Will Deacon [Fri, 22 Aug 2025 14:04:02 +0000 (15:04 +0100)]
KVM: arm64: Fix kernel BUG() due to bad backport of FPSIMD/SVE/SME fix
Upstream commit fbc7e61195e2 ("KVM: arm64: Unconditionally save+flush
host FPSIMD/SVE/SME state") relies on interrupts being disabled during
fpsimd_save_and_flush_cpu_state() so that a softirq cannot be taken
while the host floating point context is being saved and potentially try
to use kernel-mode NEON.
Unfortunately, stable kernels without 9b19700e623f ("arm64: fpsimd: Drop
unneeded 'busy' flag") leave interrupts enabled in
fpsimd_save_and_flush_cpu_state() and so the BUG_ON(!may_use_simd()) in
kernel_neon_begin() has been observed to trigger in real-world usage:
Given that 9b19700e623f ("arm64: fpsimd: Drop unneeded 'busy' flag") is
not a fix in its own right, has non-trivial dependencies and is a
reasonably invasive change to the in-kernel use of fpsimd, opt instead
for a simple fix to use the softirq-safe {get,put}_cpu_fpsimd_context()
helpers in fpsimd_save_and_flush_cpu_state().
Ensure the shadow VMCS cache is evicted during an emergency reboot to
prevent potential memory corruption if the cache is evicted after reboot.
This issue was identified through code inspection, as __loaded_vmcs_clear()
flushes both the normal VMCS and the shadow VMCS.
Avoid checking the "launched" state during an emergency reboot, unlike the
behavior in __loaded_vmcs_clear(). This is important because reboot NMIs
can interfere with operations like copy_shadow_to_vmcs12(), where shadow
VMCSes are loaded directly using VMPTRLD. In such cases, if NMIs occur
right after the VMCS load, the shadow VMCSes will be active but the
"launched" state may not be set.
Use KVM VMX's reboot/crash callback to do VMXOFF in an emergency instead
of manually and blindly doing VMXOFF. There's no need to attempt VMXOFF
if a hypervisor, i.e. KVM, isn't loaded/active, i.e. if the CPU can't
possibly be post-VMXON.
Reviewed-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20230721201859.2307736-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: a0ee1d5faff1 ("KVM: VMX: Flush shadow VMCS on emergency reboot") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide dedicated helpers to (un)register virt hooks used during an
emergency crash/reboot, and WARN if there is an attempt to overwrite
the registered callback, or an attempt to do an unpaired unregister.
Opportunsitically use rcu_assign_pointer() instead of RCU_INIT_POINTER(),
mainly so that the set/unset paths are more symmetrical, but also because
any performance gains from using RCU_INIT_POINTER() are meaningless for
this code.
Reviewed-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20230721201859.2307736-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: a0ee1d5faff1 ("KVM: VMX: Flush shadow VMCS on emergency reboot") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Work around wrapping '--ld-path' in cc-option in older stable
branches due to older minimum LLVM version] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Connections may be cleanup while waiting for the commands to complete so
this attempts to check if the connection handle remains valid in case of
errors that would lead to call hci_conn_failed:
BUG: KASAN: slab-use-after-free in hci_conn_failed+0x1f/0x160
Read of size 8 at addr ffff888001376958 by task kworker/u3:0/52
Now we have reinstated the ability to map F_SEAL_WRITE mappings read-only,
assert that we are able to do this in a test to ensure that we do not
regress this again.
Link: https://lkml.kernel.org/r/a6377ec470b14c0539b4600cf8fa24bf2e4858ae.1732804776.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Julian Orth <ju.orth@gmail.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm: reinstate ability to map write-sealed memfd mappings
read-only".
In commit 158978945f31 ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
Commit 5de195060b2e ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
This series reworks how we both permit write-sealed mappings being mapped
read-only and disallow mprotect() from undoing the write-seal, fixing this
regression.
We also add a regression test to ensure that we do not accidentally
regress this in future.
Thanks to Julian Orth for reporting this regression.
This patch (of 2):
In commit 158978945f31 ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
This was previously unnecessarily disallowed, despite the man page
documentation indicating that it would be, thereby limiting the usefulness
of F_SEAL_WRITE logic.
We fixed this by adapting logic that existed for the F_SEAL_FUTURE_WRITE
seal (one which disallows future writes to the memfd) to also be used for
F_SEAL_WRITE.
For background - the F_SEAL_FUTURE_WRITE seal clears VM_MAYWRITE for a
read-only mapping to disallow mprotect() from overriding the seal - an
operation performed by seal_check_write(), invoked from shmem_mmap(), the
f_op->mmap() hook used by shmem mappings.
