where /channels/{channelID}/continue doesn't execute PBX
If /channels/{channelID}/continue is called on a channel that was originated
without a PBX (such as the ARI command POST channel with a stasis application
argument), the channel will not start dialplan execution. This patch will now
run the PBX out of the stasis execution if the channel doesn't currently have
an active PBX upon continuing.
Richard Mudgett [Tue, 19 Aug 2014 16:11:38 +0000 (16:11 +0000)]
chan_pjsip: Fix attended transfer connected line name update.
A calls B
B answers
B SIP attended transfers to C
C answers, B and C can see each other's connected line information
B completes the transfer
A has number but no name connected line information about C
while C has the full information about A
I examined the incoming and outgoing party id information handling of
chan_pjsip and found several issues:
* Fixed ast_sip_session_create_outgoing() not setting up the configured
endpoint id as the new channel's caller id. This is why party A got
default connected line information.
* Made update_initial_connected_line() use the channel's CALLERID(id)
information. The core, app_dial, or predial routine may have filled in or
changed the endpoint caller id information.
* Fixed chan_pjsip_new() not setting the full party id information
available on the caller id and ANI party id. This includes the configured
callerid_tag string and other party id fields.
* Fixed accessing channel party id information without the channel lock
held.
* Fixed using the effective connected line id without doing a deep copy
outside of holding the channel lock. Shallow copy string pointers can
become stale if the channel lock is not held.
* Made queue_connected_line_update() also update the channel's
CALLERID(id) information. Moving the channel to another bridge would need
the information there for the new bridge peer.
* Fixed off nominal memory leak in update_incoming_connected_line().
* Added pjsip.conf callerid_tag string to party id information from
enabled trust_inbound endpoint in caller_id_incoming_request().
George Joseph [Mon, 18 Aug 2014 20:19:42 +0000 (20:19 +0000)]
func_config: Change 'Not Found' message from ERROR to DEBUG
When you call the CONFIG dialplan function with the name of a variable that
doesn't exist in the target context you get an ERROR. This does nothing but
clutter up the logs with messages that may be perfectly acceptable. Just
because a variable wasn't in the context doesn't mean it's an error. Maybei
t's optional or just needs to be defaulted or ignored.
This patch changes the log level from ERROR to DEBUG. If a dialplan developer
wants to debug their dialplan they still canby setting the console debug level
as needed.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3919/
........
Merged revisions 421327 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421328 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421329 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Mon, 18 Aug 2014 01:11:28 +0000 (01:11 +0000)]
res/ari/resource_channels: Don't return allocation failure on failed function
If a function fails to execute, it is most likely due to one of two reasons:
(1) The function doesn't exist or can't be read from
(2) The function is dangerous and is restricted based on the user's permissions
Currently we return allocation failure, which is incorrect. This updates the
reason code to more accurately reflect why the request failed.
Matthew Jordan [Sun, 17 Aug 2014 23:28:56 +0000 (23:28 +0000)]
apps/app_meetme: Fix crash when publishing MeetMe messages with no channel
The same function, meetme_stasis_generate_msg, handles creating and publishing
Stasis message both when there are channels in the MeetMe conference and when
there are no channels in the conference. When the performance improvement was
made to use cached snapshots, this created a situation where Asterisk would
crash: obtaining a cached snapshot is not NULL tolerant.
This patch restores the previous implementation, which used a NULL safe set
of routines to produce a blob containing the channel snapshot (if available)
and information about the MeetMe conference.
Matthew Jordan [Sun, 17 Aug 2014 23:09:43 +0000 (23:09 +0000)]
apps/app_dial: Fix Dial 'z' option
The 'z' option is supposed to disable the dial timeout in the case of a call
forward. Unfortunately, the wrong timeout timer was passed to the do_forward
function, resulting in the option not working.
Matthew Jordan [Sun, 17 Aug 2014 22:34:19 +0000 (22:34 +0000)]
configure: Undefine FORTIFY_SOURCE prior to defining it for patched gcc
Some distributions of Linux patch gcc to define FORTIFY_SOURCE when gcc is
executed with optimization. This "help" unfortunately results in re-definition
warnings when FORTIFY_SOURCE is later defined in Asterisk's build system. This
patch undefines FORTIFY_SOURCE prior to defining it to prevent this warning.
Review: https://reviewboard.asterisk.org/r/3912/
ASTERISK-24032 #close
Reported by: Kilburn
Tested by: Kilburn, wdoekes
patches:
1.8.diff uploaded by cloos (License 5956)
10.diff uploaded by cloos (License 5956)
11.diff uploaded by cloos (License 5956)
12.diff uploaded by cloos (License 5956)
13.diff uploaded by cloos (License 5956)
........
Merged revisions 421227 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421228 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421229 from http://svn.asterisk.org/svn/asterisk/branches/12
Jonathan Rose [Fri, 15 Aug 2014 17:08:49 +0000 (17:08 +0000)]
Bridging: Fix a behavioral change when checking if a channel is leaving a bridge
r420934 introduced some failures in the test suite. Upon investigating, it was
discovered that differences in the way we were evaluating whether a channel was in
the process of leaving a bridge were causing some reinvites not to occur (mostly
reinvites back to Asterisk when ending a call). This patch fixes that behavioral
change.
ASTERISK-24027 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3910/
........
Merged revisions 421186 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Fri, 15 Aug 2014 15:45:27 +0000 (15:45 +0000)]
app_voicemail/app: Remove test events that were duplicated by r421059
Moving the test event raised when a file is played back (which occurred in
r421059) broke the ever loving snot out of the voicemail tests. This caused
duplicate test events to get raised, as app_voicemail and main/app were raising
events prior to call ast_streamfile. The voicemail tests did not enjoy getting
multiple events.
Since raising the playback event in ast_streamfile is far more useful to the
vast majority of tests, this patch keeps the call there and simply removes the
extraneous calls that duplicated the event.
........
Merged revisions 421125 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421164 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421165 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Thu, 14 Aug 2014 21:16:05 +0000 (21:16 +0000)]
res/res_hep_rtcp: Remove dependency on PJSIP
The res_hep_rtcp module was incorrectly including <pjsip.h>. This didn't need
to be included, as the module does not using PJPROJECT any fashion.
Unfortunately, because res_hep_rtcp did not include pjsip in its MODULEINFO as
a dependency, this also meant that res_hep_rtcp will fail to compile on a
system without PJPROJECT.
This patch removes the include.
Thanks to Damien Wedhorn for pointing this out in #asterisk-dev.
ASTERISK-24236 #close
Reported by: Damien Wedhorn, Matt Jordan
Tested by: Damien Wedhorn
........
Merged revisions 421064 from http://svn.asterisk.org/svn/asterisk/branches/12
Matthew Jordan [Thu, 14 Aug 2014 19:20:51 +0000 (19:20 +0000)]
cel: Make sure channels in extra fields include their unique IDs as well
CEL typically tracks a lot of information using the unique ID of the channel.
This is typically needed due to tying events together using the linked ID of
the various channels involved in a "call", which is derived from the channel ID
of the oldest channel involved in a bridge (or in the case of a Dial, the
parent channel).
Previously, we had updated the extra fields to include the involved channel
names, but forgot to put in the unique ID. This patch corrects that error.
........
Merged revisions 421037 from http://svn.asterisk.org/svn/asterisk/branches/12
Kinsey Moore [Wed, 13 Aug 2014 16:53:09 +0000 (16:53 +0000)]
PJSIP: Prevent crash no-URI contacts
This prevents a crash from occurring when a contact with no URI is used
for the creation of an outbound out-of-dialog request with no
associated endpoint.
........
Merged revisions 420949 from http://svn.asterisk.org/svn/asterisk/branches/12
Jonathan Rose [Wed, 13 Aug 2014 16:07:22 +0000 (16:07 +0000)]
Bridges: Fix feature interruption/unintended kick caused by external actions
If a manager or CLI user attached a mixmonitor to a call running a dynamic
bridge feature while in a bridge, the feature would be interrupted and the
channel would be forcibly kicked out of the bridge (usually ending the call
during a simple 1 to 1 call). This would also occur during any similar action
that could set the unbridge soft hangup flag, so the fix for this was to
remove unbridge from the soft hangup flags and make it a separate thing all
together.
Richard Mudgett [Tue, 12 Aug 2014 23:33:00 +0000 (23:33 +0000)]
res_stasis_snoop.c: Fix off nominial exit path leaving Snoop channel locked and not hungup.
* Made use ast_copy_string() instead of strcpy() for snoop uniqueid for
safety. There is no guarantee that the max channel uniqueid length will
remain the same as the snoop uniqueid space.
Kinsey Moore [Mon, 11 Aug 2014 18:37:14 +0000 (18:37 +0000)]
Stasis: Allow internal channels directly into bridges
The patch to catch channels being shoehorned into Stasis() via external
mechanisms also happens to catch Announcer and Recorder channels
because they aren't known to be stasis-controlled channels in the usual
sense. This marks those channels as Stasis()-internal channels and
allows them directly into bridges.
Mark Michelson [Mon, 11 Aug 2014 18:32:37 +0000 (18:32 +0000)]
Improve call forwarding reporting, especially with regards to ARI.
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Mark Michelson [Mon, 11 Aug 2014 17:38:31 +0000 (17:38 +0000)]
Fix crashing unit tests with regards to RLS.
The unit tests require a sorcery.conf file that has been
set up to store resource lists in memory rather than retrieving
from configuration.
With a setup that is not conducive to running the tests, a fault
in sorcery currently causes Asterisk to crash when attempting to
run any of the tests.
To get around the crash, this adds a function that verifies the
current environment and marks the tests as "not run" if the setup
is not correct.
Matthew Jordan [Mon, 11 Aug 2014 13:57:25 +0000 (13:57 +0000)]
res_hep: Remove disabling of modules
These modules were originally specified as being disabled, as they were
introduced midstream in Asterisk 12. That makes it nicer for folks who are
upgrading to a new release in the middle of Asterisk 12. That's not the case
for Asterisk 13: it's a brand new release. There's no reason to have the
modules disabled by default in that case.
Walter Doekes [Mon, 11 Aug 2014 10:40:10 +0000 (10:40 +0000)]
general: Fix memory Corruption in __ast_string_field_ptr_build_va.
If the space left in a stringfield is between 0 and
(alignof(ast_string_field_allocation)-1) adding new data would cause
memory corruption, because we would assume enough space (unsigned
underrun).
Thanks Arnd Schmitter for reporting and finding out the cause!
Matthew Jordan [Mon, 11 Aug 2014 00:07:22 +0000 (00:07 +0000)]
app_queue: Add RealTime support for queue rules
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
projects / thirdparty / asterisk.git / log