By extending this to F_SEAL_WRITE and critically - checking
mapping_map_writable() to determine if we may map the memfd AFTER we
invoke shmem_mmap() - the desired logic becomes possible. This is because
mapping_map_writable() explicitly checks for VM_MAYWRITE, which we will
have cleared.
Commit 5de195060b2e ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
We reinstate this functionality by moving the check out of shmem_mmap()
and instead performing it in do_mmap() at the point at which VMA flags are
being determined, which seems in any case to be a more appropriate place
in which to make this determination.
In order to achieve this we rework memfd seal logic to allow us access to
this information using existing logic and eliminate the clearing of
VM_MAYWRITE from seal_check_write() which we are performing in do_mmap()
instead.
The seal_check_future_write() function is called by shmem_mmap() or
hugetlbfs_file_mmap() to disallow any future writable mappings of an memfd
sealed this way.
The F_SEAL_WRITE flag is not checked here, as that is handled via the
mapping->i_mmap_writable mechanism and so any attempt at a mapping would
fail before this could be run.
However we intend to change this, meaning this check can be performed for
F_SEAL_WRITE mappings also.
The logic here is equally applicable to both flags, so update this
function to accommodate both and rename it accordingly.
Link: https://lkml.kernel.org/r/913628168ce6cce77df7d13a63970bae06a526e0.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "permit write-sealed memfd read-only shared mappings", v4.
The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-
Furthermore, trying to create new shared, writable memory-mappings via
mmap(2) will also fail with EPERM.
With emphasis on 'writable'. In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.
This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].
This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.
It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e. whether it is possible that this mapping could at any
point be written to.
If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only. It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.
We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag. To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.
There is a general assumption that VMAs with the VM_SHARED flag set are
writable. If the VM_MAYWRITE flag is not set, then this is simply not the
case.
Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.
This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.
Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Suggested-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org
[isaacmanjarres: resolved merge conflicts due to
due to refactoring that happened in upstream commit 5de195060b2e ("mm: resolve faulty mmap_region() error path behaviour")] Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mptcp_disconnect() clears the fallback bit unconditionally, without
touching the associated flags.
The bit clear is safe, as no fallback operation can race with that --
all subflow are already in TCP_CLOSE status thanks to the previous
FASTCLOSE -- but we need to consistently reset all the fallback related
status.
Also acquire the relevant lock, to avoid fouling static analyzers.
Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-3-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in protocol.c, because commit ebc1e08f01eb ("mptcp: drop
last_snd and MPTCP_RESET_SCHEDULER") is not in this version and
changed the context. The same modification can still be applied at the
same place. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes: 478d770008b0 ("mptcp: send out MP_FAIL when data checksum fails") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in subflow.c, because commit f1f26512a9bf ("mptcp: use plain
bool instead of custom binary enum") and commit 46a5d3abedbe
("mptcp: fix typos in comments") are not in this version. Both are
causing conflicts in the context, and the same modifications can still
be applied. Same in protocol.h with commit b8dc6d6ce931 ("mptcp: fix
rcv buffer auto-tuning"). Conflicts in protocol.c because commit ee2708aedad0 ("mptcp: use get_retrans wrapper") is not in this version
and refactor the code in __mptcp_retrans(), but the modification can
still be applied, just not at the same indentation level. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we need to track the 'fallback is possible' condition and the
fallback status separately, there are a few possible races open between
the check and the actual fallback action.
Add a spinlock to protect the fallback related information and use it
close all the possible related races. While at it also remove the
too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect():
the field will be correctly cleared by subflow_finish_connect() if/when
the connection will complete successfully.
If fallback is not possible, as per RFC, reset the current subflow.
Since the fallback operation can now fail and return value should be
checked, rename the helper accordingly.
Fixes: 0530020a7c8f ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reported-by: Matthieu Baerts <matttbe@kernel.org> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/570 Reported-by: syzbot+5cf807c20386d699b524@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/555 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-1-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in protocol.h, because commit 6ebf6f90ab4a ("mptcp: add
mptcpi_subflows_total counter") is not in this version, and this
causes conflicts in the context. Commit 65b02260a0e0 ("mptcp: export
mptcp_subflow_early_fallback()") is also not in this version, and
moves code from protocol.c to protocol.h, but the modification can
still apply there. Conflicts in protocol.c because commit ee2708aedad0
("mptcp: use get_retrans wrapper") is not in this version and refactor
the code in __mptcp_retrans(), but the modification can still be
applied, just not at the same indentation level. There were other
conflicts in the context due to commit 8005184fd1ca ("mptcp: refactor
sndbuf auto-tuning"), commit b3ea6b272d79 ("mptcp: consolidate initial
ack seq generation"), and commit 013e3179dbd2 ("mptcp: fix rcv space
initialization") that are not in this version. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 872768800652 ("KVM: x86: select IRQ_BYPASS_MANAGER") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: account for lack of kvm_x86_call()] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable ECBHB bits in ID_AA64MMFR1 register as per ARM DDI 0487K.a
specification.
When guest OS read ID_AA64MMFR1_EL1, kvm emulate this reg using
ftr_id_aa64mmfr1 and always return ID_AA64MMFR1_EL1.ECBHB=0 to guest.
It results in guest syscall jump to tramp ventry, which is not needed
in implementation with ID_AA64MMFR1_EL1.ECBHB=1.
Let's make the guest syscall process the same as the host.
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com> Link: https://lore.kernel.org/r/20240611122049.2758600-1-tangnianyao@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Patrick Roy <roypat@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 4xxx drivers hardcode the ring to service mapping. However, when
additional configurations where added to the driver, the mappings were
not updated. This implies that an incorrect mapping might be reported
through pfvf for certain configurations.
Add an algorithm that computes the correct ring to service mapping based
on the firmware loaded on the device.
Fixes: 0cec19c761e5 ("crypto: qat - add support for compression for 4xxx") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[Giovanni: backport to 6.1.y, conflict resolved simplifying the logic
in the function get_ring_to_svc_map() as the QAT driver in v6.1 supports
only limited configurations (crypto only and compression). Differs from
upstream as the ring to service mapping is hardcoded rather than being
dynamically computed.] Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Tested-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new
btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
# --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
# +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
# @@ -1,2 +1,6 @@
# QA output created by 508
# Silence is golden
# +Before:
# +After : stat.btime = Thu Jan 1 09:30:00 1970
# +Before:
# +After : stat.btime = Wed Jul 2 14:53:22 2025
# ...
# (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)
Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test
case will be skipped using the current upstream kernel, as it doesn't
have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
Improve the description of the possible default SATA link power
management policies and add the missing description for policy 5.
No functional changes.
Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <cassel@kernel.org>
[ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both `ec_dev->ec` and `ec_dev->pd` are initialized to NULL at the
beginning of cros_ec_register(). Also, platform_device_unregister()
takes care if the given platform_device is NULL.
The actual dependency chains are much longer. The shortened version
looks somewhat like:
1. cros-ec-rpmsg on mtk-scp
ec_dev->lock -> prepare_lock
2. In rt5682_i2c_probe() on native I2C bus:
prepare_lock -> regmap->lock -> (possibly) i2c_adapter->bus_lock
3. In rt5682_i2c_probe() on native I2C bus:
regmap->lock -> i2c_adapter->bus_lock
4. In sbs_probe() on i2c-cros-ec-tunnel I2C bus attached on cros-ec:
i2c_adapter->bus_lock -> ec_dev->lock
While lockdep is correct that the shared lockdep classes have a circular
dependency, it is bogus because
a) 2+3 happen on a native I2C bus
b) 4 happens on the actual EC on ChromeOS devices
c) 1 happens on the SCP coprocessor on MediaTek Chromebooks that just
happens to expose a cros-ec interface, but does not have an
i2c-cros-ec-tunnel I2C bus
In short, the "dependencies" are actually on different devices.
Setup a per-device lockdep key for cros_ec devices so lockdep can tell
the two instances apart. This helps with getting rid of the bogus
lockdep warning. For ChromeOS devices that only have one cros-ec
instance this doesn't change anything.
Also add a missing mutex_destroy, just to make the teardown complete.
[1] This is likely the per I2C bus lock with shared lockdep class
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Currently, The event_seq_changed() handler processes a variable number
of properties sent by the firmware. The number of properties is indicated
by the firmware and used to iterate over the payload. However, the
payload size is not being validated against the actual message length.
This can lead to out-of-bounds memory access if the firmware provides a
property count that exceeds the data available in the payload. Such a
condition can result in kernel crashes or potential information leaks if
memory beyond the buffer is accessed.
Fix this by properly validating the remaining size of the payload before
each property access and updating bounds accordingly as properties are
parsed.
This ensures that property parsing is safely bounded within the received
message buffer and protects against malformed or malicious firmware
behavior.
Currently we have macros to access these, but they don't provide a
way to override the remapped fields. Replace the macros with actual
get/set pairs to fix that.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: 06d6770ff0d8 ("media: venus: Fix OOB read due to missing payload bound check") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory hot remove unmaps and tears down various kernel page table regions
as required. The ptdump code can race with concurrent modifications of
the kernel page tables. When leaf entries are modified concurrently, the
dump code may log stale or inconsistent information for a VA range, but
this is otherwise not harmful.
But when intermediate levels of kernel page table are freed, the dump code
will continue to use memory that has been freed and potentially
reallocated for another purpose. In such cases, the ptdump code may
dereference bogus addresses, leading to a number of potential problems.
To avoid the above mentioned race condition, platforms such as arm64,
riscv and s390 take memory hotplug lock, while dumping kernel page table
via the sysfs interface /sys/kernel/debug/kernel_page_tables.
Similar race condition exists while checking for pages that might have
been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages
which in turn calls ptdump_check_wx(). Instead of solving this race
condition again, let's just move the memory hotplug lock inside generic
ptdump_check_wx() which will benefit both the scenarios.
Drop get_online_mems() and put_online_mems() combination from all existing
platform ptdump code paths.
Link: https://lkml.kernel.org/r/20250620052427.2092093-1-anshuman.khandual@arm.com Fixes: bbd6ec605c0f ("arm64/mm: Enable memory hot remove") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify()
after recent changes from Lion [2]. The problem is: in ets_qdisc_change()
we purge unused DWRR queues; the value of 'q->nbands' is the new one, and
the cleanup should be done with the old one. The problem is here since my
first attempts to fix ets_qdisc_change(), but it surfaced again after the
recent qdisc len accounting fixes. Fix it purging idle DWRR queues before
assigning a new value of 'q->nbands', so that all purge operations find a
consistent configuration:
- old 'q->nbands' because it's needed by ets_class_find()
- old 'q->nstrict' because it's needed by ets_class_is_strict()
Instead of relying on RTNL, ets_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in ets_change().
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 87c6efc5ce9c ("net/sched: ets: use old 'nbands' while purging unused classes") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001 CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[ Replaced get_cur_inode_path() with fs_path_alloc() and get_cur_path() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c52798 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags") Cc: <stable@vger.kernel.org> # v5.19 Reported-by: cen zhang <zzzccc427@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Daniel Vacek <neelx@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/ CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[ Check for BTRFS_FS_QUOTA_ENABLED, instead of btrfs_qgroup_full_accounting() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed") Cc: <stable@vger.kernel.org> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
[ Kept both int rc and int retry variables ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_bridge_d3_possible() is called from both pcie_portdrv_probe() and
pcie_portdrv_remove() to determine whether runtime power management shall
be enabled (on probe) or disabled (on remove) on a PCIe port.
The underlying assumption is that pci_bridge_d3_possible() always returns
the same value, else a runtime PM reference imbalance would occur. That
assumption is not given if the PCIe port is inaccessible on remove due to
hot-unplug: pci_bridge_d3_possible() calls pciehp_is_native(), which
accesses Config Space to determine whether the port is Hot-Plug Capable.
An inaccessible port returns "all ones", which is converted to "all
zeroes" by pcie_capability_read_dword(). Hence the port no longer seems
Hot-Plug Capable on remove even though it was on probe.
The resulting runtime PM ref imbalance causes warning messages such as:
Avoid the Config Space access (and thus the runtime PM ref imbalance) by
caching the Hot-Plug Capable bit in struct pci_dev.
The struct already contains an "is_hotplug_bridge" flag, which however is
not only set on Hot-Plug Capable PCIe ports, but also Conventional PCI
Hot-Plug bridges and ACPI slots. The flag identifies bridges which are
allocated additional MMIO and bus number resources to allow for hierarchy
expansion.
The kernel is somewhat sloppily using "is_hotplug_bridge" in a number of
places to identify Hot-Plug Capable PCIe ports, even though the flag
encompasses other devices. Subsequent commits replace these occurrences
with the new flag to clearly delineate Hot-Plug Capable PCIe ports from
other kinds of hotplug bridges.
Document the existing "is_hotplug_bridge" and the new "is_pciehp" flag
and document the (non-obvious) requirement that pci_bridge_d3_possible()
always returns the same value across the entire lifetime of a bridge,
including its hot-removal.
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
submit_bio_noacct allows completely invalid operations, or operations
that are not supported in the bio path. Extent the existing switch
statement to rejcect all invalid types.
Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the
middle of the zone management operations and the switch statement can
follow the numerical order of the operations.
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 3f66ccbaaef3 ("block: Make REQ_OP_ZONE_FINISH a write operation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make fscrypt no longer use Crypto API drivers for non-inline crypto
engines, even when the Crypto API prioritizes them over CPU-based code
(which unfortunately it often does). These drivers tend to be really
problematic, especially for fscrypt's workload. This commit has no
effect on inline crypto engines, which are different and do work well.
Specifically, exclude drivers that have CRYPTO_ALG_KERN_DRIVER_ONLY or
CRYPTO_ALG_ALLOCATES_MEMORY set. (Later, CRYPTO_ALG_ASYNC should be
excluded too. That's omitted for now to keep this commit backportable,
since until recently some CPU-based code had CRYPTO_ALG_ASYNC set.)
There are two major issues with these drivers: bugs and performance.
First, these drivers tend to be buggy. They're fundamentally much more
error-prone and harder to test than the CPU-based code. They often
don't get tested before kernel releases, and even if they do, the crypto
self-tests don't properly test these drivers. Released drivers have
en/decrypted or hashed data incorrectly. These bugs cause issues for
fscrypt users who often didn't even want to use these drivers, e.g.:
These drivers have also similarly caused issues for dm-crypt users,
including data corruption and deadlocks. Since Linux v5.10, dm-crypt
has disabled most of them by excluding CRYPTO_ALG_ALLOCATES_MEMORY.
Second, these drivers tend to be *much* slower than the CPU-based code.
This may seem counterintuitive, but benchmarks clearly show it. There's
a *lot* of overhead associated with going to a hardware driver, off the
CPU, and back again. To prove this, I gathered as many systems with
this type of crypto engine as I could, and I measured synchronous
encryption of 4096-byte messages (which matches fscrypt's workload):
So, there was no case in which the crypto engine was even *close* to
being faster. On the first three, which have AES instructions in the
CPU, the CPU was 30 to 55 times faster (!). Even on STM32MP157F-DK2
which has a Cortex-A7 CPU that doesn't have AES instructions, AES was
over 4 times faster on the CPU. And Adiantum encryption, which is what
actually should be used on CPUs like that, was over 17 times faster.
Other justifications that have been given for these non-inline crypto
engines (almost always coming from the hardware vendors, not actual
users) don't seem very plausible either:
- The crypto engine throughput could be improved by processing
multiple requests concurrently. Currently irrelevant to fscrypt,
since it doesn't do that. This would also be complex, and unhelpful
in many cases. 2 of the 4 engines I tested even had only one queue.
- Some of the engines, e.g. STM32, support hardware keys. Also
currently irrelevant to fscrypt, since it doesn't support these.
Interestingly, the STM32 driver itself doesn't support this either.
- Free up CPU for other tasks and/or reduce energy usage. Not very
plausible considering the "short" message length, driver overhead,
and scheduling overhead. There's just very little time for the CPU
to do something else like run another task or enter low-power state,
before the message finishes and it's time to process the next one.
- Some of these engines resist power analysis and electromagnetic
attacks, while the CPU-based crypto generally does not. In theory,
this sounds great. In practice, if this benefit requires the use of
an off-CPU offload that massively regresses performance and has a
low-quality, buggy driver, the price for this hardening (which is
not relevant to most fscrypt users, and tends to be incomplete) is
just too high. Inline crypto engines are much more promising here,
as are on-CPU solutions like RISC-V High Assurance Cryptography.
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c89 ("drm/amdgpu: drop a dummy wakeup scheduler") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Lin.Cao <lincao12@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org> Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Reported-by: Cristian Prundeanu <cpru@amazon.com> Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt") Tested-by: Cristian Prundeanu <cpru@amazon.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com Signed-off-by: Will Deacon <will@kernel.org>
[ removed duplicate save_and_disable_daif macro ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper
flags and language target"), which updated as-instr to use the
'assembler-with-cpp' language option, the Kbuild version of as-instr
always fails internally for arch/arm with
<command-line>: fatal error: asm/unified.h: No such file or directory
compilation terminated.
because '-include' flags are now taken into account by the compiler
driver and as-instr does not have '$(LINUXINCLUDE)', so unified.h is not
found.
This went unnoticed at the time of the Kbuild change because the last
use of as-instr in Kbuild that arch/arm could reach was removed in 5.7
by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support") but a
stable backport of the Kbuild change to before that point exposed this
potential issue if one were to be reintroduced.
Follow the general pattern of '-include' paths throughout the tree and
make unified.h absolute using '$(srctree)' to ensure KBUILD_AFLAGS can
be used independently.
Closes: https://lore.kernel.org/CACo-S-1qbCX4WAVFA63dWfHtrRHZBTyyr2js8Lx=Az03XHTTHg@mail.gmail.com/ Cc: stable@vger.kernel.org Fixes: d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper flags and language target") Reported-by: KernelCI bot <bot@kernelci.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ adapted to missing -Wa ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to allocate an ordered extent for a COW write we end up leaking
a qgroup data reservation since we called btrfs_qgroup_release_data() but
we didn't call btrfs_qgroup_free_refroot() (which would happen when
running the respective data delayed ref created by ordered extent
completion or when finishing the ordered extent in case an error happened).
So make sure we call btrfs_qgroup_free_refroot() if we fail to allocate an
ordered extent for a COW write.
Fixes: 7dbeaad0af7d ("btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[ adjust to code movements ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that sysfs init doesn't fail for new/unrecognized bank types or if
a bank has additional blocks available.
Most MCA banks have a single thresholding block, so the block takes the same
name as the bank.
Unified Memory Controllers (UMCs) are a special case where there are two
blocks and each has a unique name.
However, the microarchitecture allows for five blocks. Any new MCA bank types
with more than one block will be missing names for the extra blocks. The MCE
sysfs will fail to initialize in this case.
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision`
were assigned in commit d68c592e02f6 ("iio: hid-sensor-prox: Fix scale not
correct issue"), but due to a merge conflict in
commit 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"),
these assignments were lost.
Add back lost assignments and replace `st->prox_attr` with
`st->prox_attr[0]` because commit 596ef5cf654b ("iio: hid-sensor-prox: Add
support for more channels") changed `prox_attr` to an array.
Cc: stable@vger.kernel.org # 5.13+ Fixes: 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ changed st->prox_attr[0] array access to st->prox_attr single struct member ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350d3 ("mptcp: avoid processing packet if a subflow reset") Cc: stable@vger.kernel.org Signed-off-by: Christoph Paasch <cpaasch@openai.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.
The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.
I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.
hsr_handle_frame() then calls this sequence
hsr_forward_skb()
fill_frame_info()
hsr->proto_ops->fill_frame_info()
hsr_fill_frame_info()
hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues back in the hsr_forward_skb():
In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().
The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:
gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""
It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2
*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*
Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).
*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*
hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.
Cc: stable@kernel.org Fixes: 48b491a5cc74 ("net: hsr: fix mac_len checks") Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr
with the dce_clk_mgr, causing incorrect behaviour on DCE6.
Fix it by removing the extra dce_clk_mgr_construct.
Fixes: 62eab49faae7 ("drm/amd/display: hide VGH asic specific structs") Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbddcbe36a686af03e91341b9bbfcca94bd45fb6) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Gang Ba <Gang.Ba@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.
Clamp the param if the user provides a value that will result in an invalid
fps.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Closes: https://lore.kernel.org/linux-media/f11653a7-bc49-48cd-9cdb-1659147453e4@xs4all.nl/T/#m91cd962ac942834654f94c92206e2f85ff7d97f0 Fixes: aaaa93eda64b ("[media] media: venus: venc: add video encoder files") Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[bod: Change "parm" to "param"] Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.
Clamp the value if the user provides a param that will result in an invalid
fps.
Make sure the interrupt handler is initialized before the interrupt is
registered.
If the IRQ is registered before hfi_create(), it's possible that an
interrupt fires before the handler setup is complete, leading to a NULL
dereference.
This error condition has been observed during system boot on Rb3Gen2.
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access.
ov2659_probe() doesn't properly free control handler resources in failure
paths, causing memory leaks. Add v4l2_ctrl_handler_free() to prevent these
memory leaks and reorder the ctrl_handler assignment for better code flow.
Fixes: c4c0283ab3cd ("[media] media: i2c: add support for omnivision's ov2659 sensor") Cc: stable@vger.kernel.org Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the interrupt handler rain_interrupt(), the buffer full check on
rain->buf_len is performed before acquiring rain->buf_lock. This
creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as
rain->buf_len is concurrently accessed and modified in the work
handler rain_irq_work_handler() under the same lock.
Multiple interrupt invocations can race, with each reading buf_len
before it becomes full and then proceeding. This can lead to both
interrupts attempting to write to the buffer, incrementing buf_len
beyond its capacity (DATA_SIZE) and causing a buffer overflow.
Fix this bug by moving the spin_lock() to before the buffer full
check. This ensures that the check and the subsequent buffer modification
are performed atomically, preventing the race condition. An corresponding
spin_unlock() is added to the overflow path to correctly release the
lock.
This possible bug was found by an experimental static analysis tool
developed by our team.
Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
Fixes: 0e0fe3958fdd13d ("[media] usbtv: Add support for PAL video source") Cc: stable@vger.kernel.org Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pixel_array control size was calculated incorrectly:
the dimensions were swapped (dims[0] should be the height), and the
values should be the width or height divided by PIXEL_ARRAY_DIV
and rounded up. So don't use roundup, but use DIV_ROUND_UP instead.
This bug is harmless in the sense that nothing will break, except that
it consumes way too much memory for this control.
Add video_device_release() in label 'err_m2m' to release the memory
allocated by video_device_alloc() and prevent potential memory leaks.
Remove the reduntant code in label 'err_m2m'.
Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test pattern is set by a 8-bit register according to the
specification.
+--------+-------------------------------+
| BIT[0] | Solid color |
+--------+-------------------------------+
| BIT[1] | Color bar |
+--------+-------------------------------+
| BIT[2] | Fade to grey color bar |
+--------+-------------------------------+
| BIT[3] | PN9 |
+--------+-------------------------------+
| BIT[4] | Gradient horizontal |
+--------+-------------------------------+
| BIT[5] | Gradient vertical |
+--------+-------------------------------+
| BIT[6] | Check board |
+--------+-------------------------------+
| BIT[7] | Slant pattern |
+--------+-------------------------------+
Based on function above, current test pattern programming is wrong.
This patch fixes it by 'BIT(pattern - 1)'. If pattern is 0, driver
will disable the test pattern generation and set the pattern to 0.
Fixes: e62138403a84 ("media: hi556: Add support for Hi-556 sensor") Cc: stable@vger.kernel.org Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This sd_init() function reads the firmware. The firmware data holds a
series of records and the function reads each record and sends the data
to the device. The request_ihex_firmware() function
calls ihex_validate_fw() which ensures that the total length of all the
records won't read out of bounds of the fw->data[].
However, a potential issue is if there is a single very large
record (larger than PAGE_SIZE) and that would result in memory
corruption. Generally we trust the firmware, but it's always better to
double check.
Fixes: 49b61ec9b5af ("[media] gspca: Add new vicam subdriver") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
int main(int argc, char **argv)
{
unsigned long page_size = sysconf(_SC_PAGESIZE);
char *p = malloc(3 * page_size);
char *p_aligned;
/* initialize memory region. If not initialized, write syscall below will correctly return EFAULT. */
if (1)
memset(p, 'X', 3 * page_size);
p_aligned = (char *) ((((uintptr_t) p) + (2*page_size - 1)) & ~(page_size - 1));
/* Drop PROT_READ protection. Kernel and userspace should fault when accessing that memory region */
mprotect(p_aligned, page_size, PROT_NONE);
/* the following write() should return EFAULT, since PROT_READ was dropped by previous mprotect() */
int ret = write(2, p_aligned, 1);
if (!ret || errno != EFAULT)
printf("\n FAILURE: write() did not returned expected EFAULT value\n");
return 0;
}
Because of the way _PAGE_READ is handled, kernel code never generates
a read access fault when it access a page as the kernel privilege level
is always less than PL1 in the PTE.
This patch reworks the comments in the make_insert_tlb macro to try
to make this clearer.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use load and stbys,e instructions to trigger memory reference
interruptions without writing to memory. Because of the way read
access support is implemented, read access interruptions are only
triggered at privilege levels 2 and 3. The kernel and gateway
page execute at privilege level 0, so this code never triggers
a read access interruption. Thus, it is currently possible for
user code to execute a LWS compare and swap operation at an
address that is read protected at privilege level 3 (PRIV_USER).
Fix this by probing read access rights at privilege level 3 and
branching to lws_fault if access isn't allowed.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of the way read access support is implemented, read access
interruptions are only triggered at privilege levels 2 and 3. The
kernel executes at privilege level 0, so __get_user() never triggers
a read access interruption (code 26). Thus, it is currently possible
for user code to access a read protected address via a system call.
Fix this by probing read access rights at privilege level 3 (PRIV_USER)
and setting __gu_err to -EFAULT (-14) if access isn't allowed.
Note the cmpiclr instruction does a 32-bit compare because COND macro
doesn't work inside asm.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For building a 64-bit kernel, both 32-bit and 64-bit VDSO binaries
are built, so both 32-bit and 64-bit compilers (and tools) should be
in the PATH environment variable.
Because of the way the _PAGE_READ is handled in the parisc PTE, an
access interruption is not generated when the kernel reads from a
region where the _PAGE_READ is zero. The current code was written
assuming read access faults would also occur in the kernel.
This change adds user access checks to raw_copy_from_user(). The
prober_user() define checks whether user code has read access to
a virtual address. Note that page faults are not handled in the
exception support for the probe instruction. For this reason, we
precede the probe by a ldb access check.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
vhost_vsock_alloc_skb() returns NULL for packets advertising a length
larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE in the packet header. However,
this is only checked once the SKB has been allocated and, if the length
in the packet header is zero, the SKB may not be freed immediately.
Hoist the size check before the SKB allocation so that an iovec larger
than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + the header size is rejected
outright. The subsequent check on the length field in the header can
then simply check that the allocated SKB is indeed large enough to hold
the packet.
Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-2-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When receiving a vsock packet in the guest, only the virtqueue buffer
size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately,
virtio_vsock_skb_rx_put() uses the length from the packet header as the
length argument to skb_put(), potentially resulting in SKB overflow if
the host has gone wonky.
Validate the length as advertised by the packet header before calling
virtio_vsock_skb_rx_put().
Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-3-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An endpoint driver configfs attributes group is added to the
epf_group list of struct pci_epf_driver by pci_epf_add_cfs() but an
added group is not removed from this list when the attribute group is
unregistered with pci_ep_cfs_remove_epf_group().
Add the missing list_del() call in pci_ep_cfs_remove_epf_group()
to correctly remove the attribute group from the driver list.
With this change, once the loop over all attribute groups in
pci_epf_remove_cfs() completes, the driver epf_group list should be
empty. Add a WARN_ON() to make sure of that.
Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250624114544.342159-3-dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
Since commit 3d1f08b032dc ("mtd: spinand: Use the external ECC engine
logic") the spinand_write_page() function ignores the errors returned
by spinand_wait(). Change the code to propagate those up to the stack
as it was done before the offending change.
Commit ff67592cbdfc ("mtd: spi-nor: Introduce spi_nor_set_mtd_info()")
moved all initialization of the mtd fields at the end of spi_nor_scan().
Normally, the mtd info is only needed for the mtd ops on the device,
with one exception: spi_nor_try_unlock_all(), which will also make use
of the mtd->size parameter. With that commit, the size will always be
zero because it is not initialized. Fix that by not using the size of
the mtd_info struct, but use the size from struct spi_nor_flash_parameter.
The Linux hwmon sysfs API values for pwmX_auto_pointY_pwm represent an
integer value between 0 (0%) to 255 (100%) and the pwmX_auto_pointY_temp
represent millidegrees Celcius.
Commit a6d80df47ee2 ("hwmon: (gsc-hwmon) fix fan pwm temperature
scaling") properly addressed the incorrect scaling in the
pwm_auto_point_temp_store implementation but erroneously scaled
the pwm_auto_point_pwm_show (pwm value) instead of the
pwm_auto_point_temp_show (temp value) resulting in:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
25500
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
4500
Fix the scaling of these attributes:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
255
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
45000
Fixes: a6d80df47ee2 ("hwmon: (gsc-hwmon) fix fan pwm temperature scaling") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/20250718200259.1840792-1-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
according to my tests with a signal analyser and also the documentation.
The current algorithm doesn't consider the `+ 1` part and so configures
slightly too high periods. The same issue exists for the duty cycle
setting. So subtract 1 from both the register values for period and
duty cycle. If period is 0, bail out, if duty_cycle is 0, just disable
the PWM which results in a constant low output.
Stop handling the clocks in pwm_mediatek_enable() and
pwm_mediatek_disable(). This is a preparing change for the next commit
that requires that clocks and the enable bit are handled separately.
Also move these two functions a bit further up in the source file to
make them usable in pwm_mediatek_config(), which is needed in the next
commit, too.
As per the i.MX93 TRM, section 67.3.2.1 "MOD register update", the value
of the TPM counter does NOT get updated when writing MOD.MOD unless
SC.CMOD != 0. Therefore, with the current code, assuming the following
sequence:
1) pwm_disable()
2) pwm_apply_might_sleep() /* period is changed here */
3) pwm_enable()
and assuming only one channel is active, if CNT.COUNT is higher than the
MOD.MOD value written during the pwm_apply_might_sleep() call then, when
re-enabling the PWM during pwm_enable(), the counter will end up resetting
after UINT32_MAX - CNT.COUNT + MOD.MOD cycles instead of MOD.MOD cycles as
normally expected.
Fix this problem by forcing a reset of the TPM counter before MOD.MOD is
written.
Add the missing memory barriers to make sure that destination ring
descriptors are read before updating the tail pointer (and passing
ownership to the device) to avoid memory corruption on weakly ordered
architectures like aarch64 when the ring is full.
Add the missing memory barrier to make sure that LMAC source ring
descriptors are written before updating the head pointer to avoid
passing stale data to the firmware on weakly ordered architectures like
aarch64.
Note that non-LMAC rings use MMIO write accessors which have the
required write memory barrier.
Add the missing memory barrier to make sure that destination ring
descriptors are read after the head pointers to avoid using stale data
on weakly ordered architectures like aarch64.
The barrier is added to the ath11k_hal_srng_access_begin() helper for
symmetry with follow-on fixes for source ring buffer corruption which
will add barriers to ath11k_hal_srng_access_end().
A new warning in clang [1] complains that diq_start in
wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to
wlc_lcnphy_common_read_table():
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2728 | &diq_start, 1, 16, 69);
| ^~~~~~~~~
The table pointer passed to wlc_lcnphy_common_read_table() should not be
considered constant, as wlc_phy_read_table() is ultimately going to
update it. Remove the const qualifier from the tbl_ptr to clear up the
warning.
Change the buffer disable callback from postdisable to predisable.
This balances the existing posteanble callback. Using postdisable
with posteanble can be problematic, for example, if update_scan_mode
fails, it would call postdisable without ever having called posteanble,
so the drivers using this would be in an unexpected state when
postdisable was called.
Fixes: af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250703-iio-adc-ad_sigma_delta-buffer-predisable-v1-1-f2ab85138f1f@baylibre.com Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
